Trailing-Edge
-
PDP-10 Archives
-
BB-F494Z-DD_1986
-
10,7/opser.mac
There are 4 other files named opser.mac in the archive. Click here to see a list.
;
;-----------------------------------------------------------------------
;
TITLE OPSER - OPERATOR SERVICE PROGRAM - %5E(133)
SUBTTL FRANK NATOLI/DAL/PFC/DAL/JE/RHR/CDO/CGN/DC/MRB 22-AUG-85
SEARCH UUOSYM
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1970,1971,1972,1973,1974,1975,1976,1977,1978,1979,1980,1984,1985,1986. ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE. THIS SOFTWARE OR ANY OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON. NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT NOTICE
;AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY OF ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
;
;-----------------------------------------------------------------------
;
IFNDEF FTAUTO,<FTAUTO==-1> ;AUTO COMMAND FILE PROCESSOR
IFNDEF FTTLOG,<FTTLOG==-1> ;LOG OF TELETYPE ACTIVITY
IFE FTTLOG,<DSKOUT==CPOPJ> ;MAKE NO-OP OF CALLS
IFNDEF PDLSIZ,<PDLSIZ==40> ;SIZE OF PUSHDOWN LIST
IFNDEF HGHPTY,<HGHPTY==14> ;NBR OF SUBJOBS MINUS ONE
IFNDEF SNOOZT,<SNOOZT==1> ;ST SLEEP TIME WHEN WAITING
IFNDEF MOSTBF,<MOSTBF==^D30> ;MOST CONSEC BUFFERS FROM PTY
IFNDEF CHANCE,<CHANCE==3> ;SECS WILL WAIT FOR PTY TO WAKE
IFNDEF TYPTIM,<TYPTIM==^D45> ;SECS REQUIRED TO TYPE LINE
IFNDEF MAXCTC,<MAXCTC==4> ;MAX NBR ^C'S TO WAKE JOB
IFNDEF LINSIZ,<LINSIZ==^D134> ;MAX CHARS/LINE
IFNDEF DSKSIZ,<DSKSIZ==203> ;ST SIZE OF DISK BUFFER
IFNDEF PTYSIZ,<PTYSIZ==23> ;ST SIZE OF TTY BUFFER
NPTLTH==-<HGHPTY+1>
;
;-----------------------------------------------------------------------
;
;VERSION NUMBERS
VWHO==:0 ;WHO LAST EDITED THIS FILE
VOPSER==:5 ;OPSER VERSION NUMBER
VMINOR==:5 ;MINOR VERSION NUMBER
VEDIT==:133 ;EDIT NUMBER
.JBVER==:137
LOC .JBVER ;JOB VERSION
BYTE (3)VWHO(9)VOPSER(6)VMINOR(18)VEDIT
RELOC
;
;-----------------------------------------------------------------------
;
TWOSEG ;RE-ENTRANT HISEG
RELOC 400000 ;START HISEG HERE
;
;-----------------------------------------------------------------------
;
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1970,1986. ALL RIGHTS RESERVED.
\;END COPYRIGHT MACRO
SUBTTL EDIT HISTORY
;27) MAKE AUTO FILE PROCESSING MORE RELIABLE WHEN USING TIME
; OF DAY AUTO FILES.
;30) INCLUDE THE FILE NAME OF THE TIME OF DAY AUTO FILE IN THE
; OUTPUT FROM :WHAT
;31) ADD 2 NEW FLAVORS OF TIME OF DAY AUTO FILE. THESE ARE
; />HHMM = RUN AT HH+24:MM IF IT IS ALREADY PAST HH:MM
; /<HHMM = IGNORE IF IT IS ALREADY PAST HH:MM
; [SPR 10-8981]
;32) RACE CONDITION IN AUTO FILE PROCESSING CAUSED STRANGE
; RESULTS. [SPR 10-8047]
;33) ALLOW OPSER TO READ AUTO FILES WITH SEQUENCE NUMBERS
; [SPR 10-9072]
;34) ADD ":SCHED", ":TIME" AND ":WHERE" TO COMMAND TABLE.
; ALSO ADD ":RES" AS AN ABBREVIATION FOR ":RESOURCES" AND
; ":W", ":WH" AND ":WHA" AS ABBREVIATIONS FOR ":WHAT"
; [SPR 10-9072]
;35) CLEAN UP DAEMON LOGIC FOR BOTH KSYS AND AUTO FILES.
; [SPR 10-9072]
;36) CORRECT A PROBLEM IN PTY HANDLING WHICH CAUSED ":SLOG"
; TO TYPE THE LOGIN MESSAGE ON A BUSY SYSTEM.
; [SPR 10-9072]
;37) ALLOW :TTYTST TO WORK IN AN AUTO FILE
; [SPR 10-9072]
;40) MODIFY OPSER SO THAT CONTROL-C DOES NOT CHANGE THE
; DEFAULT SUBJOB.
; [SPR 10-10314]
;41) :SL 10/251 DOES NOT WORK. DIAGNOSIS: OPSER THINKS 'L'
; IS A VALID MONITOR COMMAND. CURE: ADD SLO TO THE
; COMMAND TABLE.
; [10-10315]
;42) CAN CONTROL-C OUT OF OPSER IF KSYS IS PENDING. CURE: ADD
; A WARNING TO :EXIT THAT A
; KSYS IS PENDING.
; [SPR 10-10403]
;43) FIX KSYS TO KILL ALL THE USERS IT SHOULD KILL AND NEVER
; HARM ANYONE ELSE.
; [SPR 10-10403]
;44) IMPROVE EDIT 30
;45) EDITS 31 AND 35 INTERACT BADLY. FIX SO THAT "%SUPER..."
; IS ONLY PRINTED IF THIS AUTO REQUEST IS SUPERSEDING
; A PREVIOUS REQUEST
;46) EDIT NEVER MADE
;47) FIX EDIT 42
;50) CONFORM TO THE STANDARD MESSAGE FORMAT
;51) ELIMINATES LOST MESSAGES FOR :KSYS COMMAND
; (THIS ERROR OCCURED WITH CERTAIN :KSYS ARGUMENTS)
; AREAS AFFECTED: SETK1 SPR#10-12208
;52) MAKE OPSER HANDLE ":SLOG<SPACE><CR-LF>" CORRECTLY
;53) IN LOGIN CMMD, MAKE OPSER RETURN TO COMMAND MODE WHEN THE TTY
; IS IN INPUT WAIT AND NOT NECESSARILY IN MONITOR MODE IN
; THE CASE THAT A PASSWORD IS REQUIRED
;54) MAKE ERROR MESSAGES COME OUT TO THE OPERATOR EVEN IF IN AUTO FILES
;55) ALLOW MORE THAN ONE DEV TO BE ENTERED ON :RESTRICT AND :UNRESTRICT
; SPR#11915
; AREAS AFFECTED:DEVRST,DEVURS
;56) MORE OF EDIT 32, FIX FOR RACE CONDITION WAS AN OVER KILL
; SPR#13046
;57) PREVENT KSYS FROM HAPPENING FOR ANYBODY BUT 'OPR'
;60) FIX HALT IN KSYS CAUSED BY EDIT 43
;61) ADD TIME VALUE TO HIBER FOR PTY ROUTINE: DUMPT
;62) MORE OF EDIT 60
;63) OPSER 5A(63) SENT TO FIELD TEST SEPTEMBER 1974
;64) FIXES GENERATED BY FIELD TEST QARS
; GUARANTEE HIBER TIME FOR KSYS AT IOENDM
; WRONG HIBER MASK AT DUMPT1
; INCLUDE "%" FOR :ERROR
; RESET :ERROR AT THE PROPER TIME
; ADD BITS TO BE CLEAR ON REENTER
; ONLY PRINT "NEXT AUTO FILE" ON A :WHAT ALL
; TERMINATE WAIT FOR OPR TYPEIN IF ^U'ED OR RUBBED OUT
; :HELP COULD "?ILL UUO", FIX IT
; GIVE "TOO FEW ARGS" ON ":SET<CR>"
; ALWAYS TYPED "SUPERSEDING PREVIOUS AUTO FILE", SAY IT ONLY IF TRUE
;65) "SAVER" IS A SON-OF-DAEMON, DON'T KSYS IT
;66) ADD ":MONITOR" FOR EMERGENCY EXITS, ":MONITO" MUST BE TYPED TO BE EFFECTIVE
; THE ":" AFTER THE DEVICE NAME ON ":RESTRICT" AND ":UNRESTRICT" IS OPTIONAL
; AT "EWORLD", CLEAR KSYS PENDING, KSYS IS OVER
; ADD "/VD:D" ON KSYS STRING FOR KJOB, KJOB DEFAULTS TO "/VD:R"
; CORRECT A TYPO IN THE OPRCKJ CODE AT RPTY
;67) OPSER 5A(67) RELEASED TO THE FIELD JANUARY 1975
;70) BECOME VERSION 5B
;71) USE THE CORRECT KJOB STRING IF ON A GALAXY-10 SYSTEM
;72) USE A TIMER WHEN WAITING FOR A SUBJOB DURING AUTO FILES
; SEE EDITS 32 AND 56
;73) OPSER 5B(73) RELEASED TO THE FIELD AUGUST 1975
;74) BECOME VERSION 5C
;75) IPTY DOESN'T QUITE DO THE RIGHT THING IF THE ONLY FREE PTY'S ARE
; BEYOND 'PTY77' ( LARGE MONITOR )
;76) DO SOME WORK ON "KSYS" CODE, DON'T KILL ANY [1,2]
; JOBS THAT MAY BE AROUND. THEY ARE PROBABLY USEFUL AND NEW ONES
; KEEP GETTING ADDED. 6.03 ADDED "FILDAE" AND "MIC"
;77) EDIT NOT MADE
;100) FORCE ERROR OUTPUT FROM LOGIN EVEN IF :SLOG
; [SPR 10-17930]
;101) EDITS 41 & 52 RE-DONE
; [SPR 10-17891]
;102) EDIT NOT MADE
;103) "M -TEXT" (NOTE BLANK) CONFUSED OPSER. THIS IS ACTUALLY INPUT
; TO THE LAST SUBJOB USED SINCE IT IS CLEARLY NOT IN COMMAND FORMAT.
; ALSO "0 -" AND "00 -" PRODUCED DIFFERENT RESULTS, FIX THAT TOO
; [SPR 10-20369]
;104) OPSER SUPRESSES LEADING SPACES ON TYPIN TO SUBJOB
; [SPR 10-21399]
;105) :KSYS<SP><CR> CAUSES KSYS TO BE SET TO MIDNIGHT, NO CANCELLED
;106) OPSER WAS A LITTLE SLOW RECOVERING FROM CONTROL-C'S.
; [SPR 10-25520]
;107) OPSER LEFT SUBJOBS RUNNING LOGIN WHEN LOGIN FAILED.
; [SPR 10-24809]
;110) WHEN :LOGIN FAILS WITH NO FREE SUBJOBS, THE CURRENT SUBJOB
; REMAINS SET TO THE LAST SUBJOB USED BEFORE THE FAILED :LOGIN.
; [SPR 10-24596]
;111) OVERFLOW OCCURS WHILE CONVERTING THE SYSTEM UP TIME TO
; MILLISECONDS IF THE SYSTEM HAS BEEN UP FOR 160
; CONSECUTIVE HOURS OR LONGER.
; [SPR 10-27243]
;112) IF AN .ATO FILE HAS SEQUENCE NUMBERS, THE SEQUENCE NUMBER
; WILL BE THROWN AWAY BUT THE BYTE COUNT IN THE BUFFER HEADER
; DOESN'T ADJUST CORRECTLY.
; [SPR 10-27401]
;113) AT KSYS TIME OPSER FAILS TO KILL ALL THE JOBS.
; [SPR 10-26985]
;114) EDIT 113 DETACHED AND KSYS'ED BATCH JOBS, DON'T DO THAT
;115) FOR INITIA STARTED OPSER ON NETWORK LINES, USE "nnnlll".ATO INSTEAD
; OF "TTYxxx".ATO BECAUSE LINE NUMBERS ARE DYNAMIC.
;116) RESERVED FOR DEC.
;117) GETTAB FOR UPTIME IS WRONG FOR SMP, USES CPU0 UPTIME, GET SYSTEM UPTIME
; INSTEAD
;120) RESERVED FOR DEC.
;121) REMOVE EDIT 107 DONT KILL SUBJOBS THAT FAILED ON LOGIN.
; REMOVE ASCII 175 176 FROM BREAKLIST SPR 10-29319
; 15-APR-81 MRB
;122) CHANGE STTYIN TO SKIP OVER TAB'S ALSO (SPR 10-30882, MRB 15-APR-81)
;123) PROBLEM WITH THE :AUTO COMMAND USING THE TIME SWITCH.
; NEEDED A SPACE AFTER WORD :AUTO AND BEFORE THE SLASH.
; 29-MAY-81 MRB SPR# 10-31102 @COMDEC+1,TIMEAF+2.
;124) UUOSYMIZED OPSER (ADDED STANDARD UUOSYM NAMES TO OPSER)
; 15-JUN-81 MRB NO SPR
;125) MAKE OPSER SOURCE PRETTY (NO SPR)
; RESEQUENCED DISPATCH TABLE. ADDED ---- TO SEGMENT ROUTINES
;126) CHANGE TO LOOK AT CONFIG TABLE RATHER THAN PID OF QUASAR
; FOR PTY LOGOUTS. 25-NOV-81, MRB, 10-31685
;127) CORRECT EDIT 126. AFTER LOOKING AT CONFIG STATUS WORD
; CHECK THE PROPER BIT. 12-JAN-82, MRB, 10-#####
;130) ADD CODE FOR KSYS MESSAGE. BECOME VERSION 17E.
;131) ADD CODE TO CONVERT CONTROL E TO AN ESCAPE
; BEFORE SENDING IT TO THE SUBJOB.
;132 None. BAH 2-Oct-84
; Update copyrights.
;133) None. LEO 22-Aug-85
; Do Copyrights.
;
;[END REVISION HISTORY]
;
;-----------------------------------------------------------------------
;-----------------------------------------------------------------------
;
;ACCUMULATORS
F=0 ;PROGRAM STATUS BITS
T1=1 ;SCRATCH
T2=T1+1
T3=T2+1
T4=T3+1
T5=T4+1
PT2=7 ;BYTE POINTER FOR KSYS MESSAGE
LASU=10 ;LAST SUBJOB USED
W=11 ;SUPER TEMP
MJOB=12 ;LOADED WITH JOBSTS ON CALL TO "ISJOB"
CMD=13 ;INPUT WORD
SJB=14 ;SUBJOB REFERENCE
PT1=15 ;BYTE POINTER
DATA=16 ;ASCII CHARACTER REGISTER
P=17 ;PUSHDOWN POINTER
;
;-----------------------------------------------------------------------
;
;ASCII CHARACTERS
CTRLA==1 ;^A
CTRLB==2 ;^B
CTRLC==3 ;^C
EOT==4 ;EOT (^D)
CTRLE==5 ;^E
BELL==7 ;BELL (^G)
TAB==11 ;HORIZONTAL TAB (^I)
LF==12 ;LINE FEED (^J)
VT==13 ;VERTICAL TAB (^K)
FF==14 ;FORM FEED (^L)
CR==15 ;CARRIAGE RETURN (^M)
CTRLO==17 ;^O
CTRLZ==32 ;^Z
ALT==33 ;STANDARD ALTMODE
SP==40 ;SPACE
DEL==177 ;DELETE
;
;-----------------------------------------------------------------------
;
;CHANNEL ASSIGNMENTS
DEFINE GETCHN(SYM)<
SYM==ZZ
ZZ==ZZ-1
>
ZZ==17
IFN FTAUTO,<GETCHN (AUTOC)> ; AND/OR ONE FOR THE AUTO FILE
IFN FTTLOG,<GETCHN (LOGC)> ; AND/OR ONE FOR THE LOG FILE
IFG HGHPTY-ZZ,<
PRINTX NOT ENOUGH IO CHANNELS
PRINTX REASSEMBLE WITH SMALLER VALUE OF "HGHPTY"
PASS2
END
>
;
;-----------------------------------------------------------------------
;
;SUBJOB STATUS BITS (STORED IN SJBFLG TABLE)
SHH==1B0 ;SILENCE PTY
; MUST BE SIGN BIT
DALSHH==1B1 ;SILENCE TILL JLOG&JB.UDI COME ON
ERONLY==1B2 ;ONLY PRINT ERROR LINES
TSIL==1B3 ;PUT EVERYTHING INTO DISK LOG
;
;-----------------------------------------------------------------------
;
;FLAG BITS (LH)
BRK==1B18 ;LAST CHARACTER INPUTTED FROM CONSOLE WAS
; A BREAK CHARACTER - INPUT LINE DONE
; MUST BE SIGN BIT
LCR==1B19 ;LAST CHAR FROM PTY WAS A CARRIAGE RETURN
HEADR==1B20 ;SET IF A HEADER HAS PEEN PUT ON A MESSAGE
MSG==1B21 ;SET WHEN SENDING TEXT TO SUBJOBS
CMD1==1B22 ;TEST UNIQUENESS OF COMMAND
AUXQ==1B23 ;ANOTHER BIT MEANING QUIET
REPL==1B24 ;LEADING STAR OR EXCLAM TYPED
PTBSY==1B25 ;SOME IO ACTION ON LAST PASS TO IOCHK
NOREP==1B26 ;MONITOR LIED ABOUT PTY HAVING OUTPUT READY
SBOD==1B27 ;SOMEONE RUNNING A JOB
QUIET==1B28 ;DO NOT SEND DATA TO TTY
FREETB==1B29 ;A FREE TAB WAS TYPED BY TABOUT
WASCOM==CMD1 ;LAST CALL TO SUBROUTINE WHATJB WAS TERMINATED
; BY A COMMA, INDICATING THERE ARE MORE
; REFERENCES LEFT
SLEEPR==1B30 ;FORCE SLEEP NOT HIBER
MSH==1B31 ;SET WITH MSGLEVEL
CCLST==1B32 ;CCL START
TIMO1==1B33 ;SOMEONE SITTING ON CONSOLE
;
;-----------------------------------------------------------------------
;
IFN FTAUTO,<AUTOM==1B34> ;AUTO MODE IN EFFECT
IFE FTAUTO,<AUTOM==0> ;ZERO IF AUTO CODE NOT ASSEMBLED
IFN FTTLOG,<OFILE==1B35> ;LOG FILE OPENED
IFE FTTLOG,<OFILE==0> ;ZERO IF LOG CODE NOT ASSEMBLED
RENBIT==777777-OFILE-MSH
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL PROGRAM STARTUP
;
;-----------------------------------------------------------------------
;
REEN: TLZ F,RENBIT ;ZERO VARIOUS BITS
JRST SETUP ;AND REJOIN REGULAR CODE
OPSER: TDZA F,F ;ZERO & SKIP
MOVSI F,CCLST ;LOAD CCLST,,0
RESET ;RESET THE WORLD
SETZB LASU,LOWBEG ;ZERO FIRST LOC OF STORAGE
MOVE T1,[LOWBEG,,LOWBEG+1] ;LOAD BLT XWD
BLT T1,LOWEND ;BLT ZEROES TO END
GETPPN T1, ;GET OUT PPN
JFCL ;SILLY SKIP
MOVEM T1,MYPPN ;SAVE FOR LATER USES
MOVE T1,[%LDFFA] ;FIND OUT OPR PPN
GETTAB T1, ;GET IT
MOVE T1,[1,,2] ;STANDARD DEFAULT
MOVEM T1,OPRPPN
SETZ T1, ;START WITH ZERO
MOVE T2,[%CNPTY] ;GET PTYOFS
GETTAB T2, ; FROM THE MONITOR
JRST LOOP50 ;DON'T KNOW
HLRZ T1,T2 ;COPY INDEX
MOVEM T1,PTY0LN ;STORE PTYOFS
SOJA T1,END50 ;STORE TCONLN
LOOP50: GETLCH T1 ;GET CHARACTERISTICS
TLNE T1,(1B1) ;SKIP IF NOT CTY
JRST END50 ;DONE
MOVEI T1,1(T1) ;INCR COUNT
JRST LOOP50 ;KEEP GOING
END50: HRRZM T1,TCONLN ;STORE
MOVEI T1,REEN ;LOAD RE-ENTRY ADDRESS
MOVEM T1,.JBREN ;STORE IN .JBDATA
MOVEI T1,WARNTB ;GET INITIAL KSYS POINTER
MOVEM T1,WARNTM ;STORE FOR LATER
MOVE P,[IOWD PDLSIZ,PDL] ;SET UP PDL
PUSHJ P,CHKOPR ;MAKE SURE ITS "OPR"
JRST SETUP ;SKIP KSYS
MOVE T1,[%NSKTM] ; GET THE TIME TO
GETTAB T1, ; :KSYS
SETZM T1 ;ZERO IF NONE
JUMPLE T1,SETUP ;JUMP IF :KSYS NOT SET
MOVEM T1,KSYNC ;STORE VALUE FOR TESTING
PUSHJ P,WARN ;WARN THE WORLD
SETUP: TLO F,BRK ;LAST CHAR A BREAK
MOVE P,[IOWD PDLSIZ,PDL] ;MAKE PUSHDOWN POINTER
PUSHJ P,JIFINI ;COMPUTE JIFFIES PER SECOND
PUSHJ P,INTINI ;SET UP FOR CONTROL C INTERCEPT
SETO T1, ;PUT -1 IN T1
WAKE T1, ;WAKE MYSELF
JFCL ;DON'T REALLY CARE
MOVSI T1,(HB.RIO!HB.RPT!HB.RTL) ;LOAD STANDARD HIBERNATE CODE
HIBER T1, ;STICK IN MONITOR
JFCL
IFN FTAUTO,<
TLZN F,CCLST ;SKIP IF CCL START
JRST MAIN ;NOT
MOVEI PT1,PACF ;POINT TO AUTO MESSAGES
PUSHJ P,MOUT ;STICK IN OUTPUT BUFFER
MOVSI T1,'SYS' ;LOAD INPUT DEVICE
GETLIN T2, ;LOAD TTY NAME
MOVE T3,[%CNOPR] ;GET THE NAME OF OPR
GETTAB T3, ; FROM THE MONITOR
JRST LOCAL ;SHOULD NEVER HAPPEN
CAMN T2,T3 ;ARE WE DEVOPR?
MOVSI T2,'OPR' ;YES--USE OPR.ATO
MOVE T3,T2 ;COPY TTY NAME
WHERE T3, ;GET OUR STATION NUMBER
JRST LOCAL ;DO NOT KNOW
MOVE T4,[SIXBIT /OPR0/] ;GET THE STATION NUMBER
WHERE T4, ; OF THE CENTRAL SITE
JRST LOCAL ;ONLY REMOTE STATIONS
CAMN T3,T4 ;ARE WE AT LOCAL STATION?
JRST LOCAL ;YES--USE OPR OR TTY
LSHC T3,-6 ;SHIFT I OCTIT INTO T4
LSH T3,3 ;SHIFT IN 3 ZEROS
LSHC T3,3 ;GENERATE SIXBIT
LSH T3,3
LSHC T3,3
ADDI T3,202020 ; ..
TRNN T3,570000 ;TRIM OFF LEADING ZEROS
LSH T3,6
TRNN T3,570000 ;LEADING ZERO
LSH T3,6 ;YES--TRIM IT OFF
HRLI T3,'OPR' ;PREFIX WITH OPR
MOVE T4,T3 ;COPY NAME OF OPR
DEVNAM T4, ;GET NAME OF OPR'S TTY
JRST LOCAL ;SO CLOSE
CAMN T2,T4 ;ARE WE OPRNN?
JRST [MOVE T2,T3 ;YES, USE OPRNN NOT TTY115
JRST LOCAL] ;AND GO FIND THE ATO FILE
MOVE T3,T2 ;COPY "TTYXXX"
GTNTN. T3, ;CONVERT TO NODE AND LINE NUMBERS
JRST LOCAL ;WHOOPS
MOVEI T4,2 ;DO THIS TWICE
ROT T3,^D9 ;GET RID OF HIGH BITS
MOVEI T5,3 ;DO THIS THRICE
LSH T2,3 ;MAKE SOME ROOM
LSHC T2,3 ;BRING IN A DIGIT
SOJG T5,.-2 ;FOR THREE DIGITS
SOJG T4,.-5 ;FOR BOTH HALVES
TDO T2,[SIXBIT/000000/] ;MAKE SIXBIT OUT OF IT
LOCAL: MOVSI T3,'ATO' ;LOAD EXTENSION
SETZ T4, ;NO PPN
PUSHJ P,FAUTO ;SETUP AUTO FILE
>
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL GENERAL PROGRAM LOOP
;
;-----------------------------------------------------------------------
;
MAIN: TLO F,BRK ;SET BIT(S) TO START
TLZ F,QUIET!MSG!AUXQ ;CLEAR BIT(S) TO START
SKPINL ;CLEAR ^O
JFCL ;DON'T CARE - JUST DO INPUT
PUSHJ P,STARTL ;START THE LINE
IFN FTAUTO,<
TLNN F,AUTOM ;SKIP IF IN AUTO MODE
JRST NO2 ;NOT
PUSHJ P,IOCHK ;CHECK PTY'S
TLNE F,PTBSY ;TEST FOR PTY ACTIVITY
JRST MAIN ;YES--LOOP AGAIN
PUSHJ P,STARTL ;MAY NEED NEW * OR !
JRST TTWAIT ;GO PROCESS COMMAND
>
NO2: SKPINC ;SKIP IF A CHAR IS AVAILABLE
JRST IOENDM ;NONE - GO SCAN PTY'S
SKPINL ;SKIP IF ENTIRE LINE TYPED
SKIPA ;SKIP
JRST TTWAIT ;THERE IS - GO READ IT
TLOE F,TIMO1 ;SET CHECK BIT & SKIP IF ZERO
JRST IOENDM ;TWICE ON - DON'T COUNTDOWN
MOVEI T1,TYPTIM ;WAIT N SECONDS TO FINISH LINE
TIMOLA: MOVEI T2,1 ;LOAD 1
SLEEP T2, ;SLEEP FOR A WHILE
SKPINC ;SOMETHING STILL THERE
JRST [PUSHJ P,CRLF ;ALIGN THE OUTPUT
TLZ F,REPL!TIMO1 ;CLEAR * OR ! GIVEN, TRY TIMOUT AGAIN
JRST MAIN] ;AND START AGAIN
SKPINL ;SKIP IF HE FINISHED THE LINE
SKIPA ;NO HE DIDN'T
JRST TTWAIT ;DONE - GO DIGEST
SOJG T1,TIMOLA ;COUNTDOWN
IOENDM: PUSHJ P,IOCHK ;GO CHECK PTY'S
TLNE F,PTBSY ;SKIP IF NO PTY ACTION
JRST MAIN ;SOME - GO LOOP
MOVSI T1,(HB.RIO!HB.RPT!HB.RTL) ;LOAD STANDARD HIBERNATE BITS
SKIPN KSYNC ;SKIP IF KSYS IS PENDING
SKIPE ATOTIM ;SKIP IF NO AUTO FILE PENDING
HRRI T1,^D50000 ;SET UP HIBER TIME FOR AUTO FILE AND/OR KSYS
MOVEI T2,SNOOZT ; AND ST SLEEP TIME
TLNN F,SLEEPR ;SLEEP?
HIBER T1, ;HIBERNATE
SLEEP T2, ;GO TO SLEEP....
PUSH P,LASU ;SAVE THE DEFAULTS
PUSH P,SJB ; ..
MOVE T1,[%NSKTM] ;GET TIME TO KSYS
SKIPE KSYNC ;SKIP IF NO KSYS COMMAND
GETTAB T1, ; FROM THE MONITOR
SETZ T1, ;NO GETTAB - LEAVE SYS ALONE
JUMPE T1,.+3 ;DO NOT WARN IF COUNTER IS 0
CAMG T1,@WARNTM ;TIME TO GIVE A WARNING?
PUSHJ P,WARN ;YES--GIVE THE WARNING
IFN FTAUTO,<
SKIPN ATOTIM ;ANY DEFERED FILES
JRST MPOP ;NO--LOOP BACK FOR MORE
PUSHJ P,GETUPT ;GET UPTIME IN MS.
CAMGE T1,ATOTIM ;TIME TO RUN AN AUTO FILE?
JRST MPOP ;NO--LOOK FOR WORK
TLNE F,AUTOM ;SEE IF AUTO FILE GOING
JRST AUTBSY ;YES--DELAY
MOVEI PT1,PACF ;SAY AUOT FILE
PUSHJ P,MOUT ; SO OPR WILL KNOW
MOVE T5,[ATOT1,,T1] ;SET UP BLT POINTER
BLT T5,T5 ;LOAD THE ACS
SETZM ATOTIM ;PREVENT A LOOP
PUSHJ P,FAUTO ;GIVE A FORCED AUTO
PUSHJ P,SETDA0 ;PUT NEXT ENTRY IN CLOCK
JRST MPOP ;LOOP FOR MORE
;HERE IF TIME OF DAY AUTO FILE WANTS TO HAPPEN WHILE PROCESSING
; ANOTHER AUTO FILE.
AUTBSY: MOVEI CMD,^D30*^D1000 ;SET A DELAY OF 30
PUSHJ P,SETDAE ; SECONDS AND RETRY
>
MPOP: POP P,SJB ;RESTORE DEFAULTS
POP P,LASU ; ..
JRST MAIN ;BACK TO WORK
JRST MAIN ;BACK TO WORK
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL COMMAND SCANNER
;
;-----------------------------------------------------------------------
;
TTWAIT: TLZ F,TIMO1 ;ACKNOWLEDGE RECEPTION
PUSHJ P,STTYIN ;GET FIRST CHAR OF LINE
JUMPL F,MAIN ;JUST <CR>
CAIN DATA,";" ;SKIP IF NOT COMMENT
JRST MAIN ;IGNORE LINE
CAIE DATA,":" ;SKIP IF COMMAND TO ME
JRST NOTME ;NOT - JUMP AROUND
PUSHJ P,COMDEC ;GO INTERPRET
JRST MAIN ;RECYCLE
JRST MAIN ;SAME
NOTME: CAIN DATA,"-" ;SKIP IF NOT DASH
JRST DEFAU1 ;IT IS - GIVE DEFAULT
CAIN DATA,"#" ;IS THIS A MONITOR JOB
JRST MONJOB ;YES--SEE WHICH ONE
PUSH P,DATA ;SAVE FIRST CHAR
PUSHJ P,SIXIN ;GET FIRST SIXBIT WORD
PUSHJ P,RESCA1 ; AND DO A RESCAN
CAIE DATA,"-" ;SKIP IF A DASH
JRST DEFAU2 ;NOT DASH - SEND ENTIRE LINE
POP P,DATA ;RESTORE CHARACTER
CAIN DATA,"B" ;SKIP IF NOT ASCII B
PUSHJ P,CHKBAT ;GO SEE IF BATCON LIVES
JRST NOT2 ;SKIP CODE
PUSH P,DATA ;SAVE CHARACTER
PUSHJ P,STTYIN ;GET FIRST "B"
PUSHJ P,DECIN ;SEE IF DEC NBR FOLLOWING
CAIN DATA,"-" ;SKIP IF NOT
JRST HAVNBR ;WAS IN BN- FORMAT
PUSHJ P,RESCA1 ;RESCAN
PUSHJ P,STTYIN ;SWALLOW THE "B"
PUSHJ P,SIXIN ;GET SIXBIT WORD
MOVS CMD,CMD ;SWAP HALVES
CAIE CMD,'ALL' ;SKIP IF "ALL" MNEMONIC
CAIN CMD,'AL ' ; OR THIS CONTRACTION OF
JRST HAVNBR ;GOT IT
CAIE CMD,'A ' ;LAST POSSIBLE
JRST SOMELS ;WILD GOOSE CHASE
HAVNBR: PUSHJ P,RESCA1 ;DO RESCAN
POP P,DATA ;CLEAR PDL
HRRZ LASU,SJB ;UPDATE LASU
JRST GOTNBR ;AND GO SEND LINE
SOMELS: PUSHJ P,RESCA1 ;DO RESCAN
POP P,DATA ;CLEAR STACK & FALL THROUGH
NOT2: CAIG DATA,"9" ;SKIP IF NON-NUMERIC
CAIGE DATA,"0" ;SKIP IF NUMERIC
JRST ALPHA1 ;BETTER BE ALPHABETIC
PUSHJ P,DECIN ;INPUT A DECIMAL NUMBER
CAIE DATA,"-" ;SKIP IF DASH IS DELIMITER
JRST MONJ.1 ;NO DASH
PUSHJ P,SJBLIM ;CHECK LIMITS
JRST MAIN ;BAD NUMBER - RESTART
JRST GOTNBR ;GO TO TRANSFER CODE
ALPHA1: PUSHJ P,SIXIN ;GET INPUT WORD
CAIE DATA,"-" ;DELIMITED BY A DASH
JRST MONJ.1 ;NOPE, IS NOT A SUBJOB SPEC
PUSHJ P,FINMNE ;GO FIND MNEMONIC
JRST MAIN ;RECYCLE ON ERROR
JRST GOTNBR ;GO PROCESS TEXT
MONJOB: PUSHJ P,DECIN ;GET THE NUMBER
CAIN DATA,"-" ;DELIMITED BY -
JRST FNDSJB ;YES--SET UP SJB.
MONJ.1: PUSHJ P,RESCA1 ;NO--SEND AS TEXT
JRST DEFAU1 ; TO LAST SUBJOB
FNDSJB: SETO T2, ;FLAG
MOVEI SJB,1B18 ;ALL SUBJOBS
PUSH P,[LOOKMJ] ;SUBROUTINE
PUSHJ P,RUNSUB ;RUN ONCE FOR EACH SUBJOB
JUMPL T2,ERR1 ;DO I KNOW HIM
MOVE SJB,T2 ;YES--LOAD SJB
JRST SKIP1 ;SEND THE LINE(S)
LOOKMJ: PUSHJ P,UJBSTS ;GET THE STATUS
CAIN CMD,(T1) ;SAME JOB NUMBER
HRRZ T2,SJB ;YES--COPY SUBJOB NUMBER
POPJ P, ;RETURN
DEFAU2: POP P,DATA ;RESTORE DATA
DEFAU1: HRRZ SJB,LASU ;LOAD WITH LAST REF
CAIE SJB,1000 ;IS NO CUR SUBJOB FLAG SET?
JRST GOTNBR ;NO
PUSHJ P,NOCUR ;YES,; GO MAKE AN ERROR MESSAGE
JRST MAIN ; AND RETURN
;
;-----------------------------------------------------------------------
;
SUBTTL SENDING TEXT TO SUBJOBS
;
;-----------------------------------------------------------------------
;
GOTNBR: TRNN SJB,1B18 ;SKIP IF "ALL" USED
JRST JUST1 ;SINGLE REFERENCE
PUSHJ P,CHKBAT ;SEE IF BATCON LIVES
JRST SKIP1A ;DOESN'T - SKIP CODE
MOVEI PT1,[ASCIZ/ALL-/] ;SEND ALL- TO BATCON
PUSHJ P,PTMOUT ;SEND STRING
SKIP1A: MOVNI SJB,1 ;RESTORE SJB
JRST SKIP1 ;AND SKIP THIS CODE
JUST1: TDNE F,USE(SJB) ;SKIP IF SUBJOB FREE
JRST SKIP1 ;INIT'ED - SKIP CODE
PUSHJ P,IPTY ;INITIALIZE A PTY
JRST MAIN ;NO MORE PTY'S
SKIP1: TLO F,MSG ;DO NOT FORMAT INPUT LINE
PUSHJ P,TTYIN ;GET NEXT CHAR
CAIN DATA,"-" ;DOUBLE DASH?
JRST MULN ;YES
TLOOP1: PUSH P,[PTYOUT] ;LOAD ADDR OF SUBROUTINE
PUSHJ P,RUNSUB ;GO EXEC IT
JUMPL F,FINONE ;EOL - FINISHED
PUSHJ P,TTYIN ;GET NEXT CHAR
JRST TLOOP1 ;CIRCLE
MULN: PUSHJ P,STTYIN ;GET NEXT CHAR ON LINE
JUMPL F,ERR1 ;NOT A BREAK CHAR, PLS
PUSH P,DATA ;SAVE ON PDL
TLOOP2: PUSHJ P,TTYIN ;GET NEXT CHAR
CAMN DATA,(P) ;MATCH?
JRST END2 ;YES - EXIT FROM LOOP
PUSH P,[PTYOUT] ;PUSH ADDR OF ROUTINE
PUSHJ P,RUNSUB ;GO EXEC IT
JRST TLOOP2 ;CIRCLE
END2: POP P,(P) ;RESTORE PDL
FINONE: PUSH P,[DUMPT] ;PUT ADDR ON STACK
PUSHJ P,RUNSUB ;GO EXEC IT
JRST MAIN ;CIRCLE
ERR1: PUSHJ P,CMDERR ;GO TYPE ERROR MESSAGE
JRST MAIN ;AND RESTART
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL COMMAND DECODER AND DISPATCHER
;
;-----------------------------------------------------------------------
;
COMDEC: PUSHJ P,SIXIN ;GO GET INPUT WORD
YES4: TLZ F,CMD1 ;ZERO THIS BIT TO START
MOVE T1,CMD ;LOAD INPUT WORD
SETO T2, ;FILL WITH ONES
LOOP4: LSH T2,-6 ;SHIFT RIGHT 6
LSH T1,6 ;SHIFT LEFT 6
JUMPN T1,LOOP4 ;JUMP IF MORE
MOVSI T1,-LSTSIZ ;MAKE AOBJN XWD
LOOP4A: CAMN CMD,COMLST(T1) ;SKIP IF NO MATCH
JRST FOUND ;PERFECT MATCH!
MOVE T3,COMLST(T1) ;LOAD IT UP
TDZ T3,T2 ;MASK OUT UNUSED BITS
CAME CMD,T3 ;SKIP IF IT NOW MATCHES
JRST NO4 ;NOPE
TLOE F,CMD1 ;SET AND SKIP IF FIRST TIME
JRST DUPLIC ;DUPLICATE COMMAND
HRRZ T4,T1 ;REMEMBER INDEX HERE
NO4: AOBJN T1,LOOP4A ;SEARCH THROUGH TABLE
TLNN F,CMD1 ;SKIP IF SOME MATCH
JRST CMDERR ;TYPE ERROR MESSAGE
MOVE T1,T4 ;LOAD UP INDEX
FOUND: TLZ T1,-1 ;ZERO LH
ROT T1,-1 ;DIVIDE BY 2 AND SAVE REMAINDER
MOVE T2,DSPTBL(T1) ;LOAD XWD DISPATCH ADDR
JUMPL T1,(T2) ;GO DISPATCH
MOVS T2,T2 ;SWAP HALVES
JRST (T2) ;GO EXEC
PANIC: CAMN CMD,[SIXBIT/MONITO/] ; ":MONITO" MUST BE TYPED COMPLETELY
JRST PANIC1 ;IT WAS, DO EMERGENCY EXIT
DUPLIC: JSP PT1,MOUT
ASCIZ /?OPRCNU Command not unique
/
;-----------------------------------------------------------------------
; Command Dispatch Table (alphabeticaly)
;-----------------------------------------------------------------------
;
DEFINE NAMES<
IFN FTAUTO,<
X AUTO,AUTO ;AUTO FILE COMMAND
>
IFN FTTLOG,<
X CLOSE,CLOSED ;CLOSE LOG FILE
>
IFN FTAUTO,<
X CONTINUE,CONT ;CONTINUE AUTO FILE
>
X CURRENT,CURS ;TYPE CURRENT SUBJOB
X DAYTIME,RESCO1 ;DAYTIME COMMAND
X DEFINE,SJNAM ;DEFINE MNEMONICS
X DEVICE,DEVREQ ;GET A DEVICE
X ERROR,SETERR ;ONLY ERROR LINES
X EXIT,FINISH ;EXIT TO MONITOR
X FREE,FREENO ;NEXT FREE SUBJOB
X HELP,HELP ;BRIEF EXPLANATION OF OPSER
X JCONT,RESCO1 ;5S03 FORCED CONTINUE
X K,KILL ;LOGOUT SUBJOB
X KILL,KILL ;LOGOUT SUBJOB
X KJOB,KILL ;SAME AS KILL
X KSYS,KSYS ;STOP THE SYSTEM
X LOGIN,LOGIN ;RUN LOGIN
X MONITO,PANIC ;PANIC EXIT
X MSGLVL,SETLEV ;SET MESSAGE LENGTH
X QUEUE,RESCO1 ;RUN QUEUE CUSP
X RES,RESCO1 ;ABBREV. FOR RESOURCES
X RESOURCES,RESCO1 ;TYPE SYSTEM RESOURCES
X RESTRICT,DEVRST ;RESTRICT DEVICE
X REVIVE,PTON ;LISTEN TO IT AGAIN
X SCHED,RESCO1 ;SCHED COMMAND
X SEND,RESCO1 ;SEND TTY COMMAND
X SET,SETCMD ;SET COMMAND
X SILENCE,PTOFF ;SILENCE PTY SUBJOB
X SLOGIN,SLOGIN ;SILENT LOGIN (SETS DALSHH BIT)
X STOP,SETMON ;PUT IN MONITOR MODE
X SYSTAT,RESCO1 ;RUN SYSTAT CUSP
X TIME,RESCO1 ;TIME COMMAND
IFN FTTLOG,<
X TLOG,TLOG ;ENTER LOG FILE
>
X TSILENCE,TPTOFF ;SAME AS SILENCE BUT LEAVE LOG ON
X TTYTST,TTYTST ;TEST OUT CONSOLE
X UNRESTRICT,DEVURS ;UNRESTRICT DEVICE
X W,WHAT ;WHAT COMMAND (ABBREVIATION)
X WH,WHAT
X WHAT,WHAT ;WHAT COMMAND
X WHERE,RESCO1 ;WHERE COMMAND
>
DEFINE SNAMES<
X RUN,SETRN ;'SET RUN CPUN'
X LOGMAX,SETLOG ;'SET LOGMAX N'
X BATMAX,SETBMX ;'SET BATMAX N'
X BATMIN,SETBMN ;'SET BATMIN N'
>
DEFINE X(A,B)<
<SIXBIT/A/>
>
COMLST: NAMES
LSTSIZ==.-COMLST ;HOW MANY COMMANDS THERE ARE
SETLST: SNAMES
SETSIZ==.-SETLST
;XWD DISPATCH TABLE MACRO
DEFINE X(A,B)<
IFE ZZ&1,<
DEFINE XX(C)<
XWD B,C
>>
IFN ZZ&1,<
XX B
>
ZZ==ZZ+1
>
ZZ==0
DSPTBL: NAMES
IFN ZZ&1,<XX 0>
ZZ==0
SETDSP: SNAMES
IFN ZZ&1,<XX 0>
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :FREE - :TTYTST
;
;-----------------------------------------------------------------------
;
FREENO: PUSHJ P,FSUB ;GET NBR OF FIRST FREE SUB
POPJ P, ;THERE WEREN'T ANY
MOVEI PT1,[ASCIZ/First free = /]
PUSHJ P,MOUT ;TYPE MESSAGE
HRRZ T1,SJB ;LOAD NBR
PUSHJ P,DECOUT ;TYPE IN DECIMAL
JRST CRLF ;END WITH RETURN
TTYTST: PUSHJ P,LOUD ;TURN ON TTY
MOVEI DATA,40 ;START WITH OCTAL 40
PUSHJ P,TTYOUT ;TYPE CHAR
CAIGE DATA,77 ;TYPE UP TO 77
AOJA DATA,.-2 ;KEEP GOING
PUSHJ P,CRLF
MOVEI DATA,100 ;NOW START WITH OCTAL 100
PUSHJ P,TTYOUT ;TYPE CHAR
CAIGE DATA,137 ;GO UP TO OCTAL 137
AOJA DATA,.-2
PUSHJ P,CRLF
MOVEI DATA,140 ;NOW START WITH 140
PUSHJ P,TTYOUT ;TYPE THAT
CAIGE DATA,174 ;GO UP TO 174
AOJA DATA,.-2
MOVEI PT1,[BYTE(7)BELL,CR,LF] ;ASCIZ STRING
JRST MOUT ;TYPE ON CONSOLE
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :CURRENT - :MSGLEVEL
;
;-----------------------------------------------------------------------
;
CURS: PUSHJ P,LOUD ;TURN TTY BACK ON
HRRZ SJB,LASU
CAIN SJB,1000 ;IS NO CUR SUBJOB FLAG SET?
JRST NOCUR ;YES, DO AN ERROR
MOVEI PT1,[ASCIZ/Current subjob = /]
PUSHJ P,MOUT
HRRZ SJB,LASU
PUSHJ P,PUTNAM
JRST CRLF
SETLEV: JUMPL F,TOOFEW ;MUST HAVE ARGUMENT
PUSHJ P,DECIN ;GET A NUMBER
JUMPGE F,CMDERR ;NO MORE PLEASE
JUMPE CMD,SETOK0 ;ZERO IS ONE POSSIBILITY
CAIE CMD,1 ;ONE IS THHE OTHER
JRST CMDERR ;TELL HIM THAT
TLZA F,MSH ;SHORT MESSAGES
SETOK0: TLO F,MSH ;LONG ONES
POPJ P, ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :SILENCE - :REVIVE - :STOP - :KILL - :ERROR - :TSILENCE
;
;-----------------------------------------------------------------------
;
PTOFF: PUSH P,[PTSETB] ;PUSH ADDR OF ROUTINE
PUSHJ P,RUNSA ;GO EXEC
POPJ P, ;RETURN
PTSETB: MOVSI T1,(SHH) ;LOAD SILENCE BIT
IORM T1,SJBFLG(SJB) ;OR BIT IN
POPJ P, ;AND RETURN
PTON: PUSH P,[PTCLRB] ;PUSH ADDR OF ROUTINE
PUSHJ P,RUNSA ;GO EXEC
POPJ P, ;RETURN
PTCLRB: MOVSI T1,(SHH!ERONLY!TSIL) ;LOAD SILENCE BIT
ANDCAM T1,SJBFLG(SJB) ;CLEAR BIT FROM TABLE
POPJ P, ;AND RETURN
SETMON: PUSH P,[STOPJB] ;PUSH ADDR OF SUBR
PUSHJ P,RUNSA ;EXECUTE
POPJ P, ;RETURN
KILL: PUSH P,[RPTY] ;LOAD SUBR ADDR
PUSHJ P,RUNSA ;EXEC
POPJ P,
SETERR: PUSH P,[ERSET] ;PUSH ADDRESS OF SUBROUTINE
PUSHJ P,RUNSA ;RUN SUB FOR EACH ARG
POPJ P, ;RETURN
ERSET: MOVSI T1,(ERONLY) ;SAMBERG BIT
IORM T1,SJBFLG(SJB) ;TUNR IT ON
POPJ P, ;RETURN
TPTOFF: PUSH P,[PTSET2]
PUSHJ P,RUNSA
POPJ P,
PTSET2: MOVSI T1,(TSIL!SHH)
IORM T1,SJBFLG(SJB)
POPJ P,
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :SLOGIN & :LOGIN
;
;-----------------------------------------------------------------------
;
LOGIN: TDZA T1,T1 ;NO FLAGS TO SET
SLOGIN: MOVSI T1,(DALSHH) ;LOAD SPECIAL SILENCE BIT
PUSH P,T1 ;SAVE THE BIT
PUSHJ P,FSUB ;GO FIND A FREE SUBJOB
JRST XPOPJ ;NONE AVAILABLE
PUSHJ P,IPTY ;NOW GET A FREE PTY
JRST XPOPJ ;NONE THERE
POP P,T1 ;RESTORE SLOG FLAG
IORM T1,SJBFLG(SJB) ;IOR INTO SUBJOB STATUS FLAGS
JUMPL F,LOGIN3 ;END OF LINE, FALL INTO LOGIN
PUSHJ P,STTYIN ;GET THE NEXT CHARACTER
JUMPL F,LOGIN3 ;END OF LINE, FALL INTO LOGIN
PUSH P,DATA ;SAVE FIRST CHARACTER OF PPN
MOVEI PT1,[ASCIZ/LOGIN /] ;GET LOGIN STRING
PUSHJ P,PTMOUT ;OUTPUT IT
POP P,DATA ;RESTORE THE CHARACTER
PUSHJ P,SLOOP2 ;PPN REALLY THERE, SEND IT
JFCL ; RANDOM LOSSAGE
JRST LOGIN5 ;WAIT, CHECK FOR END OF LOGIN
LOGIN3: MOVEI PT1,[ASCIZ/LOGIN /] ;LOAD ADDR OF STRING
PUSHJ P,PTMOUT ;SEND TO SUBJOB
HLRZ T1,MYPPN ;PUT PROJECT INTO RH OF T1
PUSHJ P,PTOCT ;TYPE AT SUBJOB
MOVEI DATA,"/" ;LOAD A SLASH
PUSHJ P,PTYOUT ;SEND CHAR
HRRZ T1,MYPPN ;LOAD PROGRAMMER NUMBER
PUSHJ P,PTOCT ;TYPE THAT
MOVEI DATA,CR ;LOAD RETURN
PUSHJ P,PTYOUT ;SEND THAT
MOVEI DATA,LF ;FINALLY A LINE FEED
PUSHJ P,PTYOUT ;BREAK CHAR FOR LINE
LOGIN5: PUSHJ P,LOOP10 ;WAIT FOR END OF LOGIN
MOVEI PT1,[ASCIZ/?OPRJNL JOB DID NOT GET LOGGED IN
/]
TDNE F,USE(SJB) ;DID WE GIVE BACK THE PTY
TLNE T1,(JB.ULI) ;NO, IS JOB LOGGED IN ( BIT FLIPPED)
JRST MOUT ;DIDN'T MAKE IT FOR SOME REASON.
POPJ P, ;RETURN, JOB IS ALIVE AND WELL
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :SYSTAT - :RESOURCES - :QUEUE - :SEND - :JCONT
;
;-----------------------------------------------------------------------
;
RESCO1: PUSHJ P,RESCOM ;DO RESCOM LIKE COMMAND
POPJ P, ;NO BANANAS
LOOP10: PUSHJ P,GBUF ;GET REPLY
PUSHJ P,UJBSTS ;GET JOBSTS
SETCA T1,T1 ;COMPLEMENT T1
TLNE T1,(JB.UDI) ;SKIP IF TTY IS IN INPUT WAIT
JRST LOOP10 ;KEEP CIRCLING
TLNN T1,(JB.UML) ;IS THE JOB IN MONITOR MODE?
TLNN T1,(JB.ULI) ;YES, LOGGED IN?
POPJ P,0 ;EITHER THE JOB IS LOGGED IN
;OR IT IS NOT IN MONITOR MODE
;HENCE, TO DO RELEASE PTY
JRST RPTYN ;RELEASE PTY
RESCOM: PUSHJ P,FSUB ;GET FIRST FREE SUBJOB
POPJ P, ;FORGET IT
PUSHJ P,IPTY ;GET A PTY FOR IT
POPJ P, ;NONE
PUSHJ P,RESCA1 ;DO A RESCAN
SLOOP0: PUSHJ P,STTYIN ;SWALLOW THE COLON
SLOOP1: PUSHJ P,TTYIN ;GET NEXT CHAR
SLOOP2: PUSHJ P,PTYOUT ;SEND THE CHAR TO THE PTY
JUMPGE F,SLOOP1 ;JUMP IF MORE TO COME
AOS (P) ;GIVE SKIP RETURN
JRST DUMPT ;SEND BUFFER
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :SET
;
;-----------------------------------------------------------------------
;
;SET COMMAND, SCAN FOR ARGUMENTS WE ARE TO HANDLE, THEN IF NONE,
;GO TO 'RESCO1' TO PASS COMMAND ON TO MONITOR.
SETCMD: JUMPL F,TOOFEW ;GIVE ERROR IF THAT WAS ALL
PUSHJ P,SIXIN ;MUST BE SOME MORE TYPEIN
JUMPE CMD,TOOFEW ;MUST HAVE ANOTHER ARGUMENT
CAIE DATA,SP ;MUST BE TERMINATED BY A SPACE
JRST CMDERR ;NOT GOOD TYPEIN
TLZ F,CMD1 ;ZERO "FOUND A MATCH" BIT
MOVE T1,CMD ;GET ARGUMENT
SETO T2, ;SET T2 TO -1
SETCM1: LSH T2,-6 ;THEN MAKE A MASK
LSH T1,6 ; USING ONLY THE NUMBER OF
JUMPN T1,SETCM1 ; CHARACTERS TYPED IN
MOVSI T1,-SETSIZ ;MAKE AN AOBJN WORD
SETCM2: CAMN CMD,SETLST(T1) ;SKIP IF NOT PERFECT MATCH
JRST SETCM4 ;MATCH, GO SERVICE
MOVE T3,SETLST(T1) ;GET ENTRY ON TABLE
TDZ T3,T2 ;USE ONLY NUMBER OF CHARACTERS TYPED IN
CAME CMD,T3 ;PARTIAL MATCH?
JRST SETCM3 ;NO, TRY NEXT
TLOE F,CMD1 ;PARTIAL, ANY OTHERS?
JRST DUPLIC ;YES, TYPE ERROR MESSAGE
HRRZ T4,T1 ;REMEMBER INDEX OF PARTIAL MATCH
SETCM3: AOBJN T1,SETCM2 ;TRY NEXT ARGUMENT, IF ONE
TLNN F,CMD1 ;FOUND A UNIQUE PARTIAL MATCH?
JRST RESCO1 ;NO, PASS IT ON TO MONITOR
MOVE T1,T4 ;YES, GET INDEX
SETCM4: TLZ T1,-1 ;CLEAR LH OF T1
ROT T1,-1 ;DEVIDE BY TWO
MOVE T2,SETDSP(T1) ;GET DISPATCH ENTRY
JUMPL T1,(T2) ;DISPATCH IF INDEX WAS ODD
MOVS T2,T2 ;IF INDEX EVEN, DISPATCH ON LEFT HALF
JRST (T2) ;AND GO
;SET RUN, SET LOGMAX, SET BATMAX, SET BATMIN, ARE SIMULATED MONITOR
; SET COMMANDS IMPLEMENTED VIA APPROPRIATE PRIVILEDGED SETUUO'S.
SETRN: JUMPL F,TOOFEW ;NOT ENOUGH ARGUMENTS?
PUSHJ P,SIXIN ;GET NEXT ARGUMENT
JUMPE CMD,CMDERR ;NO NEXT ARGUMENT?
SETZ T1, ;CLEAR T1 IN CASE ONLY ONE ARGUMENT
JUMPL F,SETRN1 ;COULD BE LAST ARGUMENT
CAIE DATA,SP ;OR MAYBE ONE FOLLOWS
JRST CMDERR ;BUT NO SPACE LOSES
MOVE T1,CMD ;SAVE ARGUMENT
PUSHJ P,SIXIN ;AND GET ANOTHER
JUMPE CMD,CMDERR ;MUST BE ONE
JUMPGE F,CMDERR ;AND ONLY ONE
SETRN1: PUSHJ P,SETCK0 ;DECODE LAST ARGUMENT
JRST SETRN3 ;NOT A VALID CPU NAME
JUMPE T1,SETRN4 ;IF T1=0, COMMAND WAS "SET RUN CPXN"
CAME T1,[SIXBIT /NO/];WAS COMMAND "SET RUN NO CPXN"?
JRST SETRN2 ;NO, TRY "ONLY"
PUSHJ P,SETMSK ;SET UP A MASK OF CURRENTLY RUNNING CPU'S
ANDCM T1,T3 ;CLEAR OUT THIS CPU
JRST SETRN5 ;AND ISSUE SETUUO
SETRN2: CAME T1,[SIXBIT /ONLY/];WAS "SET RUN ONLY CPXN"?
JRST CMDERR ;NO, ERROR
MOVE T1,T3 ;YES, ONLY SET THIS ONE
JRST SETRN5
SETRN3: CAME CMD,[SIXBIT /ALL/];WAS COMMAND "SET RUN ALL"?
JRST CMDERR ;NO, ERROR
MOVEI T1,77 ;MASK TO RUN ALL POSSIBLE CPU'S
JRST SETRN5
SETRN4: PUSHJ P,SETMSK ;GET MASK FOR RUNNING CPU'S
IOR T1,T3 ;AND ADD THIS TO OTHERS
SETRN5: SKIPN T1 ;WILL ANY BE RUNNABLE?
JRST NORUN ;NO, PRINT ERROR MESSAGE
HRLI T1,.STCRN ;GET SETUUO FUNCTION
SETUUO T1, ;AND SET NEW SPECIFICATION
JRST NOPRIV ;NOT LOGGED IN AS 1,2
POPJ P, ;AND RETURN
;SUBROUTINE TO MAKE A MASK OF ALL RUNNING CPU'S IN AC T1. T3 RESPECTED.
SETMSK: SETZ T1, ;CLEAR REGISTER TO BUILD MASK
MOVEI T4,1 ;MASK FOR CPU0
MOVE T5,[-6,,RUNTBL] ;TABLE OF GETTAB ARGUMENTS
SETMS1: MOVE T2,(T5) ;GET AN ENTRY
GETTAB T2, ;GET RUNNABILITY WORD
TLO T2,400000 ;ERROR RETURN MEANS UNRUNNABLE
SKIPL T2 ;SKIP IF CPU NOT RUNNING
IOR T1,T4 ;IS RUNNING, LIGHT BIT
LSH T4,1 ;MOVE TO NEXT CPU POSITION
AOBJN T5,SETMS1 ;AND LOOK AT NEXT IF ANY
POPJ P, ;ALL THROUGH
;SUBROUTINE TO CHECK VALIDITY OF A PHYSICAL OR LOGICAL CPU NAME AND
;CREATE A BIT MASK TO BE USED FOR THE .STRUN SETUUO.
;CALL MOVE CMD,[CPU NAME]
; PUSHJ P,SETCK0
; ERROR RETURN ;NOT A VALID NAME
; NORMAL RETURN ;BIT MASK IN AC T3
;T1 RESPECTED
SETCK0: HLLZ T3,CMD ;GET LEFTMOST THREE CHARACTERS
CAMN T3,[SIXBIT /CPU/];LOGICAL NAME?
JRST SETCK2 ;YES, MAKE MASK
MOVE T3,[-6,,PHYTBL] ;AOBJN WORD TO LIST OF GETTAB ARGUMENTS
SETCK1: MOVE T2,(T3) ;GET ARGUMENT
GETTAB T2, ;GET PHYSICAL NAME OF THIS CPU
SETZ T2, ;NONE?
CAME T2,CMD ;THIS ONE?
AOBJN T3,SETCK1 ;NO, TRY NEXT IF ANY
JUMPGE T3,CPOPJ ;NOT A VALID NAME?
SETCK2: HRRZ T4,CMD ;GET CPU NUMBER
LSH T4,-14 ;RIGHT JUSTIFY IF
SUBI T4,20 ;AND REDUCE TO BINARY
CAIG T4,5 ;TOO LARGE A NUMBER?
SKIPGE T4 ;NO, TOO SMALL?
POPJ P, ;NOT A LEGAL CPU NUMBER.
MOVE T3,PHYTBL(T4) ;GETTAB ARGUMENT FOR THIS CPU
GETTAB T3, ;GET PHYSICAL CPU NAME
POPJ P, ;DOESN'T EXIST, ERROR
MOVEI T3,1 ;MASK FOR CPU0
SETCK3: SOJL T4,CPOPJ1 ;THIS CPU?
LSH T3,1 ;NO, TRY NEXT
JRST SETCK3
;TABLE OF GETTAB ARGUMENTS FOR CPU'S
PHYTBL: %CCPHY ;CPU0 DATA BLOCK CONSTANTS
%CCPHY +2 ; 1
%CCPHY +4 ; 2
%CCPHY +6 ; 3
%CCPHY +10 ; 4
RUNTBL: %CVRUN ;CPU0 DATA BLOCK VARIABLES
%CVRUN +2 ; 1
%CVRUN +4 ; 2
%CVRUN +6 ; 3
%CVRUN +10 ; 4
SETLOG: JUMPL F,CMDERR ;MUST HAVE AN ARGUMENT
PUSHJ P,DECIN ;GET DECIMAL ARGUMENT
JUMPGE F,CMDERR ;ANY MORE IS AN ERROR
HRLI CMD,.STLMX ;GET SETUUO FUNCTION
SETUUO CMD, ;AND SET IT UP
JRST SETBAD ;SOMETHING WRONG
POPJ P,
SETBMX: JUMPL F,CMDERR
PUSHJ P,DECIN
JUMPGE F,CMDERR
HRLI CMD,.STBMX
SETUUO CMD,
JRST SETBAD
POPJ P,
SETBMN: JUMPL F,CMDERR
PUSHJ P,DECIN
JUMPGE F,CMDERR
HRLI CMD,.STBMN
SETUUO CMD,
JRST SETBAD
POPJ P,
DEVRST: JUMPL F,TOOFEW ;NOT ENOUGH TEXT
PUSHJ P,SIXIN ;GET DEVICE NAME
JUMPE CMD,CMDERR ;NO DEVICE NAME?
DVRST. CMD, ;RESTRICT DEVICE
JRST DEVERR ;ERROR RETURN, EITHER NON-EX OR NO PRIVS
CAIE DATA," " ;A SPACE
CAIN DATA,":" ;WAS THE COLON PROVIDED
PUSHJ P,STTYIN ;YES, GET NEXT CHAR
CAIN DATA,"," ;SKIP IF MORE ARGS.
JRST DEVRST ;GET NEXT ARG.
POPJ P, ;GOOD RETURN
DEVURS: JUMPL F,TOOFEW ;NOT ENOUGH TEXT?
PUSHJ P,SIXIN ;GET DEVICE NAME
JUMPE CMD,CMDERR ;NO DEVICE NAME?
DVURS. CMD, ;UNRESTRICT DEVICE
JRST DEVERR ;ERROR
CAIE DATA," " ;A SPACE
CAIN DATA,":" ;WAS THE COLON PROVIDED
PUSHJ P,STTYIN ;YES, GET NEXT CHAR
CAIN DATA,"," ;SKIP IF MORE ARGS.
JRST DEVURS ;GET NEXT ARG.
POPJ P, ;GOOD RETURN
SETBAD: SKIPA T2,[CMDERR] ;IF PRIV THEN COMAND ERROR
DEVERR: MOVEI T2,NOBE ;IF PRIV THEN NO SUCH DEVICE
MOVE T1,MYPPN ;GET OUR PPN
CAMN T1,OPRPPN ;ARE WE OPR??
JRST (T2) ;YES, MUST BE TYPO
JRST NOPRIV ;LOOSE
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :EXIT COMMAND
;
;-----------------------------------------------------------------------
;
FINISH: TLZ F,SBOD ;START WITH ZERO
MOVSI SJB,NPTLTH ;MAKE XWD PTR
FINISL: TDNN F,USE(SJB) ;SKIP IF IN USE
JRST NOFIN1
PUSHJ P,ISJOB ;SKIP IF JNA IS ON
JRST NOFIN2 ;FREE
TLOE F,SBOD ;SET & SKIP IF FIRST TIME
JRST MULTI ;SECOND OR THIRD
MOVEI PT1,[ASCIZ/?OPRJRO Job(s) running on /]
PUSHJ P,MOUT ;SEND THAT STRING
SKIPA
MULTI: PUSHJ P,COMOUT ;TYPE A COMMA
PUSHJ P,PUTNAM ;AND THE SUBJOB NAME
JRST NOFIN1 ;AND END LOOP
NOFIN2: PUSHJ P,RPTYN ;RELEASE PTY
NOFIN1: AOBJN SJB,FINISL ;LOOP FOR ALL SUBJOBS
TLNN F,SBOD ;SKIP IF SOMEBODY RUNNING
JRST FINIX ;NO--LOOK FOR KSYS
JSP PT1,MOUT
ASCIZ /
?OPRJRO Type ":KILL ALL" to kill the subjobs
/
FINIX: MOVEI PT1,[ASCIZ /%OPRKPN KSYS PENDING
/]
SKIPE KSYNC ;SKIP IF NO KSYS
PUSHJ P,MOUT ;TYPE THE MESSAGE
PANIC1: EXIT 17, ;SAY DOT
POPJ P,0 ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :KSYS COMMAND AND SYSTEM KILLER
;
;-----------------------------------------------------------------------
;
KSYS: JUMPL F,KNONE ;JUMP IF NO ARGUMENT
PUSHJ P,STTYIN ;GET A CHAR
JUMPL F,KNONE ;JUMP IF ONLY ARGUMENTS WERE BLANKS
SETZ SJB, ; AND CLEAR SJB
CAIN DATA,"+" ;WAS IT +HHMM
JRST GETKTM ;YES--GO READ TIME
MSTIME SJB, ;WHAT TIME IS IT NOW
IDIVI SJB,^D1000*^D60 ;CONVET TO MINS
PUSHJ P,RDX60 ;GET THE TIME
POPJ P, ;ERROR
CAILE CMD,^D24*^D60 ;MORE THAN 24 HRS.
JRST BADTIM ;YES--BAD TIME
JRST SETK ;LOCK IT IN
KNONE: SETZB CMD,T1 ;CLEAR KSYS TIME
JRST SETK1 ;STORE THE TIME
GETKTM: PUSHJ P,RDX60W ;GET TIME TO KSYS
POPJ P, ;ERROR
SETK: SUB CMD,SJB ;SUBTRACT TIME NOW
SKIPGE CMD ;IS IT POSITIVE
ADDI CMD,^D60*^D24 ;NO--ADD A DAY
CAIL CMD,5 ;AT LEAST FIVE MIN.
JRST SETK1 ;YES--SKIP THE WARNING
MOVEI PT1,ATL5 ;LOAD A WARNING
PUSHJ P,MOUT ;GIVE THE MESSAGE
MOVEI CMD,5 ;NO--SLOW ERIC DOWN
SETK1: SETZM KSYFLG ;CLEAR THE KSYS MESSAGE FLAG
JUMPL F,SETK2 ;IF END OF LINE
PUSHJ P,STTYIN ;GET NEXT NON-BLANK CHAR
JUMPL F,SETK2 ;IF END OF LINE
CAIE DATA,42 ;IS CHAR A QUOTE
JRST SETK2 ; NOPE, NO MESSAGE
MOVE PT2,[POINT 7,KSYMSG]; YEP, START READING MESSAGE
KMES0: PUSHJ P,TTYIN ; GET NEXT CHAR
CAIE DATA,LF ; IS IT A CR
JRST KMES1 ; NOPE, SKIP CODE
MOVEI PT1,[ASCIZ/?OPRUTM Unterminated Message
/] ; YEP,SET UP ERROR MESSAGE
PUSHJ P,MOUT ; SEND IT OUT
POPJ P, ; RETURN
KMES1: CAIN DATA,42 ; IS CHAR END QUOTE?
JRST KMES2 ; YEP,SKIP CODE
IDPB DATA,PT2 ; NOPE,STORE CHR IN MSG
JRST KMES0 ; AND GET NEXT CHAR
KMES2: SETOM KSYFLG ; SET MESSAGE FLAG ON
SETZ DATA, ; MAKE A NULL
IDPB DATA,PT2 ; FINISH ASCIZ STRING
SETK2: PUSHJ P,CHKOPR ;MAKE SURE ITS "OPR"
JRST SETUER ;NOT-SKIP KSYS CODE
HRLI CMD,.STKSY ;SET UP FUNCTION
SETUUO CMD, ;SET KSYS
JRST SETUER ;ERROR RETURN
HRRZM CMD,KSYNC ;SAVE FOR SYNC
MOVEI T1,WARNTB ;GET POINTER TO TABLE
MOVEM T1,WARNTM ;STORE AS WARN POINTER
HRRZ T1,CMD ;COPY TIME TO KSYS
JUMPE T1,SETDA0 ;DO NOT WARN IF 0
JRST WARN ;PUT IN THE REQUEST
SETUER: JSP PT1,MOUT ;GIVE ERROR MESSAGE
ASCIZ /?OPRCST You can not stop timesharing
/
RADIX 10
WARNTB: EXP 480,240,120,60,30,15,8,4,2,1,0,-1
RADIX 8
EXP 400000000000 ;SOMETHING VERY SMALL
WARN: PUSH P,T1 ;SAVE T1 (MIN. TO KSYS)
PUSHJ P,FSUB ;FIND A FREE SUBJOB
JRST XPOPJ ;NONE CLEAR STACK AND RETURN
MOVEM SJB,KSYPTY ;SAVE THE NAME OF THE SUBJOB
PUSHJ P,IPTY ;GO INIT A PTY.
JRST XPOPJ ;NONE AROUND CLEAN UP AND RETURN
POP P,T4 ;RESTORE T4
AOS WARNTM ;POINT TO NEXT TIME
CAMG T4,@WARNTM ;ONLY GIVE ONE MESSAGE
JRST .-2 ; BUMP POINTER AGAIN
JUMPLE T4,EWORLD ;END THE WORLD
CAMLE T4,WARNTB ;TEST FOR TIME FOR FIRST MESSAGE
JRST SETDA0 ;NO--JUST SET THE TIME
MOVEI PT1,[ASCIZ /SEND ALL OPSER: Timesharing ends in /]
PUSHJ P,PTMOUT ;SEND THE STRING
PUSHJ P,DECPTY ;DECMAL OUTPUT TO PTY
MOVEI PT1,[ASCIZ / min.
/]
PUSHJ P,PTMOUT ;SEND THE STRING
PUSHJ P,DUMPT ;DUMP THE BUFFER
WARN0: MOVE PT2,KSYFLG ;GET THE KSYS MESSAGE FLAG
JUMPGE PT2,WARN2 ;JUMP IF NOT SET
SETZM KSYFLG ;CLEAR FOR NEXT TIME AND CONT
WARN1: MOVEI PT2,1 ;SLOW DOWN FOR A SECOND
SLEEP PT2, ; TAKE A NAP
PUSHJ P,UJBSTS ;GET PTY JOB STATS
TLNN T1,(JB.UDI) ;IS IT READY FOR MORE?
JRST WARN1 ; NO, GO CHECK AGAIN
MOVEI PT1,[ASCIZ /SEND ALL OPSER: /]
PUSHJ P,PTMOUT ;SEND THE STRING
MOVEI PT1,KSYMSG ;GET KSYS MESSAGE
PUSHJ P,PTMOUT ;AND SEND IT OUT
MOVEI PT1,[ASCIZ/
/] ;AND FOLLOW WITH A CR
PUSHJ P,PTMOUT ;SEND IT OUT
PUSHJ P,DUMPT ;DUMP THE BUFFER
WARN2: JRST SETDA0 ;SET UP TIME TRAP
DECPTY: IDIVI T4,12 ;DIVIDE BY 10
PUSH P,T5 ;SAVE REMAINDER
SKIPE T4 ;SKIP IF DONE
PUSHJ P,DECPTY ;LOOP FOR MORE
POP P,T1 ;RESTORE A DIGIT
MOVEI DATA,60(T1) ;COPY AND CONVERT
JRST PTYOUT ;LOOP FOR MORE
CHKOPR: GETLIN PT1, ;FIND THIS LINE'S NAME
MOVE T1,[%CNOPR]
GETTAB T1, ;FIND TTY NAME
MOVSI T1,'CTY'
CAMN T1,PT1 ;IS IT "OPR"?
AOS (P) ;YES-ABLE TO KSYS
POPJ P, ;NO-NO KSYS
;HERE TO KILL ALL THE USERS JOBS
EWORLD: MOVEI PT1,[ASCIZ /SEND ALL OPSER: TIMESHARING IS OVER!!
/]
SETOM LINO ; RESET LINO
PUSHJ P,PTMOUT ;SEND THE MESSAGE
PUSHJ P,DUMPT ;DUMP THE BUFER
SETZM KSYNC ;OVER, CLEAR PENDING
MOVE T4,[%CNSJN] ;FIND OUT HOW MANY JOBS IN THE SYSTEM
GETTAB T4, ;ASK THE MONITOR
MOVEI T4,^D128 ;NICE LOOKING DEFAULT
MOVEM T4,MAXJOB ; SAVE THE MAX # OF THE JOBS
MOVEI T4,-1(T4) ;DON'T COUNT THE NULL JOB, CLEAR LH
ELOOP: MOVEI T1,(T4) ;COPY JOB NUMBER
TRMNO. T1, ;GET TTY NUMBER
SKIPA ;LOST--SEE WHY
JRST ELOOP1 ;WON--GET TTY BITS
JUMPN T1,ETRMNO ;NEED THE UUO
ELOOP2: SKIPGE LINO ;ORIGINAL JOB?
JRST .+3 ;YES
SETOM LINO ;NO-RESET THE LINO
MOVE T4,JOBNO ;AND RESTORE THE JOB NUMBER
SOJG T4,ELOOP ;LOOK AT NEXT JOB
JRST KJOBS ;GO KILL DETACHED JOBS
ELOOP1: MOVSI T2,(T4) ;GET JOB NUMBER AGAIN
HRRI T2,.GTPPN ;TABLE JBTPPN
GETTAB T2, ;WHO IS THIS GUY
SETZ T2, ;COME ON!!
CAMN T2,OPRPPN ;[SYSTEM OPSERATOR]
JRST ELOOP2 ;YES, LEAVE ALONE, WOULDN'T KILL
; IT LATER ANYWAY SO WHY DETACH
MOVE T2,T1 ;COPY LINE NUMBER
GETLCH T2 ;GET TTY BITS
TLNE T2,(1B0) ;A PTY?
JRST DETSJB ;YES
TLNN T2,(1B3!1B6) ;SKIP IF DATASET OR REMOTE
JRST ELOOP2 ;LOOK AT NEXT JOB
ELOOP3: SKIPL LINO ;ORIGINAL JOB?
MOVE T1,LINO ;NO-GET THE ORIGINAL JOB'S LINE #
HRLZ T2,T1 ;COPY LINE NUMBER
TLZ T2,(1B1) ;CLEAR IO INDEX BIT
ATTACH T2, ;DETACH THE JOB
JFCL ;WE TRIED
JRST ELOOP2 ;LOOP FOR MORE JOBS
DETSJB: SKIPGE LINO ;ORIGINAL JOB?
PUSHJ P,SAVINF ;YES, SAVE IT'S LINE AND JOB #
MOVSI T2,(T4) ;GET THE JOB #
HRRI T2,.GTLIM ;FIND OUT THE JOB STATUS
GETTAB T2, ;ASK THE MONITOR
JRST ELOOP2 ;FAIL-GO ON TO NEXT JOB
TLNN T2,(1B10) ;IS IT A BATCH JOB?
CTLJOB T4, ;SEE IF THERE IS A CONTROLLING JOB
JRST ELOOP2 ;FAIL, GO ON TO NEXT JOB
JUMPL T4,ELOOP3 ;NO CONTROLLING JOB.DETACH IT
SOSGE ,JBCNT ;SEE IF IN A LOOP?
JRST ELOOP3 ;YES, GO DETACH IT
JRST ELOOP ;NO,CHECK CONTROLLING JOB
SAVINF: MOVEM T1,LINO ;SAVE LINE #
MOVEM T4,JOBNO ;SAVE JOB #
MOVE T2,MAXJOB ;GET MAX # OF JOBS
MOVEM T2,JBCNT ;SAVE IN IT
POPJ P, ;RETURN
ETRMNO: JSP PT1,MOUT ;TRMNO UUO FAILED
ASCIZ /?OPRTUF TRMNO. UUO FAILED -- KSYS ABORTED
/
;HERE TO MOP UP ALL DETACHED JOBS (EXCEPT DETACHED [1,2])
KJOBS: PUSHJ P,.+1 ;DO TWICE FOR GOOD MEASURE
MOVSI T1,.GTTTY ;SAVE FIRST PTY
MOVEM T1,SAVKJB ;FOR LATER USE
KJOBGO: PUSHJ P,IOCHK ;EAT ANY OUTPUT FROM SUBJOBS
MOVSI SJB,NPTLTH ;BUILD AN AOBJN POINTER
KJOB.0: TDNE F,USE(SJB) ;IS THIS JOB IN USE
PUSHJ P,ISJOB ;YES, IS THERE A JOB ATTACHED TO IT
JRST KJOB.1 ;FOUND A FREE ONE, USE IT FOR KSYS
AOBJN SJB,KJOB.0 ;KEEP LOOKING
MOVEI SJB,^D10 ;POSSIBLE RACE COMING UP
SLEEP SJB, ;SO TAKE A QUICK NAP
MOVE SJB,KSYPTY ;GET OUR FAVORITE PTY
KJOB.1: PUSHJ P,RPTYN ;RELEASE OLD PTY (MAY DETACH OLD JOB)
PUSHJ P,IPTY ;AND INIT A PTY ON IT
POPJ P, ;NO MORE PTY'S
PUSHJ P,PTSET2 ;SET :TSILENCE MODE
MOVEI T1,(SJB) ;GET THE CHAN
DEVNAM T1, ;GET THE FILE NAME
POPJ P, ;PRIOR TO 5.03
HRLZ T1,T1 ;COPY UNIT TO LEFT HALF
MOVE T2,[POINT 6,T1] ;SET A BYTE POINTER
SETZ T3, ;CLEAR RESULT
KSLP0: ILDB T4,T2 ;LOAD A DIGIT
JUMPE T4,KSYS1 ;DONE
LSH T3,3 ;MULT BY 8
ADDI T3,-20(T4) ;ADD IN NEXT DIGIT
JRST KSLP0 ;LOOP FOR MORE DIGITS
KSYS1: ADD T3,PTY0LN ;FIX FOR PTYOFS
PUSH P,T3 ;SAVE ON STACK
MOVE T1,SAVKJB ;RESET OF CURRENT JOB NUMBER
KSLP1: MOVS T2,T1 ;LH=JOB , RH=TTY TRANSLATE TABLE
GETTAB T2, ;GET DDB POINTER
JRST KSYS2 ;END OF TTY TRANSLATE TABLE
SKIPN T2 ;SKIP IF DDB
AOJA T1,KSLP1 ;ELSE LOOK AT NEXT JOB
MOVSI T3,(T1) ;GET JOB NUMBER
HRRI T3,.GTPPN ;GET THE PPN OF THE JOB
GETTAB T3, ;AND JBTPPN WORD
JRST KSYS2 ;SHOULD NEVER HAPPEN
CAMN T3,OPRPPN ;IS IT A DETACH OPER JOB
AOJA T1,KSLP1 ;YES, LEAVE IT ALONE
;DETACHED OPR JOBS ARE PROBABLY USEFUL AND DON'T WANT TO WIRE THE NAMES
; INTO OPSER SINCE NEW ONES ARE ADDED. "FILDAE" WAS ADDED IN 6.03.
;FALL ONTO NEXT PAGE FOR FINAL KILLING OF THE JOB
KSYS4: PUSHJ P,CHKATT ;SEE IF ATTACHED
SKIPA ;NO--GO KILL OFF
AOJA T1,KSLP1 ;YES--REAL USER
POP P,T2 ;RESTORE LINE NUMBER
HRLZ T2,T2 ;PUT IN LEFT HALF
HRR T2,T1 ;PUT JOB IN RH
AOJA T1,.+1 ;ADVANCE TO NEXT JOB BEFORE STORING
MOVEM T1,SAVKJB ;SAVE SUBJOB NUMBER
TLO T2,(1B0) ;COMMAND LEVEL
ATTACH T2, ;ATTACH
JRST KJOBGO ;WHOOPS!! START AGAIN
PUSHJ P,STOP.1 ;SEND A FEW ^C'S
JFCL
MOVEI PT1,[ASCIZ \KJOB KSYS.LOG=/W/B/VD:D
\]
MOVE T1,[%CNST2] ;[126]SEE IF ON GALAXY-10
GETTAB T1, ;[126]GET 2ND CONFIG TABLE WORD
SETZ T1, ;WHOOPS, NOT EVEN 6.02
TRNE T1,ST%GAL ;[127]IF BIT IS ZERO, NORMAL MPB
MOVEI PT1,[ASCIZ\KJOB/BATCH/NOMESSAGES
\]
PUSHJ P,PTMOUT ;PUMP THE MESSAGE OVER
JRST KJOBGO ;LOOP FOR MORE JOBS
KSYS2: POP P,T1 ;CLEAN UP PDL
POPJ P, ;RETURN
;CHECK TO SEE IF ATTACHED (ARGS T1=JOB # T2=ADDR. OF DDB)
; SKIP RETURNS IF ATTACHED
CHKATT: HRRZ T3,T1 ;COPY JOB NO.
TRMNO. T3, ;GET LINE NUMBER
JRST .+2 ;UUO FAILED
JRST CPOPJ1 ;HAS LINE # MUST BE
; ATTACHED
JUMPE T3,CPOPJ ;UUO WORKED
; ASSUME DETACHED
MOVEI T3,14(T2) ;OFFSET FROM START OF DDB TO LDB POINTER
;OLD MONITOR
PEEK T3, ;GO LOOK AT CORE
TRNE T3,-1 ;REAL LDB LINK
AOS (P) ;YES--WIN
POPJ P, ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :CONTINUE COMMAND
;
;-----------------------------------------------------------------------
;
IFN FTAUTO,<
CONT: MOVEI T1,AUTOC
DEVCHR T1,
JUMPE T1,CNTCON
TLO F,AUTOM
POPJ P,
>
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :HELP COMMAND
;
;-----------------------------------------------------------------------
;
HELP: JUMPGE F,RESCO1 ;IF ARGUMENT PASS TO MONITOR
PUSH P,SJB ;SAVE SUBJOB NUMBER
PUSH P,LASU ;SAVE LAST REFERENCE
PUSHJ P,FSUB ;FIND A FREE PTY
JRST HELP.E ;NONE--CAN NOT HELP YOU
PUSHJ P,IPTY ;INIT A PTY
JRST HELP.E ;OUT OF PTY'S
MOVEI PT1,[ASCIZ /HELP OPSER
/]
PUSHJ P,PTMOUT ;GIVE THE LINE TO THE PTY
PUSHJ P,DUMPT ;DO THE OUTPUT TO THE PTY
PUSHJ P,LOOP10 ;GET THE TEXT
HELP.E: POP P,LASU ;RESTORE DEFAULTS
POP P,SJB ; ..
POPJ P, ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :DEFINE COMMAND
;
;-----------------------------------------------------------------------
;
SJNAM: JUMPL F,TOOFEW ;MUST HAVE SOME ARGUMENTS
PUSHJ P,SIXIN ;GET SIXBIT WORD
JUMPE CMD,CMDERR ;NO NULLS ALLOWED
CAIE DATA,"=" ;MUST END WITH EQUALS
JRST CMDERR ;ERROR
CAMN CMD,[SIXBIT /ALL/] ;ALL?
JRST NOALL ;YES--COMMAND ERROR
LDB T1,[POINT 6,CMD,5] ;GET FIRST CHAR.
CAIL T1,'A' ;LESS THAN A
CAILE T1,'Z' ;GREATER THAN Z
JRST CMDERR ;YES--COMMAND ERROR
PUSH P,CMD ;SAVE ON PDL
PUSHJ P,WHATJB ;GET SUBJOB REF
JRST XPOPJ ;TYPO
POP P,CMD ;RESTORE CMD
TRNE SJB,1B18 ;CANNOT USE ALL HERE
JRST NOALL ;TELL HIM
TDNN F,USE(SJB) ;MUST BE IN USE
JRST NOTACT ;NOT IN USE
PUSHJ P,ONLY1 ;NO LIST ALLOWED
MOVSI T1,NPTLTH ;MAKE XWD PTR
CAME CMD,MNEMON(T1) ;SKIP IF DUPLICATE
AOBJN T1,.-1 ;LOOP FOR ENTIRE TABLE
JUMPGE T1,STORE ;NO MATCH - GO STORE
TLZ T1,-1 ;ZERO LH
CAIN T1,(SJB) ;SKIP IF NOT NEW ONE
POPJ P, ;RE-TYPE
SETZM MNEMON(T1) ;ZERO OLD LOC
MOVEM CMD,MNEMON(SJB) ;INSERT NEW ONE
PUSHJ P,DECOUT ;TYPE NUMBER
JSP PT1,MOUT ;AND THIS MESSAGE
ASCIZ / Was mnemonic's old value
/
STORE: MOVEM CMD,MNEMON(SJB) ;STORE IN TABLE
POPJ P, ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :WHAT COMMAND
;
;-----------------------------------------------------------------------
;
WHAT: PUSH P,[TSTAT] ;PUSH ADDR OF SUBR
PUSHJ P,RUNSA ;GO EXECUTE
IFN FTAUTO,<
TRNE SJB,1B18 ;DON'T TYPE IF NOT :WHAT ALL
SKIPN T3,ATOTIM ;SKIP IF AUTO FILE PENDING
>
POPJ P, ;ELSE RETURN
IFN FTAUTO,<
PUSHJ P,LOUD ;TURN ON TTY
MOVEI PT1,[ASCIZ /Next auto file is: /]
PUSHJ P,MOUT ;PRINT INTRO
MOVE T1,ATOT2 ;FILE NAME
PUSHJ P,SIXBP ;PRINT IT
MOVEI PT1,[ASCIZ / AT /] ;ADDI IN NOISE WORD
PUSHJ P,MOUT ;PRINT IT
PUSHJ P,GETUPT ;GET THE UP TIME
SUB T3,T1 ;GET THE DISTANCE AWAY
MSTIME T1, ;GET THE CURRENT TIME
ADD T1,T3 ;GET TIME OF DAY
IDIV T1,[DEC 24*60*60*1000] ;MAKE MOD 1 DAY
MOVE T1,T2 ;USE REMAINDER
PUSH P,[TTYOUT] ;OUTPUT TO TTYOUT
PUSHJ P,HAVTIM ;TYPE AS TIME
JRST CRLF ;GIVE A CRLF AND RETURN
>
TSTAT: PUSHJ P,LOUD ;TURN ON TTY
PUSHJ P,PUTNAM ;TYPE SUBJOB NAME
PUSHJ P,TABOUT ;AND A TAB
PUSHJ P,ISJOB ;SKIP WITH JNA ON - LOAD MJOB
JRST NOTLOG ;CANNOT DO WITH JNA OFF
HRRZ T1,MJOB ;LOAD JOB NUMBER
PUSHJ P,DECOUT ;TYPE IT
PUSHJ P,TABOUT ;FOLLOWED BY A TAB
HRLZ T4,MJOB ;LOAD JOB INTO LH
HRRI T4,.GTPPN ;SET FOR PPN
GETTAB T4, ;GET FROM MONITOR
SETZ T4, ;FUNNY ERROR RETURN
SETZM DGTCNT ;ZERO DIGIT COUNT
HLRZ T1,T4 ;PUT PROJ# IN T1
PUSHJ P,OCTOUT ;TYPE THAT
PUSHJ P,COMOUT ;TYPE A COMMA
HRRZ T1,T4 ;LOAD PROG# INTO T1
PUSHJ P,OCTOUT ;TYPE THAT
PUSHJ P,TABOUT ;SPACE OVER
MOVE T1,DGTCNT ;LOAD DIGIT COUNT
CAIGE T1,7 ;SKIP IF MORE THAN 7
PUSHJ P,TABOUT ;TYPE ANOTHER TAB
HRLZ T1,MJOB ;PUT JOB IN LH
HRRI T1,.GTPRG ;GET PROGRAM NAME
GETTAB T1, ;FROM MONITOR
MOVE T1,[SIXBIT/? ?????/] ;LOAD BONER RETURN
PUSHJ P,SIXBP ;PRINT THAT
PUSHJ P,TABOUT ;AND A TAB
HRLZ T2,MJOB ;PUT JOB IN LH
HRRI T2,.GTSTS ;GET JOB STATUS
GETTAB T2, ;FROM MONITOR
SETZ T2, ;TAKE 0 FOR DEFAULT
MOVEI T1,'^C' ;LOAD DEFAULT ^C
JUMPGE T2,GOTSTA ;JUMP IF RUN BIT OFF
LDB T3,[POINT 5,T2,14]
IDIVI T3,3
HRLZ T1,T3 ;PUT QUOTIENT IN LH
HRRI T1,.GTWSN ;SIXBIT JOB QUEUE CODES
GETTAB T1, ;FROM MONITOR
MOVE T1,CTBL(T3) ;LOAD LEVEL-C DEFAULTS
LDB T1,PTRS(T4) ;GET APPROPRIATE 2 CHARS
CAIE T1,'SL' ;IS JOB IN SLEEP QUEUE?
JRST GOTSTA ;NO--PRINT STATE
TRNN T2,1B18 ;(USED TO TELL HIBER FROM SLEEP)
;CLOCK REQUEST?
MOVEI T1,'HB' ;NO--JOB IS HIBERING
GOTSTA: ROT T1,-^D12 ;LEFT JUSTIFY
PUSHJ P,SIXBP ;TYPE SIXBIT
TLNN T2,2000 ;SKIP IF LOWSEG IS SWAPPED OUT
JRST NOLSWP ;NOT
PUSHJ P,SPOUT ;TYPE A SPACE
HRLZ T2,MJOB ;PUT JOB IN LH
HRRI T2,.GTSWP ;SET UP FOR SWAPPER DATA
GETTAB T2, ;ASK MONITOR FOR IT
SETZ T2, ;MYSTERIOUS NO
MOVSI T1,'SW ' ;DEFAULT SW
SKIPGE T2 ;SKIP IF NOT FRAGMENTED
MOVSI T1,'SF ' ;REPLACE SW WITH SF
PUSHJ P,SIXBP ;TYPE STATE
NOLSWP: PUSHJ P,TABOUT ;TAB OVER
HRRZ T1,MJOB ;LOAD JOB NBR INTO T1
RUNTIM T1, ;GET MILLISEC RUNTIME
PUSH P,[TTYOUT] ;SEND TO TTY
PUSHJ P,HAVTIM ;TYPE ON CONSOLE THE TIME
TLNN F,MSH ;LONG MODE?
JRST CRLF ;CONCLUDE WITH CR-LF
PUSHJ P,TABOUT ;PUT OUT A TAB
PUSHJ P,UJBSTS ;GET THE JOB STATUS
MOVE T2,[ASCII . .] ;SET UP A BLANK WORD
TLNE T1,(JB.ULI) ;LOGGED IN
TLC T2,(<"L"+" ">B6) ;YES--MAKE AN L
TLNE T1,(JB.UML) ;MONITOR MODE?
TLC T2,(<"M"+" ">B13) ;YES--MAKE AN M
TLNE T1,(JB.UDI) ;INPUT REQUEST?
TLC T2,15 ;YES--MAKE AN H
TLNE T1,(JB.UOA) ;OUTPUT READY
TRC T2,<"O"+" ">B27 ;YES--MAKE AN O
TLNE T1,(JB.UJC) ;IS THE PRIV BIT ON?
TRC T2,<"A"+" ">B34 ;YES MAKE AN A
TLNE T2,1 ;JB.UDI?
TRO T2,100000 ;CONVERT H TO I
MOVEI PT1,T2
SETZ T3, ;MAKE A NULL
PUSHJ P,MOUT ;PRINT
JRST CRLF ;END WITH CRLF
PTRS: POINT 12,T1,11
POINT 12,T1,23
POINT 12,T1,35
CTBL: SIXBIT .RNWSTS.
SIXBIT .STAUMQ.
SIXBIT .DADTDC.
SIXBIT .MTIOTT.
SIXBIT .SLNL^C.
SIXBIT .??????.
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :AUTO COMMAND
;
;-----------------------------------------------------------------------
;
IFN FTAUTO,<
AUTO: PUSHJ P,TIMEAF ;SEE IF TIME-OF-DAY FILE
POPJ P, ;IT WAS ALL DONE.
PUSHJ P,GETSPC ;GET FILSPEC
POPJ P, ;RETURN ON ERROR
FAUTO: SKIPN T1 ;SKIP IF DEVICE TYPEIN
MOVSI T1,'DSK' ;GIVE HIM DISK
MOVEM T1,BLK3+1 ;STORE IN OPEN BLOCK
DEVCHR T1, ;GET CHARACTERISTICS
JUMPE T1,NOBE ;JUMP IF NON-EXISTANT
TLNN T1,(DV.IN) ;SKIP IF INPUT DEVICE
JRST NOTIN ;NOT - FLAG HIM
MOVEI T1,AUTIB ;LOAD ADDR OF IBUF HDR
MOVEM T1,BLK3+2 ;STORE IN OPEN BLOCK
PUSHJ P,AUTREL ;RELEASE OLD CHANNEL, IF ANY
OPEN AUTOC,BLK3 ;OPEN NEW ONE
JRST NOINTX ;SOMEONE ELSE HAS DEVICE
TLO F,AUTOM ;SET AUTO BIT
PUSH P,.JBFF ;PUT .JBFF ON PDL
INBUF AUTOC,3 ;FILL TO 2K MARK IN LOWSEG
POP P,.JBFF ;RESTORE .JBFF
MOVE T1,BLK3+1 ;GET BACK DEVNAM
DEVCHR T1, ;GET CHARS
TLNN T1,(DV.DIR) ;SKIP IF IT HAS A DIRECTORY
POPJ P, ;NONE - RETURN NOW
SKIPN T1,T2 ;LOAD FILNAME INTO T1
MOVE T1,[SIXBIT/OPSER/] ;LOAD DEFAULT
SKIPE T2,T3 ;SKIP IF NO EXT TYPED
TRZA T2,T2 ;ZERO RH
MOVSI T2,'ATO' ;LOAD DEFAULT
SETZ T3, ;ZERO T3
LOOKUP AUTOC,T1 ;TRY TO LOOKUP FILE
JRST CNFND ;NO SOAP
POPJ P, ;OK - RETURN
CNFND: PUSHJ P,AUTREL ;RELEAS AUTO CHANNEL
MOVEI PT1,[ASCIZ/?OPRALF LOOKUP failure /]
PUSHJ P,MOUT ;TYPE REASON FOR FAILURE
HRRZ T1,T2 ;LOAD ERROR CODE INTO T1
PUSHJ P,OCTOUT ;TYPE ON CONSOLE
JRST CRLF ;SUFFIX WITH CR-LF
AUTREL: TLZ F,AUTOM ;ZERO BIT
RELEAS AUTOC, ;RELEASE CHANNEL
PUSH P,T1 ;SAVE T1
HLRZ T1,.JBSA ;GET ORIGINAL .JBFF
TRO T1,1777 ;ROUND TO NEAREST K
CORE T1, ;RESET LOWSEG CORE
JFCL ;WHY I DON'T KNOW
POP P,T1 ;RESTORE T1
POPJ P, ;RETURN
NOTIN: JSP PT1,MOUT
ASCIZ /?OPRANI Device cannot do input
/
;HERE TO DO TIME-OF-DAY AUTO FILES
TIMEAF: JUMPL F,CPOPJ1 ;RETURN IF EOL
PUSHJ P,SAVACS ;SAVE THE ACS
;;[123] TIMEAF+1 INSERT 1 LINE, SPR 10-31102, MRB, 29-MAY-81
CAIN DATA," " ;[123]DONT GET ANOTHER CHARACTER
;[123]UNLESS THE LAST ONE WAS A SPACE.
PUSHJ P,STTYIN ;GET NEXT NON-BLANK
CAIE DATA,"/" ;SWITCH?
JRST NOSWT ;NO--THEN NO SWITCH
JUMPL F,CPOPJ1 ;TRANSFER IF EOL
PUSHJ P,TTYIN ;GO GET A CHAR
CAIE DATA,"+" ;TIME FROM NOW?
JRST TIMABS ;NO ABSOLUTE TIME
PUSHJ P,TTYIN ;GET A CHAR
PUSHJ P,TIMEX ;GET THE TIME
POPJ P, ;SYNTAX ERROR
TIMSTR: MOVEI PT1,[ASCIZ/%OPRSPR superseding previous :AUTO request
/]
SKIPE ATOTIM ;ALREADY HAVE ONE
PUSHJ P,MOUT ;YES, OUTPUT THE MESSAGE
PUSHJ P,SETDAE ;POKE DAEMON
PUSHJ P,GETSPC ;GET THE FILSPEC
POPJ P, ;ERROR
MOVE CMD,[T1,,ATOT1] ;STORE THE AC'S BACK
BLT CMD,ATOT5 ; UNTIL I NEED THEM
POPJ P, ;RETURN
TIMABS: SETZM T5 ;CLEAR T5 FOR /HH:MM
CAIN DATA,076 ;WAS LAST CHAR A RIGHT ANGLE
AOJA T5,TIMAB1 ;YES--SET T5 PLUS AS FLAG
CAIN DATA,074 ;WAS IT A LEFT ANGLE
SETOM T5 ;YES--SET T5 MINUS AS FLAG
TIMAB1: SKIPE T5 ;STANDARD FORMAT?
PUSHJ P,TTYIN ;NO--EAT THE BRACKET
PUSHJ P,TIMEX ;GET THE TIME
POPJ P, ;SYNTAX ERROR
MSTIME T1, ;GET CURRENT TIME OF DAY
SUB CMD,T1 ;GET MS TO WAIT
JUMPGE CMD,TIMSTR ;GO STORE THE TIME AND
; SET UP TO RUN THE FILE
; IF TIME IS NOT YET PAST.
JUMPE T5,CPOPJ1 ;DO IT NOW IF NO < OR >
JUMPL T5,CPOPJ ;FLUSH IT IF RIGHT BRACKET
ADD CMD,[^D24*^D60*^D60*^D1000] ;ELSE ADD 24 HOURS
JRST TIMSTR ;GO STORE THE TIME
TIMEX: PUSHJ P,RDX60 ;GET TIME OF DAY
POPJ P, ;SYNATX ERROR
IMULI CMD,^D60000 ;CONVERT TO MS
JRST CPOPJ1 ;RETURN
NOSWT: MOVEM DATA,SAVCH ;STORE CHAR
JRST CPOPJ1 ;RETURN
SETDAE: PUSHJ P,GETUPT ;GET THE UPTIME
ADD T1,CMD ;TIME TO GET UP
MOVEM T1,ATOTIM ;TIME TO GET UP
JRST SETDA1 ;JUMP AROUND OTHER CODE
SETDA0: SKIPN CMD,ATOTIM ;GET :AUTO TIME & TEST
JRST SETDA1 ; ZERO -- LOOK AT KSYS
PUSHJ P,GETUPT ;GET CURRENT UPTIME
SUB CMD,T1 ;GET TIME TO GO
>
IFE FTAUTO,<
SETDA0: MOVEI CMD,0
>
SETDA1: MOVE T1,[%NSKTM] ;GET THE TIME
GETTAB T1, ; TO KSYS
SETZ T1, ;FROM THE MONITOR
SUB T1,@WARNTM ;FIX FOR WARNINGS
IMULI T1,^D60000 ;CONVERT TO SECONDS
JUMPLE T1,SETDA2 ;IGNORE :KSYS IF .LE. 0
SKIPLE CMD ;IGNORE :AUTO IF .LE. 0
CAMG T1,CMD ;DOES END COME FIRST?
MOVE CMD,T1 ;YES--SET THE SHORTER LIMIT
SETDA2: JUMPLE CMD,CPOPJ ;EXIT IF ZERO TIME LEFT
ADDI CMD,^D999 ;ELSE ROUND UP 1 SECOND
IDIVI CMD,^D1000 ;CONVERT TO SECONDS
MOVE T1,[2,,T2] ;2 WORDS IN T2 AND T3
MOVEI T2,.CLOCK ;FUNCTION
MOVE T3,CMD ;ARGUMENT
DAEMON T1, ;LINE UP FOR JD WAIT
JRST CHKDAE ;SEE WHAT WENT WRONG
POPJ P, ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :DEVICE COMMAND
;
;-----------------------------------------------------------------------
;
DEVREQ: JUMPL F,TOOFEW ;MUST BE SOME MORE TYPEIN
PUSHJ P,SIXIN ;GET DEVNAM
JUMPE CMD,CMDERR ;NO NULLS
CAIE DATA,":" ;MUST END IN COLON
JRST CMDERR ;BOO-BOO
MOVE T1,CMD ;STORE IN T1
PUSHJ P,SIXIN ;GET DEVLOG
CAIE DATA,":" ;MUST END IN COLON
JRST CMDERR ;TELL HIM OF ERROR
MOVE T2,CMD ;LOAD INTO T2
PUSHJ P,WHATJB ;WHAT SUBJOB GETS DEVICE
POPJ P, ;TYPO
TRNE SJB,1B18 ;SKIP IF NOT ALL
JRST NOALL ;TELL HIM JUST ONE
TDNN F,USE(SJB) ;SKIP IF IN USE
JRST NOTACT ;NOT ACTIVE
PUSHJ P,ONLY1 ;ACCEPT ONLY FIRST ARG
CHK20: SKIPN T3,T2 ;LOAD LOGICAL NAME
MOVE T3,T1 ;NO, TAKE PHYSICAL NAME
DEVCHR T3, ;GET CHARACTERISTICS
TRNE T3,DV.ASC ;SKIP IF ASSIGNED BY CONSOLE
JRST GOAHD3 ;IT IS - DO REASSIGN
PUSH P,F ;SAVE FLAGS
TLZ F,AUTOM!QUIET!AUXQ ;TURN OFF ALL SILENCE FLAGS
MOVEI PT1,[ASCIZ/Type "ASSIGN /]
PUSHJ P,MOUT ;STICK INTO OUTPUT BUFFER
PUSHJ P,SIXBP ;PRINT PHYSICAL NAME
JUMPE T2,FINLX ;JUMP IF NO LOGICAL NAME
PUSHJ P,COLOUT ;TYPE A COLON
EXCH T1,T2 ;PUT LOGICAL NAME IN T1
PUSHJ P,SIXBP ;TYPE THAT
EXCH T1,T2 ;RESTORE AC'S
FINLX: MOVEI PT1,[ASCIZ/<cr>CONTINUE<cr>"/]
PUSHJ P,MOUT ;FINISH OFF MESSAGE
POP P,F ;RESTORE FLAGS
EXIT 1, ;RETURN TO MONITOR
JRST CHK20 ;LOOP
GOAHD3: SKIPN T4,T2 ;PUT LOG NAME INTO T4
MOVE T4,T1 ;NO LOG NAME - USE PHYSICAL NAME
PUSHJ P,UJBSTS ;GET JOBSTS
HRRZ T3,T1 ;PUT JOB NUMBER INTO T3
REASSI T3, ;REASSIGN THE DEVICE
POPJ P, ;AND RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL :CLOSED - :TLOG
;
;-----------------------------------------------------------------------
;
IFN FTTLOG,<
CLOSED: TLZ F,OFILE ;ZERO FILE OPENED BIT
RELEAS LOGC, ;RELEASE LOG FILE
POPJ P, ;RETURN NOW
TLOG: PUSHJ P,CLOSED ;CLOSE LOG FILE
PUSHJ P,GETSPC ;GET FILSPEC
POPJ P, ;ERROR RETURN
SKIPN T1 ;SKIP IF DEVSPEC
MOVSI T1,'DSK' ;LOAD DEFAULT DISK
MOVEM T1,BLK3+1 ;STORE IN OPEN BLOCK
DEVCHR T1, ;GET CHARACTERISTICS
JUMPE T1,NOBE ;IF NULL, NO SUCH DEV
TLNN T1,(DV.OUT) ;SKIP IF CAN DO OUTPUT
JRST NOTOUT ;CANNOT DO
MOVEM T1,LOGFIL ;STORE IN CORE
MOVSI T1,LOGOB ;LOAD ADDR OF OUTPUT BUF IN LH
MOVEM T1,BLK3+2 ;STORE IN OPEN BLOCK
OPEN LOGC,BLK3 ;OPEN DEVICE
JRST NOINTX ;NOT AVAILABLE
MOVEI T1,LOGOBB ;LOAD ADDR OF BUFFERS
EXCH T1,.JBFF ;STICK IN .JBFF
OUTBUF LOGC,1 ;ALWAYS 1 BUFFER
MOVEM T1,.JBFF ;RESTORE .JBFF
SKIPN T1,T2 ;LOAD FILNAME IN T1
MOVE T1,[SIXBIT/OPSER/] ;THAT IS DEFAULT
MOVEM T1,LOGFIL+1 ;STORE IN CORE
SKIPE T2,T3 ;LOAD EXT INTO T2
TRZA T2,-1 ;ZERO RH
MOVSI T2,'LOG' ;DEFAULT IS LOG
MOVEM T2,LOGFIL+2 ;REMEMBER THAT TOO
MOVEM T4,LOGFIL+3 ;STORE PPN
PUSHJ P,UPDATE ;ACCESS FILE
POPJ P, ;FAILURE
TLO F,OFILE!QUIET ;ANNOUNCE OPENING WITH SILENCE
SETOM FRCLOG ;FORCE THIS STUFF OUT TO LOG
MOVEI PT1,[ BYTE(7)CR,FF,TAB,"O","P"
ASCIZ/SER TRANSACTION LOG
/]
PUSHJ P,MOUT
MOVE T3,[-5,,LOGNAM] ;POINTER TO GETTAB NUMBERS
HRRZI T2,.GTCNF ;SET UP TO GET SYSTEM NAME
TLOG1: MOVE T1,T2 ;GET ARGUMENT
GETTAB T1, ;GET WORD OF NAME
SETZ T1, ;ERROR RETURN = NULL
MOVEM T1,(T3) ;STORE IN BUFFER
ADD T2,[1,,0] ;NEXT WORD
AOBJN T3,TLOG1 ;AND LOOK AT NEXT, IF ANY
MOVEI PT1,LOGNAM ;GET POINTER TO BUFFER
PUSHJ P,MOUT ;AND OUTPUT IT
PUSHJ P,TABOUT ;OUTPUT A TAB
MOVE T1,[%CNDT0] ;POINTER TO FIRST WORD OF SYSDAT
GETTAB T1, ;GET WORD
SETZ T1, ;ERROR RETURN=NULL
MOVEM T1,LOGDAT ;PUT IN BUFFER
MOVE T1,[%CNDT1]
GETTAB T1,
SETZ T1,
MOVEM T1,LOGDAT+1 ;SECOND WORD OF DATE
MOVEI PT1,LOGDAT
PUSHJ P,MOUT
PUSHJ P,CRLF
PUSHJ P,CRLF
DATE T1, ;WHAT'S TODAYS DATE
IDIVI T1,^D31 ;GET DAY-1 IN T2
PUSH P,T1 ;SAVE QUOTIENT ON PDL
MOVEI T1,1(T2) ;LOAD DAY INTO T1
PUSHJ P,DECOUT ;TYPE IN DECIMAL
POP P,T1 ;RESTORE QUOT
IDIVI T1,^D12 ;LEAVE MONTH-1 IN T2
PUSH P,T1 ;SAVE QUOT AGAIN
MOVE T1,MONTAB(T2) ;GET SIXBIT TYPOUT
PUSHJ P,SIXBP ;SEND THAT
POP P,T1 ;GET YEAR BACK
ADDI T1,^D64 ;SUM TO TODAY'S YEAR MOD 100
PUSHJ P,DECOUT ;TYPE IN DECIMAL
PUSHJ P,TABOUT ;TAB OVER
PUSH P,[EXP DSKOUT] ;PUSH ADDR OF ROUTINE
PUSHJ P,TIMOUT ;SEND THE CURRENT TIME
MOVEI PT1,[ASCIZ/ Job /]
PUSHJ P,MOUT ;SEND THAT
PJOB T1, ;GET MY JOB NUMBER
PUSHJ P,DECOUT ;TYPE IN DECIMAL
MOVEI PT1,[ASCIZ/ [/]
PUSHJ P,MOUT ;TYPE THAT
HLRZ T1,MYPPN ;PUT PROJ IN T1
PUSHJ P,OCTOUT ;TYPE IN OCTAL
PUSHJ P,COMOUT ;AND A COMMA
HRRZ T1,MYPPN ;NOW GET PROGRAMMER NUMBER
PUSHJ P,OCTOUT ;TYPE IN OCTAL
MOVEI PT1,[ASCIZ/]
/]
PUSHJ P,MOUT ;LIST CRLF
SETZM FRCLOG ;CLEAR FLAG
POPJ P, ;AND RETURN
;
;-----------------------------------------------------------------------
;
;SUBR TO PERFORM LOOKUP,ENTER,USETO SEQUENCE TO APPEND TO FILE
UPDATE: MOVE T1,LOGFIL+1 ;RETRIEVE FILNAME
MOVE T2,LOGFIL+2 ;AND EXTENSION
SETZ T3, ;ZILCH THAT OUT
MOVE T4,LOGFIL+3 ;GET PPN
MOVEI T5,1 ;LOAD DEFAULT USETO BLK
LOOKUP LOGC,T1 ;TRY TO FIND FILE
JRST DENTER ;NOT THERE - DO ENTER
HLRE T3,T4 ;GET LENGTH IN T3
JUMPGE T3,GBLKN ;JUMP IF BLOCKS GIVEN
IDIV T3,[-<DSKSIZ-3>] ;COMPUTE NBR OF BLOCKS
SKIPE T4 ;SKIP IF NO REMAINDER
ADDI T3,1 ;WRITE AFTER PARTIALLY USED BLK
GBLKN: MOVEI T5,1(T3) ;LOAD LENGTH+1
DENTER: MOVE T1,LOGFIL+1 ;RELOAD FILNAME
MOVE T2,LOGFIL+2 ;AND EXTENSION
SETZ T3, ;ZERO OUT THAT
MOVE T4,LOGFIL+3 ;RELOAD PPN
ENTER LOGC,T1 ;ENTER FILE
JRST NOENT ;CANNOT DO
OUTPUT LOGC, ;DO DUMMY LOGOUT
USETO LOGC,(T5) ;SELECT BLOCK
JRST CPOPJ1 ;GIVE SKIP RETURN
NOENT: PUSHJ P,CLOSED ;FINISH OFF OLD ONE
MOVEI PT1,[ASCIZ/?OPRLEF ENTER failure /]
PUSHJ P,MOUT ;TYPE THAT
PUSHJ P,LOUD ;TURN ON THE OPERATOR
HRRZ T1,T2 ;LOAD ERROR CODE INTO T1
PUSHJ P,OCTOUT ;AND TYPE IN OCTAL
JSP PT1,MOUT ;END WITH THIS MESSAGE
ASCIZ / on LOG file
/
DSKOUT: TLNN F,OFILE ;SKIP IF FILE OPENED
POPJ P, ;IGNORE CHAR
SOSLE LOGOB+2 ;SKIP IF BUFFER FULL
JRST PUTB9 ;MORE ROOM
PUSHJ P,SAVACS ;SAVE REGISTERS
CLOSE LOGC, ;CLOSE FILE - RETAIN CHANNEL
PUSHJ P,UPDATE ;RE-OPEN FILE
POPJ P, ;UNSUCCESSFUL
PUTB9: IDPB DATA,LOGOB+1 ;STORE IN BUFFER
POPJ P, ;RETURN
NOTOUT: JSP PT1,MOUT ;TYPE MESSAGE
ASCIZ /?OPRDCO Device cannot do output
/
MONTAB: SIXBIT /-JAN-/
SIXBIT /-FEB-/
SIXBIT /-MAR-/
SIXBIT /-APR-/
SIXBIT /-MAY-/
SIXBIT /-JUN-/
SIXBIT /-JUL-/
SIXBIT /-AUG-/
SIXBIT /-SEP-/
SIXBIT /-OCT-/
SIXBIT /-NOV-/
SIXBIT /-DEC-/
>
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL SUBROUTINE TO GET A FILSPEC
;CALLED BY PUSHJ P,GETSPC
; ERROR
; NORMAL
;
;ON SUCCESSFUL RETURN, REGISTERS T1 THRU T4 ARE LOADED AS FOLLOWS:
; T1 = DEVICE SPEC
; T2 = FILE NAME
; T3 = EXTENSION
; T4 = PPN
;IF NO TYPEIN WAS GIVEN FOR A CATEGORY, 0 IS RETURNED IN THE REGISTER
IFN FTTLOG!FTAUTO,<
GETSPC: SETZB T1,T2 ;ZERO OUT ALL TO START
SETZB T3,T4
JUMPL F,CPOPJ1 ;RETURN NOW IF DONE
PUSHJ P,SIXIN ;GET SIXBIT WORD
CAIE DATA,":" ;SKIP IF DEVICE SPEC
JRST NOTDEV ;I GUESS NOT
MOVE T1,CMD ;STICK IN APPROPRIATE AC
PUSHJ P,SIXIN ;GET NEXT WORD
NOTDEV: MOVE T2,CMD ;LOAD FILNAME
JUMPL F,CPOPJ1 ;RETURN IF DONE
CAIE DATA,"." ;SKIP IF EXTENSION
JRST MBPPN ;NOPE - MAYBE A PPN
PUSHJ P,SIXIN ;LOAD THAT
HLLO T3,CMD ;LOAD EXT INTO AC
JUMPL F,CPOPJ1 ;RETURN IF LINE DONE
MBPPN: CAIE DATA,"[" ;SKIP IF START OF PPN
JRST BADFIL ;BAD FILSPEC
PUSHJ P,OCTIN ;GET FIRST NUMBER
CAIN DATA,"," ;MUST END WITH COMMA
TLNE CMD,-1 ;AND BE LESS THAN 777777
JRST BADFIL ;IT WASN'T
HRLZ T4,CMD ;STICK IN LH OF T4
PUSHJ P,OCTIN ;GET PROGRAMMER NUMBER
CAIN DATA,"]" ;CHECK FOR CLOSE BRACKET
TLNE CMD,-1 ;AND LT 777777
JRST BADFIL ;TYPO
HRRI T4,(CMD) ;LOAD INTO RH OF T4
PUSHJ P,STTYIN ;GET NEXT NON-BLANK CHAR
JUMPL F,CPOPJ1 ;IF BREAK CHAR, A.O.K.
BADFIL: JSP PT1,MOUT ;TYPE ANNOYING MESSAGE
ASCIZ /?OPRBFS Bad file spec
/
>
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL SUBROUTINES
;
;-----------------------------------------------------------------------
;
;CALLED BY PUSH P,[ADDR]
; PUSHJ P,RUNSUB
; ALWAYS RETURN
;
; RUNSUB WILL CALL THE SUBROUTINE AT ADDR, AND WILL PERFORM ALL
;MANIPULATIONS OF REGISTER SJB INCLUDING ACTIVITY CHECKS AND
;ALL EXPANSIONS. IT ENDS BY POPPING THE RETURN PC ONTO THE
;PUSHED ARGUMENT AND POPJ'ING, SO THE CALLER SHOULD NOT DO A
;POP UPON RETURN TO CLEAR THE STACK
RUNSUB: TRNN SJB,1B18 ;SKIP IF ALL
JRST RUNONE ;NOT ALL - JUST ONE ARG
MOVSI SJB,NPTLTH ;MAKE AOBJN WORD
RUNSU0: TDNE F,USE(SJB) ;SKIP IF THIS ONE'S FREE
PUSHJ P,@-1(P) ;PUSHJ TO SUBROUTINE
JFCL ;IGNORE ERRORS
AOBJN SJB,RUNSU0 ;LOOP FOR ALL
MOVNI SJB,1 ;MAKE ALL AGAIN
JRST APOPJ ;CLEAR PDL & RETURN
RUNONE: TDNN F,USE(SJB) ;SKIP IF IN USE
JRST RUNER1 ;NOT - ERROR
PUSHJ P,@-1(P) ;CALL SUBROUTINE
JFCL ;DON'T CARE ABOUT ERRORS
JRST APOPJ ;CLEAR STACK & POPJ
RUNER1: POP P,-1(P)
JRST NOTACT
;
;-----------------------------------------------------------------------
;
;CALLED BY PUSH P,[ADDR]
; PUSHJ P,RUNSA
; ALWAYS RETURN
;
; RUNSA INTERPRETS SUBJOB LISTS IN COMMANDS AND CALLS SERIALLY
;THE SUBRROUTINE AT ADDR. RUNSA ALSO CLEARS THE STACK OF THE
;PUSHED ARG BEFORE RETURNING.
RUNSA: PUSHJ P,WHATJB ;WHAT SUBJOB REF?
JRST APOPJ ;CLEAR STACK AND RETURN
PUSH P,-1(P) ;PUT ADDR ON TOP OF STACK
PUSHJ P,RUNSUB ;AND CALL RUNSUB
TLNE F,WASCOM ;WAS LAST DELIMITER A COMMA
JRST RUNSA ;YES, GO GET NEXT ARG
JRST APOPJ ;NO, RETURN NOW
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI SJB,NNN
; PUSHJ P,CSTOP
; HERE IF STOPPED IN ^C
; HERE IF NOT
CSTOP: PUSHJ P,UJBSTS ;GET JOBSTS
SETCA T1,T1 ;COMPLEMENT RESULT
TLNE T1,(JB.UML!JB.UDI) ;SKIP IF BOTH WERE ON
AOS (P) ;NOT - INCR RETURN PC
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;SUBROUTINE TO START A LINE
STARTL: TLNE F,REPL!AUTOM ;SKIP IF WE MUST
POPJ P,
MOVEI DATA,"*"
MOVSI SJB,NPTLTH ;LOAD AOBJN WORD
STAR1: TDNN F,USE(SJB) ;SKIP IF IN USE
JRST ESTAR1 ;NOT
PUSHJ P,UJBSTS ;GET JOBSTS
TLNN T1,(JB.UDI) ;SKIP IF IN INPUT WAIT
SKIPA DATA,["!"] ;LOAD THAT CHAR
ESTAR1: AOBJN SJB,STAR1 ;LOOP FOR ALL
PUSHJ P,TTYOUT ;TYPE IT
TLO F,REPL ;REMEMBER I DID
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;CALLED BY PUSHJ P,FSUB
; NO FREE SUBJOBS
; HERE WITH NBR OF FREE SJB IN AC-SJB
FSUB: MOVSI SJB,NPTLTH ;MAKE AOBJN XWD
FLOOP1: TDNE F,USE(SJB) ;SKIP IF FREE
AOBJN SJB,FLOOP1 ;LOOP FOR ALL
JUMPGE SJB,NOFREE ;JUMP IF ALL IN USE
HRRZ LASU,SJB ;LOAD AS DEFAULT
JRST CPOPJ1 ;SKIP BACK
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI CMD,NNNNN
; PUSHJ P,SJBLIM
; HERE IF C(CMD) IS NOT A VALID SJB NBR
; HERE IF OK, WITH SJB LOADED UP FROM CMD
SJBLIM: JUMPL CMD,OUTBND ;NO NEGATIVE SJB
CAILE CMD,HGHPTY ;SKIP IF UNDER LIMIT
JRST OUTBND ;NOT - PRINT ERROR MESSAGE
MOVEI SJB,(CMD) ;LOAD UP SJB
MOVEI LASU,(SJB) ;UPDATE LAST USED
JRST CPOPJ1 ;SKIP BACK
;
;-----------------------------------------------------------------------
;
;CALLED BY PUSHJ P,CHKBAT
; HERE IF NO BATCON AT USER LEVEL
; HERE IF OPSER IS RUNNING ONE
CHKBAT: MOVSI T1,'B ' ;LOAD NECESSARY MNEMONIC
MOVSI SJB,NPTLTH ;MAKE XWD
CAME T1,MNEMON(SJB) ;SKIP IF MATCH
AOBJN SJB,.-1 ;LOOP FOR ALL
JUMPGE SJB,CPOPJ ;RETURN IF NO MATCH
PUSHJ P,UJBSTS ;GET JOBSTS
TLNE T1,(JB.UML) ;SKIP IF NOT IN MONITOR MODE
POPJ P, ;NOPE
MOVS T1,T1 ;PUT JOB NUMBER IN LH
HRRI T1,.GTPRG ;AND PROGRAM NAME INDEX IN RH
GETTAB T1, ;GET FROM MONITOR TABLE
POPJ P, ;STRANGE ERROR
CAMN T1,[SIXBIT/BATCON/] ;ACCEPTED NAME FOR BATCH
AOS (P) ;GIVE SKIP RETURN
POPJ P, ;GO BACK TO CALLER
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVE CMD,[SIXBIT/WORD/]
; PUSHJ P,FINMNE
; HERE IF WORD IS NOT IN MNEMONIC TABLE
; HERE IF IT IS, WITH SJB LOADED
;
;IF C(CMD)=SIXBIT/ALL/, THE SKIP RETURN IS GIVEN WITH C(SJB)=-1
FINMNE: JUMPE CMD,NOMNE ;NO NULLS
CAMN CMD,[SIXBIT/ALL/] ;SKIP IF NOT ALL
JRST SETALL ;IT IS - SET REGISTERS
MOVSI SJB,NPTLTH ;MAKE XWD POINTER
CAME CMD,MNEMON(SJB) ;SKIP IF MATCH
AOBJN SJB,.-1 ;LOOP FOR ALL
JUMPGE SJB,NOMNE ;JUMP IF NO MATCH AT ALL
MOVEI LASU,(SJB) ;UPDATE LAST USED
JRST CPOPJ1 ;JUMP BACK WITH SKIP
SETALL: MOVNI SJB,1 ;PUT -1 IN SJB
TRNN F,-1 ;SKIP IF ANY ARE IN USE
JRST ALLFR ;ALL FREE - TELL HIM
JRST CPOPJ1 ;SKIP BACK
;
;-----------------------------------------------------------------------
;
;CHECKING SUBJOBS FOR OUTPUT
IOCHK: TLZ F,PTBSY ;ZERO BIT TO START
MOVSI SJB,NPTLTH ;LOAD AOBJN XWD
IOCHK0: TDNN F,USE(SJB) ;SKIP IF IN USE
JRST ENDIO0 ;NOT
PUSHJ P,UJBSTS ;GET JOBSTS
TLNE T1,(JB.UOA) ;SKIP IF OUTPUT IS NOT READY
JRST ENDI.1 ;IS SOME, TAKE IT
TLNN T1,(JB.UDI) ;JOB IN TI STATE
JRST ENDIO0 ;NO, CAN'T BE GONE YET
JRST ENDIO1 ;YES, SEE IF IT STILL EXISTS
ENDI.1: TLO F,PTBSY ;SET FIND BIT
PUSHJ P,GBUF ;GO GET BUFFER(S)
ENDIO1: PUSHJ P,ISJOB ;SKIP IF JNA STILL SET
PUSHJ P,RPTYN ;GO RELEAS
ENDIO0: AOBJN SJB,IOCHK0 ;LOOP
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI SJB,NNN
; PUSHJ P,UJBSTS
; ALWAYS RETURN
;
;REGISTER T1 IS LOADED WITH JOBSTS
UJBSTS: MOVEI T1,(SJB) ;LOAD SUBJOB TO CHECK
JOBSTS T1, ;CHECK IT
JFCL ;THAT SHOULDN'T HAPPEN
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI SJB,NNN
; PUSHJ P,ISJOB
; HERE IF JNA OFF FOR THAT SUBJOB
; HERE IF JNA ON, WITH MJOB LOADED WITH JOBSTS
ISJOB: MOVE MJOB,T1 ;SAVE C(T1)
PUSHJ P,UJBSTS ;GET JOBSTS
EXCH MJOB,T1 ;GET JOBSTS INTO MJOB
JUMPL MJOB,CPOPJ1 ;SKIP IF JNA ON
POPJ P, ;REGULAR POPJ IF NOT
;
;-----------------------------------------------------------------------
;
;CALLED BY PUSHJ P,WHATJB
; ERROR
; NORMAL
;
;CALLED AT EOL SUBJOB REFERENCES
WHATJB: TLZ F,WASCOM ;IC'S
MOVEI SJB,(LASU) ;START WITH LAST USED
CAIN SJB,1000 ;NO CUR SUBJOB FLAG SET?
JUMPL F,NOCUR ;YES, ERROR RET IF NO INPUT
JUMPL F,CPOPJ1 ;SKIP BACK IF NO INPUT
PUSHJ P,STTYIN ;GET FIRST NON-BLANK
CAIN SJB,1000 ;NO CUR SUBJOB FLAG SET?
JUMPL F,NOCUR ;YES, ERROR RET IF NO INPUT
JUMPL F,CPOPJ1 ;REPEAT EOL CHECK
CAIG DATA,"9" ;SKIP IF OVER ASCII-9
CAIGE DATA,"0" ;SKIP IF OVER ASCII-0
JRST ALPHA2 ;ALPHABETIC
PUSHJ P,DECINZ ;GO GET DECIMAL NUMBER
CAIN DATA,"," ;SKIP IF NOT TERMED BY COMMA
TLOA F,WASCOM ;COMMA - SET BIT
JUMPGE F,CMDERR ;IF NOT COMMA, MUST BE EOL
JRST SJBLIM ;GO CHECK LIMITS
ALPHA2: PUSHJ P,SIXINZ ;GET SIXBIT WORD
CAIN DATA,"," ;DO ABOVE CHECK
TLOA F,WASCOM
JUMPGE F,CMDERR
JRST FINMNE ;SEARCH MNEMONIC TABLES
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI T1,NBR
; PUSH P,[EXP ADDR]
; PUSHJ P,TIMOUT
; ALWAYS RETURN WITH STACK ADJUSTED
;
;TYPES TIME AS LOADED INTO T1 TO OUTPUT ROUTINE AT ADDR
TIMOUT: MSTIME T1, ;READ CLOCK
HAVTIM: MOVEI T3,3 ;WILL TYPE NN:NN:NN
TIME1: IDIV T1,DIVTBL-1(T3) ;SPLIT DIGITS DOWN
PUSH P,T2 ;SAVE REMAINDER
IDIVI T1,^D10 ;SPLIT INTO 2 DIGITS
MOVEI DATA,"0"(T1) ;LOAD FIRST IN ASCII
PUSHJ P,@-2(P) ;GO SEND CHAR
MOVEI DATA,"0"(T2) ;LOAD SECOND
PUSHJ P,@-2(P) ;SEND THAT TOO
POP P,T1 ;RESTORE REMAINDER
SOJLE T3,APOPJ ;JUMP IF DONE
MOVEI DATA,":" ;LOAD COLON
PUSHJ P,@-1(P) ;DISPATCH
JRST TIME1 ;SEND THAT
DIVTBL: DEC 1000,60*1000,60*60*1000
;CONTROL-C INTERCEPT LOGIC
;CALLED BY PUSHJ P,INTINI
; RETURNS HERE WITH TRAP SET
INTINI: SKIPE .JBDDT## ;DEBUGGING OPSER?
POPJ P, ;YES, DO NOT SET UP ^C TRAP
MOVEI T1,INTBLK ;POINT TO INTERCEPT BLOCK
MOVEM T1,.JBINT## ;STORE FOR CONKLIN
MOVEI T1,INTRPT ;POINTER TO INTERUPT BLOCK
MOVEM T1,INTBLK ;STORE AWAY
MOVEI T1,2 ;CONTROL C
MOVEM T1,INTBLK+1
SETZM INTBLK+2 ;CLEAR ENABLE FLAGS
SETZM INTBLK+3 ; ..
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;HERE FROM MONITOR ON A CONTROL-C
;NOW FOLLOWS THE NEW CONTROL/C INTERCEPT CODE, WHICH IS RE-ENTRANT
;AND SHOULD KEEP USERS FROM CONTROL/C'ING OUT OF OPSER ON A SLOW
;SYSTEM.
;
INTRPT: SETZM INTBLK+2 ;JUST CLEAR THIS WORD, SINCE
; WE DON'T USE IT AND IT TURNS
; THE INTERCEPT OFF.
TLZ F,RENBIT ;CLEAR SOME BITS
TLO F,BRK ;MAKE PTY LOOK DONE
MOVE P,[IOWD PDLSIZ,PDL] ;RESET THE STACK
CLRBFI ;CLEAR ANY TYPE-AHEAD.
PUSHJ P,FINISH ;SEE IF WE CAN :EXIT
JRST SETUP ;GO BACK AND LISTEN.
; THE CODE AT SETUP WILL CALL
; INTINI TO FINISH CLEANING UP
; AFTER THE INTERCEPT.
;
;-----------------------------------------------------------------------
;
;GET THE UPTIME
;USES T1 AND T2 ANSWER IN T1
GETUPT: MOVE T1,[%CNSUP] ;GET SYSTEM UPTIME (7 SERIES)
GETTAB T1, ;GET IT
CAIA ;FAILED, MUST BE PRE 7 SERIES
JRST GETUP1 ;GOT TIME, CONVERT IT
MOVE T1,[%NSUPT] ;THIS ROUTINE DOES
GETTAB T1, ; THE OBVIOUS THING
SETZ T1, ; OF GETTING THE UPTIME
GETUP1: MULI T1,^D1000 ;THEN CONVERTING TO
DIV T1,JIFSEC ;MILLISECONDS.
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
JIFINI: MOVE T1,[%CNSTS] ;COMPUTE THE NUMBER OF
GETTAB T1, ;JIFFIES PER SECOND
SETZ T1, ; ..
TLNN T1,(1B6) ;IS THE 50 CYCLE BIT ON?
SKIPA T1,[^D60] ;NO--ASSUME 60
MOVEI T1,^D50 ;YES--ASSUME 50
MOVEM T1,JIFSEC ;STORE AWAY
POPJ P,
;
;-----------------------------------------------------------------------
;
;SUBROUTINE TO TURN ON TTY OUTPUT
;CALLED BY PUSHJ P,LOUD
; RETURN HERE
;BITS ARE RESTORED BY THE MATCHING POPJ. DO NOT CALL ANY TTY OR PTY
;INPUT ROUTINES WHILE STATUS BITS ARE MESSED UP.
LOUD: MOVEM F,SAVEF ;SAVE FLAGS
TLZN F,AUTOM!QUIET!AUXQ ;CLEAR SOME BITS
POPJ P, ;NONE SET-- JUST GO
POP P,(P) ;FIX STACK
PUSHJ P,@1(P) ;CALL SUBROUTINE
JFCL
IOR F,SAVEF ;TURN BITS BACK ON
POPJ P, ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL TELETYPE IO SUBROUTINES
;
;-----------------------------------------------------------------------
;
SPOUT: MOVEI DATA,SP
JRST TTYOUT
COMOUT: MOVEI DATA,","
JRST TTYOUT
COLOUT: MOVEI DATA,":"
JRST TTYOUT
TABOUT: MOVEI DATA,TAB
JRST TTYOUT
TABOU1: TLNE F,AUXQ!QUIET!AUTOM ;ECHO TAB?
JRST DSKTAB ;FOR :TSILENCE
PUSH P,DATA ;SAVE DATA
MOVEI DATA,TAB ;LOAD A TAB
TLON F,FREETB ;HAVE WE GIVEN A TAB
PUSHJ P,TTYOUT ;PRINT A TAB
POP P,DATA ;RESTORE CHAR.
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI DATA,CHAR
; PUSHJ P,TTYOUT
;SUBR WILL ECHO TO LOG FILE
TTYOUT: TLNE F,AUTOM!QUIET!AUXQ ;SKIP IF BOTH OFF
JRST DSKTST ;FOR :TSILENCE
PUSHJ P,DSKOUT ;PUT IN LOG ALSO
TLZ F,REPL ;ZERO BIT
OUTCHR DATA ;SEND CHAR TO MONITOR
POPJ P, ;RETURN
IFN FTTLOG,<
DSKTAB: MOVE W,SJBFLG(SJB) ;GET FLAGS FOR SUBJOB
TLNN W,(TSIL) ;:TSILENCE MODE?
POPJ P, ;NO--RETURN
PUSH P,DATA ;SAVE CHAR
MOVEI DATA,TAB ;PICK UP TAB
TLON F,FREETB ;FLAG THE RAB AND GIVE JUST 1
PUSHJ P,DSKOUT ;TYPE THE TAB ON THE DISK
POP P,DATA ;RESTORE DATA
DSKTST: SKIPE FRCLOG ;DO WE WANT TO FORCE THIS INTO LOG?
JRST DSKOUT ;YES-- GO LOG IT
MOVE W,SJBFLG(SJB) ;GET SUBJOB FLAGS
TLNN W,(TSIL) ;:TSILENCE MODE?
POPJ P, ;NO--JRST RETURN
JRST DSKOUT ;YES--PUT ON DISK
>
IFE FTTLOG,<
DSKTAB:
DSKTST: POPJ P,
>
;
;-----------------------------------------------------------------------
;
;SUBR TO RETURN NEXT NON-BLANK CHAR
STTYIN: PUSHJ P,TTYIN ;GET NEXT CHAR
CAIN DATA,SP ;SKIP IF NON-SPACE
JRST STTYIN ;GO IGNORE
CAIN DATA,TAB ;[122]SKIP IF NON-TAB
JRST STTYIN ;[122]GO IGNORE
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;SUBR TO RESCAN TO BEGINNING OF BUFFER
RESCA1: TLZ F,BRK ;ZERO BREAK BIT
PUSH P,[POINT 7,TTIBUF] ;PUSH ORIGINAL POINTER
POP P,TTIPTR ;POP BACK IN PTR SPOT
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;SUBR TO GET NEXT CHAR FROM TTY INPUT BUFFER
TTYIN: PUSHJ P,SAVACS ;SAVE REGISTERS
MOVE DATA,SAVCH ;LOAD THE SAVED CHAR
SETZM SAVCH ;CLEAR THE SAVINGS ACCOUNT
JUMPN DATA,CPOPJ ;JUMP IF ANYTHING WAS SAVED
TLZ F,REPL ;ZERO BEG OF LINE FLAG
JUMPGE F,GETB3 ;JUMP IF MORE CHARS LEFT
FILBUF: MOVEI T1,LINSIZ ;LOAD SIZE IN BYTES
MOVE PT1,[POINT 7,TTIBUF] ;LOAD POINTER TO BEG OF BUF
MOVEM PT1,TTIPTR ;STORE FOR LATER USE
FILL1: SOJL T1,TOOMCH ;JUMP IF LINE TO LARGE
PUSHJ P,GENIN ;LOAD A CHAR
IDPB DATA,PT1 ;STORE IN BUFFER
PUSHJ P,ISBRK ;CHECK IF BREAK CHARACTER
JRST ITIS ;IT IS ONE
JRST FILL1 ;KEEP LOOPING
TOOMCH: PUSHJ P,GENIN ;GET NEXT CHAR
PUSHJ P,ISBRK ;CHECK FOR BREAK CHAR
SKIPA
JRST TOOMCH ;IGNORE ALL NON-BREAK
MOVEI PT1,[ASCIZ/?OPRLTL Input line too long
/]
PUSHJ P,MOUT ;YELL AND SCREAM AT HIM
MOVSI T1,(<LF>B6) ;LOAD LF & NULLS
MOVEM T1,TTIBUF ;STORE IN BUFFER
JRST GETB3 ;PROCEDE
ITIS: SETZ DATA, ;MAKE MANY 0 BITS
IDPB DATA,PT1 ;FORM WONDERFUL ASCIZ STRING
GETB3: ILDB DATA,TTIPTR ;GET FROM BUFFER
JUMPE DATA,FILBUF ;IGNORE NULLS
TLO F,BRK ;SET BREAK BIT
PUSHJ P,ISBRK ;SKIP IF NON-BREAK
POPJ P, ;RETURN N
TLZ F,BRK ;NOT BREAK
CAIN DATA,CTRLA ;SKIP IF NOT ^A
MOVEI DATA,CTRLC ;TRANSLATE TO ^C
CAIN DATA,CTRLB ;SKIP IF NOT ^B
MOVEI DATA,CTRLO ;TRANSLATE TO ^O
CAIN DATA,CTRLE ;SKIP IF NOT ^E
MOVEI DATA,ALT ;CONVERT TO ESCAPE
TLNE F,MSG ;SKIP IF NOT PTY TEXT
POPJ P, ;OTHERWISE RETURN NOW
CAIN DATA,CR ;SKIP IF NOT CR
JRST GETB3 ;IGNORE THEM
CAIL DATA,140 ;SKIP IF UPPER CASE
SUBI DATA,40 ;TRANSLATE TO UPPER
CAIN DATA,TAB ;SKIP IF NOT TAB
MOVEI DATA,SP ;MAKE INTO SPACE
POPJ P, ;RETURN WITH CHAR
GENIN: IFN FTAUTO,<
TLNN F,AUTOM ;SKIP IF WE'RE IN AUTO MODE
JRST GENIN1 ;NOT--SKIP CODE
GENIN2: SOSG AUTIB+2 ;DDECR COUNT & SKIP IF MORE LEFT
IN AUTOC, ;ADVANCE BUFFERS
JRST GENIN3 ;SKIP THIS CODE
PUSHJ P,SAVACS ;SAVE ALL REGISTERS
GETSTS AUTOC,T1 ;LOAD STATUS INTO T1
PUSHJ P,AUTREL ;RELEASE THE CHANNEL
MOVEI PT1,[ASCIZ/?OPRAFE AUTO file read error
/]
TRNN T1,IO.EOF ;SKIP IF END OF FILE
PUSHJ P,MOUT ;TYPE ON CONSOLE
MOVE DATA,BRKLST ;LOAD A BREAK CHAR
JRST DSKOUT ;SEND TO LOG FILE
GENIN4: AOS AUTIB+1 ;POINT AT NEXT WORD
MOVNI DATA,6 ;ADJUST COUNT OF CHARS
ADDM DATA,AUTIB+2 ; LEFT IN BUFFER
GENIN3: IBP AUTIB+1 ;POINT TO NEXT BYTE
MOVE DATA,@AUTIB+1 ;GET NEXT INPUT WORD
TRZE DATA,1 ;TEST FOR SEQUENCE #
JRST GENIN4 ;STRIP IT OFF
LDB DATA,AUTIB+1 ;GET NEXT DATA CHAR
JUMPE DATA,GENIN2 ;JUMP IF NULL TO NEXT BYTE
JRST DSKOUT ;SEND TO LOG
>
GENIN1: INCHRW DATA ;LOAD A BYTE
JUMPE DATA,GENIN1 ;IGNORE NULLS
JRST DSKOUT ;SEND TO LOG
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI SJB,NNN
; PUSHJ P,PUTNAM
; ALWAYS RETURN
;
;TYPES SUBJOB MNEMONIC, IF ONE, ELSE SUBJOB NUMBER IN DECIMAL
PUTNAM: SKIPE T1,MNEMON(SJB) ;LOAD T1 WITH MNEMONIC, IF ANY
JRST SIXBP ;TYPE SIXBIT
MOVEI T1,(SJB) ;LOAD SUBJOB NUMBER
JRST DECOUT ;TYPE IN DECIMAL
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVE T1,[SIXBIT/NAME/]
; PUSHJ P,SIXBP
; ALWAYS RETURN
;
;TYPES WORD IN SIXBIT
SIXBP: MOVE PT1,[POINT 6,T1] ;LOAD POINTER
SIXBP1: ILDB DATA,PT1 ;GET FIRST CHAR
JUMPE DATA,CPOPJ ;RETURN IF DONE
ADDI DATA,40 ;MAKE ASCII OF SIXBIT
PUSHJ P,TTYOUT ;TYPE IT
TLNE PT1,770000 ;SKIP IF PTR DONE
JRST SIXBP1 ;NO - MORE BYTES TO GO
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI PT1,[ASCIZ/message/]
; PUSHJ P,MOUT
; ALWAYS RETURN
;
;TYPES MESSAGE AT ADDRESS IN RH OF PT1
MOUT: HRLI PT1,440700 ;MAKE ASCII POINTER
MOVE DATA,PT1 ;COPY THE POINTER
ILDB DATA,DATA ;GET THE FIRST CHARACTER
CAIN DATA,"?" ;ERROR MESSAGE
PUSHJ P,LOUD ;YES, FORCE OUTPUT TO THE OPERATOR
MOUT1: ILDB DATA,PT1 ;LOAD FIRST BYTE
JUMPE DATA,CPOPJ ;RETURN IF NULL
PUSHJ P,TTYOUT ;TYPE CHAR
JRST MOUT1 ;GO GET NEXT BYTE
;
;-----------------------------------------------------------------------
;
;SUBR TO TYPE RETURN-LINE-FEED
CRLF: MOVEI DATA,CR ;LOAD RETURN
PUSHJ P,TTYOUT ;TYPE THAT
MOVEI DATA,LF ;LOAD LINE FEED
JRST TTYOUT ;TYPE THAT
;
;-----------------------------------------------------------------------
;
;SUBR TO TYPE RETURN-FORM-FEED
CRFF: MOVEI DATA,CR ;LOAD RETURN
PUSHJ P,TTYOUT ;TYPE THAT
MOVEI DATA,FF ;LOAD FORM FEED
JRST TTYOUT ;TYPE THAT
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI T1,NBR
; MOVEI T3,RADIX
; PUSHJ P,NBROUT
;
;TYPES C(T1) IN RADIX IN T3
;CALL DECOUT FOR DECIMAL, OCTOUT FOR OCTAL
OCTOUT: SKIPA T3,[10] ;LOAD 10 IN RADIX REGISTER
DECOUT: MOVEI T3,^D10 ;LOAD DECIMAL 10
NBROUT: IDIVI T1,(T3) ;DIVIDE BY RADIX
HRLM T2,(P) ;PUT REMAINDER ON PDL
SKIPE T1 ;SKIP IF DONE
PUSHJ P,NBROUT ;KEEP GOING
HLRZ DATA,(P) ;RETRIEVE LAST DIGIT
ADDI DATA,"0" ;MAKE ASCII OF BINARY
JRST TTYOUT ;TYPE ON CONSOLE
;
;-----------------------------------------------------------------------
;
;CALLED BY PUSHJ P,SIXIN
; ALWAYS RETURN
;
;INPUTS SIXBIT WORD FROM TTY
;DELIMITER IS FIRST NON-ALPHANUMERIC CHARACTER
SIXIN: PUSHJ P,STTYIN ;GET FIRST NON-BLANK CHAR
SIXINZ: SETZ CMD, ;START WITH ZERO
MOVE PT1,[POINT 6,CMD] ;LOAD POINTER
SIXI1: CAIL DATA,"0" ;SKIP IF TOO SMALL
CAILE DATA,"Z" ;FALL THROUGH IF TOO LARGE
POPJ P, ;RETURN
CAILE DATA,"9" ;SKIP IF NUMERIC
CAIL DATA,"A" ;SKIP IF NON-ALPHANUMERIC
JRST SIXI2 ;GO DEPOSIT
POPJ P, ;RETURN
SIXI2: SUBI DATA,40 ;CONVERT TO SIXBIT
TLNE PT1,770000 ;SKIP IF POINTER DONE
IDPB DATA,PT1 ;DEPOSIT INTO REGISTER
PUSHJ P,TTYIN ;FETCH NEXT CHAR
JRST SIXI1 ;GET NEXT CHAR
;
;-----------------------------------------------------------------------
;
;SUBR TO INPUT DECIMAL NBR - RESULT IN REGISTER CMD
DECIN: PUSHJ P,STTYIN ;GET FIRST NON-BLANK
DECINZ: SETZ CMD, ;START WITH ZERO
DEC1: CAIL DATA,"0" ;SKIP IF TOO SMALL
CAILE DATA,"9" ;SKIP IF DECIMAL
POPJ P, ;RETURN
IMULI CMD,^D10 ;MULTIPLY BY 10
ADDI CMD,-"0"(DATA) ;ADD DIGIT IN
PUSHJ P,TTYIN ;GET NEXT CHARACTER
JRST DEC1 ;LOOP
;
;-----------------------------------------------------------------------
;
;SUBR TO INPUT OCTAL NBR - RESULT IN REGISTER CMD
OCTIN: PUSHJ P,STTYIN ;GET FIRST NON BLANK
OCTINZ: SETZ CMD, ;START WITH ZERO
OCT1: CAIL DATA,"0" ;SKIP IF TOO SMALL
CAILE DATA,"7" ;SKIP IF OCTAL
POPJ P, ;RETURN
ASH CMD,3 ;MAKE ROOM FOR DIGIT
TRO CMD,-"0"(DATA) ;PUT DIGIT IN
PUSHJ P,TTYIN ;GET NEXT CHAR
JRST OCT1 ;LOOP FOR NEXT
;
;-----------------------------------------------------------------------
;
;RDX60W -- INPUT A RADIX 60 NUMBER FROM COMMAND STRING
;RDX60 -- DITTO (CHARACTER ALREADY IN DATA)
;FORMATS ARE XXYYZZ OR XX:YY:ZZ
;CALL: PUSHJ P,RDX60/RDX60W
; RETURN IF COMMAND ERROR
; RETURN WITH WORD IN CMD
;USES T1, T2, T3 UPDATES DATA (SEPARATOR)
RDX60W: PUSHJ P,TTYIN ;PRIME THE PUMP
RDX60: MOVEI T2,0 ;PRESET TEMPORARY RESULT
RDX601: IMULI T2,^D100 ;ADVANCE TO NEXT RESULT
JUMPL F,RDX605 ;JUMP IF END OF LINE
PUSHJ P,DECINZ ;GET NEXT SUPER-DIGIT
ADD T2,CMD ;ADD TO ACCUMULATOR
CAIE DATA,":" ;SEE IF MORE TO COME
JRST RDX605 ;NO--GO CONVERT RESULT
TLNE T2,(777B8) ;DON'T ALLOW OVERFLOW
JRST BADTIM ;ERROR IF TIME TOO LARGE
CAIL CMD,^D60 ;DON'T ALLOW GARBAGE IN
JRST BADTIM ;ERROR IF DIGIT TOO LARGE
JUMPL F,RDX605 ;JUMP IF EOL
PUSHJ P,TTYIN ;SKIP SEPARATOR
JRST RDX601 ;LOOP BACK FOR MORE
RDX605: MOVEI CMD,0 ;CLEAR RESULT
RDX606: IDIVI T2,^D100 ;SEPARATE TYPEIN
HRLM T3,(P) ;STORE LEAST DIGIT AWAY
SKIPE T2 ;SKIP IF ALL DONE
PUSHJ P,RDX606 ;IF NOT, DO SOME MORE
JFCL 17,.+1 ;CLEAR OVERFLOW
HLRZ T1,(P) ;GET BACK HIGHEST DIGIT
IMULI CMD,^D60 ;MAKE ROOM IN RESULT
ADD CMD,T1 ;INCLUDE RESULT
CAIL T1,^D60 ;SEE IF ERROR
JRST BADTIM ;COMPLAIN IF COMPONENT TOO BIG
JRST CPOPJ1 ;RETURN
BADTIM: JSP PT1,MOUT ;COMMAND ERROR
ASCIZ /?OPRBTS Bad time specified
/
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI DATA,CHAR
; PUSHJ P,ISBRK
; HERE IF BREAK CHAR
; HERE IF NOT
;
;HARMS NO REGISTERS
ISBRK: PUSH P,T1 ;SAVE T1
MOVSI T1,-BRKLTH ;MAKE XWD OF TBL LENGTH
CAME DATA,BRKLST(T1) ;MATCH?
AOBJN T1,.-1 ;NO, CHECK NEXT ONE
SKIPL T1 ;SKIP IF MATCH
AOS -1(P) ;SKIP RETURN
POP P,T1 ;RESTORE T1
POPJ P, ;RETURN TO CALLER
BRKLST: EXP CTRLC,BELL,LF,VT,FF,CTRLZ,ALT ;[121],ALT175,ALT176
BRKLTH==.-BRKLST
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL PTY IO ROUTINES
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI SJB,NNN
; PUSHJ P,IPTY
; ERROR
; SUCCESS
;
;INITS FIRST FREE PTY ON CHANNEL=C(SJB)
IPTY: SETZB T2,BLK3 ;CLEAR T2, WANT ASCII MODE
SETO T1, ;IN CASE GENERIC INIT FAILS
JRST ONMO.1 ;TRY GENERIC FIRST
ONMORE: MOVEI T2,(T1) ;LOAD DIGIT
CAILE T2,777 ;HIGHEST PTY NUMBER EVER
JRST NOMOR ;WELL, THAT'S IT
LSHC T2,-6 ;SPLIT DIGITS
LSH T2,3 ;SHIFT HIGH ORDER LEFT BY 3
LSHC T2,3 ;SHIFT DOUBLE BACK
LSH T2,3 ;SHIFT HIGH ORDER LEFT BY 3
LSHC T2,3 ;SHIFT DOUBLE BACK
TRO T2,202020 ;MAKE 6BIT
TRNN T2,570000 ;SKIP IF HIGH ORDER NOT 0
LSH T2,6 ;SHIFT OUT OF XWD
TRNN T2,570000 ;SKIP IF HIGH ORDER NOT 0
LSH T2,6 ;SHIFT OUT OF XWD
ONMO.1: HRLI T2,'PTY' ;PUT PTY IN 6BIT IN LH
MOVEM T2,BLK3+1 ;STORE IN OPEN BLOCK
JUMPL T1,ONMO.2 ;SKIP IF GENERIC PTY TRY
DEVCHR T2, ;FIND OUT ABOUT THIS PTY
JUMPE T2,NOMOR ;OUT OF PTY'S IF NON-EXISTANT
TLNE T2,(DV.AVL) ;AVAILABLE TO US
TRNE T2,DV.ASP ;YES, BUT ALREADY INITED
AOJA T1,ONMORE ;TRY AGAIN
ONMO.2: MOVEI T2,PTBSIZ ;LOAD SIZE OF BLOCK
IMULI T2,(SJB) ;MULTIPLY BY SUBJOB OFFSET
MOVEI T3,PTBFS(T2) ;LOAD BUFFERS ADDR INTO T3
HRLI T2,PTOB(T2) ;PUT OUTPUT HDR ADDR IN LH
ADDI T2,PTIB ;MAKE INPUT HDR ADDR IN RH
MOVEM T2,BLK3+2 ;STORE IN OPEN BLOCK
MOVSI T2,(SJB) ;PUT SUBJOB NBR IN LH
LSH T2,5 ;SHIFT INTO AC POSITION
MOVE T4,T2 ;SAVE FOR LATER USE
IOR T2,[OPEN BLK3] ;MAKE OPEN INSTRUCTION
XCT T2 ;INIT PTY
AOJA T1,ONMORE ;TRY NEXT PTY NUMBER
;FALL INTO ONMO.3 ON THE NEXT PAGE
ONMO.3: TDO F,USE(SJB) ;SET IN USE BIT
EXCH T3,.JBFF ;PUT BUFFER ADDR IN .JBFF
MOVE T1,T4 ;LOAD SUBJOB IN AC POSITION
IOR T1,[OUTBUF 1] ;MAKE OUTBUF UUO
XCT T1 ;DO IT
MOVE T1,T4 ;LOAD SUBJOB AGAIN
IOR T1,[INBUF 1] ;MAKE INBUF UUO
XCT T1 ;DO THAT
MOVEM T3,.JBFF ;RESTORE .JBFF
MOVE T1,T4 ;RELOAD SUBJOB
TLO T1,(OUTPUT) ;MAKE OUTPUT UUO
XCT T1 ;DO IT ONCE
XCT T1 ;ONE MORE TIME
MOVE T1,T4 ;LOAD AGAIN
IOR T1,[STATO IO.DER] ;CHECK FOR DEVICE ERROR
XCT T1 ;SKIP IF SO
JRST CPOPJ1 ;NONE - ALL IS FINE
PUSHJ P,RPTYN ;RELEASE PTY & SUBJOB
JSP PT1,MOUT ;TYPE MESSAGE
ASCIZ /?OPRNTD No more tty DDB's
/
;
;-----------------------------------------------------------------------
;
;CALLED BY MOVEI SJB,NNN
; PUSHJ P,STOPJB
; ERROR
; JOB STOPPED IN ^C STATE
STOPJB: PUSHJ P,CSTOP ;SKIP IF NOT STOPPED ALREADY
JRST CPOPJ1 ;SKIP BACK IF DONE
STOP.1: PUSH P,[EXP MAXCTC] ;PUSH ON LIST
STOP1: MOVEI DATA,CTRLC ;LOAD ASCII ^C
PUSH P,F ;SAVE FLAGS
TLZ F,AUTOM ;CLEAR AUTO COMMAND FLAG
PUSHJ P,PTYOUT ;SEND TO SUBJOB
POP P,F ;RESTORE FLAGS
PUSHJ P,QGBUF ;GET REPLY
PUSHJ P,CSTOP ;SKIP IF NO SOAP
JRST XPOPJ1 ;DONE - SKIP BACK
SOSL (P) ;DECREMENT COUNT
JRST STOP1 ;STILL TIME
POP P,(P) ;CLEAR STACK OF GARBAGE
PUSHJ P,UJBSTS ;GET JOBSTS
TLNE T1,(JB.UJC) ;SKIP IF NO JACCT
JRST STUCK ;ANNOUNCE STUCK IN JACCT
MOVE T1,[SIXBIT /OPRCMM/]
PUSHJ P,QMESG
JSP PT1,MOUT
ASCIZ / cannot be put in monitor mode
/
STUCK: MOVE T1,[SIXBIT /OPRSWJ/] ;BUZZ WORD
PUSHJ P,QMESG ;TYPE IT
JSP PT1,MOUT
ASCIZ / is stuck with JACCT on
/
;
;-----------------------------------------------------------------------
;
DUMPT: MOVEI T1,PTBSIZ ;GET UNIT SIZE OF PTY BLOCK
IMULI T1,(SJB) ;INCR TO THIS PTY'S BLOCK
MOVE T1,PTOB(T1) ;LOAD ADDR OF 2ND WORD OF BUFFER
SKIPN 2(T1) ;SKIP IF ANY DATA IN BUFFER
POPJ P, ;RETURN TO CALLER
IFN FTAUTO,<
MOVEI T2,10 ;GIVE IT 8 TRIES
DUMPT1: TLNN F,AUTOM ;SKIP IF IN AUTO MODE
JRST DUMPT2 ;NOT -- GET FROM TTY
PUSHJ P,UJBSTS ;GET JOBSTS
TLNE T1,(JB.UDI) ;WANTS INPUT?
JRST DUMPT2 ;YES IT DOES
TLNE T1,(JB.UOA) ;WANTS TO BARF?
JRST [PUSHJ P,GBUF ;TRANSFER THE DATA
MOVEI T2,10 ;START THE COUNT AGAIN AFTER OUTPUT
JRST DUMPT1] ;LOOK FOR MORE
PUSH P,T1 ;SAVE JOB NUMBER
MOVEI T1,SNOOZT ;STANDARD SLEEP TIME
SLEEP T1, ;WAIT FOR JOB READY
POP P,T1 ;RESTORE THE JOB NUMBER
HRLI T1,(T1) ;PLACE JOB NUMBER IN LEFT HALF
HRRI T1,.GTRTD ;FIND OUT IF THE JOB IS HIBERNATING
GETTAB T1, ;FOR TTY INPUT READY
JRST DUMPT2 ;WHAT!!!
TLNN T1,(1B13!1B14) ;CHECK JOBS HIBER BITS
SOJG T2,DUMPT1 ;TRY AGAIN (NOT TOO MANY THOUGH)
>
DUMPT2: MOVSI T1,(SJB) ;PUT SUBJOB NBR IN LH
LSH T1,5 ;SHIFT TO AC POSITION
TLO T1,(OUTPUT) ;MAKE OUTPUT UUO
XCT T1 ;SEND BUFFER
POPJ P, ;RETURN
;
;-----------------------------------------------------------------------
;
PTMOUT: HRLI PT1,440700 ;MAKE ASCII POINTER
PTMOU1: ILDB DATA,PT1 ;GET A CHAR
JUMPE DATA,CPOPJ ;RETURN IF NULL
PUSHJ P,PTYOUT ;SEND TO PTY
JRST PTMOU1 ;LOOP
PTOCT: IDIVI T1,8 ;BREAK WORD DOWN
HRLM T2,(P) ;STORE DIGIT ON PDL
SKIPE T1 ;SKIP IF DONE
PUSHJ P,PTOCT ;GO ON
HLRZ DATA,(P) ;RETRIEVE DIGIT
ADDI DATA,"0" ;MAKE ASCII OF BINARY
PTYOUT: MOVEI T1,PTBSIZ ;GET SIZE OF PTY BLOCK
IMULI T1,(SJB) ;COMPUTE OFFSET
PUSH P,T1 ;SAVE ON PDL
SOSG PTOB+2(T1) ;DECR BYTE COUNT
PUSHJ P,DUMPT ;FORCE BUFFER
POP P,T1 ;RESTORE POINTER ADDRESS
IDPB DATA,PTOB+1(T1) ;STORE BYTE
PUSHJ P,ISBRK ;CHECK IF BREAK CHAR
JRST DUMPT ;IT IS--SEND BUFFER
POPJ P, ;RETURN
GBUF: MOVE T1,SJBFLG(SJB) ;NOW GET SJB STATUS
TLNN T1,(DALSHH) ;:SLOGIN IN PROGRESS?
JRST GBUF6 ;NO--PROCEED
PUSHJ P,UJBSTS ;YES--GET THE JOB STATUS
TLNN T1,(JB.ULI) ;LOGGED IN?
JRST GBUF6 ;NO--CONTINUE
TLNN T1,(JB.UOA) ;REAL OUTPUT?
JRST GBUF6 ;NO--FREE CALL
MOVSI T1,(DALSHH) ;YES--CLEAR THE SILENCE BIT
ANDCAB T1,SJBFLG(SJB) ; AND RELOAD THE AC
GBUF6: TLNN T1,(SHH!DALSHH!ERONLY) ;SKIP IF ANY BIT ON
TLZA F,QUIET ;ZERO BIT OUT
QGBUF: TLOA F,QUIET ;JUST SEND TO LOG FILE
TLO F,AUXQ ;TURN ON ANOTHER BIT
SETZM EAFLAG ;PRENTEND WE ARE NOT IN AUTO MODE
TLZE F,AUTOM ;ARE WE IN AUTO MODE?
SETOM EAFLAG ;YES--NOTE THAT FACT
TLZ F,HEADR ;GIVE A HEADER
PUSH P,[EXP MOSTBF] ;PUSH MAX NBR OF BUFFERS
MOVEI T1,PTBSIZ ;LOAD SIZE OF UNIT BLOCK
IMULI T1,(SJB) ;INCR TO THIS SUBJOB
MOVEI T2,PTIB+1(T1) ;LOAD BYTE POINTER ADDR INTO T2
PUSH P,T2 ;STACK IT
MOVEI T1,PTIB+2(T1) ;LOAD BYTE COUNT ADDR INTO T2
PUSH P,T1 ;STACK THAT TOO
TLO F,LCR!NOREP ;INITIAL FLAGS
GBUF1: PUSH P,[EXP CHANCE] ;STORE NBR OF TRIES
SOSGE -3(P) ;DECR COUNT & SKIP IF OK
JRST MCR ;HE LOSES
GBUF2: PUSHJ P,UJBSTS ;GET JOBSTS
TLNN T1,(JB.UOA) ;SKIP IF OUTPUT READY
JRST DECRL ;COUNTDOWN
HRLZ T1,SJB ;GET SJB NBR IN LH
LSH T1,5 ;SHIFT TO AC POSITION
TLO T1,(INPUT) ;MAKE INPUT UUO
XCT T1 ;EXECUTE IT
SKIPG @-1(P) ;SKIP IF BYTE COUNT POSITIVE
JRST DECRL ;FALSIE BITSY
GBUF4: SOSL @-1(P) ;SKIP IF BUFFER EMPTY
JRST GBUF5 ;HOP OVER SOME CODE
POP P,(P) ;POP CHANCE OFF STACK
JRST GBUF1 ;RESTART
GBUF5: ILDB DATA,@-2(P) ;GET BYTE
JUMPE DATA,GBUF4 ;IGNORE NULLS
CAIN DATA,EOT ;AND ^D'S
JRST GBUF4 ;......
PUSHJ P,ISBRK ;IS IT A BREAK CHAR?
JRST NOCHNG ;YES--SKIP CODE
TLNN F,LCR ;SKIP IF LAST CHAR A CR
JRST END5 ;HOP OVER SOME CODE
CAIN DATA,CR ;SKIP IF NOT ANOTHER CR
JRST GBUF4 ;IT IS--IGNORE IT
PUSH P,DATA ;SAVE THE CHARACTER
MOVEI T1,BELL ;LOAD A BELL
EXCH DATA,T1 ;PLACE IN RIGHT AC
TLZ F,FREETB ;CAUSE A TAB TO HAPPEN
CAIE T1,"%"
CAIN T1,"?"
PUSHJ P,CHKWRN ;SEND DING TO TTY
POP P,DATA ;RESTORE CHARACTER
END5: CAIN DATA,CR ;SKIP IF NOT CR
TLOA F,LCR ;A CR!
TLZ F,LCR ;ZILCH BIT
NOCHNG: CAILE DATA,41 ;BIGGER THAN A SPACE
PUSHJ P,HEAD0 ;YES--DO ALL GOOD THINGS
PUSHJ P,TABOU1 ;SEND THE CHARACTOR
CAIE DATA,LF ;IS THIS A LINE FEED?
JRST GBUF4 ;NO--GET THE NEXT ONE
TLO F,AUXQ ;YES--START BEING QUIET
MOVE DATA,SJBFLG(SJB) ;LOOK AT THE SUBJOB FLAGS
TLNE DATA,(ERONLY) ;WANT ONLY ERROR LINES
TLO F,QUIET ;YES, RESET QUIET BIT
JRST GBUF4 ;RESUME READING
DECRL: SOSLE (P) ;DECR COUNT
JRST TIMLFT ;TIME STILL LEFT
MCR: SUB P,[4,,4] ;DISHONESTLY POP 4 MJOBS
PUSHJ P,CRLF ;TYPE CR-LF
TLZ F,QUIET!AUXQ ;INSURE LOAD MODE BACK ON
SKIPE EAFLAG ;IN AUTO MODE?
TLO F,AUTOM ;YES--RELIGHT THE BIT
POPJ P, ;RETURN TO CALLER
TIMLFT: PUSHJ P,UJBSTS ;GET JOBSTS
TLNE T1,(JB.UDI) ;IS JB.UDI ON?
JRST GBUF2 ;YES--BE DONE WITH IT
MOVEI T1,SNOOZT ;LOAD ONE
SLEEP T1, ;SLEEP FOR A WHILE
JRST GBUF2 ;CONTINUE
RPTY: PUSHJ P,STOPJB ;STOP THAT JOB!
POPJ P, ;LOSE
PUSHJ P,ISJOB ;SKIP IF JNA ON
JRST RPTYN ;NOT--JUST RELEASE CHANNEL
MOVEI PT1,LGOMSG ;LOGOUT MESSAGE
MOVE T1,[%CNST2] ;[126]SEE IF ON GALAXY-10
GETTAB T1, ;[126]GET 2ND CONFIG TABLE WORD
SETZ T1, ;WHOOPS, NOT EVEN 6.02
TRNE T1,ST%GAL ;[127]IF BIT IS ZERO, NORMAL MPB
MOVEI PT1,GALMSG ;GET LOGOUT V100 STRING
PUSHJ P,PTMOUT ;SEND MESSAGE
RPTY.1: PUSHJ P,QGBUF ;GET REPLY
PUSHJ P,UJBSTS ;GET JOBSTS OF PTY
JUMPGE T1,RPTYN ;RETURN PTY IF JOB IS GONE
TLNN T1,(JB.UDI) ;WANT INPUT
JRST RPTY.1 ;NO, LOOK AGAIN
MOVE T1,[SIXBIT/OPRCKJ/] ;PREFIX
PUSHJ P,QMESG ;RING THE BELL, TYPE SUBJOB NUMBER
JSP PT1,MOUT ;TYPE STRING AND RETURN
ASCIZ/ cannot be KJOB'ed
/
RPTYN: SETZM MNEMON(SJB) ;CLEAR MNEMONIC
SETZM SJBFLG(SJB) ;CLEAR FLAGS
TDZ F,USE(SJB) ;CLEAR IN USE FLAG
MOVSI T1,(SJB) ;LOAD INTO LH
LSH T1,5 ;SHIFT INTO AC POSITION
TLO T1,(RELEAS) ;MAKE RELEASE UUO
XCT T1 ;GET RID OF PTY
POPJ P, ;RETURN TO CALLER
LGOMSG: ASCIZ \DEASSI
KJOB OPRKJO.LOG=/W/B/Z:0/VD:P
\
GALMSG: ASCIZ \DEASSI
KJOB/BATCH/NOMESSAGES
\
CHKWRN: TLZ F,AUXQ ;CLEAR THE AUX FLAG
PUSHJ P,TTYOUT ;GIVE A DING
TLO F,AUXQ ;PUT THE BIT BACK ON
CHKERR: MOVE T2,SJBFLG(SJB) ;GET THE FLAGS
TLNN T2,(DALSHH) ;FORCE IF HERE DURING :SLOG
TLNE T2,(ERONLY) ;DOES HE WANT ERRORS
TLZ F,QUIET ;YES MAKE NOISE
PUSHJ P,HEAD0 ;GIVE A HEADER
JRST TTYOUT ;GO PRINT
HEAD0: TLZN F,AUXQ ;ARE WE QUIET
POPJ P, ;NO WE WERE REVIVED
HEAD: TLOE F,HEADR ;HAVE WE GIVEN A HEADER
POPJ P, ;GAVE ONE
PUSH P,DATA ;SAVE DATA
PUSH P,[EXP TTYOUT] ;STORE ADDR OF OUTPUT ROUTINE
PUSHJ P,TIMOUT ;TYPE CURRENT TIME
MOVEI DATA,"(" ;OPEN PARENS
PUSHJ P,TTYOUT ;SENT
PUSHJ P,PUTNAM ;NAME OF SUBJOB
CAIN LASU,(SJB) ;LAST IN LAST OUT?
JRST GBUF3 ;YES--PROCEED
MOVEI DATA,"\" ;LOAD A BACKSLASH
PUSHJ P,TTYOUT ;SEND TO TTY
EXCH SJB,LASU ;GET RIGHT SUBJOB
PUSHJ P,PUTNAM ;SEND HIS NAME OUT
EXCH SJB,LASU ;GET OTHER ONE BACK
GBUF3: MOVEI PT1,[ASCIZ/)
/]
PUSHJ P,MOUT ;PRINT THE HEADER
PUSHJ P,TABOU1 ;GIVE A TAB
POP P,DATA ;RESTORE DATA
POPJ P, ;RETURN
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL ERROR MESSAGE SUBROUTINES
QMESG: PUSHJ P,CRLF ;TYPE A CRLF
MOVEI DATA,"?" ;THEN A QM
PUSHJ P,TTYOUT
PUSHJ P,SIXBP ;THEN THE WORD
MOVEI PT1,[ASCIZ/ Subjob /] ;LOAD ADDR OF THAT MESG
PUSHJ P,MOUT ;TYPE ON CONSOLE
JRST PUTNAM ;TYPE ITS NAME
ALLFR: HRRI LASU,0 ;MAKE LASU THE INITIAL VALUE.
JSP PT1,MOUT
ASCIZ /?OPRNAS No active subjobs
/
CMDERR: JSP PT1,MOUT
ASCIZ /?OPRCME Command error
/
NOALL: JSP PT1,MOUT
ASCIZ /?OPRCUA Cannot use all
/
NOBE: JSP PT1,MOUT
ASCIZ /?OPRNSD No such device
/
NOCUR: JSP PT1,MOUT
ASCIZ /?OPRNCS NO CURRENT SUBJOBS
/
NOFREE: HRRI LASU,1000 ;SET NO CUR SUBJOBS FLAG
JSP PT1,MOUT
ASCIZ /?OPRNFS No free subjobs
/
NOINTX: JSP PT1,MOUT
ASCIZ /?OPRCOD cannot open device
/
NOMNE: JSP PT1,MOUT
ASCIZ /?OPRNSM No such mnemonic
/
NOMOR: SKIPG T1
AOJA T1,ONMORE
JSP PT1,MOUT
ASCIZ /?OPRNFP No free PTY's
/
NOTACT: MOVE T1,[SIXBIT /OPRSNA/] ;KEY WORD
PUSHJ P,QMESG
JSP PT1,MOUT
ASCIZ / is not active
/
NOTLOG: JSP PT1,MOUT
ASCIZ /?OPRJNA No job number assigned
/
NORUN: JSP PT1,MOUT
ASCIZ /?OPRCPU No runnable CPU's in specification
/
NOPRIV: JSP PT1,MOUT
ASCIZ /?OPROOC OPR only command.
/
ONLY1: TLNN F,WASCOM
POPJ P,
JSP PT1,MOUT
ASCIZ /[Will only use first argument]
/
OUTBND: JSP PT1,MOUT
ASCIZ /?OPRNSS No such subjob
/
TOOFEW: JSP PT1,MOUT
ASCIZ /?OPRTFA Too few arguments
/
CHKDAE: CAMN T1,[2,,T2]
JRST NODAEM
JSP PT1,MOUT
ASCIZ /?OPRDUE DAEMON UUO Error
/
NODAEM: PJOB T1,
WAKE T1,
POPJ P,
TLO F,SLEEPR
JSP PT1,MOUT
ASCIZ /%OPRDNR DAEMON not running
/
PACF: ASCIZ /[OPRPAF Processing auto command file]
/
ATL5: ASCIZ /%OPRFMM :KSYS has a minimum of 5 min.
/
CNTCON: JSP PT1,MOUT
ASCIZ /?OPRCON Can't continue
/
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL JUNK AREA
SAVACS: EXCH T1,(P)
PUSH P,T2
PUSH P,T3
PUSH P,T4
PUSH P,T5
PUSH P,PT1
PUSHJ P,(T1)
SKIPA
AOS -6(P)
POP P,PT1
POPALL: POP P,T5
POP P,T4
POP P,T3
POP P,T2
POP P,T1
POPJ P,
APOPJ1: AOS (P)
APOPJ: POP P,-1(P)
POPJ P,
XPOPJ1: AOS -1(P)
XPOPJ: POP P,(P)
POPJ P,
CPOPJ1: AOS (P)
CPOPJ: POPJ P,
ZZ==1
USE: REPEAT HGHPTY+1,<
EXP ZZ
ZZ==ZZ_1
>
XLIST ;LITERALS
LIT
LIST
PAGE
;
;-----------------------------------------------------------------------
;
SUBTTL LOW SEGMENT BLOCKS
RELOC ;SWITCH TO LOSEG
LOWBEG:
INTBLK: BLOCK 4 ;BLOCK FOR CORTROL-C TRAP
MAXJOB: BLOCK 1 ;MAX # OF JOBS
LINO: BLOCK 1 ;LINE #
JBCNT: BLOCK 1 ;JOB COUNT
JOBNO: BLOCK 1 ;JOB NUMBER
JIFSEC: BLOCK 1 ;JIFFIES PER SECOND
EAFLAG: BLOCK 1 ;AUTO MODE FLAG
SAVEF: BLOCK 1 ;SAVE AREA
KSYNC: BLOCK 1 ;SYNC FOR KSYS
KSYPTY: BLOCK 1 ;SUBJOB FOR KSYS
SAVKJB: BLOCK 1 ;SAVE GETTAB STUFF FOR KSYS
MYPPN: BLOCK 1 ;PPN OF OPSER
OPRPPN: BLOCK 1 ;PPN OF SYSTEM [OPR]
SAVCH: BLOCK 1 ;SAVED CHARACTOR
KSYFLG: BLOCK 1 ;KSYS MSG FLAG
KSYMSG: BLOCK LINSIZ/5 ;KSYS MESSAGE BUFFER
WARNTM: BLOCK 1 ;@ TO WARNTB
BLK3: BLOCK 3 ;GENERAL OPEN BLOCK
PTY0LN: BLOCK 1 ;LINE NUMBER OF PTY0
DGTCNT: BLOCK 1 ;FOR COUNTING DIGITS
PDL: BLOCK PDLSIZ ;PUSHDOWN LIST
TCONLN: BLOCK 1 ;CTY LINE NUMBER
TTIBUF: BLOCK LINSIZ/5+1 ;INPUT BUFFER
TTIPTR: BLOCK 1 ;POINTER TO IT
SJBFLG: BLOCK HGHPTY+1 ;SUBJOB FLAGS
MNEMON: BLOCK HGHPTY+1 ;FOR MNEMONICS
;***** DO NOT SEPARATE THE FOLLOWING *****
PTIB: BLOCK 3 ;INPUT BUFFER
PTOB: BLOCK 3 ;OUTPUT BUFFER
PTBFS: BLOCK PTYSIZ*2 ;TWO OF THEM
PTBSIZ==.-PTIB
BLOCK <3+3+PTYSIZ*2>*HGHPTY
;***** END OF DO NOT SEPARATE BLOCK *****
IFN FTTLOG,<
FRCLOG: BLOCK 1 ;SET NON-ZERO TO FORCE THINGS INTO THE LOG
LOGNAM: BLOCK 5 ;SYSTEM NAME FROM .GTCNF
LOGDAT: BLOCK 2 ;SYSTEM CREATION DATE FROM .GTCNF
LOGFIL: BLOCK 4 ;REMEMBER LOG FILE SPECS
LOGOB: BLOCK 3 ;BUFFER HEADER
LOGOBB: BLOCK DSKSIZ ;ONE BUFFER
>
IFN FTAUTO,<
AUTIB: BLOCK 3 ;BUFFER HEADER
ATOTIM: BLOCK 1
ATOT1: BLOCK 1
ATOT2: BLOCK 1
ATOT3: BLOCK 1
ATOT4: BLOCK 1
ATOT5: BLOCK 1
>
LOWEND==.-1
END OPSER