Google
 

Trailing-Edge - PDP-10 Archives - mit_emacs_170_teco_1220 - emacs/teach-emacs.txt
There is 1 other file named teach-emacs.txt in the archive. Click here to see a list.
This is the -*-Text-*- of the EMACS tutorial.

DOCOND declarations for operating-system dependencies.
{Alternatives:ITS,Twenex}
{Flag:?ITS}
{Flag:?Twenex}
{Char Replace:+ITS=>C-Z->C-C}
{Char Replace:+ITS=>C-M-Z->C-M-C}

{end}
You are looking at the EMACS tutorial.  Comments on this document
should be mailed to BUG-EMACS.

EMACS commands generally involve the CONTROL key (sometimes labelled
CTRL or CTL) or the META key (sometimes labelled EDIT).  Rather than
write out META or CONTROL each time we want you to prefix a character,
we'll use the following abbreviations:

 C-<chr>  means hold the CONTROL key while typing the character <chr>
	  Thus, C-F would be: hold the CONTROL key and type F.
 M-<chr>  means hold the META or EDIT key down while typing <chr>.
	  If there is no META or EDIT key, type <ALT>, release it,
	  then type the character <chr>.  "<ALT>" stands for the
	  key labelled "ALT" or "ESC".

Important note: if you must exit at some point, type C-X C-Z.
The characters ">>" at the left margin indicate directions for you to
try using a command.  For instance:
<<Blank lines inserted here by startup of TEACH-EMACS>>
>>  Now type C-V (View next screen) to move to the next screen.
	(go ahead, do it by depressing the control key and V together).
	From now on, you'll be expected to do this whenever you finish
	reading the screen.

Note that there is an overlap when going from screen to screen; this
provides some continuity when moving through the file.

The first thing that you need to know is how to move around from
place to place in the file.  You already know how to move forward a
screen, with C-V.  To move backwards a screen, type M-V (depress the
META key and type V, or type <ALT>V if you don't have a META or EDIT
key).

>>  Try typing M-V and then C-V to move back and forth a few times.


SUMMARY
-------

The following commands are useful for viewing screenfuls:

	C-V	Move forward one screenful
	M-V	Move backward one screenful
	C-L	Clear screen and redisplay everything
		 putting the text near the cursor at the center.

>> Find the cursor and remember what text is near it.
   Then type a C-L.
   Find the cursor again and see what text is near it now.


BASIC CURSOR CONTROL
--------------------

Getting from screenful to screenful is useful, but how do you
reposition yourself within a given screen to a specific place?
There are several ways you can do this.  One way (not the best, but
the most basic) is to use the commands previous, backward, forward
and next.  As you can imagine these commands (which are given to
EMACS as C-P, C-B, C-F, and C-N  respectively) move the cursor from
where it currently is to a new place in the given direction.  Here,
in a more graphical form are the commands:
 
			  Previous line, C-P
				  :
				  :
   Backward, C-B .... Current cursor position .... Forward, C-F
				  :
				  :
			  Next line, C-N

You'll probably find it easy to think of these by letter.  P for
previous, N for next, B for backward and F for forward.  These are
the basic cursor positioning commands and you'll be using them ALL
the time so it would be of great benefit if you learn them now.

>> Do a few C-N's to bring the cursor down to this line.

>> Move into the line with C-F's and then up with C-P's.
   See what C-P does when the cursor is in the middle of the line.

Lines are separated by a pair of characters, a Return and a Linefeed,
but EMACS almost always makes them look like one character.  You
can think of it as a Newline.

>> Try to C-B at the beginning of a line.  Do a few more C-B's.
   Then do C-F's back to the end of the line and beyond.

When you go off the top or bottom of the screen, the text beyond
the edge is shifted onto the screen so that your instructions can
be carried out while keeping the cursor on the screen.

>> Try to move the cursor off the bottom of the screen with C-N and
   see what happens.

If moving by characters is too slow, you can move by words.  M-F
(Meta-F) moves forward a word and M-B moves back a word.

>> Type a few M-F's and M-B's.  Intersperse them with C-F's and C-B's.

Notice the parallel between C-F and C-B on the one hand, and M-F and
M-B on the other hand.  Very often Meta characters are used for
operations related to English text whereas Control characters operate
on the basic textual units that are independent of what you are
editing (characters, lines, etc).  There is a similar parallel between
lines and sentences: C-A and C-E move to the beginning or end of a
line, and M-A and M-E move to the beginning or end of a sentence.

>> Try a couple of C-A's, and then a couple of C-E's.
   Try a couple of M-A's, and then a couple of M-E's.

See how repeated C-A's do nothing, but repeated M-A's keep moving
farther.  Do you think that this is right?

Two other simple cursor motion commands are M-< (Meta Less-than),
which moves to the beginning of the file, and M-> (Meta Greater-than),
which moves to the end of the file.  You probably don't need to try
them, since finding this spot again will be boring.  If you need the
shift key to type a "<", then you must also use the shift key to type
M-<.  Otherwise, you would be typing M-, .

The location of the cursor in the text is also called "point".  To
paraphrase, the cursor shows on the screen where point is located in
the text.

Here is a summary of simple moving operations including the word and
sentence moving commands:

	C-F	Move forward a character
	C-B	Move backward a character

	M-F	Move forward a word
	M-B	Move backward a word

	C-N	Move to next line
	C-P	Move to previous line

	C-A	Move to beginning of line
	C-E	Move to end of line

	M-A	Move back to beginning of sentence
	M-E	Move forward to end of sentence

	M-<	Go to beginning of file
	M->	Go to end of file

>> Try all of these commands now a few times for practice.
   Since the last two will take you away from this screen,
   you can come back here with M-V's and C-V's.  These are
   the most often used commands.

Like all other commands in EMACS, these commands can be given
arguments which cause them to be executed repeatedly.  The way you
give a command a repeat count is by typing C-U and then the digits
before you type the command.  If you have a META or EDIT key, you can
omit the C-U if you hold down the META or EDIT key while you type the
digits.  This is easier, but we recommend the C-U method because it
works on any terminal.

For instance, C-U 8 C-F moves forward eight characters.
	
>> Try giving a suitable argument to C-N or C-P to come as close
   as you can to this line in one jump.

The only apparent exception to this is the screen moving commands,
C-V and M-V.  When given an argument, they scroll the screen up or
down by that many lines, rather than screenfuls.  This proves to be
much more useful.

>> Try typing C-U 8 C-V now.

Did it scroll the screen up by 8 lines?  If you would like to
scroll it down you can give an argument to M-V.


WHEN EMACS IS HUNG
-----------------

If EMACS gets into an infinite (or simply very long) computation which
you don't want to finish, you can stop it safely by typing C-G.
You can also use C-G to discard a numeric argument or the beginning of
a command that you don't want to finish.

>> Type C-U 100 to make a numeric arg of 100, then type C-G.
   Now type C-F.  How many characters does it move?
   If you have typed an <ALT> by mistake, you can get rid of it
   with a C-G.

If you type <ALT> <ALT>, you get into something known as a
"minibuffer".  That is an advanced feature of EMACS.  We mention it
now only to say that you can get out of it with one or two C-G's if
you get into it by accident.


INSERTING AND DELETING
----------------------

If you want to type text, just do it.  Characters which you can see,
such as A, 7, *, etc. are taken by EMACS as text and inserted
immediately.  Type <Return> (the carriage-return key) to insert a line
separator.

You can delete the last character you typed by typing <Rubout>.
<Rubout> is a key on the keyboard, which might be labelled "Delete"
instead of "Rubout" on some terminals.  More generally, <Rubout>
deletes the character immediately before the current cursor position.

>> Do this now, type a few characters and then delete them
   by typing <Rubout> a few times.  Don't worry about this file
   being changed; you won't affect the master tutorial.  This is just
   a copy of it.

>> Now start typing text until you reach the right margin, and keep
   typing.  When a line of text gets too big for one line on the
   screen, the line of text is "continued" onto a second screen line.
   The exclamation mark at the right margin indicates a line which has
   been continued.
>> Use <Rubout>s to delete the text until the line fits on one screen
   line again.  The continuation line goes away.

>> Move the cursor to the beginning of a line and type <Rubout>.  This
   deletes the line separator before the line and merges the line onto
   the previous line.  The resulting line may be too long to fit, in
   which case it has a continuation line.
>> Type <Return> to insert the separator again.

Remember that most EMACS commands can be given a repeat count;  Note
that this includes characters which insert themselves.

>>  Try that now -- type C-U 8 * and see what happens.

You've now learned the most basic way of typing something in
EMACS and correcting errors.  You can delete by words or lines
as well.  Here is a summary of the delete operations:

	<Rubout>     delete the character just before the cursor
	C-D   	     delete the next character after the cursor

	M-<Rubout>   kill the word immediately before the cursor
	M-D	     kill the next word after the cursor

	C-K	     kill from the cursor position to end of line
	M-K	     kill to the end of the current sentence

Notice that <Rubout> and C-D vs M-<Rubout> and M-D extend the parallel
started by C-F and M-F (well, <Rubout> isn't really a control
character, but let's not worry about that).  C-K and M-K are like C-E
and M-E, sort of, in that lines are opposite sentences.

Now suppose you kill something, and then you decide that you want to
get it back?  Well, whenever you kill something bigger than a
character, EMACS saves it for you.  To yank it back, use C-Y.  Note
that you don't have to be in the same place to do C-Y; This is a good
way to move text around.  Also note that the difference between
"Killing" and "Deleting" something is that "Killed" things can be
yanked back, and "Deleted" things cannot.  Generally, the commands
that can destroy a lot of text save it, while the ones that attack
only one character, or nothing but blank lines and spaces, do not
save.

For instance, type C-N a couple times to position the cursor
at some line on this screen.

>> Do this now, move the cursor and kill that line with C-K.

Note that a single C-K kills the contents of the line, and a second
C-K kills the line itself, and make all the other lines move up.  If
you give C-K a repeat count, it kills that many lines AND their
contents.

The text that has just disappeared is saved so that you can
retrieve it.  To retrieve the last killed text and put it where
the cursor currently is, type C-Y.

>> Try it; type C-Y to yank the text back.

Think of C-Y as if you were yanking something back that someone
took away from you.  Notice that if you do several C-K's in a row
the text that is killed is all saved together so that one C-Y will
yank all of the lines.

>> Do this now, type C-K several times.

Now to retrieve that killed text:

>> Type C-Y.  Then move the cursor down a few lines and type C-Y
   again.  You now see how to copy some text.

What do you do if you have some text you want to yank back, and then
you kill something else?  C-Y would yank the more recent kill.  But
the previous text is not lost.  You can get back to it using the M-Y
command.  After you have done C-Y to get the most recent kill, typing
M-Y replaces that yanked text with the previous kill.  Typing M-Y
again and again brings in earlier and earlier kills.  When you
have reached the text you are looking for, you can just go away and
leave it there.  If you M-Y enough times, you come back to the
starting point (the most recent kill).

>> Kill a line, move around, kill another line.
   Then do C-Y to get back the second killed line.
   Then do M-Y and it will be replaced by the first killed line.
   Do more M-Y's and see what you get.  Keep doing them until
   the second kill line comes back, and then a few more.
   If you like, you can try giving M-Y positive and negative
   arguments.


FILES
-----

In order to make the text you edit permanent, you must put it in a
file.  Otherwise, it will go away when your invocation of EMACS goes
away.  You put your editing in a file by "visiting" the file.  What
visiting means is that you see the contents of the file in your EMACS;
and, loosely speaking, what you are editing is the file itself.
However, the changes still don't become permanent until you "save" the
file.  This is so you can have control to avoid leaving a half-changed
file around when you don't want to.  Even then, EMACS really makes a
new version of the file and doesn't change the old version at all (so
that you can verify or throw away your changes later if you like).

If you look near the bottom of the screen you will see a
line that starts with "EMACS  (Fundamental)  Main:" and continues with
the filename {+Twenex:DSK:<your
directory>TEACH-EMACS.TUTORIAL}{+ITS:your-directory; machine: TEACH
TEXT}.  This is the name of your own temporary copy of the
text of the EMACS tutorial; the file you are now visiting.  Whatever
file you visit, that file's name will appear in that precise
spot.{*Refill:}

The commands for visiting and saving files are unlike the other
commands you have learned in that they consist of two characters.
They both start with the character Control-X.  There is a whole series
of commands that start with Control-X; many of them have to do with
files, buffers, and related things, and all of them consist of
Control-X followed by some other character.

Another thing about the command for visiting a file is that you have
to say what file name you want.  We say the command "reads an argument
from the terminal" (in this case, the argument is the name of the
file).  After you type the command

	C-X C-V   Visit a file

EMACS will ask you for the file name.  You should end the name with
the Return key.  {+ITS:If you are using one of the USERS or GUEST
directories, you should make the first name of the file be your own
name, and use the second name to distinguish among your files.}  After
this command, you will see the contents of the file in your EMACS.
You can edit the contents.  When you wish to make the changes
permanent, issue the command{*Refill:}

	C-X C-S   Save the file

A new version of the file will be created.  When the operation is
finished, EMACS prints the name and version saved.  You should save
fairly often, so that you will not lose very much work if the system
should crash.

If you forget to save before visiting a different file, EMACS will
remind you that you made changes and ask you whether to save them.
(If you don't save them, they will be thrown away.  That might be what
you want!)  You should answer with a "Y" to save them or a "N" to
throw the changes away.

To make a new file, just visit it "as if" it already existed.  Then
start typing in the text.  When you ask to "save" the file, EMACS
will really create the file with the text that you have inserted.
From then on, you can consider yourself to be editing an already
existing file.

It is not easy for you to try out visiting a file and continue with
the tutorial.  But you can always come back into the tutorial by
starting it over and skipping forward.  So, when you feel ready, you
should try visiting a file named "FOO", putting some text in it, and
saving it; then exit from EMACS and look at the file to be sure that
it worked.


EXTENDING THE COMMAND SET
-------------------------

There are many, many more EMACS commands than could possibly be put
on all the control and meta characters.  EMACS gets around this with
the X (eXtend) command.  This comes in two flavors:

	C-X	Character eXtend.  Followed by one character.
	M-X	Named command eXtend.  Followed by a long name.

These are commands that are generally useful but used less than the
commands you have already learned about.  You have already seen two
of them: the file commands C-X C-V to Visit and C-X C-S to Save.
Another example is the command to tell EMACS that you'd
like to stop editing.  The command to do this is C-X C-Z.{+Twenex:  Think of
it as Z for zapping yourself.}

There are many C-X commands.  The ones you need immediately are:

	C-X C-V		Visit file.
	C-X C-S		Save file.
	C-X C-Z		Quit EMACS.  This does NOT save your file.  The
			standard way to save and exit is C-X C-S C-X C-Z.

Named eXtended commands are commands which are used even less
frequently, or commands which are used only in certain modes.  These
commands are usually called "functions".  An example is the function
Replace String, which globally replaces one string with another.  When
you type M-X, EMACS prompts you at the bottom of the screen with
M-X and you should type the name of the function you wish to call; in
this case, "Replace String".  Just type "REP<Alt>" and EMACS will
complete the name.  Then you type the string that you want to replace,
an <Alt>, the string you want to replace it with, and a return.
When the <Alt> is echoed, it looks like this: 

>> Move the cursor to the blank line two lines below this one.
   Then type M-X rep<Alt>changed<Alt>altered<Return>.

   Notice how this line has changed: you've replaced
   the word c-h-a-n-g-e-d with "altered" wherever it occurs
   after the cursor.


MODE LINE
---------

If EMACS sees that you are typing commands slowly it shows them to you
at the bottom of the screen in an area called the echo area.  The echo
area contains the bottom three lines of the screen.  The line
immediately above them is called the MODE LINE.  The mode line says
something like

   EMACS (Fundamental) Main: filename --nn%-- *

This is a very useful "information" line.

You already know what the filename means -- it is the file you have
visited.  What the --nn%-- means is that nn percent of the file is
above the top of the screen.  If the top of the file is on the screen,
it will say --TOP-- instead of --00%--.  If the bottom of the file is
on the screen, it will say --BOT--.  If you are looking at a file so
small it all fits on the screen, the --nn%-- will simply not be there.

The star means that you have made changes to the text.  Right after
you visit or save a file, there is no star.

The part of the mode line inside the parentheses is to tell you what
modes you are in.  The default mode is Fundamental which is what you
are in now.  It is an example of a "major mode".  There are several
major modes in EMACS for editing different languages and text, such as
LISP mode, Text mode, etc.  At any time one and only one major mode is
active, and its name can always be found in the mode line just where
"Fundamental" is now.  Each major mode makes a few commands behave
differently.  For example, there are commands for creating comments in
a program, and since each programming language has a different idea of
what a comment should look like, each major mode has to insert
comments differently.  Each major mode is the name of an extended
command, which is how you get into the mode.  For example,
M-X Fundamental Mode is how to get into Fundamental mode.

If you are going to be editing English text, such as this file, you
should probably use Text Mode.
>> Type M-X Text Mode<Return>.

Don't worry, none of the commands you have learned changes EMACS in
any great way.  But you can now observe that periods are no longer
part of words when you do M-F or M-B!  Major modes are usually like
that: commands don't change into completely unrelated things, but they
work a little bit differently.

Major modes are called major because there are also minor modes.
They are called minor because they aren't alternatives to the major
modes, just minor modifications of them.  Each minor mode can be
turned on or off by itself, regardless of what major mode you are in,
and regardless of the other minor modes.  So you can use no minor
modes, or one minor mode, or any combination of several minor modes.

One minor mode which is very useful, especially for editing English
text, is Auto Fill mode.  When this mode is on, EMACS breaks the line
in between words automatically whenever the line gets too long.  You
can turn this mode on by doing M-X Auto Fill Mode<Return>.  When the
mode is on, you can turn it off by doing M-X Auto Fill Mode<Return>.
If the mode is off, this function turns it on, and if the mode is on,
this function turns it off.  This is called "toggling".

>> Type M-X Auto Fill Mode<Return> now.  Then insert a line of "asdf "
   over again until you see it divide into two lines.  You must put in
   spaces between them because Auto Fill breaks lines only at spaces.
   Notice that "Fill" appears in the mode line in addition to the name
   of the major mode, not instead of it.

The margin is usually set at 70 characters, but you can change it
with the C-X F command.  You should give the margin setting you want
as a numeric argument.

>> Type C-X F with an argument of 20.  (C-U 2 0 C-X F).
   Then type in some text and see EMACS fill lines of 20
   characters with it.  Then set the margin back to 70 using
   C-X F again.


RECURSIVE EDITING LEVELS
------------------------

Sometimes you will get into what is called a "recursive editing
level".  This is a command which, as part of its job, wants you to
edit some text.  A good example is M-X Edit Options<Return>, which
shows you a list of many variables called options, and their values.
You can edit this list to change the values and thus turn the optional
features they control on or off.  When you are done, you can say "ok"
with the command C-M-Z.  If you do not have a META or EDIT key on your
terminal, type C-Z C-Z or <Alt>C-Z.  This is called "exiting" the
recursive editing level.  The text (the list of options) will
disappear and the changes you have made will be digested.

>> Type M-X Edit Options<Return> and see the list of options.
   Find the option "Auto Fill Mode" and edit the value to be 1.
   Now exit with C-Z C-Z and see that "Fill" is now present in the
   mode line, and auto-filling is in effect.
   Do M-X Edit Options<Return> again and set the value of the
   option to 0, and exit.  "Fill" will disappear from the mode line
   and auto-filling will no longer be in effect.

If you change your mind about the changes you have made inside the
recursive editing level, you can "abort" instead of "exit" by typing
the C-] command.  When you abort, the changes you have made will NOT
take effect.

>> Type M-X Edit Options<Return>.  Set the value of Auto Fill Mode to
   1 again, but instead of exiting, abort with C-].
   Say "Y" when it asks you whether you mean it.  You will see that
   "Fill" is not there in the mode line, because by aborting you said
   that your change to the value of the option should be ignored.
   Do M-X Edit options<Return> again.  You will see that the value of
   Auto Fill Mode is still 0.

You can't use C-G to get out of a recursive editing level because C-G
is used for discarding numeric arguments and partially typed commands
WITHIN the recursive editing level.


SEARCHING
---------

EMACS can do searches for strings (these are groups of contiguous
characters or words) either forward through the file or backward
through it.  To search for the string means that you are trying to
locate it somewhere in the file and have EMACS show you where the
occurrences of the string exist.  This type of search is somewhat
different from what you may be familiar with.  It is a search that is
performed as you type in the thing to search for.  The command to
initiate a search is C-S for forward search, and C-R for reverse
search.  BUT WAIT!  Don't do them now.  When you type C-S you'll
notice that the string "I-search" appears as a prompt in the echo
area.  This tells you that EMACS is in what is called an incremental
search waiting for you to type the thing that you want to search for.
<ALT> terminates a search.

>> Now type C-S to start a search.  SLOWLY, one letter at a time,
   type the word 'cursor', pausing after you type each
   character to notice what happens to the cursor.
>> Type C-S to find the next occurrence of "cursor".
>> Now type <Rubout> four times and see how the cursor moves.
>> Type <Alt> to terminate the search.

Did you see what happened?  EMACS, in an incremental search, tries to
go to the occurrence of the string that you've typed out so far.  To go
to the next occurrence of 'cursor' just type C-S again.  If no such
occurrence exists EMACS beeps and tells you that it is a failing
search.  C-G would also terminate the search.

If you are in the middle of an incremental search and type <Rubout>,
you'll notice that the last character in the search string is erased
and the search backs up to the last place of the search.  For
instance, suppose you currently have typed 'cu' and you see that your
cursor is at the first occurrence of 'cu'.  If you now type <Rubout>,
the 'u' on the search line is erased and you'll be repositioned in the
text to the occurrence of 'c' where the search took you before you
typed the 'u'.  This provides a useful means for backing up while you
are searching.

If you are in the middle of a search and happen to type a control
character (other than a C-S or C-R, which tell EMACS to search for the
next occurrence of the string), the search is terminated.

The C-S starts a search that looks for any occurrence of the search
string AFTER the current cursor position.  But what if you want to
search for something earlier in the text?  To do this, type C-R for
Reverse search.  Everything that applies to C-S applies to C-R except
that the direction of the search is reversed.


GETTING MORE HELP
-----------------

In this tutorial we have tried to supply just enough information to
get you started using EMACS.  There is so much available in EMACS that
it would be impossible to explain it all here.  However, you may want
to learn more about EMACS since it has numerous desirable features
that you don't know about yet.  EMACS has a great deal of internal
documentation.  All of these commands can be accessed through the HELP
character.  {+ITS:On a TV terminal, the word "HELP" should appear on
the H key.  Type the Help character by holding down TOP and typing H.}
If there is no key labelled "HELP" on your keyboard, you can type the
<HELP> character as {+ITS:C-_ H (two keystrokes, a Control-Underscore
and an H).}{+Twenex:C-M-?  (Control-Meta-Question Mark = C-Z ?), or
with the <HOLD> key, on Datamedia terminals.} Be warned: many
terminals are faulty and do not allow you to type the character C-_ in
the logical way (hold down Control and type an underscore).  For
example, on a VT-100 it works to hold down Control and type "/" or
"?"; on a hazeltine you have to type Control-Shift-O ! {*Refill:}

To use the HELP features, type the <HELP> character, and then a
character saying what kind of help you want.  If you are REALLY lost,
type <HELP> ? and EMACS will tell you what kinds of help it can give.
If you have typed the <HELP> character and decide you don't want any
help, just type C-G to abort.{*Refill:}

The most basic HELP feature is <HELP> C.  Type <HELP>, a C, and a
command character, and EMACS prints a description of the command.
When you are finished reading it, type a Space or a C-G (quit) to
bring your text back on the screen.

>> Type <HELP> C Control-P.  When you are finished reading the output,
type a Space.  The message should be something like

	The command Control-P runs the function ^R Up Real Line:
	Move up vertically to the next real line.
	Continuation lines are skipped.

The "name of the function" is important for people who are customizing
EMACS.  It is what appears in the EMACS CHART as the documentation for
the command character.  It often starts with the characters "^R".  For
now you can ignore it.

Multi-character commands such as C-X C-Z and (if you have no META or
EDIT key) <ALT>V are also allowed after <HELP> C.

Here are some other useful <HELP> options:

   <HELP> D	Describe a function.  You type in the name of the
		function.  To see your text again when it is done,
		type a Space or C-G.

>> Try typing <HELP> D Replace String<Return>.  Then type a Space
when you are finished reading it.

   <HELP> A	Apropos.  Type in a keyword and EMACS will list
		all the functions containing that keyword.  For some
		functions it will also list a one or two character
		command which has the same effect.

>> Type <HELP> A File<Return>.  You will see a list of all functions
(M-X commands) with "file" in their names.  You will also see commands
like C-X C-V and C-X C-S, listed under the corresponding function
names.  When it says "--More--" at the bottom of the screen, type
a Space to see the rest of the list.

   <HELP> I	Run the INFO program.  INFO contains the same
		information as in the EMACS manual, as well as
		documentation of some other system programs,
		organized by topic.  Here is where you can find
		out about, for instance, special commands for
		editing LISP code, handling buffers, replacing
		text, filling and justifying text, etc.

INFO is a fairly sophisticated documentation finder which is what you
will have to use to learn more about EMACS.  After you are familiar
with the material in this tutorial, you should try invoking INFO with
<HELP> I and then, as soon as you are in INFO, type H.  The H will get
you INFO's tutorial, which will teach you how to use INFO just as this
has taught you how to use EMACS.


CONCLUSION
----------

Remember, to exit use C-M-Z (C-Z C-Z).  You will not be screwed if you
exit with C-{+ITS:Z}{+Twenex:C} but various features will not be
provided, so it is probably wise to develop the habit of using
C-M-Z.{*Refill:}

This tutorial is meant to be understandable to all new users, so if
you found something unclear, don't sit and blame yourself - complain!