Trailing-Edge
-
PDP-10 Archives
-
BB-H138B-BM
-
language-sources/blis10.err
There are 28 other files named blis10.err in the archive. Click here to see a list.
?AOO 44 FROM-TO-BY-DO (arguments) out of order in INCR/DECR expression
?APE 13 An actual parameter expression should not be empty
?BEC 426 Bad expression constituent - structure,linkage,label
STRUCTURE NAME, LINKAGE NAME, LABEL, MACHOP , ... (5.200.19)
belmont, 751229
?CBO 30 Currect close bracket does not match open bracket
This message is paired with error ICP. This pointer marks the open
parentheses.
%CDB 412 Cannot do NAMES or INDEXES bind in a PLIT subject to duplication
Attempt at binding is ignored.
?CEE 631 Compile time expression error
?CER 777 Compiler error
?CNS 7 A control expression must not be used as a subexpression
%CSB 406 The compiler can't shrink back to original size after a compilation
%CSR 423 This construct is scheduled to be removed from BLISS-10
We suggest that you use an alternate implementation which does not
require this construct.
?DAU 621 Trying to declare a special register already in use
?DBH 25 Declarations are only allowed in a block head
%DBZ 201 Compile time (floating) division by zero
?DDM 142 Delimiters for this string of macro arguments do not match
?DNF 504 Device not found or could not do ascii input
%DSE 610 DREGS switch in module head not followed by equals sign
%EAA 637 Extra actuals passed to structure access
?EBE 65 Empty new-base expression in EXCHJ
?ECC 46 Empty condition in IF-THEN ELSE (conditional) not permitted
?ECD 37 Empty condition in WHILE-DO, DO-WHILE, or DO-UNTIL
?ECE 23 The constituent expressions of a complex expression should not be empty
?ECI 401 "ELSE" close bracket in this context is illegal
While evaluating a compound expression or block, we find an
expression whose close bracket is "ELSE". This is illegal.
BLISS-10 makes the assumption that it was the intent of the writer
to close the compound expression before the ELSE was encountered.
Therefore, BLISS-10 closes the compound expression on recovery and
BLISS-10 ERROR MESSAGES ... 7E(225) Page 2
continues processing at the ELSE operator.
?EDL 45 Empty DO part may not be defaulted in INCR/DECR loop
?EEL 50 Empty FROM, TO or BY expression in INCR/DECR loop
?EEP 53 Empty expression not permitted as pointer-pointer in special function
?EFL 171 Empty formal list in MACRO definition
%EIA 132 Extra incarnation actuals -- ignored
?ELE 62 Empty list element in SELECT expression
?END 627 Declared entry point is not defined
%EOC 764 Empty octal constant --- #0 assumed
?ESD 3 Expressions must be seperated by a delimiter
?ESE 1 Error in simple expression
?FNF 502 File not found
%FOI 766 Factoring of initial values not allowed
%FSO 767 Value in field selector outside permitted range
%GBC 404 A GLOBAL BIND must be to a compile time constant expression
Since this expression is not, we assume that this is a non-global
BIND and process it as such.
@GMA 403 Attempt to generate a machine address for an illegal type
The compiler has attempted to generate a machine address for an
identifier of illegal type (such as a special operator). If this
problem is encountered, it will most likely be the result of the
compiler's failure to detect an earlier syntax error.
@GTO 771 GT SAVEF overflow
%IAD 413 Identifier already declared as GLOBAL in another context
This GLOBAL declaration is ignored. Non-global declaration still
takes place.
?IAE 144 Invalid attempt to escape from routine or function
?IAL 141 Incarnation actual or resulting size expression is not a literal
?ICP 31 This pointer marks the incorrect close bracket; paired with error CBO.
?ICU 501 Invalid CMU userid, i.e. the CMUDEC algorithm failed
?ICV 36 Illegal control variable name in INCR or DECR
?IEC 636 Invalid escape character in string
BLISS-10 ERROR MESSAGES ... 7E(225) Page 3
%IED 765 Initialization exceeds data segment size
?IEE 21 Invalid escape expression
?IEF 135 Invalid expression in a FORWARD declaration
?IEM 136 Invalid expression in MACHOP declaration
?IES 500 Input error while reading a source file
%IFP 173 Illegal formal parameter
?IMC 147 The indirect field must be a compile time constant
The indirect field of a machine language statement must be a compile
time constant.
?IMN 170 Illegal MACRO name
%IPD 105 An identifier precedes a declaration; the identifier is ignored
?IPF 503 Invalid PPN format
?IRL 436 Redeclaration of linkagename for ROUTINE previously declared FORWARD
?ISE 616 Invalid size expression in stack or timer declaration
?ISU 601 Invalid switch use
?ITD 614 Invalid type in stack or timer declaration
%IUL 416 It is illegal to use a label in this context; the label is ignored
?IUP 435 Illegal use of PORTAL; PORTAL replaces GLOBAL in GLOBAL ROUTINE
?LAI 10 Left part of an assignment is incorrect
%LAU 420 This label has already been used in this block
This attempt to use it is ignored.
?LEE 57 Labeling expression of nset-element may not be empty
?LNL 51 Number of levels in escape expression is not a literal
%LNS 434 Linkagename not supported for FORWARD or EXTERNAL declarations
?LSC 634 May not use long string in this context
?LTE 632 Load time expression error
@LTO 774 Literal table overflow
?MAC 67 Missing AT in CREATE
?MCE 52 Missing "]" in number levels part of an escape expression
BLISS-10 ERROR MESSAGES ... 7E(225) Page 4
?MCF 54 Missing ")" in a special function
?MCJ 66 Missing ")" in EXCHJ
?MCM 150 Missing ")" in maching language expression
A machine language expression involving a name declared as a MACHOP
is missing its close parentheses.
?MCN 101 Missing ")" on a name par.
?MCS 60 Missing or misplaced ":" in a SELECT expression
?MCV 22 Missing control variable in INCR or DECR
?MDB 613 Module declaration within module body
?MDD 104 Missing "," ":" ";" (delimiter) in allocation declaration
?MDL 100 Missing delimiter on a list, i.e. "," or ";"
%MDS 174 Macro definition during macro expansion suppressed
%MEC 200 Missing exponent on floating constant; 0 assumed
?MED 75 Missing "=" on a routine, function, or structure declaration
?MEM 103 Missing "=" in a MACHOP declaration
?MEQ 624 Missing "=" in a special register declaration
%MER 622 Module errors; compilation starts at pointer
?MFD 76 Missing formal parameter list right delimiter, i.e. ")" "]" ","
?MIU 176 Macro in use at block purge time
?MLC 70 Missing AT-expression or LENGTH in CREATE
?MNS 56 Missing or misplaced 'NSET' in SELECT expression
?MOC 72 Missing "(" after CREATE
?MOE 64 Missing "(" after EXCHJ
?MOS 55 Missing "OF" in SELECT expression
?MRB 77 Missing right bracket on the size portion of a "namesize"
?MTC 71 Missing LENGTH-expression or THEN in CREATE
?MTH 47 Missing THEN
?MTP 625 Module declaration errors with a trivial program
?MTS 61 Missing or misplaced TESN in SELECT expression
BLISS-10 ERROR MESSAGES ... 7E(225) Page 5
?MUS 140 Attempting to map onto an undeclared structure
%NAD 411 This name has already been declared at this block level
This NAMES or INDEXES bind is ignored.
?NCB 2 Not the correct matching close bracket
?NDD 762 No declared registers available (declaration)
%NDG 425 Name is identical to declared global in first 6 characters
The compiler recovers by considering this instance an OWN
declaration.
?NDL 761 No declared registers available (INCR/DECR loop)
%NIG 414 The symbol NAMES or INDEXES must follow GLOBALLY in a PLIT
?NMS 137 May not map a symbol of this type
%NPB 410 There is no name preceding this NAMES or INDEXES bind; it is ignored
?NPD 633 Negative PLIT duplication factor
?NPL 417 The atom following LEAVE is not a proper label
?NSC 17 A null secector in a CASE expression is illegal
?NTA 760 No temporary register available
%OAS 402 No semicolon preceding OTHERWISE or ALWAYS -- assumed
An OTHERWISE or ALWAYS was encountered in a SELECT expression after
an NSET element which was not followed by a semicolon as required.
BLISS-10 assumes the semicolon and continues as if it were there all
along.
?OFE 4 An operator must be followed by a simple expression
%OMM 177 "(" missing on macro call
?OPD 6 A unary (binary) operator must (not) be preceded by a delimiter
?OSC 20 OF must be followed by SET in CASE statement
?OSE 421 Outside the scope of the expression labeled
?OWD 776 Operand pair without intervening delimiter
%PDG 424 Name is previously declared as a global in the first 6 characters
An attempt has been made to declare a name which is identical to a
previously declared global type name in the first six characters.
The compiler recovers by considering this instance an OWN ROUTINE
declaration.
%PLF 422 The parameter to OFFSET must be a local or formal variable name
If not, the value 0 will be returned for the value of the OFFSET
BLISS-10 ERROR MESSAGES ... 7E(225) Page 6
function.
?PMC 630 Plit missing right (close) parentheses
%PRC 763 Replication count in PLIT cannot be less than zero
@PTO 775 Pointer table overflow
?RAI 12 Right hand side of an assignment is incorrect
?RAU 617 Trying to reserve a register in use already
%RDG 427 Redeclared GLOBAL
(ERREDGLOBAL - FIXED 751230)
?RDL 432 Required delimiter missing in LINKAGE statement
(ERRRDLINK - 760107)
%RMC 175 Recursive macro call
?RML 146 Register position of a machine operation must be a literal
%RNB 606 The RESERVE statement must be bracketed by parentheses
?RNC 612 Register name not a compile time constant in range 0-15
?RNL 130 Register number is not a literal
%RNR 5 A relational expression must not be followed by a relational operator
%RNT 126 Register is neither reserved nor 'system' type
See MODULE declaration.
?RNV 620 Special register register-number not valid
%ROR 127 Register value out of range (0-15)
?RTD 505 REQUIRE declarations nested more than four levels (too deep)
@RTO 772 Reg. table use field overflow
%RUI 437 Reference to undeclared identifier is illegal
%SAI 106 Structure access not to an identifier, i.e. 1[e], 'vector' assumed
?SED 615 Syntax error in stack or timer declaration
?SEE 15 A subscript expression should not be empty
?SES 626 Syntax errors in entries switch
?SEV 640 Syntax errors in version construct
?SFD 14 A simple expression should be followed by a delimiter
BLISS-10 ERROR MESSAGES ... 7E(225) Page 7
?SMQ 635 String missing right quote
?SMS 602 Switches declaration is missing its terminating semicolon
?SNB 133 Size expression must not be a block
?SNE 63 'SET' is not an allowed expression beginner
?SNI 74 Symbol to be declared is not an identifier
?SNL 433 Symbol is not a linkagename as is required
?SNM 134 Symbol may not be addressed, and hence may not be mapped
?SNU 603 This switch name is unknown by this compiler
?SPD 143 Symbol previously declared in the currect context (block level)
%TFA 415 Too few actual parameters in structure access
On a structure access, the number of actual parameters passed was
less than the number of formals in the structure declaration.
Zeroes are assumed for the missing actuals.
?TFS 405 Over 15 formal parameters appear in this structure declaration
?TMA 11 Too many _'s (implementation allows 8)
?TMB 42 Too many close brackets, or not enough open brackets
The compiler exited to the highest level before the EOF on the input
file.
?TMC 407 Too many characters in the input line (more than 135)
The line will not fit into the line buffer, shorten it and try
again.
?TMF 172 Too many formals in macro formal list (more than 31)
%TMI 145 Warning: using a temporary register may invalidate code
?TMP 41 Too many parameters in a pointer expression
%TMR 623 Too many registers already reserved
The number of reserved registers plus the number of special
registers (4) plus the number of declarable registers (DREGS)
exceeds 12. This register reservation is, therefore, ignored. The
compiler requires at least four temporaries in addition to reserved
plus special plus declarable registers.
?TMS 16 Too many subscripts (implementation allows 8)
?UAC 770 The compiler is unable to acquire additional core necessary
@UCO 773 Graph table UCCF overflow
?UDS 430 Undotted appearance of structure name is illegal
BLISS-10 ERROR MESSAGES ... 7E(225) Page 8
%UID 0 Undeclared identifier
?ULA 40 Illegal up level addressing
Specifically, when the compiler sees a reference to an identifier of
type local, formal, function, structure formal, or a bind while is
not a compile time constant expression, it tests to insure that the
identifiers have not been declared at a level outside (lower than)
that of the latest routine declaration. Since all of the above
types are referenced via the stack, displays are required in order
to keep track of the stack reference pointer at outer levels. Since
the displays are not available within a routine, it is impossible to
reference specific stack positions which are set aside in outer
blocks.
?ULS 431 Use of uplevel structure formal is illegal
?UNO 400 A special unary operator was not followed by an open parentheses
A special unary operator appeared in the text, and was not followed
by an open parentheses. The special unary operators are the
character manipulation functions (SCANN, REPLACEI, etc.). MACHOP
not in declarations, and the special functions SIGN, ABS, FIRSTONE
and OFFSET. Since the special unary operators are analogous to
function calls, they require an argument list. Since they are
special functions, there is no machine address associated with the
name, therefore, the name alone has no meaning and is illegal.
%VNM 131 Attempted structure access to a variable which has not been mapped
The default structure 'VECTOR' is assumed.
%WTB 43 Too many close brackets, recovery attempted
[End of BLIS10.ERR]