Google
 

Trailing-Edge - PDP-10 Archives - tops20-v7-ft-dist1-clock - 7-sources/diujb2.b36
There are 4 other files named diujb2.b36 in the archive. Click here to see a list.
%TITLE 'DIU Slave Job Control Routines'

MODULE DIUJB2 (IDENT = '253',
               ENTRY(j$start,           ! Start a subjob
                     j$kill,            ! Kill a subjob
                     j$death,           ! Process job death notice
                     abort              ! Abort a chain of dependent requests
                     )
               ) =
BEGIN
!++
!	COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1986.
!	ALL RIGHTS RESERVED.
!
!	THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED  AND
!	COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
!	THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS  SOFTWARE  OR
!	ANY  OTHER  COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
!	AVAILABLE TO ANY OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE
!	SOFTWARE IS HEREBY TRANSFERRED.
!
!	THE INFORMATION IN THIS SOFTWARE IS  SUBJECT  TO  CHANGE  WITHOUT
!	NOTICE  AND  SHOULD  NOT  BE CONSTRUED AS A COMMITMENT BY DIGITAL
!	EQUIPMENT CORPORATION.
!
!	DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF
!	ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
! FACILITY:
!
!       Data Interchange Utility.
!
! ABSTRACT:
!
!       This module  contains  the  job controller  for  DIU-20.   Each  queued
!       request is processed by creating a job with the CRJOB JSYS, with DIU as
!       the top  fork, loading  the request  number, job  handle and  a  unique
!       number into  the job's  ACs, then  starting the  job at  the CCL  entry
!       point.  This module handles job creation, deletion, and monitoring.
!
! ENVIRONMENT:
!
!       BLISS-36 V4  TOPS-20 V6.1  XPORT V4
! HISTORY:
!
!  253  Change IPCF20 library to DIUIP2.
!       Gregory A. Scott 1-Jul-86
!
!  200  If the IPCLO message specifies that a job that killed the slave job  is
!       -1, then the job that killed the slave job has already logged out.
!       Gregory A. Scott 22-May-86
!
!  154  Write better information in the user log when the job can't be created.
!       Rename s$crejob  to  j$create (since  the  s$ prefix  implies  DIUT20).
!       Rename kill_job  to  j$kill.   Rename  start_job  to  j$start.   Remove
!       s$kiljob.  Rename s$death to j$death.
!       Gregory A. Scott 12-May-86
!
!  152  Give error messages to user log file when the job is cancelled/aborts.
!       Use new routines lj$event and lj$uevent. 
!       Gregory A. Scott 11-May-86
!
!  147  Delete references to usrlog.
!       Gregory A. Scott 8-May-86
!
!  134  Give a little better message when killing a job.
!       Gregory A. Scott 30-Apr-86
!
!  126  Module name should match filename, so now this module is called DIUJB2.
!       S$TIMINT was  being  called  without a  channel  argument,  making  the
!       interrupt system goofy; S$TIMINT now uses t_channel always.
!       Gregory A. Scott 26-Apr-86
!
!  122  Range of  error  messages checked  from  CRJOB in  S$CREJOB  should  be
!       [OPNX12 TO OPNX1] rather than [OPNX12 TO 18].  Abort requests that have
!       jobs that cannot be created.  Say  nothing about jobs not mine  logging
!       out since this it is possible to get a CRJOB death interrupt on a CRJOB
!       failure (this is apparently a monitor "feature").
!       Gregory A. Scott 22-Apr-86
!
! 47	Make routine S$CREJOB return more intelligent messages after
!	CRJOB JSYS call.  Also, make it return secondary error message.
!	Sandy Clemens	4-Nov-85
!--

! TABLE OF CONTENTS:

FORWARD ROUTINE
    j$start : NOVALUE,                  ! Start a subjob
    j$kill,                             ! Kill an active subjob
    reljsb : NOVALUE,                   ! Release JOBSTATUS block
    j$create,                           ! Create and start job
    j$death : NOVALUE,                  ! Process job death notice
    dispose : NOVALUE,                  ! Dispose of a job properly
    abort : NOVALUE;                    ! Abort a chain of dependent requests

! INCLUDE FILES:

LIBRARY 'BLI:XPORT';
LIBRARY 'TOPS20';
LIBRARY 'DIU';
LIBRARY 'DIUIP2';
! EQUATED SYMBOLS:

LITERAL
    requeue_time = (%O'1000000' / (24 * 60)) * 10;      ! Ten minutes


! OWN STORAGE:

OWN
    acjrequeue : INITIAL (1); ![5] PATCHABLE nonzero to requeue on ACJ failures

GLOBAL
    jobstatus : BLOCKVECTOR [DIU$K_MAX_MJOB, DIUJ$K_LEN]
                FIELD (DIUJ$$JOBSTAT_FIELDS);

OWN
    serial_number : INITIAL (1);
! EXTERNAL REFERENCES:

EXTERNAL
    njob,                               ! Number of jobs currently actice
    shutdown,                           ! 1 if shutdown in progress
    rcvpid;                             ! Spooler's named pid

EXTERNAL ROUTINE
    lj$event,                           ! Log an event about slave to sys log
    l$event,                            ! Log an event to sys log
    lj$uevent,                          ! Log an event about slave to user log
    l$uevent,                           ! Log an event to user log
    q$pick,                             ! Pick a request from the queue
    q$modify,                           ! Modify a request
    q$reque,                            ! Requeue a request
    q$find,                             ! Find a chain of requests
    q$delete,                           ! Delete a request
    q$release_chain : NOVALUE,          ! Free memory returned by q$find
    a$account : NOVALUE,                ! Perform usage accounting
    s$time,                             ! Return system time
    s$timint : NOVALUE,                 ! Set timer interrupt
    s$noint : NOVALUE,                  ! Turn off interrupt system
    s$okint : NOVALUE,                  ! Turn on interrupt system
    s$jobno,                            ! Return the job number
    s$jobusr,                           ! Get user number from job number
    s$username : NOVALUE,               ! Get user name from user number
    sp$shut : NOVALUE,                  ! shutdown the spooler
    notify : NOVALUE,                   ! Notify the user of an event
    sched : NOVALUE,                    ! Schedule jobs for running
    q$req_block_init : NOVALUE;         ! Zero a fresh request block
GLOBAL ROUTINE j$start (p_req_block) : NOVALUE =
BEGIN
!++
! FUNCTIONAL DESCRIPTION:
!
!       Start a job.  Must be called with interrupts disabled (S$NOINT).
!
! FORMAL PARAMETERS:
!
!       p_req_block: pointer to request block
!--
BIND req_block = .p_req_block : $DIU_BLOCK;

LOCAL job_handle,
      job,
      retcode,
      fail_mess_desc : $STR_DESCRIPTOR(CLASS=DYNAMIC);

! Find a free job status block.

job_handle = (INCR index FROM 0 TO DIU$K_MAX_MJOB - 1
              DO IF NOT .jobstatus[.index, DIUJ$V_INUSE]
                 THEN EXITLOOP .index);

IF .job_handle EQL -1                   ! We must be able to find one
THEN SIGNAL (DIU$_BUG);

! Assign and init job status block

serial_number = .serial_number + 1;
jobstatus[.job_handle, DIUJ$G_SERIAL_NUMBER] = .serial_number;
jobstatus[.job_handle, DIUJ$V_BITS] = 0;
jobstatus[.job_handle, DIUJ$V_INUSE] = 1;
jobstatus[.job_handle, DIUJ$G_JOB_CREATE_TIME] = s$time();
jobstatus[.job_handle, DIUJ$H_REQUEST_ID] = .req_block[DIU$H_REQUEST_ID];
jobstatus[.job_handle, DIUJ$G_BLOCKS_READ] = 0;
jobstatus[.job_handle, DIUJ$G_BLOCKS_WRITTEN] = 0;
jobstatus[.job_handle, DIUJ$G_PACKETS_XFERRED] = 0;
jobstatus[.job_handle, DIUJ$G_LAST_ERROR] = 0;
jobstatus[.job_handle, DIUJ$G_2ND_CODE] = 0;
jobstatus[.job_handle, DIUJ$A_REQ_BLOCK] = 0;
jobstatus[.job_handle, DIUJ$G_JOB_RUNTIME] = 0; ![4] 
$STR_DESC_INIT (DESCRIPTOR = jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT],
                CLASS = DYNAMIC);

! Count this job as active for now.  If it doesn't get started we still get
! a subjob death message from the monitor.

njob = .njob + 1;           ! Count it as active please

! Try to create and start the job

IF retcode = j$create (.req_block[DIU$H_REQUEST_ID], job, .job_handle)
THEN BEGIN
     jobstatus[.job_handle, DIUJ$H_JOB_NUMBER] = .job;
     RETURN(DIU$_NORMAL);
     END;

! Job creation failed.  Start a string to describe the failure

$STR_DESC_INIT(DESC=fail_mess_desc, CLASS=DYNAMIC,
               STRING=$STR_CONCAT('Request ',
                                $STR_ASCII (.req_block[DIU$H_REQUEST_ID]),
                                ' (',
                                (.req_block[DIU$H_JOBNAME],
                                 CH$PTR (req_block[DIU$T_JOBNAME])),
                                ') '));

! See if we are requeueing the request or cancelling it.  If we failed because
! there was a serious CRJOB failure or acj denied access (and we are not
! requeueing that), requeue the job; otherwise, cancel the the request.

IF (.retcode EQL DIU$_CANT_CREATE_JOB)
   OR (.retcode EQL DIU$_ACJ_DENIED_ACCESS AND .acjrequeue EQL 0)
THEN BEGIN                              ! We want to cancel the request
     jobstatus[.job_handle, DIUJ$V_FLUSH_REQUEST] = 1;
     jobstatus[.job_handle, DIUJ$G_LAST_ERROR] = .retcode;
     jobstatus[.job_handle, DIUJ$G_2ND_CODE] = .job;
     $STR_APPEND(TARGET = fail_mess_desc,
                 STRING = 'killed');
     $STR_COPY(TARGET = jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT],
               STRING = fail_mess_desc);
     dispose(.job_handle);         ! Get rid of this guy
     END
ELSE BEGIN                              ! we want to requeue the request
     $STR_APPEND(TARGET = fail_mess_desc,
                 STRING = 'requeued');
     q$reque (.req_block[DIU$H_REQUEST_ID]);       ! Requeue
     s$timint(s$time()+requeue_time);      ! Post timer interrupt
     END;

! Log what we were doing

L$UEVENT(.retcode, .job, fail_mess_desc, req_block);    ! User log
L$EVENT(.retcode, .job, fail_mess_desc);                ! System log

! Clean up after ourselves and return

$XPO_FREE_MEM(STRING=fail_mess_desc);   ! Thanks for the memory
reljsb(.job_handle);                    ! Release job stg block stg

END;                                    ! j$start
GLOBAL ROUTINE j$kill (request_ID, reason) =
!++
! FUNCTIONAL DESCRIPTION:
!   Kill an active job.  This routine logs out the slave job, and sets
!   some flags so that when the monitor's report of the job's logging
!   out arrives, the request is deleted and the user notified.
!
! FORMAL PARAMETERS:
!   request_ID          - obvious
!
! IMPLICIT INPUTS:
!   jobstatus table
!
! IMPLICIT OUTPUTS:
!   jobstatus table
!
! ROUTINE VALUE and
! COMPLETION CODES:
!   The jobstatus handle is returned, or -1 if no entry exists.
!
! SIDE EFFECTS:
!   NONE
!
!--
    BEGIN

    LOCAL
	job_handle;

    s$noint ();
    job_handle =
        (INCR index FROM 0 TO DIU$K_MAX_MJOB - 1
         DO
             IF .jobstatus[.index, DIUJ$H_REQUEST_ID] EQL .request_ID
                 AND .jobstatus[.index, DIUJ$V_INUSE]
             THEN
                 EXITLOOP .index);
    !
    ! If we can't find it, maybe it already finished on its own.  If so,
    ! or if logout already pending, just quit.
    !
    IF (.job_handle EQL -1)
    THEN
        BEGIN
        s$okint ();
        RETURN (-1)
        END;
    !
    ! OK, zap the sucker.
    !
    jobstatus[.job_handle, DIUJ$V_FLUSH_REQUEST] = 1;
    jobstatus[.job_handle, DIUJ$V_FORCED_LOGOUT_PENDING] = 1;
    jobstatus[.job_handle, DIUJ$G_LAST_ERROR] = .reason;
    LGOUT(.jobstatus[.job_handle, DIUJ$H_JOB_NUMBER]);
    s$okint ();
    RETURN (.job_handle)
    END;                                ! End of j$kill
ROUTINE reljsb (job_handle) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!   Release job status block.
!
! FORMAL PARAMETERS:
!   job_handle          - index into jobstatus table
!
! IMPLICIT INPUTS:
!   NONE
!
! IMPLICIT OUTPUTS:
!   NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
!   NONE
!
! SIDE EFFECTS:
!   NONE
!
!--
    BEGIN

    LOCAL req_block : REF $DIU_BLOCK;

    IF .job_handle GTR DIU$K_MAX_MJOB - 1
        OR NOT .jobstatus[.job_handle, DIUJ$V_INUSE]
    THEN
        SIGNAL (DIU$_BUG);
    !
    ! Release request block if we have one
    !
    IF (req_block = .jobstatus[.job_handle, DIUJ$A_REQ_BLOCK]) NEQ 0
    THEN
        $XPO_FREE_MEM (BINARY_DATA = (DIU$K_LEN, .req_block, UNITS));
    jobstatus[.job_handle, DIUJ$A_REQ_BLOCK] = 0;
    !
    ! Release extra text string, if any
    !
    $XPO_FREE_MEM (STRING = jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT]);
    !
    ! Free up this jobstatus slot
    !
    jobstatus[.job_handle, DIUJ$V_BITS] = 0;
    jobstatus[.job_handle, DIUJ$H_REQUEST_ID] = 0;
    jobstatus[.job_handle, DIUJ$H_JOB_NUMBER] = 0;
    !
    ! Decrement count of active streams.  If now zero, and shutdown pending,
    ! finish the shutdown.
    !
    IF (njob = .njob - 1) EQL 0
    THEN IF .shutdown
         THEN SP$SHUT();
    END;                                ! End of reljsb
ROUTINE j$create (req_id, job, job_handle) =
!++
! FUNCTIONAL DESCRIPTION:
!   Create, log in, and start a job to process a specified request.
!
! FORMAL PARAMETERS:
!   req_id      - request_ID to process
!   job         - addr of cell in which to return job number of created job
!   job_handle  - index into jobstatus table
!
! IMPLICIT INPUTS:
!   NONE
!
! IMPLICIT OUTPUTS:
!   The cell whose address is in JOB is updated with the job number of the
!   created job.  We allocate dynamic memory for a request block and link
!   it to the jobstatus block.  This block must be released (eventually)
!   by the caller.
!
! COMPLETION CODES:
!   DIU$_NORMAL                 - successful completion
!   DIU$_NO_JOB_SLOTS           - system full
!    or any error code returned from q$pick
!
! SIDE EFFECTS:
!   Many.  A job is created and logged in.  The monitor is instructed
!   to send an IPCF message to .rcvpid when the job is logged out.
!
!--
    BEGIN
    !  If DEBUG mode, don't start job until attached to (CJ_WTA)
    !                 and use DIUDEB.EXE instead of DIU.EXE
    BIND cjbits=UPLIT(%IF %SWITCHES (DEBUG) %THEN CJ_WTA OR %FI
                      CJ_LOG OR CJ_NAM OR CJ_FIL OR CJ_ACS OR CJ_NPW
                      OR CJ_NUD OR CJ_SLO OR CJ_CAM OR FLD($CJUAA, CJ_ACT)),
         cjfile=UPLIT(%IF %SWITCHES (DEBUG)
                      %THEN %ASCIZ 'SYS:DIUDEB.EXE'
                      %ELSE %ASCIZ 'SYS:DIU.EXE'
                      %FI);
    LOCAL
        retcode,
	p_req_block,
        crjob_args : VECTOR [$CJSLO + 1],
        crjob_acs : VECTOR [16],
        job_number;

    $XPO_GET_MEM (UNITS = DIU$K_LEN, RESULT = p_req_block);
        !
        ! Block to hold bound value of req_block
        !
        BEGIN
        BIND
            req_block = .p_req_block : $DIU_BLOCK;
        q$req_block_init (req_block);
        !
        ! Fetch request block and mark request as active
        !
        req_block[DIU$H_REQUEST_ID] = .req_ID;
        IF NOT (retcode = q$pick (req_block))
        THEN
            BEGIN
            $XPO_FREE_MEM (BINARY_DATA = (DIU$K_LEN, req_block, UNITS));
            RETURN (.retcode);
            END;
        !
        ! Link request block to jobstatus block
        !
        jobstatus[.job_handle, DIUJ$A_REQ_BLOCK] = req_block;
        !
        ! Set up CRJOB arguments
        !
        crjob_args[$CJNAM] = CH$PTR (req_block[DIU$T_USERNAME]);
        crjob_args[$CJPSW] = 0;
        crjob_args[$CJACT] = CH$PTR (req_block[DIU$T_ACCOUNT]);
        crjob_args[$CJFIL] = CH$PTR (CjFile);
        crjob_args[$CJSFV] = 1;
        crjob_args[$CJTTY] = $NULIO;
        crjob_args[$CJTIM] = 0;
        crjob_args[$CJACS] = crjob_acs;
        crjob_args[$CJEXF] = 0;
        crjob_args[$CJPRI] = ($NULIO ^ 18) + $NULIO;
        crjob_args[$CJCPU] = 0;
        crjob_args[$CJCAM] = .req_block[DIU$G_CAPABILITIES];
        crjob_args[$CJSLO] = .rcvpid;
        !
        ! Put the request-ID into AC15 of slave job (1st formal of main rtn),
        !  the job handle into AC9 of slave job (2nd formal of main rtn),
        !  and serial number into AC7 of slave job (3rd formal of main rtn)
        !
        crjob_acs[15] = .req_ID;
        crjob_acs[9] = .job_handle;
        crjob_acs[7] = .jobstatus[.job_handle, DIUJ$G_SERIAL_NUMBER];

        !
        ! Try to create the job.
        !
        IF CRJOB( .cjbits, crjob_args, 0; job_number )
        THEN
            BEGIN
            (.job) = .job_number;
            RETURN (DIU$_NORMAL)
            END
        ELSE
            BEGIN
            .job = .job_number;         ! Pass back the TOPS-20 error code
            RETURN (                    ! Return DIU error code
                    SELECTONE .job_number
                    OF
                    SET
                    [GJFX1 TO GJFX24, GJFX27, GJFX28,   ! GTJFN/OPENF errors
                     GJFX30 TO GJFX35, GJFX36, GJFX39,
                     GJFX40, GJFX44, GJFX45 TO GJFX47,
                     OPNX1 TO OPNX10, OPNX12 TO OPNX18]: DIU$_CANT_GET_DIU;
                    [GOKER2] : DIU$_ACJ_DENIED_ACCESS;
                    [CRJBX6] : DIU$_NO_JOB_SLOTS;
                    [OTHERWISE] : DIU$_CANT_CREATE_JOB;
                        TES
                   );
            END;
        END;
    END;                                ! End of j$create
GLOBAL ROUTINE j$death (p_pdb) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!
!       Process a  monitor-generated  subjob  death report.   This  routine  is
!       always called at  interrupt level in  response to receipt  of the  IPCF
!       message.  Note  that we  can  call the  Q$xxxx routines  with  impunity
!       because the fact that we're running as an interrupt routine  guarantees
!       no one else will simultaneously try to call them.
!
! FORMAL PARAMETERS:
!
!       p_pdb: pointer to packet descriptor block for death message
!
!--
BEGIN

BIND pdb = .p_pdb : $$PDB_DECL,         ! IPCF message data block pointer
     msg = .pdb[PDB$$H_MESSAGE_ADDRESS] : VECTOR [9],   ! The message itself
     flags = msg[2],
     connect_time = msg[3],
     runtime = msg[4],
     killer = msg[6],
     last_error = msg[8];

LOCAL job,
      job_handle,
      oldest;

job = .(msg[1])<rh>;

! There may be more than one match.  By the time we get this message,
! the old job is probably gone and the job number may have already been
! recycled.  For this reason, we must assume duplicates possible, and
! choose the one with the lower serial number (created earlier).

job_handle = -1;
INCR index FROM 0 TO DIU$K_MAX_MJOB - 1
DO IF .jobstatus[.index, DIUJ$H_JOB_NUMBER] EQL .job
      AND .jobstatus[.index, DIUJ$V_INUSE]
   THEN IF .job_handle EQL -1           ! First candidate?
        THEN BEGIN                      ! Yes, believe it
             job_handle = .index;
             oldest = .jobstatus[.index, DIUJ$G_SERIAL_NUMBER];
             END
        ELSE IF .jobstatus[.index, DIUJ$G_SERIAL_NUMBER] LSS .oldest
             THEN BEGIN
                  job_handle = .index;
                  oldest = .jobstatus[.index, DIUJ$G_SERIAL_NUMBER];
                  END;

IF .job_handle EQL -1                   ! If we didn't find ethe job
THEN RETURN (DIU$_NORMAL);              ! then it could be a CRJOB failure

jobstatus[.job_handle, DIUJ$G_RUNTIME] = .runtime;

! Write a entry to the log file if it was a forced logout

IF (.flags AND SP_FLO) NEQ 0            ! Forced logout (because of error
THEN BEGIN                              !  in job)?
     lj$event(DIU$_SLAVE_ABNORMAL, .last_error, 0, .job_handle);        ! sys
     lj$uevent(DIU$_SLAVE_ABNORMAL, .last_error, 0, .job_handle);       ! usr
     END;

! Write an event to the log file if it was a logout by another job.

IF (.flags AND SP_OLO) NEQ 0            ! Forced logout by another job
THEN BEGIN
     IF .killer EQL s$jobno ()          ! Did I kill the job?
     THEN BEGIN                         ! Yes, log the logout please
          lj$event(DIU$_KILLED_BY_USER, 0, 
                   jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT], 
                   .job_handle);
          lj$uevent(DIU$_KILLED_BY_USER, 0,
                    jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT],
                    .job_handle);
          END
     ELSE BEGIN
          LOCAL user_descr : $STR_DESCRIPTOR (CLASS = DYNAMIC),
                line_descr : $STR_DESCRIPTOR (CLASS = DYNAMIC);
          $STR_DESC_INIT (DESCRIPTOR = user_descr, CLASS = DYNAMIC);
          $STR_DESC_INIT (DESCRIPTOR = line_descr, CLASS = DYNAMIC);
          IF .killer EQL -1             ! Job that killed us logged out?
          THEN $STR_COPY (TARGET = line_descr,
                          STRING = 'Request killed by job that logged out immediately')
          ELSE BEGIN
               s$username (s$jobusr(.killer), user_descr);
               $STR_COPY (TARGET = line_descr,
                          STRING = $STR_CONCAT ('Request killed by job ',
                                                $STR_ASCII (.killer, BASE10),
                                                ' user ',
                                                user_descr));
               END;
          lj$event(DIU$_KILLED_BY_USER, 0, line_descr, .job_handle);    ! sys
          lj$uevent(DIU$_KILLED_BY_USER, 0, line_descr, .job_handle);   ! usr
          $XPO_FREE_MEM (STRING = user_descr);
          $XPO_FREE_MEM (STRING = line_descr);
          END;
     END;

! Dispose of the request

dispose (.job_handle);

! Release job-related storage, and call the scheduler to maybe start
! next job

reljsb(.job_handle);
SCHED();
END;                                    ! End of j$death
ROUTINE dispose (job_handle) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!   Dispose of a job that has been logged out, either voluntarily or
!   involuntarily.
!
! FORMAL PARAMETERS:
!   job_handle          - jobstatus index
!
! IMPLICIT INPUTS:
!   NONE
!
! IMPLICIT OUTPUTS:
!   NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
!   NONE
!
! SIDE EFFECTS:
!   NONE
!
!--
    BEGIN

    BIND
        req_block = .jobstatus[.job_handle, DIUJ$A_REQ_BLOCK] : $DIU_BLOCK;

    LOCAL
        dependent;
    !
    ! If the job completed normally, delete it from the queue.
    !
    IF .jobstatus[.job_handle, DIUJ$V_REQ_COMPLETED]
    THEN
        BEGIN
        !
        ! Notify the user of job disposition and do resource accounting
        !
        notify (.jobstatus[.job_handle, DIUJ$G_LAST_ERROR],
                .jobstatus[.job_handle, DIUJ$G_2ND_CODE],
                jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT],
                req_block);
        a$account (.job_handle, 'SUC');
        !
        ! If dependent request exists, clear its prerequisite field
        !
        IF (dependent = .req_block[DIU$H_DEPENDENT_ID]) NEQ 0
        THEN q$modify (.dependent, DIUQ$K_PREREQUISITE_ID, 0);
        ! Delete this completed request from the queue
        q$delete (.req_block[DIU$H_REQUEST_ID]);
        END
    ELSE
        BEGIN
        IF .jobstatus[.job_handle, DIUJ$V_FLUSH_REQUEST]
        THEN
            BEGIN
            !
            ! Notify the user of job disposition if hasn't already been done.
            !
            IF NOT .jobstatus[.job_handle, DIUJ$V_ALREADY_NOTIFIED]
            THEN
                BEGIN
                !
                ! Notify the user of job disposition
                !
                notify (.jobstatus[.job_handle, DIUJ$G_LAST_ERROR],
                        .jobstatus[.job_handle, DIUJ$G_2ND_CODE],
                        jobstatus[.job_handle, DIUJ$T_EXTRA_TEXT],
                        req_block);
                END;
            !
            ! Do resource accounting
            !
            a$account (.job_handle, 'ERR');
            !
            ! If dependent request(s) exist, dispose of them also
            !
            IF (dependent = .req_block[DIU$H_DEPENDENT_ID]) NEQ 0
            THEN
                abort (.dependent);
            IF NOT .jobstatus[.job_handle, DIUJ$V_ALREADY_DELETED]
            THEN
                q$delete (.req_block[DIU$H_REQUEST_ID]);
            END
        ELSE
            BEGIN
            !
            ! Do resource accounting and requeue the request
            !
            a$account (.job_handle, 'REQ');
            q$reque (.req_block[DIU$H_REQUEST_ID]);
            lj$event(DIU$_REQUEUED, 0, 0, .job_handle);         ! System log
            lj$uevent(DIU$_REQUEUED, 0, 0, .job_handle);        ! User log file
            END
        END;
    END;                                ! End of dispose
GLOBAL ROUTINE abort (req_ID) : NOVALUE =
!++
! FUNCTIONAL DESCRIPTION:
!   Abort a chain of dependent requests, unless continuation requested.
!   We go down the chain deleting requests until the end of the chain
!   is reached, or a continuable dependent is encountered.
!
! FORMAL PARAMETERS:
!   req_ID      - request-ID of the first dependent in the chain
!
! IMPLICIT INPUTS:
!   NONE
!
! IMPLICIT OUTPUTS:
!   NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
!   NONE
!
! SIDE EFFECTS:
!   NONE
!
!--
    BEGIN

    LOCAL
        chain_head,
        req_block_template : $DIU_BLOCK,
	req_block : REF $DIU_BLOCK,
        bits,
        jobname_descr : $STR_DESCRIPTOR ();

    chain_head = 0;
    DO
        BEGIN
        IF .chain_head NEQ 0
        THEN
            q$release_chain (.chain_head);
        q$req_block_init (req_block_template);
        req_block_template[DIU$H_REQUEST_ID] = .req_ID;
        IF NOT q$find (req_block_template, chain_head)
        THEN
            EXITLOOP;
        IF .chain_head EQL 0
        THEN
            EXITLOOP;
        req_block = .chain_head + 1;
        $STR_DESC_INIT (DESCRIPTOR = jobname_descr,
                        STRING = (.req_block[DIU$H_JOBNAME],
                                  CH$PTR (req_block[DIU$T_JOBNAME])));
        IF .req_block[DIU$V_SEQ_CONTINUE]
        THEN
            BEGIN
            !
            ! This request is continuable.  Remove the dependency and quit:
            ! we stop aborting at the first sign of willingness to continue.
            !
            q$modify (.req_ID, DIUQ$K_PREREQUISITE_ID, 0);
            EXITLOOP;
            END;
        !
        ! This request must be aborted.  Get the next dependent's ID and
        ! delete this request, after notifying the user.
        !
        $DIU_LOG (($STR_CONCAT ('Req ',
                                $STR_ASCII (.req_block[DIU$H_REQUEST_ID]),
                                ' (',
                                (.req_block[DIU$H_JOBNAME],
                                 CH$PTR (req_block[DIU$T_JOBNAME])),
                                ') killed, prerequisite request aborted')));
        req_ID = .req_block[DIU$H_DEPENDENT_ID];
        notify (DIU$_DEPENDENT_ABORTED,
                0,
                (UPLIT (0, 0)),
                .req_block);
        q$delete (.req_block[DIU$H_REQUEST_ID]);
        END
    UNTIL
        .req_ID EQL 0;                  ! Means end of dependency chain
    q$release_chain (.chain_head);      ! In case anything still there
    END;                                ! End of abort
END                                     ! End of module
ELUDOM