Trailing-Edge
-
PDP-10 Archives
-
BB-BT99S-BB_1990
-
10,7/mon/tapuuo.mac
There are 13 other files named tapuuo.mac in the archive. Click here to see a list.
TITLE TAPUUO - MAGTAPE USER INTERFACE FOR TOPS10- V441
SUBTTL T.HESS/TAH/TW/GMU/DPM 28-FEB-89
SEARCH F,S,DEVPRM
$RELOC
$HIGH
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED
; OR COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
;
;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
; 1974,1975,1976,1977,1978,1979,1980,1982,1984,1986,1988.
;ALL RIGHTS RESERVED.
.CPYRT<1974,1988>
XP VTPUUO,441 ;DEFINE VERSION NUMBER FOR STORAGE MAP
SALL
TAPUUO::ENTRY TAPUUO
;DISPATCH TABLE
POPJ P, ;(-5) OFFLINE
JRST ECOD2## ;(-4) SPECIAL ERROR STATUS
JRST REGSIZ## ;(-3) USE DEFAULT
JRST TPMINI ;(-2) INITIATION
JRST TPMHNG ;(-1) HUNG DEVICE
TPMDSP::JRST TPMREL ;(0) RELEASE
JRST TPMCLS ;(1) CLOSE OUTPUT
JRST TPMOUT ;(2) OUTPUT
JRST TPMIN ;(3) INPUT
JRST TPMENT ;(4) ENTER
JRST TPMLKP ;(5) LOOKUP
JRST TPMDOU ;(6) DUMP OUTPUT
JRST TPMDIN ;(7) DUMP INPUT
POPJ P, ;(10) USETO
POPJ P, ;(11) USETI
POPJ P, ;(12) UGETF
JRST CPOPJ1## ;(13) RENAME
JRST TPCLSI ;(14) CLOSE INPUT
POPJ P, ;(15) UTPCLR
JRST MTAPE0 ;(16) MTAPE UUO
IFE FTTLAB,<
TPMENT==CPOPJ1## ;DUMMY ENTRIES
TPMLKP==CPOPJ1##
TPCLSI==CPOPJ##
> ;END IFE FTTLAB
;RANDOM DDB BYTE POINTERS
TDYMOD: POINT 3,TDVSTS(F),10
TDYMD1: POINT 3,TDVSTS(F),31 ;FOR SET FORMAT
TDYDEN: POINT 4,TDVSTS(F),7
TDYDN1: POINT 4,TDVSTS(F),35 ;FOR SET DENSITY
TDYBYT: POINT 8,TDVSTS(F),10 ;PARITY/DENSITY/MODE
TDMDBY==170 ;MASK OF DENSITY IN PAR/DEN/MODE
PDENS: POINT 2,DEVIOS(F),28 ;DENSITY (SETSTS)
PBUFRM: POINT 14,DEVOAD(F),13 ;MAXIMUM FRAME COUNT
;RANDOM DDB STATUS
D.RDBK==(1B0) ;READ BACKWARDS
D.NRLT==(1B1) ;NEXT RECORD AT LOW THRESHOLD
;(1B2) UNUSED
D.EPAR==(1B3) ;USE EVEN PARITY (7TK ONLY)
;BITS IN S (DEVIOS)
IOERRS==IODERR!IODTER!IOBKTL!IOIMPM ;ALL I/O ERRORS
OFFLIN==(1B1) ;UNIT IS OFF LINE
OFLUNH==(1B2) ;OFF-LINE UNIT NOT READY
IFN FTTLAB,<
FINP==(1B3) ;FIRST INPUT OPERATION
LBLNED==(1B4) ;LABELING ACTION NEEDED
LBLWAT==(1B5) ;WAITING FOR LABEL PROCESS
LBLSTP==(1B6) ;STOP I/O BECAUSE OF ERROR
FOUT==(1B7) ;FIRST OUTPUT OPERATION
FSTOP==FINP!FOUT ;FIRST I/O OPERATION
LBLEOF==(1B8) ;EOF SEEN
> ;END IFN FTTLAB
;BITS IN DEVIAD
OFLHNG==(1B0) ;HUNG DEVICE (MUST BE SIGN BIT)
MTSNAR==:(1B9) ;SET-RETRY BIT (UUOCON,COMCON USE)
IOSRTY==:(1B10) ;IF ON, NO ERROR RETRY (TXIKON)
IOSCP2==:(1B11) ;STARTING IO FROM 2ND CPU
;MISCELLANEOUS STUFF
ST.FAC==1B0 ;UPADTE DENSITY IN OTHER DDB
.ORG DEVLEN
TDVUDB::!BLOCK 1 ;LH = UDB PNTR
TDVSTS:!BLOCK 1 ;UNIT STATUS INFO
TDVIOR::!BLOCK 1 ;IORB TO WAIT FOR
TDVSUL:!BLOCK 1 ;SAVED USER UPPER LIMIT
TDVSLL:!BLOCK 1 ;SAVED USER LOWER LIMIT
TDVSVM:!BLOCK 1 ;SAVED M FOR DUMP MODE
TDVREM:!BLOCK 1 ;REMAINDER FOR MODE 16
TDVLEN::! ;LENGTH OF TAPE DDB
.ORG
$LOW
TDVDDB::DDBBEG (TDV,TDVLEN)
SETWRD (DEVCHR,<MTSIZ##+1>) ;DEVCHR
SETWRD (DEVSER,<MCSEC0+TPMDSP>) ;DEVSER
SETWRD (DEVMOD,<DVLNG!1023,,154403+<1_BYTMOD>>) ;DEVMOD
SETWRD (DEVTYP,<<.TYMTA*.TYEST>!DEPLEN,,DEPEVM>);DEVTYP
SETWRD (DEVCPU,<600000,,TAPCHN##>) ;DEVCPU
DDBEND
$HIGH
;POINTERS TO LABEL STATUS WORD IN UDB
IFN FTTLAB,<
TUYLTP::POINT 4,TUBLBL(U),35 ;LABEL TYPE
TUYRQT: POINT 4,TUBLBL(U),27 ;REQUEST TYPE CODE
TUYINF: POINT 6,TUBLBL(U),23 ;ADDITIONAL INFO
TUYJBN: POINT 9,TUBLBL(U),17 ;JOB NUMBER
; BITS AND PIECES IN THE TAPE LABEL INFORMATION BLOCK
TUYFCT: POINT 18,TUBRFM(U),17 ;FORMS CONTROL BYTE
.TFCNO==1 ;NO FORMS CONTROL
.TFCAS==2 ;1ST CHAR IS FORMS CONTROL
.TFCAM==3 ;RECORD CONTAINS ALL FORMS CONTROL
TUYRFM: POINT 18,TUBRFM(U),35 ;RECORD FORMAT BYTE
.TRFDF==0 ;DEFAULT
.TRFFX==1 ;FIXED
.TRFVR==2 ;VARIABLE
.TRFSP==3 ;SPANNED
.TRFUN==4 ;UNDEFINED
TUYRSZ: POINT 36,TUBRCC(U),35 ;RECORD SIZE
TUYBSZ: POINT 36,TUBBKL(U),35 ;BLOCK SIZE
TUYECR: POINT 18,TUBEXP(U),17 ;CREATION DATE (15-BIT FORMAT)
TUYEEX: POINT 18,TUBEXP(U),35 ;EXPIRATION DATE (15-BIT FORMAT)
TUYPRT: POINT 36,TUBPRT(U),35 ;PROTECTION CODE
TUYPSN: POINT 36,TUBPSN(U),35 ;FILE SEQUENCE NUMBER
TUYFNM: POINT 7,TUBFNM(U) ;START OF 17 CHARACTER FILE.EXT
TUYGEN: POINT 18,TUBGVR(U),17 ;GENERATION NUMBER
TUYVER: POINT 18,TUBGVR(U),35 ;VERSION NUMBER
; TABLE OF CHARACTERS PER WORD INDEXED BY TAPE MODE
CPWTBL: EXP 5 ;EITHER EQUIV TO 1 OR ILLEGAL
EXP 5 ;DEC CORE DUMP
EXP 4 ;INDUSTRY COMPATIBLE
EXP 6 ;TU70 SIXBIT
EXP 5 ;ANSI ASCII
EXP 6 ;7-TRK CORE DUMP
> ;END IFN FTTLAB
PMTCRC::POINT 9,TUBCHR(U),26 ;LAST 9TK CRC (NRZI)
PMTNCR::POINT 3,TUBCHR(U),29 ;BYTE RESIDUE OF LAST WORD
PMTRTY: POINT 1,DEVIOS(F),9 ;RETRY BIT
SUBTTL INPUT UUO
TPMIN:: PUSHJ P,SAVE2## ;SAVE P1,P2
PUSHJ P,INSET ;SET UP ACS ETC.
IFN FTTLAB,<
TLZN S,LBLSTP ;LBL PCS WANT US TO STOP?
JRST TPMINA ;NO - PROCEED
TRNN S,IODEND ;EOF ONLY?
PJRST TPSTP0 ;NO - RETURN
MOVEI P1,0 ;YES - FIX THINGS FOR UUOCON
PJRST RDEOF ;...
> ;END IFN FTTLAB
TPMINA: PUSHJ P,SETRED ;SET READ OP
PUSHJ P,GENIOR ;GENERATE IORB
JRST TPMINF ;WHOOPS (UNABLE TO GET STORAGE)
IFN FTMP,<
PUSHJ P,TPMACC ;IF CONT ON OTHER CPU
PJRST PCLINP ; DO IT DIFFERENTLY
> ;END IFN FTMP
MOVEI T2,DEPAIO ;ASYNC I/O?
TDNE T2,DEVAIO(F)
JRST QUEINP ;YES - GO QUEUE INPUT REQUEST
MOVEM T1,TDVIOR(F) ;NO - REMEMBER THIS IORB
XMOVEI T2,TPMIN1 ;HACK LOCATION
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWAT
PUSHJ P,TAPRQT## ;PLACE AT END OF QUEUE
PUSHJ P,KONWAT ;WAIT FOR KONTROLLER
;RETURN HERE P1 := IORB
SKIPGE TRBFNC(P1) ;AOK??
JRST TPMFLS ;FLUSH REQUEST ARE RETURN TO USER
SKIPN DEVEVM(F) ;HAVE EVM?
PUSHJ P,RSTEVM## ;NO - GET IT IF NECESSARY
TPMIN1: PUSHJ P,TPMXCI ;RELOCATE DEVIAD & XCT .+1
EXCTUX <LDB T2,[POINT 17,0(T1),17]> ;SIZE OF BUFFER
IFN FTKS10,<
CAILE T2,^D7682 ;MAX # WORDS GUARANTEED NOT TO RUN OUT
JRST TPMFLS ;OF MAPPING REGS (1 WORD ON LAST WORD OF PAGE
; + 15 FULL PAGES) +1 (T2:=BUFFER SIZE +1)
> ;END IFN FTKS10
SOJLE T2,TPMFLS ;LOSE IF TOO SMALL (0 OR 1)
MOVNS T2 ;NEGATE SIZE
HRLZS T2 ;TO LH
HRRI T2,1(T1) ;MAKE GENUINE IOWD
MOVE T1,P1 ;IORB PNTR IN T1
SETZ T4, ;DO WHOLE BUFFER
PUSHJ P,MAKLST ;GET IOWD LIST
JRST TPMFLS ;FLUSH IF NO SPACE
TRO S,IOACT ;SET I/O ACTIVE
PUSHJ P,STORS7## ;STORE S
XMOVEI T1,INPDUN ;WHERE TO GO WHEN DONE
MOVEM T1,IRBIVA(P1) ;STORE IT
TPSWST:
IFN FTKS10,<
TLNN S,IO ;DON'T SWEEP IF OUTPUT ON KS10
>
PUSHJ P,TPMSWP ;SWEEP CACHE IF NOT TM10A
TPSTRT: MOVE T1,P1 ;IORB TO T1 FOR TAPSER
PJRST TAPSIO## ;TELL TAPSER TO TAKE IT AWAY
;ROUTINE TO FLUSH REQUEST AND RETURN IORB / SET IMPROPER MODE
TPMFLS: PUSHJ P,TAPFLS## ;FLUSH UNIT
PUSHJ P,TPMRI1 ;T1 := IORB
PUSHJ P,SETIOD## ;REVIVE USER
PUSHJ P,CLRACT## ;CLEAR I/O ACTIVE
PUSHJ P,TAPCTM## ;CLEAR HUNG TIMER
;ROUTINE TO SET IMPROPER MODE AND RETURN
TPMINF: PUSHJ P,RTEVM## ;RETURN RESOURCES
TRO S,IOIMPM ;LITE A BIT
PJRST STOIOS## ;STORE S AND RETURN
;HERE WHEN INPUT DONE
;U,W,F SETUP AND P1=IORB
INPDUN: PUSHJ P,SETIOS ;SET UP S AND CHECK ERRORS
JSP P2,INPERR ;PONDER PROBLEM
MOVE T1,P1 ;COPY IORB PNTR TO T1
LDB T2,PRBFCN## ;GET FCN
CAIN T2,RB.FRB ;READ BACKWARDS?
TRNN S,IOBOT ;YES - AT BOT?
TRNE S,IODEND ;SEEN EOF?
JRST RDEOF ;YES - TELL HIM
LDB P2,PRBMOD## ;GET MODE
MOVE P2,TMODTB##(P2) ;NO. OF BYTES PER WORD
LDB T2,PIOMOD##
CAIN T2,BYTMOD ;BUT IF IN BYTE MODE
SETZ P2, ; NO CONVERSION OF BYTE COUNT
IFN FTMP,<
PUSHJ P,STONBF## ;UPDATE LH(DEVNBF) IF POSSIBLE
AOS DEVNBF(F) ;COUNT 1 MORE RECORD READ
> ;END IFN FTMP
PUSHJ P,SVEUF## ;MAKE JOB ADDRESSABLE
PUSHJ P,SPCS## ;ALSO SETUP PCS
IFN FTKL10,<
MOVE T1,TKBCNT(W) ;NUMBER OF RECORDS WE DID
SOJLE T1,INPDN2 ;IF MORE THAN 1,
IFN FTMP,<ADDM T1,DEVNBF(F)> ;UPDATE NO OF RECS READ IN DDB
INPDN1: SOSG TKBCNT(W) ; (WOULD HAVE STOPPED EARLY ON LENGTH ERROR
JRST INPDN2 ; IF THE WRDCNT WAS WRONG)
MOVE T1,DEVIAD(F)
EXCTUX <MOVE T2,1(T1)> ;GET BYTE COUNT
ADDM T2,TUBCRD(U) ;UPDATE TOTAL CHARS READ
LDB T4,PRBMD2## ;GET MODE
PUSHJ P,CHR2WD ;CONVERT TO WORDCOUNT
EXCTUU <MOVEM T2,1(T1)> ;STORE WRDCNT IN BUFFER
PUSHJ P,ADVBFI## ;MOVE TO NEXT BUFFER
TLOA P1,400000 ;FLAG NOT TO CALL ADVBFX AGAIN
JRST INPDN1 ;AND KEEP ON GOING
INPDN2:
> ;END IFN FTKL10
LDB T4,PRBMD2## ;GET MODE
IFN FTKL10,<
MOVSI T2,RB.SEN ;AN ERROR IN NEXT RECORD (CHAN CHAINING)?
TDNE T2,TRBSTS(P1) ; (BUT THIS RECORD IS OK)
JRST [ANDCAM T2,TRBSTS(P1) ;YES - HENCE RECORD LENGTH IS RIGHT
PUSHJ P,TPMXCI ;SO GET BYTE COUNT OUT OF BUFFER
EXCTUX <MOVE T2,1(T1)> ; WHERE DX10 STORED IT
MOVEM T2,TRBRCT(P1)
JRST INPDN3]
> ;END IFN FTKL10
MOVE T2,TRBRCT(P1) ;GET CHARS READ
INPDN3: MOVEM T2,TUBCCR(U) ;SAVE COUNT FOR TAPOP
PUSHJ P,TPMXCI ;SET UP FOR PXCT
EXCTUX <LDB T3,[POINT 17,0(T1),17]> ;GET BUFFER SIZE+1 IN WORDS
SOS T3 ;BUFFER SIZE
IMUL T3,TMODTB##(T4) ;GET BUFFER SIZE IN FRAMES
CAILE T2,(T3) ;RECORD .LTE. BUFFER
MOVEI T2,(T3) ;NO, USE BUFFER SIZE
PUSHJ P,CHR2WD ;CONVERT FC TO WC OR BC
PUSHJ P,TPMXCI ;GET C(DEVIAD) AGAIN
EXCTUU <MOVEM T2,1(T1)> ;STORE IN HEADER
PUSHJ P,TPMRCW ;RETURN XFER LIST
TLZN P1,400000 ;HAVE AN ADDRESS CHECK EARLIER (DX10)?
PUSHJ P,ADVBFF## ;ADVANCE BUFFERS
JRST TPSWSP ;NO MORE STOP IO
IFN FTMP,<
HRRZ T1,DEVIAD(F) ;NEXT BUFFER OK WRT CACHE
PUSHJ P,BUFSSN##
JRST TPSWSP ;NO, STOP I/O
> ;END IFN FTMP
PUSHJ P,SETIOD## ;REVIVE USER
MOVEM S,DEVIOS(F) ;SAVE CORRECT IOS
MOVE T1,P1 ;SET UP IORB PNTR
LDB P2,PRBFCN## ;GET FCN BACK
PUSHJ P,TPIOGO ;SET IORB
JRST TPSWSP ;NO MORE - STOP I/O
JRST TPMIN1 ;START NEXT READ
;SUBROUTINE TO CONVERT BYTE-COUNT TO WORD-COUNT
;ENTER T2=BYTE COUNT, P2=NO OF BYTES PER WORD, P2=0 IF BYTE MODE
;EXIT T2=WORDCOUNT
CHR2WD: JUMPE P2,FCTOBC
IDIVI T2,(P2)
JUMPE T3,CPOPJ##
AOJA T2,CPOPJ##
;SUBROUTINE TO CONVERT FRAME COUNT TO BYTE COUNT
;ENTER T4=PRBMOD, T2=FRAME COUNT
;EXIT T2=BYTE COUNT
FCTOBC: PUSHJ P,SAVE3##
HRRZ P1,DEVBUF(F) ;BUFFER HEADER BLOCK ADDR
EXCTUX <LDB P3,[POINT 6,1(P1),11]> ;BYTE SIZE
CAMN P3,TMODFS##(T4) ;BYTE SIZE = FRAME SIZE ?
POPJ P, ;YES, BYTE COUNT = FRAME COUNT
IDIV T2,TMODTB##(T4) ;NO, CALCULATE BYTE COUNT
MOVEI P1,44 ;WORD LENGTH
IDIVI P1,(P3) ;36/ BYTE SIZE
IMULI T2,(P1) ;# WORDS * BYTES PER WORD
SKIPN P1,T3 ;EXTRA FRAMES ?
POPJ P, ;NO
IMUL P1,TMODFS##(T4) ;YES, EXTRA FRAMES * FRAME SIZE
ADDI P1,-1(P3) ;ROUND UP
IDIVI P1,(P3) ;/ BYTE SIZE
ADD T2,P1 ;ADD EXTRA BYTES
POPJ P,
TPIOGO: TRNN S,IOTEND!IOERRS ;ANY ERRORS / EOT
PUSHJ P,QDECR ;DECREMENT QUANT
POPJ P, ;NO MORE - RETURN
MOVE T1,P1 ;GET IORB PNTR
MOVEI T2,RB.ACT ;MARK REQUEST ACTIVE
PUSHJ P,STOIOR ;STORE INFO IN IORB
JFCL ;NO WAY
PJRST CPOPJ1## ;GIVE SKIP RETURN
;ROUTINE TO HANDLE EOF/BOT AND STOP TAPE
RDEOF: TRZ S,IODEND ;CLEAR EOF
TLO S,IOEND ;SAY PAYS END SEEN
PUSHJ P,TPMXCI ;GET C(DEVIAD)
EXCTXU <MOVEM S,-1(T1)> ;STORE IOS IN BUFFER HEADER
IFN FTTLAB,<JUMPE P1,TPSTP0> ;JUMP IF NO IOLIST
PUSHJ P,TPMRCW ;RETURN CCW LIST
TPMSTP: PUSHJ P,TPMRIO ;RETURN IORB
TPSTP0: PUSHJ P,RTEVM## ;RETURN EVM IF ANY
TRZ S,IOACT ;FIGHT DUAL-CPU RACE
PUSHJ P,SETIOD## ;REVIVE HIM
PUSHJ P,CLRACT## ;CLEAR I/O ACTIVE
PUSHJ P,TAPCTM## ;CLEAR HUNG TIMER
HLLZS TKBSTS(W) ;SET CNTR TO ZERO
PJRST STOIOS## ;STASH IOS & EXIT
TPSWSP: PUSHJ P,TPMSWP ;SWEEP CACHE IF NOT TM10A
JRST TPMSTP ;NOW STOP IO
;ROUTINE TO RETURN IOWD LIST , P1 := IORB
TPMRCW:
IFN FTKL10,<
HRRE T1,@IRBACC(P1) ;FETCH CHANNEL COMMAND LIST
CAIG T1,100 ;ALLOW FOR COUNT
POPJ P, ;RETURN
PJRST RTNIOW## ;ELSE RETURN WHOLE LIST
> ;END IFN FTKL10
IFN FTKS10,<POPJ P,> ;RETURN
;ROUTINE TO RETURN IORB AND DE-Q IT
TPMRIO: PUSHJ P,TAPREM## ;HAVE TAPSER PRUNE QUEUE
; RETURN PNTR TO IORB IN T1
TPMRI1: MOVE T2,T1 ;GIVWDS LIKES IT IN T2
MOVEI T1,TRBLEN ;# OF WORDS
PJRST GIVWDS## ;RETURN CORE
;ROUTINE TO DECREMENT KONTROLLER QUANTA - SKIP RETURN IF NON-ZERO
QDECR: HRRZ T1,TKBSTS(W) ;GET QUANTA
SOSL T1 ;DECR SKIP IF NEG
HRRM T1,TKBSTS(W) ;STORE RESULT
JUMPG T1,CPOPJ1## ;SKIP RET IF STILL POSITIVE
POPJ P, ;QUANTUM GONE TO 0, GIVE UP
SUBTTL OUTPUT UUO
TPMOUT: PUSHJ P,SAVE2## ;SAVE P1,P2
PUSHJ P,OUTSET ;SET UP FOR OUTPUT
SKIPGE TUBREC(U) ;IS RECORD COUNT NEGATIVE?
SETZM TUBREC(U) ;YES, INITIALIZE TO ZERO
IFN FTTLAB,<
TLZE S,LBLSTP ;WANT TO STOP NOW?
JRST TPSTP0 ;STOP ON LABEL ERROR
> ;END IFN FTTLAB
MOVEI P2,RB.FWT ;FUNCTION WRITE
PUSHJ P,GENIOR ;MAKE AN IORB
JRST TPMINF ;UNABLE TO GET STORAGE
IFN FTMP,<
PUSHJ P,TPMACC ;IF ON OTHER CPU
JRST PCLOUT ; DO IT DIFFERENTLY
> ;END IFN FTMP
MOVEI T2,DEPAIO ;ASYNC I/O?
TDNE T2,DEVAIO(F)
JRST QUEOUT ;YES - GO QUEUE OUTPUT REQUEST
MOVEM T1,TDVIOR(F) ;NO - WAIT FOR THIS ONE
XMOVEI T2,TPMOU1 ;HACK LOCATION
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWAT
PUSHJ P,TAPRQT## ;QUEUE IT UP
PUSHJ P,KONWAT ;WAIT FOR CONTROLLER
;RETURN WITH P1 := IORB
SKIPGE TRBFNC(P1) ;THINGS IN SHAPE
JRST TPMFLS ;NO - U LOSE
SKIPN DEVEVM(F) ;HAVE EVM
PUSHJ P,RSTEVM## ;NO - GET IT IF NECESSARY
;FALL INTO TPMOU1
TPMOU1: PUSHJ P,TPMXCO ;GET C(DEVOAD)
EXCTUX <HRRZ T2,1(T1)> ;GET WORD COUNT FROM BUFFER
JUMPE T2,ADVOUT ;HANDLE EMPTY BUFFER SPECIAL
LDB T3,PIOMOD## ;MODE OF DDB
CAIE T3,BYTMOD ;BYTE MODE?
JRST [SETZM T4 ;NO
JRST TPMOU2]
LDB T3,PRBMD2## ;YES, CONVERT TO WORDS
MOVE T4,T2 ;KEEP BYTE COUNT AROUND
IDIV T2,TMODTB##(T3)
SKIPE T3
ADDI T2,1 ;T2=NUMBER OF WORDS
TPMOU2: PUSHJ P,TPMXCO ;GET BUFFER SIZE
EXCTUX <LDB T3,[POINT 17,0(T1),17]>
IFN FTKS10,<
CAIG T2,^D7621 ;MAX # WORDS GUARANTEED NOT TO RUN OUT
;OF MAPPING REGS (1 WORD ON LAST WORD OF PAGE
; + IS FULL PAGES)
> ;END IFN FTKS10
CAILE T2,-1(T3) ;OK?
JRST SETIMP ;NO, LIGHT AN ERROR BIT
MOVNS T2 ;-N
HRLZS T2 ;PUT IN LH
HRRI T2,1(T1) ;BUFFER ADDRS
MOVE T1,P1 ;IORB PNTR TO T1
PUSHJ P,MAKLST ;MAKE CHL XFER LIST
JRST TPMFLS ;FLUSH REQUEST
TRO S,IOACT ;SET I/O ACTIVE
PUSHJ P,STORS7## ;STORE S
XMOVEI T1,OUTDUN ;WHERE TO GO WHEN FINISHED
MOVEM T1,IRBIVA(P1) ;STORE IN IORB
PJRST TPSWST ;START DEVICE
;HERE WHEN OUTPUT DONE, P1 := IORB
OUTDUN: PUSHJ P,SETIOS ;SET UP S W/ TAPE INFO
JSP P2,OUTERR ;TRY TO FIX WRITE ERROR
PUSHJ P,SETIOD## ;REVIVE USER
PUSHJ P,STORS7## ;SAVE S IN DDB
PUSHJ P,TPMRCW ;RETURN XFER LIST
IFN FTTLAB,<
TRNE S,IOTEND ;EOT SEEN YET?
JRST LBLEOT ;YES - INVOKE LBL PCS
> ;END IFN FTTLAB
IFN FTKL10,<
PUSHJ P,SVEUF## ;SET UP ADDRESSING (ADVBFO DOESN'T)
PUSHJ P,SPCS## ;AND PCS
OUTDN1: SOSG TKBCNT(W) ;FOR ALL BUT THE LAST BUFFER,
JRST OUTDN2
PUSHJ P,ADVBFO## ;TELL UUOCON THAT IT'S FULL
JRST TPMSTP ;OOPS, ADDRESS CHECK, ETC.
JRST OUTDN1 ;AND TRY THE NEXT
OUTDN2:
> ;END IFN FTKL10
PUSHJ P,ADVBFE## ;ADVANCE BUFFER
JRST TPMSTP ;NO MORE STOP IO
MOVEI P2,RB.FWT ;TRY TO WRITE ON
IFN FTMP,<
MOVSI T2,-1 ;IF NEXT BUFFER WAS NOT SWEPT
TDNE T2,DEVNBF(F) ; SHUT DOWN THE TAPE
> ;END IFN FTMP
PUSHJ P,TPIOGO ;...
JRST TPMSTP ;NO MORE RETURN
JRST TPMOU1 ;CONTINUE WRITING
;HERE TO ADVANCE BUFFER IF ONE FOUND EMPTY
SETIMP: TRO S,IOIMPM ;USER FIDDLED WITH BUFFER HEADER
ADVOUT:
IFN FTMP,<
PUSHJ P,CHKCPI## ;UUOCON HAS INCREMENTED DEVNBF
SKIPA T1,[-1] ; BUT WE WON'T GET TO MAKLST
MOVSI T1,-1 ; TO COUNT IT DOWN
ADDM T1,DEVNBF(F) ; SO MAKE DEVNBF RIGHT
> ;END IFN FTMP
PUSHJ P,ADVBFE## ;CYCLE
SKIPA ;NO NEXT BUFFER
JRST TPMOU1 ;TRY THIS ONE
PUSHJ P,SETIOD## ;REVIVE USER
PUSHJ P,CLRACT## ;CLEAR I/O ACTIVE
PUSHJ P,TAPCTM## ;CLEAR HUNG TIMER
TPMFLX: PUSHJ P,TAPFLS## ;ELSE FLUSH REQUEST
PUSHJ P,TPMRI1 ;RETURN IORB
PJRST RTEVM## ;AND EVM IF ANY
IFN FTTLAB,<
;ENTER HERE TO PROCESS EOT AND SEND MSG TO LBL PCS
LBLEOT: PUSHJ P,ADVBFE## ;ADVANCE BUFFERS
JFCL ;IGNORE
PUSHJ P,LBLCHK ;LABEL PROCESSING?
SKIPA ;YES - SEND MSG ETC.
PJRST TPMSTP ;ELSE PROCESS AS BEFORE
LDB T1,TUYLTP ;GET LABEL TYPE.
CAIN T1,LT.NLV ;SHOULD USER SEE EOT?
JRST TPMSTP ;YES, GIVE IT TO THEM
TLO S,LBLNED ;NO GIVE IT TO LBL PCS NEXT TIME.
TRZ S,IOTEND ;CLEAR EOT NOW
MOVEI T1,LR.EOT ;SET TYPE EOT
DPB T1,TUYRQT ; IN LBL MESSAGE
PJRST TPMSTP ; AND STOP IO
> ;END IFN FTTLAB
SUBTTL DUMP-MODE I/O
TPMDOU: PUSHJ P,SAVE2## ;SAVE P1,P2
PUSHJ P,OUTSET ;SET FOR OUTPUT
SKIPGE TUBREC(U) ;IS RECORD COUNT NEGATIVE?
SETZM TUBREC(U) ;YES, INITIALIZE TO ZERO
JRST TPMDMP ;TO COMMON ROUTINE
TPMDIN: PUSHJ P,SAVE2## ;SAVE P1,P2
PUSHJ P,INSET ;SET FOR INPUT
TPMDMP:
IFN FTTLAB,<
TLZE S,LBLSTP ;LBL ERROR?
POPJ P, ;YES, RETURN NOW
> ;END IFN FTTLAB
PUSHJ P,DMPSET ;SET UP IORB & WAIT FOR CTL
PJRST TPMINF ;LOSAGE
PUSHJ P,COMCHK## ;GET 1ST IOWD & BOUNDARIES
JUMPN S,ADRXIT ;ADDRESS CHECK?
MOVE S,DEVIOS(F) ;RESTORE S
JUMPE T1,TPMFLS ;OR NULL LIST - EXIT
PUSHJ P,SAVT## ;SAVE T1 (IOWD)
MOVEM T2,TDVSUL(F) ;SAVE USER UPPER LIMIT
MOVEM T3,TDVSLL(F) ; AND USER LOWER LIMIT
TPDNXT: MOVEM M,TDVSVM(F) ; AND M (UUO)
MOVEM T1,-1(P) ;SAVE T1 IN CASE OFL
IFN FTKS10,<
TRNN S,1B35 ;MODE 16?
TLNN S,IO ;YES, OUTPUT?
SKIPA ;NO, CHECK FOR BIG IOWD
JRST TPDNX1 ;YES, DON'T CHECK (ADIIOW WILL FIX)
HLRZ T2,T1 ;MAX # WORDS GUARANTEED NOT TO RUN OUT
CAIGE T2,^D-7681 ;OF MAPPING REGISTERS
JRST TPMFLS ;(1 WORD ON LAST WORD OF PAGE + 15 FULL PAGES)
TPDNX1:
> ;END IFN FTKS10
PUSHJ P,ADJIOW ;ADJUST IOWDS IF NECESSARY
;RETURNS IOWD IN T2
PUSHJ P,TPMDGO ;START I/O
JRST TPMFLS ;CAN'T - MAKLST LOST
MOVE M,TDVSVM(F) ;RESTORE M
PUSHJ P,WAIT1## ;WAIT FOR I/O TO CEASE
TLNN S,IO ;WRITING?
PUSHJ P,TPMSWP ;NO, MUST SWEEP CACHE
IFN FTTLAB,<
PUSHJ P,LBLCKS ;CHECK FOR LABEL EXPECTED
JFCL ;IGNORE THIS RETURN
TLNE S,LBLNED ;NEED LABELS?
PUSHJ P,LBLMSG ;YES, SEND THE MESSAGE
TLZ S,LBLSTP ;GET RID OF THIS BIT
MOVEM S,DEVIOS(F) ;SAVE NEW STATUS
> ;END IFN FTTLAB
TLNE S,IOSTBL ;ARE WE IN TROUBLE?
JRST TPDOFL ;YES - CHECK OFFLINE
TRNE S,IODEND!IOBOT!IOERRS ;ERRORS?
POPJ P, ;YES - EXIT
PUSHJ P,DMPSET ;GEN IORB FOR NEXT IOWD
PJRST TPMINF ; NO ROOM - LOSE
MOVE M,TDVSVM(F) ;RESTORE SAVED STUFF
MOVE T2,TDVSUL(F)
MOVE T3,TDVSLL(F) ;...
PUSHJ P,NXCMR## ;GET NEXT IOWD
JUMPN S,ADRXIT ;JUMP IF ADR CHK
MOVE S,DEVIOS(F) ;S CLOBBERED BY NXCMR!
JUMPE T1,TPMFLX ;ALL DONE IF ZERO
JRST TPDNXT ;SAVE M AND TRY NEXT
;ROUTINE TO HANDLE OFF-LINE UNIT IN DUMP MODE
TPDOFL: TLZ S,OFFLIN!IOSTBL ;CLEAR BITS
PUSHJ P,CKTC10 ;CHECK TC10 CROCK
PUSHJ P,HNGSTP## ;CALL ATTEN TO OURSELVES
PUSHJ P,DMPSET ;GEN IORB ETC.
PJRST TPMINF ;NO ROOM
MOVE T1,-1(P) ;RESTORE IOWD
JRST TPDNXT ;TRY AGAIN
;ROUTINE TO START DUMP MODE I/O
TPMDGO: MOVE T1,P1 ;IORB TO T1
SETZ T4, ;NOT BYTE-MODE, DO ALL OF IOWD
PUSHJ P,MAKLST ;GEN IO XFER LIST
POPJ P, ;WHOOPS
CONSO PI,II.IPA ;DON'T SET IF AT INT LVL
PUSHJ P,SETACT## ;SET I/O ACTIVE
HLLOS TKBSTS(W) ;GRNTEE CONTROLLER
XMOVEI T1,DMPDUN ;WHERE TO GO WHEN DONE
MOVEM T1,IRBIVA(P1) ;SAVE IN IORB
AOS 0(P) ;GIVE SKIP RETURN
PJRST TPSWST ;GO START DEVICE
;COME HERE ON DONE INTERUPT FOR DUMP MODE I/O
DMPDUN: PUSHJ P,SETIOS ;SET UP S
JSP P2,DMPERR ;ERROR RETURN
PUSHJ P,TPMRCW ;RETURN XFER LIST
MOVE T2,TRBRCT(P1) ;BYTE COUNT OF LAST REC
MOVEM T2,TUBCCR(U) ;SAVE FOR TAPOP
TRNN S,IODEND!IOBOT!IOERRS ;ERRORS?
SKIPN T1,TDVREM(F) ;ANY PARTIAL LEFT?
JRST TPMSTP ;STOP NOW
PUSHJ P,ADJIOW ;MUNG IOWD IF NECESSARY
TLNN S,IO ;INPUT?
SKIPE TDVREM(F) ;YES - DONE?
SKIPA T1,P1 ;NO - PROCEED
JRST TPMSTP ;YES - SHUT DOWN
PUSH P,T2 ;SAVE IT
LDB P2,PRBFCN## ;GET FCN BACK
MOVEI T2,RB.ACT ;MAKE IORB ACTIVE AGAIN
PUSHJ P,STOIOR ;STORE INFO IN IORB
JFCL ;UNLIKELY
POP P,T2 ;RESTORE IOWD
PUSHJ P,TPMDGO ;START IT UP
JRST TPMFLS ;FLUSH - MAKLST LOST
POPJ P, ;EXIT INTERUPT
;ROUTINE TO PERFORM IOWD HACKING FOR MODE 16
;DESIRED IOWD IN T1, RETURN ADJUSTED IOWD IN T2
ADJIOW: MOVE T2,T1 ;MOVE TO T2 IN CASE
SETZM TDVREM(F) ;CLEAR REMAINDER
TRNE S,1B35 ;WE HAVE NOTHING TO DO?
POPJ P, ;MODE 17 - RETURN
TLNE S,IO ;OUTPUT/INPUT?
JRST [LDB T4,PBUFSZ## ;OUTPUT - GET BUFFER SIZE
MOVNI T4,-1(T4) ;- BLOCK SIZE
JRST ADJIO1] ;JOIN COMMON CODE
LDB T4,[POINT RB.MDS,TRBFNC(P1),RB.MDP] ;INPUT - GET MODE
MOVE T3,TRBRCT(P1) ;CHAR COUNT OF LAST RECORD OR ZERO
IDIV T3,TMODTB##(T4) ;CONVERT TO WORDS
SKIPE T4 ;CHECK REMAINDER
ADDI T3,1 ;ADJUST IF NECESSARY
MOVNI T4,(T3) ;NEGATE
ADJIO1: HLRE T1,T2 ;SIZE OF XFER
CAML T1,T4 ;DOES IT FIT?
POPJ P, ;YES - JUST RETURN
SUB T1,T4 ;NEW WORD COUNT
SUB T2,T4 ;NEW ADDRESS
HRL T2,T1 ;WORRY ABOUT CARRY
MOVEM T2,TDVREM(F) ;SAVE FOR LATER
TLNN S,IO ;OUTPUT?
POPJ P, ;NO - THEN DONE
ADD T2,T4 ;RE-ADJUST IOWD FOR NOW
HRL T2,T4 ;-BS,,ADDRS OPTIMAL
POPJ P, ;RETURN
;HERE ON ADDRESS CHECK AT UUO LEVEL
ADRXIT: PUSHJ P,TPMFLS ;FLUSH REQUEST
PJRST ADRERR## ;AND STOP USER
;SET UP IORB FOR DUMP I/O
;RETURN P1 := IORB , CONTROLLER SCHEDULED
DMPSET: MOVEI P2,RB.FWT ;ASSUME WRITE
TLNN S,IO ;IS IT?
PUSHJ P,SETRED ;NO - GET READ FCN
TRNN S,1B35 ;MODE 16?
CAIE P2,RB.FRB ;YES - READ BACKWARDS?
PUSHJ P,GENIOR ;GENERATE IORB
POPJ P, ;NO ROOM - LOSE
MOVEM T1,TDVIOR(F) ;REMEMBER THIS ONE
XMOVEI T2,TPMNOP ;HACK LOCATION
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWAT
PUSHJ P,CPURQT## ;QUEUE IT UP
PUSHJ P,KONWAT ;WAIT TILL NOTICED
;RETURN WITH P1 := IORB
SKIPN DEVEVM(F) ;KI ONLY
PUSHJ P,DMPEV## ;RESTORE EVM IF NECESSARY
JRST CPOPJ1## ;SKIP RETURN
SUBTTL RELEASE AND CLOSE UUO'S
TPMREL: PUSHJ P,WAIT1## ;WAIT FOR I/O TO CEASE
MOVEI T1,0 ;RESET TO ZERO MODE
DPB T1,TDYMOD ;INTO THE DDB
MOVSI T1,D.RDBK!D.NRLT!D.EPAR
ANDCAM T1,TDVSTS(F) ;CLEAR THIS STUFF TOO
MOVE U,TDVUDB(F) ;UDB POINTER
IFN FTTLAB,<
TLNE S,LBLWAT ;WAITING FOR LABELS
PJRST LBLABO ;YES,JUST TELL LBL PCS
> ;END IFN FTTLAB
PUSHJ P,TPMRLW ;WAIT TILL DESELECTED
TPMRL2: PUSHJ P,TAPKIL## ;KLANK CTL
IFN FTMP,<
SETZM DEVNBF(F) ;NO SWEPT-FOR BUFFERS
SETZM DEVSBF(F)
> ;END IFN FTMP
PJRST TPMDQ ;UNWIND Q , PNTR IN T1
TPMRLW: MOVSI T1,TUSREW##!TKSSEL##
IFN FTMP,<CONSO PI,PI.IP7> ;CAN'T SLEEP ON CLOCK LEVEL (TAPTIC)
TDNN T1,TUBSTS(U) ;TAPE SHOULD NOT BE SELECTED
POPJ P, ;OK TO PROCEED
PUSHJ P,TSLEE1 ;SLEEP 1 SEC (REWINDS LIKE TO
; STRETCH THEIR LEGS SLOWLY!)
JRST TPMRLW ;SEE IF SUCCESSFUL
;CLOSE (WRITE TM,TM,BSB)
TPMCLS: TLNN F,OUTPB ;ANY OUTPUTS
POPJ P, ;NO -RETURN
LDB T1,PIOMOD## ;GET MODE
CAIGE T1,SD ;DUMP MODE?
PUSHJ P,OUT## ;NO - DUMP PARTIAL BUFFER
PUSHJ P,WAIT1## ;WAIT FOR I/O TO STOP
IFN FTMP,<
SETZM DEVNBF(F) ;NO BUFFERS SWEPT FOR
SETZM DEVSBF(F)
> ;END IFN FTMP
MOVE U,TDVUDB(F) ;UDB ADDRESS
IFN FTTLAB,<
LDB J,PJOBN## ;RESTORE J
PUSHJ P,LBLCHK ;NEED LABELING?
JRST TPCLSO ;YES - SEND CLOSE MSG
> ;END IFN FTTLAB
MOVSI T1,TKSOFL##!TUSREW##
TDNN T1,TUBSTS(U)
TRNE S,IOBOT ;TAPE AT BOT (REW OR UNLOAD) ?
POPJ P, ;YES, DON'T WRITE EOF'S
PUSHJ P,SAVE3## ;SAVE P1,P2,P3
MOVE P3,S
ANDI P3,IOERRS
PUSHJ P,IOSET ;SET UP U
TPMCL1: MOVEI P2,RB.FTM ;WRITE TAPE MARK
PUSHJ P,GENIOR ;GENERATE IORB
JRST TPMINF ;WHOOPS
MOVEM T1,TDVIOR(F) ;IORB TO REMEMBER
XMOVEI T2,TPMCL1 ;HACK LOCATION
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWAT
PUSHJ P,CPURQT## ;Q IT UP
PUSHJ P,GENIOR ;ANOTHER REQUEST
JRST TPMINF
XMOVEI T2,TPMCL1 ;HACK LOCATION
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWAT
PUSHJ P,CPURQT## ;ADD TO QUEUE
MOVEI P2,RB.FBR ;BACK OVER LAST TM
PUSHJ P,GENIOR ;MAKE ANOTHER IORB
JRST TPMINF ;LOSER
XMOVEI T2,TPMCL1 ;HACK LOCATION
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWAT
PUSHJ P,CPURQT## ;Q IT
PUSHJ P,KONWAT ;NOW WAIT YOUR TURN
;P1 := FIRST IORB
PUSHJ P,SETACT## ;SET I/O ACTIVE
XMOVEI T1,CLSDUN ;WHERE TO GO ON ENDING INT
MOVEM T1,IRBIVA(P1) ;STORE IN IORB
MOVEI T1,1 ;SET FOR ONE OP
HRRM T1,@IRBACC(P1) ;INTO IORB
PUSHJ P,TPSTRT ;GO START IT
PUSHJ P,WSYNC## ;WAIT FOR IT TO STOP
IOR S,P3
TRZ S,IODEND ;CLEAR EOF ON WRITE
PJRST STOIOS## ;STORE S AND RETURN
;ROUTINE TO PERFORM CLOSE INTERUPT ACTION
CLSDUN: PUSHJ P,SETIOS ;SET UP S FOR ERROR CHECK
JSP P2,OUTERR ;GO HANDLE ERROR
TRNE S,IOIMPM ;WRITE LOCKED?
JRST CLSWLK ;YES - FLUSH REMAINDER
PUSHJ P,TPMRIO ;REMOVE ITEM
HRRZ T1,TUBQUE(U) ;GET NEXT ITEM
MOVEI T2,RB.ACT ;MARK ACTIVE
DPB T2,PRBRQS##
MOVEI P2,CLSDUN ;ASSUME HERE AGAIN
LDB T2,PRBFCN## ;GET FCN
CAIN T2,RB.FBR ;BACKSPACE RECORD?
XMOVEI P2,CLSDN1 ;YES - GO HERE INSTEAD
MOVEM P2,IRBIVA(T1) ;SAVE NEXT INT ADDRS
HLLOS TKBSTS(W) ;GRNTEE STILL KEEP KONTROLLER
MOVEI T2,1 ;ONLY ONE OP PSE
HRRM T2,@IRBACC(T1) ;...
PJRST TAPSIO## ;START DEVICE
;HERE AFTER BACKSPACE RECORD
CLSDN1: PUSHJ P,SETIOS ;SET UP S
JSP P2,SPERR ;HANDLE SPACING ERROR
PJRST TPMSTP ;AND WIND DOWN
;HERE IF WRITE LOCKED ON CLOSE
CLSWLK: PUSHJ P,TAPDSL##
PUSHJ P,TPMRL2 ;FLUSH Q AND STOP I/O
PJRST TPSTP0 ;...
IFN FTTLAB,<
;ROUTINE TO HANDLE INPUT CLOSE OPERATION
TPCLSI: MOVE U,TDVUDB(F) ;UDB ADDRESS
SETZ T1, ;CLEAR AC
TDNE S,[LBLEOF,,IODEND] ;TAPE MARK OR EOF SEEN?
MOVEI T1,1 ;YES, SAY SO
PUSHJ P,LBLCHK ;NEED LABELING?
TLNN F,INPB ;YES - ANY INPUTS??
POPJ P, ;NO - RETURN
DPB T1,TUYINF ;SAVE TAPE MARK STATUS
MOVEI T1,LR.CLI ;SET REQUEST TYPE
JRST TPCLSX ;PICK UP COMMON CODE
;ROUTINE TO HANDLE CLOSE OUTPUT OPERATION
TPCLSO: MOVEI T1,LR.CLO ;SET REQUEST TYPE
TPCLSX::DPB T1,TUYRQT ; INTO UDB
TLO S,FSTOP!IOBEG ;SET FIRST OP ALSO
MOVEM S,DEVIOS(F) ;UPDATE STATUS
IFN FTMP,<
PUSHJ P,WAIT1## ;WAIT FOR IO TO STOP
SETZM DEVNBF(F) ;CLEAR COUNTERS OF NUMBER OF BUFS SWEPT FOR
SETZM DEVSBF(F)
> ;END IFN FTMP
PJRST LBLMSG ;INFORM LBL PCS
> ;END IFN FTTLAB
SUBTTL ENTER AND LOOKUP UUOS
IFN FTTLAB,<
; ENTER UUO
TPMENT: PUSHJ P,TPMLIB ;SET UP U AND LABEL INFO BLOCK
JRST CPOPJ1## ;NOT LABELED OR TAPE LABELER NOT RUNNING
JSP T4,TPMARG ;SAVE ACS AND SET POINTERS TO CALLER'S ARGS
MOVSI T2,TUSWTL## ;GET WRITE LOCKED BIT
TDNE T2,TUBSTS(U) ;CHECK STATUS
JRST LERWLK ;CAN'T DO ENTER UUOS ON W/L DEVICES
; FORMS CONTROL BYTE
MOVE T2,[.TFCNO,,.TRFDF] ;NO FORMS CONTROL AND DEFAULT RECORD FORMAT
; HRRI M,UUXFRW(P1) ;POINT TO FORMS CONTROL/RECORD FORMAT WORD
; CAIGE P2,UUXFRW ;ARG BLOCK CONTAIN THIS WORD?
; TDZA T1,T1 ;NO
; PUSHJ P,GETWDU## ;GET FROM ARG BLOCK
; SKIPN T1 ;WAS ONE SPECIFIED?
MOVE T1,T2 ;NO--USE DEFAULT
HLRZ T2,T1 ;GET FORMS CONTROL
DPB T2,TUYFCT ;STORE IT
; RECORD FORMAT BYTE
HRRI M,UUXBSZ(P1) ;POINT TO RECORD FORMAT WORD (BSZ)
CAIGE P2,UUXBSZ ;ARG BLOCK CONTAIN THIS WORD?
TDZA T1,T1 ;NO
PUSHJ P,GETWDU## ;GET FROM ARG BLOCK
LDB T1,[POINT 6,T1,29] ;GET RECORD FORMAT BYTE
SKIPN T1 ;WAS ONE SPECIFIED?
MOVEI T1,.TRFDF ;NO--DEFAULT
DPB T1,TUYRFM ;STORE RECORD FORMAT
; RECORD SIZE
LDB T2,PBUFSZ## ;GET BLOCK SIZE
SUBI T2,1 ;ACCOUNT FOR OFF BY ONE
LDB T1,TDYMOD ;GET THE MODE
IMUL T2,CPWTBL(T1) ;MULTIPLY BY CHARACTERS PER WORD
HRLZS T2 ;PUT IN LH
HRRI M,UUXRSZ(P1) ;POINT TO RECORD SIZE WORD IN ARG BLOCK
CAIGE P2,UUXRSZ ;ARG BLOCK CONTAIN THIS WORD?
TDZA T1,T1 ;NO
PUSHJ P,GETWDU## ;GET FROM ARG BLOCK
TLNN T1,-1 ;RZS SPECIFIED?
HLL T1,T2 ;NO--USE COMPUTED VALUE
MOVSS T1 ;PUT RZS IN RH, BSZ IN LH
DPB T1,TUYRSZ ;STORE RSZ
; BLOCK SIZE
HLRZS T1 ;GET BSZ
SKIPE T1 ;WAS ONE SPECIFIED?
DPB T1,TUYBSZ ;SET IT
; CREATION DATE
HRRI M,UUNATT(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXPRV(P1) ;YES
PUSHJ P,GETWDU## ;GET ATTRIBUTE WORD
LDB T4,[POINT 12,T1,35] ;KEEP ONLY LOW DATE
HRRI M,UUNEXT(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXEXT(P1) ;YES
PUSHJ P,GETWDU## ;GET EXTENSION WORD
LDB T1,[POINT 3,T1,20] ;GET HIGH DATE
DPB T1,[POINT 3,T4,23] ;MERGE LOW AND HIGH
SKIPN T4 ;USER SPECIFY A CREATION DATE?
MOVE T4,THSDAT## ;NO, USE TODAYS
DPB T4,TUYECR ;STORE IT
; EXPIRATION DATE
HRRI M,UUXDED(P1) ;BUT JUST IN CASE ...
CAIGE P2,UUXDED ;ARG BLOCK CONTAIN THIS WORD?
TDZA T1,T1 ;NO
PUSHJ P,GETWDU## ;GET EXPIRATION DATE
SKIPN T1 ;USER SPECIFY A DATE?
MOVE T1,THSDAT## ;ASSUME NO EXPIRATION DATE
DPB T1,TUYEEX ;STORE IT
; PROTECTION CODE
HRRI M,UUNATT(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXPRV(P1) ;YES
PUSHJ P,GETWDU## ;GET PROTECTION CODE
LSH T1,-^D27 ;POSITION
DPB T1,TUYPRT ;SAVE IT
; FILE SEQUENCE NUMBER
; HRRI M,UUXPSN(P1) ;POINT TO SEQUENCE NUMBER IN ARG BLOCK
; CAIGE P2,UUXPSN ;ARG BLOCK CONTAIN THIS WORD?
; TDZA T1,T1 ;NO
; PUSHJ P,GETWDU## ;GET IT
; SKIPE T1 ;WAS ONE SPECIFIED?
LDB T1,TUYPSN ;GET OLD SEQUENCE NUMBER
CAIG T1,0 ;MUST BE POSITIVE
MOVEI T1,1 ;CALL IT THE FIRST FILE
CAILE T1,^D999 ;THIS IS THE MAX
MOVEI T1,^D999 ;DON'T OVERFLOW
DPB T1,TUYPSN ;AND SAVE IT
; FILE NAME AND EXTENSION
MOVE T1,[ASCII | |] ;A WORD OF BLANKS
MOVSI T2,-4 ;4 WORDS
HRRI T2,TUBFNM(U) ;STARTING HERE
MOVEM T1,(T2) ;STORE A WORD OF BLANKS
AOBJN T2,.-1 ;BLANK OUT ENTIRE BLOCK
SETZM DEVFIL(F) ;CLEAR
SETZM DEVEXT(F) ; JUNK
HRRI M,UUNNAM(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXNAM(P1) ;YES
PUSHJ P,GETWDU## ;GET FILE NAME
SKIPN T1 ;NULL?
PUSHJ P,TPMDFE ;GENERATE DEFAULT FILE NAME AND EXTENSION
MOVEM T1,DEVFIL(F) ;STORE IN DDB
PUSHJ P,SIXOUT ;STORE IN TUB
MOVEI T1,"." ;GET A PERIOD
PUSHJ P,TPMTYO ;SEPARATE FILENAME FROM EXTENSION
SKIPN T1,DEVEXT(F) ;WAS EXTENSION DEFAULTED CUZ BLANK FILE NAME?
PUSHJ P,GETWD1## ;NO--GET EXTENSION FROM ENTER BLOCK
HLLZS T1 ;ZAR RH
MOVEM T1,DEVEXT(F) ;STORE IN DDB
PUSHJ P,SIXOUT ;STORE IN TUB
; GENERATION
MOVEI T2,0 ;NO GENERATION,,NO VERSION
; HRRI M,UUXGVR(P1) ;POINT TO FORMS CONTROL/RECORD FORMAT WORD
; CAIGE P2,UUXGVR ;ARG BLOCK CONTAIN THIS WORD?
; TDZA T1,T1 ;NO
; PUSHJ P,GETWDU## ;GET FROM ARG BLOCK
; SKIPN T1 ;WAS ONE SPECIFIED?
MOVE T1,T2 ;NO--USE DEFAULT
HLRZ T2,T1 ;GET GENERATION NUMBER
DPB T2,TUYGEN ;STORE IT
; VERSION
DPB T1,TUYVER ;STORE VERSION
PUSHJ P,TPMFOU ;DO FIRST OUTPUT PROCESSING
JRST LERLBL ;LABELING ERROR (ERROR CODE IN T1)
JRST CPOPJ1## ;RETURN
; STILL UNDER FTTLAB
; LOOKUP UUO
TPMLKP: PUSHJ P,TPMLIB ;SET UP U AND LABEL INFO BLOCK
JRST CPOPJ1## ;NOT LABELED OR TAPE LABELER NOT RUNNING
JSP T4,TPMARG ;SAVE ACS AND SET POINTERS TO CALLER'S ARGS
HRRI M,UUNNAM(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXNAM(P1) ;YES
PUSHJ P,GETWDU## ;GET REQUESTED FILE NAME
MOVEM T1,DEVFIL(F) ;SAVE IT
PUSHJ P,GETWD1## ;GET REQUESTED EXTENSION
HLLZM T1,DEVEXT(F) ;SAVE IT
SKIPE DEVFIL(F) ;LOOKING FOR A SPECIFIC FILE?
JRST TPMLK2 ;YES
SKIPE DEVEXT(F) ;(BLANK).EXT DOESN'T MAKE IT
JRST LERFNF ;CALL IT A FILE NOT FOUND ERROR
JRST TPMLK2 ;ENTER LOOKUP LOOP
TPMLK1: MOVEI T1,16 ;CODE TO FORWARD SPACE ONE FILE
PUSHJ P,MTAP0 ;DO IT
TPMLK2: PUSHJ P,TPMLIC ;CLEAR OUT LABEL INFO BLOCK
JFCL ;WILL ALWAYS SKIP HERE
PUSHJ P,TPMFIN ;DO FIRST INPUT PROCESSING
SKIPA ;LABELING ERROR
JRST TPMLK3 ;ONWARD
CAIE T1,LE.EOF ;EOF (LOOKUP READ FORWARD FAILED)?
CAIN T1,LE.BOT ;BOT (LOOKUP READ BACKWARDS FAILED)?
JRST LERFNF ;CONVERT TO FILE NOT FOUND
CAIE T1,LE.FNF ;SPECIFIC FILENAME.EXT LOOKUP FAILED?
JRST LERFNF ;YES
JUMPN T1,LERLBL ;ELSE IT MIGHT BE A FATAL LABELING ERROR
TPMLK3: SKIPN DEVFIL(F) ;LOOKING FOR A SPECIFIC FILE NAME?
JRST TPMLK4 ;NO--ANY ONE WILL DO
PUSHJ P,SIXINP ;GET FILE NAME FROM TAPE LABEL
CAME T1,DEVFIL(F) ;MATCH?
JRST TPMLK1 ;NO
CAIE T3,"." ;MUST BE A PROPER FILESPEC
JRST TPMLK1 ; OR IT'S NO GOOD
PUSHJ P,SIXINP ;GET EXTENSION
CAME T1,DEVEXT(F) ;MATCH?
JRST TPMLK1 ;NO
JRST TPMLK5 ;ONWARD
TPMLK4: PUSHJ P,SIXINP ;GET FILE NAME
MOVEM T1,DEVFIL(F) ;STORE IN DDB
HRRI M,UUNNAM(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXNAM(P1) ;YES
PUSHJ P,PUTWDU## ;RETURN THE FILE NAME WE FOUND
CAIE T3,"." ;LEGAL TOPS-10 FILESPEC?
TDZA T1,T1 ;NO--JUST RETURN A ZERO
PUSHJ P,SIXINP ;GET EXTENSION
HLLZS T1 ;EXTENSIONS ARE ONLY 3 CHARACTERS LONG
MOVEM T1,DEVEXT(F) ;STORE IN DDB
PUSHJ P,PUTWD1## ;STORE IT
TPMLK5:
; FORMS CONTROL BYTE
; LDB T2,TUYFCT ;GET FORMS CONTROL
; RECORD FORMAT BYTE
LDB T1,TUYRFM ;GET RECORD FORMAT BYTE
LSH T1,6 ;POSITION
HRRI M,UUXBSZ(P1) ;POINT TO RECORD FORMAT WORD (BSZ)
CAIL P2,UUXBSZ ;ARG BLOCK CONTAIN THIS WORD?
PUSHJ P,PUTWDU## ;YES--STORE IT
; RECORD SIZE / BLOCK SIZE
LDB T1,TUYRSZ ;GET RECORD SIZE FROM TAPE LABEL
HRLZS T1 ;PUT IN LH
LDB T2,TUYBSZ ;GET BLOCK SIZE FROM TAPE LABEL
IOR T1,T2 ;MAKE IT RSZ,,BSZ
HRRI M,UUXRSZ(P1) ;POINT TO RECORD SIZE WORD IN ARG BLOCK
CAIL P2,UUXRSZ ;ARG BLOCK CONTAIN THIS WORD?
PUSHJ P,PUTWDU## ;YES--STORE IT
; CREATION DATE
HRRI M,UUNATT(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXPRV(P1) ;YES
PUSHJ P,GETWDU## ;GET ATTRIBUTE WORD
LDB T4,TUYECR ;GET CREATION DATE FROM LABEL
LDB T2,[POINT 12,T4,35] ;KEEP ONLY LOW DATE
DPB T2,[POINT 12,T1,35] ;MOVE INTO EXISTING ATTRIBUTE WORD
PUSHJ P,PUTWDU## ;SET LOW DATE
HRRI M,UUNEXT(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXEXT(P1) ;YES
PUSHJ P,GETWDU## ;GET EXTENSION WORD
LDB T2,[POINT 3,T4,23] ;GET HIGH DATE FROM THE LABEL
DPB T2,[POINT 3,T1,20] ;MOVE INTO EXISTING EXTENSION WORD
PUSHJ P,PUTWDU## ;SET HIGH DATE
; EXPIRATION DATE
LDB T1,TUYEEX ;GET EXPIRATION DATE
HRRI M,UUXDED(P1) ;BUT JUST IN CASE ...
CAIL P2,UUXDED ;ARG BLOCK CONTAIN THIS WORD?
PUSHJ P,PUTWDU## ;YES--STORE IT
; PROTECTION CODE
HRRI M,UUNATT(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXPRV(P1) ;YES
PUSHJ P,GETWDU## ;GET EXISTING WORD
LDB T2,TUYPRT ;GET PROTECTION CODE FROM TAPE LABEL
DPB T2,[POINT 9,T1,8] ;MERGE INTO EXISTING WORD
PUSHJ P,PUTWDU## ;STORE IT
; FILE SEQUENCE NUMBER
; LDB T1,TUYPSN ;GET SEQUENCE NUMBER
; HRRI M,UUXPSN(P1) ;POINT TO SEQUENCE NUMBER IN ARG BLOCK
; CAIL P2,UUXPSN ;ARG BLOCK CONTAIN THIS WORD?
; PUSHJ P,PUTWDU## ;YES--STORE WORD
; GENERATION
; LDB T2,TUYGEN ;GET GENERATION
; VERSION
; LDB T1,TUYVER ;GET VERSION
; HRL T1,T2 ;PUT IN ONE WORD
; HRRI M,UUXGVR(P1) ;POINT TO FORMS CONTROL/RECORD FORMAT WORD
; CAIL P2,UUXGVR ;ARG BLOCK CONTAIN THIS WORD?
; PUSHJ P,PUTWDU## ;YES--STORE WORD
JRST CPOPJ1## ;AND RETURN
; STILL UNDER FTTLAB
; INITIALIZE LABEL INFORMATION BLOCK IN THE TUB FOR ENTER
; AND LOOKUP UUOS. RETURNS CPOPJ1 IF PROCESSING LABELED
; TAPES AND THIS TAPE IS LABELED.
TPMLIB: PUSHJ P,NULTST## ;CHECK FOR NUL
POPJ P, ;RETURN IF THE NUL DEVICE
SETZM DEVFIL(F) ;CLEAR FILE NAME
SETZM DEVEXT(F) ;CLEAR EXTENSION
MOVE U,TDVUDB(F) ;POINT TO UDB FOR THIS DDB
TLO S,FSTOP ;SET UP
MOVEM S,DEVIOS(F) ; FIRST I/O
PUSHJ P,LBLCKM ;TAPE LABELED AND TAPE LABELER RUNNING?
SKIPA ;YES
POPJ P, ;NOTHING MORE TO DO
LDB T1,TUYLTP ;GET LABEL TYPE
CAIL T1,LT.SL ;ANSI?
CAILE T1,LT.IUL ;IBM?
POPJ P, ;NO
; HERE TO JUST RE-INITIALIZE THE LABEL INFO BLOCK
TPMLIC: LDB T1,TUYPSN ;SAVE CURRENT SEQUENCE NUMBER
SETZM TUBLIB(U) ;CLEAR FIRST WORD OF LABEL STORAGE AREA
IFE FTXMON,<
MOVSI T2,TUBLIB(U) ;START OF LABEL INFO BLOCK
HRRI T2,TUBLIB+1(U) ;MAKE A BLT POINTER
BLT T2,TUBLIB+TLPMAX-1(U) ;CLEAR ENTIRE BLOCK
> ;END IFE FTXMON
IFN FTXMON,<
PUSH P,T1 ;SAVE FROM DESTRUCTION
MOVEI T1,TLPMAX ;LENGTH
XMOVEI T2,TUBLIB(U) ;STARTING ADDRESS
XMOVEI T3,TUBLIB+1(U) ;MAKE A BLT POINTER
EXTEND T1,[XBLT] ;COPY
POP P,T1 ;RESTORE T1
> ;END IFN FTXMON
DPB T1,TUYPSN ;RESTORE FILE SEQUENCE NUMBER
MOVE T1,TUYFNM ;GET BYTE POINTER TO FILE.EXT
MOVEM T1,TUBPTR(U) ;STORE WORKING COPY
TLO S,FSTOP ;SET UP
MOVEM S,DEVIOS(F) ; FIRST I/O
JRST CPOPJ1## ;RETURN
; SAVE ACS AND SET UP POINTERS TO CALLER'S ARG BLOCK
TPMARG: PUSHJ P,SAVE4## ;SAVE SOME ACS
HRRZ P1,M ;SAVE UVA OF ARG BLOCK
PUSHJ P,GETWDU## ;GET FIRST WORD
TLNN T1,-1 ;4-WORD OR EXTENDED BLOCK
TRZA T1,RB.BIT ;EXTENDED
TDZA P2,P2 ;4-WORD, SO ZERO LENGTH
MOVE P2,T1 ;ELSE COPY EXTENDED LENGTH TO A SAFE PLACE
MOVE T1,P1 ;START ADDRESS OF ARG BLOCK
SKIPN T2,P2 ;EXTENDED?
MOVEI T2,4 ;4-WORD
PUSHJ P,ARNGE## ;RANGE CHECK
JRST UADERR# ;ADDRESS CHECK
JFCL ;ADDRESS OK BUT ILLEGAL FOR I/O (IGNORED HERE)
JRST (T4) ;RETURN
; FIRST I/O
TPMFIN: SKIPA T1,[LR.FIN] ;FIRST INPUT
TPMFOU: MOVEI T1,LR.FOU ;FIRST OUTPUT
DPB T1,TUYRQT ;SET FOR TAPE LABELER
MOVEI T1,77 ;GET LABEL READ FUNCTION CODE
DPB T1,TUYINF ;SET IT
PUSHJ P,LBLMSG ;GIVE PULSAR A KICK
LDB T1,PDVESE## ;GET EXTENDED ERROR STATUS SET BY LABELER
JUMPN T1,CPOPJ## ;LABELING ERROR IF NON-ZERO
JRST CPOPJ1## ;RETURN
; GENERATE A DEFAULT FILE NAME AND EXTENSION
TPMDFE: LDB T1,TUYPSN ;GET CURRENT SEQUENCE NUMBER
MOVEI T4,3 ;EXTENSION IS THREE CHARACTERS
TPMDF1: IDIVI T1,12 ;DIVIDE BY 10
ADDI T2,'0' ;MAKE SIXBIT
LSHC T2,-6 ;SAVE CHARACTER
SOJG T4,TPMDF1 ;LOOP
HLLZM T3,DEVEXT(F) ;SET EXTENSION
MOVE T1,['FILE '] ;DEFAULT
MOVEM T1,DEVFIL(F) ; FILE NAME
POPJ P, ;AND RETURN
; CHARACTER TYPER FOR FILE NAME AND EXTENSION GENERATION
TPMTYO: IDPB T1,TUBPTR(U) ;PUT CHARACTER
POPJ P, ;RETURN
; ROUTINE TO TYPE A SIXBIT WORD FOR FILE.EXT PROCESSING
SIXOUT: SKIPN T2,T1 ;COPY WORD
POPJ P, ;NOTHING TO DO
SIXOU1: LSHC T1,6 ;SHIFT IN A CHARACTER
ANDI T1,77 ;NO JUNK
ADDI T1,40 ;CONVERT SIXBIT TO ASCII
IDPB T1,TUBPTR(U) ;STORE CHARACTER
JUMPN T2,SIXOU1 ;LOOP
POPJ P, ;RETURN
; ROUTINE TO GET A SIXBIT WORD FOR FILE.EXT PROCESSING
SIXINP: SETZ T1, ;CLEAR DESTINATION
MOVE T2,[POINT 6,T1] ;BYTE POINTER
SIXIN1: ILDB T3,TUBPTR(U) ;GET CHARACTER
CAIN T3,"-" ;DASH?
JRST SIXIN2 ;YES
CAIL T3,"0" ;CHECK
CAILE T3,"9" ; DIGITS
CAIL T3,"A" ;CHECK
CAILE T3,"Z" ; LETTERS
POPJ P, ;NO MATCH
SIXIN2: SUBI T3,40 ;CONVERT ASCII TO SIXBIT
TRNN T1,77 ;WORD FULL?
IDPB T3,T2 ;NO--STORE CHARACTER
JRST SIXIN1 ;LOOP
; ERROR HANDLING
LERFNF: MOVEI T4,FNFERR ;FILE NOT FOUND
JRST LERERR
LERWLK: MOVEI T4,WLKERR ;WRITE-LOCKED
JRST LERERR
LERACS: MOVEI T4,ACSERR ;ADDRESS CHECK STORING ANSWERS
JRST LERERR
LERLBL: MOVEI T4,LBLERR ;TAPE LABELING ERROR
LERERR: HRRI M,UUNEXT(P1) ;4-WORD
SKIPE P2 ;EXTENDED?
HRRI M,UUXEXT(P1) ;YES
PUSHJ P,GETWDU## ;GET EXTENSION WORD
HRR T1,T4 ;GET ERROR CODE
PUSHJ P,PUTWDU## ;STORE IT
POPJ P, ;RETURN
> ;END IFN FTTLAB FROM WAY BACK
SUBTTL MTACHR AND MTARID UUO'S
;MTACHR UUO
MTACHR::HLRE T2,T1 ;GET LH ARG FROM USER
JUMPLE T2,MTACHX ;JUMP IF OLD STYLE
SUBI T2,1 ;ACCOUNT FOR WORD USED TO PASS DEVICE NAME
CAILE T2,TPCHMX ;CHECK RANGE
JRST MTACHX ;MIGHT BE NUMERIC LOGICAL NAME
PUSHJ P,SAVE1## ;SAVE P1
MOVN P1,T2 ;NEGATE LEN IN P1
HRLZS P1 ;TO LH
HRR M,T1 ;FIXUP M TO POINT TO USER AREA
PUSHJ P,GETWRD## ;GET FIRST WORD OF BLOCK
JRST RTM1## ;OUT OF BOUNDS
PUSHJ P,MTACHS ;SCAN FOR DDB (ARG IN T1)
JRST RTM1## ;NO SUCH MTA
;RETURN DDB IN F, UDB IN U
HRRI P1,TUBRID ;OFFSET INTO UDB
PUSHJ P,TPMCPY ;COPY DATA
POPJ P, ;OUT OF BOUNDS
MOVE T1,TUBCHR(U) ;GET CHARACTERISTICS WORD
PJRST STOTC1## ;STORE IN AC AND EXIT
;HERE WHEN ARG IS CHL # OR DEVICE NAME
MTACHX: PUSHJ P,MTACHS ;LOOK FOR DDB (ARG IN T1)
PJRST RTM1## ;NO SUCH MTA
PJRST STOTC1## ;STORE T1
MTARID::PUSHJ P,PRVJ## ;NEED PRIVS
PUSHJ P,MTAIDD ;FIND DDB
PJRST RTM1## ;NO PRIVS OR NO DDB
MOVE T1,DEVMOD(F) ;MAKE SURE ITS AN MTA
MOVE U,TDVUDB(F) ;UDB ADDRESS
TLNN T1,DVTTY ;...
TLNN T1,DVMTA ;....
JRST RTM1## ;ERROR RETURN
PUSHJ P,GETWD1## ;GET REEL ID
MOVEM T1,TUBRID(U) ;STORE IN UDB
PJRST CPOPJ1## ;GIVE SKIP RETURN
;ROUTINE TO FIND A DDB FOR THE MTAID. UUO.
;CALL: MOVE T1,ARG
; PUSHJ P,MTAIDD
; RETURN HERE IF NO SUCH DEVICE
; RETURN HERE WITH F=DDB ADDRESS
MTAIDD: JUMPL T1,MTAID1 ;IF ARG IS AN
CAIG T1,HIGHXC## ; OPEN CHANNEL,
PJRST DVCNSG## ; LET DVCNSG FIND IT
MTAID1: PUSHJ P,DEVSRC## ;LOOK FOR PHYSICAL OR LOGICAL MATCH
CAIA ;NONE FOUND
JRST CPOPJ1## ;FOUND IT
TRNE T1,-1 ;LOSE IF GENERIC MTA
TRNE T1,7777 ;OR IF NOT MTAU
POPJ P,
MOVEI T3,0 ;NO RESTRICTIONS ON DVSTAS
PUSHJ P,DVASRC## ;LOOK FOR MTAU
SKIPGE T4 ;IF FOUND BUT ASSIGNED TO SOMEONE ELSE,
JRST CPOPJ1## ;RETURN SUCCESS
POPJ P, ;NOT FOUND
;ROUTINE TO SCAN FOR MTA DDB AND SET UP F AND U
;CALLED WITH T1 := SOMETHING THAT DVCNSG LIKES
;ALSO UPDATE TUBCHR AND RETURN INFO IN T1
MTACHS: PUSHJ P,DVCNSG## ;LOOK FOR DDB
POPJ P, ;ERROR RETURN
MOVSI T1,DVMTA ;CHECK FOR MTA DDB
TDNN T1,DEVMOD(F) ;...
POPJ P, ;NOPE - ERROR
MOVE U,TDVUDB(F) ;UDB ADDRESS
PUSHJ P,GETDEN ;GET CURRENT DENSITY
LDB T2,TDYDEN ;UNLESS ACTUAL KNOWN
SKIPE T2 ;IS IT?
MOVE T1,T2 ;YES, GIVE THEN THE REAL THING
DPB T1,[POINT 3,TUBCHR(U),35]
MOVEI T1,1B31+1B32 ;BITS FOR TUBCHR
MOVEI T2,TUC7TK## ;CHECK 7 TRACK
TDNN T2,TUBCNF(U) ;IS IT?
TRZ T1,1B31 ;NO - CLEAR BIT
MOVSI T2,TUSWTL## ;CHECK WRITE LOCKED
TDNN T2,TUBSTS(U) ;IS IT?
TRZ T1,1B32 ;NO - CLEAR BIT
IORM T1,TUBCHR(U) ;SET APPROPRIATE BITS
TRC T1,1B31+1B32 ;COMPLEMENT BITS
ANDCAB T1,TUBCHR(U) ;AND CLEAR OTHERS
JRST CPOPJ1## ;GIVE GOOD RETURN
SUBTTL TAPOP. UUO
;TAPOP. UUO OR CALLI 154
;UUO TO PERFORM MISCELLANEOUS FUNCTIONS FOR A SPECIFIC TAPE UNIT
;CALL: MOVE AC,[+N,,ADR]
; CALLI AC,154
; ERROR RETURN
; NORMAL RETURN
UTAPOP::PUSHJ P,SAVE4## ;SAVE AC'S
MOVE P4,T1 ;SAVE USER ARG IN P4
HRR M,T1 ;ADDRS OF BLOCK
HLRE T2,T1 ;GET LENGTH
CAIL T2,2 ;VALID LENGTH?
PUSHJ P,GETWRD## ;YES - GET ARG (FCN CODE)
PJRST ECOD4## ; NO - ERROR
JUMPLE T1,RTZER## ;RETURN 0 IF BAD FCN
HRR P1,T1 ;SAVE FCN IN P1
PUSHJ P,GETWR1## ;GET NEXT ARG (DEVICE SPEC)
PJRST ECOD4##
PUSHJ P,DVCNSG## ;SEARCH FOR IT
PJRST ECOD2## ;NO SUCH
CAIN F,DSKDDB## ;IS IT NUL?
CAME T1,[SIXBIT/NUL/]
SKIPA T1,DEVMOD(F) ;CHECK ON TAPE UNIT
JRST CPOPJ1## ;YES, GOOD RETURN
TLNN T1,DVMTA ;...
PJRST ECOD2## ;NOPE
TLNE T1,DVTTY ;CHECK IF ALSO TTY
PJRST CPOPJ1## ;NUL WINS
MOVE S,DEVIOS(F) ;SET UP STATUS
TRNN P1,1000 ;IF NOT A READ FNCN
PUSHJ P,WAIT## ;WAIT FOR ALL IO TO COMPLETE
MOVE U,TDVUDB(F) ;UDB ADDRESS
HRRZ T1,P1 ;GET FCN CODE
TRNE T1,3000 ;READ/SET CODE?
JRST TAPRSQ ;YES - GO HANDLE
CAIG T1,TAPLN0 ;NO - CHECK LEGAL
SKIPN P3,TAPTB0-1(T1) ;EXISTS?
PJRST RTZER## ;ILLEGAL FCN CODE
TLNN P3,(TAP.NP) ;NEED POKE PRIVS?
JRST CHKRED ;NO - TRY OTHERS
MOVSI T1,JP.POK ;YES - CHECK HIS PRIVS
PUSHJ P,PRVBIT## ;...
PJRST 0(P3) ;OK - DISPATCH
JRST ECOD1## ;NO - GIVE ERROR RETURN
CHKRED: TLNN P3,(TAP.RP) ;NEED READ PRIVS?
JRST CHKWRT ;NO - PROCEED
PUSHJ P,TREDOK ;YES - CHECK THEM
PJRST ECOD1## ;NOT ENOUGH PRIVS
CHKWRT: TLNN P3,(TAP.WP) ;NEED WRITE PRIVS?
PJRST 0(P3) ;NO - JUST CALL ROUTINE
PUSHJ P,TWRTOK ;YES - CHECK THEM
PJRST ECOD1## ;NOT ENOUGH
PJRST 0(P3) ;DISPATCH
;HERE IF FCN CODE IS IN THE RANGE 2000-3777
TAPRSQ: ANDI P1,777 ;MASK FCN CODE
CAIL T1,3000 ;POSSIBLE CUSTOMER-DEFINED FUNCTION?
JRST TAPCUS ;MAYBE, GO SEE
TRZE T1,1000 ;READ CODE?
JRST TAPRED ;YES - TRY IT
CAIGE T1,2000+TAPLN1 ;CHECK RANGE
SKIPN P3,TAPTB1(P1) ; AND VALIDITY
PJRST RTZER## ;INVALID
HLRZ T2,P4 ;CHECK ARG LIST
CAIL T2,3 ;AT LEAST 3
PUSHJ P,GETWR1## ;GET NEXT ARG
PJRST ECOD4## ;ADDRS ERROR
MOVE P2,T1 ;SAVE IT IN P2
PUSHJ P,TWRTOK ;CHECK WRITE PRIVS
PJRST ECOD1## ;ERROR RETURN
LDB T1,TAPSYR ;LEGAL - RANGE CHK REQ'D?
JUMPE T1,TAPST1 ;JUMP IF NO
TLNE P3,(TAP.FC) ;SETTING FRAME-COUNT?
JUMPE P2,TAPST1 ;YES, 0 IS LEGAL
MOVE T2,TAPSRT-1(T1) ;MAX VALUE IN RH
HLRZ T3,T2 ; MIN VALUE IN LH
CAIG P2,(T2) ;.GT. MAX VALUE?
CAIGE P2,(T3) ; OR .LT. MIN VALUE?
PJRST ECOD3## ;ARG OUT OF RANGE
TLNN P3,(TAP.FC) ;SETTING FRAME COUNTER?
JRST TAPST1
LDB T2,TDYMOD ;YES, DO WE KNOW MODE?
JUMPE T2,TAPST1
MOVE T1,P2 ;YES, CONVERT TO NUMBER OF WORDS
IDIV T1,TMODTB##(T2)
SKIPE T2
ADDI T1,1
ADDI T1,1 ;ALLOW FOR OVERHEAD WORD
DPB T1,PBUFSZ## ;AND SAVE BUFFER SIZE
TAPST1: TLNE P3,(TAP.SA!TAP.FC) ;SET ALLOWED?
JRST TAPST2 ;YES - DO IT
TLNN P3,(TAP.PS) ;NO - NEED PRIVS
PJRST ECOD5## ;NOHOW!
MOVSI T1,JP.POK ;NEED PRIVS TO SET
PUSHJ P,PRVBIT## ;GO CHECK
SKIPA ;OK RETURN
PJRST ECOD1## ;NOPE
TAPST2: TLNE P3,(TAP.DN) ;SETTING DENSITY?
JRST TAPDEN ;YES, DO IT
IFN FTTLAB,<
TLNE P3,(TAP.LT) ;SETTING LABEL TYPE?
JRST TAPLBT ;YES, DO IT
> ;END FTTLAB
TLNE P3,(TAP.SP)
JRST 0(P3)
DPB P2,0(P3) ;SET BIT (BYTE)
JRST CPOPJ1## ;DONE
TAPDEN: SKIPN T1,P2 ;DEFAULT SPECIFIED?
PUSHJ P,GETDN1 ;YES, SET IT UP
MOVEI T3,TUCD20## ;GET LOWEST DENSITY
LSH T3,-1(T1) ;CONVERT DENSITY TO BIT POSITION
TDNN T3,TUBCNF(U) ;SETTING VALID DENSITY?
JRST ECOD15## ;NO, ERROR
DPB T1,0(P3) ;SET THE DENSITY
IFN FTTLAB,<
TLZ T1,(ST.FAC) ;REQUEST DENSITY CHANGE
PUSHJ P,SETODN ; THEN SET OTHER DDB
> ;END IFN FTTLAB
JRST CPOPJ1## ;RETURN OK
;SET LABEL TYPE
IFN FTTLAB,<
TAPLBT: DPB P2,TUYLTP ;SET THE LABEL TYPE
MOVE T1,UDBDDB(U) ;GET THE REAL DDB ADDRESS
MOVSI T2,DVDIR ;GET DIRECTORY DEVICE BIT
ANDCAM T2,DEVMOD(T1) ;ASSUME NOT LABELED
CAIL P2,LT.SL ;SOME FLAVOR OF
CAILE P2,LT.IUL ; ANSI OR IBM LABELS?
SKIPA ;NO
IORM T2,DEVMOD(T1) ;LITE DIRECTORY BIT FOR USER PROGRAMS
JUMPN P2,CPOPJ1## ;NOT BLP, RETURN
DPB P2,PDVESE## ;CLEAR LAST LABELING ERROR
TLZ S,LBLNED+LBLWAT+LBLSTP+LBLEOF+FSTOP
MOVEM S,DEVIOS(F) ;CLEAR LABEL BITS AND SAVE
JRST CPOPJ1## ;RETURN
> ;END IFN FTTLAB
;HERE TO HANDLE READ FUNCTIONS
TAPRED: CAIGE T1,TAPLN1 ;CHECK VALID ARG
SKIPN TAPTB1(P1) ; AND EXISTANCE
PJRST RTZER## ;RETURN ZERO
PUSHJ P,TREDOK ;CHECK PRIVS
PJRST ECOD1## ;NOPE
MOVE P3,TAPTB1(P1) ;GET TABLE ENTRY
TLNE P3,(TAP.DN) ;DENSITY?
JRST TAPRD1 ;YES - SPECIAL
TLNE P3,(TAP.SP) ;SPECIAL ROUTINE?
JRST 0(P3) ;YES - CALL IT
LDB T1,0(P3) ;NO - GET VALUE
TLNE P3,(TAP.MD) ;MODE READ?
PUSHJ P,GTMODE ;YES, FIND OUT WHAT WE HAVE
PJRST STOTC1## ;STORE VALUE & SKIP RETURN
;HERE TO HANDLE DENSITY READ
TAPRD1: PUSHJ P,GETDEN ;GET DENSITY ARG
LDB T2,TDYDEN ;UNLESS ACTUAL KNOWN
SKIPE T2 ;IS IT?
MOVE T1,T2 ;YES, GIVE THEN THE REAL THING
PJRST STOTC1## ;STORE ETC.
;ROUTINES TO CHECK PRIVS FOR READ OR WRITE
TREDOK: PUSHJ P,SAVE2## ;SAVE P1,P2
MOVSI P1,PVSPYM!PVSPYA ;SPY PRIVS
JRST CKMTA
TWRTOK: PUSHJ P,SAVE2## ;SAVE P1,P2
MOVSI P1,JP.POK ;POKE PRIVS
CKMTA: LDB P2,PJOBN## ;GET OWNERS JOB #
CAMN P2,J ;IS IT US?
JRST CPOPJ1## ;YES - DO WHAT U WANT
EXCH P1,T1 ;NO - FURTHER CHECKING REQ'D
PUSHJ P,PRVBIT##
AOS (P) ;OK - SET FOR SKIP
MOVE T1,P1 ;RESTORE T1
POPJ P, ;RETURN
;HERE FOR POSSIBLE CUSTOMER-DEFINED TAPOP. UUO FUNCTION
TAPCUS: CAIGE T1,3000+TAPLC0 ;IN RANGE?
SKIPN TAPTC0(P1) ;AND EXISTS?
PJRST RTZER## ;NO, RETURN ZERO
PUSHJ P,TREDOK ;CHECK PRIVILEGES
JRST ECOD1## ;NO PRIVILEGES
MOVE P3,TAPTC0(P1) ;GET TABLE ENTRY
TLNE P3,(TAP.SP) ;SPECIAL ROUTINE?
PJRST (P3) ;YES, DISPATCH TO IT
LDB T1,(P3) ;NO, GET VALUE
PJRST STOTC1## ;STORE IT AND RETURN
;TABLES FOR TAPOP. UUO
;CONTENTS OF TAPTB0 ARE AS FOLLOWS
;BITS 0-5 ARE CORRESPONDING MTAPE CODE IF ANY
;BITS 6-12 ARE FLAGS FOR DETERMINING VALIDITY
;RH IS ROUTINE ADDRS
TAP.RP==1B6 ;NEED READ PRIVS FOR THIS FCN
TAP.WP==1B7 ;NEED WRITE PRIVS FOR THIS FCN
TAP.NP==1B8 ;NEED JACCT / [1,2] PRIVS
DEFINE TMAC(MTCOD,BITS,ROU),<
EXP <MTCOD>B5+BITS+ROU
>
TAPTB0: TMAC (MT.WAT,TAP.RP,TAPOPM) ;1 - WAIT FOR UNIT AVAIL
TMAC (MT.REW,TAP.WP,TAPOPM) ;2 - REWIND
TMAC (MT.UNL,TAP.WP,TAPOPM) ;3 - REWIND & UNLOAD
TMAC (MT.FSR,TAP.WP,TAPOPM) ;4 - SKIP RECORD
TMAC (MT.FSF,TAP.WP,TAPOPM) ;5 - SKIP FILE
TMAC (MT.SET,TAP.WP,TAPOPM) ;6 - SKIP TO LEOT
TMAC (MT.BSR,TAP.WP,TAPOPM) ;7 - BACKSPACE RECORD
TMAC (MT.BSF,TAP.WP,TAPOPM) ;10 - BACKSPACE FILE
TMAC (MT.WTM,TAP.WP,TAPOPM) ;11 - WRITE TAPE MARK
TMAC (MT.WLG,TAP.WP,TAPOPM) ;12 - WRITE LONG GAP
TMAC (0,TAP.WP,TPMDSE) ;13 - DATA SECURITY ERASE
TMAC (0,TAP.WP,TPMWET) ;14 - WRITE LEOT
IFN FTTLAB,<
TMAC (0,TAP.NP,TPMLBG) ;15 - LABEL GET
TMAC (0,TAP.NP,TPMLBR) ;16 - LABEL RELEASE
TMAC (0,TAP.NP,TPMLSU) ;17 - SWAP UNITS
TMAC (0,TAP.NP,TPMLDD) ;20 - DESTROY LABEL DDB
TMAC (0,TAP.WP,TPMFEV) ;21 - FORCE EOV
TMAC (0,TAP.WP,TPMURQ) ;22 - USER REQUEST
> ;END IFN FTTLAB
IFE FTTLAB,< ;;; DUMMIES
0 ;15
0 ;16
0 ;17
0 ;20
0 ;21
0 ;22
> ;END IFE FTTLAB
TMAC (0,TAP.NP,TPMSMM) ;23 - SET MAINT MODE
TMAC (0,TAP.NP,TPMCMM) ;24 - CLEAR MAINT MODE
TMAC (0,TAP.NP,TPMCEC) ;25 - CLEAR ERROR COUNTERS
IFN FTPATT,<EXP CPOPJ##> ;ROOM FOR PATCHING
TAPLN0==.-TAPTB0
;CONTENTS OF TAPTB1 ARE AS FOLLOWS
;BITS 0-5 ARE INDEX INTO RANGE TABEL IF ANY
;BITS 6-12 ARE FLAGS FOR DETERMINING VALIDITY
;RH IS ADDRS OF BYTE PNTR
TAP.DN==1B6 ;SPECIAL DENSITY ACTION
TAP.SA==1B7 ;SET ALLOWED
TAP.PS==1B8 ;PRIV SET ONLY
TAP.SP==1B9 ;SPECIAL ACTION
TAP.FC==1B10 ;SET FRAME COUNT
TAP.MD==1B11 ;MODE (ASCII, CORE-DUMP, ...)
TAP.LT==1B13 ;SET LABEL TYPE
TAPTB1: TMAC (0,0,<[POINT 36,TUBFES(U),35]>) ;1000 - FINAL ERROR DISPOSITION
TMAC (1,TAP.DN+TAP.SA,TDYDN1) ;1001 - DENSITY
TMAC (0,0,TUYKTP) ;1002 - KONTROLLER TYPE
TMAC (0,TAP.SA,<[POINT 1,TDVSTS(F),0]>) ;1003 - READ BACKWARDS
TMAC (0,TAP.SA,<[POINT 1,TDVSTS(F),1]>) ;1004 - LOW THRESHOLD
TMAC (0,TAP.SA,<[POINT 1,DEVIOS(F),^L<IOPAR>]>) ;1005 - EVEN PARITY
TMAC (2,TAP.SA!TAP.SP,TAPBKS) ;1006 - BLOCKSIZE
TMAC (3,TAP.SA!TAP.MD,TDYMOD) ;1007 - MODE
TMAC (0,TAP.PS,<[POINT 1,TUBCNF(U),18]>) ;1010 - TRACK INFO
TMAC (0,0,<[POINT 1,TUBSTS(U),2]>) ;1011 - WRITE LOCK
TMAC (0,0,<[POINT 36,TUBCCR(U),35]>) ;1012 - CHAR CNT
TMAC (0,TAP.PS,<[POINT 36,TUBRID(U),35]>) ;1013 - REELID
TMAC (0,0,PMTCRC) ;1014 - CRC
TMAC (0,0,<[POINT 18,TUBSTS(U),17]>) ;1015 - UNIT STATUS
TMAC (0,TAP.SP,TAPSTS) ;1016 - STATISTICS
TMAC (0,0,<[POINT 36,TUBIEP(U),35]>) ;1017 - INITIAL ERROR POINTER
TMAC (0,0,<[POINT 36,TUBFEP(U),35]>) ;1020 - FINAL ERROR POINTER
TMAC (0,TAP.SP,TAPIES) ;1021 - INITIAL ERROR STATS
TMAC (0,TAP.SP,TAPFES) ;1022 - FINAL ERROR STATS
TMAC (0,0,<[POINT 36,TUBTRY(U),35]>) ;1023 - # RETRIES
IFN FTTLAB,<
TMAC (4,TAP.PS+TAP.LT,TUYLTP) ;1024 - READ/SET LABEL TYPE
TMAC (4,TAP.PS+TAP.LT,TUYLTP) ;1025 - READ/SET LABEL TYPE
TMAC (0,0,PDVESE) ;1026 - LABEL TERMINATION CODE
> ;END IFN FTTLAB
IFE FTTLAB,< ;;; DUMMIES
0 ;1024
0 ;1025
0 ;1026
> ;END IFE FTTLAB
TMAC (0,TAP.PS,<[POINT 1,TUBCNF(U),20]>) ;1027 - DIAG MODE SET
TMAC (0,TAP.PS,<[POINT 1,TUBCNF(U),21]>) ;1030 - FORCE SENSE
TMAC (5,TAP.FC,PBUFRM) ;1031 : MAX FRAME COUNT
TMAC (0,0,<[POINT 5,TUBCNF(U),27]>) ;1032 - DENSITY CAPABILITIES
IFN FTTLAB,<
TMAC (0,TAP.SP!TAP.SA,TAPRLP) ;1033 - READ LABEL PARAMETERS
> ;END IFN FTTLAB
IFE FTTLAB,<
0 ;1033 - DUMMY
> ;END IFE FTTLAB
TAPLN1==.-TAPTB1
;RANGE TABLE FOR TAPOP UUO
TAPSRT: 0,,5 ;1 - DENSITY
<NOISE##/4>,,377777 ;2 - BLOCKSIZE
0,,5 ;3 - MODE
IFN FTTLAB,< 0,,LT.MAX ;4 - LABEL TYPE>
IFE FTTLAB,< 0>
NOISE##,,<^D4095*6>-1 ;5 - MAX FRAME-COUNT
TAPSYR: POINT 6,TAPTB1(P1),5 ;POINTER TO RANGE INDEX
TAPMTP: POINT 6,TAPTB0-1(P1),5 ;POINTER TO MTAPE EQUIVALENT
;CONTENTS OF TAPTC0 ARE AS FOLLOWS
;BITS 0-5 ARE INDEX INTO RANGE TABLE (IF ANY)
;BITS 6-12 ARE FLAGS FOR DETERMINING VALIDITY
;BITS 18-35 IS ADDRESS OF BYTE POINTER OR SPECIAL ROUTINE
TAPTC0: ;CUSTOMER FUNCTIONS GO HERE
TAPLC0==.-TAPTC0 ;LENGTH OF CUSTOMER-DEFINED TABLE
;ROUTINE TO LINK TAPOP. FCNS TO MTAPE FCNS
TAPOPM: PUSHJ P,PIOSET ;SET UP ACS, UDB, ETC.
JUMPE J,ECOD6## ;ERROR IN NO OWNER
LDB T1,TAPMTP ;GET MTAPE FCN CODE
HRR M,T1 ;MAKE M LOOK LIKE IN MTAPE
PUSH P,T1 ;SAVE MTAPE FUNCTION CODE
PUSHJ P,MTAP0 ;ISSUE MTAPE COMMAND
POP P,T1 ;RESTORE FUNCTION CODE
CAIE T1,MT.WTM ;WRITE TAPE MARK OR
CAIN T1,MT.WLG ;LONG GAP?
SKIPA
PJRST CPOPJ1## ;NO, SKIP RETURN
MOVEI P2,RB.FYB ;YES, MAKE YELLOW BALL IORB
PUSHJ P,GENIOR ;SO WE KNOW WHEN THE WRITE IS DONE
JRST TAPOP1 ;CAN'T QUEUE, JUST TEST
MOVEM T1,TDVIOR(F)
XMOVEI T2,TPMNOP ;HACK LOCATION
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWAT
PUSHJ P,TAPRQT## ;PLACE AT END OF QUEUE
PUSHJ P,KONWAT ;WAIT FOR CONTROLLER
PUSHJ P,TPMFLX ;FLUSH THIS REQUEST
TAPOP1: MOVE S,DEVIOS(F) ;SET UP S
TRNE S,IOIMPM ;TO CHECK FOR WRITE LOCK
PJRST ECOD16## ;CAUSE ERROR RETURN
PJRST CPOPJ1## ;ALL OK
;SPECIAL ROUTINE FOR BLOCKSIZE
TAPBKS: HRR M,P4 ;GET FUNCTION
PUSHJ P,GETWRD## ;GET USER'S FUNCTION
JRST ECOD4 ;ADDRESS ERROR
TRNE T1,2000 ;READ OR SET?
JRST TAPSBS ;SET
LDB T1,PBUFSZ## ;GET IT
JRST STOTC1 ;STORE AND GOOD RETURN
;HERE TO SET BLOCKSIZE
TAPSBS: LDB T1,TUYKTP## ;GET KONTROLLER TYPE
CAILE T1,K.MAX ;DO WE KNOW ABOUT IT?
JRST ECOD3## ;NO--CALL IT OUT OF RANGE
MOVE T2,UDBKDB(U) ;GET KDB ADDRESS
MOVE T2,KDBDSP(T2) ;AND IT'S DISPATCH TABLE
CAMLE P2,TPKBSZ(T2) ;OK FOR THIS KONTROLLER TYPE?
JRST ECOD3## ;NO, OUT OF RANGE ERROR
DPB P2,PBUFSZ## ;DO IT
JRST CPOPJ1## ;AND GOOD RETURN
;SPECIAL ROUTINE FOR STATISTICS (1016)
;LH(P4) := LEN OF ARG BLOCK , RH(M) := LOC OF LAST ARG
TAPSTS: HLRZ T2,P4 ;GET LENGTH
SUBI T2,2 ;CORRECT FOR ARGS
JUMPLE T2,ECOD4## ;NOT ENOUGH ARGS
CAILE T2,TPCHMX ;COMPARE AGAINST MAX
MOVEI T2,TPCHMX ;OUT OF RANGE - USE MAX
MOVN P1,T2 ;NEGATE LENGTH
HRLZS P1 ;MOVE TO LH
HRRI P1,TUBRID ;BASE OFFSET TO STATISTICS
TPMCPY: HRRZ T1,P1 ;GET UDB OFFSET
ADD T1,U ;RELOCATE
MOVE T1,(T1) ;FETCH WORD
PUSHJ P,PUTWR1## ;STORE IN USER AREA
JRST RTM1## ;OUT OF BOUNDS
AOBJN P1,TPMCPY ;CONTINUE TILL DONE
PJRST CPOPJ1## ;THEN GIVE SKIP RETURN
;SPECIAL ROUTINE FOR ERROR INFO (1021/1022)
TAPIES: SKIPA P1,TUBIEP(U) ;GET INITIAL ERROR PNTR
TAPFES: MOVE P1,TUBFEP(U) ;GET FINAL ERROR PNTR
HLRZ T2,P4 ;GET USER LEN
MOVNI T2,-2(T2) ;NEGATE AND ADJUST FOR ARGS
JUMPGE T2,ECOD4## ;NOT ENOUGH ARGS
HLRE T3,P1 ; -LEN OF ERROR BLOCK
CAMLE T2,T3 ;CHECK VALIDITY
HRL P1,T2 ;YES - USE USERS ARG
PJRST TPMCPY ;GO COPY DATA
;ROUTINE TO HANDLE DATA SECURITY ERASE
TPMDSE: PUSHJ P,PIOSET ;SET ACS ETC.
IFN FTTLAB,<
MOVEI T1,40(P1) ;GENERATE SPECIAL CODE
PUSHJ P,LBLSLP ;WAIT FOR LBL PCS TO FINISH
PUSHJ P,LBLPOS ;CHECK FOR LBL PCS
PJRST CPOPJ1## ;ALL DONE - RETURN
> ;END IFN FTTLAB
JUMPE J,ECOD6## ;ERROR IF NO OWNER
MOVEI P2,RB.FSE ;FCN TO P2
MOVEI P3,TPMDE0 ;USE WRITE WITH LONG TIMEOUT
TRZ S,IOERRS
PUSHJ P,MTAP2 ;START OP
PUSHJ P,TPSKPW ;WAIT TILL DONE
TRNE S,IOERRS
PJRST ECOD0##
MOVEI P2,RB.FLG ;NOW DO 14 ERASE GAP OPS
MOVEI P3,TPMDE1
AOS (P) ;GIVE SKIP RETURN
PJRST MTAP2 ;START OP
;HERE TO PERFORM WRITE OP WITH LONG TIMEOUT
TPMDE0: XMOVEI T1,WRTDUN ;WHERE TO GO ON COMPLETION
MOVEM T1,IRBIVA(P1) ;SAVE IT
PJRST TPSTRT ;GO START THE OPERATION
;HERE ON KONTROLLER AVAILABLE
TPMDE1: MOVEI T1,^D14 ;SET COUNT
HRRM T1,@IRBACC(P1) ;INTO IORB
PJRST TPMWR1 ;START I/O
;ROUTINE TO WRITE LEOT (TM,TM,BSB)
TPMWET: PUSHJ P,PIOSET ;SET ACS ETC.
IFN FTTLAB,<
MOVEI T1,40(P1) ;SPECIAL CODE
PUSHJ P,LBLSLP ;WAIT FOR LBL PCS TO FINISH
PUSHJ P,LBLPOS ;CHECK LABELER
PJRST CPOPJ1## ;THROUGH - EXIT
> ;END IFN FTTLAB
JUMPE J,ECOD6## ;ERROR IF NO OWNER
PUSHJ P,SAVE3##
MOVE P3,S
ANDI P3,IOERRS
PUSHJ P,TPMCL1 ;JOIN CLOSE CODE
MOVE S,DEVIOS(F) ;SET UP S
TRNE S,IOIMPM ;WRITE LOCK?
PJRST ECOD16## ;YES, CAUSE ERROR RETURN
PJRST CPOPJ1## ;NO, ALL OK
IFN FTTLAB,<
;TAPE LABEL GET -- SET UP DDB IF NONE AND CONTINUE UNIT
TPMLBG: MOVE T1,DEVNAM(F) ;GET PHYS NAME
MOVEI T2,'''L' ;CONVERT TO SECONDARY NAME
DPB T2,[POINT 12,T1,11]
PUSH P,T1 ;SAVE IT
PUSH P,F ;SAVE DDB PNTR
PUSHJ P,DEVPHY## ;SEARCH FOR EXISTANCE
JRST TPLBGA ;NOT FOUND
POP P,P1 ;FOUND AIM P1 AT REAL DDB
POP P,(P) ;AND THROW AWAY THE NAME
LDB T1,PJOBN## ;GET OWNER JOB#
CAME T1,J ;DO WE OWN IT?
JUMPN T1,ECOD14## ;NO, ERROR IF ANOTHER
JRST TPLBG1 ;OURS OR NO OWNER
TPLBGA: MOVEI T2,TDVLEN ;SIZE OF DDB
PUSHJ P,GETWDS## ;ALLOCATE STORAGE
JRST [MOVEI T1,1 ;FAILED
IFN FTPSCD,<
AOS %MTASL## ;COUNT MTA GENERATED SLEEP
>;END IFN FTPSCD
PUSHJ P,TSLEE2 ;WAIT FOR SOME TO APPEAR
JRST TPLBGA] ;TRY AGAIN
POP P,P1 ;GET OLD DDB PNTR INTO P1
MOVE F,T1 ;SET UP NEW PNTR
HRLI T1,TDVDDB ;LOC OF PROTOTYPE
BLT T1,TDVLEN-1(F) ;MOVE INTO PLACE
POP P,DEVNAM(F) ;GIVE IT A NAME
MOVEI T1,ASSCON ;MAKE LABEL DDB ASSIGNED BY CONSOLE
IORM T1,DEVMOD(F)
MOVSI T1,DVLNG ;CLEAR LONG DISPATCH FLAG (WHY?)
ANDCAM T1,DEVMOD(F)
MOVSI T1,DEPRAS ;SET RESTRICTED ASSIGNMENT FLAG
IORM T1,DEVTYP(F)
MOVEI T1,DEPEVM ;NOW GET THIS CORRECT
TDNE T1,DEVTYP(P1) ;IF OLD DDB NEEDED EVM
IORM T1,DEVTYP(F) ; THEN THIS ONE DOES ALSO
MOVE T1,DEVCPU(P1) ;COPY OLD INTERLOCK WORD
MOVEM T1,DEVCPU(F) ;TO NEW DDB
HLRZ T1,DEVSER(P1) ;FIX UP LINKS OF
HRLM T1,DEVSER(F) ; DDB CHAIN TO
HRLM F,DEVSER(P1) ; INCLUDE THIS NEW ONE
TPLBG1: DPB J,PJOBN## ;ASSIGN TO THIS JOB
MOVE T1,TDVUDB(P1) ;UDB POINTER
MOVEM T1,TDVUDB(F) ;INTO NEW DDB
MOVE T1,TDVSTS(P1) ;GET PAR/DEN/MODE, USERS SET
MOVEM T1,TDVSTS(F) ; AND STORE IN LABEL DDB
MOVEM F,TUBDDL(U) ;LINK LABEL DDB TO UDB
PUSHJ P,TPWAIT ;WAIT OUR TURN FOR THIS TAPE
MOVE T1,DEVNAM(F) ;GET NAME OF NEW DDB
PUSHJ P,STOTAC## ;STORE FOR USER
AOS 0(P) ;SET FOR SKIP RETURN
PJRST TAPCNT## ;ALLOW UNIT TO BE SCHEDULED AGAIN
;;; STILL IN FTTLAB CONDITIONAL
;TAPE LABEL RELEASE -- TRY TO GET JOB RUNNING AGAIN
TPMLBR: SKIPE P1,TUBDDL(U) ;LABEL DDB ADDRESS
SETZM TUBDDL(U) ;CLEAR SECONDARY DDB
AOS 0(P) ;SET FOR SKIP RETURN
HLRZ T1,P4 ;USERS LENGTH
CAIL T1,3 ;CHECK FOR POSSIBLE 3RD ARG
PUSHJ P,GETWR1## ;FETCH IT
MOVEI T1,0 ;ASSUME ZERO
CAILE T1,IOMAX% ;RANGE CHECK
MOVEI T1,0 ;ASSUME IT SHOULD BE ZERO
DPB T1,PDVESE##
TLZN S,LBLWAT ;CHECK IF WAITING
JRST TPLBRU ;NO - UNWIND REQUESTS
MOVEM S,DEVIOS(F)
LDB T1,PJOBN## ;GET JOB NUMBER
JUMPE T1,TPLBRU ;IF NONE - EXIT
PUSH P,J ;SAVE RUNNING JOB #
PUSHJ P,SETACS ;LINK UP DDB,UDB
POP P,J ;GET BACK UUO JOB #
EXCH T1,J ;SAVE J - SET OTHER JOB #
LDB T2,PJBSTS## ;GET JOB STATUS
EXCH T1,J ;RESTORE J
CAIN T2,STOPQ## ;IS JOB STOPPED?
PJRST TAPHLD## ;YES - JUST SET NS
PJRST EWAKE## ;ELSE WAKE HIM UP
;HERE TO JUST QUIETLY DE-Q OLD INFO
TPLBRU: MOVSI T1,TUBQUE(U) ;SET Q TO NULL STATE
EXCH T1,TUBQUE(U) ;AND FETCH OLD INFO
TLZ T1,-1 ;CLEAR LH
PJRST TPMDQ ;SLUURRRRP!
;ROUTINE TO SWITCH TWO UNITS FOR TAPE LABELING
;CALL - F := CURRENT DDB
TPMLSU: MOVE T1,DEVNAM(F) ;GET CURRENT DEVICE'S NAME
PUSHJ P,DEVPHY## ;LOCATE IT WITH A VALID PREDECESSOR
JRST ECOD2## ;PUNT IF IT WENT AWAY
MOVE P2,T2 ;SAVE PREDECESSOR
TLZ F,-1-MXSECN ;MAKE COMPARISONS WORK
PUSH P,F ;SAVE TAPE LABELER'S DDB
MOVE T1,TDVUDB(F) ;POINT TO THE TUB
MOVE F,UDBDDB(T1) ;AND NOW THE REAL DDB
PUSHJ P,PSIRSW## ;SIGNAL THE REEL SWITCH
POP P,F ;AND ITS DDB
HLRZ T1,P4 ;GET USERS LENGTH
CAIL T1,3 ;MIN OF 3
PUSHJ P,GETWR1## ;GET NAME OF NEW DEVICE
PJRST ECOD4## ;BAD ARG ADDRS
MOVE P1,F ;SAVE OLD DDB ADDRS
PUSHJ P,DEVPHY## ;LOOK FOR NEW ONE
PJRST ECOD2## ;SEARCH LOST
MOVSI T1,DVMTA ;GRNTEE IT IS A MTA
TDNN T1,DEVMOD(F) ;...
PJRST ECOD2## ;SORRY 'BOUT THAT
MOVE P3,T2 ;SAVE PRED.
EXCH F,P1 ;GET OLD DDB ADDRESS FOR STATS
PUSHJ P,SNDVSS## ;SEND VOL SWITCH TAPE STATS FOR ACCOUNTING
JFCL ;WE TRIED
PUSHJ P,TPSTAT ;REPORT STATS
CAMN P1,F ;SAME DDB
JRST CPOPJ1## ;YES--GO AWAY
EXCH F,P1 ;NO--GET NEW DDB BACK
TAPOFF ;DEFEND AGAINST INTERRUPTS
SKIPA T1,DEVIOS(P1) ;GET OLD UNIT STATUS BITS
EXP <LBLNED+FSTOP+IOEND+IOSTBL+LBLEOF,,IOTEND+IOEND+IOERRS>
TDZ T1,.-1 ;CLEAR LOTS OF BITS...
MOVEM T1,DEVIOS(P1) ;SAVE THE NEW STATUS
DDBSRL ;DONT LET ANY OTHER CPU SCAN CHAIN
MOVE T1,DEVNAM(F) ;GET NEW NAME
EXCH T1,DEVNAM(P1) ;EXCHANGE WITH OLD ONE
MOVEM T1,DEVNAM(F) ;AND SAVE IN NEW DDB
SKIPE DEVLOG(P1) ;WAS THERE A LOGICAL NAME
JRST TPLSU1 ;YES - OK THEN
MOVEM T1,DEVLOG(P1) ;NO - USE OLD PHYSICAL NAME
TPLSU1: MOVE T1,DEVCPU(P1) ;SWAP DEVCPU
EXCH T1,DEVCPU(F) ; BETWEEN THE
MOVEM T1,DEVCPU(P1) ; TWO DDBS
HLRZ T1,DEVSER(P1) ;SUCCESSOR TO 1ST UNIT
HLRZ T2,DEVSER(F) ;SUCCESSOR TO 2ND UNIT
HRLM F,DEVSER(P2) ;MAKE PRED(1ST) POINT AT 2ND
HRLM P1,DEVSER(P3) ;MAKE PRED(2ND) POINT AT 1ST
CAIN T2,(P1) ;MAKE 1ST POINT AT SUCC(2ND)
MOVE T2,F ; IF 1ST = SUCC 2ND, POINT 1ST AT 2ND
HRLM T2,DEVSER(P1)
CAIN T1,(F) ;POINT 2ND AT SUCC (1ST)
MOVE T1,P1 ; OR AT 1ST
HRLM T1,DEVSER(F)
MOVE T1,GENPTR## ;AOBJN POINTER TO TABLE
TPLSU2: HRRZ T2,GENTAB##+1(T1) ;GET ADDR OF THIS GENERIC DDB
CAIN T2,(F) ;IS 1ST DDB GENERIC ?
HRRM P1,GENTAB##+1(T1) ;YES, UPDATE NEW DDB AS GENERIC
CAIN T2,(P1) ;IS 2ND DDB GENERIC ?
HRRM F,GENTAB##+1(T1) ;YES, ITS THE OLD ONE NOW
AOBJN T1,.+1 ;ACCOUNT FOR TWO WORD ENTRIES
AOBJN T1,TPLSU2 ;SEARCH THE TABLE
DDBSRU ;GIVE UP INTERLOCK
MOVE T2,TDVUDB(P1) ;UDB ADDRESS
EXCH T2,TDVUDB(F) ;SWAP
MOVEM T2,TDVUDB(P1) ;UPDATE
MOVEM F,UDBDDB(U) ;FIX UDB / DDB PNTR
MOVE P2,U ;OLD UDB PNTR
MOVE U,TDVUDB(P1) ;NEW UDB ADDRESS
MOVE T2,TUBLBL(U) ;EXCHANGE LABEL INFO IN UDBS
EXCH T2,TUBLBL(P2)
MOVEM T2,TUBLBL(U) ;...
MOVEM P1,UDBDDB(U) ;AND SET PNTR
MOVE F,P1 ;MAKE F POINT AT NEW DDB
SKIPE T1,TUBDDL(U) ;GET NEW UNIT'S OLD LABEL DDB
MOVEM P2,TDVUDB(T1) ;CHANGE ITS UNIT POINTER IF IT EXISTS
EXCH T1,TUBDDL(P2) ;UPDATE PREVIOUS, GET OLD
SKIPE T1 ;IF NEW LABEL DDB,
MOVEM U,TDVUDB(T1) ;UPDATE ITS UNIT POINTER
MOVEM T1,TUBDDL(U) ;AND THE UNIT POINTER TO THE DUMB DDB
TAPON ;ALLOW INTERRUPTS AGAIN
JRST CPOPJ1## ;SKIP EXIT
;ROUTINE TO SEND FORCE EOV MESSAGE TO LBL PCS
TPMFEV: MOVE S,DEVIOS(F) ;SET UP S
PUSHJ P,LBLCKM ;CHECK FOR LBL PROCESS
SKIPA T1,[LR.EOV] ;REQUEST CODE
PJRST ECOD7## ;NO LABEL PROCESS
PUSHJ P,LBLSLP ;WAIT FOR LBL PCS TO FINISH
DPB T1,TUYRQT ;REQUEST TYPE
MOVEI T1,0 ;ZERO ADDITIONAL INFO
DPB T1,TUYINF ;...
TPMSND: PUSHJ P,LBLMSG ;SEND MESSAGE AND BLOCK
LDB T1,PDVESE##
JUMPE T1,CPOPJ1## ;SKIP RETURN IF NO ERROR
PJRST ECOD10## ;ELSE ERROR
;ROUTINE TO SEND USER REQUEST FOR LABEL PROCESSING
TPMURQ: MOVE S,DEVIOS(F) ;SET UP S
PUSHJ P,LBLCKM ;SEE IF LBL PCS
SKIPA T1,[LR.URQ] ;YES - REQUEST TYPE
PJRST ECOD7## ;ERROR
PUSHJ P,LBLSLP ;WAIT FOR LBL PCS TO FINISH
DPB T1,TUYRQT ;REQUEST TYPE
HLRZ T1,P4 ;GET USER LENGTH ARG
CAIL T1,3 ;CHECK FOR ENUF ARGS
PUSHJ P,GETWR1## ;FETCH NEXT
PJRST ECOD4## ;TOO FEW ARGS
CAILE T1,77 ;CHECK RANGE
JRST ECOD3## ;OUT OF BOUNDS
DPB T1,TUYINF ;STASH IN UDB
PJRST TPMSND ;SEND MESSAGE
;ROUTINE TO DESTROY LABEL DDB AND GIVE BACK ITS STORAGE
TPMLDD: SKIPE TUBDDL(U) ;LABEL DDB ADDRESS
JRST ECOD12## ;ERROR IF THERE IS ONE
MOVE T1,DEVNAM(F) ;GET PHYS NAME
MOVEI T2,'''L' ;CONVERT TO SECONDARY NAME
DPB T2,[POINT 12,T1,11]
PUSHJ P,DEVPHY## ;GO FIND IT
JRST CPOPJ1## ;NOT THERE, JUST RETURN
LDB T1,PJOBN## ;GET THIS DDB'S OWNER
CAME T1,J ;IS IT THE GUY DOING RELEASE
JUMPN T1,ECOD6## ;NO, ERROR IF ANOTHER
PUSHJ P,WAIT1## ;WAIT FOR I/O TO STOP
AOS 0(P) ;SET FOR SKIP RETURN
MOVE T1,DEVSER(F) ;GET LINK FROM DB TO BE DESTROYED
HLLM T1,DEVSER(T2) ;SAVE IN PREDESSOR
;PREVENT THE POSSIBILITY THAT SOMEONE HAS AN F POINTING AT THE
;DDB THAT WILL GO AWAY IN A LITTLE WHILE. IF THEY GET HELD UP
;AND THEN TRY TO DEVSER THEMSELVES TO THEIR NEXT DDB, THEY MAY
;TRY TO USE CORE THAT HAS BEEN RE-USED BY SOMEONE.
DDBSRL ;STOP DDB SCANNING
MOVE T1,DEVSER(F) ;GET LINK FROM DB TO BE DESTROYED
HLLM T1,DEVSER(T2) ;SAVE IN PREDESSOR
DDBSRU ;RESUME DDB SCANNING
PUSHJ P,SAVE1## ;SAVE P1
MOVEI P1,0 ;START AT CHANNEL 0
TPMLD2: PUSHJ P,NXTCH## ;NEXT CHANNEL
JRST TPMLD3 ;DONE
CAIE T1,(F) ;IS IT INITED ON THIS CHANNEL
JRST TPMLD2 ;NO
SOS P1 ;UNDO NXTCH ADVANCE
PUSHJ P,JDAADP## ;NO, CLEAR OUT THIS CHANNEL
SETZM (T1)
TPMLD3: SKIPE DEVPSI##(F) ;ON THE PSI SYSTEM?
PUSHJ P,PSIRMV## ;YES, REMOVE IT
MOVEI T1,TDVLEN ;SIZE OF DDB
HRRZ T2,F ;ADDR
PJRST GIVWDS## ;GIVE BACK STORAGE AND RETURN
;READ/SET LABEL PARAMETERS
TAPRLP: HRR M,P4 ;POINT AT USER'S FUNCTION
TLZ F,-1-MXSECN ;CLEAR JUNK FROM UUOCON
PUSHJ P,LBLCKM ;CHECK FOR LBL PCS
JRST TAPRL0 ;THERE IS ONE, GO AHEAD
PUSHJ P,GETWRD## ;GET USER'S FUNCTION
PJRST ECOD4## ;ADDR ERROR
CAME F,TUBDDL(U) ;LABEL DDB ADDRESS?
PJRST ECOD7## ;NO, NO LBL PCS
TRNE T1,2000 ;SET FUNCTION
JRST TAPSLP ;YES, DO IT
JRST TAPRL1 ;DO READ
TAPRL0: PUSHJ P,GETWRD## ;GET USER'S FUNCTION
PJRST ECOD4## ;ADDR ERROR
PUSHJ P,LBLSLP
TRNE T1,2000 ;SET FUNCTION?
JRST TAPSLP ;YES
TLNN S,FINP ;FIRST INPUT DONE?
JRST TAPRL1 ;YES, PROCEED
MOVEI T1,LR.FIN ;REQUEST FOR FIRST INPUT
DPB T1,TUYRQT ;SAVE IN TUB
MOVEI T1,77 ;GET LABEL READ FCN
DPB T1,TUYINF ;SET IT
PUSHJ P,LBLMSG ;SEND MESSAGE
LDB T1,PDVESE## ;CHECK ERROR BITS
JUMPN T1,ECOD10## ;GIVE ERROR TO USER
TAPRL1: ADDI M,1 ;POINT AT WHERE TO START STORING
HLRZ T2,P4 ;GET LENGTH
SUBI T2,2 ;CORRECT FOR ARG'S
JUMPLE T2,ECOD4## ;NOT ENOUGH ARG'S
CAILE T2,TLPMAX ;BIGGER THAN MAX?
MOVEI T2,TLPMAX ;YES, USE MAX
MOVN P1,T2 ;NEGATE LENGTH
HRLZS P1 ;MOVE TO LH
HRRI P1,TUBRFM ;UDB OFFSET TO START OF LABEL PARAMETER AREA
JRST TPMCPY ;USE EXISTING ROUTINE TO RETURN BLOCK
TAPSLP: HLRZ T2,P4 ;GET LENGTH OF USER'S ARG BLOCK
SUBI T2,2 ;ACCOUNT FOR FIRST 2 ARG'S
JUMPLE T2,ECOD4## ;NOT ENOUGH ARGS
CAILE T2,TLPMAX ;BIGGER THAN MAX
MOVEI T2,TLPMAX ;YES, USE MAX
MOVN P1,T2 ;GET NEGATIVE LENGTH
HRLZS P1 ; INTO LH FOR AOBJN
HRRI P1,TUBRFM(U) ;POINT AT START OF AREA
ADDI M,1 ;POINT M AT DEVICE ARG WORD
TAPSL1: PUSHJ P,GETWR1## ;GET NEXT ARGUMENT
PJRST ECOD4## ;NOT THERE, ERROR
MOVEM T1,0(P1) ;STORE IN TUB
AOBJN P1,TAPSL1 ;GET ALL ARGUMENTS
MOVEI T1,TLPMAX
SUB T1,T2
JUMPLE T1,CPOPJ1##
ADDI P1,1
SETZM (P1)
SOJG T1,.-2
JRST CPOPJ1## ;SKIP RETURN
> ;END IFN FTTLAB
IFN FTTLAB,<
;ROUTINE TO SET DENSITY IN THE OTHER DDB.
; (EITHER THE LABEL DDB, OR THE REAL DDB)
;CALL-T1 HAS DESIRED DENSITY CODE
; -F POINTS AT REGULAR (OR LABEL) DDB
;RETURNS- T2,T3 CLOBBERED, DENSITY SET IN
; LABEL (OR REGULAR) DDB
SETODN: MOVE T3,TDVUDB(F) ;GET DOWN TO UDB
SKIPN T2,TUBDDL(T3) ;GET LABEL DDB ADDRESS
POPJ P, ;NO OTHER, DON'T BOTHER
PUSH P,F ;SAVE F
TLZ F,-1-MXSECN ;CLEAR POSSIBLE JUNK FROM UUOCON
CAMN T2,F ;SET DENSITY ON LABEL DDB
MOVE T2,UDBDDB(T3) ; GET ADDRESS OF REGULAR DDB
SKIPN T2 ;BETTER BE ONE!
STOPCD FPOPJ##,DEBUG,RDN ;++ REGULAR DDB NOT FOUND
EXCH T2,F ;AIM AT OTHER
TLNN T1,(ST.FAC) ;REQUEST A DENSITY CHANGE?
DPB T1,TDYDN1 ;SET DENSITY
TLNE T1,(ST.FAC) ;ACTUAL DENSITY?
DPB T1,TDYDEN ;YES, SET ACTUAL DENSITY
EXCH T2,F ;BACK TO NORMAL
JRST FPOPJ## ;RESTORE F AND RETURN
>;END IFN FTTLAB
;ROUTINE TO TAKE CTL OFF-LINE AND SET MAINT MODE FOR ALL KONTROLLERS
;ON SAME SAME CHANNEL. SOME DIAGS THINK SINCE THEY OWN ONE KONTROLLER
;ON THE CHANNEL THAT THEY CAN DO WHAT THEY WANT WITH THE CHANNEL. THIS
;CAN CAUSE PROBLEMS IF THERE ARE OTHER KONTROLLERS ON THE SAME CHANNEL.
TPMSMM: MOVE W,UDBKDB(U) ;GET KDB ADDRS
HRRZ T3,TKBJOB(W) ;GET KDB "OWNER" IF ANY
MOVSI T2,TKSMNT## ;GET MAINT BIT
TDNN T2,TKBSTS(W) ;IN MAINTENANCE MODE ALREADY
JRST TPMSM0 ;NO
CAIE T3,(J) ;YES, IS IT SAME PERSON?
PJRST ECOD11## ;NO, GIVE ERROR RETURN
MOVE T1,KDBICP(W) ;YES, GET ADDRS OF CHANNEL PROGRAM
PJRST STOTC1## ;RETURN ADDRS TO CALLER
;LOOP THRU ALL KDBS ON SAME CHANNEL AND SEE IF ALL UDB/DDBS ARE
;"ASSIGNABLE".
TPMSM0: PUSH P,KDBICP(W) ;SAVE ADDRS OF CHANNEL PROGRAM FOR USER
MOVE T4,KDBDVC(W) ;GET DEVICE CODE
DDBSRL ;GET THE DDB INTERLOCK
SKIPA W,KDBTAB##+.TYMTA ;GET FIRST KDB ADDRS
TPMSM1: MOVE W,KDBNXT(W) ;GET NEXT KDB ADDRS
JUMPE W,TPMSM4 ;IF NONE, GO SET UP DDBS
CAME T4,KDBDVC(W) ;ON SAME CHANNEL?
JRST TPMSM1 ;NO, TRY NEXT KDB
MOVE T3,KDBIUN(W) ;YES, GET POINTER TO UDB TABLE
TPMSM2: SKIPN T2,0(T3) ;SEE IF UNIT EXISTS
JRST TPMSM3 ;NO - TRY NEXT
MOVE F,UDBDDB(T2) ;GET DDB PNTR
LDB T1,PJOBN## ;OWNING JOB NUMBER
CAME T1,J ;IT HAD BETTER BE ME
JUMPN T1,[DDBSRU ; OR JOB 0
POP P,(P) ;PHASE STACK
JRST ECOD11##] ;RETURN ERROR
TPMSM3: CAMGE T3,KDBFUN(W) ;LAST UDB?
AOJA T3,TPMSM2 ;NO, LOOP FOR MORE
JRST TPMSM1 ;YES, GO TO NEXT KDB
;WE CAN GET ALL UDB/DDBS NEEDED, SET THEM UP
TPMSM4: SKIPA W,KDBTAB##+.TYMTA ;GET FIRST KDB ADDRS
TPMSM5: MOVE W,KDBNXT(W) ;GET NEXT KDB ADDRS
JUMPE W,TPMSM8 ;IF NONE, GO FINISH UP
CAME T4,KDBDVC(W) ;ON SAME CHANNEL?
JRST TPMSM5 ;NO, TRY NEXT KDB
MOVE T3,KDBIUN(W) ;POINTER TO UDB TABLE
TPMSM6: SKIPN T2,0(T3) ;GET TUB
JRST TPMSM7 ;NONE THERE
MOVE F,UDBDDB(T2) ;GET DDB PNTR
MOVEI T1,ASSCON ;ASSIGNED BY COMMAND BIT
IORM T1,DEVMOD(F) ;NAIL DOWN THE DDB
DPB J,PJOBN## ;INCLUDE OWNING JOB NUMBER
TPMSM7: CAMGE T3,KDBFUN(W) ;LAST UDB?
AOJA T3,TPMSM6 ;LOOP FOR MORE
CONO PI,PI.OFF ;TURN OFF WORLD
IFN FTKL10,<HLLZS @KDBCSO(W)> ;REMOVE FROM CONSO CHAIN
MOVSI T1,TKSMNT## ;SET MAINT MODE BIT
IORM T1,TKBSTS(W) ;IN KDB
CONO PI,PI.ON ;RESTORE WORLD
HRRM J,TKBJOB(W) ;SAVE HIS JOB NUMBER
JRST TPMSM5 ;LOOP FOR NEXT KDB
TPMSM8: DDBSRU ;RELEASE DDB INTERLOCK
;PUT ANY KONTROLLERS ACCESSING SAME UNIT(S) IN MAINTENANCE MODE TOO
XMOVEI T3,UDBKDB(U) ;GET POINTER TO KDB ADDRESSES
MOVEI T2,MXPORT ;GET MAXIMUM NUMBER OF KDBS
MOVSI T4,TKSMNT## ;GET BIT TO SET
TPMSM9: SKIPN T1,(T3) ;GET KDB ADDRESS
JRST TPMS10 ;NO MORE
IORM T4,TKBSTS(T1) ;SET MAINT BIT
HRRM J,TKBJOB(T1) ;SET JOB NUMBER (OWNER) TOO
AOS T3 ;BUMP POINTER
SOJG T2,TPMSM9 ;TRY NEXT
TPMS10: POP P,T1 ;INFO USER WOULD LIKE (KDBICP)
PJRST STOTC1## ;AND SKIP RETURN
;ROUTINE TO RESTORE CTL AND CLEAR MAINT MODE (FOR ALL CTLS ON SAME CHANNEL)
TPMCMM: MOVE W,UDBKDB(U) ;GET KDB PNTR
HRRZ T4,TKBJOB(W) ;DOES THIS JOB HAVE KONTROLLER?
CAIE T4,(J) ;?
JRST ECOD11## ;NO - LOSE
PUSH P,KDBDVC(W) ;SAVE DEVICE CODE
SKIPA W,KDBTAB##+.TYMTA ;GET FIRST KDB ADDRS
TPMCM0: MOVE W,KDBNXT(W) ;GET NEXT KDB ADDRS
JUMPE W,TPMCM1 ;GO CHECK POSSIBLE OTHER KDBS
MOVE T4,KDBDVC(W) ;GET DEVICE CODE
CAMN T4,(P) ;SAME CHANNEL?
PUSHJ P,TPMCMX ;YES, FREE UP KDB AND DDBS
JRST TPMCM0 ;LOOP FOR NEXT KDB
TPMCM1: XMOVEI T3,UDBKDB(U) ;GET ADDRESS OF KDBS
MOVEI T2,MXPORT ;GET MAXIMUM NUMBER OF KDBS TO UNIT
MOVSI T4,TKSMNT## ;GET BIT TO CLEAR
TPMCM9: SKIPN T1,(T3) ;GET KDB ADDRESS
JRST TPOPJ1## ;NO MORE RETURN
ANDCAM T4,TKBSTS(T1) ;CLEAR MAINT BIT
HLLZS TKBJOB(T1) ;CLEAR OWNER
AOS T3 ;BUMP POINTER
SOJG T2,TPMCM9 ;TRY NEXT KDB
JRST TPOPJ1## ;DONE
;FREE UP KDB AND ASSOCIATED DDBS. CALLED FROM TPMCMM AND TPFREE.
TPMCMX: HLLZS TKBJOB(W) ;CLEAR KDB OWNER
MOVE T4,KDBDSP(W) ;ADDRS OF CTL DEP CODE
MOVE T1,KDBCAM(W) ;ON CORRECT CPU?
TDNE T1,.CPBIT##
PUSHJ P,@TPKRES(T4) ;YES, RESET CONTROLLER
MOVSI T1,TKSMNT## ;BIT TO CLEAR NOW
ANDCAM T1,TKBSTS(W) ; IN KDB
MOVE T3,KDBIUN(W) ;POINTER TO UDB TABLE
DDBSRL ;INTERLOCK DDB SCANNING
TPMCM2: SKIPN T2,0(T3) ;GET TUB
JRST TPMCM3 ;NONE THERE
MOVE F,UDBDDB(T2) ;GET DDB PNTR
MOVEI T1,ASSCON ;BIT TO CLEAR
ANDCAB T1,DEVMOD(F) ;CLEAR ASSIGNED BY COMMAND
TRNE T1,ASSPRG ;IS DEVICE INITED?
JRST TPMCM3 ;NO
SETZB T1,DEVLOG(F) ;CLEAR ANY LOGICAL NAME ASSIGNMENT
DPB T1,PJOBN## ;AND OWNING JOB
TPMCM3: CAMGE T3,KDBFUN(W) ;LAST UDB?
AOJA T3,TPMCM2 ;LOOP FOR MORE
DDBSRU ;RELEASE INTERLOCK
MOVE T2,KDBDSP(W) ;GET DISPATCH TABLE
MOVE T1,KDBCAM(W) ;ON CORRECT CPU?
TDNE T1,.CPBIT##
PUSHJ P,@TPKLOD(T2) ;LOAD MICROCODE IF AVAILABLE
JFCL ;PROBABLY NOT THAT KIND OF CTL
POPJ P, ;RETURN
;ROUTINE CALLED ON TAPE ON-LINE
TPMONL::
IFN FTMDA,<
PUSH P,W ;IPCSER WIPES W
MOVE T1,UDBDDB(U)
MOVE T1,DEVNAM(T1) ;SIXBIT NAME
MOVEI T2,.TYMTA ;A MAGTAPE
PUSHJ P,SNDMDC## ;TELL MDC
JFCL
POP P,W ;RESTORE W
>; END IFN FTMDA
PUSH P,F ;SAVE F
MOVE F,UDBDDB(U) ;GET DDB
PUSHJ P,PSIONL## ;TELL PSISER
POP P,F ;RESTORE F
POPJ P, ;AND RETURN
; TAPOP. UUO FUNCTION .TFCEC
;
; CLEAR ERROR COUNTERS. THIS FUNCTION IS USED MAINLY BY THE TAPE LABLER.
; IN ORDER TO DETERMINE TAPE LABEL TYPE, PULSAR WILL READ A TAPE
; USING VARYING DENSITIES UNTIL A KNOWN LABEL TYPE IS FOUND. ALL
; FAILURES RESULT IN 'HARD ERRORS'. THESE ERRORS ARE REPORTED BY
; DAEMON AND GET TYPED OUT ON THE CTY AND THE USER'S TTY AS A RESULT
; OF THE SET WATCH MTA COMMAND. SINCE THESE AREN'T REALLY ERRORS,
; PULSAR MUST USE TAPOP. UUO FUNCTION .TFCEC TO AVOID MISLEADING AND
; AGGRIVATING USERS, AND DRIVING FIELD SERVICE PEOPLE UP A WALL W;
;
TPMCEC: SETZM TUBHRE(U) ;CLEAR HARD READ ERRORS
SETZM TUBSRE(U) ;CLEAR SOFT READ ERRORS
SETZM TUBHWE(U) ;CLEAR HARD WRITE ERRORS
SETZM TUBSWE(U) ;CLEAR SOFT WRITE ERRORS
JRST CPOPJ1## ;RETURN
SUBTTL MTAPE UUO
;MTAPE UUO
MTAPE0::PUSHJ P,SAVE3## ;SAVE P1,P3
PUSHJ P,WAIT## ;WAIT FOR ALL PREVIOUS IO TO COMPLETE
PUSHJ P,PIOSET ;SET UP ACS
HRRZ T1,M ;GET RH OF UUO
CAIE T1,MT.DEC ;CHECK SPECIAL JUNK
CAIN T1,MT.IND ; FOR 9-TK TAPES
JRST TPM9TK ;SET/CLR 4/4.5 BYTE MODE
CAIN T1,MT.STL ;SPECIAL LOW THRESHOLD
JRST TPMLOW ; TM10 ONLY
MTAP0:
IFN FTTLAB,<
CAIG T1,MT.MAX ;CHECK VALID ARG
SKIPN P3,MTDTBL(T1) ;GET TABLE ENTRY
JRST UUOERR## ;ERROR IF NOT IMPLEMENTED
PUSHJ P,LBLCKM ;PROCESSOR RUNNING ?
SKIPA
JRST MTAP1
PUSHJ P,LBLSLP ;WAIT FOR LABEL PCS
JUMPE T1,MTAP1 ;DON'T CALL LBL PLS ON NOOP
PUSHJ P,LBLPOS ;CHECK LBLPCS
POPJ P, ;HE DID IT FOR YOU
JRST MTAP1 ;PROCEED
> ;END IFN FTTLAB
MTAP: CAIG T1,MT.MAX ;CHECK VALID ARG
SKIPN P3,MTDTBL(T1) ;GET TABLE ENTRY
JRST UUOERR## ;ERROR IF NOT IMPLEMENTED
MTAP1: HLRZ P2,P3 ;FCN INTO P2
MTAP2: PUSHJ P,GENIOR ;GENERATE IORB
JRST TPMINF ;WHAT ELSE???
MOVEM T1,TDVIOR(F) ;WAIT TILL READY
IFE FTXMON,<HRRZS P3> ;STRIP OFF LH JUNK
IFN FTXMON,<
SKIPE P3 ;HAVE A ROUTINE ADDRESS?
XHLLI P3,. ;INCLUDE SECTION NUMBER
> ;END IFN FTXMON
MOVEM P3,IRBIVA(T1) ;SAVE INT VECTOR
PUSHJ P,CPURQT## ;QUEUE IT UP
MOVSI T1,TKSOFL## ;IF KONTROLLER IS OFF-LINE,
TDNE T1,TKBSTS(W)
JRST POSOFL ;COMPLAIN TO USER AND OPER
PUSHJ P,KONWAT ;WAIT FOR KONTROLLER (P1 := IORB UPON RETURN)
MOVSI T1,TKSOFL## ;SEE IF UNIT IS OFFLINE
TDNE T1,TUBSTS(U) ;??
JRST POSOFL ;YES - INFORM WORLD
SKIPE T1,IRBIVA(P1) ;GET ROUTINE ADDRESS
IFE FTXMON,<JRST (T1)> ;DO SPECIAL ROUTINE
IFN FTXMON,<XJRST T1> ;DO SPECIAL ROUTINE
MTAPG1: MOVEI T1,1 ;ONE OP ONLY
MTAPGO: HRRM T1,@IRBACC(P1) ;...
XMOVEI T1,TPMISP ;WHERE TO GO WHEN DONE
MTAPG2: MOVEM T1,IRBIVA(P1) ;SAVE IT
PJRST TPSTRT ;GO STRT OP
;ENTER HERE TO HANDLE OFFLINE DEVICE IF MTAPE UUO
;C(T1) := TKSOFL
POSOFL: ANDCAM T1,TUBSTS(U) ;CLEAR FLAG
PUSHJ P,TPMFLX ;FLUSH CURRENT REQUEST
POSOF1: TLZ S,IOSTBL!OFFLIN ;CLEAR THESE ALSO
PUSHJ P,CKTC10 ;CHECK ON TC10C
PUSHJ P,HNGSTP## ;INFORM ALL
MOVSI P2,OFLUNH ;PRESERVE THIS BIT
AND P2,DEVIOS(F) ;AROUND CALL TO IOSET
PUSHJ P,PIOSET ;RESET ACS
IORM P2,DEVIOS(F) ;RESTORE BIT IF ON
HRRZ T1,M ;GET FCN BACK IN T1
JRST MTAP ;CONTINUE
;DISPATCH TABLE FOR MTAPE UUO FUNCTIONS
MTDTBL: RB.FYB,,TPMNOP ;0-WAIT
RB.FRW,,TPMREW ;1-REWIND
0 ;2-ILLEGAL
RB.FTM,,TPMWRT ;3-WRITE TAPE MARK
0 ;4-ILLEGAL
0 ;5-ILLEGAL
RB.FSR,,0 ;6-FORWARD SKIP RECORD
RB.FBR,,0 ;7-BACKWARD SKIP RECORD
RB.FBR,,TPMSET ;10-SKIP TO LEOT (BACKUP FIRST)
RB.FRU,,TPMUNL ;11-REWIND AND UNLOAD
0 ;12-ILLEGAL
RB.FLG,,TPMWRT ;13-WRITE 3" BLANK TAPE
0 ;14-ILLEGAL
0 ;15-ILLEGAL
RB.FSF,,TPMFSF ;16-FORWARD SKIP FILE
RB.FBF,,TPMBSF ;17-BACKWARD SKIP FILE
;HERE TO DO AN INTERNAL MTWAT.
TPWAIT: MOVEI P2,RB.FYB ;YELLOW BALL FUNCTION
PUSHJ P,GENIOR ;SO WE KNOW WHEN IT'S OUR TURN
JRST [PUSHJ P,TSLEE1 ;WAIT FOR CORE TO APPEAR
JRST .-2] ;TRY AGAIN FOR THE IORB
MOVEM T1,TDVIOR(F)
XMOVEI T2,TPMNOP ;A PHONY IVA
MOVEM T2,IRBIVA(T1) ;DEFEND AGAINST KONWT2
PUSHJ P,CPURQT## ;PLACE AT END OF QUEUE
PUSHJ P,KONWAT ;WAIT FOR CONTROLLER
; PJRST TPMNOP ;UPDATE STATUS AND FLUSH THIS REQUEST
;HERE ON MTAPE 0
TPMNOP: MOVE S,DEVIOS(F)
MOVSI T1,TUSBOT## ;IS DRIVE AT BOT?
TDNE T1,TUBSTS(U)
TRO S,IOBOT ;YES
MOVEM S,DEVIOS(F) ;LIGHT BIT IF AT BOT
JRST TPMFLX ;THROW AWAY IORB AND RETURN
;HERE TO PERFORM SOME SORT OF WRITE FUNCTION
TPMWRT: MOVEI T1,1 ;DO ONLY ONE OP
HRRM T1,@IRBACC(P1) ;STORE FOR DRIVER
TPMWR1: MOVEI T1,WRTDUN ;WHERE TO GO
JRST MTAPG2 ;START OP
;HERE WHEN DONE (CHECK ERRORS)
WRTDUN: PUSHJ P,SETIOS ;SET UP S
JSP P2,OUTERR ;ATTEMPT RECOVERY
PJRST TPMSTP ;STOP I/O AND RETURN
;INTERUPT AT END OF SPACING OP
TPMISP: PUSHJ P,SETIOS ;SET UP S
JSP P2,SPERR ;HANDLE SPACING ERROR
PUSHJ P,TPMRIO ;RETURN IORB
HLLZS TKBSTS(W) ;CLEAR KON STATUS
TPMISX:
IFN FTTLAB,<TLZ S,LBLNED> ;NO ADDITIONAL LABELER WORK NEEDED
PJRST STOIOS## ;WIND IT DOWN
;ROUTINE TO SET/CLR 4/5 BYTE 9 TRACK MODE
TPM9TK: MOVEI T1,TUC7TK## ;7-TRACK BIT
TDNE T1,TUBCNF(U) ;SEE IF ITS OK
POPJ P, ;FORGET IT IF 7TK
HRRZ T1,M ;RESTORE T1
MOVEI T2,RB.MCD ;SET NORMAL MODE
CAIE T1,MT.DEC ;DEC MODE?
MOVEI T2,RB.MBY ;INDUSTRY COMPATIBLE
DPB T2,TDYMOD ;SET IN MODE FIELD OF DDB
POPJ P, ;RETURN
;SET LOW THRESHOLD FOR TM10 CONTROLLERS
TPMLOW: MOVSI T2,D.NRLT ;NEXT REC AT LOW THRESHOLD
IORM T2,TDVSTS(F) ;SET IN DDB
POPJ P, ;RETURN
;HERE TO HANDLE UNLOAD. SETUP COUNTERS, REPORT TO DAEMON
;AND BITCH AT USER AND OPERATOR. (PS - CHECK SET WATCH MTA)
TPMUNL:
IFN FTMP,<
SETZM DEVNBF(F)
SETZM DEVSBF(F)
> ;END IFN FTMP
AOSA P2,TUBTUN(U) ;TOTAL UNLOADS, REMEMBER THIS IS UNLOAD
TPMREW: SETZ P2, ;CLEAR UNLOAD FLAG
MOVSI T1,TUSREW## ;SET REWINDING NOW!
IORM T1,TUBSTS(U) ;...
SETZM TUBCNI(U) ;FORGET ANY ERROR, DO THE REW/UNL
PUSHJ P,MTAPG1 ;START OPERATION
PUSHJ P,TPMRLW ;WAIT TILL DISCONNECTED
JUMPE P2,TPMRW1 ;NO MSG IF REWIND
MOVSI T1,DVDIR ;GET DIRECTORY DEVICE BIT
ANDCAM T1,DEVMOD(F) ;CLEAR IT
PUSHJ P,TPSTAT ;PRINT STATS
PJRST STOIOS## ;STORE S AND RETURN
TPMRW1: TRO S,IOBOT ;SET BOT
MOVSI T1,TKSOFL##
TDNN T1,TUBSTS(U) ;CHECK OFF-LINE
PJRST STOIOS## ;STORE S AND RETURN
ANDCAM T1,TUBSTS(U) ;CLEAR OFL BIT
JRST POSOF1 ;INFORM USER
;ROUTINE TO PRINT TAPE STATISTICS AND CALL DAEMON
TPSTAT::PUSHJ P,SAVE2## ;SAVE P1,P2
PUSH P,W ;SAVE US FROM SCNSER
PUSH P,F ;SAVE F
PUSH P,U ;SAVE U
MOVE P1,F ;HIDE DDB IN P1
MOVE P2,U ;HIDE UDB IN P2
MOVE P2,TDVUDB(F) ;GET UDB ADDRESS
MOVE P1,UDBDDB(P2) ;GET DDB ADDRESS
LDB J,PJOBN## ;GET OWNER JOB NUMBER
IFN FTTLAB,<
CAME J,TLPJOB## ;TAPE LABELER?
JRST TPSTA6 ;NO
MOVE F,P1 ;USE PRIMARY DDB
LDB J,PJOBN## ;GET USER JOB NUMBER
TPSTA6:
> ;END IFN FTTLAB
MOVE T1,TUBCRD(P2) ;CHARACTERS READ
IOR T1,TUBCWR(P2) ;CHARACTERS WRITTEN
IOR T1,TUBHRE(P2) ;HARD READ ERRORS
IOR T1,TUBHWE(P2) ;HARD WRITE ERRORS
JUMPE T1,TPSTA5 ;ANYTHING TO REPORT?
MOVSI T1,JW.WMT ;CHECK IF HE WANTS TO SEE IT
TDNN T1,JBTWCH##(J) ;?
JRST TPSTA3 ;JUST TELL OPR & DAEMON
PUSHJ P,TTYFND## ;SET UP F AND U
TPSTA0: PUSHJ P,CRLF## ;PRINT CRLF
PUSHJ P,PRLBK## ;LEFT BRACKET
MOVE T2,DEVNAM(P1) ;GET DEVICE NAME
PUSHJ P,PRNAME## ;RPINT IT
PUSHJ P,INLMES## ;PRINT A COLON
ASCIZ ":"
SKIPE T2,TUBRID(P2) ;SEE IF REEL ID
PUSHJ P,PRNAME## ;YES - PRINT IT
SKIPN TUBCRD(P2) ;READ STATS?
SKIPE TUBHRE(P2) ;HARD READ ERRORS?
CAIA
JRST TPSTA1 ;NO READ STATS-JUMP AROUND
PUSHJ P,INLMES##
ASCIZ " Read(C/H/S) = "
MOVE T1,TUBCRD(P2) ;CHARS READ
PUSHJ P,PRTDIG##
PUSHJ P,PRSLSH## ;SLASH
MOVE T1,TUBHRE(P2) ;HARD READ ERRORS
PUSHJ P,PRTDIG##
PUSHJ P,PRSLSH## ;SLASH
MOVE T1,TUBSRE(P2) ;SOFT READ ERRORS
PUSHJ P,PRTDIG##
;;; FALLIN TPSTA1
TPSTA1: SKIPN TUBCWR(P2) ;ANYTHING WRITTEN?
SKIPE TUBHWE(P2) ;OR HARD WRITE ERRORS?
CAIA ;YES, PRINT STATS
JRST TPSTA2 ;NO
PUSHJ P,INLMES##
ASCIZ " Write(C/H/S) = "
MOVE T1,TUBCWR(P2) ;CHARS WRITTEN
PUSHJ P,PRTDIG##
PUSHJ P,PRSLSH## ;SLASH
MOVE T1,TUBHWE(P2) ;HARD WRITE ERRORS
PUSHJ P,PRTDIG##
PUSHJ P,PRSLSH## ;SLASH
MOVE T1,TUBSWE(P2) ;SOFT WRITE ERRORS
PUSHJ P,PRTDIG##
TPSTA2: PUSHJ P,PRRBKC## ;RIGHT BRACKET
CAMN U,OPRLDB## ;THIS DA OPR?
JRST TPSTA4 ;YES - DONE
TPSTA3: MOVE U,OPRLDB## ;NO - GET OPR LINE
JRST TPSTA0 ;DO OVER
TPSTA4: MOVE U,P2 ;RESTORE UDB PNTR
MOVE F,P1 ; AND DDB PNTR
PUSHJ P,TPESTS ;CREATE AN ERROR LOG ENTRY
TPSTA5: POP P,U
POP P,F
POP P,W ;RESTORE KDB
MOVE S,DEVIOS(F) ;RESTORE S
POPJ P, ;RETURN
;ROUTINE TO PERFORM SKIP FILE
TPMFSF: PUSHJ P,TAPFOL## ;FILE OPERATION LEGAL?
JRST MTAPG1 ;YES, DON'T DO MULTIPLE SKIP REC OPS
MOVE T1,P1 ;COPY IORB
MOVEI P1,RB.FSR ;SKIP RECORD FUNCTION CODE
DPB P1,PRBFCN## ;CHANGE SO SIMULATION WORKS
MOVE P1,T1 ;RESTORE IORB
PUSHJ P,TPSKPS ;CALL SKIP SET (RETURN WITH S SETUP)
TRNE S,IODEND!IODERR ;SEEN EOF OR DEVICE ERROR?
PJRST TPMISX ;GO CLEAR LABELER STUFF
TPMFS0: MOVEI T1,MT.FSF ;GO 'ROUND AGAIN
JRST MTAP ;...
;ROUTINE TO PERFORM BACKSPACE FILE
TPMBSF: PUSHJ P,TAPFOL## ;FILE OPERATION LEGAL?
JRST MTAPG1 ;YES, DON'T DO MULTIPLE SKIP REC OPS
MOVE T1,P1 ;COPY IORB
MOVEI P1,RB.FBR ;BACKSPACE RECORD FUNCTION CODE
DPB P1,PRBFCN## ;CHANGE SO SIMULATION WORKS
MOVE P1,T1 ;RESTORE IORB
PUSHJ P,TPSKPS ;CALL SKIP SET (RETURN WITH S SETUP)
TRNE S,IODEND!IOBOT!IODERR ;ERRORS?
PJRST TPMISX ;GO CLEAR LABELER STUFF
MOVEI T1,MT.BSF ;CALL BACKSPACE AGAIN
JRST MTAP ;SKIP SOME MORE
;ROUTINE CALLED TO SET UP MULTIPLE SKIPPING OPERATION
;RETURN S WITH STATUS OF OUTCOME
TPSKPS: HRRZ T1,-1(P) ;HAVE WE JUST BEEN HERE?
CAIE T1,TPSKPX+1 ; (IF SO, WE CAME THROUGH HNGSTP)
JRST TPSKP0 ;NO, CARRY ON
POP P,(P) ;YES, REMOVE LAST 2 CALLS FROM
POP P,(P) ; LIST SO AS NOT TO GET AN EPO
TPSKP0: HRRZ T1,TKBSTS(W) ;GET QUANTUM
PUSHJ P,MTAPGO ;START OP
TPSKPW::MOVEI T1,MT.WAT ;WAIT OP CODE
TPSKPX: PUSHJ P,MTAP ;GO EXECUTE
MOVE S,DEVIOS(F) ;SET UP S
POPJ P, ;RETURN
;ROUTINE TO SKIP TO LOGICAL EOT
TPMSET: PUSHJ P,MTAPG1 ;DO BSR FIRST
PUSHJ P,TPSKPW ;WAIT
TPMST1: PUSHJ P,TPMFS0 ;FORWARD SKIP FILE
TRNE S,IODERR ;DEVICE ERROR
POPJ P, ;YES - RETURN
MOVEI T1,MT.FSR ;PLUS ONE RECORD
PUSHJ P,MTAP ;...
PUSHJ P,TPSKPW ;WAIT TILL DONE
TRNE S,IODERR ;DEVICE ERROR?
POPJ P, ;YES - RETURN
TRNN S,IODEND ;2ND EOF?
JRST TPMST1 ;NO - TRY AGAIN
MOVEI T1,MT.BSR ;BACKSPACE OVER EOF
PUSHJ P,MTAP ;DO IT
PJRST TPSKPW ;QUEUE YELLOW BALL AND RETURN
SUBTTL DIAG UUO INTERFACE
TPMDIA::EXP TPMPPR ;PREPROCESSOR ROUTINE
DIAFNC (CTC,TPDCTC,TPDCTC) ;CONTROL-C ENTRY FROM MONITOR
DIAFNC (ASU,TPDASU,TPDASU) ;ASSIGN SINGLE UNIT
DIAFNC (AAU,TPDAAU,TPDAAU) ;ASSIGN ALL UNITS
DIAFNC (RAU,TPDRCU,TPDRCU) ;RELEASE ALL UNITS
DIAFNC (SCP,TPDSCP,CPOPJ##) ;SPECIFY CHANNEL PROGRAM
DIAFNC (RCP,TPDRCP,CPOPJ##) ;RELEASE CHANNEL PROGRAM
DIAFNC (GCS,TPDGCS,CPOPJ##) ;GET CHANNEL STATUS
DIAFNC (AKU,TPDKUN,TPDKUN) ;GET KONTROLLER AND UNIT
DIAFNC (SCR,TPDSCR,CPOPJ##) ;SPECIFY CHN PGM FOR READ REV
DIAFNC (ELD,TPDELD,TPDELD) ;ENABLE MICROCODE LOADING
DIAFNC (DLD,TPDDLD,TPDDLD) ;DISABLE MICROCODE LOADING
DIAFNC (LOD,TPDLOD,TPDLOD) ;LOAD MICROCODE
DIAFNC (SDS,TPDSDS,TPDSDS) ;SET DEVICE STATUS
DIAFNC ;TERMINATE TABLE
TPMPPR: JRST (P3) ;GO PROCESS DIAG. UUO
; ENABLE/DISABLE MICROCODE LOADING
TPDDLD: TDZA T1,T1 ;DISABLE
TPDELD: MOVEI T1,1 ;ENABLE
MOVE T2,KDBDSP(W) ;GET DISPATCH TABLE
PUSHJ P,@TPKEDL(T2) ;TOGGLE THE BIT
JRST DIAANM## ;MICROCODE NOT AVAILABLE
JRST CPOPJ1## ;RETURN
; LOAD MICROCODE
TPDLOD: MOVE T2,KDBDSP(W) ;GET DISPATCH TABLE
PUSHJ P,@TPKLOD(T2) ;LOAD MICROCODE
JRST DIAARF## ;COULDN'T
JRST CPOPJ1## ;RETURN
;SET DEVICE STATUS
TPDSDS:
IFN FTMP,<
MOVE T1,KDBCAM(W) ;FETCH CPU MASK
PUSHJ P,CPUOK## ;FIND A RUNNING CPU
JRST DIAANR## ;CPU NOT RUNNING
PUSHJ P,ONCPUS## ;TRY TO GET THERE
JRST DIAANR## ;CPU NOT RUNNING
> ;END IFN FTMP
PUSHJ P,GETWD1## ;GET NEXT ARGUMNET
CAIL T1,0 ;RANGE
CAILE T1,SDSLEN ; CHECK
JRST DIAABA## ;BAD ARGUMENT LIST
PUSHJ P,SAVE3## ;SAVE SOME ACS
MOVE P2,T1 ;SAVE SUB-FUNCTION CODE
SETZB P1,P3 ;ASSUME DOING ONLY ONE UNIT
JUMPGE U,TPDSD1 ;ROMP THROUGH LOOP ONLY ONCE
MOVNI P3,1 ;REMEMBER DOING THE WHOLE KONTROLLER
PUSHJ P,@SDSTAB(P2) ;DO KONT STUFF BEFORE LOOPING THROUGH DRIVES
POPJ P, ;PROPAGATE ERROR BACK
MOVE T1,KDBDSP(W) ;POINT TO DRIVER DISPATCH
LDB P1,[POINTR (DRVCF2(T1),DR.HDN)] ;GET HIGHEST DRIVE ON KONT
SETZ U, ;START WITH FIRST DRIVE
TPDSD1: MOVE T1,KDBIUN(W) ;DRIVE TABLE
TPDSD2: SKIPN T2,(T1) ;GET A UDB
JRST TPDSD3 ;NONE THERE
CAMN U,UDBPDN(T2) ;FOUND THE UDB?
JRST TPDSD4 ;YES
TPDSD3: CAMGE T1,KDBFUN(W) ;END OF TABLE?
AOJA T1,TPDSD2 ;KEEP SEARCHING
HRROS U ;FLAG A NON-EXISTANT DRIVE
TPDSD4: PUSHJ P,@SDSTAB(P2) ;DISPATCH
POPJ P, ;PROPAGATE ERROR BACK
HRRZS U ;INCASE LAST DRIVE DIDN'T EXIST
AOS U ;ADVANCE TO NEXT
SOJGE P1,TPDSD1 ;LOOP FOR ANOTHER
JRST CPOPJ1## ;RETURN
SDSTAB: IFIW SDSIGN ;SET IGNORE
IFIW SDSCLR ;CLEAR IGNORE
IFIW SDSDET ;SET DETACHE
IFIW SDSATT ;SET ATTACHED
SDSLEN==.-SDSTAB ;LENGTH OF TABLE
;SET IGNORE
SDSIGN: CAMN U,[EXP -1] ;KONTROLLER?
JRST CPOPJ1## ;MEANINGLESS
JUMPGE U,CPOPJ1## ;CAN'T IGNORE AN KNOWN DRIVE
HRRZ T1,U ;COPY PHYSICAL DRIVE NUMBER
MOVE T2,[1,,KDBIUM] ;STATE,,MASK WORD OFFSET
PUSHJ P,AUTMSK## ;SET DRIVE IGNORED
JRST DIAAIU## ;ILLEGAL UNIT
JRST CPOPJ1## ;RETURN
;CLEAR IGNORE
SDSCLR: CAMN U,[EXP -1] ;KONTROLLER?
JRST CPOPJ1## ;MEANINGLESS
HRRZ T1,U ;GET DRIVE NUMBER
MOVEI T2,KDBIUM ;STATE,,MASK WORD OFFSET
PUSHJ P,AUTMSK## ;CLEAR DRIVE IGNORED
JRST DIAAIU## ;ILLEGAL UNIT
JRST CPOPJ1## ;RETURN
;SET DETACHED
SDSDET: CAME U,[EXP -1] ;DETACH KONTROLLER?
JRST SDSDE1 ;SINGLE DRIVE
PUSHJ P,TPDKI0 ;STOP I/O ON THIS KONTROLLER
POPJ P, ;PROPAGATE FAILURE
HRRZS TKBJOB(W) ;OWNED BY JOB 0
JRST CPOPJ1## ;RETURN SUCCESS
SDSDE1: JUMPL U,CPOPJ1## ;CANNOT DETACH AN UNKNOWN DRIVE
MOVE T1,KDBIUN(W) ;DRIVE TABLE
SDSDE2: MOVE T2,(T1) ;GET A UDB
CAMN U,UDBPDN(T2) ;FOUND THE UDB?
JRST SDSDE3 ;YES
CAMGE T1,KDBFUN(W) ;END OF TABLE?
AOJA T1,SDSDE2 ;KEEP SEARCHING
JRST CPOPJ1## ;NOT THERE???
SDSDE3: PUSH P,U ;SAVE U
MOVE U,T2 ;COPY UDB ADDRESS
MOVE F,UDBDDB(U) ;GET DDB ADDRESS TOO
PUSHJ P,DDBDET## ;DETACH SINGLE DRIVE
JFCL ;ALREADY ASSIGNED TO SOME JOB
MOVE U,UDBPDN(U) ;GET DRIVE NUMBER
PUSHJ P,SDSCLR ;MAKE SURE IGNORE IS CLEARED
JFCL ;ALWAYS SKIPS
MOVE U,TDVUDB(F) ;RESET UDB ADDRESS
PUSHJ P,TAPMPD## ;REPORT CHANGE TO [SYSTEM]MDA
JRST UPOPJ1## ;RESTORE U AND RETURN
;SET ATTACHED
SDSATT: CAME U,[EXP -1] ;ATTACH KONTROLLER?
JRST SDSAT1 ;SINGLE DRIVE
SYSPIF ;INTERLOCK
MOVSI T1,TKSNS## ;DIAG BIT
TDNN T1,TKBSTS(W) ;IS THIS KONTROLLER STOPPED?
JRST SDSATE ;NO, ERROR
HLRZ T1,TKBJOB(W) ;YES, BUT BY WHAT JOB?
JUMPE T1,SDSAT0 ;ERROR IF NOT ASSIGNED TO JOB ZERO
SDSATE: SYSPIN ;ERROR - PI BACK ON AND
JRST DIAAAF## ;GIVE ATTACH FAILED ERROR
SDSAT0: HRLM J,TKBJOB(W) ;MAKE IT LOOK NORMAL TO TPDSI0
SYSPIN ;DONE WITH CRITICAL SECTION
PUSHJ P,TPDSI0 ;START I/O ON THIS KONTROLLER
POPJ P, ;PROPAGATE FAILURE
JRST CPOPJ1## ;OR SUCCESS
SDSAT1: PUSHJ P,AUTLOK## ;GET AUTCON INTERLOCK
JRST SDSAT1 ;SPIN IF AT CLOCK LEVEL
PUSH P,U ;SAVE U
PUSH P,P1 ;SAVE P1
HLLZ P1,KDBIUN(W) ;MASSBUS UNIT
HRRI P1,(U) ;PHYSICAL DRIVE NUMBER
MOVE T1,KDBDVC(W) ;DEVICE CODE
MOVE T2,KDBDSP(W) ;DRIVER DISPATCH
MOVE T3,KDBCHN(W) ;CHANNEL DATA BLOCK
PUSHJ P,AUTSET## ;SET UP CPU VARIABLES
MOVE T1,KDBDSP(W) ;DISPATCH
PUSHJ P,@TPKDRV(T1) ;TRY TO CONFIGURE A DRIVE
TDZA T1,T1 ;FAILED
MOVNI T1,1 ;SUCCESS
POP P,P1 ;RESTORE P1
POP P,U ;RESTORE U
PUSHJ P,AUTULK## ;RELEASE AUTCON INTERLOCK
JUMPN T1,SDSAT2 ;CONTINUE IF SUCCESSFUL
SKIPGE U ;SKIP IF DRIVE EXISTS BUT ATTACH FAILED
JUMPL P3,CPOPJ1## ;RETURN IF NON-EXISTANT DRIVE & ATTACHING KONT
JRST DIAAAF## ;ELSE TAKE ERROR RETURN
SDSAT2: MOVEI T1,ASSCON ;BIT TO TEST
LDB T2,PJOBN## ;GET DDB OWNER
TDNE T1,DEVMOD(F) ;ASSIGNED?
JUMPN T2,DIAAAF## ;ERROR IF OWNED BY NULL JOB (DETACHED)
JRST CPOPJ1## ;ELSE RETURN GOODNESS
;HERE TO ASSIGN SOME UNIT
TPDASU: PUSHJ P,TPDTST ;SEE IF WE CAN GRAB UNIT
POPJ P, ;SOMEONE ELSE DOES
MOVEM T1,TUBCNF(U) ;UPDATE TUBCNF WITH TUCDIG BIT ON
DPB J,PJOBN## ;SET JOB NUMBER IN DDB
JRST TPDHVF
;HERE TO DETACH A TAPE KONTROLLER
;CALLED ON OWNING CPU BY RECON. UUO WITH KDB ADDRESS IN P1
TPMDET::PUSH P,W ;SAVE PDB ADDRESS
MOVE W,P1 ;PUT KDB ADDRESS WHERE IT BELONGS
PUSHJ P,TPDKI0 ;STOP I/O ON THIS KONTROLLER
JRST WPOPJ## ;PROPAGATE FAILURE
HRRZS TKBJOB(W) ;OWNED BY JOB 0
JRST WPOPJ1## ;RETURN SUCCESS
;HERE TO START/STOP I/O ON THE SPECIFIED KONTROLLER
TPDKIO::MOVSI T1,JP.POK ;CHECK FOR PRIVILEGES
PUSHJ P,PRVBIT## ;...
SKIPA ;PRIVILEGED, SKIP
JRST DIAANP## ;ERROR
PUSHJ P,GETWD1## ;GET NEXT WORD (DEVICE)
JUMPE T1,TPDKI6 ;WANTS ALL TAPE I/O
PUSHJ P,CHKGEN## ;GET GENERIC POINTER
JRST [SETZ F, ;CLEAR STALE DDB
JRST DIAAIU##] ;DONE
MOVE W,TDVUDB(F) ;POINT TO THE UDB
MOVE W,UDBKDB(W) ;AND TO THE PRIMARY KDB
SETZ F, ;**NOT AN I/O UUO***
JUMPE W,DIAAIU## ;?NO KDB?
;FALL INTO TPDKI0
TPDKI0: PUSHJ P,SAVE2## ;SAVE P1 AND P2
SYSPIF
HLRZ T1,TKBJOB(W) ;GET MAINTENANCE JOB
CAIE T1,(J) ;IS IT ME?
JUMPN T1,[SYSPIN ;NO
JRST DIAAAJ##] ;SOMEONE ELSE ALREADY
MOVSI T1,TKSNS## ;DIAG BIT
TDNE T1,TKBSTS(W) ;IS THIS A NO-OP?
JRST [SYSPIN ;YES
JRST CPOPJ1##] ;RETURN VACUOUSLY
IORM T1,TKBSTS(W) ;NO, LIGHT THE BIT
HRLM J,TKBJOB(W) ;IT'S US NOW
SYSPIN
TPDKI1: MOVSI T1,TKSSEL ;HAS IT STOPPED YET?
TDNN T1,TKBSTS(W) ;?
JRST TPDKI2 ;CHECK REWIND STATUS
MOVEI T1,2
PUSHJ P,SLEEPF## ;WAIT A BIT
JRST TPDKI1
TPDKI2: MOVE P1,KDBIUN(W) ;POINTER TO UDB TABLE
MOVSI P2,TUSREW## ;REWINDING BIT
TPDKI3: SKIPE U,(P1) ;ANY?
TPDKI4: TDNN P2,TUBSTS(U) ;YES, IS IT REWINDING?
JRST TPDKI5 ;NO
MOVEI T1,2
PUSHJ P,SLEEP## ;WAIT A BIT
JRST TPDKI4 ;CHECK AGAIN
TPDKI5: CAMGE P1,KDBFUN(W) ;FINAL UDB?
AOJA P1,TPDKI3 ;LOOP FOR MORE
JRST CPOPJ1## ;DONE
;HERE TO STOP I/O ON ALL MAG TAPE KONTROLLERS
TPDKI6: SKIPA W,KDBTAB##+.TYMTA ;POINT TO FIRST KDB
TPDKI7: MOVE W,KDBNXT(W) ;POINT TO NEXT KDB
JUMPE W,CPOPJ1## ;DONE
PUSHJ P,TPDKI0 ;SHUT DOWN THE I/O HERE
JRST TPDKI9 ;OOPS, UNDO WHAT WE DID
JRST TPDKI7 ;NEXT KDB
TPDKI9: PUSH P,T1 ;SAVE ERROR
PUSHJ P,TPDSIA ;CRANK IT UP AGAIN
JFCL
POP P,T1 ;RESTORE ERROR
PJRST STOTAC## ;IN CASE SIO CLEARED IT
;HERE TO ATTACH A TAPE KONTROLLER
;CALLED ON OWNING CPU BY RECON. UUO WITH KDB ADDRESS IN P1
TPMATT::PUSH P,W ;SAVE PDB ADDRESS
MOVE W,P1 ;PUT KDB ADDRESS WHERE IT BELONGS
SYSPIF ;INTERLOCK
MOVSI T1,TKSNS## ;DIAG BIT
TDNN T1,TKBSTS(W) ;IS THIS KONTROLLER STOPPED?
JRST [SYSPIN ;NO
JRST WPOPJ##] ;GIVE ERROR RETURN
HLRZ T1,TKBJOB(W) ;YES, BUT BY WHAT JOB?
JUMPN T1,[SYSPIN ;DETACH ASSIGNED IT JOB ZERO
JRST WPOPJ##] ;SO ATTACH ONLY TAKES IT BACK FROM THERE
HRLM J,TKBJOB(W) ;MAKE IT LOOK NORMAL TO TPDSI0
SYSPIN ;DONE WITH CRITICAL SECTION
PUSHJ P,TPDSI0 ;START I/O ON THIS KONTROLLER
JRST WPOPJ## ;PROPAGATE FAILURE
JRST WPOPJ1## ;OR SUCCESS
;HERE TO START I/O UP AGAIN
TPDSIO::MOVE P1,T1 ;SAVE ORIGINAL ARG
MOVSI T1,JP.POK ;CHECK FOR PRIVILEGES
PUSHJ P,PRVBIT## ;...
SKIPA ;PRIVILEGED, SKIP
JRST DIAANP## ;ERROR
PUSHJ P,GETWD1## ;GET NEXT
JUMPE T1,TPDSIA ;FIX ALL OF THEM WE OWN
PUSHJ P,CHKGEN## ;GET DEVICE NAME
JRST [SETZ F,
JRST DIAAIU##] ;CAN'T FIND DEVICE
MOVE W,TDVUDB(F) ;POINT TO THE UDB
MOVE W,UDBKDB(W) ;AND TO THE PRIMARY KDB
SETZ F, ;**DON'T OWN THIS DDB**
JUMPE W,DIAAIU## ;NO SUCH DEVICE
TPDSI0: HLRZ T1,TKBJOB(W) ;GET MAINTENACE OWNER
CAIE T1,(J) ;IS IT ME?
JRST DIAAAJ## ;OWNED BY SOMEONE ELSE
MOVSI T1,TKSNS##
ANDCAM T1,TKBSTS(W)
HRRZS TKBJOB(W) ;WE DON'T ANY MORE
AOS (P)
IFN FTMP,<
MOVE T1,KDBCAM(W) ;GET CPU FOR SPECIFIED KONTROLLER
PUSHJ P,CPUOK## ;IS IT RUNNING?
POPJ P, ;NO
PUSHJ P,ONCPUS## ;GET US ONTO THAT CPU
POPJ P, ;NOT RUNNING
> ;END IFN FTMP
MOVE T1,KDBDSP(W) ;CLANK SCHED TO LOOK
PJRST @TPKSCH(T1)
TPDSIA::SKIPA W,KDBTAB##+.TYMTA ;POINT TO FIRST KDB
TPDSI6: MOVE W,KDBNXT(W) ;POINT TO NEXT KDB
JUMPE W,TPDSI7 ;DONE
PUSHJ P,TPDSI0 ;START I/O ON THIS ONE
JFCL ;DON'T OWN IT
JRST TPDSI6
TPDSI7: JUMPL M,CPOPJ ;FROM DIACLR
AOS (P) ;SKIP RETURN
MOVE T1,P1
PJRST STOTAC## ;RESTORE ORIGINAL ARG
;HERE TO ASSIGN ALL UNITS ON A CONTROLLER
TPDAAU: MOVE T3,KDBIUN(W) ;POINTER TO UDB TABLE
TPDAA1: SKIPE U,(T3) ;HAVE A UDB
PUSHJ P,TPDTST
JUMPN U,CPOPJ##
CAMGE T3,KDBFUN(W) ;FINAL UDB?
AOJA T3,TPDAA1 ;LOOP FOR MORE
DDBSRL ;GET DDB INTERLOCK
MOVE T3,KDBIUN(W) ;POINTER TO UDB TABLE
MOVEI T1,TUCDIG##
PUSH P,[EXP 0] ;RESERVE STORAGE FOR A UDB ADDRESS
TPDAA2: SKIPE U,(T3)
JRST [IORM T1,TUBCNF(U) ;TURN ON DIAG BIT
MOVE F,UDBDDB(U) ;GET DDB ADDRESS
DPB J,PJOBN## ;SET JOB NUMBER IN DDB
JRST .+1]
SKIPN (P) ;FOUND THE FIRST UDB YET?
MOVEM U,(P) ;SAVE ADDRESS NOW
CAMGE T3,KDBFUN(W) ;FINAL UDB?
AOJA T3,TPDAA2 ;LOOP FOR MORE
DDBSRU ;RELEASE DDB INTERLOCK
POP P,U ;GET SAVED UDB ADDRESS BACK
TPDHVF: SKIPE DIATAP ;NO TAPE DIAGS?
CAMN J,DIATAP ;OR SAME JOB?
JRST TPDSCH
PUSH P,T1 ;SAVE TUBCNF BITS OR TUCDIG BIT
MOVEI T1,2
PUSHJ P,SLEEPF##
POP P,T1
JRST TPDHVF
TPDSCH: PUSH P,W ;SAVE KDB
PUSHJ P,FNDPDS## ;FIND THE PDB
HRROM F,.PDDIA##(W) ;UPDATE DIAG DDB (WITH ONLY ONE OR ONE OF MANY)
POP P,W ;RESTORE KDB
MOVEM J,DIATAP ;SAVE JOB CURRENTLY DOING TAPE DIAGS
MOVSI T1,NSWP!NSHF
IORM T1,JBTSTS##(J)
PJRST CPOPJ1## ;AND TAKE GOOD RETURN
;PRESERVES T3
TPDTST: MOVE F,UDBDDB(U)
MOVE T1,TUBCNF(U)
LDB T2,PJOBN##
CAME T2,.CPJOB##
JUMPN T2,DIAAAJ##
TRO T1,TUCDIG##
JRST CPOPJ1##
;HERE ON ^C, HALT, EXIT, ETC WITH F=DIAGING DDB
TPDCTC: MOVE U,TDVUDB(F) ;UDB ADDRESS
MOVE W,UDBKDB(U) ;KDB ADDRESS (PRIMARY)
SOS (P)
;HERE TO RELEASE ALL UNITS
TPDRCU: JUMPE F,CPOPJ1##
IFN FTKL10,<PUSHJ P,TPDRCX> ;RETURN ANY IOWD
MOVEI T1,TUCDIG##
MOVE T2,KDBIUN(W) ;POINTER TO UDB TABLE
SETZ T4,
PUSH P,U
DDBSRL ;GET DDB INTERLOCK
TPDRC1: SKIPE U,(T2)
TDNN T1,TUBCNF(U)
JRST TPDRC2
MOVE F,UDBDDB(U)
LDB T3,PJOBN##
CAME T3,J
JRST TPDRC2
ANDCAM T1,TUBCNF(U)
DPB T4,PJOBN##
TPDRC2: CAMGE T2,KDBFUN(W) ;FINAL UDB?
AOJA T2,TPDRC1 ;LOOP FOR MORE
DDBSRU ;RELEASE DDB INTERLOCK
POP P,U
PUSH P,W ;SAVE KDB
PUSHJ P,FNDPDS## ;FIND THE PDB
SETZM .PDDIA##(W) ;CLEAR DIAG DDB
POP P,W ;RESTORE KDB
SETZM DIATAP
HRRZ T1,TUBQUE(U)
JUMPE T1,CPOPJ1##
PUSHJ P,TPMFLS ;GIVE UP IORB, START SOME OTHER TAPE
JRST CPOPJ1##
IFN FTKL10,<
;HERE TO SET UP A CHANNEL PROGRAM
TPDSCP: TDZA P4,P4 ;NORMAL CHANNEL PROGRAM
TPDSCR: MOVNI P4,1 ;READ REVERSE CHANNEL PROGRAM
JUMPE F,DIAAAU## ;NO ASS'D UNITS
IFN FTKL10,<PUSHJ P,TPDRCX> ;RETURN ANY IOWD
PUSHJ P,GETWD1## ;GET IOWD
HLRE T2,T1 ;LENGTH OF IOWD
JUMPE T2,DIAACP## ;TOO BIG IF 0
SKIPE P4 ;REVERSE?
ADD T1,T2 ;YES. POINT TO START
MOVE P3,T1 ;UNRELOCATED IOWD
MOVEI T1,1(T1) ;START ADDRESS
MOVNS T2 ;+LENGTH
ADDI T2,-1(T1) ;TOP ADDRESS
PUSHJ P,ZRNGE## ;MAKE SURE THE PAGES ARE OK
JRST DIAACP## ;SOME PAGE NOT THERE, BOMB HIM OUT
HRRZ T1,TUBQUE(U)
JUMPN T1,TPDSC0 ;JUMP IF HAVE AN IORB
MOVEI P2,RB.FYB ;DUMMY FUNCTION
PUSHJ P,GENIOR ;GET AN IORB
JRST DIAAFC## ;NO FREE CORE
MOVEM T1,TDVIOR(F) ;SAVE ADDRESS
PUSHJ P,SETACS ;SET UP ACS
PUSHJ P,TAPRQT## ;QUEUE IT UP
HRRZ T1,TUBQUE(U) ;GET IORB ADDRESS BACK
TPDSC0: MOVE T2,P3 ;IOWD
SETZ T4, ;NOT BYTE MODE, DO ALL OF IOWD
TRO S,IOCON
TLZ S,IO
MOVE P1,T1
LDB T3,PRBMOD##
JUMPN T3,TPDSC1
MOVEI T3,RB.MCD ;CORE-DUMP IF NOT GIVEN
DPB T3,PRBMOD##
TPDSC1: PUSHJ P,MAKLST
JRST DIAAFC##
HRRZ T3,@IRBACC(T1)
MOVE T1,KDBICP(W)
MOVE T2,KDBCHN(W)
MOVE T2,CHNTYP(T2)
TLNE T2,CP.RH2
TLO T3,(INSVL.(.CCJMP,CC.OPC))
MOVEM T3,(T1)
PUSHJ P,STOTAC## ;TELL USER ICWA
JUMPE P4,TPDSC2 ;REVERSE?
TLZN T3,(INSVL.(.CCJMP,CC.OPC)) ;YES, RH20 - DEVICE?
JRST TPDSC2 ;CAN'T REVERSE LIST
HLRE T2,P3 ;REVERSE IT
MOVNS T2
PUSHJ P,REVCCW##
TPDSC2: PUSHJ P,CSDMP## ;SWEEP CACHE
JRST CPOPJ1## ;AND TAKE GOOD RETURN
> ;END IFN FTKL10
IFN FTKL10,<
;HERE TO RETURN A CHANNEL PROGRAM
TPDRCP: JUMPE F,CPOPJ1##
AOS (P)
TPDRCX: HRRZ T2,TUBQUE(U)
JUMPE T2,CPOPJ##
HRRZ T1,@IRBACC(T2)
HLLZS @IRBACC(T2)
JUMPN T1,RTNIOW##
POPJ P,
> ;END IFN FTKL10
IFN FTKL10,<
;HERE TO TELL USER FINAL CHANNEL STATISTICS
TPDGCS: JUMPE F,CPOPJ1##
MOVE P2,KDBICP(W)
PJRST DIAGCS##
> ;END IFN FTKL10
;ROUTINE TO GET CONTROLLER/UNIT NUMBERS
TPDKUN::MOVE U,TDVUDB(F) ;UNIT
MOVE T1,UDBKDB(U) ;KDB ADDRESS (PRIMARY)
MOVE T2,KDBDVC(T1) ;GET DEVICE CODE
HLRE T1,KDBUNI(T1) ;UNIT
SKIPGE T1 ;MULTI UNIT?
TDZA T1,T1 ;NO, JUST USE SLAVE ADDR
LSH T1,3 ;YES. SHIFT
ADD T1,UDBPDN(U) ;ADD IN PHYSICAL DRIVE NUMBER
LSH T2,2 ;MAKE DEVICE CODE 9 BITS
HRL T1,T2 ;DEVICE CODE TO LH,UNIT NO TO RH
AOS (P) ;GIVE SKIP RETURN
PJRST STOTAC## ;AND STORE VALUE IN USER'S AC
SUBTTL ERROR RECOVERY
;HERE ON TAPE UNIT HUNG FROM CLOCK1
TPMHNG: PUSHJ P,SAVE1## ;SAVE P1
PUSHJ P,SAVW## ;SAVE W
MOVE U,TDVUDB(F) ;UDB ADDRESS
MOVE T1,TUBAKA(U) ;GET ACTIVE KDB ADDRESS
TLZ T1,(1B0) ;CLEAR POSSIBLY INVALID BIT
MOVE T1,TKBSTS(T1) ;GET STS
TLNE T1,TKSNS## ;CONFIG DOING ITS THING?
JRST CPOPJ1## ;DON'T REALLY HANG IT THEN
SKIPL DEVIAD(F) ;JOB IN KONTROLLER WAIT?
JRST TPMHN1 ;NO, DON'T HAVE TO WAKE IT
MOVSI T1,OFLHNG ;WOKEN FROM KONTROLLER WAIT
ANDCAM T1,DEVIAD(F) ; BECAUSE OF A HUNG TIME OUT
LDB T1,PJOBN## ;JOB NUMBER
PUSHJ P,EWAKE## ;GET IT STARTED
TPMHN1: PUSHJ P,TAPHNG## ;INFORM LOWER LEVEL
TPMDQ: PUSHJ P,SAVE2## ;SAVE P1,P2
SKIPN P1,T1 ;SEE IF THERE WAS ONE
POPJ P, ;NO - JUST EXIT
IFN FTMP,<PUSHJ P,TAPCPU##> ;GET ONTO OWNING CPU
TPMDQ1: CAIN P1,TKBERB(W) ;CHECK FOR ERROR IORB
JRST [MOVE P2,IRBLNK(P1) ;TRY NEXT IF IT IS
JRST TPMDQ2] ;CHECK DONE
PUSHJ P,TPMRCW ;RETURN XFER LIST IF ANY
MOVE T2,P1 ;SET FOR GIVWDS
MOVEI T1,TRBLEN ;LENGTH
MOVE P2,IRBLNK(P1) ;GET LINK
PUSHJ P,GIVWDS## ;RETURN IORB
TPMDQ2: SKIPE P1,P2 ;CHECK FOR MORE
JRST TPMDQ1 ;YES - RETURN IT
PJRST TAPCTM## ;CLEAR HUNG TIMER
;HERE FROM GIVRES IN ERRCON
TPFREE::SKIPN KDBTAB##+.TYMTA ;ANY TAPES AT ALL ON SYSTEM?
POPJ P, ;NO, GO AWAY
MOVEI F,TDVDDB ;ADDRS OF FIRST DDB
PUSH P,U ;SAVE U
TPFRE1: MOVE T1,DEVMOD(F) ;GET TYPE INFO
TLNN T1,DVMTA ;STILL A MTA
JRST TPFRE2 ;DONE
LDB T1,PJOBN## ;YES - GET OWNING JOB
MOVE S,DEVIOS(F) ;AND SETUP S
CAMN T1,J ;BELONG TO US?
PUSHJ P,TPMHLD ;YES - GO SET ON HOLD
HLRZ F,DEVSER(F) ;LINK TO NEXT
JUMPN F,TPFRE1 ;AND CONTINUE
TPFRE2: MOVE W,KDBTAB##+.TYMTA ;START AT FIRST KONTROLLER
TPFRE3: HRRZ T1,TKBJOB(W) ;GET GET KDB OWNER
CAMN T1,J ;OWNED BY US?
PUSHJ P,TPMCMX ;YES, RELEASE MAINT MODE
SKIPE W,KDBNXT(W) ;NEXT KONTROLLER
JRST TPFRE3 ;GO TEST IT
PJRST UPOPJ## ;DONE IF NONE LEFT
TPMHLD::MOVE U,TDVUDB(F) ;UDB ADDRESS
SKIPG W,TUBAKA(U) ;AND ACTIVE KDB ADDRESS IF SELECTED
POPJ P, ;THERE ISNT ONE
IFN FTTLAB,<
SKIPN TUBDDL(U) ;LABEL DDB ADDRESS
JRST TPHLD1 ;OK IF NONE
PUSH P,F ;SAVE F
TLZ F,-1-MXSECN ;CLEAR POSSIBLE JUNK FROM UUOCON
CAME F,TUBDDL(U) ;LABEL DDB ADDRESS?
JRST FPOPJ## ;NO--THEN EXIT
POP P,F ;RESTORE F
> ;END IFN FTTLAB
TPHLD1: TRNN S,IOACT ;ACTIVE?
PJRST TAPHLD## ;NO - CALL TAPSER
MOVSI T1,TUSNS## ;ELSE SET NO SCHED
IORM T1,TUBSTS(U) ; AND WAIT FOR I/O TO CEASE
POPJ P,
;ROUTINE CALLED FROM TAPSER WHEN KONTROLLER IS FOUND OFF-LINE
TPMOFL::MOVSI T1,TKSSIL## ;BIT FOR SILENCE
TDNN T1,TKBSTS(W) ;WANT TO HEAR?
SKIPGE DEBUGF## ; FOR ANY REASON
POPJ P, ; DEBUG MODE OR SILENCED
MOVE T2,STATES##
TRNE T2,ST.NOP ;OPR IN ATTENDANCE?
IORM T1,TKBSTS(W) ;NO, ONLY TYPE THE MESSAGE ONCE
PUSHJ P,SAVE2## ;SAVE P1,P2
MOVE P1,U ;UDB ADDRS TO P1
MOVE P2,W ;KDB ADDRS TO P2
MOVE U,OPRLDB## ;GET OPR ADDRS TO SEND MSG
PUSHJ P,INLMES## ;NOW INFORM HIM
ASCIZ "
%% Tape controller "
MOVE T2,KDBNAM(P2) ;NAME
PUSHJ P,PRNAME## ;PRINT IT
PUSHJ P,INLMES## ;REST OF MSG
ASCIZ " is off-line
"
MOVE U,P1 ;RESTORE STUFF
MOVE W,P2 ;...
POPJ P, ;RETURN
;ROUTINE TO SET SILENCE IF C(T1) IS A TAPE KONTROLLER
;CALL: MOVE T1,<KONTROLLER ID>
; PUSHJ P,TPMSIL
; RETURN HERE IF OK
; RETURN HERE TO PROCEED
;T1 - PRESERVED
TPMSIL::PUSH P,T1 ;SAVE ARG
PUSH P,W ;SAVE W
SKIPN W,KDBTAB##+.TYMTA ;GET FIRST KDB
JRST TPMSLX ;NO TAPES ANYWHERE
TPMSLL: CAMN T1,KDBNAM(W) ;THIS ONE?
JRST TPMSL1 ;YES - SET BIT
SKIPE W,KDBNXT(W) ;NO--LINK TO NEXT
JRST TPMSLL ;GO CHECK IT
TPMSLX: POP P,W ;RESTORE W
PJRST TPOPJ1## ;SKIP RETURN
TPMSL1: MOVSI T2,TKSSIL## ;BIT TO SET IN KDB
IORM T2,TKBSTS(W) ;...
POP P,W
PJRST TPOPJ## ;RETURN
;TAPSER INITIATION
TPMINI: SE1ENT ;ENTER SECTION ONE
PUSHJ P,SAVE1## ;SAVE P1
MOVE T1,[TUBRID,,TDVDDB] ;REELID OFFSET,,FIRST DDB
MOVEM T1,CNFMTA## ;SAVE FOR DAEMON ERROR REPORTING
MOVEI T1,UDBDDB ;OFFSET TO DDB
MOVEM T1,TAPDDP## ;SAVE FOR GETTABS
IFN FTMP,<
MOVEI T1,[IORM T2,.CPCHX##-.CPCDB##(P1) ;STORE CACHE SWEEP BIT
LSH T2,1 ;POSITION FOR NEXT CPU
POPJ P,] ;RETURN
MOVSI T2,TKSCHX## ;GET CACHE SWEEP BIT
PUSHJ P,CPUAPP## ;STUFF INTO ALL THE CDBS
> ;END IFN FTMP
POPJ P, ;RETURN
;OUTPUT ERROR DETECTED - CHECK FOR WRITE LOCK
DMPERR: ;DUMP MODE ERRORS
OUTERR: TRNE S,IOIMPM ;WRITE LOCKED?
JRST (P2) ;YES - JUST RETURN
;INPUT AND SPACING ERROR
; ALSO COMMON CODE TO OUTPUT ERRORS
SPERR:
INPERR: MOVSI T1,TUSREW## ;CLR REWINDING INFO
ANDCAM T1,TUBSTS(U) ;ON ANY ERROR
HLRZ T1,TRBSTS(P1) ;GET ERROR INFO
IFN FTTLAB,<
TLNE S,LBLNED ;NEED PROCESSING?
JRST ERRLBL ;YES - SCHEDULE
> ;END IFN FTTLAB
PUSHJ P,TPEMOV
TRNE T1,RB.SOL ;OFF-LINE?
JRST ERROFL ;YES, HANDLE IT
TRNN T1,RB.SER!RB.SRE ;NON-RECOV OR RECOVERED
TRNE S,IONRCK ;USER WANT JUST TO TRY?
JRST ERRX1 ;JUST LOG ERROR & EXIT
SETZM TUBTRY(U) ;CLEAR ATTEMPT COUNTER
MOVEI T2,DEPDER ;ERROR RETRY DISABLED?
TDNE T2,DEVSTA(F)
JRST ERRX1 ;YES, LOG AND EXIT
PJRST TAPERP## ; AND TRY TO RECOVER
;HERE TO HANDLE UNIT OFF-LINE (FLUSH IORB AND RETURN TO UUO LEVEL
IFN FTTLAB,<
ERRLBL: PUSH P,T1 ;SAVE TRBSTS FOR LATER
MOVEI T1,LR.TM ;ASSUME TAPE MARK
DPB T1,TUYRQT ;PUT IN CORRECT REQUEST
MOVE T1,P1 ;LOC OF IORB
LDB T1,PRBFCN## ;WHAT WE'RE DOING
CAIE T1,RB.FRD ;IF A READ,
CAIN T1,RB.FRB
TLOA S,LBLEOF ; TURN ON A FUNNY BIT
JRST [POP P,T1 ; RESTORE TRBSTS
JRST ERROF1] ; AND CLEAR IODEND SO AS NOT
LDB T1,PIOMOD## ;BUFFERED MODE?
CAIL T1,SD
JRST ERRLB1 ;NO
MOVSI T2,IOEND ;YES, SAVE BIT IN BUFFER S-WORD
PUSHJ P,TPMXCI ; TO TELL USER WE SAW EOF
EXCTXU <MOVEM T2,-1(T1)>
ERRLB1: POP P,T1 ;RESTORE TRBSTS
TRZA S,IODEND ; TO CONFUSE UUOCON
> ;END IFN FTTLAB
ERROFL: TLO S,OFFLIN ;SET OFF-LINE IN DEVIOS
TRNN T1,RB.SMO ;MONITOR DIRECTED OFF-LINE ?
JRST ERROF1 ;NO -
MOVSI T1,(1B1) ;MDO IS UNRECOVERABLE
IORM T1,TUBTRY(U) ;
PUSHJ P,TPELOG ;LOG THE ERROR
ERROF1: PUSHJ P,TPMRCW ;RETURN XFER LIST IF ANY
PUSHJ P,TPMRIO ;RETURN IORB
HLLZS TKBSTS(W) ;SET QUANTA TO ZERO
PJRST DEVERR## ;SET ERROR AND RETURN
;HERE WHEN TAPSER EITHER GAVE UP OR RECOVERED THE ERROR
ERRX1: TRNE T1,RB.SRE ;RECOVERED?
JRST ERRX2 ;YES - REPORT IF NECESSARY
TRNN T1,RB.SED ;ANY ERROR ?
JRST ERRX1A ;NO - LOOK FOR OTHER STUFF
TRO S,IODTER ;ASSUME DATA ERROR
TRNN T1,RB.SDE ;IS IT DEVICE ?
TRC S,IODTER!IODERR ;YES - CLEAR DATA/SET DEVICE
ERRX1A: TRNE T1,RB.STL ;READ ENUF ?
TRO S,IOBKTL ;SET BLOCK TOO LARGE
TRNE T1,RB.SLK!RB.SIL ;ATTEMPT TO WRITE W/O WRITE RING
TRO S,IOIMPM
MOVEM S,DEVIOS(F) ;SAVE
TRNE T1,RB.STL ;IS BLOCK-TOO-LONG
JRST ERRX4 ;INCLUDING DAEMON CALL
TLNE S,IO ;CHECK INPUT/OUTPUT
AOSA TUBHWE(U) ;HARD WRITE ERROR
AOS TUBHRE(U) ;HARD READ ERROR
MOVSI T1,(1B1) ;FLAG FOR DAEMON
IORM T1,TUBTRY(U) ;...
JRST ERRX3 ;GO LOG IT
;HERE ON RECOVERED ERRORS - CHECK IF LOGGING STILL ON
;ALSO DON'T LOG ERRORS THAT RECOVERED ON 1 RETRY
ERRX2: TLNE S,IO ;WHICH WAY
AOSA TUBSWE(U) ;SOFT WRITE ERROR
AOS TUBSRE(U) ;SOFT READ ERROR
HRRZ T1,TUBTRY(U) ;NO OF RETRIES
SKIPE [MTELOG##] ;LOG ALL ERRORS?
SOJLE T1,ERRX4 ;NO, GO IF WE WON ON 1ST RETRY
MOVE T1,TUBSWE(U) ;CHECK TOTAL SOFT ERRORS
ADD T1,TUBSRE(U)
CAILE T1,MTDAEM## ;BEYOND THRESHOLD?
JRST ERRX4 ;YES - DON'T LOG IT
ERRX3: PUSHJ P,TPELOG
ERRX4: TRNE S,IODERR
AOS TUBTDE(U) ;TOTAL DEVICE ERRORS
TRNE S,IODTER
AOS TUBTME(U) ;TOTAL MEDIA ERRORS
MOVE T1,KDBCHN(W) ;GET CDB
MOVE T2,CHNNUM(T1) ;GET CHANNEL ERROR BITS
TLNN T2,IOCHMP!IOCHNX ;WERE THERE ANY MEMORY ERRORS?
JRST (P2) ;NO--RETURN
HLLZ T3,CHNCSR(T1) ;GET CHANNEL FLAGS FOR SWEEP
TRO T3,UE.PEF ;ASSUME PARITY
TLNE T2,IOCHNX ;WAS IT A NXM?
TRC T3,UE.PEF!UE.NXM;YES--SET NXM
SETZM CHNNUM(T1) ;CLEAR CHNNUM
IORM T3,.CPAEF## ;SET REQUEST FOR MEMORY SCAN
JRST (P2) ;RETURN
SUBTTL UTILITY ROUTINES
;ROUTINE TO RELOCATE I/O BUFFER ADDRS
;CALL:; PUSHJ P,TPMXCI, OR TPMXCO
; <INSTR TO EXECUTE W/ T1 RELOCATED>
; RETURN HERE WITH T1 ALREADY RELOCATED
;ALL ACS EXCEPT T1 ARE PRESERVED
;INSTR MUST NOT REFERENCE P1-P4
TPMXCO: SKIPA T1,DEVOAD(F) ;USE OUTPUT BUFFER
TPMXCI: MOVE T1,DEVIAD(F) ;USE INPUT BUFFER
PUSHJ P,SAVE2## ;SAVE P1-P2
MOVE P2,@-3(P) ;GET INSTR TO XCT
MOVE P1,DEVTYP(F) ;SEE WHAT WE HAVE
TRNN P1,DEPEVM ;SKIP IF NO TM10A
MOVEI T1,@T1 ;RELOCATE KA STYLE
CONSZ PI,II.IPA ;SKIP IF AT UUO LEVEL
JRST [PUSHJ P,SVEUF##;ELSE - SET UP UBR
PUSHJ P,SPCS## ;AND PCS
JRST .+1] ;AND CONTINUE
SKIPE DEVEVM(F) ;EVM IN USE?
TLZ P2,(<17B12>) ;CLEAR AC FIELD
IFN FTMP,<PUSH P,T1> ;SAVE ADDRESS
XCT P2 ;CLANK INSTR
IFE FTMP,<JRST CPOPJ1##> ;RETURN & SKIP OVER INSTR
IFN FTMP,<
EXCH T1,(P) ;SAVE T1, GET ADDR
PUSHJ P,OUCHE## ;SWEEP THAT LOC OUT OF CACHE
JRST TPOPJ1## ;SKIP XCT'D INSTR AND RETURN
> ;END IFN FTMP
;ROUTINE TO GENERATE A PENDING IORB
;CALL: MOVE P2,FUNCTION
; PUSHJ P,GENIOR
; ... ERROR IF NO FREE SPACE
; RETURN HERE T1 := IORB
GENIOR: MOVEI T2,TRBLEN ;WORDS NEEDED FOR AN IORB
PUSHJ P,GETWDS## ;ALLOCATE CORE
POPJ P, ;SIGH
MOVSI T2,0(T1) ;START ADDRESS
HRRI T2,1(T1) ;MAKE A BLT POINTER
SETZM (T1) ;CLEAR FIRST WORD
BLT T2,TRBLEN-1(T1) ;CLEAR IORB
MOVEI T2,RB.RPN ;REQUEST PENDING
ROT T2,-RB.RQP-1 ;PUT IN PROPER PLACE
MOVEM T2,TRBFNC(T1) ;STASH
GNIOR1: DPB P2,PRBFCN## ;AND FUNCTION
LDB T2,TDYBYT ;GET MODE/PAR/DEN
TRZ T2,TDMDBY ;CLEAR ACTUAL DENSITY
PUSH P,T1 ;SAVE IORB ADDRESS
PUSH P,T2 ;AND P/D/M CUZ GETDEN TRASHES THEM
XMOVEI T2,IRBCCW(T1) ;***POINT TO BASE OF CCW TABLE
MOVEM T2,IRBACC(T1) ;***SET AS CURRENT
PUSHJ P,GETDEN ;GET THE DENSITY WE SHOULD USE
LSH T1,RB.MDS ;POSITION DENSITY AFTER MODE
IORM T1,(P) ;SAVE IT IN "BYT"
POP P,T2 ;GET "BYT" BACK
POP P,T1 ;AND THE ADDRESS
DPB T2,PRBBYT## ;SET INTO IORB
SETZM TRBSTS(T1) ;CLEAR REST OF BLOCK
SETZM TRBRCT(T1)
SETZM IRBIVA(T1) ;...
JRST CPOPJ1## ;GIVE GOOD RETURN
;ROUTINE TO SET UP CURRENT IORB
STOIOR: ROT T2,-RB.RQP-1 ;POSITION STATUS
HLLM T2,TRBFNC(T1) ;STORE IN LHS
JRST GNIOR1 ;CONTINUE SETUP
;ROUTINE TO WAIT FOR TAPE KONTROLLER
KONWAT: MOVSI T1,TKSOFL## ;IF UNIT IS OFF-LINE
TDNN T1,TUBSTS(U) ; DON'T CALL MSLEEP
PUSHJ P,CKREW ;CHECK FOR REWINDING
JRST KONWTN ;NOW SEE IF SELECTED
KONWT1: PUSHJ P,TAPCNT## ;MAKE SURE SCHED IS LISTENING
MOVEI T1,EV.TKW ;WAIT FOR TAPE KONTROLLER
PUSHJ P,KSLEEP ;WAIT FOR EVENT
;RETURN WHEN READY
KONWTN: MOVSI T1,TKSSEL## ;SEE IF WE GOT ONE
TDNN T1,TUBSTS(U) ;??
JRST KONWT1 ;NOPE - TRY AGAIN
HRRZ P1,TUBQUE(U) ;SET P1 TO POINT TO IORB
MOVE W,TUBAKA(U) ;SET UP WITH ACTIVE KDB ADDRESS
TLZ W,(1B0) ;CLEAR POSSIBLY INVALID BIT
CAME P1,TDVIOR(F) ;THIS THE RIGHT ONE?
JRST KONWT2 ;NO - SNOOZE SOME MORE
SETZM TDVIOR(F) ;CLEAR THIS ONE NOW
IFN FTMP,<PUSHJ P,TAPCPU##> ;MAKE SURE WE'RE ON CPU WITH A VALID KDB
POPJ P, ;RETURN
KONWT2: CAIE P1,TKBERB(W) ;IS IT THE ERP IORB (NEVER HAS IVA)
SKIPE IRBIVA(P1) ;IS THIS A "REAL" IORB?
JRST KONWT1 ;YES, REST ASSURED THAT SOMETHING WILL HAPPEN
PUSHJ P,TAPREM## ;NO, ITS AN IORB WHICH WILL NEVER BE USED
JRST KONWTN ; SO FLUSH IT AND TRY THE NEXT IORB
;ROUTINE TO WAIT FOR DRIVE TO FINISH REWINDING
CKREW: MOVSI T2,TUSREW## ;CHECK FOR REWIND
TDNN T2,TUBSTS(U) ;...
POPJ P, ;NOPE - RETURN
PUSH P,TDVIOR(F) ;SAVE IORB PNTR
CKREW1: MOVEI T1,TUCIRD## ;SEE IF THIS UNIT
TDNE T1,TUBCNF(U) ; WILL GIVE US AN INTERUPT
JRST CKREW2 ;WHEN IT FINISHES REWINDING
MOVSI T1,TKSSTD## ;NO - UNIT ALREADY ACTIVE?
TDNE T1,TUBSTS(U) ;...
JRST CKREW2 ;YES - HAVEN'T STARTED REWINDING YET
MOVEI P2,RB.FYB ;QUE UP WAIT REQUEST
PUSHJ P,GENIOR ;GEN IORB
JRST CKREW2 ;WAIT AND TRY AGAIN
MOVEM T1,TDVIOR(F) ;STASH AWAY
XMOVEI T2,CKREWD ;GO HERE ON INTERUPT
MOVEM T2,IRBIVA(T1) ;...
PUSHJ P,CPURQH## ;PUT AT HEAD OF Q
PUSHJ P,KONWTN ;WAIT FOR SELECTION
;RETURN P1 := IORB
PUSHJ P,TPSTRT ;GO START I/O?
MOVEI T1,EV.REW ;WAIT FOR REWIND STATUS
PUSHJ P,MSLEEP ;...
;FALL INTO CKREW2
;PREVIOUS PAGE FALLS INTO THIS
CKREW2: MOVSI T2,TUSREW## ;SEE IF STILL REWINDING
TDNN T2,TUBSTS(U) ;...
JRST NOREW ;NO MORE
;AVOID STACK OVERFLOWS BY INSURING THAT IF TAPCNT ENDS UP CALLING THRU
;AND BACK TO CKREW WE WILL BE ON THE CORRECT CPU NEXT TIME.
IFN FTMP,<PUSHJ P,TAPCPU##> ;MAKE SURE WE STAY ON THE RIGHT CPU
PUSHJ P,TAPHLD## ;DON'T USE US WHILE SLEEPING
MOVEI T1,2 ;SLEEP 2 SEC
PUSHJ P,TSLEEP ;ZZZZ
PUSHJ P,TAPCNT## ;OK - START LOOKING AGAIN
JRST CKREW1 ;CHECK SOME MORE
;HERE WHEN NOT REWINDING
NOREW: POP P,TDVIOR(F) ;RESTORE WORLD
POPJ P, ;RETURN
;HERE ON STATUS INTERUPT
CKREWD: MOVE T1,J ;JOB #
PUSHJ P,EWAKE## ;WAKE IT
MOVE S,DEVIOS(F) ;SET UP S
PJRST TPMSTP ;SHUT DOWN CTL
;ROUTINE TO SET UP INTERESTING ACS
;SET UP - U,J
SETACS: MOVE U,TDVUDB(F) ;UDB ADDRESS
;IFN FTTLAB,<
; MOVSI J,TKSSEL ;IF UNIT IS ALREADY GOING...
; TDNN J,TUBSTS(U) ;...DON'T CHANGE TUBCUR
;>;END IFN FTTLAB
; MOVEM F,TUBCUR(U) ;LINK UDB TO CURRENT DDB
LDB J,PJOBN## ;GET JOB OWNING DDB
POPJ P, ;AND RETURN
;SPECIAL ROUTINE USED BY NON-IO REQUESTS
PIOSET: PUSHJ P,SETACS ;SET UP ACS
MOVE S,DEVIOS(F)
JUMPE J,CPOPJ## ;EXIT NOW IF NOBODY THERE
JRST IOSET0 ;CONTINUE OPERATION
;ROUTINE TO SLEEP,RESTORE S
TSLEE1::MOVEI T1,1 ;SLEEP 1 SEC
TSLEEP: MOVE J,.CPJOB## ;SET UP J FOR SLEEP
IFN FTPSCD,<
AOS %MTASL## ;COUNT MTA GENERATED SLEEP
>;END IFN FTPSCD
TSLEE2: PUSHJ P,SLEEPF## ;SLEEP ZEROES F
MOVE S,DEVIOS(F) ;NEW UNIT STATE
POPJ P,
;SETUP ROUTINES FOR INPUT AND OUTPUT
INSET: TLZA S,IO
OUTSET: TLO S,IO
IOSET: PUSHJ P,SETACS ;GET GOOD THINGS
JUMPE J,CPOPJ## ;RETURN IF NO OWNER
IFN FTTLAB,<
PUSHJ P,LBLSLP ;WAIT FOR LABEL PROCESS TO FINISH
PUSHJ P,LBLCKS ;DETERMINE IF PROCESSING NEEDED
JFCL ;IGNORE THIS RETURN
> ;END IFN FTTLAB
PUSHJ P,TAPACC## ;TRY TO FIND AN ONLINE KONTROLLER
JFCL ;...
MOVSI T1,TKSOFL## ;IF KONTROLLER ISN'T OK
TLZE S,OFFLIN ;OFFLINE IN DEVIOS?
TDNN T1,TUBSTS(U) ;OFFLINE IN TUBSTS?
TDNE T1,TKBSTS(W) ;NO. KONT. OFFLINE?
JRST SETOFL ;YES. INDICATE IT
IFN FTTLAB,<
MOVEI T1,FINP!LBLNED ;ASSUME INPUT
TLNE S,IO ;IS IT?
MOVEI T1,FOUT!LBLNED ;NO, CHECK OUTPUT
TLNE S,(T1) ;PROCESSING NEEDED?
JRST SETLBL ;YES, INVOKE LBL PCS
> ;END IFN FTTLAB
IOSET0: TLZ S,OFLUNH ;CLR THIS
PUSHJ P,GTMODE ;GET THE RIGHT MODE
CAILE T1,RB.M7T ;"REAL" MODE?
MOVEI T1,RB.MBY ;NO, INDUSTRY COMPAT. SET UP FOR CORE-DUMP
DPB T1,TDYMOD ;PUT IT BACK
CAIE T1,RB.M7T ;SEE IF 7 TRACK
JRST IOSET2 ;NO - DON'T PLAY WITH PARITY
MOVSI T1,D.EPAR ;GET BIT
ANDCAM T1,TDVSTS(F)
TRNE S,IOPAR ;WANT EVEN OR ODD PARITY?
IORM T1,TDVSTS(F)
IOSET2: PJRST STOIOS## ;STORE S AND RETURN
;ROUTINE TO GET THE RIGHT MODE FOR A TAPE
;RETURNS T1=MODE
GTMODE: LDB T1,TDYMOD ;SEE IF WE HAVE A MODE
JUMPN T1,CPOPJ## ;JUMP IF MODE SET
LDB T1,TDYMD1 ;NONE FROM TAPE. SET FORMAT BEEN ISSUED?
JUMPN T1,CPOPJ## ;GO IF IT HAS
MOVEI T1,RB.MCD ;DEFAULT TO 4.5 BYTE MODE
LDB T2,PIOMOD## ;GET MODE
CAIN T2,BYTMOD ;BYTE MODE?
MOVEI T1,RB.MBY ;YES
MOVEI T2,TUC7TK## ;UNLESS 7 TRACK
TDNE T2,TUBCNF(U) ;??
MOVEI T1,RB.M7T ;THEN USE 7-TRACK MODE
POPJ P,
;HANDLE OFF LINE MESSAGES AND CLEAR ERRORS FOR RE-TRY
;ALSO CHECK FOR TC10C SPECIAL ACTION
SETOFL: PUSHJ P,CKTC10 ;TC10C CROCK!!!
PUSHJ P,HNGSTP## ;OUTPUT MESSAGE
PJRST IOSET ;RESET ACS AND RETURN
;TC10C CONTROLLER SPECIAL ACTION FOR OFF-LINE AT BOT
CKTC10: LDB T1,TUYKTP## ;GET KONTROLLER TYPE
CAIN T1,K.TC1 ;IS IT ONE OF THOSE?
TLCE S,OFLUNH ;BEEN HERE BEFORE?
JRST STOIOS## ;YES, SAY OFF-LINE
MOVEM S,DEVIOS(F) ;REMEMBER FIRST TRY
PUSHJ P,TSLEE1 ;SLEEP FOR 1 SEC
JRST CPOPJ1## ;TRY AGAIN - IT MIGHT BE BACK
IFN FTTLAB,<
;ROUTINE TO CHECK TAPE LABEL STATUS AND FIRST OPERATION
;SKIP RETURN IF NO PROCESSING TO BE DONE
LBLCHK: TLZE S,IOBEG ;CHECK FOR FIRST I/O
TLO S,FSTOP ;AND SET THIS ONE
LBLCKM: PUSH P,T1 ;SAVE T1
PUSH P,F ;SAVE F
TLZ F,-1-MXSECN ;CLEAR POSSIBLE JUNK
CAME F,TUBDDL(U) ;LABEL DDB OURS?
SKIPN %SITLP## ;AND IS THE LABELER ALIVE?
JRST LBLCK2 ;NO PROCESSING
LDB T1,TUYLTP ;GET LABEL TYPE
JUMPE T1,LBLCK2 ;IF NO LABELS, CLEAR SOME FLAGS
TDZ S,[IOSTBL!LBLEOF!LBLSTP,,IODEND] ;DON'T LET SEE EOF OR TROUBLE
PUSHJ P,STOIOS## ;STORE S
POP P,F ;RESTORE F
JRST TPOPJ## ;RESTORE T1
LBLCK2: TLZ S,LBLNED!FSTOP ;ELSE CLEAR THESE FLAGS
MOVEM S,DEVIOS(F) ;...
POP P,F ;RESTORE F
JRST TPOPJ1## ;SKIP RETURN
> ;END IFN FTTLAB
IFN FTTLAB,<
;ROUTINE TO INVOKE LABELING PROCESS AND SUSPEND JOB
LBLMSG: PUSHJ P,SAVE3## ;SAVE P1-P3
MOVEI T1,MT.WAT ;GET CODE FOR WAIT
PUSHJ P,MTAP ;WAIT FOR THINGS TO DIE DOWN
PUSHJ P,TAPHLD## ;SUSPEND UNIT FOR NOW
TLZ S,LBLNED ;CLEAR THIS NOW
TLO S,LBLWAT ;WE ARE NOW WAITING FOR COMPLETION
MOVEM S,DEVIOS(F)
PUSH P,W ;SAVE W
PUSHJ P,LBLSND ;INFORM LBL PCS
POP P,W ;RESTORE W
SETZ T1, ;CLEAR
DPB T1,TUYINF ;MSG INFO
DPB T1,TUYRQT ;AND REQUEST TYPE
PUSHJ P,LBLSLP ;WAIT FOR LABEL PROCESS
LDB T1,PDVESE## ;GET TERMINATION CODE
SKIPGE LBLETB(T1) ;LEGAL TO SET?
POPJ P, ;NO
TDO S,LBLETB(T1) ;GET ERROR BITS FROM TABLE
PJRST STOIOS## ;STORE S AND RETURN
;ROUTINE TO SEND ABORT MSG
LBLABO::MOVEI T1,LR.ABO ;GET ABORT CODE
DPB T1,TUYRQT ;SET REQUEST TYPE
PJRST LBLSND ;SEN MESSAGE OFF
;ROUTINE TO SEND IPCF MSG TO LBL PROCESS
LBLSND: MOVE T1,DEVNAM(F) ;YES - BUILD MSG
MOVEM T1,TUBPHY(U) ;STORE DEVICE NAME
LDB J,PJOBN## ;RESET J INCASE IT HAS CHANGED
DPB J,TUYJBN ;STORE JOB #
MOVE T1,[TLMSIZ,,.IPCTL##] ;LENGTH,,MESSAGE TYPE
MOVEM T1,TUBMSG(U) ;STORE
IFE FTXMON,<MOVEI T2,TUBMSG(U)> ;ADDRESS OF MESSAGE
IFN FTXMON,<
LBLSN1: MOVEI T2,TLMSIZ ;LENGTH OF MESSAGE
PUSHJ P,GETWDS## ;GET CORE
SKIPA ;NONE AVAILABLE
JRST LBLSN2 ;ONWARD
PUSHJ P,TSLEE1 ;ZZZZZZ
JRST LBLSL1 ;TRY AGAIN
LBLSN2: PUSH P,T1 ;SAVE ADDRESS
MOVEI T1,TLMSIZ ;LENGTH IN WORDS
XMOVEI T2,TUBMSG(U) ;STATIC STORAGE
MOVE T3,(P) ;IPCF MESSAGE
EXTEND T1,[XBLT] ;COPY
MOVE T2,(P) ;ADDRESS OF MESSAGE
> ;END IFN FTXMON
MOVEI T1,%SITLP## ;PID
HLL T2,TUBMSG(U) ;MESSAGE MSGE
PUSHJ P,SENDSI## ;TRANSMIT MESSAGE
JFCL ;IGNORE ERRORS
IFN FTXMON,<
MOVEI T1,TLMSIZ ;MESSAGE LENGTH
POP P,T2 ;MESSAGE ADDRESS
PUSHJ P,GIVWDS## ;RELEASE CORE
> ;END IFN FTXMON
POPJ P, ;RETURN
;ROUTINE TO FIX UP S AS IF LABEL PROCESSING HAPPENED
LBLCKS: PUSHJ P,LBLCHK ;FIRST CALL LABEL CHECK
POPJ P, ;NEED LABELLING, DO NOTHING
TLZN S,LBLEOF ;HERE FOR EOF?
JRST CPOPJ1## ;NO, JUST RETURN
TLZ S,IOSTBL ;CLEAR TROUBLE
TDO S,[LBLSTP,,IODEND] ;STOP ON LBL ERR
MOVEM S,DEVIOS(F) ;STORE STATUS
JRST CPOPJ1## ;RETURN
;ROUTINE TO WAIT FOR LABEL PROCESS TO FINISH
LBLSLP: PUSH P,T1 ;SAVE T1
LBLSL1: TLNN S,LBLWAT ;STILL WAITING?
JRST TPOPJ## ;NO, RETURN
MOVEI T1,EV.LBL ;EW CODE FOR LABELS
PUSHJ P,MSLEEP ;GO AWAY
JRST LBLSL1 ;CHECK IF REALLY DONE
;;; STILL IN FTTLAB CONDITIONAL
;ENTER HERE FROM IOSET IF LABEL PROCESSING NEEDED
SETLBL: TLNN S,FSTOP ;FIRST OPERATION?
JRST STLBL1 ;NO - PROCEED
MOVEI T1,LR.FIN ;ASSUME FIRST INPUT
TLNE S,IO ;IS IT REALLY?
SKIPA T1,[LR.FOU] ;NO, FIRST OUTPUT THEN
TLZA S,FINP ;CLEAR FIRST INPUT
TLZ S,FOUT ;CLEAR FIRST OUTPUT
DPB T1,TUYRQT ;SET REQUEST TYPE
MOVEM S,DEVIOS(F)
STLBL1: PUSHJ P,LBLMSG ;INFORM LBL PCS
TLNN S,LBLSTP ;LABELING ERROR?
JRST IOSET ;NO--PROCEED
POPJ P, ;ELSE RETURN UP A LEVEL
;ROUTINE TO CHECK FOR LABEL PCS HNDLING POSITION REQUESTS
LBLPOS: MOVE U,TDVUDB(F) ;SET UP U
DPB T1,TUYINF ;SET UP MTAPE CODE
MOVE S,DEVIOS(F) ;SET UP STATUS
PUSHJ P,LBLCKM ;NEED LABELING?
SKIPA T1,[LR.POS] ;YES - SET POSITION REQ.
JRST CPOPJ1## ;NO - PROCEED
DPB T1,TUYRQT ;SET REQUEST TYPE
PUSHJ P,LBLMSG ;XMIT MSG
TLZ S,LBLSTP ;NEVER NEED THIS BIT ON POSITIONING
LDB T1,PDVESE## ;GET TERMINATION CODE
CAIN T1,LE.CON ;DID HE DO ANYTHING?
AOS (P) ;NO - SKIP RETURN
PJRST STOIOS## ;STORE S AND RETURN
; TABLE TO TRANSLATE LABEL TERM CODE INTO BITS IN IOS
; THE CODE DEPENDS ON THE SIGN BIT **NEVER** BEING USED
LBLETB: -1 ;0 - ILLEGAL
0 ;1 - CONTINUE POSITIONING
LBLSTP!FSTOP!IOEND,,IODEND ;2 - RETURN EOF + CALL LABEL PCS ON NEXT I/O
FSTOP!LBLSTP,,IOERRS ;3 - LABEL TYPE ERROR
FSTOP!LBLSTP,,IOERRS ;4 - HEADER LABEL ERROR
FSTOP!LBLSTP,,IOERRS ;5 - TRAILER LABER ERROR
FSTOP!LBLSTP,,IOERRS ;6 - VOLUME LABEL ERROR
FSTOP!LBLSTP,,IODERR ;7 - DEVICE ERROR
FSTOP!LBLSTP,,IODTER ;10 - DATA ERROR
FSTOP!LBLSTP,,IOERRS ;11 - WRITE LOCKED
FSTOP!LBLSTP,,IOERRS ;12 - POSITIONING ERROR
FSTOP,,IOBOT ;13 - BEGINNING OF TAPE
FSTOP!LBLSTP,,IOERRS ;14 - ILLEGAL OPERATION
FSTOP!LBLSTP,,IOERRS ;15 - FILE NOT FOUND
FSTOP!LBLSTP,,IOERRS ;16 - OPR CANCELED VOLUME SWITCH
FSTOP!LBLSTP,,IOERRS ;17 - TOO MANY VOLUMES IN VOLUME SET
-1 ;20 - ILLEGAL FOR MAGTAPES
-1 ;21 - ILLEGAL FOR MAGTAPES
-1 ;22 - ILLEGAL FOR MAGTAPES
FSTOP!LBLSTP,,IOERRS ;23 - LABELER REQUEST ABORTED BY RESET UUO
FSTOP!LBLSTP,,IOERRS ;24 - VOLUME PROTECTION FAILURE
FSTOP!LBLSTP,,IOERRS ;25 - FILE PROTECTION FAILURE
FSTOP!LBLSTP,,IOERRS ;26 - UNEXPIRED FILE
-1 ;27 - ILLEGAL FOR MAGTAPES
IFN <IOMAX%-<.-LBLETB-1>>,<PRINTX ? LABEL ERROR TRANSLATION TABLE SKEW>
> ;END IFN FTTLAB
;ROUTINE TO GET CURRENT DENSITY SETTING
;RETURN DENSITY ARG IN T1
GETDEN: LDB T1,PDENS ;SEE IF CHANGED BY SETSTS
JUMPN T1,CPOPJ## ;IF YES - USE IT
LDB T1,TDYDN1 ;SEE IF CHANGED BY SET DENSITY
JUMPN T1,CPOPJ## ;IF YES, TRY IT
LDB T1,TDYDEN ;NOT CHANGED, CHECK FOR ACTUAL
JUMPN T1,CPOPJ## ;IE WAS, USE IT
GETDN1: MOVEI T1,STDENS## ;ELSE USE STANDARD
MOVE T2,TUBCNF(U) ;PICK UP CONFIGURATION WORD
PUSH P,T1 ;SAVE THE DENSITY FOR A MOMENT
GETDN2: TDNE T2,DENBIT(T1) ;THIS DENSITY OK?
JRST GETDN4 ;YES
SOJG T1,GETDN2 ;NO, TRY A LOWER ONE
MOVE T1,(P) ;NO LOWER ONES ARE ANY GOOD, TRY HIGHER ONES
GETDN3: TDNN T2,DENBIT(T1) ;THIS DENSITY OK?
AOJA T1,GETDN3 ;NO, TRY A HIGHER ONE
GETDN4: POP P,(P) ;GET RID OF ORIGINAL DENSITY
DPB T1,TDYDN1 ;SAVE DEFAULT DENSITY
POPJ P, ;AND RETURN
DENBIT=.-1 ;SAVE A WORD
TUCD20##
TUCD55##
TUCD80##
TUCD16##
TUCD62##
;ROUTINE CALLED TO SWEEP CACHE UNLESS DEVICE IS A TM10A
;DESTROYS T1
TPMSWP: MOVEI T1,DEPEVM ;DOES THIS DEVICE NEED
TDNN T1,DEVTYP(F) ; EVM (TM10A IF SO)
POPJ P, ;YES, DONT SWEEP
IFN FTKL10,<
PUSHJ P,SAVE3## ;SAVE SOME ACS
MOVSI P1,-MXPORT ;AOBJN POINTER
XMOVEI P2,UDBKDB(U) ;POINT TO START OF KONTROLLER TABLE
SETZ P3, ;CLEAR A COUNTER
TPMSW1: SKIPN T1,(P2) ;GET A KDB ADDRESS
JRST TPMSW2 ;NONE THERE
AOS P3 ;COUNT THE KDB
MOVE T1,KDBCHN(T1) ;GET CHANNEL DATA BLOCK ADDRESS
MOVE T1,CHNTYP(T1) ;AND ASSOCIATED CHANNEL BITS
TLNN T1,CP.RH2 ;EXTERNAL CHANNEL?
JRST TPMSW3 ;YES, MUST SWEEP
TPMSW2: AOS P2 ;ADVANCE TABLE POINTER
AOBJN P1,TPMSW1 ;LOOP FOR ALL KDBS
SOJLE P3,CPOPJ## ;NO CACHE SWEEP IF ONLY ONE PATH
> ;END IFN FTKL10
TPMSW3: PUSHJ P,CSDMP## ;WE MUST SWEEP THE CACHE
IFN FTMP,<MOVMS .CPTAP##> ;TELL ONCE-A-TICK IT DOESNT HAVE TO SWEEP
POPJ P, ;RETURN
;ROUTINE TO DO UUO-LEVEL DRIVE ACCESSIBILITY CHECKING
TPMACC::PUSH P,T1 ;SAVE T1
IFN FTMP,<
LDB T1,DEYPCL## ;CHECK FOR QUEUED PROTOCOL
SKIPN T1 ;IF NOT ENABLED,
PUSHJ P,TAPCPU## ;GET ON THE RIGHT CPU NOW
> ;END IFN FTMP
TPMAC1: PUSHJ P,TAPACC## ;FIND CPU-KDB-UDB PATH
TDZA T1,T1 ;CAN'T GET TO DRIVE??
IFE FTMP,<JRST TPMAC3> ;GO SET ACTIVE KDB
IFN FTMP,<
MOVE T1,KDBCAM(W) ;GET ACCESSIBILITY MASK FOR KONTROLLER
TDNE T1,.CPBIT## ;ON OUR CPU?
JRST TPMAC2 ;YES
MOVSI T1,TUSREW## ;BIT TO TEST
TDNN T1,TUBSTS(U) ;WAITING FOR REWIND COMPLETION?
JRST TPOPJ## ;NO, INITIATE QUEUED PROTOCOL I/O
> ;END IFN FTMP
PUSHJ P,CKREW ;WAIT FOR REWIND TO FINISH
JRST TPMAC1 ;CHECK AGAIN
IFN FTMP,<
TPMAC2: MOVE T1,.CPCPN## ;GET OUR CPU NUMBER
PUSHJ P,ONCPUN## ;MAKE SURE WE STAY THERE
> ;END IFN FTMP
TPMAC3: MOVEM W,TUBAKA(U) ;SET ACTIVE KDB
JRST TPOPJ1## ;RETURN AND START I/O
;SETUP S AND TRANSLATE ERROR BITS FOUND IN IORB
;NON-SKIP RETURN IF ERROR ENCOUNTERED
;SKIP RETURN IF ALL OK - MAYBE EXCEPTION
SETIOS: MOVE S,DEVIOS(F) ;GET STATUS
HLRZ T1,TRBSTS(P1) ;GET IORB STATUS
IFN FTTLAB,< TDZ S,[LBLNED!FSTOP!IOEND!IOSTBL!LBLEOF!LBLSTP,,IOBOT!IOTEND!IODEND]>
IFE FTTLAB,< TDZ S,[IOEND!IOSTBL,,IOBOT!IOTEND!IODEND]>
;CLEAR ALL RELATED BITS
SKIPL TRBFNC(P1) ;ANY EXCEPTIONS?
JRST SETIOX ;NO - JUST STORE AND EXIT
TRNE T1,RB.SOL ;CHECK OFF-LINE
PJRST STOIOS## ;STORE S AND RETURN
TRNE T1,RB.STM ;TAPE MARK SEEN
IFN FTTLAB,< TDO S,[LBLNED,,IODEND]> ;YES - SAY EOF
IFE FTTLAB,< TRO S,IODEND> ;YES - SET EOF
TRNE T1,RB.SBT ;BOT SEEN
TRO S,IOBOT ;MARK IT
TRNE T1,RB.SET ;TAPE INDICATE
TRO S,IOTEND ;SET EOT
IFN FTTLAB,<
LDB T2,PDVESE## ;ANY LABELLING ERROR
SKIPL LBLETB(T2) ;LEGAL TO SET?
TDO S,LBLETB(T2) ;YES
LDB T2,TUYLTP ;GET LABEL TYPE
SKIPE %SITLP## ;IS THERE A TAPE LABEL PROCESS?
SKIPN T2 ;BYPASS?
TLZ S,LBLNED ;YES - CLEAR BIT
TLNN S,LBLNED
TRNE T1,RB.SED!RB.SDE!RB.STL!RB.SLK!RB.SIL ;NON-SKIP IF ERRORS OR
SKIPA ;NEED LABEL ACTION
> ;END IFN FTTLAB
IFE FTTLAB,<
TRNN T1,RB.SED!RB.SDE!RB.STL!RB.SLK!RB.SIL ;NON-SKIP IF ERRORS
>
SETIOX:
IFE FTMP,<AOS (P)> ;INDICATE GOODNESS
IFN FTMP,<
AOSA (P) ;INDICATE GOODNESS
PJRST STOIOS## ;STORE S AND RETURN
LDB T1,PIOMOD## ;IF BUFFERED MODE
CAIGE T1,SD
TRNN S,IODEND ; IF NOT EOF
CAIA
POPJ P, ;EOF - DON'T STORE IODEND IN DDB
> ;END IFN FTMP
PJRST STOIOS## ;STORE S AND RETURN
;ROUTINE TO GENERATE I/O XFER LIST FROM IOWD
;CALL: MOVE T2,IOWD
; MOVE T4,NUMBER OF BYTES
; PUSHJ P,MAKLST
; ... RETURN HERE IF NO ROOM
; RETURN HERE IF OK
MAKLST: PUSHJ P,SAVE4## ;SAVE WORLD
MOVE P1,T2 ;COPY UNRELOCATED IOWD
PUSHJ P,SVEUF## ;MAKE JOB ADDRESSABLE
PUSHJ P,SPCS## ;ANS SETUP PCS
MOVEM P1,TRBRCT(T1) ;SAVE NUMBER OF WORDS, UVA IN IORB (FOR TM2KON/TD2KON)
LDB P4,PRBMOD## ;GET MODE
MOVE P4,TMODTB##(P4) ;CHARS/WD TABLE (4,5,6)
LDB T3,PBUFRM ;MAX FRAME COUNT USER GAVE
JUMPE T3, MAKLS0 ;USER SPECIFY MAX FC?
SKIPE T4 ;YES, T4=0 FOR CORE DUMP
CAMG T3,T4 ;T4 NON-ZERO MEANS BYTE MODE
MOVE T4,T3 ;USE MAX FRAME COUNT
MAKLS0: MOVE T3,T4
HRL P4,T3 ;IN LH (P4)
MOVNS T3
SKIPE T3 ;IF BYTE MODE, SAVE
HRLZM T3,TRBRCT(T1) ;-BYTE COUNT,,UVA FOR TM2KON/TD2KON
MOVEI T1,DEPDER ;ERROR RETRY ENABLED?
TDNN T1,DEVSTA(F)
TDNE S,[MTSNAR,,IONRCK]
TLOA S,IOSRTY ;NO, DON'T LET DX10 RETRY
TLZ S,IOSRTY ;YES, TELL DX TO RETRY
MOVE P3,KDBCHN(W) ;ADDRS OF CHNCB
HRRZ T1,TUBQUE(U) ; RESTORE LOC OF IORB
IFN FTKS10,<
LDB P1,PRBFCN## ;GET FUNCTION
CAIN P1,RB.FRB ;READ BACKWARDS?
SETOM CHNRRV(P3) ;YES -- SET READ REVERSE FLAG
TLO P3,400000 ;FLAG TO FORCE MAPIO TO STORE EXPECTED FINAL BUS ADDRESS
MOVEI P1,0 ;INITIAL CALL TO MAPIO
PUSHJ P,MAPIO## ;SET UP UNIBUS ADAPTER REGISTERS
CAIA ;WE LOST SOMEHOW!!
AOS (P) ;SET FOR SKIP RETURN
SETZM CHNRRV(P3) ;CLEAR READ REVERSE FLAG
POPJ P, ;RETURN
>;END IFN FTKS10
IFE FTKS10,<
MOVEI P2,DEPEVM
TDNN P2,DEVTYP(F) ;SKIP IF OTHER THAN TM10A
JRST MAKLS1 ;TRY KA10 STYLE
MOVEI P1,0 ;INIT CALL TO MAPIOW
PUSHJ P,MAPIO## ;MASSAGE IOWD
PJRST MAKLSE ;NO FREE SPACE - RELEASE ANY PARTIAL IOWD LIST
IFN FTKL10,<
;MAKE MULTI-IOWD LIST IF TU70
MOVEI T4,1 ;AT LEAST ONE RECORD WILL BE DONE
MOVEM T4,TKBCNT(W)
IFN FTMP,<
TLNN S,IO ;OUTPUT?
JRST MAKL0A
PUSH P,T1 ;YES, FIND OUT HOW MANY BUFS WE CAN DO
PUSHJ P,CHKNB##
POP P,T1
MOVSI T4,-1 ;DECREMENT NUMBER OF BUFS SWEPT FOR
ADDB T4,DEVNBF(F)
TLNE T4,-1 ;DONE IF NO MORE AVAILABLE
> ;END IFN FTMP
MAKL0A: TRNE S,IOCON ;DISCONTINUOUS MODE?
JRST CHNDON ;YES, DONE
MOVE T4,KDBDSP(W) ;DRIVER DISPATCH
SKIPN TUBCNI(U) ;NO ERRORS DETECTED ON LAST XFER?
SKIPN TPKCCF(T4) ; AND DEVICE SUPPORT COMMAND CHAINING?
JRST CHNDON ;NO, ONLY DO 1 RECORD
LDB T4,PRBFCN## ;YES, IS IT BUFFERRED MODE,
LDB T3,PIOMOD## ; AND NOT READ-BACKWARD?
CAIE T4,RB.FRB
CAIL T3,SD
JRST CHNDON ;NO, ONLY 1 RECORD
TLNE S,IO ;READING?
JRST MAKL0B
HRROI T2,-1(T2) ;YES, SET UP TO ASK DX10 TO STORE WRDCNT
PUSHJ P,MAPIO##
JRST MAKL0B
MOVE T4,KDBDSP(W) ;NOW THAT WE HAVE A "REAL" IOWD
PUSHJ P,@TPKCMD(T4) ; ASK TX1KON TO MASSAGE IT INTO WHAT DX10 WANTS
JFCL ;ALWAYS COMES BACK NON-SKIP
MAKL0B: HRRZ T4,DEVIAD(F) ;YES, GET BUFFER LOC
TLNE S,IO
HRRZ T4,DEVOAD(F)
MOVE T3,T4 ;START AT THAT BUFFERS SUCCESSOR
HRL P2,T1 ;SAVE LOC OF IORB IN P2 (FOR TPKCMD)
;STILL IN FTKL10 CONDITIONAL
;NOTE RACE CONDITION:
;MAPIO GETS NO ROOM TO INSERT WRDCNT READER, BUT IO LIST SPACE IS
;FREED UP BEFORE NEXT CALL TO MAPIO
CHNLS1: EXCTUX <HRRZ T1,(T3)> ;STEP TO NEXT BUF
CAIN T4,(T1) ;BACK WHERE WE STARTED?
JRST CHNDN1 ;YES, DONE
PUSHJ P,IADRCK## ;WORD 0 OF BUFFER THERE?
JRST CHNDN1 ;NO, DONE
JRST CHNDN1 ;DONE
EXCTUX <HLL T1,(T1)> ;YES, GET LH OF THE BUFFER
TLNN S,IO ;IF READING,
JUMPL T1,CHNDON ; DONE IF THE USE BIT IS ON
TLNE S,IO ;IF WRITING,
JUMPGE T1,CHNDON ;DONE IF THE USE BIT IS OFF
MOVE T2,KDBDSP(W) ;WE HAVE A RECORD TO WRITE
PUSHJ P,@TPKCMD(T2) ;GO SET UP THE DEVICE-COMMAND
JRST CHNDON ;NO ROOM FOR IT IN FREE CORE
TLNE S,IO ;READING?
JRST CHNLS2 ;NO
LDB T2,[POINT 17,T1,17] ;YES, GET MAX SIZE OF BUFFER
MOVNI T2,-1(T2) ;-SIZE
JUMPGE T2,CHNLSX ;DONE IF SIZE WRONG
JRST CHNLS4 ;OK, CONTINUE
CHNLS2: MOVEI T1,1(T1) ;POINT TO WORD COUNT WORD
PUSHJ P,IADRCK## ;CHECK IT OUT
JRST CHNDN1 ;ILLEGAL ADDRESS
JRST CHNDN1 ;ILLEGAL FOR I/O
MOVEI T1,-1(T1) ;RESTORE T1
EXCTUX <MOVN T2,1(T1)>;WRITING, GET USERS WRDCNT
JUMPE T2,CHNLSX ;DONE IF 0
LDB T3,PIOMOD## ;BYTE MODE?
CAIE T3,BYTMOD
JRST CHNLS4
PUSH P,T1 ;YES. GET MODE OF REQUEST
HRRE T1,TUBQUE(U)
LDB T3,PRBMOD##
MOVNS T2 ;+BYTE COUNT
LDB T1,PBUFRM ;MAX USER SPECIFIED VIA TAPOP
JUMPE T1,CHNLS3
CAMGE T1,T2 ;IF MORE BYTES THAN MAX
MOVE T2,T1 ;USE MAX NUMBER HE ASKED FOR
CHNLS3: POP P,T1
HRL P4,T2 ;SET LH(P4)=BYTE COUNT FOR MAPIO
IDIV T2,TMODTB##(T3) ;NUMBER OF WORDS
SKIPE T3
ADDI T2,1
MOVNS T2 ;T2=-NUMBER OF WORDS
CHNLS4: HRRZS T3,T1 ;SAVE START ADR
HRL T3,T2 ; AND WORDCOUNT
MOVEI T1,-1(T1) ;MAKE SURE ENTIRE BUFFER, PLUS S-WORD
MOVNS T2 ; IS IN CORE
ADDI T2,2(T1) ;TOP OF BUFFER
PUSHJ P,ZRNGE## ;ALL THERE?
JRST CHNLSX ;NO, FORGET ABOUT THIS BUFFER
IFN FTMP,<
PUSHJ P,[TLNE S,IO ;INPUT?
JRST CPOPJ1##;WRITING, BUF IS OK
PUSHJ P,SAVT##
HRRZ T1,T3 ;IS BUF OK WRT CACHE?
PJRST BUFSSN##]
JRST CHNLSX ;NO, DON'T DO BUF
> ;END IFN FTMP
AOS T2,T3 ;IOWD TO T2, POINT AT DATA-1
PUSH P,P1 ;SAVE CURRENT END
PUSH P,P2 ;SAVE P2 (LH=LOC OF IORB)
PUSHJ P,MAPIO## ;GO MAP IT
JRST CHNPNT ;NOT ENOUGH FREE CORE
TLNE S,IO ;READING?
JRST MAKLS5
HRROI T2,-1(T2) ;YES
PUSHJ P,MAPIO## ;MAKE LIST ENTRY FOR BYTE COUNT
JRST CHNPNT ;NO ROOM
PUSH P,T1 ;SAVE T1
MOVE T1,KDBDSP(W) ;DRIVER DISPATCH
PUSHJ P,@TPKCMD(T1) ;SETUP COMMAND CHAINING
JFCL ;ALWAYS COMES BACK NON-SKIP
POP P,T1 ;RESTORE T1
MAKLS5: POP P,P2 ;RESTORE LOC OF IORB
POP P,(P) ;DISCARD PREVIOUS END
AOS TKBCNT(W) ;ONE MORE RECORD IN THIS XFER
IFN FTMP,<
MOVSI T2,-1 ;DECREMENT NO OF BUFFERS SWEPT FOR
TLNE S,IO
ADDB T2,DEVNBF(F) ; IF OUTPUT
TLNN T2,-1 ;ANY MORE AVAILABLE?
JRST CHNDN1 ;NO, WE'RE THROUGH
> ;END IFN FTMP
SOJA T3,CHNLS1 ;GO TEST NEXT BUFFER
;STILL IN FTKL10 CONDITIONAL
;HERE WHEN MAPIO RAN OUT OF ROOM
CHNPNT: POP P,P2
SETZM (P1) ;SO RTNIOW WILL KNOW WHEN TO STOP
POP P,P1 ;RESTORE LOC OF LAST DEVICE COMMAND
;HERE ON BAD WRDCNT, THE DEVICE COMMAND IS ALREADY IN THE LIST
CHNLSX: SUBI P1,1 ;BACK UP OVER DEVICE COMMAND
SETZM (P1) ;CLEAR IT
CHNDON:
CHNDN1:
>;END FTKL10
MOVE P3,P1 ;SAVE PNTR TO NEXT WORD
MAKLSX:
IFN FTKL10,<MOVE T1,-10(P)> ;GET ADDR OF IORB
IFN FTKS10,<MOVE T1,-6(P)> ;GET ADDR OF IORB
HRRM P2,@IRBACC(T1) ;STORE EVA OF IOLIST
HRLM P3,@IRBACC(T1) ;POINT TO LAST WORD OF XFER LIST
LDB T2,PRBFCN## ;GET FCN
CAIN T2,RB.FRB ;READ BACKWARDS?
JRST INVERT ;YES - INVERT XFER LIST
JRST CPOPJ1## ;NO - RETURN
MAKLS1: PUSH P,T2 ;SAVE IOWD
PUSHJ P,GCH4WD## ;GET BLOCK OF STORAGE
JRST T2POPJ## ;ERROR RETURN
MOVE P2,T1 ;SAVE IN P2
SETZM 3(T1) ;CLEAR LAST WORD
POP P,0(T1) ;STORE IOWD
SETZM 1(T1) ;TERMINATE LIST
MOVEI P3,1(T1) ;ADDRS OF END OF LIST
JRST MAKLSX ;RETURN
;HERE WHEN MAPIO LOST - RETURN ANY PARTIAL STUFF
MAKLSF:
IFN FTKL10,<MOVE P1,-10(P)> ;GET ADDR OF IORB
IFN FTKS10,<MOVE P1,-6(P)> ;GET ADDR OF IORB
HRRZ T1,@IRBACC(P1) ;PARTIAL LIST
PUSHJ P,RTNIOW## ;RETURN IT
MAKLSE: SKIPE T1,P2 ;ANYTHING ALLOCATED
PUSHJ P,RTNIOW## ;YES - RETURN IT
POPJ P, ;GIVE ERROR RETURN
> ;END IFE FTKS10
;HERE TO WAIT FOR A KONTROLLER
KSLEEP: SKIPA T3,[FSLEEP##] ;LIKELY THAT EVENT WILL HAPPEN SOON
;HERE TO GO INTO EVENT WAIT
MSLEEP: MOVEI T3,ESLEEP## ;LONG TIME UNTIL THE EVENT
MOVEI T2,IOACT ;CHECK FOR IOACTIVE
TDNN T2,DEVIOS(F) ;DON'T RETURN EVM IF SO
PUSHJ P,RTEVM## ;RETURN ANY EVM WHICH WE MAY HAVE
; SINCE WE MIGHT GET SWAPPED
; WHILE SLEEPING
MOVSI T2,OFLHNG ;IN KONTROLLER WAIT BIT
IORM T2,DEVIAD(F) ;LITE IT IN CASE OF HUNG DEVICE
PUSHJ P,(T3) ;WAIT FOR EVENT
MOVE S,DEVIOS(F) ;NEW STATE OF UNIT
SKIPL DEVIAD(F) ;HUNG DEVICE WHILE WAITING FOR THE KONTROLLER?
PJRST ERRGOU## ;YES, GET OUT
MOVSI T2,OFLHNG ;NO, NO LONGER WAITING
ANDCAM T2,DEVIAD(F) ; ..
POPJ P,
IFN FTKL10,<
;ROUTINE TO GENERATE XFER LIST FOR READ BACKWARDS
;ENTER WITH P2 := FORWARD XFER LIST
; T1 := IORB ADDRS
; P4 := CHARS/WD
INVERT: PUSH P,U ;WE USE U AS A FLAG TO GETMOR
MOVE U,KDBDSP(W) ;POINT TO KONTROLLER DISPATCH
LDB U,[POINTR (DRVCF2(U),DR.KTY)] ;GET KONTROLLER TYPE
CAIE U,K.T78 ;TM78?
CAIN U,K.DX2 ;OR DX20?
JRST [MOVEI U,4
JRST INVL0]
CAIN U,K.TX1 ;DX10?
TDZA U,U ;SET U=0 FOR DX10, U=4 FOR DX20
;GETMOR USES THIS AS A FLAG FOR WHICH
;KIND OF CCW JUMP WORDS IT BUILD
PJRST UPOPJ1## ;NO, LEAVE THE LIST ALONE
INVL0: MOVEI P3,0 ;INIT CNTR OF IOWDS
MOVE P1,T1 ;IORB ADDRESS
MOVE T2,P2 ;COPY LIST HEAD
INVL1: MOVE T1,0(T2) ;IOWD
JUMPE T1,INVD1 ;DONE IF ZERO
JUMPG T1,[MOVE T2,T1 ;PERFORM XFER
JRST INVL1] ;CONTINUE
ADDI P3,1 ;INCR COUNTER
AOJA T2,INVL1 ;AND LOOK AT NEXT
INVD1: PUSHJ P,GCH4WD## ;GET SOME STORAGE
JRST [POP P,U ;RESTORE U
JRST MAKLSE] ;LOSE
HRRM T1,@IRBACC(P1) ;SAVE THIS LIST ADDRS
MOVE P1,T1 ;COPY TO P1
HRLI P1,-3 ;MAKE AOBJN PNTR
SETZM 0(P1) ;GRNTEE ZERO AT END
INVL2: MOVE T2,P2 ;HEAD OF OLD LIST
MOVE T3,P3 ;ITEM # TO FIND
INVL3: SKIPN T1,0(T2) ;LOOK FOR END
STOPCD MAKLSF,DEBUG,BFO, ;++BETTER FIND ONE
JUMPG T1,[MOVE T2,T1 ;LINK TO NEXT
JRST INVL3] ;AND PROCEED
SOJLE T3,INVD2 ;DONE WHEN T3 GOES TO ZERO
AOJA T2,INVL3 ;LOOK FOR MOVE
INVD2: HLRE T3,T1 ;GET LH
ASH T3,-4 ;ADJUST
JUMPN U,INVD4 ;ALREADY HAVE WORD COUNT IF DX20
MOVNS T3 ;POSITIVE
IDIVI T3,(P4) ;MAKE INTO WORDS
JRST INVD5 ;JUMP AROUND DX20/RH20 CODE
INVD4: ANDI T3,3777 ;RH20 USES 11 BIT POSITIVE WORD COUNT
TLO T1,(CC.REV) ;SET REVERSE BIT IN RH20 CCW
INVD5: ADDI T1,-1(T3) ;ADJUST IOWD TO BUFFER END
MOVEM T1,0(P1) ;STORE IN NEW LIST
SOJLE P3,INVD3 ;DONE IF NO MORE
AOBJN P1,INVL2 ;NO - DO MORE
PUSHJ P,GETMOR## ;NEED MORE STORAGE
JRST [POP P,U ;RESTORE U
PJRST MAKLSF] ;RETURN TRASH AND LOSE
JRST INVL2 ;TRY AGAIN
INVD3: AOBJN P1,.+1 ;POINT TO END OF LIST
SETZM 0(P1) ;GRNTEE ZERO
MOVE T1,-11(P) ;RESTORE IORB
HRLM P1,@IRBACC(T1) ;SAVE NEW LIST END
MOVE T1,P2 ;NOW RETURN OLD LIST
PUSHJ P,RTNIOW##
PJRST UPOPJ1## ;GIVE GOOD RETURN
>;END IFE FTKL10
;ROUTINE TO SET UP CORRECT READ OP
SETRED: MOVEI P2,RB.FRD ;ASSUME NORMAL
MOVE T2,TDVSTS(F) ;GET FLAGS
TLNE T2,D.NRLT ;LOW THRESHOLD?
MOVEI P2,RB.FRL ;YES - SET FCN
TLNE T2,D.RDBK ;READ BACKWARDS?
MOVEI P2,RB.FRB ;YES - USE THIS
POPJ P, ;RETURN
;ROUTINES TO SETUP ASYNCHRONOUS IORB
IFN FTMP,<
PCLOUT: SKIPA T3,[TPMOU1] ;OUTPUT
PCLINP: MOVEI T3,TPMIN1 ;INPUT
MOVSI T2,RB.PCL ;QUEUED PROTOCOL BIT
JRST QUEIOB ;GO QUEUE UP IORB
> ;END IFN FTMP
QUEOUT: SKIPA T3,[TPMOU1] ;OUTPUT
QUEINP: MOVEI T3,TPMIN1 ;INPUT
SETZ T2, ;ASYNCH I/O
QUEIOB:
IFN FTXMON,<XHLLI T3,.> ;INCLUDE SECTION
MOVEM T3,IRBIVA(T1) ;SAVE IN INT VECTOR
PUSH P,T2 ;SAVE IORB BITS
PUSH P,T1 ;SAVE IORB PNTR
PUSHJ P,CKREW ;MAKE SURE NOT REWINDING
PUSHJ P,SETACT## ;MAKE (RAD)IOACTIVE
POP P,T1 ;IORB
POP P,T2 ;IORB BITS
MOVEI T3,DEPAIO ;BIT TO TEST
TDNE T3,DEVAIO(F) ;ASYNCH I/O?
TLO T2,RB.AIO ;YES
IORM T2,TRBFNC(T1) ;...
PJRST TAPRQT## ;QUEUE IORB, SELECT IF IDLE
;PROCESS CONTROL-T
TPMCTT::PUSHJ P,SAVE1## ;SAVE P1
MOVE P1,TDVUDB(F) ;UDB POINTER
PUSHJ P,INLMES##
ASCIZ " file "
MOVE T1,TUBFIL(P1)
PUSHJ P,PRTDIG##
PUSHJ P,INLMES##
ASCIZ " record "
SKIPL T1,TUBREC(P1)
PJRST PRTDIG##
PUSHJ P,INLMES##
ASCIZ " ???"
POPJ P,
SUBTTL TAPSER CALLED ROUTINES
;ROUTINE CALLED BY TAPSER WHEN KONTROLLER IS GRANTED
;W POINTS TO KDB, U POINTS TO UDB, T1 TO IORB
TPMSIO::MOVE F,TUBCUR(U) ;POINTER TO DDB
MOVSI T2,RB.AIO ;CHECK FOR SPECIAL IORBS
TDNE T2,TRBFNC(T1)
JRST TPASIO ;START THESE NOW
PUSH P,T1 ;SAVE IORB PNTR
LDB T1,PJOBN## ;JOB NO. IN T1
JUMPE T1,TPOPJ## ;NO JOB NUM.?
PUSHJ P,EWAKE## ;GET HIM UP
JRST TPOPJ## ;RETURN
;HERE TO START ASYNC I/O REQUEST
TPASIO: PUSHJ P,SVEUF## ;SET UP UPMP
PUSHJ P,SPCS## ;ALSO SETUP PCS
MOVE S,DEVIOS(F) ;SET UP S
;;;; ;FALL INTO TPMDON
;ROUTINE CALLED BY TAPSER WHEN I/O COMPLETE
; U - UDB PNTR , W - KDB PNTR
TPMDON::PUSHJ P,SAVE2## ;SAVE P1,P2
MOVE P1,T1 ;PLACE IORB PNTR IN P1
MOVE F,TUBCUR(U) ;POINTER TO DDB
LDB J,PJOBN## ; J = JOB NUMBER
LDB T2,PRBFCN## ;GET SELECTED FUNCTION
LDB T1,PRBDEN## ;GET SELECTED DENSITY
CAIE T2,RB.FRW ;IF REWIND
CAIN T2,RB.FYB ; OR YELOW BALL,
JRST TPMDO1 ;DON'T UPDATE DENSITY STATUS
DPB T1,TDYDEN ;UPDATE ACTUAL DENSITY
IFN FTTLAB,<
TLO T1,(ST.FAC) ;UPDATE ACTUAL
PUSHJ P,SETODN ;SET IN OTHER GUY, TOO!
> ;END IFN FTTLAB
TPMDO1: SKIPE T1,IRBIVA(P1) ;GET ROUTINE ADDRESS
IFE FTXMON,<JRST (T1)> ;DISPATCH
IFN FTXMON,<XJRST T1> ;DISPATCH
STOPCD .,STOP,NIV, ;++ NULL INT VECTOR ADDRS
;ROUTINE CALLED TO RESET DDB PARAMETERS PECULIAR TO MAGTAPES
;ENTER AT TPMRES FOR A NORMAL RESET OR TPMREA FOR A REASSIGN
TPMRES::TDZA T1,T1 ;NORMAL RESET ENTRY POINT
TPMREA::MOVE T1,%SITLP## ;REASSIGN ENTRY POINT
MOVE T2,DEVMOD(F) ;GET MODE WORD
TLNN T2,DVTTY ;WEED OUT NUL:
TLNN T2,DVMTA ;A MAGTAPE?
POPJ P, ;NO
MOVEI T2,MTSIZ##+1 ;GET DEFAULT MAGTAPE BLOCK SIZE
DPB T2,PBUFSZ ;RESTORE DEFAULT BLOCK SIZE
SETZ T2, ;GET A ZERO
SKIPN T1 ;TAPE LABELER RUNNING?
DPB T2,TDYDEN ;RESET ACTUAL DEN TO SYSTEM DEFAULT
DPB T2,TDYDN1 ;CLEAR USER SET DEFAULT DENSITY
DPB T2,TDYMOD ;FORCE REINIT OF MODE
DPB T2,TDYMD1 ;CLEAR DEFAULT MODE
DPB T2,PBUFRM ;CLEAR MAX FRAME-COUNT
DPB T2,PMTRTY ;ENABLE AUTO ERROR-RETRY
POPJ P, ;RETURN
;ROUTINE CALLED BY DDB SCANNING TO CONVERT SIXBIT /MT/ INTO
;THE APPROPRIATE NAME FOR 7 OR 9-TRACK DEVICES
TPMDVS::CAMN P1,[SIXBIT/MT/] ;SANITY CHECK
POPJ P, ;DON'T MESS WITH NAME
MOVE T3,TDVUDB(F) ;IT'S A MAGTAPE, GET UDB
HRRZ T3,TUBCNF(T3) ;GET CONFIG INFO
TRNN T3,TUC7TK## ;IS THIS 7-TRACK ?
SKIPA T3,[SIXBIT/M9/] ;NO, SETUP 9-TRACK
MOVSI T3,'M7 ' ;YES, SET UP NAME
JRST CPOPJ1## ;RETURN
SUBTTL ERROR LOGGING ROUTINES -- TPELOG - LOG I/O OR POSITIONING ERRORS
TPELOG::JUMPE U,CPOPJ## ;NEED A UDB FOR ERROR LOGGING
PUSHJ P,SAVT## ;SAVE SOME ACS
JUMPN F,TPELO1 ;DDB ALREADY SETUP?
SKIPN F,TUBCUR(U) ;PICK UP CURRENT DDB
MOVE F,UDBDDB(U) ;OR THE "REAL" DDB IF NONE
JUMPE F,TPELO2 ;ASSUME LOGGING WANTED IF NO DDB
TPELO1: MOVEI T2,DEPDEL ;BIT TO TEST
TDNE T2,DEVSTA(F) ;ERROR LOGGING DISABLED?
JRST [AOS DELCNT## ;YES
POPJ P,] ;JUST RETURN
TPELO2: MOVE T2,KDBDSP(W) ;ADDRS OF CTL DEP CODE
PUSHJ P,@TPKELG(T2) ;DO KONTROLLER DEPENDENT ERROR LOGGING
POPJ P, ;FAILED
PUSHJ P,QUESEB## ;QUEUE UP THE BLOCK
POPJ P, ;RETURN
;COMMON ROUTINE CALLED BY MOST DRIVERS
TPELGX::HLLZ T1,ELGTBL+.EXFLG ;GET -VE LENGTH OF XFER TABLE
ADD T1,TUBIEP(U) ;PLUS -VE IEP LENGTH
ADD T1,TUBFEP(U) ;PLUS -VE FEP LENGTH
HLRES T1 ;MOVE TO RH
MOVMS T1 ;MAKE POSITIVE
PUSHJ P,ALCSEB## ;ALLOCATE A SYSTEM ERROR BLOCK
POPJ P, ;NO CORE
LDB T2,PJOBN## ;GET OWNER JOB NUMBER
MOVE T3,JBTPPN##(T2) ;AND ITS PPN
MOVEM T3,TUBUID(U) ;STORE FOR XFER
MOVE T3,JBTNAM##(T2) ;GET PROGRAM NAME
MOVEM T3,TUBPGM(U) ;STORE FOR XFER
MOVE T2,KDBDSP(W) ;POINT TO KONTROLLER DISPATCH
LDB T2,[POINTR (DRVCF2(T2),DR.KTY)] ;GET KONTROLLER TYPE
DPB T2,[POINT 3,TUBTRY(U),14] ;SAVE FOR SYSERR
MOVEM T2,TUBKTY(U) ;STORE FOR XFER
MOVE T2,KDBDVC(W) ;GET DEVICE CODE WORD
MOVEM T2,TUBDVC(U) ;STORE FOR XFER
MOVE T2,KDBCHN(W) ;GET CHANNEL DATA BLOCK
MOVE T2,CHNTYP(T2) ;AND CHANNEL TYPE WORD
SETZ T3, ;CLEAR TEMP
IFN FTKL10,<
TLNE T2,CP.RH2 ;RH20?
TLO T3,(1B11) ;YES
> ;END IFN FTKL10
IFN FTKS10,<
TLNE T2,CP.R11 ;RH11?
TLO T3,(1B10) ;YES
> ;END IFN FTKS10
IORM T3,TUBTRY(U) ;STORE FOR XFER
XMOVEI T2,ELGTBL ;POINT TO TRANSFER TABLE
PUSHJ P,XFRSEB## ;COPY DATA
JFCL ;WON'T FAIL
MOVEI T2,ELGEND-ELGTBL-.EXHDR+.EBHDR-1 ;OFFSET TO IEP STORAGE
HRRM T2,.EBHDR+10(T1) ;FIXUP AOBJN POINTER
HLRE T2,TUBIEP(U) ;GET -VE IEP LENGTH
MOVMS T2 ;MAKE POSITIVE
PUSH P,T2 ;SAVE FOR A MOMENT
HRRZ T3,TUBIEP(U) ;GET OFFSET WITHIN TUB
ADD T3,U ;RELOCATE
HRRZ T4,.EBHDR+10(T1) ;GET OFFSET TO STORAGE
AOS T4 ;PLUS ONE CUZ SYSERR IS WIERD
ADD T4,T1 ;FORM DESTINATION
IFE FTXMON,<
HRLZS T3 ;GET SOURCE IN LH
HRRI T3,(T4) ;AND DESTINATION IN RH
ADDI T4,(T2) ;COMPUTE END OF BLT
BLT T3,-1(T4) ;COPY DATA
> ;END IFE FTXMON
IFN FTXMON,<EXTEND T2,[XBLT]> ;COPY INTO ERROR BLOCK
HRRZ T2,.EBHDR+10(T1) ;GET OFFSET TO START OF IEP DATA
ADD T2,(P) ;PLUS IEP SIZE
HRRM T2,.EBHDR+11(T1) ;FIXUP OFFSET TO START OF FEP DATA
HLRE T2,TUBFEP(U) ;GET -VE FEP LENGTH
MOVMS T2 ;MAKE POSITIVE
HRRZ T3,TUBFEP(U) ;GET OFFSET WITHIN TUB
ADD T3,U ;RELOCATE
HRRZ T4,.EBHDR+11(T1) ;GET OFFSET TO STORAGE
AOS T4 ;PLUS ONE FOR SYSERR
ADD T4,T1 ;FORM DESTINATION
IFE FTXMON,<
HRLZS T3 ;GET SOURCE IN LH
HRRI T3,(T4) ;AND DESTINATION IN RH
ADDI T4,(T2) ;COMPUTE END OF BLT
BLT T3,-1(T4) ;COPY DATA
> ;END IFE FTXMON
IFN FTXMON,<EXTEND T2,[XBLT]> ;COPY INTO ERROR BLOCK
POP P,(P) ;PHASE STACK
JRST CPOPJ1## ;RETURN
ELGTBL: SEBTBL (.ERTAP,ELGEND,)
MOVE UDBNAM(U) ;(R00) DEVICE NAME
MOVE TUBRID(U) ;(R01) REELID
MOVE TUBFIL(U) ;(R02) FILES FROM BOT
MOVE TUBREC(U) ;(R03) RECORDS FROM LAST EOF
MOVE TUBTRY(U) ;(R04) RETRY COUNT + HARD ERROR BIT
MOVE TUBCCR(U) ;(R05) CHARACTERS INTO CURRENT RECORD
MOVE TUBPBE(U) ;(R06) POSITION BEFORE ERROR
MOVE TUBFES(U) ;(R07) FINAL ERROR STATE
MOVE TUBIEP(U) ;(R10) INITIAL ERROR POINTER
MOVE TUBFEP(U) ;(R11) FINAL ERROR POINTER
MOVE TUBUID(U) ;(R12) PPN OF USER
MOVE TUBPGM(U) ;(R13) SIXBIT PROGRAM NAME
MOVE TUBDVC(U) ;(R14) DEVICE CODE/UNIBUS ADDRESS
MOVE TUBKTY(U) ;(R15) KONTROLLER TYPE
ELGEND:! ;END OF TABLE
SUBTTL ERROR LOGGING ROUTINES -- TPEMOV - MOVE DATA WITHIN TUB
TPEMOV::MOVE T4,KDBDSP(W) ;POINT TO KONTROLLER DISPATCH
LDB T4,[POINTR (DRVCF2(T4),DR.KTY)] ;GET KONTROLLER TYPE
TRNN T1,RB.SRE ;LEAVE IEP ALONE IF RECOVERED
CAIN T4,K.DX2 ;IF A DX20, DON'T COPY
JRST TPEMO1 ;SINCE TD2KON DOESN'T USER TUBIEP
IFE FTXMON,<
MOVE T4,TUBIEP(U) ;INITIAL ERROR POINTER
ADDI T4,0(U) ;RELOCATE
HLRE T2,T4 ;-LEN OF AREA
MOVNS T2 ; +LEN
ADDI T2,-1(T4) ;LOC+N-1
HRR T3,TUBFEP(U) ;FINAL ERROR STATUS
ADDI T3,0(U) ;RELOCATE
HRL T4,T3 ; FORM BLT WORD
BLT T4,0(T2) ;MAKE COPY FOR DAEMON
> ;END IFE FTXMON
IFN FTXMON,<
HLRE T2,TUBIEP(U) ;-LENGTH OF AREA
MOVNS T2 ;MAKE POSITIVE
HRRZ T3,TUBFEP(U) ;UDB OFFSET TO FINAL ERROR STATUS
ADD T3,U ;RELOCATE
HRRZ T4,TUBIEP(U) ;UDB OFFSET TO INITIAL ERROR STATUS
ADD T4,U ;RELOCATE
EXTEND T2,[XBLT] ;COPY FOR DAEMON
> ;END IFN FTXMON
TPEMO1: MOVE T2,TUBREC(U) ;POSITION BEFORE LAST REC
SUBI T2,1 ;ASSUME THE TAPE MOVED
HRL T2,TUBFIL(U) ;SAVE POSITION BEFORE ERROR
MOVEM T2,TUBPBE(U) ; IN CASE TAPERP NOT CALLED
MOVE T2,TRBRCT(P1) ;SAVE CHAR COUNT IF REC
MOVEM T2,TUBCCR(U) ; IN TUB FOR DAEMON
LDB T2,PJOBN
MOVE T3,JBTNAM##(T2) ;SAVE PROGRAM NAME
MOVEM T3,TUBPGM(U)
MOVE T3,JBTPPN##(T2) ; AND PPN
MOVEM T3,TUBUID(U) ;FOR DAEMON
POPJ P,
SUBTTL ERROR LOGGING ROUTINES -- TPESTS - LOG TAPE STATISTICS
TPESTS: PUSHJ P,SAVT## ;SAVE SOME ACS
LDB T1,PJOBN## ;GET OWNER JOB NUMBER
MOVE T1,JBTPPN##(T1) ;AND ITS PPN
MOVEM T1,TUBUID(U) ;STORE FOR XFER
SETZ T1, ;LET XFR ROUTINE ALLOCATE
XMOVEI T2,TPSTBL ;POINT TO TRANSFER TABLE
PUSHJ P,XFRSEB## ;COPY DATA
JFCL ;NO CORE
SETZM TUBSTB(U) ;NOW CLEAR AREA
IFE FTXMON,<
HRLI T2,TUBSTB(U) ;GEN CLEAR PNTR
HRRI T2,TUBSTB+1(U)
BLT T2,TUBSTE-1(U) ;END OF AREA TO CLEAR
> ;END IFE FTXMON
IFN FTXMON,<
MOVEI T1,TUBSTE-TUBSTB ;LENGTH OF AREA
XMOVEI T2,TUBSTB(U) ;SOURCE
XMOVEI T3,TUBSTB+1(U) ;MAKE A BLT POINTER
EXTEND T1,[XBLT] ;ZERO STORAGE
> ;END IFN FTXMON
POPJ P, ;RETURN
TPSTBL: SEBTBL (.ERTPS,TPSEND,EX.QUE)
MOVE UDBNAM(U) ;(R00) DEVICE NAME
MOVE TUBRID(U) ;(R01) REELID
MOVE TUBCRD(U) ;(R02) CHARACTERS READ
MOVE TUBCWR(U) ;(R03) CHARACTERS WRITTEN
MOVE TUBSRE(U) ;(R04) SOFT READ ERRORS
MOVE TUBHRE(U) ;(R05) HARD READ ERRORS
MOVE TUBSWE(U) ;(R06) SOFT WRITE ERRORS
MOVE TUBHWE(U) ;(R07) HARD WRITE ERRORS
MOVE TUBUID(U) ;(R10) PPN
TPSEND:! ;END OF TABLE
SUBTTL COMMAND PROCESSING -- MTABLK - SET BLOCKSIZE
MTABLK::PUSHJ P,MTFIND ;GET REMAINDER OF COMMAND AND FIND MTA DDB
JRST COMERR## ;NOT NUMERIC
AOS P2,T2 ;COPY TO WHERE IT'S NEEDED
PUSH P,U ;SAVE U
MOVE U,TDVUDB(F) ;UDB ADDRESS
PUSHJ P,TAPSBS ;VALIDATE BLOCK SIZE
SKIPA ;OUT OF RANGE
JRST UPOPJ1## ;DONE
POP P,U ;RESTORE U
JRST COMERR## ;AND TELL USER
SUBTTL COMMAND PROCESSING -- MTADEN - SET DENSITY
MTADEN::PUSHJ P,MTFIND ;GET THE REST OF COMMAND AND FIND MTA DDB
JRST COMERR## ;NOT NUMERIC
MOVE T1,[-DNTBLN,,DENTAB]
MOVE T3,0(T1) ;GET ENTRY FROM TABLE
CAIE T2,(T3) ;MATCH?
AOBJN T1,.-2 ;NO - TRY NEXT
JUMPGE T1,COMERA## ;ERROR IF NONE FOUND
HLRZ T1,T3 ;GET CODE
MOVEI T3,TUCD20## ;BIT POSITION OF LOWEST DENSITY
LSH T3,-1(T1) ;CHANGE DENSITY CODE INTO BIT POSITION
MOVE T2,TDVUDB(F) ;GET POINTER TO THE UDB FOR THIS DRIVE
TDNE T3,TUBCNF(T2) ;VALID DENSITY FOR THIS DRIVE?
JRST MTADE1 ;YES, GO PUT DENSITY IN THE DDB
JSP T1,ERRMES## ;ILLEGAL DENSITY FOR THIS DRIVE
ASCIZ \Illegal density for drive
\
MTADE1: DPB T1,TDYDN1 ;YES, STORE CODE IN DDB
IFN FTTLAB,<
TLZ T1,(ST.FAC) ;INDICATE A REQUEST ONLY
PUSHJ P,SETODN ;UPDATE DENSITY ON OTHER DDB
> ;END IFN FTTLAB
JRST CPOPJ1## ;RETURN
;TABLE OF DENSITIES
DENTAB: RB.D2,,^D200
RB.D5,,^D556
RB.D8,,^D800
RB.D16,,^D1600
RB.D62,,^D6250
DNTBLN==.-DENTAB
SUBTTL COMMAND PROCESSING -- MTAMOD - SET FORMAT
MTAMOD::PUSHJ P,MTFIND ;GET REST OF COMMAND AND SET UP F
SKIPA T1,[-MDTBLN,,MODTAB] ;SIXBIT ARGUMENT
JRST COMERR## ;NUMERIC - LOSE
PUSHJ P,FNDNAM## ;FIND THE ARGUMENT
JRST COMERA## ;SORRY, DON'T KNOW THAT ONE
CAIE T1,RB.MCD ;CORE-DUMP?
JRST MTAMD1 ;NO
MOVE T2,TDVUDB(F) ;UDB ADDRESS
MOVEI T3,TUC7TK## ;BIT TO TEST
TDNE T3,TUBCNF(T2) ;A 7-TRACK DRIVE?
MOVEI T1,RB.M7T ;YES. SET 7-TRACK CORE-DUMP
MTAMD1: DPB T1,TDYMD1 ;SAVE MODE IN DDB
PJRST CPOPJ1## ;AND TAKE GOOD RETURN
;TABLE OF VALID FORMATS
MODTAB: SIXBIT /SYSTEM/ ;SYSTEM DEFAULT
SIXBIT /DUMP/ ;CORE DUMP
SIXBIT /BYTE/ ;BYTE MODE
SIXBIT /SIXBIT/ ;SIXBIT
SIXBIT /ANSI/ ;ANSI-ASCII
SIXBIT /??????/ ;PLACE MARKER FOR 7-TRACK CORE DUMP
SIXBIT /INDUST/ ;INDUSTRY COMPATABLE
MDTBLN==.-MODTAB
SUBTTL COMMAND PROCESSING -- MTARTY - SET RETRY
MTARTY::PUSHJ P,MTFIND ;GET REST OF COMMAND, SET UP F
HLRZS T2 ;NON-NUMERIC RETURN (NORMAL)
MOVSI T1,MTSNAR ;NO AUTO-RECOVERY BIT
CAIN T2,'ON ' ;CLEAR OR SET IF 'ON' OR 'OFF'
JRST [ANDCAM T1,DEVIOS(F)
PJRST CPOPJ1##]
CAIE T2,'OF '
CAIN T2,'OFF'
JRST [IORM T1,DEVIOS(F)
PJRST CPOPJ1##]
JRST COMERR## ;NOT A LEGAL ARGUMENT
SUBTTL COMMAND PROCESSING -- PARSE MAGTAPE DEVICE SPEC
MTFIND: TLO M,CMWRQ ;CAUSE SET COMMAND FORGETS
PUSHJ P,CTXDEV## ;PICK UP DEVICE ARGUMENT
SKIPE T1,T2 ;DEVSRG EXPECTS NAME IN T1
PUSHJ P,DEVSRG## ;SEARCH FOR DDB
PJRST MTFERR ;NO SUCH DEVICE
LDB T1,PJOBN## ;GET OWNER'S JOB NUMBER
CAME T1,J ;US?
PJRST MTFERR ;NO, LOSE!
MOVE T1,DEVMOD(F)
MOVE U,TTYTAB##(J) ;RESTORE U
MOVE U,DDBLDB##(U)
TLNN T1,DVMTA ;IS DEVICE A MAGTAPE?
PJRST COMERP## ;NO, LOSE!
PUSHJ P,DECIN1## ;GET LAST ARGUMENT
PJRST NOTENP## ;NO ARGUMENT FOUND
PJRST CTEXT1## ;NOT NUMERICAL, READ SIXBIT
JRST CPOPJ1## ;RETURN.
MTFERR: MOVE U,TTYTAB##(J) ;TTY DDB
MOVE U,DDBLDB##(U) ;LDB BACK INTO LINE
PJRST COMERP## ;TYPE ERROR MESSAGE
LIT
$LOW
DIATAP: BLOCK 1 ;NON-ZERO IF DIAG IN PROGRESS
TPMEND::! END