Google
 

Trailing-Edge - PDP-10 Archives - tops20-v7-ft-dist1-clock - 7-sources/fffwin.b36
There are 3 other files named fffwin.b36 in the archive. Click here to see a list.
%TITLE 'FFFWIN'
%SBTTL 'COMPILE With VARIANT=3 for DIU-10'
MODULE FFFWIN =
BEGIN
!
!	COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1985, 1986.
!	ALL RIGHTS RESERVED.
!
!	THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED  AND
!	COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
!	THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS  SOFTWARE  OR
!	ANY  OTHER  COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
!	AVAILABLE TO ANY OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE
!	SOFTWARE IS HEREBY TRANSFERRED.
!
!	THE INFORMATION IN THIS SOFTWARE IS  SUBJECT  TO  CHANGE  WITHOUT
!	NOTICE  AND  SHOULD  NOT  BE CONSTRUED AS A COMMITMENT BY DIGITAL
!	EQUIPMENT CORPORATION.
!
!	DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF
!	ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!
! 572 - Add TOPS-10 conditionals
!
REQUIRE 'fffreq';

REQUIRE 'rmsosd';

COMPILETIME                                                              !a572
    Load_with_RMS = ((%Variant AND 1) NEQ 0),
    Section_Zero = ((%Variant AND 2) NEQ 0);

FORWARD ROUTINE
    checkeof,					!   End-of-file check
    RAddr,					!   Globalize RMS-local address
    ebc_new_block,				! Skip remainder of block
    six_rd_hdr,					! Read SIXBIT record header
    ebc_rd_hdr,					! Read EBCDIC block/rec header
    rd_rec,					! Move a record
    rd_wrd,					! RD_REC for binary data
    rd_buf,					! Get next buffer
    g_byte;					! Put specified byte in window

%IF NOT Section_Zero                                                      !a572
%THEN
FORWARD ROUTINE
    gptr,					! Turn 2-word GBP to OWGBP
    ea_ch$move,					! CH$MOVE for OWGBPs
    getwindow,					!   File/process handler
    pagexist,					!   Does this page exist?
    MoveRec;					!   Move a record to/from user buffer
%FI

!
! Externals
!

EXTERNAL
    stksec,					! Stack's section
    BlkSec,					! User's section
    FFFSec,					! Our section
    RmsSec;					! RMS's section

LITERAL
    page_size = %O'1000';

%IF Section_Zero                                                          !a572
%THEN

!+
! Since one word global byte pointers do not work in section 0
! (at least not on a 2020), change each occurance of ea_ch$ptr and
! ea_ch$move to the normal BLISS defined ones
!-

UNDECLARE
    %Quote ea_ch$ptr;

MACRO
    ea_ch$ptr = ch$ptr %,
    ea_ch$move = ch$move %;

%FI
%SBTTL 'GETWINDOW - position page in window'

%IF NOT Load_with_RMS
%THEN

GLOBAL ROUTINE getwindow (fpage, abortf) =
    BEGIN

    LOCAL
	bpage,
	bfdadr,
	incore,
	bktsiz;

    !+
    !    If there is a page in the window, release it
    !-

    IF .cbd [bkt$a_address] NEQ 0
    THEN 					! There is a current bucket
	Put_Bucket (Rab = .Rab, Update = false, Desc = .cbd);

    !+
    !    Check if specified file page exists (if caller wants us to)
    !-

    IF .abortf NEQ false
    THEN
	BEGIN

	!+
	!    Read the page's accessibility
	!-

	IF NOT pagexist (.fst [fst$h_jfn], .fpage)
	THEN
	    BEGIN
	    SIGNAL (ff$_page_not_exist);
	    RETURN ss$_error;
	    END;				! Page non-existent

	END;

    !+
    !    We can now fetch the new bucket and make it "current"
    !-

    bktsiz = .cbd [bkt$v_size];			! Get the bucket size

    IF Get_Bucket (Rab = .Rab, Desc = cbd, Bucket = .fpage, Bucket_Size = .bktsiz) EQL false
    THEN
	BEGIN
	SIGNAL (ff$_bkt_get_failed);
	RETURN false
	END;

    RETURN true;
    END;					! End routine GETWINDOW
%FI
%SBTTL 'CHECKEOF - check if at end of file'

GLOBAL ROUTINE checkeof =
    BEGIN

    LOCAL
	hybyte,
	next_hybyte;

    !+
    !   SEQUENTIAL access:  Have we already read the maximum
    !                       number of bytes in this file?
    !
    !   RFA access:  Is the user's RFA less than 0 or greater
    !                than the maximum record number?
    !                (not yet implemented --- 8/16/84)
    !-

    hybyte = .Rst [Rst$g_highest_byte];
    next_hybyte = MIN (.fst [fst$g_sof],
	.rst [rst$g_highest_byte] + $size_in_bytes (rms$k_bin_size,
	    rms$k_page_size));

    IF (.next_hybyte - .hybyte) LEQ 0		! No more bytes in file
    THEN 					! We are at end of file
	RETURN true;

    RETURN false;				! End of file not encountered
    END;					! End routine CHECKEOF
%SBTTL 'PAGEXIST - check if file page exists'

%IF NOT Load_with_RMS
%THEN

GLOBAL ROUTINE pagexist (file_id, p_to_chk) : =
    BEGIN

    LOCAL
	page_access : BLOCK [1];

    IF NOT rpacs (xwd (.file_id, .p_to_chk); page_access) THEN SIGNAL (ff$_rpacs_failed);

    IF .POINTR (page_access, pa_pex) THEN RETURN true ELSE RETURN false;

    END;					! End PAGEXIST

%FI
GLOBAL ROUTINE RAddr (Rms_Local_Address) =
! Globalize possibly RMS-local address
    BEGIN

    IF (.Rms_Local_Address NEQ 0) AND ((.Rms_Local_Address AND FFF$M_Left_Half) EQL 0)
    THEN
	(.Rms_Local_Address OR .RmsSec)
    ELSE
	.Rms_Local_Address

    END;
%SBTTL 'MOVEREC - move a record around'

%IF NOT Load_with_RMS
%THEN

GLOBAL ROUTINE moverec (windowptr, useradr, putflag, bytes, bytesize) : =
    BEGIN

    LOCAL
	wordcount,				! COUNT OF WORDS TO MOVE
	bytesword,
	room,					! ROOM LEFT ON CURRENT PAGE
	extrabytes,
	SOURCE,
	dest,
	buf2ptr : VECTOR [2];			!TWO-WORD BP IF NEEDED

    REGISTER
	temp;

    IF (.bytes LSS 0) OR (.bytesize LEQ 0) OR (.bytesize GTR 36) THEN RETURN false;

    bytesword = 36/.bytesize;			! FIND # OF BYTES IN WORD
    wordcount = .bytes/.bytesword;		! # OF WORDS TO MOVE
    extrabytes = .bytes - (.wordcount*.bytesword);
!+
!    FOR A $PUT OPERATION, WE WILL MOVE THE RECORD BY USING
!    A BLT INSTEAD OF A ILDB-IDPB LOOP. WHEN WE ARE LATER
!    READING THE RECORD, WE MUST INSURE THAT WE DON'T MOVE
!    THE EXTRA GARBAGE BYTES IN THE RECORD
!-

    IF (.putflag)
    THEN

	IF (.extrabytes NEQ 0)
	THEN
	    BEGIN
	    wordcount = .wordcount + 1;		! BUMP THE WORDCOUNT
	    extrabytes = 0			! NO EXTRA BYTES
	    END;

    WHILE .wordcount NEQ 0 DO
	BEGIN

	!+
	!    COMPUTE HOW MUCH SPACE WE HAVE LEFT ON THIS PAGE
	!-

	room = (.curentbufferadr + rms$k_page_size) - .windowptr;

	!+
	!    WE MUST NOW CHECK TO SEE IF THE FILE PAGE IS COMPLETELY FULL
	!-

	IF .room EQL 0
	THEN
	    BEGIN
	    temp = .currentfilepage + 1;	! GET # OF NEXT PAGE IN FILE

	    !+
	    !    LOAD THE PAGE WE WANT RIGHT NOW.
	    !-

	    getwindow (.temp, false);
	    windowptr = .curentbufferadr;	! RESET PTR TO START OF FILE
	    					!  BUFFER
	    room = rms$k_page_size		! AND AMOUNT LEFT
	    END;

	IF .wordcount LSS .room THEN room = .wordcount;

	!+
	!    ASSUME THAT THIS IS A $GET AND SET UP OUT POINTERS
	!-

	SOURCE = .windowptr;			! MOVE FROM FILE PAGE...
	dest = .useradr;			! ...TO USER BUFFER

%IF 0
%THEN

	IF .putflag NEQ false %( MOVE FROM USER TO WINDOW )%
	THEN
	    BEGIN
	    setbfdupd (cbd [bkdbfdadr]);	!INDIC FILE PAGE UPD
	    SOURCE = .useradr;			! GET ADDRESS
	    dest = .windowptr			! AND DESTINATION
	    END;%( OF IF PUTFLAG IS TRUE )%

%FI

	!+
	!    NOW, MOVE THIS RECORD SEGMENT FROM/TO USER BUFFER
	!    This will always be running in a nonzero section.
        !    unless it isn't
	!-

    %IF Section_Zero                                                      !a572
    %THEN
	IF .rmssec NEQ 0
	THEN
	    $rms$xcopy (.SOURCE, .dest, .room)
	ELSE
	    $move_words (.SOURCE, .dest, .room);
    %ELSE
	$rms$xcopy (.SOURCE, .dest, .room);
    %FI

	useradr = .useradr + .room;		! BUMP USER BUFFER POINTER
	windowptr = .windowptr + .room;		! AND WINDOW POINTER
	wordcount = .wordcount - .room
	END;					! OF WHILE WORDCOUNT NEQ ZERO

!+
!    WE HAVE NOW MOVED ALL FULL WORDS IN THE RECORD. WE MUST
!    THEN SEE IF THERE WERE ANY BYTES LEFT OVER TO MOVE ])%

    IF .extrabytes EQL 0 THEN RETURN true;	! No extra bytes to move

!+
!    FIRST, WE MUST CHECK TO SEE IF THESE LAST FEW BYTES
!    WILL OVERLAP INTO THE NEXT PAGE OF THE FILE. IF SO,
!    WE MUST MAP IN THE NEXT FILE PAGE AND MOVE THE BYTES
!    IN THE NEW PAGE
!-

    IF ((.curentbufferadr + rms$k_page_size) EQL .windowptr)
    THEN
	BEGIN
	temp = (.currentfilepage + 1);		! GET # OF NEXT FILE PAGE

	IF NOT getwindow (.temp, false) THEN SIGNAL (ff$_window_failed);

	windowptr = .curentbufferadr		! RESET ADDRESS
	END;					! OF IF WINDOW IS EXHAUSTED

    !+
    !    SET UP AN APPROPRIATE BYTE POINTER
    !-

    temp = .bytesize*.extrabytes;		! # OF BITS TO MOVE
    temp = (.temp^6) + nullbp;			! FORM LH OF PTR
    windowptr<lh> = .temp;			!GET LOCAL BP TO WINDOW

    !+
    !   Move the last few bytes, using a 2-word global
    !   This code always runs in a nonzero section
    !-

    BEGIN
    buf2ptr [1] = .useradr;
    buf2ptr<lh> = .temp OR %O'40';		!2-WORD BP
    buf2ptr<rh> = 0;
    $ildb (temp, windowptr);
    $idpb (temp, buf2ptr)
    END;
    RETURN ss$_normal;
    END;					! End routine MOVEREC

%FI
%SBTTL 'EBC_NEW_BLOCK - skip remainder of EBCDIC block'

GLOBAL ROUTINE ebc_new_block =
    BEGIN

    STACKLOCAL
	block_length;				! Must be on stack

    LOCAL
	nrp,					! Current NRP
	bytes_to_skip;				! Amount to add to it

    nrp = .rst [rst$g_next_record_pointer];
    bytes_to_skip = rms$k_ebc_b_p_bl - 		!
    ((.nrp + rms$k_ebc_b_p_bl) MOD rms$k_ebc_b_p_bl);

    IF .bytes_to_skip EQL rms$k_ebc_b_p_bl	! Fix if on boundary
    THEN
	bytes_to_skip = 0;

    nrp = .nrp + .bytes_to_skip;		! Point at next block
    rst [rst$g_next_record_pointer] = .nrp;	! Set RST

    !+
    !	Handle variable and fixed blocks differently.
    !	Variable blocks must be read in and then have
    !	the block size read from them.  The size of
    !	fixed blocks may be calculated.
    !-

    if .fst [fst$h_rfm] eql fst$k_var		! Variable
    then
	begin

	!+
	!   Get the block in
	!-

	IF NOT g_byte (.nrp)			!
	THEN
	    RETURN false;

	!
	!   Reset block size count (header size accounted for
	!   by EBC_RD_HDR).
	!

	IF NOT ebc_rd_hdr (.stksec or block_length)	! Get block size
	THEN
	    RETURN false;

	rst [rst$g_blkbyt] = .block_length;
	rst [rst$g_next_record_pointer] = 	! Skip block header
	.rst [rst$g_next_record_pointer] + rms$k_header_ebc;
	end
    else
	rst [rst$g_blkbyt] = .fst [fst$h_mrs]*.fab [fab$v_bls];

    RETURN true;
    END;					! End EBC_NEW_BLOCK
%IF NOT Section_zero                                                      !a572
%THEN

%SBTTL 'EA_CH$MOVE -- CH$MOVE for OWGBPs'

GLOBAL ROUTINE ea_ch$move (len, sptr, dptr) =
    BEGIN

    BUILTIN
	machskip;

    STACKLOCAL
	newdptr : VECTOR [2];

    REGISTER
	R1 = 1,
	R2 = 2,
	R3 = 3,
	R4 = 4,
	R5 = 5,
	R6 = 6;

    R1 = R4 = .len;
    R2 = .sptr;
    R5 = .dptr;
    R3 = R6 = 0;
    machskip (%O'123', R1, UPLIT (%O'016'^27, 0));
    newdptr [0] = .R5;
    newdptr [1] = .R6;
    RETURN gptr (.stksec or newdptr);
    END;					! End EA_CH$MOVE
%SBTTL 'GPTR -- transform 2-word BP to OWGBP'
ROUTINE gptr (twoptr : REF $byte_pointer) =
!+
!   GPTR takes a two-word global byte pointer
!   and returns a one-word global byte pointer.
!   It uses the B36%SZ table of the BLISS run-time
!   library.
!-
    BEGIN

    EXTERNAL
	b36_sz : VECTOR;

    LOCAL
	bytesize,
	bytepos,
	transptr,				! Pointer for transform
	newptr;

    IF .twoptr [ptr$v_global_flag]		! Is argument global pointer?
    THEN
	BEGIN					! Process global pointer
	newptr<0, 30> = .twoptr [ptr$a_global_address];
	END
    ELSE
	BEGIN					! Process local pointer

	LOCAL
	    ptr_sec;

	ptr_sec = .twoptr AND %O'007777000000';	! Get the section number
	newptr<0, 30> = .ptr_sec OR .twoptr [ptr$a_local_address];
	END;

    bytesize = .twoptr [ptr$v_byte_size];
    bytepos = .twoptr [ptr$v_byte_position];
    transptr = .b36_sz [.bytesize];
    transptr<lh> = .twoptr [ptr$h_lh] AND NOT %O'000040';
    newptr<30, 6> = CH$RCHAR (.transptr);
    RETURN .newptr;
    END;					! End GPTR
%FI
%SBTTL 'SIX_RD_HDR -- read SIXBIT block/record header'

GLOBAL ROUTINE six_rd_hdr (p_hdr_contents) =
!+
!   Return the length of an SIXBIT record.
!
!   Read the next four bytes of an SIXBIT file into a word.
!   Return the value from the right half of the word, which
!   will be the length of a variable record (if we are pointing
!   at the wrong thing, of course, it will be garbage).
!-
    BEGIN

    BIND
	hdr_contents = .p_hdr_contents;		! Refer to argument

    LOCAL
	bytes_to_move,				! Bytes for this move
	bytes_moved,				! Bytes we did move
	hdr_pointer;				! Point at header buffer

    STACKLOCAL
	hdr_buf;				! Receive header bytes

    !+
    !	Get a buffer if we need it
    !-

    IF .rst [rst$h_byte_count] EQL 0		! Do we need bytes?
    THEN
	BEGIN					! Get next buffer
	rd_buf ();				! Get the next buffer

	IF .rst [rst$v_eof]			! EOF?
	THEN
	    BEGIN
	    rab [rab$h_sts] = rms$_eof;		! Set EOF
	    RETURN false;			! ...
	    END;

	END;

    !
    !	Set up a pointer to the record header
    !
    hdr_pointer = ea_ch$ptr (			! Make a pointer
	.stksec OR hdr_buf, 			!   to a buffer
	0, rms$k_six_size);			!   for the record length
    !
    !	Get the length of the record to get by moving
    !	the four-byte header to a buffer and extracting
    !	the record length from the header.
    !
    bytes_to_move = MIN (			! How much to move
	rms$k_header_six, 			!   Length of header
	.rst [rst$h_byte_count]);		!   Length of file buffer?
    hdr_pointer = ea_ch$move (			! Move the record
	.bytes_to_move, 			!   This many bytes
	.rst [rst$g_page_pointer], 		!   From here
	.hdr_pointer);				!   To here
    rst [rst$g_page_pointer] = CH$PLUS (	! Bump the page pointer
	.rst [rst$g_page_pointer], 		!   ...
	.bytes_to_move);			!   by the amount read
    !
    !	Adjust counters
    !
    bytes_moved = .bytes_to_move;		! This much was moved
    rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .bytes_to_move;

    !+
    !	If the header crosses page boundaries, then we
    !	have not got the whole header, and must get
    !	another buffer and get the rest.
    !-

    IF .bytes_moved NEQ rms$k_header_six	! Not enough?
    THEN
	BEGIN
	rd_buf ();				! Get a buffer

	IF .rst [rst$v_eof]			! EOF?
	THEN
	    BEGIN
	    rab [rab$h_sts] = rms$_eof;		! Set EOF
	    RETURN false;			! ...
	    END;

	bytes_to_move = rms$k_header_six - .bytes_moved;
	!
	!   Get the rest of the header
	!
	hdr_pointer = ea_ch$move (		! Move the rest of header
	    .bytes_to_move, 			!   This many bytes
	    .rst [rst$g_page_pointer], 		!   From here
	    .hdr_pointer);			!   To here
	rst [rst$g_page_pointer] = CH$PLUS (	! Bump the page pointer
	    .rst [rst$g_page_pointer], 		!   ...
	    .bytes_to_move);			!   by the amount read
	!
	!	Adjust counters
	!
	rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .bytes_to_move;
	END;					! Done

    IF .hdr_buf<0, 18, 1> LSS 0			! Don't return negative length
    THEN
	hdr_contents = 0			! So return 0
    ELSE
	hdr_contents = .hdr_buf<rh>;		! Get right halfword

    RETURN true;
    END;					! End SIX_RD_HDR
%SBTTL 'RD_REC -- move a record'

GLOBAL ROUTINE rd_rec =
    BEGIN

    LOCAL
	bytes_per_word,				! Bytes in a word
	bytes_to_get,				! Length of record
	users_buffer,				! Address of user's buffer
	bytes_to_move,				! Length to move
	bytes_moved,				! Bytes moved so far
	bytes_left,				! Space in buffer
	user_pointer;				! User buffer pointer

    bytes_per_word = %BPVAL/.fst [fst$h_bsz];	! Get bytes in a word
    bytes_to_get = .rst [rst$h_record_size];	! Length to read
    bytes_moved = 0;				! Initialize this

    !+
    !	Set up the address of the user's buffer
    !-

    users_buffer = .rab [rab$a_ubf];

    IF .users_buffer<lh> EQL 0			! No section number?
    THEN
	users_buffer = .users_buffer OR .blksec;

    !
    !	Get the size of the user's buffer
    !
    bytes_left = .rab [rab$h_usz]*.bytes_per_word;
    !
    !	Set up the pointer to user's buffer
    !
    user_pointer = ea_ch$ptr (.users_buffer, 0, .fst [fst$h_bsz]);

    !+
    !	Get a buffer if we need it
    !-

    IF .rst [rst$h_byte_count] EQL 0		! Do we need bytes?
    THEN
	BEGIN					! Get next buffer
	rd_buf ();				! Get a buffer

	IF .rst [rst$v_eof]			! EOF?
	THEN
	    BEGIN
	    rab [rab$h_sts] = rms$_eof;		! Set EOF
	    rab [rab$h_rsz] = .bytes_moved;	! Just in case
	    RETURN false;			! ...
	    END;

	END;

    !
    !   Move as much as we need, as will fit,
    !   or as is available, whichever is smaller.
    !
    bytes_to_move = MIN (			! How much to move
	.bytes_to_get, 				! Length of record?
	.bytes_left, 				! Length of user buffer?
	.rst [rst$h_byte_count]);		! Length of file buffer?
    !
    !   Move the data
    !
    user_pointer = ea_ch$move (			! Move the record
	.bytes_to_move, 			! This many bytes
	.rst [rst$g_page_pointer], 		! From here
	.user_pointer);				! To here
    bytes_left = .bytes_left - .bytes_to_move;	! Adjust space left

    !+
    !	Adjust the pointers and counters, etc.
    !-

    rst [rst$g_page_pointer] = CH$PLUS (	! Bump the page pointer
	.rst [rst$g_page_pointer], 		!   ...
	.bytes_to_move);			!   by the amount read
    bytes_moved = .bytes_to_move;		! We moved these
    rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .bytes_to_move;

    !+
    !	Now check to see where we are
    !-

    IF .bytes_moved NEQ .bytes_to_get		! Done?
    THEN
	BEGIN					! Not done yet

	!+
	!   To get here, we either exceeded our user
	!   buffer space or exhausted our file buffer.
	!   Therefore, let's assume that the problem
	!   is not the user, but in ourselves, and so
	!   start a loop to get the rest of the record.
	!   Check for "Record Too Big" error in the loop.
	!-

	DO
	    BEGIN

	    !+
	    !	Check for RTB error
	    !-

	    IF .bytes_left EQL 0		! End of user buffer?
	    THEN
		BEGIN				! Return RTB error
		rab [rab$h_sts] = rms$_rtb;	! Record is too big!
		rab [rab$h_stv] = .bytes_to_get;	! Actual length
		rab [rab$h_rsz] = .bytes_moved;	! Size we got
		rab [rab$a_rbf] = .users_buffer;	! Where we put it
		RETURN false;			! Say this is buggy return
		END;

	    !
	    !	Get a buffer
	    !
	    rd_buf ();				! Get a buffer

	    IF .rst [rst$v_eof]			! EOF?
	    THEN
		BEGIN
		rab [rab$h_sts] = rms$_eof;	! Set EOF
		rab [rab$h_rsz] = .bytes_moved;	! Just in case
		RETURN false;			! ...
		END;

	    !
	    !   Again, move what we still need, what
	    !   fits, or what we have available.
	    !
	    bytes_to_move = MIN (		! How much to move
		.bytes_to_get - .bytes_moved, 	! Remainder of record
		.bytes_left, 			! Length of user buffer?
		.rst [rst$h_byte_count]);	! Length of file buffer?
	    user_pointer = ea_ch$move (		! Move the record
		.bytes_to_move, 		! This many bytes
		.rst [rst$g_page_pointer], 	! Source
		.user_pointer);			! Destination
	    bytes_left = .bytes_left - .bytes_to_move;	! Adjust space

	    !+
	    !	Adjust pointers and counters
	    !-

	    rst [rst$g_page_pointer] = CH$PLUS (	! Bump the page pointer
		.rst [rst$g_page_pointer], 	!   ...
		.bytes_to_move);		!   by the amount read
	    bytes_moved = .bytes_moved + .bytes_to_move;	! Moved these
	    rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .bytes_to_move;
	    END
	UNTIL .bytes_moved EQL .bytes_to_get;

	END;

!   rst [rst$h_record_size] = .bytes_moved;	! Size we got
    RETURN true;
    END;					! End RD_REC
%SBTTL 'RD_WRD -- move a record'

GLOBAL ROUTINE rd_wrd (words_to_get, users_buffer) =
    BEGIN

    LOCAL
	words_to_move,				! Length to move
	words_moved;				! Words moved so far

    words_moved = 0;				! Initialize this

    !+
    !	Get a buffer if we need it
    !-

    IF .rst [rst$h_byte_count] EQL 0		! Do we need words?
    THEN
	BEGIN					! Get next buffer
	rd_buf ();				! Get a buffer

	IF .rst [rst$v_eof]			! EOF?
	THEN
	    BEGIN
	    rab [rab$h_sts] = rms$_eof;		! Set EOF
	    rab [rab$h_rsz] = .words_moved;	! Just in case
	    RETURN false;			! ...
	    END;

	END;

    !
    !   Move as much as we need, as will fit,
    !   or as is available, whichever is smaller.
    !
    words_to_move = MIN (			! How much to move
	.words_to_get, 				! Length of record?
	.rst [rst$h_byte_count]);		! Length of file buffer?
    !
    !   Move the data
    !
%IF Section_Zero                                                        !a572
%THEN
    IF .rmssec NEQ 0
    THEN
    $RMS$XCOPY (.rst [rst$g_page_pointer], 	! From here
	.users_buffer, 				! To here
	.words_to_move)				! How much
    ELSE
    $MOVE_WORDS (.rst [rst$g_page_pointer], 	! From here
	.users_buffer, 				! To here
	.words_to_move);			! How much
%ELSE
    $RMS$XCOPY (.rst [rst$g_page_pointer], 	! From here
	.users_buffer, 				! To here
	.words_to_move);			! How much
%FI
    !
    !	Adjust the pointers and counters, etc.
    !
    rst [rst$g_page_pointer] = .rst [rst$g_page_pointer] + .words_to_move;
    users_buffer = .users_buffer + .words_to_move;	!
    rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .words_to_move;
    words_moved = .words_to_move;		! We moved these

    !+
    !	Now check to see where we are
    !-

    IF .words_moved NEQ .words_to_get		! Done?
    THEN
	BEGIN					! Not done yet

	!+
	!   To get here, we exhausted our file buffer.
	!   Therefore, let's assume that the problem
	!   is not the user, but in ourselves, and so
	!   start a loop to get the rest of the record.
	!-

	DO
	    BEGIN
	    !
	    !	Get a buffer
	    !
	    rd_buf ();				! Get a buffer

	    IF .rst [rst$v_eof]			! EOF?
	    THEN
		BEGIN
		rab [rab$h_sts] = rms$_eof;	! Set EOF
		rab [rab$h_rsz] = .words_moved;	! Just in case
		RETURN false;			! ...
		END;

	    !
	    !   Again, move what we still need, what
	    !   fits, or what we have available.
	    !
	    words_to_move = MIN (		! How much to move
		.words_to_get - .words_moved, 	! Remainder of record
		.rst [rst$h_byte_count]);	! Length of file buffer?

        %IF Section_Zero                                                !a572
        %THEN
	    IF .rmssec NEQ 0
	    THEN
	    $RMS$XCOPY (.rst [rst$g_page_pointer], 	! From here
		.users_buffer, 			! To here
		.words_to_move)			! How much
	    ELSE
	    $MOVE_WORDS (.rst [rst$g_page_pointer], 	! From here
		.users_buffer, 			! To here
		.words_to_move);		! How much
        %ELSE
	    $RMS$XCOPY (.rst [rst$g_page_pointer], 	! From here
		.users_buffer, 			! To here
		.words_to_move);		! How much
        %FI
	    !+
	    !	Adjust pointers and counters
	    !-

	    rst [rst$g_page_pointer] = .rst [rst$g_page_pointer] + 	!
	    .words_to_move;
	    users_buffer = .users_buffer + .words_to_move;
	    rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .words_to_move;
	    words_moved = .words_moved + .words_to_move;	! Moved these
	    END
	UNTIL .words_moved EQL .words_to_get;

	END;

    RETURN true;
    END;					! End RD_WRD
%SBTTL 'RD_BUF -- read next buffer'

GLOBAL ROUTINE rd_buf =
    BEGIN

    LOCAL
	bytes_per_word,				! Bytes in a word
	new_bkt_no,				! New bucket to get
	new_bucket,				! Address of new bucket
	bucket_words,				! Number of words in bucket
	bucket_bytes;				! Number of bytes in bucket

    bytes_per_word = %BPVAL/.fst [fst$h_bsz];	! Get bytes in a word

    !+
    !	If there is no current bucket, then
    !	let us get ourselves the first bucket
    !	in the file.  Otherwise, we will get
    !	that bucket which follows the current bucket.
    !-

    IF .cbd [bkt$a_address] EQL 0		! No bucket?
    THEN
	new_bkt_no = 0				! Bucket 0
    ELSE
	BEGIN
	new_bkt_no = .cbd [bkt$h_number] + 1;	! Next bucket
	!
	!   Get rid of old bucket
	!

	if not free_bucket (rab = .rab, desc = .cbd)	!
	then
	    return false;

	END;

    !+
    !	Check to see if this bucket is beyond EOF.  If
    !	the first byte in the bucket is greater than or
    !	equal to the size of the file, return EOF.
    !-

    IF (.new_bkt_no*.bytes_per_word*rms$k_w_p_bkt) GEQ .fst [fst$g_sof]	!
    THEN
	BEGIN
	rst [rst$v_eof] = 1;
	RETURN false;
	END;

    !+
    !	We now know we have a bucket there, so we can
    !	read it in with no fears.
    !-

    IF Get_Bucket (Rab = .Rab, 			! Get a bucket
	    Desc = .cbd, 			! Put it here
	    Bucket = .new_bkt_no, 		! This one
	    Bucket_Size = rms$k_buffer_size	! This big
	) EQL false
    THEN
	BEGIN
	SIGNAL (ff$_bkt_get_failed);
	RETURN false
	END;

    new_bucket = .rmssec OR .cbd [bkt$a_address];	! Point at bucket

    !+
    !	Create a byte pointer to the beginning of the bucket
    !-

    SELECTONE .fst [fst$h_bsz] OF
	SET

	[6, 7, 8, 9, 18] :
	    rst [rst$g_page_pointer] = 		!
	    ea_ch$ptr (.new_bucket, 0, .fst [fst$h_bsz]);

	[OTHERWISE] :
	    rst [rst$g_page_pointer] = 		!
	    .new_bucket;			! Point at the word itself
	TES;

    bucket_words = .fst [fst$g_sof]/.bytes_per_word - 	!
    .new_bkt_no*rms$k_w_p_bkt;

    IF .bucket_words GEQ rms$k_w_p_bkt		! Full bucket?
    THEN
	rst [rst$h_byte_count] = rms$k_w_p_bkt*.bytes_per_word	! Yes - full
    ELSE
	rst [rst$h_byte_count] = .bucket_words*.bytes_per_word;	! No - partial

    RETURN true;
    END;					! End RD_BUF
%SBTTL 'EBC_RD_HDR -- read EBCDIC block/record header'

GLOBAL ROUTINE ebc_rd_hdr (p_hdr_contents) =
!+
!   Return the length of an EBCDIC variable block or record.
!
!   Read the next four bytes of an EBCDIC file into a word.
!   Return the value from the left half of the word,which
!   will be the length of either a block of variable records
!   or a variable record itself (if we are pointing at the
!   wrong thing, of course, it will be garbage).
!-
    BEGIN

    BIND
	hdr_contents = .p_hdr_contents;		! Refer to argument

    LOCAL
	bytes_to_move,				! Bytes for this move
	bytes_moved,				! Bytes we did move
	hdr_pointer;				! Point at header buffer

    STACKLOCAL
	hdr_buf;				! Receive header bytes

    !+
    !	Get a buffer if we need it
    !-

    IF .rst [rst$h_byte_count] EQL 0		! Do we need bytes?
    THEN
	BEGIN					! Get next buffer
	rd_buf ();				! Get an EBCDIC buffer

	IF .rst [rst$v_eof]			! EOF?
	THEN
	    BEGIN
	    rab [rab$h_sts] = rms$_eof;		! Set EOF
	    RETURN false;			! ...
	    END;

	END;

    !
    !	Set up a pointer to the record header
    !
    hdr_pointer = ea_ch$ptr (			! Make a pointer
	.stksec OR hdr_buf, 			!   to a buffer
	0, rms$k_ebc_size);			!   for the record length
    !
    !	Get the length of the record to get by moving
    !	the four-byte header to a buffer and extracting
    !	the record length from the header.
    !
    bytes_to_move = MIN (			! How much to move
	rms$k_header_ebc, 			!   Length of header
	.rst [rst$h_byte_count]);		!   Length of file buffer?
    hdr_pointer = ea_ch$move (			! Move the record
	.bytes_to_move, 			!   This many bytes
	.rst [rst$g_page_pointer], 		!   From here
	.hdr_pointer);				!   To here
    rst [rst$g_page_pointer] = CH$PLUS (	! Bump the page pointer
	.rst [rst$g_page_pointer], 		!   ...
	.bytes_to_move);			!   by the amount read
    !
    !	Adjust counters
    !
    bytes_moved = .bytes_to_move;		! This much was moved
    rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .bytes_to_move;

    !+
    !	If the header crosses page boundaries, then we
    !	have not got the whole header, and must get
    !	another buffer and get the rest.
    !-

    IF .bytes_moved NEQ rms$k_header_ebc	! Not enough?
    THEN
	BEGIN
	rd_buf ();				! Get an EBCDIC buffer

	IF .rst [rst$v_eof]			! EOF?
	THEN
	    BEGIN
	    rab [rab$h_sts] = rms$_eof;		! Set EOF
	    RETURN false;			! ...
	    END;

	bytes_to_move = rms$k_header_ebc - .bytes_moved;
	!
	!   Get the rest of the header
	!
	hdr_pointer = ea_ch$move (		! Move the rest of header
	    .bytes_to_move, 			!   This many bytes
	    .rst [rst$g_page_pointer], 		!   From here
	    .hdr_pointer);			!   To here
	rst [rst$g_page_pointer] = CH$PLUS (	! Bump the page pointer
	    .rst [rst$g_page_pointer], 		!   ...
	    .bytes_to_move);			!   by the amount read
	!
	!	Adjust counters
	!
	rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .bytes_to_move;
	END;					! Done

    IF .hdr_buf<lh> LSS rms$k_header_ebc	! Don't return negative length
    THEN
	hdr_contents = 0			! So return 0
    ELSE
	hdr_contents = .hdr_buf<lh> - rms$k_header_ebc;	! Get left halfword

    RETURN true;
    END;					! End EBC_RD_HDR
%SBTTL 'G_BYTE -- set up window to given byte'

GLOBAL ROUTINE g_byte (byte_number) =
    BEGIN

    LOCAL
	bytes_per_word,				! File bytes per word
	new_bucket,				! Address of new bucket
	byte_offset,				! Character offset in page
	file_word,				! Word containing first byte
	page_number;				! Page containing first byte

    !+
    !	Check for EOF
    !-

    IF .byte_number GEQ .fst [fst$g_sof]	! Past EOF?
    THEN
	BEGIN
	!
	!   Free the current bucket and return EOF
	!

	if not free_bucket (rab = .rab, desc = .cbd)	!
	then
	    return false;

	rab [rab$h_sts] = rms$_eof;		! Return EOF
	RETURN false;				! Return an error
	END;

    bytes_per_word = %BPVAL/.fst [fst$h_bsz];
    !
    !	Calculate byte offset in the page
    !
    byte_offset = .byte_number MOD (rms$k_w_p_pg*.bytes_per_word);
    !
    !	What page interests us?
    !
    page_number = .byte_number/(rms$k_w_p_pg*.bytes_per_word);	! Shift it a little

    !+
    !	If a current bucket exists, then we have to get
    !	rid of it unless the bucket happens to be the one
    !	we are interested in (which would be convenient).
    !-

    IF .cbd [bkt$a_address] NEQ 0		! Bucket exists?
    THEN
	BEGIN

	!+
	!   A bucket is already current.  If it
	!   is not the bucket we want, then we
	!   rid ourselves of the old bucket and
	!   get the one we desire.
	!-

	IF .cbd [bkt$h_number] NEQ .page_number	! Do we want it?
	THEN
	    BEGIN

	    if not free_bucket (rab = .rab, desc = .cbd)	!
	    then
		return false;

	    IF Get_Bucket (Rab = .Rab, 		! Get a bucket
		    Desc = .cbd, 		! Put it here
		    Bucket = .page_number, 	! This one
		    Bucket_Size = rms$k_buffer_size	! This big
		) EQL false
	    THEN
		BEGIN
		SIGNAL (ff$_bkt_get_failed);
		RETURN false
		END;

	    END;

	END
    ELSE
	BEGIN					! No current bucket

	IF Get_Bucket (Rab = .Rab, 		! Get a bucket
		Desc = .cbd, 			! Put it here
		Bucket = .page_number, 		! This one
		Bucket_Size = rms$k_buffer_size	! This big
	    ) EQL false
	THEN
	    BEGIN
	    SIGNAL (ff$_bkt_get_failed);
	    RETURN false
	    END;

	END;

    !+
    !	Figure the bytes left in this bucket.
    !-

    BEGIN

    LOCAL
	beg_of_bucket;

    beg_of_bucket = .page_number*rms$k_w_p_bkt;

    !+
    !	If EOF is somewhere in this bucket then
    !	set the byte count to represent a partial
    !	bucket; otherwise, we have a full bucket.
    !-

    IF (.fst [fst$g_sof] - .beg_of_bucket) GEQ rms$k_w_p_bkt	!
    THEN
	rst [rst$h_byte_count] = .fst [fst$g_sof] - .beg_of_bucket
    ELSE
	rst [rst$h_byte_count] = rms$k_w_p_bkt;	! Full bucket

    !
    !	Decrement the number of bytes in this
    !	bucket by the offset (the amount "already
    !	used").
    !
    rst [rst$h_byte_count] = .rst [rst$h_byte_count] - .byte_offset;
    END;
    !
    !	Set the page pointer to look at
    !	the correct byte in the page.
    !
    new_bucket = .rmssec OR .cbd [bkt$a_address];

    SELECTONE .fst [fst$h_bsz] OF
	SET

	[6, 7, 8, 9, 18] :
	    rst [rst$g_page_pointer] = 		!
	    ea_ch$ptr (.new_bucket, .byte_offset, .fst [fst$h_bsz]);

	[OTHERWISE] :
	    rst [rst$g_page_pointer] = 		!
	    .new_bucket + .byte_offset;		! Point at the word itself
	TES;

    RETURN true;
    END;					! End G_BYTE

END
ELUDOM