Google
 

Trailing-Edge - PDP-10 Archives - tops20_v6_1_tcpip_distribution_tp_ft6 - 6-1-documentation/exec.doc
There are 9 other files named exec.doc in the archive. Click here to see a list.






                            EXEC DOC FILE


                            January, 1985


                            Version 6.1(6)











COPYRIGHT (C) 1976,1978,1979,1980,1982,1983,1984 BY DIGITAL  EQUIPMENT
CORPORATION,  MAYNARD,  MASS.  THE SOFTWARE DESCRIBED IN THIS DOCUMENT
IS FURNISHED UNDER A LICENSE AND  MAY  BE  USED  AND  COPIED  ONLY  IN
ACCORDANCE  WITH  THE  TERMS OF SUCH LICENSE AND WITH THE INCLUSION OF
THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY OTHER COPIES THEREOF
MAY  NOT  BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON.
NO TITLE TO AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.

THE INFORMATION IN THIS DOCUMENT IS SUBJECT TO CHANGE  WITHOUT  NOTICE
AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.

DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
                                                                Page 2
                                                             04 Jan 85


This document provides a brief summary of the new and changed commands
in the EXEC packaged with the 6-series TOPS-20 monitors.  The document
has two chapters, the first chapter listing the  enhancements  in  the
V6.0  EXEC  over  the  V5.1  EXEC,  the  second  chapter  listing  the
enhancements in the V6.1 EXEC over the 6.0 EXEC.   Appendices  present
the concepts involved in multiforking, the new privileged commands and
ephemeral forks.











                              CHAPTER I

                TOPS-20 RELEASE 6.0 EXEC ENHANCEMENTS



New Commands (Not including multiforking-class commands)
--------------------------------------------------------

PERUSE
SEND


New Arguments, Subcommands, and Switches
----------------------------------------

Command         Argument, Subcommand, or Switch
-------         -------------------------------

BUILD           PRESERVE,
                TOPS10-PROJECT-PROGRAMMER-NUMBER

LOAD-class      /10-BLISS, /36BLISS, /ABORT, /FAIL, /[NO]FLAG-NON-STANDARD,
                /[NO]MACHINE-CODE, /PASCAL, /SAIL, /SNOBOL, /[NO]WARNINGS

DDT             /OVERLAY

DIRECTORY       COMPLETE

INFO DECNET     node-name

INFO MAIL       SYSTEM

LOGIN           /FAST

MERGE           /OVERLAY

RECEIVE/REFUSE  USER-MESSAGES

SET MAIL        Notification-count

SET [NO] TRAP JSYS
                /DEFINED, /UNDEFINED

TERMINAL        [NO]INHIBIT
TOPS-20 RELEASE 6.0 EXEC ENHANCEMENTS                         Page I-2
                                                             04 Jan 85



New Multiforking-class Commands
-------------------------------

ERUN
FREEZE
KEEP
UNKEEP


Multiforking Arguments and Switches Added to Existing Commands
--------------------------------------------------------------

Command         Argument or Switch
-------         ------------------

CONTINUE        fork-name, fork-number, /BACKGROUND, /NORMALLY, /STAY

FORK            fork-name

INFORMATION     FORK-STATUS

INFORMATION
 DEFAULT        PROGRAM

RESET           (*), (.), fork name, fork number

                        { [NO-]EPHEMERAL
SET DEFAULT     PROGRAM { KEEP
                        { NONE

SET FILE        [NO] EPHEMERAL

SET             NAME

                        { [NO-]EPHEMERAL
SET             PROGRAM { KEEP
                        { NONE

START           /BACKGROUND, /NORMALLY, /STAY


Miscellaneous EXEC Enhancements
-------------------------------

Command         Enhancement
-------         ----------

BUILD           Square brackets legal in directory names
                Forty directory group numbers allowed in a directory

INFO LOGICAL-NAMES
                Accepts wildcards in logical name
TOPS-20 RELEASE 6.0 EXEC ENHANCEMENTS                         Page I-3
                                                             04 Jan 85


LOGIN           Displays date and time of last LOGIN

SET DIRECTORY PASSWORD
                Old Password Not Requested

PUSH            Runs the EXEC defined by the system logical name
                DEFAULT-EXEC:


New Fields Displayed by INFORMATION Commands
--------------------------------------------

INFORMATION
Argument        New Field
--------        ---------

PROGRAM         SET PROGRAM and SET DEFAULT PROGRAM settings

SYSTEM-STATUS   Sending of level zero and level one messages to all users
                and BUGCHK messages to console terminal.

TERMINAL        TERMINAL INHIBIT and SYSTEM-MESSAGES status

VERSION         Decimal version numbers

DIRECTORY       Password not displayed
                TOPS-10 project-programmer number

SYSTEM          DECnet terminals allowed/disallowed

ARPANET         New fields in display


^E Privileged Command Enhancements
----------------------------------

Command         New Subcommand, Argument or Feature
-------         -----------------------------------

^ECEASE         NOW
                Displays shutdown time and ARPANET or DECnet node name before
                requiring an extra confirm.

^ECREATE        PRESERVE
                TOPS10-PROJECT-PROGRAMMER-NUMBER nn,nn

                Square brackets legal in directory names
                Forty directory group numbers allowed in a directory

^EPRINT         Password not displayed

^ESET           [NO] FAST-LOGINS-ALLOWED
                [NO] LEVEL-ONE-MESSAGES
                [NO] LEVEL-ZERO-MESSAGES
TOPS-20 RELEASE 6.0 EXEC ENHANCEMENTS                         Page I-4
                                                             04 Jan 85


                [NO] WORKING-SET-PRELOADING











                              CHAPTER II

                TOPS-20 RELEASE 6.1 EXEC ENHANCEMENTS





        ASSIGN, BACKSPACE, DEASSIGN, DEFINE, DISMOUNT,EOF, MOUNT, 
        REWIND, SKIP, INFORMATION STRUCTURE,INFORMATION VOLUMES, 
        and INFORMATION LOGICAL-NAMES 

                 - Colon after device name is now optional.


        BUILD and ^ECREATE

                - PERMANENT/WORKING INFINITY 
                - PRESERVE
                - TOPS10-PROJECT-PROGRAMMER-NUMBER nn,nn
                - No password typeout 


        ^ECEASE

                - Requires confirmation, types node name, downtime
                - NOW subcommand to shut immediatley after the confirm


        COPY 
                - SUPERSEDE with ALWAYS, OLDER, and NEVER 


        DDT, MERGE

                - /OVERLAY subcommand to force overlaying of existing pages


        DEFINE

                - Recognition now works 


        DIRECTORY       

               - COMPLETE subcommand, display ful filespec of each file
TOPS-20 RELEASE 6.1 EXEC ENHANCEMENTS                        Page II-2
                                                             04 Jan 85




        INFORMATION CLUSTER

                - Much like INFO DECNET, returns names of all CFS nodes


        INFORMATION DECNET

                - Allows node name to be specified


        INFORMATION LOGICAL-NAMES  

                - Accepts wildcards in logical name


        INFORMATION JOB

                - Now outputs Arpanet/DECnet host names


        INFORMATION SUPERIORS

                - Returns number of superior processes of this exec level


        INFORMATION VERSION

                - Decimal version numbers if VI%DEC bit is on in version word


        LOAD-class-commands

                - New switches:

                /10-BLISS       /36-BLISS
                /FAIL           /PASCAL
                /SAIL           /SNOBOL
                /ABORT          /[NO] FLAG-NON-STANDARD
                /[NO] WARNINGS


        LOGIN
          
                - /FAST for logging in without taking command files,etc
                     ^ESET [NO] FAST-LOGINS-ALLOWED
                     Setspd's ENABLE/DISABLE FAST-LOGIN-OPTION
                - Displays date and time of last LOGIN
                - New system-wide LOGIN.CMD
                - New system-wide BATCH.CMD


        LOGOUT  
TOPS-20 RELEASE 6.1 EXEC ENHANCEMENTS                        Page II-3
                                                             04 Jan 85



                - LOGOUT n requires confirmations, types out job info
                - New system-wide LOGOUT.CMD


        PERUSE          

                - Runs EDITOR: with read-only option


        PUSH

                - Runs the EXEC pointed to by DEFAULT-EXEC:


        RECEIVE/REFUSE

                - USER-MESSAGES for unprived TTMSG jsys


        SEND and ^ESEND

                - SEND available for unprived users
                - New user name argument


        SET HOST

                - Runs CTERM-SERVER or program pointed to by NRT:


        SET STATUS-WATCH

                - Allows settable control character which will type 
                  out file status information


        SYSTAT

                - Displays originating hostname of TCP/IP, LAT,
                 DECnet connections


        ^ESET

                - [NO] LEVEL-ONE-MESSAGES
                - [NO] LEVEL-ZERO-MESSAGES
                - [NO] WORKING-SET-PRELOADING


        SET DIRECTORY PASSWORD

                - Old password not requested in certain cases
TOPS-20 RELEASE 6.1 EXEC ENHANCEMENTS                        Page II-4
                                                             04 Jan 85



        SET [NO] TRAP JSYS

                - /DEFINED, /UNDEFINED


        TERMINAL        

                - [NO] INHIBIT for graphics terminal
                - [NO] RECEIVE advice, user messages, etc
                - VT200-SERIES 

        TYPE

                - UNFORMATTED subcommand to type files without CCOC translation


        MULTIFORKING FEATURES


        /STAY           Used for output only programs


        /BACKGROUND     Used for any program which requires input


        /NORMALLY       Keeps for in the forground


        INFORMATION FORK-STATUS


        COMPILE         /STAY


        CONTINUE        fork-name, fork-number
                        /BACKGROUND, /NORMALLY, /STAY

                                
        START           /BACKGROUND, /NORMALLY, /STAY


        FORK            fork-name, fork-number



        KEEP


        UNKEEP


        FREEZE
TOPS-20 RELEASE 6.1 EXEC ENHANCEMENTS                        Page II-5
                                                             04 Jan 85



        RESET           (*), (.), fork name, fork number 


        SET NAME


        ERUN


        SET FILE [NO] EPHEMERAL


        SET DEFAULT PROGRAM    [NO-]EPHEMERAL
                               KEEP
                               NONE


        INFORMATION DEFAULT PROGRAM


        SET PROGRAM    [NO-]EPHEMERAL
                       KEEP (AND)  continue, start, re-enter
                       NONE


SETSPD:
        Dumps copied to DMP:
        Daylight savings time can be turned off
        Hangup on LOGOUT selectable











                              APPENDIX A

                             MULTIFORKING



Multiforking is an EXEC feature that organizes  a  job's  memory  into
separate,  parallel  areas  called  "forks".   Each  fork contains one
program and its inferior forks, if any.  This organization  of  memory
means  users can run several programs simultaneously while leaving the
terminal free for other work.   Once  loaded,  forks  can  be  invoked
without reinitializing.  This means that a user can go from a compiler
to an editor and back again without reloading either program.

Multiforking can replace some applications that require multiple EXECs
via  PUSH and POP.  Assisted by a new group of multiforking-class EXEC
commands, users can control all their forks from a single EXEC.

Note that is this discussion, "fork name" refers to  a  fork  name  or
fork number.

Before reading about the  multiforking-class  commands,  review  these
terms:

      *  FORK

         A fork is commonly referred to as  a  "process"  in  TOPS-20.
         The  word  fork  is  preferred  when  discussing multiforking
         because   multiforking   should   not   be   confused    with
         multiprocessing, which refers to multiple CPUs.  A fork is an
         address space in virtual memory that contains a program.   In
         a  single-forking EXEC, a job normally has one fork per EXEC.
         In a multiforking EXEC, a job  can  have  several  forks  per
         EXEC.

      *  KEPT FORK

         A kept fork has these characteristics:

          o  A kept fork is not reset when another program is  brought
             into  memory.   Normally,  when  a  program  is  run,  it
             replaces  or  "resets"  the  fork  currently  in  memory.
             However,  if  the  program in memory is a kept fork and a
             new program is run, the new program is placed  in  a  new
             fork.
MULTIFORKING                                                  Page A-2
                                                             04 Jan 85


          o  A kept fork is not cleared from  memory  with  the  RESET
             command  unless  the  fork  is  explicitly  named, or the
             asterisk (*) or period (.) argument used.

          o  A kept fork can be invoked by typing the kept  fork  name
             as  an  EXEC  command.   In addition, kept fork names are
             provided full COMND JSYS support.  A kept fork  name  can
             be  abbreviated to the point where it is unique from EXEC
             commands and other kept fork names.   ESCAPE  recognition
             and  question  mark  help  also  function  with kept fork
             names.


      *  CURRENT FORK

         The current fork is to commands that deal  with  programs  as
         the  connected directory is to commands that deal with files.
         The current fork is the default fork  for  multiforking-class
         commands  that  accept  an  optional fork name argument.  The
         current fork is also the object of EXEC commands that do  not
         accept  a  fork  name;   for example, EXAMINE and INFORMATION
         MEMORY-USAGE.

         In the INFORMATION FORK-STATUS display (discussed later),  an
         arrow (=>) points to the current fork.

      *  FOREGROUND FORK

         A foreground fork is the fork  that  is  in  control  of  the
         terminal.   When  a  program  is  in  a  foreground fork, all
         terminal input and  output  (with  the  exception  of  system
         messages  and  output  from  background  forks) refers to the
         foreground fork.

      *  BACKGROUND FORK

         A background fork is a fork that is running without being  in
         control  of  the  terminal.   When a program is placed in the
         background, the terminal "stays" at EXEC command level.   The
         user is then free to use the terminal to run EXEC commands or
         other programs.

         A background fork does not have to be kept;  as long  as  the
         fork  is  running,  it  is  protected  from  being reset when
         another program is run.


NEW MULTIFORKING-CLASS COMMANDS

Multiforking-class commands allow you to refer to a fork by  the  fork
name or the fork number.
MULTIFORKING                                                  Page A-3
                                                             04 Jan 85


     @KEEP (FORK) [fork-name]

     The KEEP command assigns a fork a "kept"  status  which  protects
     the  fork  from  being  reset  when another program is run.  This
     command causes the fork to restart at its starting point when the
     kept fork name is given as an EXEC command.

     @UNKEEP (FORK) [fork-name]

     The UNKEEP command clears the "kept" status of a fork.  Note that
     this command is simply a logical opposite to the KEEP command and
     its use is limited.  If a kept fork is no longer  needed,  it  is
     better  to return the fork to the system immediately by using the
     RESET command, than to wait for the unkept fork to be reset  when
     another program is brought into memory.

     @FREEZE (FORK) [forkname]

     The FREEZE command stops a running background fork.   FREEZing  a
     background  fork  from  EXEC command level has the same effect as
     typing CTRL/C while to the foreground fork (the fork  in  control
     of the terminal).

NEW MULTIFORKING COMMAND FIELDS

Several new arguments and switches have been added to EXEC commands to
address  multiple  forks.   Also,  the  information  provided  by some
existing INFORMATION command arguments has been expanded.  The new and
changed arguments are described below.

SET Command
     @SET PROGRAM (NAME) FORK-NAME (ATTRIBUTE) KEEP (AND) ARGUMENT

     This  command  tells  the  system  keep  the  fork  whenever  the
     specified program is loaded.  If the fork is already in memory it
     is kept immediately.

     KEEP must be followed by one of these arguments:
      *  CONTINUE
      *  REENTER
      *  START


     These arguments set the point that the program  will  restart  at
     when  the  fork  is invoked by typing the fork name as a command.
     CONTINUE restarts the fork at the  point  where  it  was  halted.
     REENTER restarts the fork at its reentry point (for most programs
     the reentry point is the same as the starting  point).   Finally,
     START restarts the program at the starting point.

     When the fork is kept,  the  EXEC  prints  the  message  [Keeping
     FORK-NAME].   When  the kept fork name is typed as a command, the
     EXEC responds with  the  message,  [Continuing],  [Starting],  or
     [Reentering].
MULTIFORKING                                                  Page A-4
                                                             04 Jan 85


     @SET PROGRAM (NAME) FORK-NAME (ATTRIBUTE) NONE

     This command cancels the SET PROGRAM setting  for  the  specified
     program.   If  the  program  is  already in a kept fork, the fork
     remains kept but the starting address is set to START.

     @SET [NO] DEFAULT (FOR) PROGRAM (ATTRIBUTE) KEEP (AND) ARGUMENT

     This command causes any program  that  is  not  given  in  a  SET
     PROGRAM  command  to be placed in a kept fork when the program is
     placed in memory with the CSAVE, GET, R, RUN and  SAVE  commands.
     Like  the  SET  PROGRAM KEEP command, SET DEFAULT PROGRAM must be
     followed by a CONTINUE, START, or REENTER argument.

     The SET PROGRAM and SET DEFAULT PROGRAM commands  are  in  effect
     for  the  current  EXEC  level  and  should  be  entered  in  the
     COMAND.CMD file.

     The SET NO DEFAULT command clears the default setting.

     @SET DEFAULT (FOR) PROGRAM (ATTRIBUTE) NONE

     This command is equivalent to the SET NO DEFAULT PROGRAM command;
     it  clears  the  setting established with the SET DEFAULT PROGRAM
     command.

     @SET NAME (OF CURRENT FORK) FORK-NAME

     This command  changes  the  name  of  the  current  fork  to  the
     specified  alphanumeric name.  This is useful when a fork name is
     similar to or the same as an EXEC command.  Note  that  the  fork
     must be kept in order to give the fork name as a command.
INFORMATION Command
     @INFORMATION (ABOUT) PROGRAM-STATUS

     The information displayed by this command has been expanded.  The
     command  now  displays  the  SET  PROGRAM and SET DEFAULT PROGRAM
     command settings.  Also displayed is  the  status  of  all  forks
     belonging to the current EXEC.

     @INFORMATION (ABOUT) FORK-STATUS

     The new FORK-STATUS argument displays the fork status portion  of
     the INFORMATION PROGRAM-STATUS display.

     @INFORMATION (ABOUT) DEFAULTS (FOR) PROGRAM

     This command  displays  the  setting  established  with  the  SET
     DEFAULT  PROGRAM  command.  This information is also available in
     the INFORMATION PROGRAM-STATUS command.
MULTIFORKING                                                  Page A-5
                                                             04 Jan 85


     FORK (IS) [fork-name]

     The  FORK  command  now  has  a  fork  name  argument   that   is
     interchangeable with the existing fork number argument.  The FORK
     command selects the current fork.

     RESET (FORK) [argument]

     Four arguments have been  added  to  the  RESET  command.   These
     arguments select the fork(s) to be reset:
          fork-name fork-number . (the current fork) * (all forks)

     The RESET command with no arguments now clears only unkept forks.

     @CONTINUE (FORK) [fork-name] [/switch]

     The CONTINUE command now has a fork name or number argument which
     can be used to select the fork to be continued.

     Three new switches have also been added to the CONTINUE command:
          /BACKGROUND /NORMALLY /STAY

     Two  of  these  switches,  /NORMALLY  and  /STAY,  were  formerly
     keywords.   They  were  changed  to  switches  to avoid ambiguity
     between the keyword and the new fork  name  argument.   Also  the
     /STAY  switch  is  consistent with the load-class commands' /STAY
     switch.

     /BACKGROUND and /STAY

     Both of these switches cause  the  terminal  to  "stay"  at  EXEC
     command  level while the program continues to run in a background
     fork.  The switches differ in the way they control the background
     fork's terminal I/O.

     For  terminal  output,  both  /BACKGROUND  and  /STAY  allow  the
     background  fork  to  send  output  such as error messages to the
     terminal.  However with some programs, MACRO for example,  output
     is blocked by /BACKGROUND.

     When the background program  requests  terminal  input,  such  as
     another  file to process, /BACKGROUND causes the fork to halt and
     display the message [FORK-NAME wants the TTY].  This  message  is
     printed  regardless  of  what  the user is doing at the terminal.
     The program can then  be  continued  and  given  input  with  the
     CONTINUE command or by typing the kept-fork name.

     The /STAY switch allows  the  fork  to  request  input  from  the
     terminal.   If  another fork is in control of the terminal or the
     terminal is at  EXEC  command  level,  the  background  fork  can
     intercept  input  intended  for  the  EXEC  or  another  program.
     Therefore, it is recommend that /STAY be used only  for  programs
     that do not request input from the terminal.
MULTIFORKING                                                  Page A-6
                                                             04 Jan 85


     /NORMALLY

     This is the default setting.  It continues the fork and places it
     in the foreground (in control of the terminal).

     @START (PROGRAM) [address] [/switch]

     Two of the switches that have been added to the CONTINUE  command
     have  also  been  added  to the START command.  The START command
     always refers to the current fork;  it does  not  accept  a  fork
     name or number argument.

     Note that CONTINUE  and  START  with  the  /STAY  or  /BACKGROUND
     switches   always   make   the  specified  fork  current.   Other
     multiforking-class commands, such as KEEP and FREEZE, accept  the
     name of a noncurrent fork without making the fork current.











                              APPENDIX B

                        ^E PRIVILEGED COMMANDS



$^ECEASE

Two changes have been made to the ^ECEASE command, which are  intended
to prevent the accidental shutdown of the wrong system in a networking
or CFS environment.  First, the  command  displays  the  name  of  the
system  to  be  shutdown  (for DECnet or ARPANET systems only) and the
time and date of the scheduled shutdown.  Second, an additional RETURN
is required to confirm the shutdown.

Also, a new argument, NOW, has been added.  ^ECEASE NOW shuts down the
system immediately.

$^ECREATE AND @BUILD COMMANDS

Two subcommands have been added to the ^ECREATE and BUILD commands and
several other subcommands have been changed.

NEW ^ECREATE AND BUILD SUBCOMMANDS

$$TOPS10-PROJECT-PROGRAMMER-NUMBER (FOR COMPATIBILITY) n,n

This subcommand assigns a TOPS-10  project-programmer  number  to  the
directory.   This  allows  TOPS-10  programs  that require a PPN to be
compatible with TOPS-20.

$$PRESERVE (SUPERIOR QUOTAS)

This subcommand preserves  the  values  of  the  superior  directory's
PERMANENT,  WORKING  and MAXIMUM-SUBDIRECTORIES parameters.  Normally,
when creating a subdirectory,  the  values  of  these  parameters  are
subtracted   from   the   superior  directory.   PRESERVE  stops  this
subtraction.

When used in the BUILD command, PRESERVE requires  WHEEL  or  OPERATOR
privileges.

ENHANCED ^ECREATE AND BUILD SUBCOMMANDS
^E PRIVILEGED COMMANDS                                        Page B-2
                                                             04 Jan 85


$$USER-OF-GROUP

To help clarify  its  meaning,  the  USER-GROUP  subcommand  has  been
renamed to USER-OF-GROUP.

Also, the  number  of  user  groups  allowed  in  a  directory  and  a
subdirectory  has been raised from 19 to 40.  User groups are assigned
with the USER-OF-GROUP and SUBDIRECTORY-USER-GROUP subcommands.

$$LIST

This subcommand now displays the TOPS-10 PPN assigned to the directory
with  the  TOPS10-PROJECT-PROGRAMMER-NUMBER subcommand.  Also, LIST no
longer displays the directory's password.

$$PUSH

The PUSH subcommand now creates an inferior level of the EXEC  defined
by   the   new   system  logical  name,  DEFAULT-EXEC:.   By  defining
DEFAULT-EXEC:  within the job, a user can PUSH  to  the  EXEC  of  his
choice.

$^ESEND

The EXEC now inserts CRLFs into multiple-line messages, so that  words
that  are  broken across two lines on the sender's terminal, appear on
the same line on the receiving terminal(s).

$^EPRINT

This command now displays the TOPS-10 PPN assigned to  the  directory.
Also, ^EPRINT no longer displays the directory's password.

$^ESET COMMAND

Three new arguments have been added to  the  ^ESET  command,  and  the
functions  provided  by several existing arguments have been expanded.
The new and changed arguments are listed and described below.

NEW ^ESET ARGUMENTS

The new ^ESET arguments provide control of  system  parameters  during
timesharing  from  the EXEC.  Normally these parameters are defined at
system start-up.

$^ESET [NO] LEVEL-ZERO-MESSAGES $^ESET [NO] LEVEL-ONE-MESSAGES

These arguments specify that level zero and  level  one  messages  are
sent  to  all  terminals  on  the  system.   Level  zero  messages are
primarily of interest to operations personnel while level one messages
are  of interest to all users.  Both level zero and level one messages
are always displayed on the console terminal.
^E PRIVILEGED COMMANDS                                        Page B-3
                                                             04 Jan 85


The INFORMATION SYSTEM-STATUS command indicates whether or  not  level
zero and one messages are enabled.

$^ESET [NO] WORKING-SET-PRELOADING

This command specifies that the entire working set  of  a  process  is
brought  into  memory  at  once  when  the process is selected to run.
Otherwise, this action occurs on a page-by-page basis.

Working set preloading should be enabled only if the system runs large
compute-bound jobs.  If the system runs many interactive jobs, disable
working    set    preloading    with    the    command,    ^ESET    NO
WORKING-SET-PRELOADING.

The INFORMATION SYSTEM-STATUS command indicates whether or not working
set preloading is enabled.

ENHANCED ^ESET ARGUMENTS

$^ESET DATE-AND-TIME date-and-time

The scope of this command has been  expanded.   When  given  from  any
system  in  a  CFS cluster, the command sets the date and time for all
systems in the cluster.

$^ESET [NO] FAST-LOGINS-ALLOWED

This command gives users the option of using the LOGIN command's /FAST
switch.   The  /FAST  switch prevents the processing the LOGIN.CMD and
COMAND.CMD files, the printing of system mail and notice of new  mail.
When  login  command  files  are  used  to place users in a structured
environment, the ability to use /FAST can be  removed  from  the  EXEC
with the ^ESET NO FAST-LOGINS-ALLOWED command.

To implement this command, a new SMON and TMON JSYS function,  .SFXEC,
has   been   created  to  allow  the  system  to  store  site-specific
configuration flags for the EXEC.   In  future  releases,  the  .SFXEC
function  may  be  used by SETSPD and new ^ESET commands to enable and
disable EXEC features.

$^ESET TERMINAL n m input-speed output-speed

This command can now set the line speeds for  a  range  of  terminals.
The  lowest  terminal  line  number  (n) is given first, followed by a
space and the highest terminal number (m) in the range.

DELETED ^ESET arguments

$^ESET ARPANET

The ARPANET argument has been removed from the  ^ESET  command.   This
function is available with the IPHOST program.











                              APPENDIX C

                       EPHEMERAL FORK COMMANDS



The ability to make forks "ephemeral" or transitory has been added  to
the  EXEC.  A program that runs in an ephemeral fork acts like an EXEC
command (excluding those EXEC commands that run programs or  otherwise
affect  memory).   Ephemeral  forks  and  EXEC  commands  share  these
characteristics:

      o  They do not affect programs in memory.  For example,  if  you
         exit  a  program and issue a SYSTAT command, or run a program
         in an ephemeral fork, neither the command nor  the  ephemeral
         fork will disturb the program in memory.

         A program that runs ephemerally is always  placed  in  a  new
         fork.

      o  They disappear when interrupted or when processing completes.
         For  example, if you stop execution of a SYSTAT command or an
         ephemeral fork with  CTRL/C,  neither  the  command  nor  the
         ephemeral fork can be continued.

         Whenever you stop or exit an  ephemeral  fork,  the  fork  is
         automatically reset (cleared from memory).


Good candidates for ephemeral forks are programs that, in  the  user's
environment,  should  be  part  of  the EXEC.  These programs may have
short execution times and  simply  display  information  in  a  manner
similar to the INFORMATION and SYSTAT commands.

Several new commands have been added  to  the  EXEC  to  run  programs
ephemerally.  In addition, several commands have been modified to deal
with ephemeral forks.

@SET FILE [NO] EPHEMERAL FILE-SPEC

This command assigns an attribute to the file itself so that  whenever
the program is run, it is automatically placed in an ephemeral fork.
EPHEMERAL FORK COMMANDS                                       Page C-2
                                                             04 Jan 85


An ephemeral file is run ephemerally only when  the  program  name  is
given  as  an  EXEC command.  For example, if the file SYS:HOST.EXE is
set ephemeral, it can only  be  run  ephemerally  by  typing  HOST  or
SYS:HOST.   Running  HOST  by typing R HOST or RUN SYS:HOST causes the
ephemeral attribute to be ignored.

If the file is in a user directory,  it  can  be  run  ephemerally  by
typing the directory and file names.  (When only a file name is given,
the  system  always  searches  through  SYS:).   For   example,   type
SMITHSCORE  to  run  the  SCORE  program  ephemerally.   If  the SMITH
directory is part of the job-wide definition of SYS:, SCORE can be run
by typing only the program name.

The command  SET  FILE  NO  EPHEMERAL  removes  the  file's  ephemeral
attribute.

@SET PROGRAM (NAME) PROGRAM-NAME [NO-]EPHEMERAL

This command tells the system to place the specified program  into  an
ephemeral  fork  when the program is run by typing the program name as
an EXEC command.  (Recall that the  ephemeral  attribute  is  disabled
when the program is run with the R or RUN commands.)

The NO-EPHEMERAL argument command disables the ephemeral attribute for
a user's copy of an ephemeral system program.

@SET [NO] DEFAULT PROGRAM [NO-]EPHEMERAL

The SET DEFAULT PROGRAM EPHEMERAL command sets a global  default  that
causes  any program that is not already given in a SET PROGRAM command
to run ephemerally.  The NO-EPHEMERAL argument disables the  ephemeral
attribute  for the job's copy of any ephemeral SYS:  program.  The SET
NO DEFAULT command clears the default setting.

@SET DEFAULT PROGRAM NONE

This command is equivalent to the SET NO DEFAULT PROGRAM command.  The
command clears the SET DEFAULT PROGRAM setting.

The SET PROGRAM and SET DEFAULT PROGRAM commands are in effect for the
current  terminal  session.   It is recommended that these commands be
placed in the COMAND.CMD file.  The INFORMATION PROGRAM-STATUS command
now displays the SET PROGRAM and SET DEFAULT PROGRAM settings.

@INFORMATION DEFAULT PROGRAM

This command displays the default program attribute specified with the
SET DEFAULT PROGRAM command.

@ERUN (PROGRAM) FILE-SPEC
EPHEMERAL FORK COMMANDS                                       Page C-3
                                                             04 Jan 85


This command runs a program in an ephemeral fork.
     @ERUN SHONET

Is the same as:

     @SET PROGRAM SHONET EPHEMERAL
     @SHONET

If no directory is given in the filespec, the default is SYS:.


                               Summary

In summary,  the  ephemeral  commands  make  programs  act  like  EXEC
commands.  There are three ways to run a program in an ephemeral fork:

      o  By attaching an ephemeral attribute to the file  itself  with
         SET FILE EPHEMERAL.

      o  By telling the system with SET PROGRAM EPHEMERAL.

      o  By running the program with the ERUN command.