Trailing-Edge
-
PDP-10 Archives
-
BB-4171H-BM
-
uetp/lib/spdbms.cbl
There are 11 other files named spdbms.cbl in the archive. Click here to see a list.
IDENTIFICATION DIVISION.
PROGRAM-ID. PBDBMS.
ENVIRONMENT DIVISION.
INPUT-OUTPUT SECTION.
FILE-CONTROL.
SELECT POSTAL-FILE ASSIGN TO DSK.
DATA DIVISION.
FILE SECTION.
FD POSTAL-FILE
LABEL RECORDS ARE STANDARD
VALUE OF ID CRT12-REPORT-FILE-NME
DATA RECORD IS POSTAL-REC.
01 POSTAL-REC.
05 PARENT-P PIC X(4).
05 BRANCH-P PIC X(4).
05 METER-P PIC X(5).
05 UPDATED-P PIC X(5).
05 ACT-RECS-P PIC X(5).
05 CUSTOMER-P PIC X(5).
05 DATE-P PIC X(6).
SCHEMA SECTION.
*SINGLE INVOKE SUB-SCHEMA SUBPIT OF SCHEMA PITNEY.
*SHARED INVOKE SUB-SCHEMA SUBPIT OF SCHEMA SPDAVE.
*NOJOUR INVOKE SUB-SCHEMA SUBPIT OF SCHEMA PBLOAD.
INVOKE SUB-SCHEMA SUBPIT OF SCHEMA SPDAVE.
WORKING-STORAGE SECTION.
01 CRT12-REPORT-FILE-NME PIC X(9).
01 DATA-BASE-IS-OPEN PIC X VALUE "N".
01 THIS-TRANSACTION-UPDATES PIC X.
01 DONE-FLAG PIC X(3).
01 NEXT-ACTIVITY-RECORD PIC S9(10) COMP.
01 MAXIMUM-RECORDS PIC S9(10) COMP.
01 MESSAGE-CONTROL-WS.
05 MESSAGE-KEY-WS.
10 MCS-KEY-WS PIC X(5).
10 MCS-ERROR-STATUS-WS PIC 9(5).
10 MCS-ESM-WS PIC X(10).
05 MESSAGE-WS.
10 MCS-WS PIC X(30).
10 MCS-TRANS-WS PIC X(30).
01 CUST-LS PIC X(10) VALUE "CUSTOMER".
01 METER-LS PIC X(10) VALUE "METER".
01 ACTIVITY-LS PIC X(10) VALUE "ACTIVITY".
01 PARENT-LS PIC X(10) VALUE "PARENT".
01 BRANCH-LS PIC X(10) VALUE "BRANCH".
01 COMPUTATIONAL-COUNTERS COMPUTATIONAL.
02 PARENT-COUNT PIC S9(10).
02 BRANCH-COUNT PIC S9(10).
02 METER-COUNT PIC S9(10).
02 TRANSACTION-COUNT PIC S9(10).
02 CALL-COUNT PIC S9(10).
02 LAST-T12-COUNT PIC S9(10).
02 THE-ERROR-COUNT PIC S9(10).
01 TRANSACTION-ID.
02 CR-user-application PIC X(8).
02 CR-user-job-number PIC X(3).
02 CR-user-identity PIC X(8).
02 CR-user-terminal-number PIC X(3).
02 FILLER PIC X.
02 CR-user-transaction-count PIC X(4).
02 FILLER PIC X.
02 TI-user-transaction-type PIC X(2).
LINKAGE SECTION.
01 COMMUNICATION-RECORD COPY COMREC.
PROCEDURE DIVISION USING COMMUNICATION-RECORD.
DECLARATIVES.
DBMS-ERROR SECTION.
USE IF ERROR-STATUS.
DBMS-ERROR-CHECK.
IF ERROR-STATUS = 307 OR 326
GO TO DBMS-ERROR-EXIT.
DISPLAY "ERROR STATUS " ERROR-STATUS.
DISPLAY "ERROR AREA " ERROR-AREA.
DISPLAY "ERROR RECORD " ERROR-RECORD.
DISPLAY "ERROR SET " ERROR-SET.
DBMS-ERROR-EXIT.
EXIT.
END DECLARATIVES.
GO TO S06-RETURN-ROUTINE.
S00-OPENING SECTION.
ENTRY DBOPEN USING COMMUNICATION-RECORD.
P00-CHECK-SWITCH.
IF DATA-BASE-IS-OPEN = "N"
* THEN
*SINGLE OPEN ALL USAGE-MODE UPDATE
*SHARED OPEN JOURNAL USAGE-MODE EXCLUSIVE UPDATE
*SHARED OPEN ALL USAGE-MODE EXCLUSIVE UPDATE
*NOJOUR OPEN JOURNAL USAGE-MODE EXCLUSIVE UPDATE
OPEN JOURNAL USAGE-MODE EXCLUSIVE UPDATE
OPEN ALL USAGE-MODE EXCLUSIVE UPDATE
MOVE 0 TO TRANSACTION-COUNT CALL-COUNT
IF ERROR-STATUS > 0
* THEN ---ERROR ON DATA BASE OPEN---
MOVE 99 TO CR-return-code
DISPLAY '[Could not open data base. Error='
ERROR-STATUS , ']'
ELSE
MOVE "Y" TO DATA-BASE-IS-OPEN
ELSE
NEXT SENTENCE.
GO TO S06-RETURN-ROUTINE.
S03-CLOSE-ROUTINE SECTION.
ENTRY DBCLOS USING COMMUNICATION-RECORD.
P00-DBMS-CLOSE.
IF DATA-BASE-IS-OPEN = "Y"
CLOSE RUN-UNIT.
IF ERROR-STATUS > 0
* THEN
MOVE 99 TO CR-return-code
DISPLAY '[Could not close data base. Error='
ERROR-STATUS , ']'
ELSE
MOVE 'N' TO DATA-BASE-IS-OPEN.
ENTER MACRO STATS.
GO TO S06-RETURN-ROUTINE.
*************************************
S04-ACCESS-ROUTINES SECTION.
*************************************
P01-FIND-CUSTOMER.
FIND CUSTOMER-RECORD RECORD.
IF ERROR-STATUS NOT = ZERO
GO TO P02-CUSTOMER-ERROR.
GET.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P03-FIND-CUSTOMER-EXIT.
P02-CUSTOMER-ERROR.
MOVE 3 TO CR-RETURN-CODE.
PERFORM P52-MCS-MESSAGE.
MOVE ' FIND-CUSTOMER ERROR' TO MCS-WS.
P03-FIND-CUSTOMER-EXIT.
EXIT.
P04-FIND-METER.
FIND METER-RECORD RECORD.
IF ERROR-STATUS NOT = ZERO
GO TO P05-METER-ERROR.
GET.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P06-FIND-METER-EXIT.
P05-METER-ERROR.
MOVE 1 TO CR-RETURN-CODE.
PERFORM P52-MCS-MESSAGE.
MOVE ' FIND-METER ERROR' TO MCS-WS.
P06-FIND-METER-EXIT.
EXIT.
P07-FIND-PARENT-PO.
FIND PARENT-PO-RECORD RECORD.
IF ERROR-STATUS NOT = ZERO
GO TO P08-PARENT-PO-ERROR.
GET.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P09-FIND-PARENT-PO-EXIT.
P08-PARENT-PO-ERROR.
MOVE 8 TO CR-RETURN-CODE.
PERFORM P52-MCS-MESSAGE.
MOVE ' FIND-PARENT ERROR' TO MCS-WS.
P09-FIND-PARENT-PO-EXIT.
EXIT.
P10-FIND-BRANCH-PO.
FIND BRANCH-PO-RECORD RECORD.
IF ERROR-STATUS NOT = ZERO
GO TO P11-BRANCH-PO-ERROR.
GET.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P12-FIND-BRANCH-PO-EXIT.
P11-BRANCH-PO-ERROR.
MOVE 5 TO CR-RETURN-CODE.
PERFORM P52-MCS-MESSAGE.
MOVE ' FIND-BRANCH ERROR' TO MCS-WS.
P12-FIND-BRANCH-PO-EXIT.
EXIT.
P13-FIND-ACTIVITY.
FIND NEXT METER-ACT-RECORD RECORD OF METER-SET SET.
IF ERROR-STATUS NOT = ZERO
GO TO P14-ACTIVITY-ERROR.
GET.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P15-FIND-ACTIVITY-EXIT.
P14-ACTIVITY-ERROR.
MOVE 99 TO CR-RETURN-CODE.
PERFORM P52-MCS-MESSAGE.
MOVE ' FIND-ACTIVITY ERROR' TO MCS-WS.
P15-FIND-ACTIVITY-EXIT.
EXIT.
P16-FIND-CUSTOMER-HISTORY.
FIND CUSTOMER-HISTORY-RECORD RECORD.
IF ERROR-STATUS NOT = ZERO
GO TO P17-CUSTOMER-HISTORY-ERROR.
GET.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P18-FIND-CUSTOMER-HISTORY-EXIT.
P17-CUSTOMER-HISTORY-ERROR.
MOVE 99 TO CR-RETURN-CODE.
PERFORM P52-MCS-MESSAGE.
MOVE ' FIND-CUSTOMER-HISTORY ERROR' TO MCS-WS.
P18-FIND-CUSTOMER-HISTORY-EXIT.
EXIT.
P19-FIND-BRANCH-HISTORY.
FIND BRANCH-HISTORY-RECORD RECORD.
IF ERROR-STATUS NOT = ZERO
GO TO P20-BRANCH-HISTORY-ERROR.
GET.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P21-FIND-BRANCH-HISTORY-EXIT.
P20-BRANCH-HISTORY-ERROR.
MOVE 99 TO CR-RETURN-CODE.
PERFORM P52-MCS-MESSAGE.
MOVE ' FIND-BRANCH-HISTORY ERROR' TO MCS-WS.
P21-FIND-BRANCH-HISTORY-EXIT.
EXIT.
P22-STORE-CUSTOMER.
MOVE ZERO TO CR-RETURN-CODE.
STORE CUSTOMER-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' STORE-CUSTOMER ERROR' TO MCS-WS.
P23-STORE-CUSTOMER-EXIT.
EXIT.
P24-STORE-METER.
MOVE ZERO TO CR-RETURN-CODE.
STORE METER-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' STORE-METER ERROR' TO MCS-WS.
P25-STORE-METER-EXIT.
EXIT.
P26-STORE-PARENT-PO.
MOVE ZERO TO CR-RETURN-CODE.
STORE PARENT-PO-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' STORE-PARENT ERROR' TO MCS-WS.
P27-STORE-PARENT-PO-EXIT.
EXIT.
P28-STORE-BRANCH-PO.
MOVE ZERO TO CR-RETURN-CODE.
STORE BRANCH-PO-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' STORE-BRANCH ERROR' TO MCS-WS.
P29-STORE-BRANCH-PO-EXIT.
EXIT.
P30-STORE-ACTIVITY.
MOVE ZERO TO CR-RETURN-CODE.
STORE METER-ACT-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' STORE-ACTIVITY ERROR' TO MCS-WS.
P31-STORE-ACTIVITY-EXIT.
EXIT.
P32-STORE-CUSTOMER-HISTORY.
MOVE ZERO TO CR-RETURN-CODE.
MOVE METER-NUMBER TO METER-CUSTOMER-HISTORY-NUMBER.
MOVE CUSTOMER-NUMBER TO CUSTOMER-HISTORY-NUMBER.
STORE CUSTOMER-HISTORY-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' STORE-CUSTOMER-HISTORY ERROR'
TO MCS-WS.
P33-STORE-CUST-HISTORY-EXIT.
EXIT.
P34-STORE-BRANCH-HISTORY.
MOVE ZERO TO CR-RETURN-CODE.
MOVE METER-NUMBER TO METER-BRANCH-HISTORY-NUMBER.
MOVE BRANCH-NUMBER TO BRANCH-HISTORY-NUMBER.
STORE BRANCH-HISTORY-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' STORE-BRANCH-HISTORY ERROR'
TO MCS-WS.
P35-STORE-BRANCH-HISTORY-EXIT.
EXIT.
P36-MODIFY-CUSTOMER.
MOVE ZERO TO CR-RETURN-CODE.
MODIFY CUSTOMER-RECORD; CUST-DATE, CUST-UPDATE-FLAG.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' MODIFY-CUSTOMER ERROR' TO MCS-WS.
P37-MODIFY-CUSTOMER-EXIT.
EXIT.
P38-MODIFY-METER.
MOVE ZERO TO CR-RETURN-CODE.
MOVE CRB-HHMM TO METER-LAST-UPDATE.
MODIFY METER-RECORD; METER-ACT-RECORDS; METER-LAST-UPDATE;
METER-UPDATE-FLAG.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' MODIFY-METER ERROR' TO MCS-WS.
P39-MODIFY-METER-EXIT.
EXIT.
P40-MODIFY-PARENT-PO.
MOVE ZERO TO CR-RETURN-CODE.
MODIFY PARENT-PO-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' MODIFY-PARENT ERROR' TO MCS-WS.
P41-MODIFY-PARENT-PO-EXIT.
EXIT.
P42-MODIFY-BRANCH-PO.
MOVE ZERO TO CR-RETURN-CODE.
MODIFY BRANCH-PO-RECORD.
IF ERROR-STATUS NOT = ZERO
PERFORM P50-ERROR-STATUS
PERFORM P52-MCS-MESSAGE
MOVE ' MODIFY-BRANCH ERROR' TO MCS-WS.
P43-MODIFY-BRANCH-PO-EXIT.
EXIT.
******************************************
S06-RETURN-ROUTINE SECTION.
******************************************
P44-NORMAL-RETURN.
IF THE-ERROR-COUNT > 0
* THEN --ERROR HAS OCCURED---
GO TO P45-ERROR-RETURN
ELSE
NEXT SENTENCE.
MOVE ZERO TO CR-RETURN-CODE.
IF THIS-TRANSACTION-UPDATES = 'Y'
* THEN ---NEED TO END TRANSACTION--
ENTER MACRO JETRAN USING TRANSACTION-ID, TRANSACTION-COUNT
ELSE
NEXT SENTENCE.
GO TO DO-THE-RETURN.
P45-ERROR-RETURN.
IF CR-RETURN-CODE = 0
* THEN
MOVE 99 TO CR-RETURN-CODE
ELSE
NEXT SENTENCE.
IF THIS-TRANSACTION-UPDATES = 'Y'
* THEN --- MUST BACKOUT THE TRANSACTION ---
DISPLAY '[backing out Transaction #' TRANSACTION-COUNT,
' with ID=' TRANSACTION-ID ']'
ENTER MACRO JBTRAN USING 0
ELSE
NEXT SENTENCE.
GO TO DO-THE-RETURN.
DO-THE-RETURN.
GOBACK.
P50-ERROR-STATUS.
MOVE 99 TO CR-RETURN-CODE.
ADD 1 TO THE-ERROR-COUNT.
P51-EXIT.
EXIT.
P52-MCS-MESSAGE.
MOVE ERROR-STATUS TO MCS-ERROR-STATUS-WS.
MOVE ' ERR STAT' TO MCS-ESM-WS.
MOVE TRANSACTION-ID TO MCS-TRANS-WS.
P53-EXIT.
EXIT.
**************************************
S08-TRANSACTION-PROCESSING SECTION.
**************************************
ENTRY DBTRAN USING COMMUNICATION-RECORD.
P100-TRANS-CONTROL.
IF CR-OPEN-DATA-BASE
* THEN
IF DATA-BASE-IS-OPEN = "Y"
* THEN
MOVE 0 TO CR-RETURN-CODE
GO TO S06-RETURN-ROUTINE
ELSE
MOVE 99 TO CR-RETURN-CODE
GO TO S06-RETURN-ROUTINE
ELSE
IF CR-CLOSE-DATA-BASE
* THEN
IF DATA-BASE-IS-OPEN = 'NO'
* THEN
MOVE 0 TO CR-RETURN-CODE
GO TO S06-RETURN-ROUTINE
ELSE
MOVE 99 TO CR-RETURN-CODE
GO TO S06-RETURN-ROUTINE
ELSE
NEXT SENTENCE.
IF DATA-BASE-IS-OPEN = 'N'
* THEN
MOVE 99 TO CR-return-code
GO TO P45-ERROR-RETURN
ELSE
NEXT SENTENCE.
* Dispatch to the transaction handler as specified by the
* value in the COMMUNICATION-RECORD variable CR-transaction-number.
*SINGLE MOVE 'N' TO THIS-TRANSACTION-UPDATES.
*SHARED MOVE 'N' TO THIS-TRANSACTION-UPDATES.
*NOJOUR MOVE 'Z' TO THIS-TRANSACTION-UPDATES.
MOVE 'N' TO THIS-TRANSACTION-UPDATES.
MOVE 0 TO THE-ERROR-COUNT.
MOVE SPACES TO CR-USER-MESSAGE.
ADD 1 TO CALL-COUNT.
GO TO P101-TRANS-CR-T01
P111-TRANS-CR-T02
P116-TRANS-CR-T03
P122-TRANS-CR-T04
P126-TRANS-CR-T05
P128-TRANS-CR-T06
P134-TRANS-CR-T07
P135-TRANS-CR-T08
P200-TRANS-CR-T09
P300-TRANS-CR-T10
P400-TRANS-CR-T11
P500-TRANS-CR-T12
P600-TRANS-CR-T13
P700-TRANS-CR-T14
DEPENDING ON CR-TRANSACTION-NUMBER.
P100A.
GO TO P45-ERROR-RETURN.
********** ***************
* TRANSACTION TYPE 1
*
* FUNCTION: Link a meter to a customer and branch
*
* Verify the customer, meter, and branch numbers.
* If the meter is currently linked to a customer and/or a
* branch, break the links.
* Link the meter to the specified customer and branch.
*
********** ***************
* Verify customer, meter, and branch numbers:
P101-TRANS-CR-T01.
MOVE CRB-CUSTOMER-NUMBER TO CUSTOMER-NUMBER.
PERFORM P01-FIND-CUSTOMER THRU P03-FIND-CUSTOMER-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
P102.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
P103.
MOVE CRB-BRANCH-PO-NUMBER TO BRANCH-NUMBER.
PERFORM P10-FIND-BRANCH-PO THRU
P12-FIND-BRANCH-PO-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
* At this point this transaction will cause some updating
PERFORM P1000-MARK-UPDATE-TRANSACTION.
* If meter already linked to customer, break the link.
P103-CUST-METER-LINK.
FIND OWNER IN CUSTOMER-METER-SET
OF CURRENT OF METER-RECORD RECORD.
P103A.
IF ERROR-STATUS > 0
* THEN assume records not linked.
GO TO P105-PO-METER-LINK
ELSE
NEXT SENTENCE.
GET.
P104-ERROR.
PERFORM P32-STORE-CUSTOMER-HISTORY THRU
P33-STORE-CUST-HISTORY-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO P110A-ERROR.
MOVE 6 TO CR-RETURN-CODE.
PERFORM S13-DELETE-ROUTINES.
* If meter already linked to branch, break the link.
P105-PO-METER-LINK.
FIND OWNER IN BRANCH-METER-SET
OF CURRENT OF METER-RECORD RECORD.
P105A.
IF ERROR-STATUS > 0
* THEN assume record has no owner
GO TO P107-INSERT-CUST-METER
ELSE
NEXT SENTENCE.
GET.
P106-ERROR.
PERFORM P34-STORE-BRANCH-HISTORY THRU
P35-STORE-BRANCH-HISTORY-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO P110A-ERROR.
MOVE 7 TO CR-RETURN-CODE.
PERFORM S13-DELETE-ROUTINES.
* Link meter to customer and branch
*first reestablish correct current customers, branches and make
* meter current of run unit.
P107-INSERT-CUST-METER.
MOVE CRB-CUSTOMER-NUMBER TO CUSTOMER-NUMBER.
PERFORM P01-FIND-CUSTOMER THRU P03-FIND-CUSTOMER-EXIT.
MOVE CRB-BRANCH-PO-NUMBER TO BRANCH-NUMBER.
PERFORM P10-FIND-BRANCH-PO THRU P12-FIND-BRANCH-PO-EXIT.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
* link customer and meter
INSERT METER-RECORD INTO CUSTOMER-METER-SET.
* Link the meter to the branch.
P108.
INSERT METER-RECORD INTO BRANCH-METER-SET.
P110.
MOVE ZERO TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
P110A-ERROR.
MOVE 99 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 2
*
* FUNCTION: Add a new meter activity.
*
* Verify the meter number exists.
* Create a meter activity record and link to the meter.
*
********** ***************
* Verify the meter record.
P111-TRANS-CR-T02.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
P112.
* An update is sure to follow
PERFORM P1000-MARK-UPDATE-TRANSACTION.
* Set up the information in the activity record.
MOVE CRB-date TO METER-ACT-DATE.
MOVE CRB-ACTIVITY-CODE TO METER-ACT-CODE.
MOVE ACTIVITY-LS TO METER-ACT-REC-DESC.
P113.
* Store the activity record and insert in meter set (Automatic).
PERFORM P30-STORE-ACTIVITY
THRU P31-STORE-ACTIVITY-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO P115.
P114.
* Update the count of meter activity records.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
ADD 1 TO METER-ACT-RECORDS.
PERFORM P38-MODIFY-METER THRU P39-MODIFY-METER-EXIT.
P115.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 3
*
* FUNCTION: Establish links between parent and branch po.
*
* Verify the the branch and parent exist.
* If the branch is currently linked, then unlink it.
* Link the branch and parent together.
*
********** ***************
P116-TRANS-CR-T03.
MOVE CRB-PARENT-PO-NUMBER TO PARENT-NUMBER.
PERFORM P07-FIND-PARENT-PO THRU P09-FIND-PARENT-PO-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
P117.
MOVE CRB-BRANCH-PO-NUMBER TO BRANCH-NUMBER.
PERFORM P10-FIND-BRANCH-PO THRU P12-FIND-BRANCH-PO-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
* At this point it is probable that the transaction will be updated.
PERFORM P1000-MARK-UPDATE-TRANSACTION.
P118-PARENT-BRANCH-PO-LINK.
FIND OWNER IN PARENT-SET OF CURRENT OF BRANCH-PO-RECORD RECORD.
P118A.
IF ERROR-STATUS > 0
* THEN
GO TO P120-INSERT-PARENT-BRANCH-PO
ELSE
NEXT SENTENCE.
GET.
IF PARENT-NUMBER = CRB-PARENT-PO-NUMBER
* THEN ---OLD PARENT SAME AS NEW----
MOVE 0 TO CR-RETURN-CODE
MOVE 'N' TO THIS-TRANSACTION-UPDATES
GO TO S09-RETURN-ROUTINE
ELSE
NEXT SENTENCE.
P119-ERROR.
MOVE CRB-BRANCH-PO-NUMBER TO BRANCH-NUMBER.
PERFORM P10-FIND-BRANCH-PO THRU
P12-FIND-BRANCH-PO-EXIT.
MOVE 9 TO CR-RETURN-CODE.
PERFORM S13-DELETE-ROUTINES.
P120-INSERT-PARENT-BRANCH-PO.
MOVE ZERO TO CR-RETURN-CODE.
MOVE CRB-PARENT-PO-NUMBER TO PARENT-NUMBER.
PERFORM P07-FIND-PARENT-PO THRU P09-FIND-PARENT-PO-EXIT.
MOVE CRB-BRANCH-PO-NUMBER TO BRANCH-NUMBER.
PERFORM P10-FIND-BRANCH-PO THRU P12-FIND-BRANCH-PO-EXIT.
INSERT BRANCH-PO-RECORD INTO PARENT-SET.
P121.
MOVE 0 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 4
*
* FUNCTION: Delete a customer from the disk.
*
* Verify the customer number.
* Break any links between it and post history records.
* Delete the customer.
*
********** ***************
* Validate the customer number
P122-TRANS-CR-T04.
MOVE CRB-CUSTOMER-NUMBER TO CUSTOMER-NUMBER.
PERFORM P01-FIND-CUSTOMER THRU P03-FIND-CUSTOMER-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
* Mark this, an update transaction
PERFORM P1000-MARK-UPDATE-TRANSACTION.
P123-CUST-METER-LINK.
* for each meter linked to customer, post a history record.
FIND NEXT RECORD OF CUSTOMER-METER-SET SET.
IF ERROR-STATUS > 0
* THEN
GO TO P125-DELETE-CUST
ELSE
NEXT SENTENCE.
GET.
PERFORM P32-STORE-CUSTOMER-HISTORY THRU
P33-STORE-CUST-HISTORY-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO P125-DELETE-CUST.
GO TO P123-CUST-METER-LINK.
P125-DELETE-CUST.
* Delete the customer, thereby removing all links to meters
MOVE CRB-CUSTOMER-NUMBER TO CUSTOMER-NUMBER.
PERFORM P01-FIND-CUSTOMER THRU P03-FIND-CUSTOMER-EXIT.
MOVE 11 TO CR-RETURN-CODE.
PERFORM S13-DELETE-ROUTINES.
P125A.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 5
*
* FUNCTION: Add a customer.
*
* Verify the customer does not exists and add.
*
********** ***************
P126-TRANS-CR-T05.
MOVE CRB-CUSTOMER-NUMBER TO CUSTOMER-NUMBER.
PERFORM P01-FIND-CUSTOMER THRU P03-FIND-CUSTOMER-EXIT.
IF CR-RETURN-CODE = 3 GO TO P127-ADD-CUST.
P126A.
MOVE 4 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
P127-ADD-CUST.
PERFORM P1000-MARK-UPDATE-TRANSACTION.
MOVE CRB-DATE TO CUST-DATE.
MOVE CUST-LS TO CUST-REC-DESC.
PERFORM P22-STORE-CUSTOMER THRU P23-STORE-CUSTOMER-EXIT.
P127A.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 6
*
* FUNCTION: Delete a meter from the disk.
*
* Verify meter number exists.
* Break all links with customers and branches.
* Delete all history and activity records associated with meter.
* Delete the meter.
*
********** ***************
P128-TRANS-CR-T06.
* Verify meter exists
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-RETURN-CODE > ZERO
GO TO S09-RETURN-ROUTINE.
P133-DELETE-METER.
PERFORM P1000-MARK-UPDATE-TRANSACTION.
* Delete meter thereby taking with it all history and activity records
* and also removing it from sets with customer and branch records.
MOVE 12 TO CR-RETURN-CODE.
PERFORM S13-DELETE-ROUTINES.
P133A.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 7
*
* FUNCTION: Add a meter.
*
* Verify meter does not exist.
* Add the meter.
*
********** ***************
P134-TRANS-CR-T07.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-RETURN-CODE = ZERO
GO TO P134C-ERROR.
P134A-CREATE-METER.
PERFORM P1000-MARK-UPDATE-TRANSACTION.
MOVE METER-LS TO METER-REC-DESC.
MOVE CRB-HHMM TO METER-LAST-UPDATE.
PERFORM P24-STORE-METER THRU P25-STORE-METER-EXIT.
P134B.
GO TO S09-RETURN-ROUTINE.
P134C-ERROR.
MOVE 2 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 8
*
* FUNCTION: Update information associated with a meter
*
* Verify that meter and customer exist.
* Create activity record and update meter and customer records.
*
********** ***************
P135-TRANS-CR-T08.
* DISPLAY "ENTER IN CR-TRANSACTION-SUBTYPE PIC 9".
* ACCEPT CR-TRANSACTION-SUBTYPE.
* If whole transaction type 8 --- (from interactive user) then
* all information here---- do everything
IF CR-T08-DO-EVERYTHING
GO TO P136-DO-EVERYTHING.
* If getting piecemeal transactions from VRU then do one thing
* at a time.
GO TO
P137-VERIFY-CUSTOMER
P138-VERIFY-METER
P139-VERIFY-CM-LINK
*GROUP -- AFTER DISCUSSIONS WITH PB, ALL UPDATES SHOULD BE DONE AT ONCE
*GROUP P140-UPDATE-CM-RECS
*GROUP P145-CREATE-ACTIVITY
P139B
P136B
DEPENDING ON CR-transaction-subtype.
* illegal subtype -- tell caller
MOVE 99 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
P136-DO-EVERYTHING.
PERFORM P137-VERIFY-CUSTOMER.
IF CR-RETURN-CODE > ZERO
GO TO P147-TRANS-08-EXIT.
PERFORM P138-VERIFY-METER.
IF CR-RETURN-CODE > ZERO
GO TO P147-TRANS-08-EXIT.
PERFORM P139-VERIFY-CM-LINK.
IF CR-RETURN-CODE > ZERO
GO TO P147-TRANS-08-EXIT.
PERFORM P141-UPDATE-CUSTOMER.
PERFORM P143-UPDATE-DATA.
PERFORM P145-CREATE-ACTIVITY.
P136A.
GO TO S09-RETURN-ROUTINE.
P136B.
PERFORM P137-VERIFY-CUSTOMER.
PERFORM P141-UPDATE-CUSTOMER.
PERFORM P143-UPDATE-DATA.
PERFORM P145-CREATE-ACTIVITY.
P137-VERIFY-CUSTOMER.
MOVE CRB-CUSTOMER-NUMBER TO CUSTOMER-NUMBER.
PERFORM P01-FIND-CUSTOMER THRU P03-FIND-CUSTOMER-EXIT.
IF CR-RETURN-CODE = ZERO
MOVE CUST-UPDATE-FLAG TO
CRT08-CUSTOMER-UPDATE-COUNT.
P137A.
GO TO P147-TRANS-08-EXIT.
P138-VERIFY-METER.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-RETURN-CODE = ZERO
MOVE METER-UPDATE-FLAG TO
CRT08-METER-UPDATE-COUNT.
P138A.
GO TO P147-TRANS-08-EXIT.
P139-VERIFY-CM-LINK.
IF NOT CR-T08-DO-EVERYTHING
* THEN --MUST GET METER AGAIN--
PERFORM P138-VERIFY-METER
IF CR-return-code NOT = 0
* THEN --COULD NOT FIND METER--
GO TO P147-TRANS-08-EXIT
ELSE
NEXT SENTENCE
ELSE
NEXT SENTENCE.
FIND OWNER IN CUSTOMER-METER-SET OF CURRENT OF METER-RECORD RECORD.
IF ERROR-STATUS > 0
* THEN -- NO OWNER --
MOVE 10 TO CR-RETURN-CODE
ELSE
GET
IF CUSTOMER-NUMBER NOT = CRB-customer-number
* THEN --- wrong owner--
MOVE 10 TO CR-RETURN-CODE
ELSE
NEXT SENTENCE.
P139A.
GO TO P147-TRANS-08-EXIT.
P139B.
PERFORM P138-VERIFY-METER.
ADD 1 METER-UPDATE-FLAG GIVING CRT08-METER-UPDATE-COUNT.
PERFORM P137-VERIFY-CUSTOMER.
ADD 1 CUST-UPDATE-FLAG GIVING
CRT08-CUSTOMER-UPDATE-COUNT.
GO TO P147-TRANS-08-EXIT.
P140-UPDATE-CM-RECS.
PERFORM P138-VERIFY-METER.
IF CR-RETURN-CODE > ZERO
GO TO P147-TRANS-08-EXIT.
PERFORM P137-VERIFY-CUSTOMER.
IF CR-RETURN-CODE > ZERO
GO TO P147-TRANS-08-EXIT.
P141-UPDATE-CUSTOMER.
PERFORM P1000-MARK-UPDATE-TRANSACTION.
ADD 1 TO CUST-UPDATE-FLAG.
MOVE CUST-UPDATE-FLAG TO CRT08-CUSTOMER-UPDATE-COUNT.
MOVE CRB-DATE TO CUST-DATE.
PERFORM P36-MODIFY-CUSTOMER THRU
P37-MODIFY-CUSTOMER-EXIT.
P143-UPDATE-DATA.
PERFORM P138-VERIFY-METER.
ADD 1 TO METER-UPDATE-FLAG.
MOVE METER-UPDATE-FLAG TO CRT08-METER-UPDATE-COUNT.
ADD 1 TO METER-ACT-RECORDS.
MOVE CRB-hhmm TO METER-LAST-UPDATE.
PERFORM P38-MODIFY-METER THRU P39-MODIFY-METER-EXIT.
P144.
GO TO P147-TRANS-08-EXIT.
P145-CREATE-ACTIVITY.
*GROUP IF DOING ALL UPDATES AT ONCE, THEN METER WAS LAST THING FOUND.
*GROUP IF NOT CR-T08-DO-EVERYTHING
*GROUP* THEN --MUST GET METER AGAIN--
*GROUP PERFORM P138-VERIFY-METER
*GROUP IF CR-return-code NOT = 0
*GROUP* THEN --COULD NOT FIND METER--
*GROUP GO TO S09-RETURN-ROUTINE
*GROUP ELSE
*GROUP NEXT SENTENCE
*GROUP ELSE
*GROUP NEXT SENTENCE.
*GROUP
PERFORM P1000-MARK-UPDATE-TRANSACTION.
MOVE CRB-date TO METER-ACT-DATE.
MOVE CRB-activity-code TO METER-ACT-CODE.
MOVE ACTIVITY-LS TO METER-ACT-REC-DESC.
PERFORM P30-STORE-ACTIVITY THRU
P31-STORE-ACTIVITY-EXIT.
P146.
GO TO P147-TRANS-08-EXIT.
P147-TRANS-08-EXIT.
EXIT.
P148.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 9
*
* FUNCTION: Retrieve recent activities associated with a meter.
*
* Verify meter number.
* Return activity information for last (up to) 10 updates.
*
********** ***************
P200-TRANS-CR-T09.
MOVE CRB-meter-number TO METER-NUMBER.
PERFORM P04-FIND-METER THRU P06-FIND-METER-EXIT.
IF CR-return-code > ZERO
* THEN
GO TO S09-RETURN-ROUTINE
ELSE
NEXT SENTENCE.
* FIND-METER also does a dbms GET.
MOVE METER-LAST-UPDATE TO CRB-hhmm.
MOVE 0 TO CRT09-NUMBER-OF-ACTIVITIES.
IF METER-ACT-RECORDS = 0
* THEN --- NO ACTIVITY RECORDS---
GO TO S09-RETURN-ROUTINE
ELSE
NEXT SENTENCE.
MOVE 'NO' TO DONE-FLAG.
MOVE 10 TO MAXIMUM-RECORDS.
MOVE 0 TO NEXT-ACTIVITY-RECORD.
PERFORM P250-GET-NEXT-ACTIVITY-RECORD UNTIL DONE-FLAG = 'YES'.
MOVE 0 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
P250-GET-NEXT-ACTIVITY-RECORD.
IF NEXT-ACTIVITY-RECORD = MAXIMUM-RECORDS
* THEN
MOVE 'YES' TO DONE-FLAG
MOVE MAXIMUM-RECORDS TO CRT09-NUMBER-OF-ACTIVITIES
ELSE
PERFORM P13-FIND-ACTIVITY THRU P15-FIND-ACTIVITY-EXIT
IF CR-RETURN-CODE NOT = 0
* THEN
MOVE 'YES' TO DONE-FLAG
MOVE NEXT-ACTIVITY-RECORD TO CRT09-NUMBER-OF-ACTIVITIES
ELSE
ADD 1 TO NEXT-ACTIVITY-RECORD
MOVE METER-ACT-CODE TO CRT09-ACTIVITY-CODE (NEXT-ACTIVITY-RECORD)
MOVE METER-ACT-DATE TO CRT09-DATE (NEXT-ACTIVITY-RECORD).
********** ***************
* TRANSACTION TYPE 10
*
* FUNCTION: Determine meter that specified customer is linked to.
*
* Verify customer on disk.
* Find first meter customer is linked to.
*
********** ***************
P300-TRANS-CR-T10.
MOVE CRB-CUSTOMER-NUMBER TO CUSTOMER-NUMBER.
PERFORM P01-FIND-CUSTOMER THRU P03-FIND-CUSTOMER-EXIT.
IF CR-RETURN-CODE > 0
* THEN
GO TO S09-RETURN-ROUTINE
ELSE
NEXT SENTENCE.
* Here with customer record found and retrieved.
MOVE CUST-DATE TO CRB-DATE.
MOVE CUST-DATE TO CRT10-METER-DATE.
MOVE ZERO TO CRB-METER-NUMBER.
P301-READ-SET.
FIND NEXT RECORD OF CUSTOMER-METER-SET SET.
IF ERROR-STATUS NOT = 0
* THEN
GO TO P305.
GET.
P302-CHECK.
IF METER-NUMBER > CRB-METER-NUMBER
PERFORM P304.
P303.
GO TO P301-READ-SET.
P304.
MOVE METER-NUMBER TO CRB-METER-NUMBER.
MOVE METER-LAST-UPDATE TO CRB-hhmm.
P305.
MOVE CRB-METER-NUMBER TO METER-NUMBER.
PERFORM P13-FIND-ACTIVITY THRU P15-FIND-ACTIVITY-EXIT
VARYING NEXT-ACTIVITY-RECORD FROM 0
BY 1 UNTIL CR-RETURN-CODE NOT = 0.
MOVE 0 TO CR-RETURN-CODE.
MOVE NEXT-ACTIVITY-RECORD TO CRT10-METER-UPDATE-COUNT.
P399-RETURN.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 11
*
* FUNCTION: Find parent po that the specified branch is linked to.
*
* Verify branch exists.
* Find parent associated with branch.
*
********** ***************
P400-TRANS-CR-T11.
MOVE CRB-BRANCH-PO-NUMBER TO BRANCH-NUMBER.
PERFORM P10-FIND-BRANCH-PO THRU P12-FIND-BRANCH-PO-EXIT.
IF CR-RETURN-CODE > 0
* THEN
GO TO S09-RETURN-ROUTINE
ELSE
NEXT SENTENCE.
* branch po record has been found and is available
GET.
FIND OWNER IN PARENT-SET OF CURRENT OF BRANCH-PO-RECORD RECORD.
IF ERROR-STATUS > 0
* THEN
MOVE 0 TO CRB-PARENT-PO-NUMBER
MOVE 8 TO CR-RETURN-CODE
ELSE
GET
MOVE PARENT-NUMBER TO CRB-PARENT-PO-NUMBER.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 12
*
* FUNCTION: Generate report of data base of all records link
* thru a parent po.
*
* Verify at least one parent po exists.
* Dump the data base by following links to a file.
* Write one record at a time.
*
********** ***************
P500-TRANS-CR-T12.
IF CR-transaction-subtype = 0
* THEN -- this is the first call --
NEXT SENTENCE
ELSE
GO TO P505-CONTINUE-TRANSACTION.
MOVE 0 TO PARENT-COUNT, BRANCH-COUNT, METER-COUNT.
*
* do data base dump starting at first PARENT-PO-RECORD.
*
FIND FIRST PARENT-PO-RECORD RECORD OF PARENT-PO-AREA AREA.
IF ERROR-STATUS > 0
* THEN
MOVE 8 TO CR-RETURN-CODE
GO TO S09-RETURN-ROUTINE
ELSE
MOVE CRT12-REPORT-FILE-NAME TO CRT12-REPORT-FILE-NME
OPEN OUTPUT POSTAL-FILE
MOVE CALL-COUNT TO LAST-T12-COUNT
GO TO P520-PARENT-LOOP-2.
P505-CONTINUE-TRANSACTION.
ADD 1 TO LAST-T12-COUNT.
IF LAST-T12-COUNT = CALL-COUNT
* THEN -- NO OTHER CALLS HAVE BEEN MADE SINCE US--
GO TO
P510-PARENT-LOOP-1
P530-BRANCH-LOOP
P540-BRANCH-METER-LOOP
DEPENDING ON CR-transaction-subtype
ELSE
NEXT SENTENCE.
MOVE CALL-COUNT TO LAST-T12-COUNT.
IF CR-transaction-subtype = 1
* THEN ---WE MUST GET THE PARENT BACK---
MOVE PARENT-P TO PARENT-NUMBER
GO TO P510-PARENT-LOOP-1
ELSE
IF CR-transaction-subtype=2
* THEN ---NEED TO GET PARENT AND BRANCH BACK---
MOVE PARENT-P TO PARENT-NUMBER
FIND PARENT-PO-RECORD RECORD
MOVE BRANCH-P TO BRANCH-NUMBER
FIND BRANCH-PO-RECORD RECORD
GO TO P530-BRANCH-LOOP
ELSE
* --NEED TO GET PARENT, BRANCH, METER---
MOVE PARENT-P TO PARENT-NUMBER
FIND PARENT-PO-RECORD RECORD
MOVE BRANCH-P TO BRANCH-NUMBER
FIND BRANCH-PO-RECORD RECORD
MOVE METER-P TO METER-NUMBER
FIND METER-RECORD RECORD
GO TO P540-BRANCH-METER-LOOP.
P510-PARENT-LOOP-1.
MOVE 0 TO BRANCH-COUNT.
FIND PARENT-PO-RECORD RECORD.
FIND NEXT PARENT-PO-RECORD RECORD OF PARENT-PO-AREA AREA.
IF ERROR-STATUS > 0
* THEN last parent po was found
CLOSE POSTAL-FILE
MOVE 4 TO CR-transaction-SUBTYPE
GO TO S09-RETURN-ROUTINE
ELSE
NEXT SENTENCE.
P520-PARENT-LOOP-2.
GET.
MOVE SPACES TO POSTAL-REC.
MOVE PARENT-NUMBER TO PARENT-P.
P530-BRANCH-LOOP.
MOVE 0 TO METER-COUNT.
FIND NEXT BRANCH-PO-RECORD RECORD OF PARENT-SET SET.
IF ERROR-STATUS > 0
* THEN no more branches for this parent po.
IF BRANCH-COUNT = 0
* THEN ---NO BRANCHES- OUTPUT ONLY PARENT
WRITE POSTAL-REC
MOVE 1 TO CR-transaction-subtype
GO TO DO-THE-RETURN
* GO TO P510-PARENT-LOOP-1
ELSE
GO TO P510-PARENT-LOOP-1
ELSE
NEXT SENTENCE.
GET.
ADD 1 TO BRANCH-COUNT.
MOVE BRANCH-NUMBER TO BRANCH-P.
P540-BRANCH-METER-LOOP.
FIND NEXT METER-RECORD RECORD OF BRANCH-METER-SET SET.
IF ERROR-STATUS > 0
* THEN no more meters for this branch
IF METER-COUNT = 0
* THEN --NO METERS THIS BRANCH--
WRITE POSTAL-REC
MOVE 2 TO CR-transaction-subtype
GO TO DO-THE-RETURN
* GO TO P530-BRANCH-LOOP
ELSE
GO TO P530-BRANCH-LOOP
ELSE
NEXT SENTENCE.
GET.
ADD 1 TO METER-COUNT.
MOVE METER-NUMBER TO METER-P.
MOVE METER-UPDATE-FLAG TO UPDATED-P.
MOVE METER-ACT-RECORDS TO ACT-RECS-P.
* PERFORM P13-FIND-ACTIVITY THRU P15-FIND-ACTIVITY-EXIT
* VARYING ACT-RECS-P FROM 0 BY 1
* UNTIL CR-RETURN-CODE NOT = 0.
FIND OWNER RECORD OF CUSTOMER-METER-SET SET.
IF ERROR-STATUS > 0
* THEN
NEXT SENTENCE
ELSE
GET
MOVE CUSTOMER-NUMBER TO CUSTOMER-P
MOVE CUST-DATE TO DATE-P.
WRITE POSTAL-REC.
MOVE 3 TO CR-transaction-subtype.
GO TO DO-THE-RETURN.
* GO TO P540-BRANCH-METER-LOOP.
********** ***************
* TRANSACTION TYPE 13
*
* FUNCTION: Add a new parent po
*
* Verify that parent does not exist.
* Add parent po.
*
********** ***************
P600-TRANS-CR-T13.
* ADD NEW PARENT PO
MOVE CRB-PARENT-PO-NUMBER TO PARENT-NUMBER.
PERFORM P07-FIND-PARENT-PO THRU P09-FIND-PARENT-PO-EXIT.
IF CR-RETURN-CODE = 8
* THEN
GO TO P610-ADD-PARENT
ELSE
NEXT SENTENCE.
P605.
MOVE 11 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
P610-ADD-PARENT.
PERFORM P1000-MARK-UPDATE-TRANSACTION.
MOVE 0 TO CR-RETURN-CODE.
PERFORM P26-STORE-PARENT-PO THRU P27-STORE-PARENT-PO-EXIT.
P615.
GO TO S09-RETURN-ROUTINE.
********** ***************
* TRANSACTION TYPE 14
*
* FUNCTION: Add a new branch po.
*
* Verify that branch does not exist.
* add branch po.
********** ***************
P700-TRANS-CR-T14.
MOVE CRB-BRANCH-PO-NUMBER TO BRANCH-NUMBER.
PERFORM P10-FIND-BRANCH-PO THRU P12-FIND-BRANCH-PO-EXIT.
IF CR-RETURN-CODE = 5
* THEN did not find it
GO TO P710-ADD-BRANCH
ELSE
NEXT SENTENCE.
P705.
MOVE 12 TO CR-RETURN-CODE.
GO TO S09-RETURN-ROUTINE.
P710-ADD-BRANCH.
PERFORM P1000-MARK-UPDATE-TRANSACTION.
MOVE 0 TO CR-RETURN-CODE
PERFORM P28-STORE-BRANCH-PO THRU P29-STORE-BRANCH-PO-EXIT.
GO TO S09-RETURN-ROUTINE.
****************************************
S09-RETURN-ROUTINE SECTION.
****************************************
P900-CHECK-CODE-CONTROL.
IF CR-RETURN-CODE = ZERO
GO TO S06-RETURN-ROUTINE.
GO TO P45-ERROR-RETURN.
************************************
S13-DELETE-ROUTINES SECTION.
************************************
P900-DELETE-CONTROL-ROUTINE.
P901-DELETE-CHECK.
IF CR-RETURN-CODE = 6 GO TO P902-DELETE-CM.
IF CR-RETURN-CODE = 7 GO TO P904-DELETE-BM.
IF CR-RETURN-CODE = 9 GO TO P905-DELETE-PB.
IF CR-RETURN-CODE = 11 GO TO P906-DELETE-CUST.
IF CR-RETURN-CODE = 12 GO TO P907-DELETE-METER.
P901A-DELETE-CHECK-END.
GO TO P999-DELETE-ROUTINES-EXIT.
P902-DELETE-CM.
EXIT.
P903-DELINK-CUST-METER.
REMOVE METER-RECORD FROM CUSTOMER-METER-SET.
GO TO P999-DELETE-ROUTINES-EXIT.
P904-DELETE-BM.
REMOVE METER-RECORD FROM BRANCH-METER-SET.
GO TO P999-DELETE-ROUTINES-EXIT.
P905-DELETE-PB.
REMOVE BRANCH-PO-RECORD FROM PARENT-SET.
GO TO P999-DELETE-ROUTINES-EXIT.
P906-DELETE-CUST.
DELETE CUSTOMER-RECORD ONLY.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P999-DELETE-ROUTINES-EXIT.
P907-DELETE-METER.
DELETE METER-RECORD ALL.
MOVE ZERO TO CR-RETURN-CODE.
GO TO P999-DELETE-ROUTINES-EXIT.
P999-DELETE-ROUTINES-EXIT.
EXIT.
P1000-MARK-UPDATE-TRANSACTION.
* Here to indicate that the transaction will cause an update
IF THIS-TRANSACTION-UPDATES = 'N'
* THEN ---WE HAVE NOT BEEN HERE BEFORE---
MOVE 'Y' TO THIS-TRANSACTION-UPDATES
MOVE CORRESPONDING CR-user-information TO
TRANSACTION-ID
EXAMINE TRANSACTION-ID REPLACING ALL SPACES BY '-'
ADD 1 TO TRANSACTION-COUNT
MOVE CR-transaction-number to TI-user-transaction-type
ENTER MACRO JSTRAN USING TRANSACTION-ID, TRANSACTION-COUNT
ELSE
NEXT SENTENCE.
P1000-MARK-TRANSACTION-EXIT. EXIT.