Google
 

Trailing-Edge - PDP-10 Archives - tops10_tools_bb-fp64a-sb - 10,7/fedel/fedel.mac
There are 5 other files named fedel.mac in the archive. Click here to see a list.
	TITLE	FEDEL -- Delete tracks of front-end file system
	SUBTTL	G.M. Uhler/GMU  17-Jul-80

;This program zeroes the words in both HOM blocks of a disk containing
;information about the RSX20F front-end file system and then zeroes
;every 400 blocks on the pack starting at block 0 to destroy the
;front-end HOM block.  This action removes all tracks that a front-end
;file system ever existed on the pack and allows a new one to be built.


;Copyright (C) 1980,1981,1982,1983 by
;Digital Equipment Corporation, Maynard, Mass.
;
;
;This software is furnished under a license and may be used and copied
;only  in  accordance  with  the  terms  of  such license and with the
;inclusion of the above copyright notice.  This software or any  other
;copies thereof may not be provided or otherwise made available to any
;other person.  No title to and ownership of the  software  is  hereby
;transferred.
;
;The information in this software is subject to change without  notice
;and  should  not  be  construed  as a commitment by Digital Equipment
;Corporation.
;
;Digital assumes no responsibility for the use or reliability  of  its
;software on equipment which is not supplied by Digital.


	SEARCH	JOBDAT,MACTEN,UUOSYM
	SALL


	FDLVER==1		;Major version number
	FDLMIN==0		;Minor version number
	FDLEDT==6		;Edit number
	FDLWHO==0		;Who last edited


	TWOSEG
	RELOC	400000
	LOC	.JBVER
	VRSN.	(FDL)
	RELOC
;AC Definitions

	T1==1			;First of 4 temporaries
	T2==2
	T3==3
	T4==4
	P1==5			;First of 4 preserved
	P2==6
	P3==7
	P4==10
	P==17			;PDL pointer

;Miscelaneous definitions

	PDLLEN==10		;Length of PDL
	BLKINC==400		;Stomp every this many blocks on the disk
	BLKSIZ==200		;Size of a disk block
	DSK==1			;Disk channel
	DEL==2			;Channel to delete FE.SYS
	HOM1==1			;Block address of first HOM block
	HOM2==12		;Block address of second HOM block
	HOMHID==1		;Unit ID in HOM block
	HOMFEB==61		;HOM block offset of pointer to FE
	HOMFEL==62		;HOM block offset of length of FE
	RIBSTS==17		;RIB offset of status bits
	RIPNDL==1B19		;No delete bit in RIB
	RIBSLF==177		;RIB offset of RIB block number
	EO.ERR==1		;Error message
	EO.WRN==2		;Warning message
	EO.STP==4		;Stop program on this error
	EO.NCR==10		;No CRLF at the end of this error


	DEFINE	ERROR(MSG,OPT,LABEL),<
	  PUSHJ	P,ERRMSG
	  XLIST
	  ..OPT==EO.ERR		;Initialize type
	  IRP OPT,<
	    IFIDN <OPT>,<STOP>,<..OPT==..OPT!EO.STP>
	    IFIDN <OPT>,<NOCRLF>,<..OPT==..OPT!EO.NCR>
	  >
	  IFB <LABEL>,<
	    CAI	..OPT,[ASCIZ/?'MSG/]
	  >
	  IFNB <LABEL>,<
	    CAIA ..OPT,[ASCIZ/?'MSG/]
	    JRST LABEL
	  >
	  LIST
	>


	DEFINE	WARN(MSG,OPT,LABEL),<
	  PUSHJ	P,ERRMSG
	  XLIST
	  ..OPT==EO.WRN		;Initialize type
	  IRP OPT,<
	    IFIDN <OPT>,<STOP>,<..OPT==..OPT!EO.STP>
	    IFIDN <OPT>,<NOCRLF>,<..OPT==..OPT!EO.NCR>
	  >
	  IFB <LABEL>,<
	    CAI	..OPT,[ASCIZ/%'MSG/]
	  >
	  IFNB <LABEL>,<
	    CAIA ..OPT,[ASCIZ/%'MSG/]
	    JRST LABEL
	  >
	  LIST
	>
FEDEL:	JFCL			;Ignore CCL entry
	RESET			;Stop the world
	GETPPN	T1,		;GET OUR PPN
	  JFCL			;AVOID STUPID SKIP
	CAME	T1,[1,,2]	;Privileged?
	  ERROR	<Job not privileged, must be run as [1,2]>,STOP
	OUTSTR	[ASCIZ/
***********************************************************************
* This program deletes all traces of an RSX20F front-end file system. *
*      In doing so, it destroys the ENTIRE contents of the pack.      *
*         DO NOT CONTINUE if this is not what you want to do.         *
***********************************************************************

/]
	MOVE	P,[IOWD PDLLEN,PDL] ;Setup PDL
	OUTSTR	[ASCIZ/
Physical unit name: /]
	PUSHJ	P,GETNAM	;Get name of unit, return in P1
	  JRST	NOTPHY		;Give error message
	MOVEM	P1,DSCBLK+.DCNAM ;Store name in DSKCHR block
	MOVE	P2,[.DCUSZ+1,,DSCBLK] ;Point at the block
	DSKCHR	P2,		;See what the monitor thinks
	  JRST	NOTPHY		;It doesn't
	LDB	T2,[POINTR P2,DC.TYP] ;Get type of unit
	CAXE	T2,.DCTPU	;Must be physical unit
NOTPHY:	  ERROR	<Not a physical unit>,STOP
	LDB	T1,[POINTR P2,DC.CNT] ;Get type of controller
	LDB	T2,[POINTR P2,DC.UNT] ;Get type of drive
	CAXN	T1,.DCCRP	;RH10/RH20?
	CAXLE	T2,.DCUR6	;Yes, RP04 or RP06?
	  ERROR	<Not an RP04 or RP06>,STOP
	OUTSTR	[ASCIZ/
You have specified unit /]
	MOVE	T2,P1		;Get unit name
	PUSHJ	P,PRTNAM	;Print it
	SKIPN	T2,DSCBLK+.DCSNM ;Get STR name if any
	  JRST	FEDEL1		;None, skip it
	OUTSTR	[ASCIZ/
Structure ID for the pack mounted on this unit is /]
	PUSHJ	P,PRTNAM	;PRINT STR NAME
FEDEL1:	MOVX	T1,UU.PHS!.IODMP ;Need a physical device in dump mode
	MOVE	T2,P1		;Get device name
	MOVX	T3,0		;No buffers in dump mode
	OPEN	DSK,T1		;OPEN the channel
	  ERROR	<Can't OPEN specified unit>,STOP
	MOVX	T1,HOM1		;Point at first HOM block
	PUSHJ	P,REDBLK	;Read it
	  ERROR	<Read error on first HOM block>,NOCRLF,IOEPRT
	MOVE	T2,BUF+HOMHID	;Get unit ID from HOM block
	OUTSTR	[ASCIZ/
HOM block unit ID for this unit is /]
	PUSHJ	P,PRTNAM	;Print it
	OUTSTR	[ASCIZ/
Continuing will destroy the ENTIRE contents of this pack.
Do you wish to continue? /]
	PUSHJ	P,YESNO		;Ask for YES or NO
	  JRST	FEDEL3		;No
	PUSHJ	P,DELFIL	;Delete FE.SYS
	  WARN	<Delete of FE.SYS failed>
	SETZM	BUF+HOMFEB	;Clear pointer to FE
	SETZM	BUF+HOMFEL	;Plus length
	MOVX	T1,HOM1		;Get back address
	PUSHJ	P,WRTBLK	;Write it back
	  ERROR	<Write error on first HOM block>,NOCRLF,IOEPRT
	MOVX	T1,HOM2		;Point at second HOM block
	PUSHJ	P,REDBLK	;Read it
	  ERROR	<Read error on second HOM block>,NOCRLF,IOEPRT
	SETZM	BUF+HOMFEB	;Clear pointer to FE
	SETZM	BUF+HOMFEL	;Plus length
	MOVX	T1,HOM2		;Get back address
	PUSHJ	P,WRTBLK	;Write it back
	  ERROR	<Write error on second HOM block>,NOCRLF,IOEPRT
	SETZM	BUF		;Clear first word of buffer
	MOVE	T1,[BUF,,BUF+1] ;Setup BLT pointer
	BLT	T1,BUF+177	;Clear entire buffer
	MOVX	P3,0		;Init block pointer
FEDEL2:	MOVE	T1,P3		;Transfer block address
	CAML	T1,DSCBLK+.DCUSZ ;Still on unit?
	  JRST	FEDEL3		;No, quit
	PUSHJ	P,WRTBLK	;Write zeros into that block
	  ERROR	<Write error zeroing block>,NOCRLF,IOEPRT
	ADDI	P3,BLKINC	;Bump to next block to zero
	JRST	FEDEL2		;  and loop

FEDEL3:	RELEAS	DSK,		;Release channel
	MONRT.			;Exit quietly
	JRST	FEDEL		;Loop if CONT
;Routine to process the ERROR and WARN macros.
;Return+2 always unless EO.STP is set

ERRMSG:	OUTSTR	CRLF		;Start on a new line
	MOVE	T1,@0(P)	;Get CAI word
	OUTSTR	(T1)		;Put out the message
	TXNN	T1,<<EO.NCR>B12> ;No CRLF wanted?
	  OUTSTR CRLF		;No, add one
	TXNN	T1,<<EO.STP>B12> ;Stop on this error?
	  JRST	CPOPJ1		;No, return
	JRST	KILL		;Stop the program


;Here on I/O errors from the disk to print the block number and
;status and give up

IOEPRT:	OUTSTR	[ASCIZ/, block = /]
	MOVE	T1,LSTBLK	;Get block number
	PUSHJ	P,PRTOCT	;Print it
	OUTSTR	[ASCIZ/, status = /]
	MOVE	T1,ERRSTS	;Get status
	PUSHJ	P,PRTOCT	;Print it
	OUTSTR	CRLF
KILL:	RESET			;Insure all is stopped
	EXIT			;  and give up
;Routine to delete FE.SYS from the pack selected in the startup
;dialog.  Call with:
;	P1/Device name
;Return+1 if couldn't delete the file
;Return+2 if file was deleted

DELFIL:	MOVX	T1,UU.PHS!.IODMP ;Physical device in dump mode
	MOVE	T2,P1		;Get device name
	MOVX	T3,0		;No buffers
	OPEN	DEL,T1		;Open channel
	  POPJ	P,		;Failed
	MOVE	T4,[DELBLK,,T1] ;Setup to move LOOKUP block
	BLT	T4,T4		;Move it
	LOOKUP	DEL,T1		;LOOKUP FE.SYS
	  JRST	[TRNE  T2,-1	;File not found?
		 POPJ  P,	;No, give non-skip return
		 JRST  CPOPJ1]	;Yes, give skip return
	USETI	DEL,0		;Set to read RIB
	STATZ	DEL,IO.ERR	;Any errors?
	  POPJ	P,		;Yes, return
	INPUT	DEL,DSKIOW	;Read the RIB of the file
	STATZ	DEL,IO.ERR	;Any errors?
	  POPJ	P,		;Yes, return
	MOVEI	T1,DEL		;Get the channel
	MOVEM	T1,DSCBLK+.DCNAM ;Store for DSKCHR
	MOVE	T1,[.DCUPN+1,,DSCBLK] ;Setup for DSKCHR
	DSKCHR	T1,		;Find out where the RIB is
	  POPJ	P,		;Failed
	CLOSE	DEL,CL.DAT	;Close and toss monitor core blocks
	MOVX	T1,UU.PHS!.IODMP ;Physical device in dump mode
	MOVE	T2,DSCBLK+.DCUPN ;Get physical unit name
	MOVEI	T3,0		;No buffers
	OPEN	DEL,T1		;Open the channel
	  POPJ	P,		;Failed
	MOVX	T1,RIPNDL	;Get no delete bit
	ANDCAM	T1,BUF+RIBSTS	;Clear it in RIBSTS
	USETO	DEL,BUF+RIBSLF	;Set to write block back
	STATZ	DEL,IO.ERR	;Errors?
	  POPJ	P,		;Yes, return
	OUTPUT	DEL,DSKIOW	;Rewrite RIB
	STATZ	DEL,IO.ERR	;Errors?
	  POPJ	P,		;Yes
	MOVE	T4,[DELBLK,,T1] ;Setup to move LOOKUP block
	BLT	T4,T4		;Move it
	LOOKUP	DEL,T1		;LOOKUP file again
	  POPJ	P,		;Failed
	SETZB	T1,T2		;Clear name and extension for delete
	RENAME	DEL,T1		;Delete it
	  POPJ	P,		;Failed
	CLOSE	DEL,		;Close the file
	RELEAS	DEL,		;Release channel
	JRST	CPOPJ1		;Give skip return
;Routine to read a command from the terminal.  Store the command
;in CMDBUF and a byte pointer in CMDB.
;Return+1 always

REDCMD:	MOVE	T2,[POINT 7,CMDBUF] ;Get pointer to buffer
	MOVEM	T2,CMDB		;Save for caller
	MOVX	T3,^D80		;Allow only 80 chars
REDCM1:	PUSHJ	P,GETCHR	;Get next character
	PUSHJ	P,CHKBRK	;Break?
	  SKIPA			;No
	JRST	REDCM2		;Yes, finish up
	SOJL	T3,REDCM1	;Loop if too many
	IDPB	T1,T2		;Store in buffer
	JRST	REDCM1		;  and loop
REDCM2:	MOVEI	T1,0		;Terminate buffer
	IDPB	T1,T2		;  with two
	IDPB	T1,T2		;  zeros
	POPJ	P,		;  and return


;Routine to read one character from the TTY.  Ignores nulls and
;carriage returns, maps lower to upper case.
;Return+1 always with
;	T1/Character

GETCHR:	INCHWL	T1		;Get character
	JUMPE	T1,GETCHR	;Loop if null
	CAXN	T1,.CHCRT	; or if CR
	  JRST	GETCHR		;...
	CAIL	T1,"a"		;Lower case character?
	 CAILE	T1,"z"		;...
	  POPJ	P,		;No, just return it
	SUBI	T1,"a"-"A"	;Fold to upper case
	POPJ	P,		;  and return


;Routine to check for break character. Call with:
;	T1/Character
;Return+1 if not a break character
;Return+2 if a break character

CHKBRK:	PUSH	P,T2		;Destroy no ACs
	MOVX	T2,1		;Get a bit to shift
	LSH	T2,(T1)		;Shift by value of character
	TDNE	T2,BRKTBL	;This a break character?
	  AOS	-1(P)		;Yes, bump return point
	POP	P,T2		;Restore T2
	POPJ	P,		;  and return

BRKTBL:	1_.CHBEL!1_.CHVTB!1_.CHFFD!1_.CHCNZ!1_.CHESC!1_.CHLFD
;Routine to print a SIXBIT name on the TTY.  Stops on the first
;space.  Call with:
;	T2/SIXBIT word
;Return+1 always

PRTNAM:	LSHC	T1,^D36		;Move to T1, clear T2
	LSHC	T1,-<5*6>	;Right justify char in T1
	JUMPE	T1,CPOPJ	;Return on first null
	MOVEI	T1,"0"-'0'(T1)	;Convert to ASCII
	OUTCHR	T1		;Output it
	PJRST	PRTNAM		;Loop for all chars


;Routine to get a SIXBIT name from the terminal.
;Return+1 if bad name typed
;Return+2 with SIXBIT name in P1

GETNAM:	PUSHJ	P,REDCMD	;Read in the command
	MOVX	P1,0		;Init name
	MOVE	T2,[POINT 6,P1]	;Build byte pointer to P1
GETNA1:	ILDB	T1,CMDB		;Get next character
	JUMPE	T1,CPOPJ1	;Return at end of line
	CAIN	T1,":"		;Specify a colon?
	  JRST	GETNA2		;Yes
	SUBI	T1,"A"-'A'	;Convert to SIXBIT
	TLNE	T2,770000	;Done more than 6?
	  IDPB	T1,T2		;Store in next slot in P1
	JRST	GETNA1		;Loop for more
GETNA2:	ILDB	T1,CMDB		;Get next char
	SKIPN	T1		;Must be a break here
CPOPJ1:	AOS	(P)		;Give skip return
CPOPJ:	POPJ	P,		;  and return
;Routine to check for a YES/NO response.
;Return+1 if no
;Return+2 if yes

YESNO:	PUSHJ	P,REDCMD	;Read in a line
	ILDB	T1,CMDB		;Get character
	CAIE	T1,"Y"		;Must be a YES
	 CAIN	T1,"N"		;  or a NO
	  JRST	YESNO1		;It is
	OUTSTR	[ASCIZ/
%Please respond with a Y or N: /]
	JRST	YESNO		;  and loop
YESNO1:	CAIN	T1,"Y"		;If a Y,
	  AOS	(P)		;  we must give a skip return
	POPJ	P,		;Return


;Standard routine to print an octal number.  Call with:
;	T1/Number
;Return+1 always

PRTOCT:	IDIVI	T1,^D8		;Divide by radix, remainder in T2
	HRLM	T2,0(P)		;Store remainder on stack
	SKIPE	T1		;Done yet?
	PUSHJ	P,PRTOCT	;No, do next digit
	HLRZ	T1,0(P)		;Get next digit back from stack
	ADDI	T1,"0"		;Convert to ASCII
	OUTCHR	T1		;Output it
	POPJ	P,		;Return to caller
;Routine to read a block from the disk into BUF.  Call with
;	T1/Block number to read
;Return+1 if errors detected
;Return+2 if no errors and block in BUF

REDBLK:	MOVEM	T1,LSTBLK	;Save for error messages
	USETI	DSK,T1		;Setup to read that block
	STATZ	DSK,IO.ERR	;Any errors?
	  JRST	IOERR		;Yes
	INPUT	DSK,DSKIOW	;Read the block
	STATO	DSK,IO.ERR	;Any errors?
	  JRST	CPOPJ1		;No, give skip
	JRST	IOERR		;Get status and return non-skip


;Routine to write a block from BUF to the disk.  Call with:
;	T1/Block number to write
;Return+1 if errors detected
;Return+2 if no errors and block written

WRTBLK:	MOVEM	T1,LSTBLK	;Save for messages
	USETO	DSK,T1		;Setup to write specified block
	STATZ	DSK,IO.ERR	;Any errors?
	  JRST	IOERR		;Yes
	OUTPUT	DSK,DSKIOW	;Do the output
	STATO	DSK,IO.ERR	;Any errors?
	  JRST	CPOPJ1		;No, give skip return
IOERR:	GETSTS	DSK,ERRSTS	;Get status for message
	POPJ	P,		;Give non-skip return
	RELOC
CMDB:	BLOCK	1		;Command buffer byte pointer
CMDBUF:	BLOCK	<^D80/5>+2	;Command buffer
LSTBLK:	BLOCK	1		;Last block read/written
ERRSTS:	BLOCK	1		;Status on last error
CRLF:	ASCIZ/
/
DELBLK:	SIXBIT/FE/		;LOOKUP block for FE.SYS
	SIXBIT/SYS/
	EXP	0
	XWD	1,4
PDL:	BLOCK	PDLLEN		;PDL
DSCBLK:	BLOCK	.DCUPN+1	;DSKCHR block
DSKIOW:	IOWD	BLKSIZ,BUF	;IOWD to BUF
	EXP	0
BUF:	BLOCK	BLKSIZ		;Buffer


	END	FEDEL