Trailing-Edge
-
PDP-10 Archives
-
AP-D543V_SB
-
fgen.hlp
There are 11 other files named fgen.hlp in the archive. Click here to see a list.
FGEN.HLP V1076 - AUXILIARY HELP FILE FOR FGEN DIALOGUE 13 JUN 78
;COPYRIGHT (C) 1969,1970,1971,1972,1973,1974,1975,1976,1977,1978 BY DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
SEE THE HELP SECTION FOR HELP.
HELP ;ENTRIES HAVE THE FORM
<TERMINATOR><IDENTIFIER><TAB><TEXT><TERMINATOR>
<TERMINATOR> IS CURRENTLY CONTROL-A
<IDENTIFIER> IS "HEADER" FOR THE F.MAC FILE HEADER, INCLUDING
DEFINITIONS OF XP MACRO, ETC.
<IDENTIFIER> IS "HELP" FOR THIS SECTION.
<IDENTIFIER> IS FTXXXX(SYSTEM,SYSTEM,...) TO SPECIFIY A FEATURE TEST SWITCH.
EACH SYSTEM FOR WHICH THE SWITCH IS TO BE ON AS THE DEFAULT IS LISTED
IN THE PARENTHESES FOLLOWING THE SWITCH NAME, I.E. 1040,1050,...,1070,...
FOR EXAMPLE, FTSWITCH(1050,1055)
<TAB> NOTES THE END OF THE IDENTIFIER.
<TEXT> IS ANY ASCII STRING UP TO THE NEXT TERMINATOR AND IS ASSOCIATED
WITH THE IDENTIFIER. IT WILL BE USED APPROPRIATELY BY MONGEN.
THE FGEN DIALOGUE IN MONGEN FIRST ASKS WHAT TYPE OF SYSTEM IS BEING BUILT
AND THEN SCANS FGEN.HLP AND BUILDS A TABLE OF SWITCHES AND THEIR DEFAULT VALUES.
THE TEXT MAY BE USED IN EXPLAIN MODE TO EXPLAIN THE USAGE OF FEATURE TEST
SWITCHES, AND IS INCLUDED AS COMMENTS IN THE RESULTING F.MAC OUTPUT FILE.
FGEN.HLP IS READ FROM THE SAME DIRECTORY FROM WHICH MONGEN WAS RUN. IF NO
SUCH FILE EXISTS, DEVICE SYS: IS USED. IF NO SUCH FILE EXISTS, FGEN
HAS NO INFORMATION ABOUT FEATURE TEST SWITCHES.
HEADER ;COPYRIGHT (C) 1969,1970,1971,1972,1973,1974,1975,1976,1977,1978 DIGITAL EQUIPMENT CORP., MAYNARD, MASS.
;This universal file is assembled before each MONITOR module. This file
; must be assembled before any MONITOR modules are assembled, however,
; it need be assembled only once regardless of the number of MONITOR
; modules which follow. Example:
;
; .COMPILE F.MAC/COMPILE,S.MAC/COMPILE,FILIO,FILFND,FILUUO,SCNSER
;
;The files F.REL and S.REL are not needed and may be discarded.
;List of independent MONITOR COMMAND features
;These features can be eliminated from a system by
;setting the appropriate FTXXXX symbol below to 0
; and reassembling those routines in which code for the
; feature appears. The routines affected by each feature
; are listed below. To guarantee that no routines are
; missed, FTXXXX is defined to be an INTERNAL in those routines
; in which it is used in conditional assembly. Thus LINK
; will detect multiple defined GLOBALS if not
; all routines affected have been reassembled.
DEFINE XPP(A,B) ;SYSTEM PARAMETER WHICH WILL PRINT-OUT FROM DDT
<A=B
INTERN A>
DEFINE XPL(A,B) ;LOCAL PARAMETER WHICH WILL PRINT-OUT FROM DDT
<A=B>
DEFINE XP(A,B) ;SYSTEM PARAMETER WHICH WILL NOT PRINT FROM DDT
<A==B
INTERN A>
FTTIME(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;TIME ACCUMULATION[
;MONITOR COMPUTES TOTAL CPU RUN TIME USED BY EACH JOB]
FTATTACH(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;ATTACH AND DETACH TTY TO JOB COMMANDS[
;AND CSTART AND CCONTINUE COMMANDS]
FTTALK(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;SEND COMMAND FOR TTY'S
FTEXAMINE(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;EXAMINE AND DEPOSIT COMMANDS
FTREASSIGN(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;REASSIGN COMMAND
FTRTTRP(KAFULL,KIFULL,KLFULL) ;
;REAL TIME TRAPPING UUO
FTHPQ(KAFULL,KIFULL,KLFULL) ;
;HIGH PRIORITY QUEUE FEATURE
FTHIBWAK(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;HIBERNATE/WAKE FEATURE
FTTRPSET(KAFULL,KIFULL,KLFULL) ;
;USER I/O - TRPSET,TRPJEN UUOS AND OPCODE 100 (PDP-10'S ONLY)
FTSLEEP(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;SLEEP UUO
FTFINISH(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;FINISH COMMAND
FTCHECK( ) ;
;MONITOR CHECKSUMMING
FTMONP( ) ;
;MONITOR WRITE PROTECTED BETWEEN 1000 AND 20000
FTMOUN(KAFULL,KIFULL,KLFULL) ;
;REMOVABLE DISK PACK UUO'S (STRUUO FUNCTIONS .FSDEF,.FSRDF,.FSREM,.FSLOK)
FTLOCK(KAFULL,KIFULL,KLFULL) ;
;LOCK UUO FEATURE[
;ALLOWS JOBS TO LOCK THEMSELVES IN CORE]
FTRCHK(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;ASSEMBLE WITH REDUNDANT CHECKING FOR INTERNAL MONITOR ERRORS.
; HALT IF AN ERROR IS DETECTED
; CONTINUE WILL LOOP (IF NON-RECOVERABLE ERROR) OR TRY TO RECOVER.
; OPERATOR SHOULD MAKE NOTE OF MEMORY ADDRESS REG (LOC+1 OF HALT)
FTHALT(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;MONITOR HALTS WHEN IT DETECTS AN ERROR IN ITSELF INSTEAD OF PRINTING
; A MESSAGE WHEN IT DETECTS AN ERROR. USED FOR DEBUGGING SO A
; DUMP CAN BE TAKEN. CONTINUE SWITCH WILL CAUSE USUAL ERROR MESSAGE
; TO BE PRINTED. AC U HAS JSP U,ERROR IN IT ON HALT.
FTTRACK(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;MONITOR LEAVES USEFUL INFORMATION IN LOCATIONS IN COMMON.
; NOT NEEDED EXCEPT FOR LEAVING TRACKS TO AID IN DEBUGGING CRASHES.
FT2REL(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;SUBROUTINE CALLS TO SEGCON FOR TWO RELOCATION REGISTER CAPABILITY.
; -1 FOR PDP-6 AND PDP-10. SEGCON IS EITHER A DUMMY SET
; OF SUBROUTINES OR THE REAL THING DEPENDING ON THE MACHINE.
; THOSE CUSTOMERS WITHOUT 2 REG MACHINES WHO WANT TO ELIMINATE THE
; 70 OR SO LOCS OF SUBROUTINE CALLS TO SEGCON, CAN DO SO BY
; REASSEMBLING THE MONITOR WITH FT2REL=0. HOWEVER, DEC WILL ALWAYS
; DISTRIBUTE MONITORS WITH FT2REL=-1 (PDP-6 AND PDP-10).
FTKCT(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;ACCUMULATE THE PRODUCT OF <CORE>*<RUNNING TIME> FOR THOSE
; INSTALLATIONS WHICH USE THIS QUANTITY IN CHARGING EACH USER
FTGETTAB(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;GETTAB UUO - RETURN CONTENTS OF MONITOR JOB TABLES
FTMEMPAR(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;ASSEMBLES MEMORY PARITY ERROR RECOVERY ROUTINE[
;IF OFF, MONITOR HALTS ON MEMORY PARITY ERRORS]
FTWATCH(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;WATCH COMMAND FOR SYSTEM RESPONSE DATA
FTUNAME(KAFULL,KIFULL,KLFULL) ;
;USER NAME TABLES
FTCNO(KAFULL,KIFULL,KLFULL) ;
;CHARGE NUMBER TABLES
FTSEDAT(KAFULL,KIFULL,KLFULL) ;
;IMPLEMENTS SET DAYTIME & SET DATE COMMANDS
FTTLIM(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;IMPLEMENTS TIME LIMIT CODE AND OTHER BATCH FEATURES
FTBCOM( ) ;
;IMPLEMENTS BATCH ONLY COMMANDS
FTRSP(KAFULL,KIFULL,KLFULL) ;
;MEASURE USER TTY INPUT RESPONSE TIMES
FTTMP(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;TMPCOR CODE
FTDAEM(KAFULL,KIFULL,KLFULL) ;
;DAEMON CODE
FTPRV(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;PRIVILEGE CHECKING CODE
FTSPL(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;SPOOLING CODE
FTMS(KAFULL,KIFULL,KLFULL) ;
;LINKAGE IN CASE MULTIPROCESSING OPTION WANTED
; AT MONGEN TIME. WORKS LIKE FT2REL. SLVSER IS LOADED
; IF ANSWER YES, ELSE COMMON DECLARES INTERNS.
; THIS FEATURE SWITCH AFFECTS MACROS CPLOCK, CPUNLK, SBLOK
FTSFD(KAFULL,KIFULL,KLFULL) ;
;ALLOW DISK SUB-FILE-DIRECTORIES
FTVERS(KAFULL,KIFULL,KLFULL) ;
;VERSION WATCH, ETC.
FTEL(KAFULL,KIFULL,KLFULL) ;
;DAEMON ERROR LOGGING
FTPHYO(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;PHYSICAL DEVICE ONLY UUO'S
FT5UUO(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;RANDOM 5-SERIES UUO'S
FTOPRERR(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;TYPE DEVICE ERROR MESSAGES TO OPERATOR AS WELL AS USERS
; ALSO INCLUDES ERROR INTERRUPT CODE
FTJCON(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;JOB CONTINUE CODE
FTPOKE(KAFULL,KIFULL,KLFULL) ;
;POKE UUO
FTLPTRBL(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;NEW LPT TROUBLE RECOVERY CODE
FTCRTRBL(KAFULL,KIFULL,KLFULL) ;
;NEW CDR TROUBLE RECOVERY CODE
FTCPTRBL(KAFULL,KIFULL,KLFULL) ;
;NEW CDP TROUBLE RECOVERY CODE
FTMTSET(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CODE TO SET MTA DENSITY AND BUFFER SIZE
FTSET(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;SET COMMANDS AND UUO'S[
;IF OFF, SCHEDULE COMMAND MAY BE USED TO SET SCHED]
FTCDRSI(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CDR SUPER-IMAGE MODE CODE
FT2SWP(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CODE TO ALLOW SWAPPING ON MORE THAN ONE UNIT
FTSTR(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;ALLOW MORE THAN ONE FILE STRUCTURE.[
;IF 0, MONITOR WILL ALLOW EXACTLY ONE FILE STRUCTURE.]
FTDOPT(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;DISK LATENCY OPTIMIZATION CODE
FTDBAD(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CODE TO RECOVER WHEN DISKS GO OFF-LINE
FTDHNG(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CODE TO RECOVER FROM HUNG DISKS
FTDQTA(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;DISK QUOTA CHECKING
FTDSTT(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;DISK I/O STATISTICS
FTDSUP(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;DISK SUPER USETI/USETO CODE
FTDALC(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;FANCY DISK ALLOCATION CODE
FTDSMC(TINY) ;
;MAKE SMALLER ALLOCATIONS FOR DISK CORE BLOCKS, ETC.
FTDMRB(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;MULTIPLE RIB CODE - ALLOW DISK FILES TO BE LONGER
; BY HAVING MORE THAN ONE RIB, I.E. EXTENDED RIBS.
FTDSEK(KAFULL,KIFULL,KLFULL) ;
;SEEK UUO
FTDETS(KAFULL,KIFULL,KLFULL) ;
;DISK ERROR SIMULATING CODE FOR TESTING ERROR RECOVERY
FTDUFC(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;DISK UFD COMPRESSOR TO KEEP FILES IN THE UFD
; IN THE ORDER THEY WERE CREATED
FTDRDR(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;DISK RENAME FILES ACROSS DIRECTORY CODE.
; IF OFF, AN ATTEMP TO CHANGE A FILE'S DIRECTORY WITH A RENAME WILL GIVE
; A PROTECTION ERROR.
FTDBBK(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CODE TO MARK BAD DISK BLOCKS IN THE BAT BLOCKS
; AND TO MARK THE APPROPRIATE BITS IN SAT BLOCKS AS IN USE
FTWHY(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;ASK OPERATOR WHY RELOAD IN ONCE
FTMETR(KAFULL,KIFULL,KLFULL) ;
;METER UUO FOR PERMORMANCE ANALYSIS
FTRTC(KAFULL,KIFULL,KLFULL) ;
;REAL TIME CLOCK (DK10) SERVICE
FTPI(KAFULL,KIFULL,KLFULL) ;
;INCLUDE CALLS TO PSISER
; PROGRAMED SOFTWARE INTERRUPT SERVICE. THIS MODULE IS SELECTED
; AT MONGEN TIME SO THIS FEATURE TEST ONLY SAVES A FEW PUSHJ'S
FTRDX(KIFULL,KLFULL) ;
;INCLUDE REMOTE DATA ENTRY SERVICE
FTNET(KAFULL,KIFULL,KLFULL) ;
;INCLUDE NCL NETWORK SOFTWARE
FTCMSR(KAFULL,KIFULL,KLFULL ) ;
;INCLUDE COMMUNICATIONS MEASUREMENT CODE
;*** TURN OFF BEFORE 6.03 RELEASE ***
FTTSK(KAFULL,KIFULL,KLFULL) ;
;TASK TO TASK COMMUNICATION FEATURE
FTMSGSER(KAFULL,KIFULL,KLFULL) ;
;INCLUDE CALLS TO MSGSER
; THIS IS ONLY A FEW PUSHJ'S IF MSGSER IS NOT LOADED.
FTQCOM(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;QUEUE COMMANDS
FTCCLX(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;EXTRA CCL COMMANDS
; LIKE TECO, DIRECT, DELETE, ETC.
FTBOOTRD(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CODE TO READ BOOTS FROM DISK AFTER A CRASH
; IF 0, MONITOR WILL ALWAYS HALT AFTER CRASH CODE
FTSWPERR(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;NEW SWAP READ ERROR RECOVERY CODE
FTKII(KAFULL) ;
;CHECK FOR KI INSTRUCTION FOR BETTER ILLEGAL INSTRUCTION MESSAGE
FTPEEKSPY(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;PEEK AND SPY UUOS
FTGSRC(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;GENERIC DEVICE SEARCH CODE
FTPATT(KAFULL,KIFULL,KLFULL) ;
;SPACE TO PATCH TABLES
FTPTYUUO(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;NEW UUOS TO DRIVE PTY JOBS (JOBSTS AND CTLJOB UUOS)
FTCCIN(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;CONTROL C INTERCEPT CODE TO ALLOW
; PROGRAMS WITH APPROPRIATE PRIVILEGES TO
; TRAP CONTROL C INTERRUPTS VIA JOBINT BLOCK
FTFFRES( ) ;
;INTERLOCK AROUND ALL OF FNDFIL IN FILSER.
; ONLY NEEDED IN MONITORS PRIOR TO 5.06. IN 5.06 IT SHOULD
; BE LEFT ZERO.
FTHDPX(KAFULL,KIFULL,KLFULL) ;
;CODE IN SCNSER TO SUPPORT CERTAIN
; HALF DUPLEX TERMINALS LIKE CERTAIN TWX, ETC.
FTGPO2B( ) ;
;CODE IN SCNSER TO SUPPORT
; GPO 2B MODEMS FOR UK TELEPHONE LINE INTERFACES.
FT630H( ) ;
;SINGLE-SCANNER 630 CODE
FTMODM(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;MODEM CONTROL CODE IN SCNSER
FTSCNR(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;SET IF HAVE A DC10 OR DC68 OR BOTH, NOT IF NEITHER
FTSCLC(KAFULL,KIFULL,KLFULL) ;
;SCANNER SPECIAL LINE CONTROL[
;ALLOWS 680 SYSTEM TO SPECIFY SPECIAL HANDLING FOR SOME LINES,
;E.G. SUPPRESS FORCED CHARACTER OUTPUT FOR HUNG LINES.]
FTTVP( ) ;
;SCNSER CODE TO SUPPORT FANCY VERTICAL POSITIONING
FTCAFE(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;SUPPORT THE DC76
; COMPREHENSIVE ASYNCHRONOUS FRONT END
FT2741(TINY,KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;INCLUDE 2741 SUPPORT
FTTYPE( ) ;
;SPECIAL FEATURES FOR TYPESET-10
; FRONT END PROCESSOR. FTCAFE MUST BE TURNED ON TO USE THIS
; FEATURE.
FTSHFL(TINY,KALUG,KAFULL) ;
;CORE SHUFFLER CALLED FROM SWAPPER TO
; MOVE JOBS IN CORE TO MAKE ROOM INSTEAD OF
; ALWAYS SWAPPING OUT ENOUGH JOBS
FTDIAL(KAFULL,KIFULL,KLFULL) ;
;CODE TO DRIVE AUTOMATIC DIALLER
; MUST BE OFF IF FTMODM IS OFF
FTAPLB(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;APPEND TO LAST BLOCK OF A FILE[
;IF 0, MUST WRITE A NEW BLOCK TO APPEND TO A FILE WHOSE PROTECTION =4]
FTCTY1(KAFULL,KIFULL,KLFULL) ;
;CODE TO SUPPORT CTY1 (CPU1-CTY) AS A TERMINAL
FTAIR(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;APPEND IMPLIES READ[
;IF -1 A FILE WHICH CAN BE APPENDED CAN BE READ
;IF 0 ONLY A PRIVILEGED JOB CAN READ AN APPEND-ONLY FILE]
FTLIB(KAFULL,KIFULL,KLFULL) ;
;CODE TO ALLOW LIB/SYS/XSYS REQUIRES FTSFD=-1[
;IF -1 USER CAN SET UP SO THAT LOOKUP WILL SEARCH HIS DISK, AN
;ARBITRARY PPN IF THE LOOKUP FAILS, THEN EXPERIMENTAL SYS AND SYS
;IF LOOKUP STILL FAILS]
FTDPRI(KAFULL,KIFULL,KLFULL) ;
;ENABLES DISK-PRIORITY CODE
FTKA10(TINY,KALUG,KAFULL) ;
;ENABLES KA10 SUPPORT
FTKI10(KILUG,KIFULL) ;
;INCLUDE KI10 SUPPORT
FTKL10(KLFULL) ;
;INCLUDE KL10 SUPPORT
FTTPAG(KAFULL,KIFULL,KLFULL) ;
;TTY PAGE COMMAND
FTTBLK(KAFULL,KIFULL,KLFULL) ;
;TTY BLANK COMMAND
FTNUL(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;NULL DEVICE
FTCBDB( ) ;
;CODE FOR DEBUGGING CB RESOURCE
FTPDBS( ) ;
;ALLOWS PDB TO SWAP WITH THE JOB
; IF THIS SWITCH IS ON THE PDB WILL GO ON THE DISK. IF THE SWITCH
; IS OFF THE PDB WILL STAY IN CORE AT ALL TIMES. THIS IS INCLUDED
; FOR INFORMATION ONLY. THE ONLY SUPPORTED SETTING IS OFF (I.E. 0)
FT22BIT(KIFULL,KLFULL) ;
;22-BIT CHANNEL(DF10C)
FTHSLN(KAFULL,KIFULL,KLFULL) ;
;HIGH-SPEED LOGICAL NAME SEARCH TECHNIQUE
FTIPCF(KAFULL,KIFULL,KLFULL) ;
;INTER-PROCESS COMMUNICATION FACILITY
FTVM(KIFULL,KLFULL) ;
;VIRTUAL MEMORY
FTD10H() ;
;2741 LINES ON A DC-10 REASSEMBLE DLSINT
FTXTC(KAFULL,KIFULL,KLFULL ) ;
;XTCSER SUPPORT FOR THE DA28C INTERFACE
FT2SEGMON(KIFULL,KLFULL) ;
;TWO SEGMENT MONITOR
FTNSCHED(KAFULL,KIFULL,KLFULL) ;
;CPU RESOURCE ALLOCATION CODE FOR NEW SCHEDULER
FTRP04(KAFULL,KIFULL,KLFULL) ;
;CODE FOR RP04-LIKE DISKS, WITH ECC CORRECTION
; SEEK WHILE XFER ACTIVE, HEAD OFFSET
FTGALAXY(KIFULL,KLFULL) ;
;CODE FOR GALAXY-10 BATCH SYSTEM
FTSLCK( ) ;
;CODE FOR SEARCH-LIST CHECKING IN FILSER.NORMALLY OFF
FT2ATB( ) ;
;CODE FOR 2 ACCESS TABLE BLOCKS. NORMALLY OFF
FTMEMNXM(KAFULL,KIFULL,KLFULL) ;
;CODE FOR RECOVERY FROM MEMORY DROPPING OFF-LINE (DEPENDS ON FTMEMPAR=-1)
FTMONL(KIFULL,KLFULL) ;
;CODE TO ALLOW MEMORY TO BE SET ON-LINE DURING TIME-SHARING (DEPENDS ON FTMEMNXM=-1)
FTMOFFL(KIFULL,KLFULL) ;
;CODE TO ALLOW MEMORY TO BE SET OFF-LINE DURING TIME-SHARING (DEPENDS ON FTMEMNXM=-1)
FTEQDQ(KAFULL,KIFULL,KLFULL) ;
;ENQ/DEQ FACILITY
FTDAS78(KAFULL,KIFULL,KLFULL) ;
;INCLUDE DAS78 SUPPORT (IBM 360&370, 2780)
FTDSIM(KAFULL,KIFULL,KLFULL) ;
;INCLUDE CODE FOR SIMULTANEOUS UPDATE
FTDHIA(KAFULL,KIFULL,KLFULL) ;
;INCLUDE DISK HIGH AVAILABILITY CODE
FTEXE(KAFULL,KIFULL,KLFULL) ;
;INCLUDE SUPPORT FOR EXE FILES
FTTLAB(KAFULL,KIFULL,KLFULL) ;
;INCLUDE TAPE LABELING FACILITY
FTTAPOP(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;INCLUDE TAPOP UUO FOR MAG-TAPE HANDLING
FTRDBACK(KIFULL,KLFULL) ;
;INCLUDE READ BACKWARDS FOR TU70/71
FTEMRT(KLFULL) ;
;INCLUDE KL10 EBOX/MBOX USER RUNTIME CAPABILITY
FTDX10(KIFULL,KLFULL) ;
;DX10 DEVICE-CHAINING (MAGTAPES)
FTMIC(KAFULL,KIFULL,KLFULL) ;
;INCLUDE MACRO COMMAND PROCESSOR
FTMLOG(KAFULL,KIFULL,KLFULL) ;
;INCLUDE MIC LOG FILE SUPPORT
FTFDAEM(KAFULL,KIFULL,KLFULL) ;
;INCLUDE SUPPORT FOR A FILE DAEMON
FTPSTR(KAFULL,KIFULL,KLFULL) ;
;INCLUDE SUPPORT FOR PRIVATE FILE STRUCTURES
FTPSCD(KAFULL,KIFULL,KLFULL) ;
;INCLUDE SCHEDULER PERFORMANCE GATHERING
FTDUAL(KAFULL,KIFULL,KLFULL) ;
;INCLUDE SUPPORT FOR DUAL-PORTED DISKS (RP04'S,RP06'S)
FTMDA(KIFULL,KLFULL) ;
;INCLUDE SUPPORT FOR MOUNTABLE DEVICE ALLOCATOR
FTACCT(KALUG,KILUG,KAFULL,KIFULL,KLFULL) ;
;INCLUDE SUPPORT FOR ACCOUNTING
FTPJOB(KAFULL,KIFULL,KLFULL) ;
;INCLUDE CODE FOR THE EXTENDED PJOB COMMAND