Enter your search terms Submit search form
	Web pdp-10.trailing-edge.com

DECSYSTEM10 DIAGNOSTIC MONITOR
MAINDEC-10-DDQDC

VERSION 0.15

APRIL 1980

VERSION 0.15 CORRECTS A PROBLEM WITH MARGINING ON A KI10 AND A PROBLEM
WITH SEARCHING ON DECTAPES.
---------------

VERSION 0.14

FEBRUARY 1978

VERSION 0.14 ADDS ECC CORRECTION TO THE RP04/RP05/RP06 DISK READ
ROUTINES.
---------------

VERSION 0.13

JULY 1977

VERSION 0.13 ADDED USER MODE SELECTION OF "D20MON" INSTEAD OF "DIAMON"
IF RUNNING UNDER "TOPS-20".

-------------------
VERSION 0.12

FEBRUARY 1977

VERSION 0.12 CORRECTS A PROBLEM WITH NOT CLEAR THE BUFFER USE BITS
WHEN LOADING IN USER MODE.
CORRECTS A PROBLEM WITH "FSELECT" OPERATIONS ON A KL10 WHEN RUNNING
CACHED AND WITH "FSELECT" AND RH CLEAR OPERATIONS RESETTING ALL DRIVES
CONNECTED TO A CONTROLLER AND PROBLEMS WITH THE USE OF 417 TO GET TO
THE RH20 CHANNEL AREA.
ALSO ADDS "KLAD" AS FIRST DEFAULT DISK TO SEARCH FOR WHEN SPECIFIC DISK
IS NOT SPECIFIED.
CHANGES USER MODE TTY INPUT TO LINE MODE AND CORRECTS PROBLEMS WITH
COMMAND LIST OPERATION WHEN DIAGNOSTICS USE THE "FSELECT" OPTION.
--------------------
VERSION 0.11

JUNE 1,1976

VERSION 0.11 ADDS SUPPORT OF PROGRAM LOADING FROM RP05 AND RP06
DISK PACKS.
-----------------
VERSION 0.10

FEBRUARY 26, 1976

VERSION 0.10 CHANGES COMMAND LIST INPUT FORMAT SO THAT
THE EXTENSION IS NO LONGER REQUIRED.  ALSO, SOME CODE WAS
MOVED FROM THE DIAMON.MAC FILE TO THE DEVLDR.MAC FILE TO ENABLE
THE MAGMON PROGRAM TO USE DIAMON.MAC AS A COMMON SOURCE.

CHANGES TO KL10 DTE20 SERVICE FOR MULTIPLE DTE20'S.
CORRECTS PROBLEM IN CMD LIST OPERATIONS FOR ".A10" FILES

REV 0.10 MAKES AN EVOLUTIONARY CHANGE FROM PREVIOUS VERSIONS BECAUSE
OF THE MULTIPLE DTE20 SUPPORT ON KL10'S AND TO TIE TOGETHER THE VERSIONS
OF ALL THE SUPPORT PROGRAMS "KLDCP,SUBRTN,KLDDT,DIAMON,MAGMON".

REV 0.10 ALSO DISASSOCIATES THE DEC VERSION NUMBER FROM THE
KL10 HARDWARE REVISION LEVEL.

REV 0.10 WILL OPERATE ON KL10'S AT REV 7, 7A, 8 AND HOPEFULLY ON ALL
FUTURE REVISIONS.

--------------
VERSION 2.4

JANUARY 6,1976

VERSION 2.4 PROVIDES LOAD DEVICE TYPE BACK TO "SUBRTN" FOR FSELECT
OPERATIONS. ALSO CHANGES USER LOAD CHANNEL TO 16.
--------------
VERSION 1.4

DECEMBER 17,1975

VERSION 1.4 CORRECTS PROBLEM WITH DEVICE COMMAND LIST PROCESS.
------------
VERSION 0.4

NOVEMBER 17,1975

VERSION 0.4 ADDS 8 BIT READ CAPABILITY FOR PROGRAMS USING "SUBRTN"
AND USER MODE LH SWITCH CONTROL FOR CHAIN MODE.
----------------------------
VERSION 0.3

OCTOBER 31,1975

PREVIOUS VERSIONS NOT ACCOUNTED FOR.

VERSION 0.3 CORRECTS PROBLEMS IN PREVIOUS VERSIONS AND ADDS
DEVICE HANDLING FOR PAPER TAPE, PDP-11 FORMAT DECTAPE, IMPROVED
TELETYPE OPERATIONS WITH THE INCLUSION OF CONTROL C, CONTROL D
AND CONTROL O CAPABILITY.

LINE PRINTER IMPROVED ALSO WITH OPERATOR ACTION REQUESTED IF
THE LINE PRINTER GOES OFF LINE.