Trailing-Edge
-
PDP-10 Archives
-
BB-F494Z-DD_1986
-
10,7/ncptab.mac
There are 21 other files named ncptab.mac in the archive. Click here to see a list.
;DSKT:NCPTAB.MAC[10,6062,NML] 1985-10-10 15:42:28, Edit by APPELLOF
; Allow TOPS-10 to accept node names which start with digits
; (e.g. "2LATE") QAR 868334
;
;DSKT:NCPTAB.MAC[10,6062,NML] 1985-08-09 08:42:28, Edit by APPELLOF
; Change "DDCMP-POINT" etc. to "DDCMP POINT" etc. SPR 10-34758
;
; UPD ID= 330, SNARK:<6.1.NML>NCPTAB.MAC.27, 15-May-85 21:20:50 by MCCOLLUM
; Make "HARDWARE" in "CLEAR NODE x HARDWARE ADDRESS" a VALKEY
; Bump development number to match UPD ID.
;
; UPD ID= 328, SNARK:<6.1.NML>NCPTAB.MAC.26, 13-May-85 12:05:27 by MCCOLLUM
; Add SET EXECUTOR ADDRESS and SET EXECUTOR CIRCUIT commands.
;
; UPD ID= 327, SNARK:<6.1.NML>NCPTAB.MAC.25, 12-May-85 21:01:15 by MCCOLLUM
; Fix bug in NOD$NUMBER that broke NOD$ID
;
; UPD ID= 326, SNARK:<6.1.NML>NCPTAB.MAC.24, 10-May-85 15:42:38 by MCCOLLUM
; Add $ACTION routines to NOD$NUMBER to catch area and node numbers that
; are out of range.
;
; UPD ID= 318, SNARK:<6.1.NML>NCPTAB.MAC.23, 7-May-85 18:05:39 by GLINDELL
; Suppress CREF listing of CM%INV and CM%FW - already defined in MONSYM
;
; UPD ID= 312, SNARK:<6.1.NML>NCPTAB.MAC.22, 6-May-85 21:46:56 by GLINDELL
; Reinstate SHOW SIGNIFICANT but make the keyword invisible.
; While we are at it, make 'FENCE' invisible too.
;
; UPD ID= 311, SNARK:<6.1.NML>NCPTAB.MAC.21, 6-May-85 18:28:33 by MCCOLLUM
; Add CONSOLE LOAD FILE and CONSOLE SECONDARY LOADER to CLEAR NODE x.
;
; UPD ID= 310, SNARK:<6.1.NML>NCPTAB.MAC.20, 3-May-85 13:57:00 by MCCOLLUM
; Add a macro SETFIL to parse an arbitrary string containing valid network
; file name characters. Use this macro to parse file names that are allowed
; in the SET NODE commands (LOAD FILE, SECONDARY/TERTIARY LOADERS, etc.).
;
; NOTE: The correct action here is to use .CMFIL to read a parse-only file
; spec, but because of the peculiarities of OPR/NCPTAB this is not
; possible.
;
; UPD ID= 302, SNARK:<6.1.NML>NCPTAB.MAC.16, 29-Apr-85 13:42:09 by MCCOLLUM
; Remove SHOW SIGNIFICANT
;
; UPD ID= 301, SNARK:<6.1.NML>NCPTAB.MAC.15, 29-Apr-85 10:56:23 by MCCOLLUM
; Add ALL keyword to SET MODULE LOOPER/LOADER
;
; UPD ID= 293, SNARK:<6.1.NML>NCPTAB.MAC.14, 15-Mar-85 13:39:51 by MCCOLLUM
; Add BROADCAST ROUTING TIMER command to SET EXECUTOR.
;
; UPD ID= 251, SNARK:<6.1.NML>NCPTAB.MAC.13, 30-Jan-85 13:31:35 by HALPIN
; Fix bug in SET MODULE LOADER/LOOPER/CONFIGURATOR tables.
;
; UPD ID= 243, SNARK:<6.1.NML>NCPTAB.MAC.12, 23-Jan-85 12:09:17 by HALPIN
; Fix preceding edit. The Parameter Keyword table for CONSOLE SECONDARY
; LOADER and CONSOLE LOAD FILE was not in Alphabetic order.
;
; ******WARNING: ALL TABLES IN THIS FILE MUST BE IN ALPHABETIC ORDER****
;
; UPD ID= 242, SNARK:<6.1.NML>NCPTAB.MAC.11, 21-Jan-85 14:22:46 by HALPIN
; Change the BUFFER SIZE in-line help from <Memory Units> to <Bytes>.
; Add Keywords in the SET NODE tables for the CONSOLE SECONDARY LOADER
; and CONSOLE LOAD FILE.
; Rewrite the LOOP parsing tables correctly.
;
; UPD ID= 223, SNARK:<6.1.NML>NCPTAB.MAC.10, 17-Dec-84 14:00:34 by HALPIN
; Fix SHOW MODULE CONFIGURATOR commands to conform to LCG Network Management
; Spec.
;
; UPD ID= 221, SNARK:<6.1.NML>NCPTAB.MAC.9, 17-Dec-84 11:26:50 by HALPIN
; Fix SET MODULE CONFIGURATOR commands to conform to LCG Network Management
; Spec.
;
; UPD ID= 67, SNARK:<6.1.NML>NCPTAB.MAC.8, 31-Aug-84 11:18:22 by HALPIN
; More updates to parsing tables. Fix some LOGGING commands
;
; UPD ID= 55, SNARK:<6.1.NML>NCPTAB.MAC.7, 7-Jun-84 12:11:37 by HALPIN
; Ident 57
; Conditionalized NOD$NAME macro for TOPS10 & TOPS20. Conditionalized
; the CHKNAM Action routine for TOPS-10 Only.
;
; UPD ID= 54, SNARK:<6.1.NML>NCPTAB.MAC.6, 6-Jun-84 11:36:41 by HALPIN
; Ident 56
; Update tables to include all the new NCP commands from the
; LSG Phase IV DECnet Network Management Function Spec.
; And recover from the big merge.
;
; UPD ID= 45, SNARK:<6.1.NML>NCPTAB.MAC.5, 24-May-84 19:58:34 by GLINDELL
;More merge
; UPD ID= 26, SNARK:<6.1.NML>NCPTAB.MAC.4, 24-May-84 16:07:57 by GLINDELL
;DSKT:NCPTAB.MAC[10,6026,NML702] 10-Feb-84 11:08:21, Edit by DAVENPORT
;
; Change keyword names from $DNxxx to $KNxxx to avoid conflicts with
; DNET. UUO definitions from UUOSYM.R36.
;
;DSKC:NCPTAB.MAC[10,6026,NCPTAB] 19-Jan-84 14:47:10, Edit by DAVENPORT
;
; QAR #125739, 125740 - Change LITBRK break mask to make "?" a break
; character. This allows help to be typed for circuit-ids, line-ids,
; and several other fields. Add help message to NML-10s version of
; $IFILE, $OFILE, and $FILE parser macros.
;
;DSKC:NCPTAB.MAC[10,6026,NCPTAB] 10-Jan-84 11:22:33, Edit by DAVENPORT
;
; QAR # 125523 - Fix EVLIST parse macro to correctly default events to
; ".*" on a carriage return. Requires change to GLXSCN on TOPS-10 to
; implement defaulting of tokens.
;
;DSKC:NCPTAB.MAC[10,6026,NCPTAB] 15-Dec-83 12:55:40, Edit by DAVENPORT
;
; Make NOD$NAME macro only accept node names starting with an alphabetic
; character. To parse node addresses, use the NOD$NUMBER macro.
;
;DSKC:NCPTAB.MAC[10,5665,SOURCE,TOPS10] 20-Oct-83 22:36:38, Edit by GROSSMAN
;
; Take 5.1 release NCPCEX and NCPTAB and make them work for Tops-10.
; Conditionalize searching of MONSYM.
; Convert .DNxxx symbols to $DNxxx symbols to avoid conflict with UUOSYM
; symbols.
; Import definitions of FLDBn. symbols (which aren't defined by GLXMAC).
; Redefine NETOFI, and NETIFI to get around GLXSCN bugs.
; Edit=42
;
;PH4:<HALPIN>NCPTAB.MAC.9 12-Dec-83 17:41:57, Edit by HALPIN
; ident 51
; Moved NCPDEV & NCPMAN symbol definitions so OPR builds
; don't blow up
;
;PH4:<HALPIN>NCPTAB.MAC.6 30-Nov-83 13:50:40, Edit by HALPIN
; ident 50
; SET NODE node-id SERVICE NODE VERSION number
;
;<MCINTEE>NCPTAB.MAC.4, 21-Nov-83 12:43:03, Edit by MCINTEE
; ident 49
; Remove local symbols, as they blow up the build
;
;<MCINTEE>NCPTAB.MAC.9, 9-Nov-83 07:57:05, Edit by MCINTEE
; ident 48
; More version stuff
;
;<MCINTEE>NCPTAB.MAC.4, 3-Nov-83 13:58:56, Edit by MCINTEE
; ident 47
; Leave local symbols in. They are useful.
;
;<MCINTEE>NCPTAB.MAC.3, 1-Nov-83 10:50:07, Edit by MCINTEE
; ident 46
; Fix up version stuff
; Fix bug in NOD$NUMBER
;
;<MCINTEE.WORK>NCPTAB.MAC.2, 9-Aug-83 11:29:21, Edit by MCINTEE
;
; ident 45
; Allow x.y for node number
;
;<MCINTEE.WORK>NCPTAB.MAC.8, 7-Jul-83 12:46:23, Edit by MCINTEE
;
; ident 44
; SHOW ADJACENT NODE qualifier work
;
;<MCINTEE.WORK>NCPTAB.MAC.2, 30-Jun-83 15:19:27, Edit by MCINTEE
; ident 43
; more work on the new qualifiers
;
;<MCINTEE.WORK>NCPTAB.MAC.20, 30-Jun-83 08:42:28, Edit by MCINTEE
; ident 42
; Conflict in names for LOAD command and LOADER module
; Conflict in names for LOOP command and LOOPER module
;
;<MCINTEE.WORK>NCPTAB.MAC.18, 30-Jun-83 08:06:12, Edit by MCINTEE
;
; ident 41
; phase IV updates:
; add modules CONFIGURATOR, CONSOLE, LOADER, LOOPER
; add selector SIGNIFICANT
; add qualifiers ADJACENT NODE node-id, CIRCUIT circuit-id, KNOWN CIRCUITS
; add entities ADJACENT NODES & AREA
;
;<X25-UPDATE>NCPTAB.MAC.6, 21-Jun-83 08:42:18, Edit by MCINTEE
;
; ident 40
; X25 update - correction to SET/ZERO MODULE X25-SERVER.
; No qualifier for X25-SERVER.
;
;NET:<BRANDT.DEVELOPMENT>NCPTAB.MAC.1 13-Dec-82 14:39:55, Edit by BRANDT
;
; ident 39
; Make "SET MODULE X25-SERVER COUNTER TIMER ..." legal (at SET828)
; Make "ZERO MODULE X25-SERVER " legal (at ZER151)
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.3 5-Dec-82 13:39:55, Edit by PECKHAM
;
; ident 38
; Make "CLEAR NODE name NAME" legal (at CLR900).
; Make "ZERO EXECUTOR COUNTERS" legal (at ZER100).
; Make "SHOW LOGGING SUMMARY <sink-node-options>" legal (at SHW510).
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.2 29-Sep-82 17:50:21, Edit by PECKHAM
;
; ident 37
; Re-include the $DEFAULTs that were removed in #36.
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.6 24-Sep-82 14:43:43, Edit by PECKHAM
;
; ident 36
; Fix SET318 keywords to NOT all go to SET319, but to proper prompts.
; Fix TEL140 keywords to NOT all go to TEL150, but to proper prompts.
; Elimate inappropriate $DEFAULTs.
; Set break set for CKT$ID and LINE$ID to LITBRK.
; Add invisible system specific parameter - SET/CLEAR NODE FENCE
;
;<PLATUKIS>NCPTAB.MAC.4 14-Jun-82 14:41:13, Edit by PLATUKIS
;
; ident 35
; change syntax construction of known qualifier keywords.
;
;NET:<BRANDT.DEVELOPMENT>NCPTAB.MAC.3 20-May-82 11:22:49, Edit by BRANDT
;
; Ident 34.
; Change DECSYSTEM-10-20 to DECSYSTEM-1020 to correspond to
; documentation.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.3 26-Mar-82 18:22:49, Edit by VOBA
;
; Ident 33.
; Fix ZERO command syntax not to assign any value to the COUNTERS parameter,
; treat it as a dummy keywords.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.66 25-Mar-82 18:09:01, Edit by VOBA
;
; Ident 32.
; Change the syntax of SHOW MODULE commands not to include default
; qualifier parameters if the user does not specify them.
; Change the syntax of MODULE commands not to use P$ALL for keyword ALL.
; Use a new variable X$ALL with value of 0, instead.
; Change the parsing of all CLEAR parameters to be value keyword. The
; CLEAR qualifier parameters remain regular parameters.
; Add (phantom) parameter NODE TYPE (2600) for CIRCUIT entity commands.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.3 16-Mar-82 08:48:44, Edit by VOBA
;
; Ident 31.
; Make the default information type of SHOW MODULE X25-ACCESS command be
; CHARACTERISTICS, since others do not have any meanings.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.7 15-Mar-82 16:02:30, Edit by VOBA
;
; Ident 30.
; Fix all parameter types of KNOWN qualifiers so that NCPCEX can recognize
; them.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.3 15-Mar-82 10:20:57, Edit by VOBA
;
; Ident 29.
; Fix SHOW LOGGING command to parse the EVENTS qualifier correctly.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.7 12-Mar-82 13:49:09, Edit by VOBA
;
; Ident 28.
; Rewrite the syntax of SHOW MODULE commands to include the qualifier
; parameters at end of commands.
; Remove all references to TO parameter in all SHOW commands.
;
;NET:<GROSSMAN.NML-SOURCES>NCPTAB.MAC.3 8-Mar-82 15:42:21, Edit by GROSSMAN
;
; Ident 27.
; Fix Tops-10 file break set so that dashes are now illegal...
;
;NET:<BRANDT.DEVELOPMENT>NCPTAB.MAC.2 5-Mar-82 12:10:00, Edit by BRANDT
;
; Ident 26.
; Disable alternate TO output_file for SHOW and LIST command.
;
;NET:<BRANDT.DEVELOPMENT>NCPTAB.MAC.2 4-Mar-82 17:01:00, Edit by BRANDT
;
; Ident 25.
; Merge NCPTAB.FTR into NCPTAB.MAC.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.2 4-Mar-82 16:55:00, Edit by VOBA
;
; Ident 24.
; Change SHOW syntax of MODULE entity to use macro PARKEY instead of NCPKEY.
;
;NET:<DECNET20-V3P1.BASELEVEL-2.SOURCES>NCPTAB.MAC.15 3-Mar-82 12:30:13, Edit by VOBA
;
; Ident 23.
; Change MODULE X25-ACCESS parameter numbers to reflect proposed change
; to the architecture specification.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.7 1-Mar-82 14:41:56, Edit by VOBA
;
; Ident 22.
; Change break mask HEXBRK to recognize hexadecimal digits in lower case.
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.2 1-Mar-82 08:00:12, Edit by PECKHAM
;
; Change SHOW LOGGING entity to use VALKEY instead of NCPKEY to be consistent.
;
;NET:<GROSSMAN.NML-SOURCES>NCPTAB.MAC.3 25-Feb-82 20:26:33, Edit by GROSSMAN
;
; Add a line that got lost between KL1026 and here. (Its at T10BRK:)
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.3 24-Feb-82 14:30:40, Edit by PECKHAM
; for VOBA
; Change help file extensions to .MEM
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.2 24-Feb-82 10:01:09, Edit by PECKHAM
;
; PURGE variables FTJSYS, FTUUOS.
;
;NET:<GROSSMAN.NML-SOURCES>NCPTAB.MAC.3 24-Feb-82 08:44:13, Edit by GROSSMAN
;
; Redefine $FILE, $IFILE, $OFILE as $FIELD with a TOPS10 filespec break set.
; This will cause OPR to pass the (possibly illegal) filespec to NML as an
; ASCII string, instead of parsed SIXBIT tokens. This will save NML proper the
; trouble of converting that back into ASCII, and also avoid several GLXCMD
; bugs dealing with filespecs (Tops-10 only).
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.3 19-Feb-82 14:31:36, Edit by PECKHAM
;
; Ident 21.
; Fix SINK qualifier requirements for SHOW LOGGING parameter parsing.
;
;NET:<VOBA.NML.DEVELOPMENT>NCPTAB.MAC.5 17-Feb-82 08:07:53, Edit by VOBA
;
; Ident 20.
; Add TOPS10 condition to the HELP file specification so TOPS-10 can parse
; HELP file name.
;
;NET:<VOBA.NML>NCPTAB.MAC.3 30-Jan-82 11:50:45, Edit by VOBA
;
; Ident 19.
; Remove references of .RETT in the NCPHLP action routine.
;
;NET:<VOBA.NML>NCPTAB.MAC.45 25-Jan-82 16:15:34, Edit by VOBA
;
; Ident 18.
; Fix syntax to parse event list. Fix syntax to parse SET & CLEAR LOGGING.
; Remove ABORT command from syntax table permanently.
; Change TELL command table not to include itself in the command.
;
;NET:<PECKHAM.DEVELOPMENT>NCPTAB.MAC.12 22-Jan-82 06:46:21, Edit by PECKHAM
;
; Ident 17.
; Remove ABORT command.
; Enable all X.25 parameters permanently.
; Add DMP parameters and clean up for NM V3.0.0
;
;NET:<GUNN.DEVELOPMENT>NCP3TB.MAC.6 18-Jan-82 18:18:46, Edit by GUNN
;
; Ident 16. (Decimal)
; Parse NODE IDENTIFICATION parameter and others as quoted strings
; instead of or in addition to fields.
;
;NET:<BRANDT.DEVELOP>NCP3TB.MAC.1 13-Jan-82 16:44:10, Edit by BRANDT
;
; Ident 15 (octal) (more or less!)
; Turn on "no-parse" bit for nodes.
; Update NCPVER to get in sync with Ident numbers.
;
;NET:<GUNN.DEVELOPMENT>NCP3TB.MAC.2 12-Jan-82 14:14:11, Edit by GUNN
;
; Update copyright date to 1982.
; Remove .TEXT directive.
; Fix DEBUG conditionals to check for value if DEBUG is defined.
;
;NET:<VOBA.NML>NCP3TB.MAC.122 11-Jan-82 10:01:17, Edit by VOBA
;
; Implement full NCP command syntax table.
;
;NET:<DECNET20-V3P1.BASELEVEL-2.TOPS20>NCP3TB.MAC.2 20-Aug-81 09:53:59, Edit by GUNN
;
; Put C$PMAX, C$PRCL, & C$MRCL under X.25 conditional.
;
;NET:<DECNET20-V3P1.NML>NCP3TB.MAC.2 8-Aug-81 16:49:28, Edit by GUNN
;
; Removed space " " from break mask of network file specification. Can't
; parse more than one parameter on a single command. Syntax of remote
; file spec changed to 'KL2102"OPERATOR;PASSWORD;ACCOUNT"::DIR:NAME.EXT'
; as a bypass.
;
;NET:<DECNET20-V3P1.NCP.SOURCES>NCP3TB.MAC.29 18-Jul-81 13:37:04, Edit by GUNN
;
; Added break mask for network style file specifications.
; Changed PRTVER macro to print out version in nice format.
; Fixed VALKEY and PARKEY macros to only print out warning only
; if symbol is being redefined with a different value.
;
;NET:<DECNET20-V3P1.NCP.SOURCES>NCP3TB.MAC.11 12-May-81 16:16:00, Edit by GUNN
;
; Change DUMP ADDRESS and DUMP COUNT to decimal radix input.
;
;NET:<DECNET20-V3P1.NCP.SOURCES>NCP3TB.MAC.10 11-May-81 17:21:01, Edit by GUNN
;
; Fix break mask for SERVICE PASSWORD.
;
;NET:<DECNET20-V3P1.NCP.SOURCES>NCP3TB.MAC.8 11-May-81 16:50:49, Edit by GUNN
;
; Make SUMMARY be default for SHOW commands.
;
;NET:<DECNET20-V3P1.NCP.SOURCES>NCP3TB.MAC.7 11-May-81 10:35:55, Edit by GUNN
;
; Changed SERVICE DEVICE table to reflect MOP V2.1 specification.
;
;NET:<DECNET20-V3P1.NCP.SOURCES>NCP3TB.MAC.6 9-Apr-81 10:44:03, Edit by GUNN
;
; Began change of LOAD command syntax to allow only one of either ADDRESS or
; NAME parameters for NODE entity option, left commented out.
; Removed UNIVERSAL TIME parameter, not settable by NCP.
; Made SERVICE PASSWORD field accept only hexadecimal digit characters.
;
;NET:<DECNET20-V3P1.BASELEVEL-2.SOURCES>NCP3TB.MAC.15 9-Feb-81 14:48:59, Edit by GUNN
;
; Changed all node address to be always be input in decimal.
;
; NCPTAB.MAC - NCP/OPR Command Parsing Tables NCP V3.0
DEBUG==0 ;***** - Build a debug version
FTX25==1 ;Assemble with X.25 features
.CLIST==0 ;Don't print keyword code assignments
; at beginning of listing
IFNDEF DEBUG, <TITLE NCPTAB - DECnet-10/20 NCP Command Definitions>
IFDEF DEBUG, <
IFN DEBUG, <TITLE NCP3TB - DECnet-10/20 NCP Command Definitions>
IFE DEBUG, <TITLE NCPTAB - DECnet-10/20 NCP Command Definitions>>
SALL ; Keep listing clean looking
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
; OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976,1977,1978,1979,1980,1981,1982,1986.
;ALL RIGHTS RESERVED.
;++
; FACILITY: DECnet-10/20 V3.0 Network Control Program (NCP)
;
; FUNCTIONAL DESCRIPTION:
;
; This module provides the command parsing tables used by the
; GALAXY Operator Interface Program, OPR, on the DECsystem-10
; and DECSYSTEM-20 DECnet systems for Network Management commands.
;
; ENVIRONMENT: User mode as part of OPR GALAXY system with GLXLIB.
;
; AUTHOR: Dale C. Gunn, CREATION DATE: 13-JUN-80
;
; MODIFIED BY:
;
; Dale C. Gunn, 13-JUN-80: VERSION 03
; 01 - Create Version 3.0 source module from Version 2.0 Base Level
;
; Dale C. Gunn, 12-AUG-80: VERSION 03
; 02 - Update to reflect X.25 Network Management Spec of 26 JUN 80
; 03 - Miscellaneous corrections
; 04 - Change name of KEYTAB macro to NCPKEY to avoid conflict with
; the GALAXY macro or same name, and allow it to be called from
; within NCPKEY.
; 05 - Change keyword codes for node parameters be identical to the
; corresponding Network Management Architecture parameter number.
; 06 - Add PARKEY macro to define symbols for parameter numbers.
; 07 - Put X.25 specific commands and parameters under conditional.
;
; Dale C. Gunn, 24-OCT-80: VERSION 03
; 08 - Update to reflect X.25 Network Management Spec (V2.1) of 21 AUG 80
; 09 - Added default strings where appropriate
; 10 - Miscellaneous and various coding errors fixed
;
; Dale C. Gunn, 30-JAN-81: VERSION 03
; 11 - Add access control syntax to LOOP NODE command
; 12 - Add break mask to access control fields to allow
; all printing characters
; 13 - Changed parse of node address to decimal radix
;
;--
SUBTTL Declarations
;
; INCLUDE FILES:
;
SEARCH GLXMAC ; GALAXY Universal Definitions
SEARCH ORNMAC ; OPR/ORION Universal Definitions
PROLOG NCPTAB ; Init Galaxy macros and such
TOPS20 <SEARCH MONSYM> ; Monitor Universal Symbols
SEARCH MACSYM ; System Wide Macro Definitions
.BCOPY
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1976,1986. ALL RIGHTS RESERVED.
\;END COPYRIGHT MACRO
.ECOPY
SUBTTL REGISTER DEFINITIONS
S1=:1
S2=:2
T1=:3
T2=:4
SUBTTL VERSION INFORMATION
NCPMAN==:^D39 ;Maintenance edit number
NCPDEV==:^D329 ;Development edit number (ident # in edit history)
NCPVER==:^D4 ;Major version number
NCPMIN==:^D0 ;Minor version number
NCPWHO==:^D0 ;Customer version number
; PRTVER (EDT) - print out GLXMAC version number in listing
DEFINE PRTVER (EDT), <
GLXNCP==:<EDT>
IF1 <
PRINTX NCPTAB - Assembled using GLXMAC version: 'EDT>>
; NCPVRX (VERSION,MINOR,EDIT,WHO) - Make NCP Version
; AND print it out in the listing.
DEFINE NCPVRX (MAJ,MIN,EDT,WHO), <
NCPVRS==:<BYTE(3)WHO(9)MAJ(6)MIN(18)EDT>
IF1 <
PRINTX NCPTAB - Assembling NCP version: 'MAJ'.'MIN('EDT)>>
;Tell the rest of GALAXY about the version number (Defines NCPEDT)
TOPS20< VERSIN (NCP)>
TOPS10< NCPEDT==<NCPDEV&777>*1000+<NCPMAN&777>>
;Invoke the macros.
NCPVRX (\NCPVER,\NCPMIN,\NCPEDT,\NCPWHO) ; Make & print version number
TOPS10< PRTVER (\GLXVER,\GLXMIN,\GLXEDT,\GLXWHO)>; Print GLXMAC version in listing
SUBTTL Macro Definitions for Commonly Used Syntax
;
; MACROS:
;
; CKT$ID (next-pdb) - Parse canonical Circuit Id
DEFINE CKT$ID (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Circuit Id>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)>
IFNB <LIST>, <$FIELD (NEXT,<Circuit Id>,<$FLAGS(CM%BRK),$BREAK(LITBRK),LIST>)>
> ; End of CKT$ID Definition
; LINE$ID (next-pdb) - Parse canonical Line Id
DEFINE LINE$ID (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Line Id>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)>
IFNB <LIST>, <$FIELD (NEXT,<Line Id>,<$FLAGS(CM%BRK),$BREAK(LITBRK),LIST>)>
> ; End of LINE$ID Definition
; NOD$NAME (next-pdb, alternate-pdb) - Parse canonical Node Name
DEFINE NOD$NAME (NEXT,LIST), <
IFB <LIST>,<$NODNM (NEXT,<Node Name>,<$FLAGS(CM%NSF+CM%PO),$ACTION(CHKNAM)>)>
IFNB <LIST>,<$NODNM (NEXT,<Node Name>,<$FLAGS(CM%NSF+CM%PO),$ACTION(CHKNAM),LIST>)>
> ; End of NOD$NAME Definition
; NOD$NUMBER (next-pdb, alternate-pdb, next-pdb-default)
; Parse canonical node number
; **NOTE** ALTPDB is the address of the alternate PDB, not the $ALTERNATE macro
DEFINE NOD$NUMBER (NEXT,ALTPDB,NDEFLT,%A,%B), <
IFNB <ALTPDB>,<
$NUMBER (%A,<^D10>,<Area Number or Decimal Node Address>,<$ACTION(CHKANM),$ALTERNATE(ALTPDB)>)
>;;END OF IFNB ALTPDB
IFB <ALTPDB>,<
$NUMBER (%A,<^D10>,<Area Number or Decimal Node Address>,<$ACTION(CHKANM)>)
>;;END OF IFB ALTPDB
IFNB <NDEFLT>,<
%A: $TOKEN (%B,<.>,<$DEFAULT(NDEFLT),$ALTERNATE(NEXT),$ACTION(CHKARN)>)
>;;END OF IFNB NDEFLT
IFB <NDEFLT>,<
%A: $TOKEN (%B,<.>,<$ALTERNATE(NEXT),$ACTION(CHKARN)>)
>;;END OF IFB NDEFLT
%B: $NUMBER (NEXT,<^D10>,<Decimal Node Address>,$ACTION(CHKNNM))
IF2 <PURGE %A,%B> ; Remove from symbol table
> ; End of NOD$NUMBER Definition
; NOD$ID (next-pdb, alternate-pdb, next-pdb-default)
; Parse canonical node identifier
DEFINE NOD$ID (NEXT,LIST,NDEFLT,%A), <
NOD$NUMBER (NEXT,%A,NDEFLT)
%A: NOD$NAME (NEXT,LIST)
IF2 <PURGE %A> ; Remove from symbol table
> ; End of NOD$ID Definition
; NI$ADDRESS (next-pdb) - Parse NI address
DEFINE NI$ADDRESS (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<NI address>,<$FLAGS(CM%BRK),$BREAK(ETHBRK)>)>
IFNB <LIST>, <$FIELD (NEXT,<NI address>,<$FLAGS(CM%BRK),$BREAK(ETHBRK),LIST>)>
> ; End of NI$ADDRESS Definition
; SVC$PASSWORD (next-pdb) - Parse canonical service password
DEFINE SVC$PASSWORD (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Hexadecimal Boot Password>,<$FLAGS(CM%BRK),$BREAK(HEXBRK)>)>
IFNB <LIST>, <$FIELD (NEXT,<Hexadecimal Boot Password>,<$FLAGS(CM%BRK),$BREAK(HEXBRK),LIST>)>
> ; End of SVC$PASSWORD Definition
; EVLIST (next-pdb) - Parse event list
DEFINE EVLIST (NEXT,%A,%B,%C,%D,%E,%F,%G), <
$DIGIT (%A,<^D10>,<Event Class>)
%A: $TOKEN (%B,<.>,<$DEFAULT(<.>)>)
%B: $DIGIT (%C,<^D10>,<Event Type>,<$DEFAULT(<*>),$ALTERNATE(%G)>)
%C: $TOKEN (%D,<->,<$HELP(<"-" To Specify Type Range>),$ALTERNATE(%E)>)
%D: $DIGIT (%E,<^D10>,<Ending Type Range>)
%E: $COMMA (%F,<$HELP(<"," To Specify Additional Type>),$ALTERNATE(NEXT)>)
%F: $DIGIT (%C,<^D10>,<Event Type>)
%G: $TOKEN (NEXT,<*>,<$HELP(<"*" To Specify All Types Of This Class>)>)
IF2 <PURGE %A,%B,%C,%D,%E,%F,%G>
> ; End of EVLIST Definition
; CHANNELS (next-pdb) - Parse list of channels
DEFINE CHANNELS (NEXT,%A,%B,%C,%D), <
%A: $DIGIT (%B,<^D10>,<List Of Channel Ranges "n-m" or Single Channels>)
%B: $TOKEN (%C,<->,<$HELP(<"-" To Specify Channel Range>),$ALTERNATE(%D)>)
%C: $NUMBER (%D,<^D10>,<Ending Channel Range>)
%D: $COMMA (%A,<$HELP(<"," To Specify Additional Channel>),$ALTERNATE(NEXT)>)
IF2 <PURGE %A,%B,%C,%D>
> ; End of CHANNELS Definition
; OBJECT$ID (next-pdb) - Parse object name/number identification
DEFINE OBJECT$ID (NEXT,%A,%B), <
$NUMBER (NEXT,<^D10>,<Object Identifier Number>,<$ALTERNATE(%A)>)
%A: $QUOTE (NEXT,<Quoted Numeric Object Identifier Name>,<$ALTERNATE(%B)>)
%B: $FIELD (NEXT,<Object Identifier Name>)
IF2 <PURGE %A,%B,%C>
> ; End of OBJECT$ID Definition
; NET$NAME (next-pdb) - Parse canonical network name
DEFINE NET$NAME (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Network Name>)>
IFNB <LIST>, <$FIELD (NEXT,<Network Name>,LIST)>
> ; End of NET$NAME Definition
; DTE$ADR (next-pdb) - Parse canonical DTE address
DEFINE DTE$ADR (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Decimal DTE Address>,<$FLAGS(CM%BRK),$BREAK(DECBRK)>)>
IFNB <LIST>, <$FIELD (NEXT,<Decimal DTE Address>,<$FLAGS(CM%BRK),$BREAK(DECBRK)>,LIST)>
> ; End of DTE$ADR Definition
; CALL$NUMBER (next-pdb) - Parse canonical X25 DTE address
DEFINE CALL$NUMBER (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Full Remote DTE Address>,<$FLAGS(CM%BRK),$BREAK(CALBRK)>)>
IFNB <LIST>, <$FIELD (NEXT,<Full Remote DTE Address>,<$FLAGS(CM%BRK),$BREAK(CALBRK)>,LIST)>
> ; End of CALL$NUMBER Definition
; DEST$NAME (next-pdb) - Parse canonical X25 destination name
DEFINE DEST$NAME (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Destination Name String>)>
IFNB <LIST>, <$FIELD (NEXT,<Destination Name String>,LIST)>
> ; End of DEST$NAME Definition
; SUB$ADDR (next-pdb) - Parse canonical X25 subaddress range
DEFINE SUB$ADDR (NEXT,%A,%B), <
$DIGIT (%A,<^D10>,<Subaddress Range "n-m">)
%A: $TOKEN (%B,<->,<$HELP(<"-" To Specify Subaddress Range>),$DEFAULT(<->)>)
%B: $NUMBER (NEXT,<^D10>,<Ending Subaddress>)
IF2 <PURGE %A,%B> ; Remove from symbol table
> ; End of SUB$ADDR Definition
; DEV$ID (next-pdb) - Parse canonical device identifier
DEFINE DEV$ID (NEXT,LIST), <
IFB <LIST>, <$FIELD (NEXT,<Device Specification "ddd-c-u">)>
IFNB <LIST>, <$FIELD (NEXT,<Device Specification "ddd-c-u">,LIST)>
> ; End of DEV$ID Definition
; STR$ID (NEXT,LIST) - Parse standard transparent string argument
DEFINE STR$ID (NEXT,HELP,%A), <
IFB <HELP>,<$QUOTE (NEXT,<Quoted or Unquoted String>,<$ALTERNATE(%A)>)>
IFNB <HELP>,<$QUOTE (NEXT,<Quoted or Unquoted HELP>,<$ALTERNATE(%A)>)>
%A: $FIELD (NEXT,,<$FLAGS(CM%SDH)>)
IF2 <PURGE %A>>
; DEV$TYPE (NEXT,LIST) - Parse service device type
DEFINE DEV$TYPE (NEXT,%A), <
IFB <LIST>, <$KEYDSP (%A)>
IFNB <LIST>, <$KEYDSP (%A,LIST)>
%A: $STAB
VALKEY (NEXT,N$TCI,^D7,CI)
VALKEY (NEXT,N$TCNA,^D3,CNA)
VALKEY (NEXT,N$TDA,^D8,DA)
VALKEY (NEXT,N$TDL,^D4,DL)
VALKEY (NEXT,N$TDLV,^D16,DLV)
VALKEY (NEXT,N$TDMC,^D12,DMC)
VALKEY (NEXT,N$TDMF,^D38,DMF)
VALKEY (NEXT,N$TDMP,^D18,DMP)
VALKEY (NEXT,N$TDMR,^D32,DMR)
VALKEY (NEXT,N$TDMV,^D34,DMV)
VALKEY (NEXT,N$TDN,^D14,DN)
VALKEY (NEXT,N$TDP,^D0,DP)
VALKEY (NEXT,N$TDPV,^D36,DPV)
VALKEY (NEXT,N$TDQ,^D6,DQ)
VALKEY (NEXT,N$TDTE,^D20,DTE)
VALKEY (NEXT,N$TDU,^D2,DU)
VALKEY (NEXT,N$TDUP,^D10,DUP)
VALKEY (NEXT,N$TDV,^D22,DV)
VALKEY (NEXT,N$TDZ,^D24,DZ)
VALKEY (NEXT,N$TKDP,^D28,KDP)
VALKEY (NEXT,N$TKDZ,^D30,KDZ)
VALKEY (NEXT,N$TKL,^D32,KL)
VALKEY (NEXT,N$TKMY,^D42,KMY)
VALKEY (NEXT,N$TKMX,^D44,KMX)
VALKEY (NEXT,N$TNI,^D15,NI)
VALKEY (NEXT,N$TPCL,^D9,PCL)
VALKEY (NEXT,N$TQNA,^D5,QNA)
VALKEY (NEXT,N$TUNA,^D1,UNA)
$ETAB
IF2 <PURGE %A>
> ; End of DEV$TYPE Definition
; PRTVAL (SYM,CODE,KEY) - Print out symbols, values, and keywords
DEFINE PRTVAL (SYM,CODE,KEY), <
PRINTX 'SYM = 'CODE ('KEY)>
; WARNING (SYM,CODE) - Print out warning for duplicated symbols with different
; values
DEFINE WARNING (SYM,VAL,CODE), <
IFDIF <'VAL><'CODE>, <
PRINTX WARNING - 'SYM has been defined as 'VAL, now as 'CODE>>
; NCPKEY (next-pdb,keyword,symbol-suffix [,flags]) - Make keyword table entry
; for an NCP command and define a symbol to represent the keyword value
..Z==0
IF2 <PURGE ..Z>
DEFINE NCPKEY (NXT,CODE,KEY,FLAGS), <
IFNDEF $KN'CODE,<
..Z==..Z+1 ; Bump keyword code counter
$KN'CODE==:..Z> ; Assign value to global symbol
IFN .CLIST, <PRINTX <$KN'CODE = 'KEY>>
IFB <FLAGS>, <DSPTAB (NXT,$KN'CODE,KEY)>
IFNB <FLAGS>, <DSPTAB (NXT,$KN'CODE,KEY,FLAGS)>
> ; End of NCPKEY Macro Definition
; PARKEY (next-pdb,symbol,value,keyword [,flags]) - Make keyword table entry
; for an NML parameter and define a symbol to represent
; the keyword value
DEFINE PARKEY (NXT,SYM,CODE,KEY,FLAGS), <
IF1 <IFNB <CODE>, <
IFN .CLIST, <PRTVAL (SYM,\<CODE>,KEY)>
IFDEF SYM, <WARNING ('SYM,\<SYM>,\<CODE>)>
IFNDEF SYM, <SYM==:CODE>>>
IFB <FLAGS>, <DSPTAB (NXT,SYM,KEY)>
IFNB <FLAGS>, <DSPTAB (NXT,SYM,KEY,FLAGS)>
> ; End of PARKEY Macro Definition
; VALKEY (next-pdb,symbol,value,keyword [,flags]) - Make keyword table entry
; for an NML keyword code value and define a symbol to represent
; the keyword value
DEFINE VALKEY (NXT,SYM,CODE,KEY,FLAGS), <
IF1 <IFNB <CODE>, <
IFN .CLIST, <PRTVAL (SYM,\<VAL$KY!CODE>,KEY)>
IFDEF SYM, <WARNING ('SYM,\<SYM>,\<CODE>)>
IFNDEF SYM, <SYM==CODE>>>
IFB <FLAGS>, <DSPTAB (NXT,<VAL$KY!SYM>,KEY)> ; Indicate parameter value
IFNB <FLAGS>, <DSPTAB (NXT,<VAL$KY!SYM>,KEY,FLAGS)>
> ; End of VALKEY macro definition
; KNWKEY (next-pdb,symbol,value,keyword [,flags]) - Make keyword table entry
; for an NML known qualifier keyword code and define a symbol to
; represent the keyword value
DEFINE KNWKEY (NXT,SYM,CODE,KEY,FLAGS), <
IF1 <IFNB <CODE>, <
IFN .CLIST, <PRTVAL (SYM,\<KNW$KY!CODE>,KEY)>
IFDEF SYM, <WARNING ('SYM,\<SYM>,\<CODE>)>
IFNDEF SYM, <SYM==CODE>>>
IFB <FLAGS>, <DSPTAB (NXT,<KNW$KY!SYM>,KEY)>
IFNB <FLAGS>, <DSPTAB (NXT,<KNW$KY!SYM>,KEY,FLAGS)>
> ; End of KNWKEY macro definition
; The following redefinitions are done so that a Tops-10 file spec can be
; passed to NML as an ASCII string.
TOPS10 <
;DEFINE STANDARD BREAK MASKS (NORMALLY COMES FROM MONSYM)
BRINI. ;INITIALIZE BREAK MASK FOR STANDARD FIELD
BRKCH. (0,37) ;ALL CONTROL CHARACTERS
BRKCH. (40,54) ;SPACE THROUGH COMMA
BRKCH. (56,57) ;DOT AND SLASH
BRKCH. (72,77) ;COLON THROUGH QUESTION MARK
BRKCH. (100) ;ATSIGN
BRKCH. (133,140) ;OPEN BRACKET THROUGH ACCENT GRAVE
BRKCH. (173,177) ;CLOSE BRACKET THROUGH TILDE
FLDB0.==W0. ;STANDARD FIELD BREAK MASK
FLDB1.==W1.
FLDB2.==W2.
FLDB3.==W3.
;KEYWORD BREAK SET. SAME AS STANDARD FIELD FOR NOW
KEYB0.==FLDB0.
KEYB1.==FLDB1.
KEYB2.==FLDB2.
KEYB3.==FLDB3.
;T10BRK: BRMSK. (FLDB0.,<FLDB1.&<^-<1_^D33!1_^D23>>>,FLDB2.,FLDB3.,<:.[]>)
T10BRK: BRMSK. (FLDB0.,FLDB1.,FLDB2.,FLDB3.,<:.[],>,-)
IF1, < DEFINE $IFILE (NXT,HELP<input filespec>,ARGLST) <
$FIELD (<NXT>,<HELP>,<$BREAK (T10BRK),ARGLST>)>
DEFINE $OFILE (NXT,HELP<output filespec>,ARGLST) <
$FIELD (<NXT>,<HELP>,<$BREAK (T10BRK),ARGLST>)>
DEFINE $FILE (NXT,HELP<filespec>,ARGLST) <
$FIELD (<NXT>,<HELP>,<$BREAK (T10BRK),ARGLST>)>
DEFINE NETOFI (NXT),<$OFILE(NXT)>
DEFINE NETIFI (NXT),<$IFILE(NXT)>
> ; End of IF1
> ; End of TOPS10
; NETIFI (next-pdb) - Parse network input file name with optional data in
; the format of node"user account password"::input-file-spec
TOPS20 <
DEFINE NETIFI (NEXT,%A,%B,%C,%D,%E,%F), <
$IFILE (NEXT,<Local Input File Name>,<$ALTERNATE(%A)>)
%A: $NODNM (%E,<Remote File Name>,<$FLAGS(CM%PO),$ALTERNATE(%B)>)
%B: $FIELD (%C,<>,<$FLAGS(CM%SDH+CM%BRK),$BREAK(NODBRK)>)
%C: $QUOTE (%D,<Optional "user password [account]">,<$ALTERNATE(%D)>)
%D: $TOKEN (%E,<::>,<$DEFAULT(<::>),$HELP(<"::" To Terminate Node Name>)>)
%E: $IFILE (NEXT,<Remote File Name>,<$ALTERNATE(%F)>)
%F: $FIELD (NEXT,<>,<$FLAGS(CM%SDH+CM%BRK),$BREAK(LITBRK)>)
IF2 <PURGE %A,%B,%C,%D,%E,%F>
> ; End of NETIFI macro definition
; NETOFI (next-pdb) - Parse network output file name with optional data in
; the format of node"user account password"::output-file-spec
DEFINE NETOFI (NEXT,%A,%B,%C,%D,%E,%F), <
$NODNM (%D,<Remote File Name>,<$FLAGS(CM%PO),$ALTERNATE(%A)>)
%A: $FIELD (%B,<>,<$FLAGS(CM%SDH+CM%BRK),$BREAK(NODBRK),$ALTERNATE(%F)>)
%B: $QUOTE (%C,<Optional "user password [account]">,<$ALTERNATE(%C)>)
%C: $TOKEN (%D,<::>,<$DEFAULT(<::>),$HELP(<"::" To Terminate Node Name>)>)
%D: $OFILE (NEXT,<Remote File Name>,<$ALTERNATE(%E)>)
%E: $FIELD (NEXT,<>,<$FLAGS(CM%SDH+CM%BRK),$BREAK(LITBRK)>)
%F: $OFILE (NEXT,<Local Output File Name>)
IF2 <PURGE %A,%B,%C,%D,%E,%F>
> ; End of NETOFI macro definition
>; END TOPS20
; SETFIL (next-pdb) - Parse field for SET FILE commands
DEFINE SETFIL(NEXT), <
IFB <LIST>, <$FIELD (NEXT,<File name>,<$FLAGS(CM%BRK),$BREAK(SETBRK)>)>
IFNB <LIST>, <$FIELD (NEXT,<File name>,<$FLAGS(CM%BRK),$BREAK(SETBRK),LIST>)>
> ; End of SETFIL Definition
SUBTTL Local Symbols
;
; EQUATED SYMBOLS:
;
VAL$KY==:1B18 ; Flag to indicate keyword is a parameter value
KNW$KY==:1B19 ; Flag to indicate keyword is a qualifier
IFNDEF FTX25, <FTX25==0> ; Default to exclude MODULE X25 commands
IFNDEF .CLIST, <.CLIST==0> ; Default to prevent printing keyword symbol
; assignments at front of listing
;
; GLOBAL SYMBOLS:
;
IF2 <ASUPPRESS>
DEFINE PRTEDT (MAN,DEV) <
PRINTX NCP MAINTENANCE EDIT NUMBER 'MAN'
PRINTX NCP DEVELOPMENT EDIT NUMBER 'DEV'
>
TOPS20 <IF2 <PRTEDT (\NCPMAN,\NCPDEV)>>
IFDEF DEBUG, <
IFN DEBUG, <INTERN NCP3TB>
IFE DEBUG, <INTERN NCPTAB>>
IFNDEF DEBUG, <INTERN NCPTAB>
SUBTTL Local Storage
;
; OWN STORAGE:
;
; OPRPAR Argument Block
IFDEF DEBUG, <
IFN DEBUG, <NCP3TB:>
IFE DEBUG, <NCPTAB:>>
IFNDEF DEBUG, <NCPTAB:> ; Externally referenced by OPR
EXP 2 ; Length
EXP ININCP ; Address of $INIT PDB
EXP NCPFDB ; Address of Top Level $KEY PDB
NCPGVN: TOPS10 <EXP GLXEDT> ; Version of GLXMAC
TOPS20 <EXP GMCEDT> ; Version number of GLXMAC
NCPVRN: EXP NCPVRS ; Version number of NCP
;
; Common Break Mask Tables
;
ETHBRK: BRMSK. (-1,-1,-1,-1,0123456789ABCDEFabcdef-) ; Hexadecimal field
HEXBRK: BRMSK. (-1,-1,-1,-1,0123456789ABCDEFabcdef) ; Hexadecimal field
DECBRK: BRMSK. (-1,-1,-1,-1,0123456789) ; Decimal field
CALBRK: BRMSK. (-1,-1,-1,-1,<*0123456789>) ; Call number field
NODBRK: BRMSK. (FLDB0.,FLDB1.,FLDB2.,FLDB3.,<_>,<->) ; Node name field
DOTBRK: BRMSK. (KEYB0.,KEYB1.,KEYB2.,KEYB3.,<.>) ; Keyword w/o dot as a break character
SETBRK: BRMSK. (FLDB0.,<FLDB1.&<^-<1_^D33!1_^D23>>>,FLDB2.,FLDB3.,[ ]<>:-._) ;Break mask for SETFIL
; Mask for all printing characters. NOTE: Special handling is required for
; double quote (") and comma (,) characters. Two bits which were shifted left
; 33 and 23 positions in the second field are set to indicate (") and (,),
; respectively.
; BRMSK. calls UNBRK. with double quote as a delimiter which prevents use of
; that character in the string argument to this macro. Since both sets of
; quoting characters are used in the string comma must be specially handled
; lest it would be interpreted as an argument delimeter.
LITBRK: BRMSK. (FLDB0.,<FLDB1.&<^-<1_^D33!1_^D23>>>,FLDB2.,FLDB3.,!#$%&'()*+-./:;<=>@[\]^_`{|}~)
SUBTTL Parser Action Routines
; $ACTION routine used to check for a valid node name returned
; by the $NODNM parse macro. It filters out node addresses.
;******TOPS-10 ONLY*******
TOPS10 <
CHKNAM: MOVE 0,CR.RES(S2) ; Get node name.
TLNE 0,770000 ; Is there a leading character?
PJRST [SETO 0, ; Yes, return TRUE
POPJ P,] ; ...
MOVEI S2,[ASCIZ /Node name must start with an alphabetic character/]
SETZ 0, ; Return FALSE with error message in S2
POPJ P, ; ...
> ; End of TOPS-10 Conditional
; $ACTION routine to check for a valid node number for the NOD$NUMBER
; macro. Note that at this time we don't know if this is an area number or
; a node number. We'll check to see that it's a valid node number now and
; if it turns out to be an area number, we'll catch it in CHKARN.
;
CHKANM: SKIPL T1,CR.RES(S2) ; Get number and check range
CAIL T1,^D1024 ; must be between 0 and 1023 inclusive
JRST [ MOVEI S2,[ASCIZ/Area or node number out of range/] ; Error text
SETZ 0, ; Flag error
POPJ P, ] ; And return false
MOVEM T1,AREANM ; Save in case it was area number
POPJ P, ; Return
AREANM: BLOCK 1
; $ACTION routine to verify that the area number we got in CHKANM is valid.
; We have already checked to see if it is between 0 and 1023. Now we will
; verify that it was between 0 and 63.
;
CHKARN: MOVE T1,AREANM ; Get area number from CHKANM
CAIGE T1,^D64 ; And check range (0-63 is valid)
POPJ P, ; OK. Return
MOVEI S2,[ASCIZ/Area number out of range/] ; Error text
SETZ 0, ; Flag error
POPJ P, ; Return false
; $ACTION routine to verify that the node number in "area.node" is valid.
; We already know that the area number, if typed was valid.
;
CHKNNM: SKIPL T1,CR.RES(S2) ; Get number and check range
CAIL T1,^D1024 ; must be between 0 and 1023 inclusive
JRST [ MOVEI S2,[ASCIZ/Node number out of range/] ; Error text
SETZ 0, ; Flag error
POPJ P, ] ; And return false
POPJ P, ; OK. Return true
SUBTTL Main NCP Command Tables
ININCP::$INIT (NCPFDB) ; NCP Command Prompt Initialization
NCPFDB: $KEYDSP (NCPTBL)
NCPTBL: $STAB ; NCP Command Keyword Table
NCPKEY (CANFDB,CAN,CANCEL)
NCPKEY (CLRFDB,CLR,CLEAR)
NCPKEY (SETFDB,DEF,DEFINE)
NCPKEY (DMPFDB,DMP,DUMP)
NCPKEY (HLPFDB,HLP,HELP)
NCPKEY (SHWFDB,LST,LIST)
NCPKEY (LODFDB,LOD,LOAD)
NCPKEY (LOPFDB,LOP,LOOP)
NCPKEY (CLRFDB,PUR,PURGE)
NCPKEY (SETFDB,SET,SET)
NCPKEY (SHWFDB,SHW,SHOW)
NCPKEY (TELFDB,TEL,TELL)
NCPKEY (TRGFDB,TRG,TRIGGER)
NCPKEY (ZERFDB,ZRO,ZERO)
$ETAB
SUBTTL Tables that appear out of ordinary sequence
;The reason for such things is to get the $KNxxx constants defined in
;the NCPKEY macro to be consecutive.
;Module ids
SHW201:$STAB ; MODULE module-id keyword table
NCPKEY (SHW270,CFG,CONFIGURATOR)
NCPKEY (SHW280,CSL,CONSOLE)
NCPKEY (SHW290,LDR,LOADER)
NCPKEY (SHW290,LPR,LOOPER)
NCPKEY (SHW210,XAC,X25-ACCESS)
NCPKEY (SHW220,XPR,X25-PROTOCOL)
NCPKEY (SHW260,XSV,X25-SERVER)
$ETAB
SUBTTL HELP Command
ND CR.ADR,4 ; Address of current argument
HLPFDB: $NOISE (HLP100,<with>)
HLP100: $CTEXT (,<command>,<$ACTION(NCPHLP),$DEFAULT(HELP)>)
NCPHLP::MOVE T1,CR.ADR(S2) ; Get the data
HRROI T1,ARG.DA(T1) ; Point to the string
$CALL SETOUT## ; Setup proper $TEXT defaults
MOVEI S1,HELPFS ; Point to help file
MOVE S2,T1 ; Point to string
$CALL P$HELP##
$CALL SNDOUT## ; Send the output
$CALL P$NPRO## ; Mark no processing
SETO 0,
POPJ 17,0 ; Return TRUE
HELPFS: XWD HSIZ,0 ; File descriptor of help file for NCP
TOPS10< SIXBIT /HLP/ ; Directory
SIXBIT /NCP/ ; File name
SIXBIT /HLP/ ; Extension
EXP 0> ; PPN
TOPS20< ASCIZ /HLP:NCP.MEM/>
HSIZ==.-HELPFS
SUBTTL ABORT/CANCEL Command
CANFDB: $KEYDSP (CAN100,<$DEFAULT(QUEUE)>)
CAN100: $STAB ; ABORT/CANCEL Command Entity Keyword Table
NCPKEY (CAN200,QUE,QUEUE)
$ETAB
CAN200: $KEYDSP (CAN300,<$DEFAULT(REQUEST)>)
CAN300: $STAB ; QUEUE Entity Parameter Keyword Table
NCPKEY (CAN400,REQ,REQUEST)
$ETAB
CAN400: $NUMBER (NCPCFM,^D10,<Request Id Number>) ; NCP Request Number
SUBTTL CLEAR and PURGE Commands
CLRFDB: $KEYDSP (CLR100)
CLR100: $STAB ; CLEAR Command Entity Keyword Table
NCPKEY (CLR300,CKT,CIRCUIT)
NCPKEY (CLR500,XTR,EXECUTOR)
NCPKEY (CLR600,KNW,KNOWN)
NCPKEY (CLR400,LIN,LINE)
NCPKEY (CLR700,LGG,LOGGING)
NCPKEY (CLR800,MDL,MODULE)
NCPKEY (CLR900,NOD,NODE)
$ETAB
SUBTTL CLEAR/PURGE CIRCUIT Command
CLR300: CKT$ID (CLR305) ; CIRCUIT ckt-id
CLR305: $KEYDSP (CLR990,<$ALTERNATE(CLR310)>)
CLR310: $KEYDSP (CLR320,<$ALTERNATE(CLR360)>)
CLR320: $STAB ; CIRCUIT Parameter Keyword Table
PARKEY (CLR350,C$PACT,^D1150,ACTIVE)
PARKEY (CLR325,C$PBAB,^D1141,BABBLE)
PARKEY (CLR325,C$PCTR,^D0110,COUNTER)
PARKEY (CLR354,C$PDEA,^D1156,DEAD)
PARKEY (CLR352,C$PDYI,^D1155,DYING)
PARKEY (CLR352,C$PINA,^D1152,INACTIVE)
PARKEY (CLR335,C$PMAX,^D0000,MAXIMUM)
VALKEY (CLR399,C$POWR,^D1100,OWNER)
PARKEY (CLR325,C$PRCL,^D0921,RECALL)
PARKEY (CLR325,C$PTRA,^D1142,TRANSMIT)
$ETAB
CLR325: $KEYDSP (CLR330,<$DEFAULT(TIMER)>)
CLR330: $STAB ; COUNTER/RECALL TIMER
VALKEY (CLR399,C$PTMR,^D0,TIMER)
$ETAB
CLR335: $KEYDSP (CLR336,<$DEFAULT(RECALLS)>)
CLR336: $STAB
VALKEY (CLR399,C$MBUF,^D1145,BUFFERS)
VALKEY (CLR399,C$MRCL,^D0920,RECALLS)
VALKEY (CLR399,C$MTRA,^D1146,TRANSMITS)
$ETAB
CLR350: $KEYDSP (CLR351)
CLR351: $STAB ; ACTIVE Keyword Table
VALKEY (CLR399,C$SBAS,^D0,BASE)
VALKEY (CLR399,C$SINC,^D1,INCREMENT)
$ETAB
CLR352: $KEYDSP (CLR353)
CLR353: $STAB ; INACTIVE, DYING Keyword Table
VALKEY (CLR399,C$SBAS,^D0,BASE)
VALKEY (CLR399,C$SINC,^D1,INCREMENT)
VALKEY (CLR399,C$STHR,^D2,THRESHOLD)
$ETAB
CLR354: $KEYDSP (CLR355)
CLR355: $STAB ; DEAD Keyword Table
VALKEY (CLR399,C$STHR,^D2,THRESHOLD)
$ETAB
CLR360: $KEYDSP (CLR361,<$FLAGS(CM%SDH)>)
CLR361: $STAB
PARKEY (CLR362,C$PNOD,^D2600,NODE)
$ETAB
CLR362: $KEYDSP (CLR363,<$FLAGS(CM%SDH)>)
CLR363: $STAB
VALKEY (CLR399,C$NTYP,^D0,TYPE)
$ETAB
CLR399: $CRLF (<$ALTERNATE(CLR310)>)
SUBTTL CLEAR/PURGE LINE Command
CLR400: LINE$ID (CLR405) ; LINE Line-id
CLR405: $KEYDSP (CLR990,<$ALTERNATE(CLR410)>)
CLR410: $KEYDSP (CLR420)
CLR420: $STAB ; LINE Parameter Keyword Table
PARKEY (CLR425,L$PCTR,^D0110,COUNTER)
PARKEY (CLR425,L$PDEA,^D1151,DEAD)
PARKEY (CLR425,L$PDEL,^D1152,DELAY)
PARKEY (CLR425,L$PHBK,^D1122,HOLDBACK)
PARKEY (CLR435,L$PMAX,^D0000,MAXIMUM)
PARKEY (CLR425,L$PSCH,^D1150,SCHEDULING)
PARKEY (CLR425,L$PSTR,^D1154,STREAM)
$ETAB
CLR425: $KEYDSP (CLR430,<$DEFAULT(TIMER)>)
CLR430: $STAB
VALKEY (CLR499,L$PTMR,^D0,TIMER)
$ETAB
CLR435: $KEYDSP (CLR436,<$DEFAULT(RETRANSMITS)>)
CLR436: $STAB
VALKEY (CLR499,L$MRTR,^D1131,RETRANSMITS)
$ETAB
CLR499: $CRLF (<$ALTERNATE(CLR410)>)
SUBTTL CLEAR/PURGE EXECUTOR Command
CLR500: $KEYDSP (CLR510,<$ALTERNATE(CLR910),$DEFAULT(NODE)>)
CLR510: $STAB ; EXECUTOR Keyword Table
PARKEY (NCPCFM,N$XNOD,^D2501,NODE) ; Dummy parameter value for our use
$ETAB
SUBTTL CLEAR/PURGE KNOWN Command
CLR600: $KEYDSP (CLR610)
CLR610: $STAB ; KNOWN Entities Keyword Table
NCPKEY (CLR305,CKT,CIRCUITS)
NCPKEY (CLR405,LIN,LINES)
NCPKEY (CLR720,LGG,LOGGING)
NCPKEY (CLR906,NOD,NODES)
$ETAB
SUBTTL CLEAR/PURGE LOGGING Command
CLR700: $KEYDSP (CLR710)
CLR710: $STAB ; LOGGING sink-type Keyword Table
VALKEY (CLR720,E$SCSL,^D1,CONSOLE)
VALKEY (CLR720,E$SFIL,^D2,FILE)
VALKEY (CLR720,E$SMTR,^D3,MONITOR)
$ETAB
CLR720: $KEYDSP (CLR730)
CLR725: $KEYDSP (CLR730,<$ALTERNATE(NCPCFM)>)
CLR730: $STAB ; LOGGING Entities Keyword Table
PARKEY (CLR735,E$PEVT,^D201,EVENT)
PARKEY (CLR740,E$PKNW,^D201,KNOWN)
VALKEY (CLR725,E$PNAM,^D100,NAME)
$ETAB
CLR735: EVLIST (CLR750) ; EVENT event-list
CLR740: $KEYDSP (CLR745,<$DEFAULT(EVENTS)>)
CLR745: $STAB ; KNOWN keyword parameter table
KNWKEY (CLR750,E$KEVT,^D0,EVENTS)
$ETAB
CLR750: $KEYDSP (CLR755,<$ALTERNATE(CLR775)>)
CLR755: $STAB ; Optional source-qual keyword table
PARKEY (CLR756,E$QCKT,^D3,CIRCUIT)
PARKEY (CLR757,E$QLIN,^D1,LINE)
PARKEY (CLR759,E$QMOD,^D4,MODULE)
PARKEY (CLR758,E$QNOD,^D0,NODE)
$ETAB
CLR756: CKT$ID (CLR775) ; CIRCUIT ckt-id
CLR757: LINE$ID (CLR775) ; LINE line-id
CLR758: NOD$ID (CLR775) ; NODE node-id
CLR759: $KEYDSP (CLR760)
CLR760: $STAB ; MODULE module-id Keyword Table
NCPKEY (CLR775,XAC,X25-ACCESS)
NCPKEY (CLR775,XPR,X25-PROTOCOL)
NCPKEY (CLR775,XSV,X25-SERVER)
$ETAB
CLR775: $KEYDSP (CLR780,<$ALTERNATE(CLR725)>)
CLR780: $STAB ; Optional sink-node Keyword Table
PARKEY (CLR785,E$PSNK,^D200,SINK)
$ETAB
CLR785: $KEYDSP (CLR790,<$DEFAULT(EXECUTOR)>)
CLR790: $STAB ; SINK Keyword Table
VALKEY (CLR725,E$SXTR,^D0,EXECUTOR)
PARKEY (CLR795,E$SNOD,^D0,NODE)
$ETAB
CLR795: NOD$ID (CLR725) ; SINK NODE node-id
SUBTTL CLEAR/PURGE MODULE Commands
CLR800: $KEYDSP (CLR805)
CLR805: $STAB ; MODULE module-id Keyword Table
NCPKEY (CLR810,XAC,X25-ACCESS)
NCPKEY (CLR840,XPR,X25-PROTOCOL)
NCPKEY (CLR870,XSV,X25-SERVER)
$ETAB
SUBTTL CLEAR/PURGE MODULE X25-ACCESS Commands
CLR810: $KEYDSP (CLR812,<$ALTERNATE(CLR814)>)
CLR811: $KEYDSP (CLR812,<$ALTERNATE(CLR816)>)
CLR812: $STAB ; X25-ACCESS Module Parameter Keyword Table
VALKEY (CLR811,X$AACT,^D332,ACCOUNT)
VALKEY (CLR811,X$APWD,^D331,PASSWORD)
VALKEY (CLR811,X$AUSR,^D330,USER)
$ETAB
CLR814: $KEYDSP (CLR815)
CLR815: $STAB
PARKEY (CLR816,X$ALL,^D000,ALL)
$ETAB
CLR816: $KEYDSP (CLR817,<$ALTERNATE(NCPCFM)>)
CLR817: $STAB ; Network Qualifier Table for other parameters
PARKEY (CLR818,X$AKNW,^D1110,KNOWN)
PARKEY (CLR820,X$ANWK,^D1110,NETWORK)
$ETAB
CLR818: $KEYDSP (CLR819,<$DEFAULT(NETWORKS)>)
CLR819: $STAB
KNWKEY (NCPCFM,X$KNWK,^D0000,NETWORKS)
$ETAB
CLR820: NET$NAME (NCPCFM)
SUBTTL CLEAR/PURGE MODULE X25-PROTOCOL Commands
CLR840: $KEYDSP (CLR842,<$ALTERNATE(CLR848)>)
CLR841: $CRLF (<$ALTERNATE(CLR86G)>)
CLR842: $STAB ; MODULE X25-PROTOCOL regular parameter table
PARKEY (CLR844,X$PCLL,^D1160,CALL)
PARKEY (CLR844,X$PCLR,^D1161,CLEAR)
PARKEY (CLR846,X$PMAX,^D0000,MAXIMUM)
PARKEY (CLR844,X$PRST,^D1162,RESET)
PARKEY (CLR844,X$PRTT,^D1163,RESTART)
$ETAB
CLR844: $KEYDSP (CLR845,<$DEFAULT(TIMER)>)
CLR845: $STAB ; CALL/CLEAR/RESET/RESTART TIMER
VALKEY (CLR841,X$PTMR,^D0,TIMER)
$ETAB
CLR846: $KEYDSP (CLR847)
CLR847: $STAB ; MAXIMUM parameter table
VALKEY (CLR841,X$MCLR,^D1152,CLEARS)
VALKEY (CLR841,X$MRES,^D1153,RESETS)
VALKEY (CLR841,X$MRST,^D1154,RESTARTS)
$ETAB
CLR848: $KEYDSP (CLR849,<$ALTERNATE(CLR854)>)
CLR849: $STAB ; DTE options table
PARKEY (CLR850,X$PCTR,^D0100,COUNTER)
PARKEY (CLR852,X$PLIN,^D1120,LINE)
$ETAB
CLR850: $KEYDSP (CLR851,<$DEFAULT(TIMER)>)
CLR851: $STAB
VALKEY (CLR853,X$PTMR,^D0,TIMER)
$ETAB
CLR852: LINE$ID (CLR853)
CLR853: $KEYDSP (CLR849,<$ALTERNATE(CLR864)>)
CLR854: $KEYDSP (CLR855,<$ALTERNATE(CLR862)>)
CLR855: $STAB ; GROUP qualifier parameter
PARKEY (CLR856,X$PGRP,^D1101,GROUP)
$ETAB
CLR856: $FIELD (CLR858,<Group Name>)
CLR858: $KEYDSP (CLR859)
CLR859: $STAB ; GROUP options parameter table
PARKEY (CLR860,X$GDTE,^D1170,DTE)
VALKEY (CLR861,X$GTYP,^D1172,TYPE)
$ETAB
CLR860: DTE$ADR (CLR861)
CLR861: $KEYDSP (CLR859,<$ALTERNATE(NCPCFM)>)
CLR862: $KEYDSP (CLR863)
CLR863: $STAB
PARKEY (CLR86A,X$ALL,^D0000,ALL)
$ETAB
CLR864: $KEYDSP (CLR866,<$ALTERNATE(NCPCFM)>)
CLR866: $STAB ; DTE qualifier table
PARKEY (CLR867,X$PDTE,^D1100,DTE)
PARKEY (CLR868,X$PKNW,^D1100,KNOWN)
$ETAB
CLR867: DTE$ADR (NCPCFM)
CLR868: $KEYDSP (CLR869,<$DEFAULT(DTES)>)
CLR869: $STAB
KNWKEY (NCPCFM,X$KDTE,^D0000,DTES)
$ETAB
CLR86A: $KEYDSP (CLR86B,<$ALTERNATE(NCPCFM)>)
CLR86B: $STAB ; DTE and GROUP qualifier table
PARKEY (CLR867,X$PDTE,^D1100,DTE)
PARKEY (CLR86C,X$PGRP,^D1101,GROUP)
PARKEY (CLR86E,X$PKNW,^D1100,KNOWN)
$ETAB
CLR86C: $FIELD (NCPCFM,<Group Name>)
CLR86E: $KEYDSP (CLR86F)
CLR86F: $STAB ; KNOWN qualifiers table
KNWKEY (NCPCFM,X$KDTE,^D0,DTES)
KNWKEY (NCPCFM,X$KGRP,^D1,GROUPS)
$ETAB
CLR86G: $KEYDSP (CLR842,<$ALTERNATE(CLR86H)>)
CLR86H: $KEYDSP (CLR849,<$ALTERNATE(CLR86I)>)
CLR86I: $KEYDSP (CLR855)
SUBTTL CLEAR/PURGE MODULE X25-SERVER Commands
CLR870: $KEYDSP (CLR871,<$ALTERNATE(CLR874)>)
CLR871: $STAB
VALKEY (CLR878,X$SACT,^D332,ACCOUNT)
PARKEY (CLR872,X$SCLL,^D000,CALL)
VALKEY (CLR878,X$SGRP,^D353,GROUP)
VALKEY (CLR878,X$SNBR,^D354,NUMBER)
VALKEY (CLR878,X$SPWD,^D331,PASSWORD)
VALKEY (CLR878,X$SPRI,^D350,PRIORITY)
VALKEY (CLR878,X$SSUB,^D355,SUBADDRESSES)
VALKEY (CLR878,X$SUSR,^D330,USER)
$ETAB
CLR872: $KEYDSP (CLR873)
CLR873: $STAB ; CALL MASK/VALUE parameters table
VALKEY (CLR878,X$CMSK,^D351,MASK)
VALKEY (CLR878,X$CVAL,^D352,VALUE)
$ETAB
CLR874: $KEYDSP (CLR875,<$ALTERNATE(CLR880)>)
CLR875: $STAB
PARKEY (CLR876,X$SCTR,^D100,COUNTER)
$ETAB
CLR876: $KEYDSP (CLR877,<$DEFAULT(TIMER)>)
CLR877: $STAB ; COUNTER TIMER parameter
VALKEY (CLR87A,X$STMR,^D0,TIMER)
$ETAB
CLR878: $KEYDSP (CLR871,<$ALTERNATE(CLR879)>)
CLR879: $KEYDSP (CLR875,<$ALTERNATE(CLR882)>)
CLR87A: $KEYDSP (CLR87B,<$ALTERNATE(NCPCFM)>)
CLR87B: $STAB
VALKEY (CLR87E,X$SACT,^D332,ACCOUNT)
PARKEY (CLR87C,X$SCLL,^D000,CALL)
VALKEY (CLR87E,X$SGRP,^D353,GROUP)
VALKEY (CLR87E,X$SNBR,^D354,NUMBER)
VALKEY (CLR87E,X$SPWD,^D331,PASSWORD)
VALKEY (CLR87E,X$SPRI,^D350,PRIORITY)
VALKEY (CLR87E,X$SSUB,^D355,SUBADDRESSES)
VALKEY (CLR87E,X$SUSR,^D330,USER)
$ETAB
CLR87C: $KEYDSP (CLR87D)
CLR87D: $STAB ; CALL MASK/VALUE parameters table
VALKEY (CLR87E,X$CMSK,^D351,MASK)
VALKEY (CLR87E,X$CVAL,^D352,VALUE)
$ETAB
CLR87E: $KEYDSP (CLR87B,<$ALTERNATE(CLR882)>)
CLR880: $KEYDSP (CLR881)
CLR881: $STAB ; ALL parameter table
PARKEY (CLR882,X$ALL,^D000,ALL)
$ETAB
CLR882: $KEYDSP (CLR883,<$ALTERNATE(NCPCFM)>)
CLR883: $STAB ; DESTINATION qualifier parameters table
PARKEY (CLR884,X$SDST,^D300,DESTINATION)
PARKEY (CLR886,X$SKNW,^D300,KNOWN)
$ETAB
CLR884: DEST$NAME (NCPCFM)
CLR886: $KEYDSP (CLR887,<$DEFAULT(DESTINATIONS)>)
CLR887: $STAB
KNWKEY (NCPCFM,X$KDST,^D000,DESTINATIONS)
$ETAB
SUBTTL CLEAR/PURGE NODE Command
CLR900: NOD$NUMBER (CLR906,CLR901,<ALL>) ; NODE node-address
CLR901: NOD$NAME (CLR904) ; NODE node-name
CLR904: $KEYDSP (CLR905,<$ALTERNATE(CLR906),$DEFAULT(CIRCUIT)>)
CLR905: $STAB
VALKEY (NCPCFM,N$PCKT,^D501,CIRCUIT)
$ETAB
CLR906: $KEYDSP (CLR990,<$ALTERNATE(CLR910),$DEFAULT(ALL)>)
CLR910: $KEYDSP (CLR915,<$ALTERNATE(CLR916)>)
CLR915: $STAB ; NODE Parameter Keyword Table
PARKEY (CLR9C0,N$PCON,^D000,CONSOLE)
PARKEY (CLR920,N$PCTR,^D160,COUNTER)
VALKEY (CLR999,N$PCPU,^D113,CPU)
PARKEY (CLR9A0,N$PDIA,^D123,DIAGNOSTIC)
PARKEY (CLR925,N$PDMP,^D000,DUMP)
VALKEY (CLR9B0,N$PHRD,^D114,HARDWARE)
VALKEY (CLR999,N$PHST,^D141,HOST)
VALKEY (CLR999,N$PIDN,^D100,IDENTIFICATION)
PARKEY (CLR920,N$PICG,^D510,INCOMING)
PARKEY (CLR930,N$PLOD,^D120,LOAD)
VALKEY (NCPCFM,N$PNAM,^D500,NAME)
PARKEY (CLR920,N$POTG,^D511,OUTGOING)
PARKEY (CLR935,N$PSDY,^D000,SECONDARY)
PARKEY (CLR940,N$PSVC,^D000,SERVICE)
PARKEY (CLR945,N$PSWR,^D000,SOFTWARE)
PARKEY (CLR950,N$PTRT,^D000,TERTIARY)
$ETAB
CLR916: $KEYDSP (CLR917,<$FLAGS(CM%SDH)>)
CLR917: $STAB ; FENCE (in house command)
PARKEY (CLR999,N$PFEN,^D2500,FENCE,CM%INV)
$ETAB
CLR920: $KEYDSP (CLR921,<$DEFAULT(TIMER)>)
CLR921: $STAB
VALKEY (CLR999,N$PTMR,^D0,TIMER)
$ETAB
CLR925: $KEYDSP (CLR926)
CLR926: $STAB ; DUMP parameter table
VALKEY (CLR999,N$DADR,^D135,ADDRESS)
VALKEY (CLR999,N$DCNT,^D136,COUNT)
VALKEY (CLR999,N$DFIL,^D130,FILE)
$ETAB
CLR930: $KEYDSP (CLR931,<$DEFAULT(FILE)>)
CLR931: $STAB ; LOAD parameter table
VALKEY (CLR999,N$LFIL,^D0,FILE)
$ETAB
CLR935: $KEYDSP (CLR936)
CLR936: $STAB ; SECONDARY parameter table
VALKEY (CLR999,N$SDPR,^D131,DUMPER)
VALKEY (CLR999,N$SLDR,^D121,LOADER)
$ETAB
CLR940: $KEYDSP (CLR941)
CLR941: $STAB ; SERVICE parameter table
VALKEY (CLR999,N$SCKT,^D110,CIRCUIT)
VALKEY (CLR999,N$SDVC,^D112,DEVICE)
VALKEY (CLR942,N$SNOD,^D115,NODE)
VALKEY (CLR999,N$SPWD,^D111,PASSWORD)
$ETAB
CLR942: $KEYDSP (CLR943,$DEFAULT<VERSION>)
CLR943: $STAB
VALKEY (CLR999,N$NVER,^D000,VERSION)
$ETAB
CLR945: $KEYDSP (CLR946)
CLR946: $STAB ; SOFTWARE parameter table
VALKEY (CLR999,N$SIDN,^D126,IDENTIFICATION)
VALKEY (CLR999,N$STYP,^D125,TYPE)
$ETAB
CLR950: $KEYDSP (CLR951,<$DEFAULT(LOADER)>)
CLR951: $STAB ; TERTIARY device table
VALKEY (CLR999,N$TLDR,^D122,LOADER)
$ETAB
CLR990: $STAB ; ALL Keyword Dispatch Table
PARKEY (NCPCFM,P$ALL,,ALL)
$ETAB
CLR999: $CRLF (<$ALTERNATE(CLR910)>)
;CLEAR NODE x DIAGNOSTIC
CLR9A0: $KEYDSP (CLR9A1,<$DEFAULT(FILE)>)
CLR9A1: $STAB
PARKEY (NCPCFM,N$PDI1,^D0,FILE)
$ETAB
;CLEAR NODE x HARDWARE
CLR9B0: $KEYDSP (CLR9B1,<$DEFAULT(ADDRESS)>)
CLR9B1: $STAB
PARKEY (NCPCFM,N$PHR1,^D0,ADDRESS)
$ETAB
;CLEAR NODE x CONSOLE
CLR9C0: $KEYDSP (CLR9C1)
CLR9C1: $STAB
PARKEY (CLR9C4,N$CLOD,^D000,LOAD)
PARKEY (CLR9C2,N$CSEC,^D000,SECONDARY)
$ETAB
CLR9C2: $KEYDSP (CLR9C3,<$DEFAULT(LOADER)>)
CLR9C3: $STAB
VALKEY (NCPCFM,N$CSLD,^D2511,LOADER)
$ETAB
CLR9C4: $KEYDSP (CLR9C5,<$DEFAULT(FILE)>)
CLR9C5: $STAB
VALKEY (NCPCFM,N$NLDF,^D2512,FILE)
$ETAB
SUBTTL DUMP Command
DMPFDB: $KEYDSP (DMP100)
DMP100: $STAB ; DUMP Command Entity Keyword Table
NCPKEY (DMP200,NOD,NODE)
NCPKEY (DMP300,VIA,VIA)
$ETAB
DMP200: NOD$ID (DMP210) ; Node name or number
DMP210: $KEYDSP (DMP220,<$ALTERNATE(NCPCFM)>)
DMP220: $STAB ; Optional DUMP Keyword Table
PARKEY (DMP230,N$PDMP,^D000,DUMP)
PARKEY (DMP250,N$SPWD,,PASSWORD)
PARKEY (DMP260,N$LPHY,,PHYSICAL)
PARKEY (DMP238,N$SDPR,,SECONDARY)
PARKEY (DMP244,N$PSVC,,SERVICE)
PARKEY (DMP252,N$DFIL,,TO)
PARKEY (DMP254,N$SCKT,,VIA)
$ETAB
DMP230: $KEYDSP (DMP232)
DMP232: $STAB
PARKEY (DMP234,N$DADR,^D135,ADDRESS)
PARKEY (DMP236,N$DCNT,^D136,COUNT)
$ETAB
DMP234: $NUMBER (DMP210,<^D8>,<Octal Beginning Dump Address>)
DMP236: $NUMBER (DMP210,<^D10>,<Number of Words to Dump>)
DMP238: $KEYDSP (DMP240,<$ALTERNATE(DMP242),$DEFAULT(DUMPER)>)
DMP240: $STAB ; SECONDARY device table
PARKEY (DMP242,N$PSDY,,DUMPER)
$ETAB
DMP242: NETIFI (DMP210) ; SECONDARY DUMPER
DMP244: $KEYDSP (DMP246)
DMP246: $STAB ; SERVICE keyword dispatch table
PARKEY (DMP248,N$SDVC,,DEVICE)
PARKEY (DMP250,N$SPWD,,PASSWORD)
$ETAB
DMP248: LALL
DEV$TYPE (DMP210) ; SERVICE DEVICE dev-id
SALL
DMP250: SVC$PASSWORD (DMP210)
DMP252: NETOFI (DMP210) ; DUMP TO output file
DMP254: CKT$ID (DMP210) ; DUMP NODE node-id VIA ckt-id
DMP260: $KEYDSP (DMP261,<$DEFAULT(ADDRESS)>)
DMP261: $STAB
PARKEY (DMP262,N$LPHA,,ADDRESS)
$ETAB
DMP262: NI$ADDRESS (DMP210)
DMP300: CKT$ID (DMP310) ; DUMP VIA ckt-id
DMP310: $KEYDSP (DMP320,<$ALTERNATE(NCPCFM)>)
DMP320: $STAB ; Optional DUMP Keyword Table
PARKEY (DMP230,N$PDMP,^D000,DUMP)
PARKEY (DMP250,N$SPWD,,PASSWORD)
PARKEY (DMP260,N$LPHY,,PHYSICAL)
PARKEY (DMP238,N$SDPR,,SECONDARY)
PARKEY (DMP244,N$PSVC,,SERVICE)
PARKEY (DMP252,N$DFIL,,TO)
$ETAB
SUBTTL LOAD Command
LODFDB: $KEYDSP (LOD100)
LOD100: $STAB ; LOAD Command Entity Keyword Table
NCPKEY (LOD200,NOD,NODE)
NCPKEY (LOD300,VIA,VIA)
$ETAB
LOD200: NOD$ID (LOD210) ; Node Name or Number
LOD210: $KEYDSP (LOD220,<$ALTERNATE(NCPCFM)>)
LOD220: $STAB ; LOAD Optional Keyword Table
PARKEY (LOD230,N$PADR,,ADDRESS)
PARKEY (LOD231,N$PCPU,^D113,CPU)
PARKEY (LOD270,N$PLOD,,FROM)
PARKEY (LOD234,N$PHST,^D141,HOST)
PARKEY (LOD235,N$PNAM,^D500,NAME)
PARKEY (LOD242,N$SPWD,,PASSWORD)
PARKEY (LOD280,N$LPHY,,PHYSICAL)
PARKEY (LOD236,N$SLDR,,SECONDARY)
PARKEY (LOD239,N$PSVC,,SERVICE)
PARKEY (LOD243,N$PSWR,,SOFTWARE)
PARKEY (LOD256,N$TLDR,,TERTIARY)
PARKEY (LOD262,N$SCKT,,VIA)
$ETAB
LOD230: NOD$NUMBER (LOD210) ; ADDRESS node-address
LOD231: $KEYDSP (LOD232)
LOD232: $STAB ; CPU-type Keyword Table
VALKEY (LOD210,N$D10,,DECSYSTEM-1020)
VALKEY (LOD210,N$P11,,PDP-11)
VALKEY (LOD210,N$P08,,PDP-8)
VALKEY (LOD210,N$VAX,,VAX-11)
$ETAB
LOD234: NOD$ID (LOD210) ; HOST node-id
LOD235: NOD$NAME (LOD210) ; NAME node-name
LOD236: $KEYDSP (LOD237,<$ALTERNATE(LOD270),$DEFAULT(LOADER)>)
LOD237: $STAB
PARKEY (LOD270,N$PSDY,,LOADER)
$ETAB
LOD239: $KEYDSP (LOD240)
LOD240: $STAB ; SERVICE Keyword Table
PARKEY (LOD241,N$SDVC,,DEVICE)
PARKEY (LOD24A,N$SNOD,,NODE)
PARKEY (LOD242,N$SPWD,,PASSWORD)
$ETAB
LOD241: DEV$TYPE (LOD210) ; SERVICE DEVICE dev-id
LOD24A: $KEYDSP (LOD24B,$DEFAULT<VERSION>)
LOD24B: $STAB
PARKEY (LOD24C,N$NVER,,VERSION)
$ETAB
LOD24C: $NUMBER (LOD210,<^D10>)
LOD242: SVC$PASSWORD (LOD210) ; [SERVICE] PASSWORD password
LOD243: $KEYDSP (LOD244)
LOD244: $STAB ; SOFTWARE Keyword Dispatch
PARKEY (LOD245,N$SIDN,,IDENTIFICATION)
PARKEY (LOD248,N$STYP,,TYPE)
$ETAB
LOD245: STR$ID (LOD210,<Software Identification>)
LOD248: $KEYDSP (LOD250)
LOD250: $STAB ; SOFTWARE TYPE Keyword Dispatch
VALKEY (LOD210,N$SSLD,,SECONDARY-LOADER)
VALKEY (LOD210,N$SSYS,,SYSTEM)
VALKEY (LOD210,N$STLD,,TERTIARY-LOADER)
$ETAB
LOD256: $KEYDSP (LOD258,<$ALTERNATE(LOD270),$DEFAULT(LOADER)>)
LOD258: $STAB
PARKEY (LOD270,N$PTRT,,LOADER) ; TERTIARY LOADER
$ETAB
LOD262: CKT$ID (LOD210) ; LOAD NODE node-id VIA ckt-id
LOD270: NETIFI (LOD210) ; TERTIARY LOADER file-id
LOD280: $KEYDSP (LOD281,<$DEFAULT(ADDRESS)>)
LOD281: $STAB
PARKEY (LOD282,N$LPHA,,ADDRESS)
$ETAB
LOD282: NI$ADDRESS (LOD210)
LOD300: CKT$ID (LOD310) ; LOAD VIA ckt-id
LOD310: $KEYDSP (LOD320,<$ALTERNATE(NCPCFM)>)
LOD320: $STAB ; VIA Optional Keyword Table
PARKEY (LOD230,N$PADR,,ADDRESS)
PARKEY (LOD231,N$PCPU,^D113,CPU)
PARKEY (LOD270,N$PLOD,,FROM)
PARKEY (LOD234,N$PHST,^D141,HOST)
PARKEY (LOD235,N$PNAM,^D500,NAME)
PARKEY (LOD242,N$SPWD,,PASSWORD)
PARKEY (LOD280,N$LPHY,,PHYSICAL)
PARKEY (LOD236,N$SLDR,,SECONDARY)
PARKEY (LOD239,N$PSVC,,SERVICE)
PARKEY (LOD243,N$PSWR,,SOFTWARE)
PARKEY (LOD256,N$TLDR,,TERTIARY)
$ETAB
SUBTTL LOOP Command
LOPFDB: $KEYDSP (LOP100)
LOP100: $STAB ; LOOP Command Entity Keyword Table
NCPKEY (LOP110,CKT,CIRCUIT)
NCPKEY (LOP200,XTR,EXECUTOR)
NCPKEY (LOP300,LIN,LINE)
NCPKEY (LOP400,NOD,NODE)
$ETAB
LOP110: CKT$ID (LOP120)
LOP120: $KEYDSP (LOP121,<$ALTERNATE(LOP310)>)
LOP121: $STAB
PARKEY (LOP130,N$LASS,^D000,ASSISTANT)
PARKEY (LOP140,N$LHLP,^D154,HELP)
PARKEY (LOP150,N$LNOD,^D155,NODE)
PARKEY (LOP160,N$LPHY,^D10,PHYSICAL)
$ETAB
LOP130: $KEYDSP (LOP131)
LOP131: $STAB ;ASSISTANT keyword table
PARKEY (LOP132,N$ANOD,^D156,NODE)
PARKEY (LOP135,N$APHY,^D153,PHYSICAL)
$ETAB
LOP132: NOD$ID (LOP310)
LOP135: $KEYDSP (LOP136,$DEFAULT<ADDRESS>)
LOP136: $STAB
PARKEY (LOP137,N$LAPA,^D000,ADDRESS)
$ETAB
LOP137: NI$ADDRESS (LOP310)
LOP140: $KEYDSP (LOP145)
LOP145: $STAB ;HELP option keyword table
VALKEY (LOP310,N$HFUL,^D2,FULL)
VALKEY (LOP310,N$HTRA,^D2,TRANSMIT)
$ETAB
LOP150: NOD$ID (LOP310)
LOP160: $KEYDSP (LOP161,$DEFAULT<ADDRESS>)
LOP161: $STAB
PARKEY (LOP162,N$LPHA,^D000,ADDRESS)
$ETAB
LOP162: NI$ADDRESS (LOP310)
LOP200: $KEYDSP (LOP210,<$ALTERNATE(LOP310)>)
LOP210: $STAB ; ACCESS control Keyword Table
PARKEY (LOP220,N$XACT,,ACCOUNT)
PARKEY (LOP230,N$XPWD,,PASSWORD)
PARKEY (LOP240,N$XUSR,,USER)
$ETAB
LOP220: $FIELD (LOP200,<Account String>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
LOP230: $FIELD (LOP200,<Access Password String>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
LOP240: $FIELD (LOP200,<User Name>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
LOP300: LINE$ID (LOP310)
LOP310: $KEYDSP (LOP320,<$ALTERNATE(NCPCFM)>)
LOP320: $STAB
PARKEY (LOP330,N$LDRC,^D150,COUNT)
PARKEY (LOP340,N$LLTH,^D151,LENGTH)
PARKEY (LOP350,N$LWTH,^D152,WITH)
$ETAB
LOP330: $NUMBER (LOP310,<^D10>) ; COUNT count
LOP340: $NUMBER (LOP310,<^D10>) ; LENGTH length
LOP350: $KEYDSP (LOP351)
LOP351: $STAB ; WITH Option Keyword Table
VALKEY (LOP310,N$WMXD,^D2,MIXED)
VALKEY (LOP310,N$WONE,^D1,ONES)
VALKEY (LOP310,N$WZRO,^D0,ZEROES)
$ETAB
LOP400: NOD$ID (LOP200)
SUBTTL SHOW and LIST Commands
SHWFDB: $KEYDSP (SHW100)
SHW100: $STAB
NCPKEY (SHW110,ATV,ACTIVE)
NCPKEY (SHW410,ADJ,ADJACENT)
NCPKEY (SHW112,ARE,AREA)
NCPKEY (SHW130,CKT,CIRCUIT)
NCPKEY (SHW192,XTR,EXECUTOR)
NCPKEY (SHW110,KNW,KNOWN)
NCPKEY (SHW140,LIN,LINE)
NCPKEY (SHW170,LGG,LOGGING)
NCPKEY (SHW190,LOP,LOOP)
NCPKEY (SHW200,MDL,MODULE)
NCPKEY (SHW400,NOD,NODE)
NCPKEY (NCPCFM,QUE,QUEUE)
NCPKEY (SHW420,SIG,SIGNIFICANT,CM%INV) ;Make invisible
$ETAB
SHW110: $KEYDSP (SHW111)
SHW111: $STAB ; ACTIVE/KNOWN Entities Keyword Table
NCPKEY (SHW192,ARE,AREAS)
NCPKEY (SHW422,CKT,CIRCUITS)
NCPKEY (SHW192,LIN,LINES)
NCPKEY (SHW500,LGG,LOGGING)
NCPKEY (SHW192,MDL,MODULES)
NCPKEY (SHW192,NOD,NODES)
$ETAB
SHW112: $NUMBER (SHW192,<^D10>,<Area number>) ; AREA area-id
SHW130: CKT$ID (SHW422) ; CIRCUIT ckt-id
SHW140: LINE$ID (SHW192) ; LINE line-id
SHW170: $KEYDSP (SHW180)
SHW180: $STAB ; LOGGING sink-type keyword table
VALKEY (SHW500,E$SCSL,^D1,CONSOLE)
VALKEY (SHW500,E$SFIL,^D2,FILE)
VALKEY (SHW500,E$SMTR,^D3,MONITOR)
$ETAB
SHW190: $KEYDSP (SHW191,<$DEFAULT(NODES)>)
SHW191: $STAB ; LOOP entities keyword table
NCPKEY (SHW192,NOD,NODES)
$ETAB
SHW192: $KEYDSP (SHW193,<$DEFAULT(SUMMARY)>)
SHW193: $STAB ; SHOW Parameter Keyword Table
NCPKEY (NCPCFM,CHR,CHARACTERISTICS)
NCPKEY (NCPCFM,CTR,COUNTERS)
NCPKEY (NCPCFM,STS,STATUS)
NCPKEY (NCPCFM,SUM,SUMMARY)
$ETAB
SHW200: $KEYDSP (SHW201)
;The following table has been moved to the beginning so that
;$KNxxx for module ids will be consecutive.
;SHW201:$STAB ; MODULE module-id keyword table
; NCPKEY (SHW270,CFG,CONFIGURATOR)
; NCPKEY (SHW280,CSL,CONSOLE)
; NCPKEY (SHW290,LDR,LOADER)
; NCPKEY (SHW290,LPR,LOOPER)
; NCPKEY (SHW210,XAC,X25-ACCESS)
; NCPKEY (SHW220,XPR,X25-PROTOCOL)
; NCPKEY (SHW260,XSV,X25-SERVER)
; $ETAB
SUBTTL SHOW/LIST MODULE X25-ACCESS Commands
SHW210: $KEYDSP (SHW211,<$DEFAULT(CHARACTERISTICS)>)
SHW211: $STAB ; SHOW MODULE X25-ACCESS selector table
NCPKEY (SHW212,CHR,CHARACTERISTICS)
NCPKEY (SHW212,CTR,COUNTERS)
NCPKEY (SHW212,STS,STATUS)
NCPKEY (SHW212,SUM,SUMMARY)
$ETAB
SHW212: $KEYDSP (SHW213,<$ALTERNATE(NCPCFM)>)
SHW213: $STAB ; SHOW MODULE X25-ACCESS network qualifier
PARKEY (SHW214,X$AKNW,^D1110,KNOWN)
PARKEY (SHW216,X$ANWK,^D1110,NETWORK)
$ETAB
SHW214: $KEYDSP (SHW215,<$DEFAULT(NETWORKS)>)
SHW215: $STAB
KNWKEY (NCPCFM,X$KNWK,^D0000,NETWORKS)
$ETAB
SHW216: NET$NAME (NCPCFM) ; NETWORK network-name
SUBTTL SHOW/LIST MODULE X25-PROTOCOL Commands
SHW220: $KEYDSP (SHW221,<$DEFAULT(SUMMARY)>)
SHW221: $STAB ; SHOW MODULE X25-PROTOCOL selector table
NCPKEY (SHW222,CHR,CHARACTERISTICS)
NCPKEY (SHW222,CTR,COUNTERS)
NCPKEY (SHW222,STS,STATUS)
NCPKEY (SHW222,SUM,SUMMARY)
$ETAB
SHW222: $KEYDSP (SHW223,<$ALTERNATE(NCPCFM)>)
SHW223: $STAB ; X25-PROTOCOL Qualifier Table
PARKEY (SHW224,X$PDTE,^D1100,DTE)
PARKEY (SHW230,X$PGRP,^D1101,GROUP)
PARKEY (SHW240,X$PKNW,^D1100,KNOWN)
$ETAB
SHW224: DTE$ADR (NCPCFM) ; DTE dte-address
SHW230: $FIELD (NCPCFM,<Group Name>) ; GROUP group-name
SHW240: $KEYDSP (SHW241)
SHW241: $STAB
KNWKEY (NCPCFM,X$KDTE,^D0000,DTES)
KNWKEY (NCPCFM,X$KGRP,^D0001,GROUPS)
$ETAB
SUBTTL SHOW/LIST MODULE X25-SERVER Commands
SHW260: $KEYDSP (SHW261,<$DEFAULT(SUMMARY)>)
SHW261: $STAB ; SHOW MODULE X25-SERVER selector table
NCPKEY (SHW262,CHR,CHARACTERISTICS)
NCPKEY (NCPCFM,CTR,COUNTERS)
NCPKEY (SHW262,STS,STATUS)
NCPKEY (SHW262,SUM,SUMMARY)
$ETAB
SHW262: $KEYDSP (SHW263,<$ALTERNATE(NCPCFM)>)
SHW263: $STAB ; SHOW MODULE X25-SERVER destination qualifier
PARKEY (SHW264,X$SDST,^D300,DESTINATION)
PARKEY (SHW266,X$SKNW,^D300,KNOWN)
$ETAB
SHW264: DEST$NAME (NCPCFM) ; DESTINATION dest-name
SHW266: $KEYDSP (SHW267,<$DEFAULT(DESTINATIONS)>)
SHW267: $STAB
KNWKEY (NCPCFM,X$KDST,^D000,DESTINATIONS)
$ETAB
SUBTTL SHOW/LIST MODULE CONFIGURATOR Commands
SHW270: $KEYDSP (SHW271,<$ALTERNATE(SHW275)>)
SHW271: $STAB ; CONFIGURATOR qualifier table
PARKEY (SHW272,C$FCKT,^D100,CIRCUIT)
PARKEY (SHW273,C$FKNW,^D100,KNOWN)
$ETAB
SHW272: CKT$ID (SHW275) ; CIRCUIT circuit-id
SHW273: $KEYDSP (SHW274,<$DEFAULT(CIRCUITS)>)
SHW274: $STAB ; KNOWN CIRCUITS
KNWKEY (SHW275,C$FKNC,^D0,CIRCUITS)
$ETAB
SHW275: $KEYDSP (SHW276,<$DEFAULT(SUMMARY)>)
SHW276: $STAB ; SHOW MODULE CONFIGURATOR selector table
NCPKEY (NCPCFM,STS,STATUS)
NCPKEY (NCPCFM,SUM,SUMMARY)
$ETAB
SUBTTL SHOW/LIST MODULE CONSOLE Commands
SHW280: $KEYDSP (SHW281)
SHW281: $STAB ; SHOW/LIST MODULE CONSOLE selector table
NCPKEY (NCPCFM,CHR,CHARACTERISTICS)
NCPKEY (NCPCFM,SUM,SUMMARY)
$ETAB
SUBTTL SHOW/LIST MODULE LOADER/LOOPER Commands
SHW290: $KEYDSP (SHW291)
SHW291: $STAB ; SHOW/LIST MODULE LOADER/LOOPER selector table
NCPKEY (NCPCFM,STS,STATUS)
NCPKEY (NCPCFM,SUM,SUMMARY)
$ETAB
SHW400: NOD$ID (SHW192,,<SUMMARY>)
SHW410: $KEYDSP (SHW411,$DEFAULT(NODES)) ; ADJACENT NODES
SHW411: $STAB
NCPKEY (SHW412,NOD,NODES)
$ETAB
SHW412: $KEYDSP (SHW413,<$DEFAULT(SUMMARY)>)
SHW413: $STAB ; SHOW ADJACENT NODE node-id Keyword Table
NCPKEY (SHW414,CHR,CHARACTERISTICS)
NCPKEY (SHW414,CTR,COUNTERS)
NCPKEY (SHW414,STS,STATUS)
NCPKEY (SHW414,SUM,SUMMARY)
$ETAB
SHW414: $KEYDSP (SHW415,<$ALTERNATE(NCPCFM)>)
SHW415: $STAB ; SHOW ADJACENT NODES qualifier table
PARKEY (SHW416,A$NCKT,^D822,CIRCUIT)
PARKEY (SHW417,A$NKNW,^D822,KNOWN)
$ETAB
SHW416: CKT$ID (NCPCFM)
SHW417: $KEYDSP (SHW418,<$DEFAULT (CIRCUITS)>)
SHW418: $STAB
KNWKEY (NCPCFM,A$NKNC,^D0,CIRCUITS)
$ETAB
SHW420: $KEYDSP (SHW421) ; SHOW SIGNIFICANT selector table
SHW421: $STAB
NCPKEY (SHW422,CKT,CIRCUITS)
NCPKEY (SHW192,LIN,LINES)
NCPKEY (SHW192,MDL,MODULES)
NCPKEY (SHW192,NOD,NODES)
$ETAB
SHW422: $KEYDSP (SHW423,<$DEFAULT(SUMMARY)>)
SHW423: $STAB ; CIRCUITS selector table
NCPKEY (SHW424,CHR,CHARACTERISTICS)
NCPKEY (SHW424,CTR,COUNTERS)
NCPKEY (SHW424,STS,STATUS)
NCPKEY (SHW424,SUM,SUMMARY)
$ETAB
SHW424: $KEYDSP (SHW425,<$ALTERNATE(NCPCFM)>)
SHW425: $STAB ; CIRCUITS qualifier table
PARKEY (SHW426,C$CADJ,^D800,ADJACENT)
$ETAB
SHW426: $KEYDSP (SHW427,<$DEFAULT(NODE)>)
SHW427: $STAB
PARKEY (SHW428,C$CNOD,^D0,NODE)
$ETAB
SHW428: NOD$ID (NCPCFM)
SUBTTL SHOW LOGGING SINK sink-type Commands
SHW500: $KEYDSP (SHW510,<$DEFAULT(SUMMARY)>)
SHW510: $STAB ; LOGGING entities keyword table
NCPKEY (SHW530,CHR,CHARACTERISTICS)
NCPKEY (SHW530,EVT,EVENTS)
NCPKEY (SHW530,STS,STATUS)
NCPKEY (SHW530,SUM,SUMMARY)
$ETAB
SHW530: $KEYDSP (SHW540,<$ALTERNATE(NCPCFM)>)
SHW540: $STAB ; Qualifier Keyword Table
PARKEY (SHW550,E$SKNW,^D200,KNOWN)
PARKEY (SHW570,E$PSNK,^D200,SINK)
$ETAB
SHW550: $KEYDSP (SHW560,<$DEFAULT(SINKS)>)
SHW560: $STAB ; KNOWN Qualifier Keyword Table
KNWKEY (NCPCFM,E$SSNK,^D000,SINKS)
$ETAB
SHW570: $KEYDSP (SHW580,<$DEFAULT(NODE)>)
SHW580: $STAB ; SINK Qualifier Keyword Table
PARKEY (SHW590,E$SNOD,^D000,NODE)
$ETAB
SHW590: NOD$ID (NCPCFM) ; SINK NODE node-id
SUBTTL SET and DEFINE Commands
SETFDB: $KEYDSP (SET001)
SET001: $STAB
NCPKEY (SET100,CKT,CIRCUIT)
NCPKEY (SET300,XTR,EXECUTOR)
NCPKEY (SET400,KNW,KNOWN)
NCPKEY (SET200,LIN,LINE)
NCPKEY (SET500,LGG,LOGGING)
NCPKEY (SET600,MDL,MODULE)
NCPKEY (SET900,NOD,NODE)
$ETAB
SUBTTL SET/DEFINE CIRCUIT Command
SET100: CKT$ID (SET102) ; CIRCUIT ckt-id
SET102: $KEYDSP (SETX90,<$ALTERNATE(SET105)>)
SET105: $KEYDSP (SET107,<$ALTERNATE(SET190)>)
SET107: $STAB ; CIRCUIT Parameter Keyword Table
PARKEY (SET150,C$PACT,^D1150,ACTIVE)
PARKEY (SET147,C$PBAB,^D1141,BABBLE)
PARKEY (SET110,C$PBKG,^D0910,BLOCKING)
PARKEY (SET115,C$PCHN,^D1121,CHANNEL)
PARKEY (SET125,C$PCST,^D0900,COST)
PARKEY (SET130,C$PCTR,^D0110,COUNTER)
PARKEY (SET154,C$PDEA,^D1156,DEAD)
PARKEY (SET133,C$PDTE,^D1120,DTE)
PARKEY (SET152,C$PDYI,^D1155,DYING)
PARKEY (SET130,C$PHEL,^D0906,HELLO)
PARKEY (SET152,C$PINA,^D1152,INACTIVE)
PARKEY (SET120,C$PLIN,^D1110,LINE)
PARKEY (SET130,C$PLSN,^D0907,LISTEN)
PARKEY (SET135,C$PMAX,^D0000,MAXIMUM)
PARKEY (SET134,C$PNBR,^D0930,NUMBER)
PARKEY (SET160,C$POWR,^D1100,OWNER)
PARKEY (SET161,C$PPST,^D1010,POLLING)
PARKEY (SET130,C$PRCL,^D0921,RECALL)
PARKEY (SET19A,C$PRTP,^D0902,ROUTER)
PARKEY (SET110,C$PSVC,^D0100,SERVICE)
PARKEY (SET165,C$PSTT,^D0000,STATE)
PARKEY (SET147,C$PTRA,^D1142,TRANSMIT)
PARKEY (SET175,C$PTRB,^D1140,TRIBUTARY)
PARKEY (SET180,C$PTYP,^D1112,TYPE)
PARKEY (SET185,C$PUSG,^D1111,USAGE)
$ETAB
SET110: $KEYDSP (SET111)
SET111: $STAB ; BLOCKING/SERVICE Keyword Table
VALKEY (SET199,C$SDBD,^D1,DISABLED)
VALKEY (SET199,C$SEBD,^D0,ENABLED)
$ETAB
SET115: $NUMBER (SET199,<^D10>,<X25 Logical Channel Number>)
SET120: LINE$ID (SET199)
SET125: $NUMBER (SET199,<^D10>,<Routing Cost, 1 to 25 Decimal>)
SET130: $KEYDSP (SET131,<$DEFAULT(TIMER)>)
SET131: $STAB
PARKEY (SET132,C$STMR,^D0000,TIMER)
$ETAB
SET132: $NUMBER (SET199,<^D10>,<Seconds>)
SET133: DTE$ADR (SET199) ; DTE dte-address
SET134: CALL$NUMBER (SET199)
SET135: $KEYDSP (SET136)
SET136: $STAB ; MAXIMUM Keyword Table
PARKEY (SET140,C$MBUF,^D1145,BUFFERS)
PARKEY (SET137,C$MBLK,^D1122,DATA)
PARKEY (SET138,C$MRCL,^D0920,RECALLS)
PARKEY (SET14A,C$MROU,^D0901,ROUTERS)
PARKEY (SET143,C$MTRA,^D1146,TRANSMITS)
PARKEY (SET139,C$MWDW,^D1123,WINDOW)
$ETAB
SET137: $NUMBER (SET199,<^D10>,<Byte Count>)
SET138: $NUMBER (SET199,<^D10>,<Retry Count>)
SET139: $NUMBER (SET199,<^D10>,<Block Count>)
SET140: $KEYDSP (SET141,<$ALTERNATE(SET142)>)
SET141: $STAB ; MAXIMUM BUFFERS Keyword table
VALKEY (SET199,C$CBFU,^D255,UNLIMITED)
$ETAB
SET142: $NUMBER (SET199,<^D10>,<Receive Buffer Count>)
SET143: $NUMBER (SET199,<^D10>,<Data Message Count>)
SET147: $KEYDSP (SET148,<$DEFAULT(TIMER)>)
SET148: $STAB
PARKEY (SET149,C$CTMR,^D0000,TIMER)
$ETAB
SET149: $NUMBER (SET199,<^D10>,<Milliseconds>)
SET14A: $NUMBER (SET199,<^D10>)
SET150: $KEYDSP (SET151)
SET151: $STAB ; ACTIVE Keyword Table
PARKEY (SET157,C$SBAS,,BASE)
PARKEY (SET158,C$SINC,,INCREMENT)
$ETAB
SET152: $KEYDSP (SET153)
SET153: $STAB ; INACTIVE, DYING Keyword Table
PARKEY (SET157,C$SBAS,,BASE)
PARKEY (SET158,C$SINC,,INCREMENT)
PARKEY (SET159,C$STHR,,THRESHOLD)
$ETAB
SET154: $KEYDSP (SET155)
SET155: $STAB ; DEAD Keyword Table
PARKEY (SET159,C$STHR,,THRESHOLD)
$ETAB
SET157: $NUMBER (SET199,<^D10>,<Base Priority>)
SET158: $NUMBER (SET199,<^D10>,<Priority Increment>)
SET159: $NUMBER (SET199,<^D10>,<Priority Threshold>)
SET160: $FIELD (SET199,<Circuit Owner Identifier>)
SET161: $KEYDSP (SET162,<$DEFAULT(STATE)>)
SET162: $STAB ; POLLING Keyword Table
PARKEY (SET163,C$SPST,^D0000,STATE)
$ETAB
SET163: $KEYDSP (SET164)
SET164: $STAB ; POLLING STATE Keyword Table
VALKEY (SET199,C$SACT,^D1,ACTIVE)
VALKEY (SET199,C$SAUT,^D0,AUTOMATIC)
VALKEY (SET199,C$SDEA,^D4,DEAD)
VALKEY (SET199,C$SDYI,^D3,DYING)
VALKEY (SET199,C$SINA,^D2,INACTIVE)
$ETAB
SET165: $KEYDSP (SET166)
SET166: $STAB ; STATE Keyword Table
VALKEY (SET199,C$SOFF,^D1,OFF)
VALKEY (SET199,C$SON,^D0,ON)
VALKEY (SET199,C$SSVC,^D2,SERVICE)
$ETAB
SET170: SUB$ADDR (SET199)
SET175: $NUMBER (SET199,<^D10>,<Physical Tributary Address>)
SET180: $KEYDSP (SET181)
SET181: $STAB ; TYPE Keyword Table
PARKEY (SED181,C$TDDC,0,DDCMP)
VALKEY (SET199,C$TX25,^D3,X25)
$ETAB
SED181: $KEYDSP(SEE182)
SEE182: $STAB
VALKEY (SET199,C$TDCT,^D1,CONTROL)
VALKEY (SET199,C$TDDM,^D4,DMC)
VALKEY (SET199,C$TDPT,^D0,POINT)
VALKEY (SET199,C$TDTR,^D2,TRIBUTARY)
$ETAB
SET185: $KEYDSP (SET186)
SET186: $STAB ; USAGE Keyword Table
VALKEY (SET199,C$UICG,^D1,INCOMING)
VALKEY (SET199,C$UOTG,^D2,OUTGOING)
VALKEY (SET199,C$UPMT,^D0,PERMANENT)
$ETAB
SET190: $KEYDSP (SET191,<$FLAGS(CM%SDH)>)
SET191: $STAB ; NODE TYPE (in house command)
PARKEY (SET192,C$PNOD,^D2600,NODE)
$ETAB
SET192: $KEYDSP (SET193,<$DEFAULT(TYPE),$FLAGS(CM%SDH)>)
SET193: $STAB
PARKEY (SET194,C$NTYP,^D0000,TYPE)
$ETAB
SET194: $KEYDSP (SET195,<$FLAGS(CM%SDH)>)
SET195: $STAB
VALKEY (SET199,C$TPII,^D2,PHASE-II)
VALKEY (SET199,C$TRTG,^D0,ROUTING)
$ETAB
SET199: $CRLF (<$ALTERNATE(SET105)>) ; CIRCUIT parameters...
SET19A: $KEYDSP (SET19B,<$DEFAULT(PRIORITY)>)
SET19B: $STAB
PARKEY (SET19C,C$RPRI,^D0000,PRIORITY)
$ETAB
SET19C: $NUMBER (SET199,<^D10>)
SUBTTL SET/DEFINE LINE Command
SET200: LINE$ID (SET202) ; LINE Line-id
SET202: $KEYDSP (SETX90,<$ALTERNATE(SET205)>)
SET205: $KEYDSP (SET207)
SET207: $STAB ; LINE Parameter Keyword Table
PARKEY (SET210,L$PCLK,^D1113,CLOCK)
PARKEY (SET212,L$PCTL,^D1110,CONTROLLER)
PARKEY (SET250,L$PCTR,^D0110,COUNTER)
PARKEY (SET235,L$PDEA,^D1151,DEAD)
PARKEY (SET235,L$PDEL,^D1152,DELAY)
PARKEY (SET215,L$PDVC,^D1100,DEVICE)
PARKEY (SET220,L$PDPX,^D1111,DUPLEX)
PARKEY (SET250,L$PHBK,^D1122,HOLDBACK)
PARKEY (SET225,L$PMAX,^D0000,MAXIMUM)
PARKEY (SET230,L$PPRO,^D1112,PROTOCOL)
PARKEY (SET232,L$PREC,^D1105,RECEIVE)
PARKEY (SET235,L$PRTR,^D1121,RETRANSMIT)
PARKEY (SET235,L$PSCH,^D1150,SCHEDULING)
PARKEY (SET240,L$PSVC,^D0100,SERVICE)
PARKEY (SET245,L$PSTT,^D0000,STATE)
PARKEY (SET235,L$PSTR,^D1154,STREAM)
$ETAB
SET210: $KEYDSP (SET211)
SET211: $STAB ; CLOCK Keyword Table
VALKEY (SET299,L$CEXT,^D0,EXTERNAL)
VALKEY (SET299,L$CINT,^D1,INTERNAL)
$ETAB
SET212: $KEYDSP (SET213)
SET213: $STAB ; CONTROLLER Keyword Table
VALKEY (SET299,L$CLBK,^D1,LOOPBACK)
VALKEY (SET299,L$CNML,^D0,NORMAL)
$ETAB
SET215: DEV$ID (SET299)
SET220: $KEYDSP (SET221)
SET221: $STAB ; DUPLEX Keyword Table
VALKEY (SET299,L$DFLL,^D0,FULL)
VALKEY (SET299,L$DHLF,^D1,HALF)
$ETAB
SET225: $KEYDSP (SET226)
SET226: $STAB ; MAXIMUM Keyword Table
PARKEY (SET227,L$MBLK,^D1130,BLOCK)
PARKEY (SET228,L$MRTR,^D1131,RETRANSMITS)
PARKEY (SET229,L$MWDW,^D1132,WINDOW)
$ETAB
SET227: $NUMBER (SET299,<^D10>,<Byte Count>)
SET228: $NUMBER (SET299,<^D10>,<Block Count>)
SET229: $NUMBER (SET299,<^D10>,<Block Count>)
SET230: $KEYDSP (SET231)
SET231: $STAB ; PROTOCOL Keyword Table
PARKEY (SED231,L$PDDC,0,DDCMP)
VALKEY (SET299,L$PLPB,^D5,LAPB)
$ETAB
SED231: $KEYDSP(SEE231)
SEE231: $STAB
VALKEY (SET299,L$PMDD,^D1,CONTROL)
VALKEY (SET299,L$PDDD,^D4,DMC)
VALKEY (SET299,L$PPDD,^D0,POINT)
VALKEY (SET299,L$PTDD,^D2,TRIBUTARY)
$ETAB
SET232: $KEYDSP (SET233,<$DEFAULT(BUFFERS)>)
SET233: $STAB
PARKEY (SET234,L$CTMR,^D0000,BUFFERS)
$ETAB
SET234: $NUMBER (SET299,<^D10>,<Buffer count>)
SET235: $KEYDSP (SET236,<$DEFAULT(TIMER)>)
SET236: $STAB
PARKEY (SET238,L$CTMR,^D0000,TIMER)
$ETAB
SET238: $NUMBER (SET299,<^D10>,<Milliseconds>)
SET240: $KEYDSP (SET241)
SET241: $STAB ; SERVICE Keyword Table
VALKEY (SET299,L$SDBD,^D1,DISABLED)
VALKEY (SET299,L$SEBD,^D0,ENABLED)
PARKEY (SET238,L$STMR,<^D1120-L$PSVC>,TIMER)
$ETAB
SET245: $KEYDSP (SET246)
SET246: $STAB ; STATE Keyword Table
VALKEY (SET299,L$SOFF,^D1,OFF)
VALKEY (SET299,L$SON,^D0,ON)
VALKEY (SET299,L$SSVC,^D2,SERVICE)
$ETAB
SET250: $KEYDSP (SET251,<$DEFAULT(TIMER)>)
SET251: $STAB
PARKEY (SET252,L$RTMR,^D0000,TIMER)
$ETAB
SET252: $NUMBER (SET299,<^D10>,<Seconds>)
SET299: $CRLF (<$ALTERNATE(SET205)>)
SUBTTL SET/DEFINE EXECUTOR Command
SET300: $KEYDSP (SETX90,<$ALTERNATE(SET305)>)
SET305: $KEYDSP (SET310,<$ALTERNATE(SET306),$DEFAULT(NODE)>)
SET310: $STAB ; EXECUTOR Keyword Table
PARKEY (SET315,N$XNOD,,NODE) ; Dummy parameter value for our use
$ETAB
SET306: $KEYDSP (SETX92,<$ALTERNATE(SET903)>)
SET315: NOD$ID (SET317) ; Node id
SET317: $KEYDSP (SET318,<$ALTERNATE(NCPCFM)>)
SET318: $STAB ; Access Control Keyword Table
PARKEY (SET319,N$XACT,^D2502,ACCOUNT)
PARKEY (SET320,N$XPWD,^D2503,PASSWORD)
PARKEY (SET321,N$XUSR,^D2504,USER)
$ETAB
SET319: $FIELD (SET317,<Account String>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
SET320: $FIELD (SET317,<Access Password String>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
SET321: $FIELD (SET317,<User Name>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
SUBTTL SET/DEFINE KNOWN Command
SET400: $KEYDSP (SET410)
SET410: $STAB ; KNOWN Entities Keyword Table
NCPKEY (SET102,CKT,CIRCUITS)
NCPKEY (SET202,LIN,LINES)
NCPKEY (SET502,LGG,LOGGING)
NCPKEY (SET904,NOD,NODES)
$ETAB
SUBTTL SET/DEFINE LOGGING Command
SET500: $KEYDSP (SET501)
SET501: $STAB ; LOGGING sink-type Keyword Table
VALKEY (SET502,E$SCSL,^D1,CONSOLE)
VALKEY (SET502,E$SFIL,^D2,FILE)
VALKEY (SET502,E$SMTR,^D3,MONITOR)
$ETAB
SET502: $KEYDSP (SET506)
SET504: $KEYDSP (SET506,<$ALTERNATE(NCPCFM)>)
SET506: $STAB ; LOGGING parameter Keyword Table
PARKEY (NCPCFM,P$ALL,,ALL)
PARKEY (SET508,E$PEVT,^D201,EVENT)
PARKEY (SET510,E$PKNW,^D201,KNOWN)
PARKEY (SET560,E$PNAM,^D100,NAME)
PARKEY (SET570,E$PSTT,^D000,STATE)
$ETAB
SET508: EVLIST (SET520)
SET510: $KEYDSP (SET512,<$DEFAULT(EVENTS)>)
SET512: $STAB
KNWKEY (SET520,E$KEVT,^D0,EVENTS)
$ETAB
SET520: $KEYDSP (SET522,<$ALTERNATE(SET540)>)
SET522: $STAB ; Optional source-qual keyword table
PARKEY (SET53X,E$QARE,^D5,AREA)
PARKEY (SET524,E$QCKT,^D3,CIRCUIT)
PARKEY (SET526,E$QLIN,^D1,LINE)
PARKEY (SET528,E$QMDL,^D4,MODULE)
PARKEY (SET530,E$QNOD,^D0,NODE)
$ETAB
SET524: CKT$ID (SET540) ; CIRCUIT CKT-ID
SET526: LINE$ID (SET540) ; LINE line-id
SET528: $KEYDSP (SET529)
SET529: $STAB ; MODULE module-id Keyword Table
PARKEY (SET540,E$MCFG,\$KNCFG,CONFIGURATOR)
PARKEY (SET540,E$MCSL,\$KNCSL,CONSOLE)
PARKEY (SET540,E$MLOD,\$KNLDR,LOADER)
PARKEY (SET540,E$MLOP,\$KNLPR,LOOPER)
PARKEY (SET540,E$MXAC,\$KNXAC,X25-ACCESS)
PARKEY (SET540,E$MXPR,\$KNXPR,X25-PROTOCOL)
PARKEY (SET540,E$MXSV,\$KNXSV,X25-SERVER)
$ETAB
SET530: NOD$ID (SET540) ; NODE node-id
SET53X: $NUMBER (SET540,<^D10>,<AREA Number>)
SET540: $KEYDSP (SET542,<$ALTERNATE(NCPCFM)>)
SET542: $STAB ; Optional sink-node keyword table
PARKEY (SET544,E$PSNK,^D200,SINK)
$ETAB
SET544: $KEYDSP (SET546)
SET546: $STAB ; SINK Keyword Table
VALKEY (NCPCFM,E$SXTR,^D000,EXECUTOR)
PARKEY (SET548,E$SNOD,^D000,NODE)
$ETAB
SET548: NOD$ID (NCPCFM) ; SINK NODE node-id
SET560: $OFILE (NCPCFM,<Logging File Name>,<$ALTERNATE(SET562)>)
SET562: $DEV (NCPCFM,<$HELP(Console Device),$ALTERNATE(SET564)>)
SET564: $FIELD (NCPCFM,<Monitor Process Id>)
SET570: $KEYDSP (SET571)
SET571: $STAB
VALKEY (NCPCFM,E$SHLD,^D2,HOLD)
VALKEY (NCPCFM,E$SOFF,^D1,OFF)
VALKEY (NCPCFM,E$SON,^D0,ON)
$ETAB
SUBTTL SET/DEFINE MODULE Command
SET600: $KEYDSP (SET601)
SET601: $STAB ; MODULE module-id Keyword Table
NCPKEY (SET6C0,CFG,CONFIGURATOR)
NCPKEY (SET6A0,CSL,CONSOLE)
NCPKEY (SET6B0,LDR,LOADER)
NCPKEY (SET6B0,LPR,LOOPER)
NCPKEY (SET602,XAC,X25-ACCESS)
NCPKEY (SET630,XPR,X25-PROTOCOL)
NCPKEY (SET800,XSV,X25-SERVER)
$ETAB
SUBTTL SET/DEFINE MODULE X25-ACCESS Command
SET602: $KEYDSP (SET603,<$ALTERNATE(SET614)>)
SET603: $STAB ; MODULE X25-ACCESS parameter keyword table
PARKEY (SET604,X$AACT,^D332,ACCOUNT)
PARKEY (SET606,X$ANOD,^D320,NODE)
PARKEY (SET608,X$APWD,^D331,PASSWORD)
PARKEY (SET610,X$AUSR,^D330,USER)
$ETAB
SET604: $FIELD (SET612,<Account String>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
SET606: NOD$ID (SET612)
SET608: $FIELD (SET612,<Access Password>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
SET610: $FIELD (SET612,<User Name>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
SET612: $KEYDSP (SET603,<$ALTERNATE(SET616)>)
SET614: $KEYDSP (SET615)
SET615: $STAB
PARKEY (SET616,X$ALL,^D000,ALL)
$ETAB
SET616: $KEYDSP (SET617,<$ALTERNATE(NCPCFM)>)
SET617: $STAB ; X25-ACCESS Network Qualifier Keyword Table
PARKEY (SET618,X$AKNW,^D1110,KNOWN)
PARKEY (SET620,X$ANWK,^D1110,NETWORK)
$ETAB
SET618: $KEYDSP (SET619,<$DEFAULT(NETWORKS)>)
SET619: $STAB
KNWKEY (NCPCFM,X$KNWK,^D0000,NETWORKS)
$ETAB
SET620: NET$NAME (NCPCFM)
SUBTTL SET/DEFINE MODULE X25-PROTOCOL Command
SET630: $KEYDSP (SET631,<$ALTERNATE(SET650)>)
SET631: $STAB
PARKEY (SET632,X$PCLL,^D1160,CALL)
PARKEY (SET632,X$PCLR,^D1161,CLEAR)
PARKEY (SET636,X$PDFT,^D0000,DEFAULT)
PARKEY (SET642,X$PMAX,^D0000,MAXIMUM)
PARKEY (SET646,X$PNWK,^D1110,NETWORK)
PARKEY (SET632,X$PRST,^D1162,RESET)
PARKEY (SET632,X$PRTT,^D1163,RESTART)
$ETAB
SET632: $KEYDSP (SET633,<$DEFAULT(TIMER)>)
SET633: $STAB
PARKEY (SET634,X$PTMR,^D0000,TIMER)
$ETAB
SET634: $NUMBER (SET648,<^D10>,<Seconds>)
SET636: $KEYDSP (SET637)
SET637: $STAB
PARKEY (SET638,X$DBLK,^D1140,DATA)
PARKEY (SET640,X$DWDW,^D1141,WINDOW)
$ETAB
SET638: $NUMBER (SET648,<^D10>,<Byte Count>)
SET640: $NUMBER (SET648,<^D10>,<Block Count>)
SET642: $KEYDSP (SET643)
SET643: $STAB ; MAXIMUM Parameter Table
PARKEY (SET644,X$MCLR,^D1152,CLEARS)
PARKEY (SET638,X$MBLK,^D1150,DATA)
PARKEY (SET644,X$MRES,^D1153,RESETS)
PARKEY (SET644,X$MRST,^D1154,RESTARTS)
PARKEY (SET640,X$MWDW,^D1151,WINDOW)
$ETAB
SET644: $NUMBER (SET648,<^D10>,<Retry Count>)
SET646: $FIELD (SET648,<Network Name>)
SET648: $KEYDSP (SET631,<$ALTERNATE(SET649)>)
SET649: $KEYDSP (SET651,<$ALTERNATE(SET64A)>)
SET64A: $KEYDSP (SET671,<$ALTERNATE(NCPCFM)>)
SET650: $KEYDSP (SET651,<$ALTERNATE(SET670)>)
SET651: $STAB
PARKEY (SET652,X$PCHN,^D1130,CHANNELS)
PARKEY (SET654,X$PCTR,^D0100,COUNTER)
PARKEY (SET658,X$PLIN,^D1120,LINE)
PARKEY (SET660,X$PSTT,^D0000,STATE)
$ETAB
SET652: CHANNELS (SET662)
SET654: $KEYDSP (SET655,<$DEFAULT(TIMER)>)
SET655: $STAB
PARKEY (SET656,X$PTMR,^D0000,TIMER)
$ETAB
SET656: $NUMBER (SET662,<^D10>,<Seconds>)
SET658: LINE$ID (SET662)
SET660: $KEYDSP (SET661)
SET661: $STAB
VALKEY (SET662,X$SOFF,^D1,OFF)
VALKEY (SET662,X$SON,^D0,ON)
VALKEY (SET662,X$SSHT,^D2,SHUT)
$ETAB
SET662: $KEYDSP (SET651,<$ALTERNATE(SET664)>)
SET664: $KEYDSP (SET665,<$ALTERNATE(NCPCFM)>)
SET665: $STAB ; DTE qualifier table
PARKEY (SET666,X$PDTE,^D1100,DTE)
PARKEY (SET668,X$PKNW,^D1100,KNOWN)
$ETAB
SET666: DTE$ADR (NCPCFM)
SET668: $KEYDSP (SET669,<$DEFAULT(DTES)>)
SET669: $STAB
KNWKEY (NCPCFM,X$KDTE,^D0000,DTES)
$ETAB
SET670: $KEYDSP (SET671,<$ALTERNATE(SET686)>)
SET671: $STAB
PARKEY (SET672,X$PGRP,^D1101,GROUP)
$ETAB
SET672: $FIELD (SET674,<Group Name>)
SET674: $KEYDSP (SET675,<$DEFAULT(DTE)>)
SET675: $STAB ; GROUP Option Table
PARKEY (SET676,X$GDTE,^D1170,DTE)
$ETAB
SET676: DTE$ADR (SET678)
SET678: $KEYDSP (SET679,<$DEFAULT(NUMBER)>)
SET679: $STAB
PARKEY (SET680,X$GNBR,^D1171,NUMBER)
$ETAB
SET680: $NUMBER (SET682,<^D10>,<Group Number 0-9999>)
SET682: $KEYDSP (SET683,<$ALTERNATE(NCPCFM)>)
SET683: $STAB
PARKEY (SET684,X$GTYP,^D1172,TYPE)
$ETAB
SET684: $KEYDSP (SET685,<$DEFAULT(BILATERAL)>)
SET685: $STAB
VALKEY (NCPCFM,X$BLTR,^D1,BILATERAL)
$ETAB
SET686: $KEYDSP (SET687)
SET687: $STAB
PARKEY (SET688,X$ALL,^D0000,ALL)
$ETAB
SET688: $KEYDSP (SET689)
SET689: $STAB
PARKEY (SET690,X$PDTE,^D1100,DTE)
PARKEY (SET692,X$PGRP,^D1101,GROUP)
PARKEY (SET694,X$PKNW,^D1100,KNOWN)
$ETAB
SET690: DTE$ADR (NCPCFM)
SET692: $FIELD (NCPCFM,<Group Name>)
SET694: $KEYDSP (SET695)
SET695: $STAB
KNWKEY (NCPCFM,X$KDTE,^D0000,DTES)
KNWKEY (NCPCFM,X$KGRP,^D0001,GROUPS)
$ETAB
SUBTTL SET/DEFINE MODULE CONSOLE Commands
SET6A0: $KEYDSP (SET6A1,<$DEFAULT(RESERVATION)>)
SET6A1: $STAB ; SET/DEFINE MODULE CONSOLE selector table
PARKEY (SET6A2,C$SRES,^D110,RESERVATION)
$ETAB
SET6A2: $KEYDSP (SET6A3,<$DEFAULT(TIMER)>)
SET6A3: $STAB ; RESERVATION TIMER
PARKEY (SET6A4,C$STIM,^D0,TIMER)
$ETAB
SET6A4: $NUMBER (NCPCFM,^D10)
SUBTTL SET/DEFINE LOADER & LOOPER Commands
SET6B0: $KEYDSP (SET6B1,<$ALTERNATE(SET6B2),$DEFAULT(ALL)>)
SET6B1: $STAB ; ALL Keyword Dispatch Table
PARKEY (NCPCFM,P$ALL,,ALL)
$ETAB
SET6B2: $KEYDSP (SET6B3,<$DEFAULT(ASSISTANCE)>)
SET6B3: $STAB
PARKEY (SET6C7,L$DASS,^D10,ASSISTANCE)
$ETAB
SUBTTL SET/DEFINE MODULE CONFIGURATOR Commands
SET6C0: $KEYDSP (SET6C1,<$ALTERNATE(SET6C5)>)
SET6C1: $STAB
PARKEY (SET6C2,M$CCIR,^D100,CIRCUIT)
PARKEY (SET6C3,M$CKCR,^D100,KNOWN)
$ETAB
SET6C2: CKT$ID (SET6C5)
SET6C3: $KEYDSP (SET6C4,<$DEFAULT(CIRCUITS)>)
SET6C4: $STAB
KNWKEY (SET6C5,M$CKKC,^D0,CIRCUITS)
$ETAB
SET6C5: $KEYDSP (SET6C6)
SET6C6: $STAB ; SET/DEFINE MODULE CONFIGURATOR selector table
PARKEY (NCPCFM,X$ALL,^D0000,ALL)
PARKEY (SET6C7,C$FSUR,^D110,SURVEILLANCE)
$ETAB
SET6C7: $KEYDSP (SET6C8)
SET6C8: $STAB ; SURVEILLANCE/ASSISTANCE control
VALKEY (NCPCFM,M$DISB,^D1,DISABLED)
VALKEY (NCPCFM,M$ENAB,^D0,ENABLED)
$ETAB
SUBTTL SET/DEFINE MODULE X25-SERVER Command
SET800: $KEYDSP (SET801,<$ALTERNATE(SET830)>)
SET801: $STAB ; MODULE X25-SERVER destination options table
PARKEY (SET802,X$SACT,^D332,ACCOUNT)
PARKEY (SET804,X$SCLL,^D000,CALL)
PARKEY (SET810,X$SGRP,^D353,GROUP)
PARKEY (SET812,X$SNOD,^D320,NODE)
PARKEY (SET814,X$SNBR,^D354,NUMBER)
PARKEY (SET816,X$SOBJ,^D340,OBJECT)
PARKEY (SET818,X$SPWD,^D331,PASSWORD)
PARKEY (SET820,X$SPRI,^D350,PRIORITY)
PARKEY (SET822,X$SSUB,^D355,SUBADDRESSES)
PARKEY (SET824,X$SUSR,^D330,USER)
$ETAB
SET802: $FIELD (SET826,<Account String>)
SET804: $KEYDSP (SET805)
SET805: $STAB ; CALL parameter table
PARKEY (SET806,X$CMSK,^D351,MASK)
PARKEY (SET808,X$CVAL,^D352,VALUE)
$ETAB
SET806: $FIELD (SET826,<Hexadecimal Mask>,<$FLAGS(CM%BRK),$BREAK(HEXBRK)>)
SET808: $FIELD (SET826,<Hexadecimal Data>,<$FLAGS(CM%BRK),$BREAK(HEXBRK)>)
SET810: $FIELD (SET826,<Group Name>)
SET812: NOD$ID (SET826)
SET814: CALL$NUMBER (SET826)
SET816: OBJECT$ID (SET826)
SET818: $FIELD (SET826,<Access Password>)
SET820: $NUMBER (SET826,<^D10>,<Priority Number 0-255>)
SET822: SUB$ADDR (SET826)
SET824: $FIELD (SET826,<User Name>)
SET826: $KEYDSP (SET801,<$ALTERNATE(SET850)>)
SET828: $KEYDSP (SET831,<$ALTERNATE(NCPCFM)>)
SET830: $KEYDSP (SET831,<$ALTERNATE(SET844)>)
SET831: $STAB ; MODULE X25-SERVER parameter table
PARKEY (SET832,X$SCTR,^D0100,COUNTER)
PARKEY (SET836,X$SMAX,^D0000,MAXIMUM)
$ETAB
SET832: $KEYDSP (SET833,<$DEFAULT(TIMER)>)
SET833: $STAB ; COUNTER TIMER parameter
PARKEY (SET834,X$PTMR,^D0000,TIMER)
$ETAB
SET834: $NUMBER (SET840,<^D10>,<Seconds>)
SET836: $KEYDSP (SET837,<$DEFAULT(CIRCUITS)>)
SET837: $STAB ; MAXIMUM CIRCUITS parameter
PARKEY (SET838,X$SCKT,^D0310,CIRCUITS)
$ETAB
SET838: $NUMBER (SET840,<^D10>,<Count>)
SET840: $KEYDSP (SET801,<$ALTERNATE(SET828)>)
SET844: $KEYDSP (SET845)
SET845: $STAB
PARKEY (SET850,X$ALL,^D0000,ALL)
$ETAB
SET850: $KEYDSP (SET851,<$ALTERNATE(NCPCFM)>)
SET851: $STAB
PARKEY (SET852,X$SDST,^D300,DESTINATION)
PARKEY (SET854,X$SKNW,^D300,KNOWN)
$ETAB
SET852: DEST$NAME (NCPCFM)
SET854: $KEYDSP (SET855,<$DEFAULT(DESTINATIONS)>)
SET855: $STAB
KNWKEY (NCPCFM,X$KDST,^D000,DESTINATIONS)
$ETAB
SUBTTL SET/ DEFINE NODE Command
SET900: NOD$NUMBER (SET904,SET901,<ALL>) ; NODE node-address
SET901: NOD$NAME (SET902) ; NODE node-name
SET902: $KEYDSP (SETX90,<$ALTERNATE(SET903),$DEFAULT(ALL)>)
SET903: $KEYDSP (SETX91,<$ALTERNATE(SET906)>)
SET904: $KEYDSP (SETX90,<$ALTERNATE(SET905),$DEFAULT(ALL)>)
SET905: $KEYDSP (SETX92,<$ALTERNATE(SET906),$DEFAULT(NAME)>)
SET906: $KEYDSP (SET907,<$ALTERNATE(SET908)>)
SET907: $STAB ; NODE Parameter Keyword Table
PARKEY (SET9Y0,N$PARE,^D928,AREA)
PARKEY (SET9T0,N$PBRD,^D912,BROADCAST)
PARKEY (SET915,N$PBFR,^D000,BUFFER)
PARKEY (SET9W0,N$PCON,^D000,CONSOLE)
PARKEY (SET910,N$PCTR,^D160,COUNTER)
PARKEY (SET920,N$PCPU,^D113,CPU)
PARKEY (SET925,N$PDLY,^D000,DELAY)
PARKEY (SET9Z0,N$PDIA,^D123,DIAGNOSTIC)
PARKEY (SET930,N$PDMP,^D000,DUMP)
PARKEY (SET9A0,N$PHRD,^D114,HARDWARE)
PARKEY (SET950,N$PHST,^D141,HOST)
PARKEY (SET955,N$PIDN,^D100,IDENTIFICATION)
PARKEY (SET910,N$PITY,^D722,INACTIVITY)
PARKEY (SET910,N$PICG,^D510,INCOMING)
PARKEY (SET960,N$PLOD,^D120,LOAD)
PARKEY (SET965,N$PMAX,^D000,MAXIMUM)
PARKEY (SET910,N$POTG,^D511,OUTGOING)
PARKEY (SET970,N$PRTR,^D723,RETRANSMIT)
PARKEY (SET910,N$PRTG,^D910,ROUTING)
PARKEY (SET975,N$PSDY,^D000,SECONDARY)
PARKEY (SET9B0,N$PSEG,^D932,SEGMENT)
PARKEY (SET980,N$PSVC,^D000,SERVICE)
PARKEY (SET985,N$PSWR,^D000,SOFTWARE)
PARKEY (SET990,N$PSTT,^D000,STATE)
PARKEY (SET993,N$PSUB,^D911,SUBADDRESSES)
PARKEY (SET995,N$PTRT,^D000,TERTIARY)
PARKEY (SETX05,N$PTYP,^D901,TYPE)
$ETAB
SET908: $KEYDSP (SET909,<$FLAGS(CM%SDH)>)
SET909: $STAB ; FENCE (in house command)
PARKEY (SETX93,N$PFEN,^D2500,FENCE,CM%INV)
$ETAB
SET910: $KEYDSP (SET911,<$DEFAULT(TIMER)>)
SET911: $STAB
PARKEY (SET912,N$PTMR,^D000,TIMER)
$ETAB
SET912: $NUMBER (SETX99,<^D10>,<Seconds>)
SET9T0: $KEYDSP (SET9T1,<$DEFAULT(ROUTING)>)
SET9T1: $STAB
PARKEY (SET910,N$PBRT,^D000,ROUTING)
$ETAB
SET915: $KEYDSP (SET916,<$DEFAULT(SIZE)>)
SET916: $STAB
PARKEY (SET918,N$BSIZ,^D931,SIZE)
$ETAB
SET918: $NUMBER (SETX99,<^D10>,<Bytes>)
SET920: $KEYDSP (SET921)
SET921: $STAB ; CPU-type keyword table
VALKEY (SETX99,N$D10,^D2,DECSYSTEM-1020)
VALKEY (SETX99,N$P11,^D1,PDP-11)
VALKEY (SETX99,N$P08,^D0,PDP-8)
VALKEY (SETX99,N$VAX,^D3,VAX-11)
$ETAB
SET925: $KEYDSP (SET926)
SET926: $STAB
PARKEY (SET928,N$DFTR,^D720,FACTOR)
PARKEY (SET928,N$DWHT,^D721,WEIGHT)
$ETAB
SET928: $NUMBER (SETX99,<^D10>)
SET930: $KEYDSP (SET931)
SET931: $STAB
PARKEY (SET935,N$DADR,^D135,ADDRESS)
PARKEY (SET940,N$DCNT,^D136,COUNT)
PARKEY (SET945,N$DFIL,^D130,FILE)
$ETAB
SET935: $NUMBER (SETX99,<^D8>,<Octal Beginning Dump Address>)
SET940: $NUMBER (SETX99,<^D10>,<Decimal Number of Words to Dump>)
SET945: SETFIL (SETX99)
SET950: NOD$ID (SETX99)
SET955: STR$ID (SETX99,<Executor Node Identification>)
SET960: $KEYDSP (SET961,<$DEFAULT(FILE)>)
SET961: $STAB
PARKEY (SET963,N$LFIL,^D000,FILE)
$ETAB
SET963: SETFIL (SETX99)
SET965: $KEYDSP (SET966)
SET966: $STAB
PARKEY (SET967,N$MADR,^D920,ADDRESS)
PARKEY (SET968,N$MARE,^D925,AREA)
PARKEY (SET969,N$MBRO,^D926,BROADCAST)
PARKEY (SET968,N$MBFR,^D930,BUFFERS)
PARKEY (SET968,N$MCKT,^D921,CIRCUITS)
PARKEY (SET968,N$MCST,^D922,COST)
PARKEY (SET968,N$MHPS,^D923,HOPS)
PARKEY (SET968,N$MLKS,^D710,LINKS)
PARKEY (SET968,N$MVST,^D924,VISITS)
$ETAB
SET967: NOD$NUMBER (SETX99)
SET968: $NUMBER (SETX99,<^D10>)
SET969: $KEYDSP (SET96A)
SET96A: $STAB
PARKEY (SET968,N$MBNR,^D0,NONROUTERS)
PARKEY (SET968,N$MBBR,^D1,ROUTERS)
$ETAB
SET970: $KEYDSP (SET971,<$DEFAULT(FACTOR)>)
SET971: $STAB
PARKEY (SET968,N$RFTR,^D000,FACTOR)
$ETAB
SET975: $KEYDSP (SET976)
SET976: $STAB
PARKEY (SET978,N$SDPR,^D131,DUMPER)
PARKEY (SET978,N$SLDR,^D121,LOADER)
$ETAB
SET978: SETFIL (SETX99)
SET980: $KEYDSP (SET981)
SET981: $STAB
PARKEY (SET982,N$SCKT,^D110,CIRCUIT)
PARKEY (SET983,N$SDVC,^D112,DEVICE)
PARKEY (SET98A,N$SNOD,^D115,NODE)
PARKEY (SET984,N$SPWD,^D111,PASSWORD)
$ETAB
SET982: CKT$ID (SETX99)
SET983: DEV$TYPE (SETX99)
SET98A: $KEYDSP (SET98B,<$DEFAULT(VERSION)>)
SET98B: $STAB
PARKEY (SET98C,N$NVER,^D000,VERSION)
$ETAB
SET98C: $NUMBER (SETX99,<^D10>)
SET984: SVC$PASSWORD (SETX99)
SET985: $KEYDSP (SET986)
SET986: $STAB
PARKEY (SET989,N$SIDN,^D126,IDENTIFICATION)
PARKEY (SET987,N$STYP,^D125,TYPE)
$ETAB
SET987: $KEYDSP (SET988)
SET988: $STAB
VALKEY (SETX99,N$SSLD,^D0,SECONDARY-LOADER)
VALKEY (SETX99,N$SSYS,^D2,SYSTEM)
VALKEY (SETX99,N$STLD,^D1,TERTIARY-LOADER)
$ETAB
SET989: STR$ID (SETX99,<Software Identification>)
SET990: $KEYDSP (SET991)
SET991: $STAB
VALKEY (SETX99,N$SOFF,^D1,OFF)
VALKEY (SETX99,N$SON,^D0,ON)
VALKEY (SETX99,N$SRTD,^D3,RESTRICTED)
VALKEY (SETX99,N$SSHT,^D2,SHUT)
$ETAB
SET993: SUB$ADDR (SETX99)
SET995: $KEYDSP (SET996,<$DEFAULT(LOADER)>)
SET996: $STAB
PARKEY (SET978,N$TLDR,^D122,LOADER)
$ETAB
SET9W0: $KEYDSP (SET9W1)
SET9W1: $STAB
PARKEY (SET9W4,N$CLOD,^D000,LOAD)
PARKEY (SET9W2,N$CSEC,^D000,SECONDARY)
$ETAB
SET9W2: $KEYDSP (SET9W3,<$DEFAULT(LOADER)>)
SET9W3: $STAB
PARKEY (SET978,N$CSLD,^D2511,LOADER)
$ETAB
SET9W4: $KEYDSP (SET9W5,<$DEFAULT(FILE)>)
SET9W5: $STAB
PARKEY (SET978,N$CLDF,^D2512,FILE)
$ETAB
SETX05: $KEYDSP (SETX06)
SETX06: $STAB
VALKEY (SETX99,N$TNAR,^D3,AREA-ROUTER)
VALKEY (SETX99,N$TNNR,^D1,NONROUTING-III)
VALKEY (SETX99,N$TNN4,^D5,NONROUTING-IV)
; VALKEY (SETX99,N$TPII,^D2,PHASE-II)
VALKEY (SETX99,N$TRTG,^D0,ROUTING-III)
VALKEY (SETX99,N$TRT4,^D4,ROUTING-IV)
$ETAB
SETX90: $STAB ; Clear VAL$KY so not confused with parameter
PARKEY (NCPCFM,P$ALL,VAL$KY^!777777,ALL) ; value keyword
$ETAB
SETX91: $STAB ; NODE ADDRESS Keyword Table
PARKEY (SETX93,N$PADR,^D0502,ADDRESS)
PARKEY (SETX94,N$PCKT,^D0501,CIRCUIT)
$ETAB
SETX92: $STAB ; NODE NAME Keyword Table
PARKEY (SETX95,N$PNAM,^D0500,NAME)
$ETAB
SETX93: NOD$NUMBER (NCPCFM)
SETX94: CKT$ID (NCPCFM)
SETX95: NOD$NAME (NCPCFM)
SETX99: $CRLF (<$ALTERNATE(SET906)>)
;SET NODE x AREA
SET9Y0: $KEYDSP (SET9Y1,<$DEFAULT(MAXIMUM)>)
SET9Y1: $STAB
PARKEY (SET9Y2,N$PAR1,^D0,MAXIMUM)
$ETAB
SET9Y2: $KEYDSP (SET9Y3)
SET9Y3: $STAB
PARKEY (SET9Y4,N$PARC,^D0,COST)
PARKEY (SET9Y4,N$PARH,^D1,HOPS)
$ETAB
SET9Y4: $NUMBER (SETX99,<^D10>)
;SET NODE x DIAGNOSTIC
SET9Z0: $KEYDSP (SET9Z1,<$DEFAULT(FILE)>)
SET9Z1: $STAB
PARKEY (SET9Z2,N$PDI1,^D0,FILE)
$ETAB
SET9Z2: SETFIL (SETX99)
;SET NODE x HARDWARE
SET9A0: $KEYDSP (SET9A1,<$DEFAULT(ADDRESS)>)
SET9A1: $STAB
PARKEY (SET9A2,N$PHR1,^D0,ADDRESS)
$ETAB
SET9A2: NI$ADDRESS (SETX99)
;SET NODE x SEGMENT
SET9B0: $KEYDSP (SET9B1,<$DEFAULT(BUFFER)>)
SET9B1: $STAB
PARKEY (SET9B2,N$PSE1,^D0,BUFFER)
$ETAB
SET9B2: $KEYDSP (SET9B3,<$DEFAULT(SIZE)>)
SET9B3: $STAB
PARKEY (SET9B4,N$PSE2,^D0,SIZE)
$ETAB
SET9B4: $NUMBER (SETX99,<^D10>,<Bytes>)
SUBTTL TELL Command Prefix
TELFDB: NOD$ID (TEL130) ; NODE node-id
TEL130: $KEYDSP (TEL140,<$ALTERNATE(TEL170)>)
TEL140: $STAB ; TELL access control keyword table
PARKEY (TEL150,N$XACT,,ACCOUNT)
PARKEY (TEL155,N$XPWD,,PASSWORD)
PARKEY (TEL160,N$XUSR,,USER)
$ETAB
TEL150: $FIELD (TEL130,<Account String>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
TEL155: $FIELD (TEL130,<Password String>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
TEL160: $FIELD (TEL130,<User Name>,<$FLAGS(CM%BRK),$BREAK(LITBRK)>)
TEL170: $KEYDSP (TEL172)
TEL172: $STAB ; NCP Command Keyword Table
NCPKEY (CANFDB,CAN,CANCEL)
NCPKEY (CLRFDB,CLR,CLEAR)
NCPKEY (SETFDB,DEF,DEFINE)
NCPKEY (DMPFDB,DMP,DUMP)
NCPKEY (HLPFDB,HLP,HELP)
NCPKEY (SHWFDB,LST,LIST)
NCPKEY (LODFDB,LOD,LOAD)
NCPKEY (LOPFDB,LOP,LOOP)
NCPKEY (CLRFDB,PUR,PURGE)
NCPKEY (SETFDB,SET,SET)
NCPKEY (SHWFDB,SHW,SHOW)
NCPKEY (TRGFDB,TRG,TRIGGER)
NCPKEY (ZERFDB,ZRO,ZERO)
$ETAB
SUBTTL TRIGGER Command
TRGFDB: $KEYDSP (TRG100)
TRG100: $STAB ; TRIGGER Command Entity Keyword Table
NCPKEY (TRG200,NOD,NODE)
NCPKEY (TRG300,VIA,VIA)
$ETAB
TRG200: NOD$ID (TRG210) ; Node name or number
TRG210: $KEYDSP (TRG220,<$ALTERNATE(NCPCFM)>)
TRG220: $STAB ; TRIGGER command entity parameter table
PARKEY (TRG230,N$SPWD,,PASSWORD)
PARKEY (TRG270,N$LPHY,,PHYSICAL)
PARKEY (TRG240,N$PSVC,,SERVICE)
PARKEY (TRG260,N$SCKT,,VIA)
$ETAB
TRG230: SVC$PASSWORD (TRG210)
TRG240: $KEYDSP (TRG250,<$DEFAULT(PASSWORD)>)
TRG250: $STAB
PARKEY (TRG230,N$SPWD,,PASSWORD)
$ETAB
TRG260: CKT$ID (NCPCFM) ; TRIGGER NODE node-id VIA ckt-id
TRG270: $KEYDSP (TRG271,<$DEFAULT(ADDRESS)>)
TRG271: $STAB
PARKEY (TRG272,N$LPHA,,ADDRESS)
$ETAB
TRG272: NI$ADDRESS (TRG210)
TRG300: CKT$ID (TRG310) ; TRIGGER VIA ckt-id
TRG310: $KEYDSP (TRG320,<$ALTERNATE(NCPCFM)>)
TRG320: $STAB
PARKEY (TRG330,N$SPWD,,PASSWORD)
PARKEY (TRG360,N$LPHA,,PHYSICAL)
PARKEY (TRG340,N$PSVC,,SERVICE)
$ETAB
TRG330: SVC$PASSWORD (TRG310)
TRG340: $KEYDSP (TRG350,<$DEFAULT(PASSWORD)>)
TRG350: $STAB
PARKEY (TRG330,N$SPWD,,PASSWORD)
$ETAB
TRG360: $KEYDSP (TRG361,<$DEFAULT(ADDRESS)>)
TRG361: $STAB
PARKEY (TRG362,N$LPHA,,ADDRESS)
$ETAB
TRG362: NI$ADDRESS (TRG310)
SUBTTL ZERO Command
ZERFDB: $KEYDSP (ZER100)
ZER100: $STAB ; ZERO Command Entity Keyword Table
NCPKEY (ZER110,CKT,CIRCUIT)
NCPKEY (ZER210,XTR,EXECUTOR)
NCPKEY (ZER130,KNW,KNOWN)
NCPKEY (ZER120,LIN,LINE)
NCPKEY (ZER150,MDL,MODULE)
NCPKEY (ZER170,NOD,NODE)
$ETAB
ZER110: CKT$ID (ZER210) ; CIRCUIT ckt-id
ZER120: LINE$ID (ZER210) ; LINE line-id
ZER130: $KEYDSP (ZER140)
ZER140: $STAB ; KNOWN Entities Keyword Table
NCPKEY (ZER210,CKT,CIRCUITS)
NCPKEY (ZER210,LIN,LINES)
NCPKEY (ZER210,MDL,MODULES)
NCPKEY (ZER210,NOD,NODES)
$ETAB
ZER150: $KEYDSP (ZER151)
ZER151: $STAB ; MODULE module-name keyword table
NCPKEY (ZER152,XPR,X25-PROTOCOL)
NCPKEY (ZER160,XSV,X25-SERVER)
$ETAB
ZER152: $KEYDSP (ZER153,<$DEFAULT(COUNTERS)>)
ZER153: $STAB
PARKEY (ZER154,Z$PCTR,^D0000,COUNTERS)
$ETAB
ZER154: $KEYDSP (ZER155,<$ALTERNATE(NCPCFM)>)
ZER155: $STAB
PARKEY (ZER156,X$PDTE,^D1100,DTE)
PARKEY (ZER158,X$PKNW,^D1100,KNOWN)
$ETAB
ZER156: DTE$ADR (NCPCFM)
ZER158: $KEYDSP (ZER159,<$DEFAULT(DTES)>)
ZER159: $STAB
KNWKEY (NCPCFM,X$KDTE,^D0000,DTES)
$ETAB
ZER160: $KEY (NCPCFM,ZER161,<$DEFAULT(COUNTERS)>)
ZER161: $STAB
PARKEY (,Z$PCTR,^D0000,COUNTERS)
$ETAB
ZER170: NOD$ID (ZER210,,<COUNTERS>) ; NODE node-id
ZER210: $KEYDSP (ZER211,$DEFAULT(COUNTERS))
ZER211: $STAB ; ZERO entity parameter keyword table
NCPKEY (NCPCFM,CTR,COUNTERS)
$ETAB
SUBTTL Common NCP Command Termination
NCPCFM: $CRLF ; End Command with CR/LF
SUBTTL Symbol Table Clean Up
XPUNGE ; Keep symbol table clean of local symbols
COMMENT # May or may not be needed depending on how
BLISS libraries are set up. #
PURGE CM%DPP ; PURGE symbols from universals
PURGE CM%FNC
PURGE CM%HPP
PURGE CM%IDA
PURGE CM%ITM
PURGE CM%NSF
PURGE CM%PO
PURGE CM%SDH
PURGE CM%BRK
PURGE FTJSYS
PURGE FTUUOS
PURGE .CMCFM
PURGE .CMCMA
PURGE .CMDEV
PURGE .CMFIL
PURGE .CMFLD
PURGE .CMIFI
PURGE .CMINI
PURGE .CMKEY
PURGE .CMNOD
PURGE .CMNOI
PURGE .CMNUM
PURGE .CMNUX
PURGE .CMOFI
PURGE .CMQST
PURGE .CMTAD
PURGE .CMTOK
PURGE .CMTXT
PURGE CM%INV
PURGE CM%FW
PURGE S1 ; Purge P$HELP related variables
PURGE S2
PURGE T1
PURGE T2
END ; End of NCPTAB.MAC
; Local Modes:
; Mode:MACRO
; Auto Save Mode:2
; Comment Column:30
; Comment Rounding:+1
; End: