Google
 

Trailing-Edge - PDP-10 Archives - k20v7b - dn20/dcpdlc.m11
There are 15 other files named dcpdlc.m11 in the archive. Click here to see a list.
	.TITLE	DCPDLC - DLC data base for DCP process
	.IDENT	/004160/
	.ENABL	LC
;
;
;                    COPYRIGHT (c) 1980, 1981, 1982
;                    DIGITAL EQUIPMENT CORPORATION
;
;     This software is furnished under a license and may  be  used
;     and copied only in accordance with the terms of such license
;     and with the inclusion of the above copyright notice.   This
;     software  or any other copies thereof may not be provided or
;     otherwise made available to any other person.  No  title  to
;     and ownership of the software is hereby transferred.
;
;     The information  in  this  software  is  subject  to  change
;     without  notice  and should not be construed as a commitment
;     by DIGITAL EQUIPMENT CORPORATION.
;
;     DIGITAL assumes no responsibility for the use or reliability
;     of  its  software  on  equipment  which  is  not supplied by
;     DIGITAL.
;
;+
;
;-
	.MCALL	DAT$

	DAT$	COR
	.WORD	0		; Timer byte and flags
	.BYTE	0		; protocol state
	.BYTE	0		; control messages to send
	.BYTE	0		; reported state
	.BYTE	0		; device control flags
	.BYTE	0		; requested protocol state
	.BYTE	0		; control flags
	.BYTE	0		; Protocol
	.BYTE	0		; Not controller loopback
	.BYTE	0		; Duplex
	.BYTE	0		; External clock
	.BYTE	0		; Network Management line state
;
; Threshold counters
;
	.ODD
	.BYTE	0		; Receiver threshold error counter
	.BYTE	0		; Transmit threshold error counter
	.BYTE	0		; Selection threshold error counter
;
; Data link counters
;
	.WORD	0,0		; Data bytes received
	.WORD	0,0		; Data bytes sent
	.WORD	0,0		; Data blocks received
	.WORD	0,0		; Data blocks sent
	.WORD	0		; Selection intervals elapsed
	.WORD	0		; Data errors outbound
	.WORD	0		; Data errors inbound
	.WORD	0		; Local buffer errors
	.WORD	0		; Remote buffer errors
	.WORD	0		; Selection timeouts
	.BYTE	0		; Local reply timeouts
	.BYTE	0		; Remote reply timeouts
;
; Station counters
;
	.WORD	0,0		; Time last zeroed
	.WORD	0		; Remote process errors
	.WORD	0		; Local process errors
	.BYTE	0		; Header block check errors
	.BYTE	0		; Maintenance data block check errors

	.BYTE	0		; No. of last message received
	.BYTE	0		; No. of last message queued to transmitter
	.BYTE	0		; No. of last message returned from transmitter
	.BYTE	0		; No. of highest message returned
				; from transmitter
	.BYTE	0		; No. of last acked transmitted message
	.BYTE	0		; No. of last acked message returned
	.BYTE	0		; Number of messages outstanding to the driver
	.BYTE	0		; NAK reason to be sent in NAK message
	.BYTE	0		; NMX PIX
	.BYTE	0		; KMC device priority
	.EVEN
	.WORD	0		; KMC CSR address
	.WORD	0		; KMC interrupt vector address
	.WORD	0		; DUP CSR address
	.WORD	3.		; SERVICE TIMER (default: 3 seconds)
	.WORD	3.		; RETRANSMIT TIMER (default: 3 seconds)
	LST$D			; Pretransmit queue
	LST$D			; Waiting for acknowledge queue
	.WORD	0		; Function pending list
	LIX$W			; Circuit logging entity identification
	.WORD	0		; Owner handle
	.WORD	0		; Transient error
	.WORD	0		; Persistent error
	.WORD	0		; Active buffers
	CHR$W	UNT,<3>		; CIRCUIT COST
	LIX$W			; Line logging entity identification
	LIX$W			; Driver process handle
        .BYTE	0		; Messages outstanding to the driver
        .BYTE	3.		; Maximum data messages pending at the driver.
	.EVEN

	LST$D			; Line pre-transmit queue
;	.WORD	0,0,0		; Header word area
	CHR$W	UNT,<1>		; (initialization)
	.WORD	0,0
	.BYTE	0		; Babbling count
	.BYTE	4.		; maximum transmits at one shot
	.EVEN
	END$	D.LEN

	.END