Enter your search terms Submit search form
	Web pdp-10.trailing-edge.com

;	JOB TO BUILD FORDDT (THE FORTRAN DEBUGGER) FOR THE DECsystem-10
;	SUBMIT B10FDT.CTL/TIME:00:05:00/RESTART:1



;COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1976, 1985
;ALL RIGHTS RESERVED.
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY  OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF THE  SOFTWARE  IS  HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT  NOTICE
;AND  SHOULD  NOT  BE  CONSTRUED  AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY  OF  ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.

;	VERSION 10	B10FDT.CTL	April 1982


;This control file describes the procedures used to build the distributed
;software.   It  is  unlikely  that  this  control  file can be submitted
;without  modification  on  customer  systems.   Submit  times  may  vary
;depending  on  system  configuration  and  load.   The  availability  of
;sufficient disk space and core is mandatory.  This control file has  not
;been  extensively  tested on alternate configurations.  It has been used
;successfully  for  its  intended  purpose:   to  build  the  distributed
;software on our development systems.

;FUNCTION:	THIS CONTROL FILE BUILDS THE STANDARD FORTRAN DEBUGGER,
;		  FORDDT.  IT UTILIZES FIELD IMAGE SOFTWARE.

; INPUT:	THE FOLLOWING FILES ARE REQUIRED BY THIS JOB IN THE
;		  DISK AREAS INDICATED:

;	SYS:	DIRECT	.EXE
;	SYS:	MACRO	.EXE		USE MACRO 53A

;	DSK:	[AREA UNDER WHICH B10FDT.CTL IS BEING RUN]
;		B10FDT	.CTL		THIS CONTROL FILE
;		FORDDT	.MAC		INPUT FOR MACRO

; OUTPUT:	THE FOLLOWING FILES ARE GENERATED BY THIS CONTROL FILE
;		  AND WILL BE AVAILABLE ON THIS DISK AREA AT JOB
;		  TERMINATION:

;	DSK:	[AREA UNDER WHICH B10FDT.CTL IS BEING RUN]
;		B10FDT	.LOG		LOG FROM THIS JOB
;		FDDT	.MAC		DEFINES  ASSEMBLY SWITCH
;		FORDDT	.REL		FORTRAN DEBUGGER FOR THE -10

START::
.CHKPNT START

; Generate FORDDT for the 10

.DEASSIGN
.MOUNT PIT:
.R SETSRC
*C PIT:

.ASSIGN DEC: SYS:
.ASSIGN DEC: UNV:
.SET WATCH VERSION

; Show checksums and versions for system software

.DIRECT/CHECKSUM	-
*DIRECT	.EXE	SYS:	,-
*MACRO	.EXE	SYS:

; Show checksums of input files

.DIRECT/CHECKSUM	-
*B10FDT	.CTL	,-
*FORDDT	.MAC

; Select features

.COPY FDDT.MAC=TTY:
*	TOPS20==0	;TOPS-10
*^Z

; Build FORDDT

.RUN SYS:MACRO
*FORDDT=FDDT.MAC,FORDDT.MAC


; Show checksums of all output files

.DIRECT/CHECKSUM	-
*FDDT	.MAC	,-
*FORDDT	.REL


%FIN::

;	[END OF B10FDT.CTL]