Trailing-Edge
-
PDP-10 Archives
-
BB-4157F-BM_1983
-
fortran/compiler/main.bli
There are 13 other files named main.bli in the archive. Click here to see a list.
!THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY ONLY BE USED
! OR COPIED IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE.
!COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1973, 1983
!AUTHOR: F. INFANTE /FI /HPW /DBT/SJW/EGM/SRM/PLB/TFV/CDM
MODULE MAIN(RESERVE(0,1,2,3),SREG=#17,VREG=#15,FREG=#16,DREGS=4,LOWSEG,GLOROUTINES)=
BEGIN
GLOBAL BIND MAINV = 7^24 + 0^18 + #1710; ! Version Date: 5-Jan-83
%(
***** Begin Revision History *****
24 ----- ----- CHANGE THE GETSEGMENT CODE INTO A ROUTINE.
ADD ROUTNINE NXFILG WHICH WHEN CALLED FROM
PHAZ1, WILL GET FORTRA AND THEN CALL NXTFIL TO
OPEN THE NEXT INPUT FILE. IT THEN RETURNS TO
PHAZ1. THIS ALLOWS PHZA1 TO CONCATINATE
INPUT FILES IF THE USER DESIRES.
25 ----- ----- SAVE STACK POINTERS BEFORE CALL TO MRP1 SO
THAT IF A RETURN TO MRP1 IS NOT NECESSARY ONE
CAN RETURN DIRECTLY TO COMMAN
26 ----- ----- ADD CODE TO PRINT OUT END OF PROGRAM AND END
OF COMPILATION MESSAGES WHEN THE RETURN TO PHAZ1
IS SKIPPED.
27 ----- ----- OUTPUT ERROR CODE FOR GETSEG FAILURES
28 ----- ----- REMOVE FT1SEQ SWITCH SETTING - NOW FROM IOFLG
29 467 VER5 REMOVE 28: REQUIRE FT1SEG.REQ
***** Begin Version 6 *****
30 1047 EGM 22-Jan-81 Q10-05325
Add support for TOPS-10 execute only.
31 1117 EGM 26-Aug-81 --------
Remove restriction that high segs start at 400010.
***** Begin Version 7 *****
32 1460 SRM 18-Jan-82
If character data is used, do not optimize.
( This restriction will be removed later. )
33 1500 SRM 11-Feb-82
Do not give the CHO warning message here. Instead wait until
get into FORTC to issues the message. This is necessary
because on the -10 this module is loaded with every overlay.
If an error message is given from this module, that message
must go into every overlay's error file or the -10 build
will not complete successfully.
1600 PLB 21-Jun-82
Remove unused routine SIXBOUT created in edit 1047. Removed
during TOPS-20 nativization since it contained an OUTCHR.
1633 TFV 1-Sep-82
Improve /STATISTICS to get times by compiler phase.
1650 CDM 18-Oct-82
Install copyright notice into compiler memory image.
1710 CDM 6-Jan-83
Update compiler memory image copyright notice.
***** End Revision History *****
)%
%1650% ! Copyright notice for this compiler. This will apear in the
%1650% ! memory image and the .EXE files.
%1650%
%1710% GLOBAL BIND COPYRIGHT = UPLIT(ASCIZ '?M?J?M?JCOPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1983?M?J?M?J');
%1633% REQUIRE FTTENX.REQ; ! needed for /STATISTICS
REQUIRE FT1SEG.REQ;
REQUIRE IOFLG.BLI;
LINKAGE FORLINK = ENTXIT (FORI,FORO);
FORWARD
NXFILG,
GETSG,
%1633% PHASBEGIN, ! Start timer for this phase
%1633% PHASEND, ! Collect phase time
%1633% RNTIME; ! Returns runtime
REGISTER
T1=1,
T2=2,
C=3;
EXTERNAL
AHEAD,
%1460% CHARUSED,
%1633% PBTIME, ! Runtime at the beginning of this phase
%1633% PHTIME, ! Vector of runtimes per phase
SAVE17,
%1633% SEGINCORE, ! Current phase
TTCHAR,
ZMAKEX;
OWN SVV17,SVV16; !LOCATIONS TO SAVE THE STACK POINTERS INORDER TO
!SKIP THE RETURN TO MRP1 IF NOT NECESSARY
MACHOP TTCALL =#051, CALLI = #047, TDZA = #634,JFCL = #255;
!********************************************************************
!THESE TWO SETS OF BINDS GO TOGETHER AND ESTABLISH THE CORRESPONDENCE
!BETWEEN THE NAMES OF THE PHASES AND THE NAMES OF THE
!SEGMENTS FOR THE GETSEG UUO.
BIND PHAZNAME = PLIT(SIXBIT'FORTRA', !P0-0 COMMAND SCANNER
SIXBIT'FORTB', !P1-1 SYNTAX +LEXICAL+SEMANTICS
SIXBIT'FORTC', !P2S-3 PHAZ2 SKELETON
SIXBIT'FORTD', !P2-2 OPTIMIZER
SIXBIT'FORTE', !P3G-4 GLOBAL OPT REGISTER ALLOCATOR
SIXBIT'FORTF', !P3R-5 LOCAL REGISTER ALLOCATOR
SIXBIT'FORTG') !P3-6 CODE GENERATOR
;
BIND PNAMES = PLIT(PLIT ASCIZ'FORTRA', !P0-0 COMMAND SCANNER
PLIT ASCIZ'FORTB', !P1-1 SYNTAX +LEXICAL+SEMANTICS
PLIT ASCIZ'FORTC', !P2S-3 PHAZ2 SKELETON
PLIT ASCIZ'FORTD', !P2-2 OPTIMIZER
PLIT ASCIZ'FORTE', !P3G-4 GLOBAL OPT REGISTER ALLOCATOR
PLIT ASCIZ'FORTF', !P3R-5 LOCAL REGISTER ALLOCATOR
PLIT ASCIZ'FORTG') !P3-6 CODE GENERATOR
;
BIND P0=0,
P1=1,
P2S=2,
P2=3,
P3G=4,
P3R=5,
P3=6;
!*********************************************************************
MACRO SERRORS = FLGREG<1,1>$,
SSYNTAX = FLGREG<20,1>$,
SOPTIMIZ= FLGREG<0,1>$,
SAVREGS = BEGIN
REGSAV[15] _ .(#17)<0,36>;
#17<0,36> _ REGSAV<0,0>;
BLT(#17,REGSAV[14])
END$,
RESREGS = BEGIN
#17<0,36> _ (REGSAV<0,0>)^18;
BLT(#17,#17)
END$;
EXTERNAL NUMFATL,NUMWARN; !FATAL AND WARNING ERROR COUNTS
EXTERNAL REGSAV[16], !FOR SAVING REGISTERS FOR GETSEG
ENTRY,
ERROUT,
SEGINCORE, !HOLDS CURRENT IN CORE SEGMENT NUMBER
GETSBLOK[6]; !THE GETSEG DATA BLOCK
!
EXTERNAL JOBSA;
!
%[1117]% EXTERNAL HISEG; ! Common high seg entry point
!
EXTERNAL MRP0, !PHAZE 0 MAIN ROUTINE
MRP1, !PHAZE 1 MAIN ROUTINE
MRP2S, !PHAZE 2S MAIN ROUTINE
MRP2, !PHAZE 2 MAIN ROUTINE
MRP3R, !PHAZE 3R MAIN ROUTINE
MRP3G, !PHAZE 3G MAIN ROUTINE
MRP3; !PHAZE 3 MAIN ROUTINE
!
MACRO REED =(TTCALL(4,VREG); .VREG)$;
!
!THE FOLLOWING ROUTINE CONTROLS THE COMPILATION PROCESS FROM ONE PHASE TO THE NEXT
!EACH PHASE, WHEN IT FINISHED ALL IT CAN DO TO THE PROGRAM,CALLS THE
!NEXT PHASE OF THE COMPILER BY RETURNING TO THE ROUTINE PHAZCONTROL
!WITH THE PHASE NUMBER OF ITSELF IN THE GLOBAL
!VARIABLE SEGINCORE. FOR EXAMPLE IF WE ARE IN PHASE 1 SYNTAX THEN TO
!CALL THE NEXT PHASE: SEGINCORE _ 1; PHAZCONTROL();
!IF THE GETSEG FOR THE NEXT PHASE IS COMPLETED THEN
!THE NEXT PHASE WILL BEGIN EXECUTING. THE CALLING ROUTINE SHOULD
!NOT CALL THE NEXT PHASE IF IT HAS ENCOUNTERED ERRORS IN THE PROGRAM
!WHILE PERFORMING ITS TASK. THUS, PHASE 1 SHOULD NOT
!CALL THE NEXT PHASE IF THERE ARE SYNTAX ERRORS OR IF ONLY SYNTAX
!CHECKING WAS REQUESTED BY THE USER.
%[1047]% ROUTINE FORLINK PHAZCONTROL= !CONTROLS THE CALLING OF THE COMPILER SEGMENTS
BEGIN
EXTERNAL CTCSTART,CCLSW;
BIND JOBSYM = #116, JOBUSY = #117;
%1460% EXTERNAL TURNOFFOPT; !Flag for /OPT turned off for 1 subroutine
! because it had character data
MACRO TPHAZ = T1$;
%1633% PHASEND(); ! Collect time for this phase
WHILE 1 DO
BEGIN
CASE .SEGINCORE OF SET
%(IN PHASE 0)% !GET PHASE 1 SYNTAX
BEGIN ! In phase 0
IF FT1SEG EQL 0
THEN
BEGIN ! Multi-segment compiler
JOBSYM<0,36> _ 0;
JOBUSY<0,36> _ 0;
END; ! Multi-segment compiler
TPHAZ _ P1;
END; ! In phase 0
%(IN PHASE 1)%
BEGIN ! In phase 1
IF FT1SEG EQL 0
THEN
BEGIN !Multi-segment Compiler
JOBSYM<0,36> _ 0;
JOBUSY<0,36> _ 0; !CLEARING BAD DDT INFORMATION
END; !Multi-segment compiler
%1460%
%1460% IF .SOPTIMIZ
%1460% THEN
%1460% BEGIN !/OPT was specified
%1460% ! Ignore /OPT for subprograms that use character data
%1460% IF .CHARUSED
%1460% THEN
%1460% BEGIN ! Turn-off-OPT
%1500%
%1460% ! Turn off the /OPT flag but remember that
%1460% ! have done so
%1500% ! (Note that warning message that this
%1500% ! has occurred will be given from MRP2S)
%1460% TURNOFFOPT = -1;
%1460% SOPTIMIZ = 0;
%1460%
%1460% TPHAZ _ P2S;
%1460% END !Turn-off-OPT
%1460% ELSE
%1460% TPHAZ _ P2;
%1460% END !/OPT was specified
%1460% ELSE !/OPT was not specified
%1460% TPHAZ_P2S;
END; ! In phase 1
%(IN PHASE 2S)%
TPHAZ _ P3R;
%(IN PHASE 2)%
TPHAZ _ P3G;
%(IN PHASE 3G)%
TPHAZ _ P3;
%(IN PHASE 3R)%
TPHAZ _ P3;
%(IN PHASE 3)%
%1460% BEGIN !In P3
%1460%
%1460% !If turned off /OPT, turn it on again
%1460% IF .TURNOFFOPT
%1460% THEN
%1460% BEGIN
%1460% TURNOFFOPT = 0;
%1460% SOPTIMIZ = 1;
%1460% END;
%1460%
%1460% TPHAZ _ P1;
%1460% END; !In P3
%(IN PHASE 1 AND RETURNING TO PHASE 0)%
TPHAZ _ P0;
%(CALL FROM CTCSTART)%
TPHAZ _ P0
TES;
%CHECK FOR RETURN TO MRP1 - RETURN TO COMMAN IF ITS NOT
NECESSARY %
IF .SEGINCORE EQL P3
THEN
BEGIN % WE SHOULD RETURN TO MRP1%
IF .FLGREG<ENDFILE>
THEN
BEGIN %SKIP THE RETURN%
EXTERNAL ENDUNIT;
SREG _ .SVV17;
FREG _ .SVV16;
%[1047]% IF FT1SEG EQL 0
%[1047]% THEN GETSG(P0) ! Get the segment
%[1047]% ELSE GETSBLOK[1] _ .PHAZNAME[P0]; ! Remember the name
SEGINCORE _ P0;
ENDUNIT(); !OUTPUT END OF PROG UNIT MESAGE
%1633% PHASBEGIN(); ! Start clock for this phase
RETURN
END
ELSE
BEGIN %RETURN TO MRP1%
%[1047]% IF FT1SEG EQL 0
%[1047]% THEN GETSG(P1) ! Get the segment
%[1047]% ELSE GETSBLOK[1] _ .PHAZNAME[P1]; ! Remember the name
SEGINCORE _ P1;
%1633% PHASBEGIN(); ! Start clock for this phase
RETURN
END
END;
!
! DO GETSEG IF MULTI-SEGMENT COMPILER
!
![1047] Get the segment (if multi-seg) and always remember the segment name
%[1047]% IF FT1SEG EQL 0 THEN GETSG(.TPHAZ) ELSE GETSBLOK[1]_.PHAZNAME[.TPHAZ];
!
JOBSA<0,18> _ CTCSTART<0,0>;
!FOR ^C .START EVENTUALITY
%CHECK FOR RETURN TO COMMAN%
IF .SEGINCORE EQL (P3+1)
THEN
BEGIN
SEGINCORE _ 0;
%1633% PHASBEGIN(); ! Start clock for this phase
RETURN
END;
SEGINCORE _ .TPHAZ;
IF .TPHAZ EQL P1
THEN %SAVE STACK% ( SVV17 _ .SREG; SVV16 _ .FREG);
%1633% PHASBEGIN(); ! Start clock for this phase
!
! START THE NEXT SEGMENT
!
IF FT1SEG EQL 0 THEN !MULTI SEGMENT START
%[1117]% HISEG() !Start the next phase
ELSE !SINGLE SEGMENT START
CASE .TPHAZ OF SET !CALL MAIN ROUTINE
MRP0(); !PHAZE 0
MRP1(); !PHAZE 1
MRP2S(); !PHAZE 2S
(SAVE17_.SREG<0,36>+#1000001;MRP2()); !PHAZE 2
MRP3G(); !PHAZE 3G
MRP3R(); !PHAZE 3R
MRP3() !PHAZE 3
TES;
!
%1633% PHASEND(); ! Collect time for this phase
IF .SEGINCORE EQL P1 THEN SEGINCORE _ (P3+1) !DO THIS ONLY IF A RETURN TO THE COMMAND SCANNER IS NEEDED
ELSE
%QUIT IF ERRORS WERE DETECTED%
IF .NUMFATL NEQ 0 THEN SEGINCORE _ P3;
!
!PHASES 2,2S AND 3 ALL RETURN HERE AFTER COMPLETING THEIR COMPUTATIONS
!THEY DO NOT CALL PHAZCONTRO DIRECTLY BUT MERELY FALL BACK (POPJ 17,0)
!SINCE THEY WERE CALLED BY PHAZCONTROL ITSELF
!ONLY PHASE0 AND PHASE1 CALL THE NEXT PHASES BY DIRECT CALL TO PHAZCONTROL
!
END !0F WHILE 1 DO
END;
%[1047]% ROUTINE FORLINK GETSG( TPHAZ ) =
BEGIN
IF FT1SEG EQL 0 THEN
BEGIN
!THE REST OF THE GETSEG ARGS ARE SET IN MODULE COMND
GETSBLOK[1] _ .PHAZNAME[.TPHAZ];
!FIRST LET'S GET RID OF THE UNWANTED HISEG
!
VREG _ 1^18;
CALLI(VREG,#11); !CORE UUO TO DELETE THE HISEG
JFCL(0,0);
!NOW LET'S DO THE GETSEG
!FIRST WE MUST SAVE ALL REGISTERS
SAVREGS;
!NOW LET'S TRY THE GETSEG
VREG_GETSBLOK<0,0>; !START ADDRESS OF GETSEG BLOCK
CALLI(VREG,#40); !GET THE SEGMENT
TDZA(T2,T2); !T2 FALSE IF GETSEG FAILS
T2_1; !T2 TRUE IF GETSEG SUCCEEDS
!IN EITHER CASE, WE MUST! RESTORE ACS BEFORE TRYING ANYTHING FANCE
IF .T2 THEN RESREGS
ELSE !TYPE OUT AN ERROR MESSAGE AND EXIT
!NOTE THAT WE TYPE OUT THE MESSAGE OURSELVES RIGHT
!HERE RATHER THAN CALLING ROUTINE ERROUT. WE DO THIS
!BECAUSE IT IS POSSIBLE FOR A GETSEG TO FAIL IN SUCH
!A MANNER THAT NO VALID HIGH SEGMENT WILL BE AVAILABLE.
!SINCE ERROUT LIVES IN THE HIGH SEGS, WE MIGHT NOT
!BE ABLE TO ACCESS IT; SO WE OUTPUT THE ERROR MESSAGE
!FROM HERE VIA TTCALL.
BEGIN
%SAVE ERROR CODE%
GETSBLOK[5] _ 0;
GETSBLOK[5]<29,7> _ .VREG<3,3> + "0";
GETSBLOK[5]<22,7> _ .VREG<0,3> + "0";
RESREGS;
TTCALL(3,PLIT ASCIZ '??FTNNGS - CANNOT GET SEGMENT ');
TTCALL(3,.PNAMES[.TPHAZ]);
TTCALL(3,PLIT' - ERROR CODE:?0');
TTCALL(3,GETSBLOK[5]);
TTCALL(3,PLIT ASCIZ '?M?J');
CALLI (1,#12) !DON'T DESTROY OLD FILES
END;
END; !END OF FT1SEG CONDITIONAL
END; !GETSG
%[1047]% GLOBAL ROUTINE FORLINK NXFILG =
BEGIN
% THIS ROUTINE WILL GET FORTRA BACK AND REQUEST THE NEXT INPUT
FILE FROM IT AND THEN RETURN< TO FORTB %
EXTERNAL NXTFIL;
GETSG(P0); !GET FORTRA
NXTFIL(); !GET NEXT INPUT FILE
FLGREG<ENDFILE> _ 1; !NXTFIL DOES A SKIP RETURN IF IT FINDS A
!FILE SO THIS WILL NOT BE SET UNLESS NO FILE
!IS FOUND
GETSG(P1); !GET FORTB BACK
END;
%[1047]% ROUTINE FORLINK CTCSTART = !ENTER HERE AFTER ^C START
BEGIN
SEGINCORE _ P3+2; !SIMULATE IN PHASE 6
PHAZCONTROL()
END;
ROUTINE PHASBEGIN=
BEGIN
%1633% ! Written by TFV on 1-Sep-82
! Setup runtime for this phase
PBTIME = RNTIME();
END; ! of PHASBEGIN
ROUTINE PHASEND=
BEGIN
%1633% ! Written by TFV on 1-Sep-82
! Collect runtime for this phase
REGISTER ETIME;
ETIME = RNTIME(); ! Get current runtime
! Add it to this phase
PHTIME[.SEGINCORE] = .PHTIME[.SEGINCORE] + .ETIME - .PBTIME;
END; ! of PHASEND
ROUTINE RNTIME=
BEGIN
%1633% ! Written by TFV on 1-Sep-82
! Returns runtime
MACHOP CALLI=#047,JSYS=#104; ! For MSTIME, RUNTIM, RUNTM
REGISTER
NUM,
AC1=1,AC2=2,AC3=3;
LOCAL
RSV[3];
NUM _ 0;
IF FTTENEX
THEN
BEGIN ! TOPS-20
RSV[0] _ .AC1; ! Save AC1
RSV[1] _ .AC2; ! Save AC2
RSV[2] _ .AC3; ! Save AC3
AC1 _ #400000; ! Fork is .FHSLF
JSYS(0,#15); ! RUNTM JSYS
NUM _ .AC1; ! Run time is in AC1
AC1 _ .RSV[0]; ! Restore AC1
AC2 _ .RSV[1]; ! Restore AC2
AC3 _ .RSV[2]; ! Restore AC3
END
ELSE NUM _ CALLI(NUM,#27); ! RUNTIM UUO for TOPS-10
RETURN .NUM
END; ! of RNTIME
END
ELUDOM