Google
 

Trailing-Edge - PDP-10 Archives - integ_tools_tops20_v7_30-apr-86_dumper - tools/sed2/sed1sw.mar
There are 5 other files named sed1sw.mar in the archive. Click here to see a list.
.TITLE	SED1SW - SED Switch Routines

.LIBRARY /SEDITB.MLB/
.ENABLE DEBUG
.DISABLE GLOBAL
.PSECT CODE,NOWRT,EXE,LONG

PRMDEF		;Define the SED parameters
FLGDEF		;  and the flag bits
TRMDEF		;  and the offsets in the terminal tables
SEQDEF		;  and the command sequence definitions

.SUBTITLE	Switch Command

;Here for the command to set a number of switches

SWITCH::CMPL	PARPTR,#PARBUF	;Did user type just enter switch?
	BNEQ	10$
	BRW	SWHSTS		;Yes - give him some status information
10$:	JSB	ERASPM		;Else erase parameter
	CLRB	@PARPTR		;End parameter with a null
	MOVAB	PARBUF,R2
	CVTBL	#-1,SAVEAC	;Don't let SWHMNX try to get a second line
	MOVL	R2,R3
	MOVZBL	(R3)+,R1	;Get first character
	CMPB	R1,#^A"/"	;Superfluous slash?
	BNEQ	20$
	MOVL	R3,R2		;Yes - skip it
20$:	BSBW	SWHMNY		;Handle the switch(s) in the parameter buffer
	JMP	DISCUR		;Re-position cursor and get new command

;Here on switch with no parameter: give file status

SWHNPM::BSBW	SWHBOT		;Set up the bottom line
	MOVAB	SWHNM1,R1
	JSB	PUTSTG
	BBS	#V_RDO,F,5$	;Is the file writable?  No
	BBC	#V_CHG,F,5$	;and has it been changed?  No
	MOVB	#^A"*",(R5)+	;Both - output the fact that it's changed
5$:	MOVAB	FILSPC,R1
	JSB	PUTSTF

	BSBW	MAKCPT		;Make a good character pointer
	MOVL	R7,R2		;Save real row pointer
	MOVAB	BUFFER,R6
	BSBW	FINDRW		;Count pages and lines from start of buffer
	MOVL	R2,R0
	MOVL	SAVEAC,R2
	MOVL	R7,SAVEAC
	MOVL	R0,R7

	TSTB	PAGFLG		;Want both pages and lines?
	BNEQ	10$		;Yes
	BRB	SWHNP1		;No - just lines
10$:	MOVAB	SWHNM2,R1
	JSB	PUTSTG
	ADDL3	#1,R3,R1	;Get page number
	JSB	PUTNUM		;Output page
	MOVB	#^A"-",(R5)+
	INCL	SAVEAC
	MOVL	SAVEAC,R1	;Get line number
	JSB	PUTNUM		;Output it
	BRB	SWHNP2		;Skip lines-only stuff

SWHNP1:	MOVAB	SWHNM3,R1
	JSB	PUTSTG
	ADDL3	#1,R2,R1	;Get line number
	JSB	PUTNUM		;Output it

SWHNP2:	MOVB	#^A"(",(R5)+
	SUBL3	#BUFFER-1,LINPTR,R1 ;Get offset of page into buffer
	MULL	#100,R1		;times 100
	SUBL3	#BUFFER,EN,R2	;divided by size of file
	DIVL	R2,R1
	JSB	PUTNUM		;Output percent through file

	MOVAB	SWHNM4,R1
	JSB	PUTSTG
	ADDL3	R8,SL,R1	;Output column + slide + 1
	INCL	R1
	JSB	PUTNUM
	TSTL	OLDSPC		;Got an alternate file?
	BEQL	SWHNPE		;No - don't talk about it
	MOVAB	SWHNM5,R1
	JSB	PUTSTG
	MOVAB	OLDSPC,R1
	JSB	PUTSTF
SWHNPE::MOVB	#^A" ",(R5)+
	SUBL3	#TYPBUF,R5,R1	;Compute length of message
	CMPL	R1,CPL.1	;Is it too long?
	BLEQ	10$		;No
	ADDL3	#TYPBUF,CPL.1,R5 ;Make message end at the right place
10$:	JSB	PUTTYP		;Output the text
	JSB	PROTOF		;Turn protection off
	BISL	#M_FBL,F	;Say bottom line has been fragged
	JMP	DISCUR		;Re-position the cursor and return

SWHNM1:	.ASCIZ	/FILE: /
SWHNM2:	.ASCIZ	/ PAGE: /
SWHNM3:	.ASCIZ	/ LINE: /
SWHNM4:	.ASCIZ	/%) POS: /
SWHNM5:	.ASCIZ	/ ALT: /

;Subroutine to set up the bottom of the screen for the switch command, etc.

SWHBOT::JSB	RESTPM		;Clean up the parameter entry
	JSB	CBOTOM		;Put message on bottom line
	JSB	PROTON		;Protected
	JMP	PUTTYP		;Output positioning now

;Here on token switch (enter, but no parameter): give nominal settings

SWHSTS:	BSBB	SWHBOT		;Set up the bottom line
	MOVAB	SWHS01,R1	;Output " RL:"
	JSB	PUTSTG
	MOVL	ROLLIN,R1	;Output number of lines to roll
	JSB	PUTNUM
	MOVAB	SWHS02,R1	;Output " RP:"
	JSB	PUTSTG
	MOVL	ROLPGS,R1	;Output number of pages to roll
	JSB	PUTNUM
	MOVAB	SWHS03,R1	;Output " PC:"
	JSB	PUTSTG
	MOVL	GOPERC,R1	;Output percent-goto nominal
	JSB	PUTNUM
	MOVAB	SWHS04,R1	;Output " SL:"
	JSB	PUTSTG
	MOVL	SLIDES,R1	;Output size of slide
	JSB	PUTNUM
	MOVAB	SWHS05,R1	;Output " IL:"
	JSB	PUTSTG
	MOVL	ADDLNS,R1	;Output number of lines to insert/delete
	JSB	PUTNUM
	MOVL	ADDLSP,R1	;Get number of spaces to go with the lines
	BEQL	SWHST1		;None - skip output
	MOVB	#^A",",(R5)+	;Output the comma
	JSB	PUTNUM		;Output the value
SWHST1:	MOVAB	SWHS06,R1	;Output " IS:"
	JSB	PUTSTG
	MOVL	ADDSPC,R1	;Output number of spaces to insert/delete
	JSB	PUTNUM
	MOVAB	SWHS07,R1	;Output " PK:"
	JSB	PUTSTG
	MOVL	PICKLN,R1	;Output number of lines to pick
	JSB	PUTNUM
	MOVL	PICKSP,R1	;Get spaces to go with those lines
	BEQL	SWHST2		;Any there?  No - so skip output
	MOVB	#^A",",(R5)+	;Yes - output the comma
	JSB	PUTNUM		;And the space count

SWHST2:	MOVAB	SWHS15,R1	;Output " CS:"
	JSB	PUTSTG
	MOVL	CASLNS,R1	;Changing the case of any lines?
	BEQL	SWHS2A		;No - skip output
	JSB	PUTNUM		;Yes - output them and a comma
	MOVB	#^A",",(R5)+
SWHS2A:	MOVL	CASSPS,R1	;Output number of chars to change case of
	JSB	PUTNUM

	MOVAB	SWHS16,R1	;Output " SU:"
	JSB	PUTSTG
	MOVL	SUBCNT,R1	;Output number of substitutes to do
	JSB	PUTNUM
	TSTL	ISVNUM		;Got an incremental save?
	BLEQ	SWHST3		;No
	MOVAB	SWHS08,R1	;Yes - output " ISV:"
	JSB	PUTSTG
	MOVL	ISVNUM,R1
	JSB	PUTNUM
SWHST3:	TSTL	SAVNUM		;Got an incremental typein save?
	BLEQ	SWHST4		;No
	MOVAB	SWHS09,R1	;Output " SV:"
	JSB	PUTSTG
	MOVL	SAVNUM,R1
	JSB	PUTNUM
SWHST4:	TSTL	LMARGN		;Got a changed left margin?
	BLEQ	SWHST5		;No
	MOVAB	SWHS10,R1	;Yes - output " LM:"
	JSB	PUTSTG
	MOVL	LMARGN,R1
	BSBW	PUTNPO
SWHST5:	CMPL	RMARGN,CPL.1	;Got a changed right margin?
	BEQL	SWHST6		;No
	MOVAB	SWHS11,R1	;Yes - output " RM:"
	JSB	PUTSTG
	MOVL	RMARGN,R1
	BSBW	PUTNPO
SWHST6:	MOVAB	SWHS12,R1	;Output " TB:"
	JSB	PUTSTG
	BBC	#V_WTB,F,10$	;Got word-wise tabs?
	MOVB	#^A"W",(R5)+	;Yes - call them size "W"
	BRB	SWHST7
10$:	BBC	#V_STB,F1,20$	;Got settable tabs?
	MOVB	#^A"S",(R5)+	;Yes - call them size "S"
	BRB	SWHST7
20$:	MOVL	TABLEN,R1	;No - output size of tab
	JSB	PUTNUM
SWHST7:	TSTL	SRCKEY		;Got a search key?
	BEQL	SWHST8		;No
	MOVAB	SWHS13,R1	;Output " KEY:"
	JSB	PUTSTG
	MOVAB	SRCKEY,R1
	JSB	PUTSTC
SWHST8:	TSTB	SUBSTG		;Got a substitute string?
	BEQL	10$		;No
	MOVAB	SWHS14,R1	;Yes - output " RPL:"
	JSB	PUTSTG
	MOVAB	SUBSTG,R1
	JSB	PUTSTC
10$:	BRW	SWHNPE		;Finish off

SWHS01:	.ASCIZ	/ RL:/
SWHS02:	.ASCIZ	/ RP:/
SWHS03:	.ASCIZ	/ PC:/
SWHS04:	.ASCIZ	/ SL:/
SWHS05:	.ASCIZ	/ IL:/
SWHS06:	.ASCIZ	/ IS:/
SWHS07:	.ASCIZ	/ PK:/
SWHS08:	.ASCIZ	/ ISV:/
SWHS09:	.ASCIZ	/ SV:/
SWHS10:	.ASCIZ	/ LM:/
SWHS11:	.ASCIZ	/ RM:/
SWHS12:	.ASCIZ	/ TB:/
SWHS13:	.ASCIZ	/ KEY:/
SWHS14:	.ASCIZ	/ RPL:/
SWHS15:	.ASCIZ	/ CS:/
SWHS16:	.ASCIZ	/ SU:/
.SUBTITLE	Switch Handling Subroutines

;Switch handling subroutines. There be:
;SWHMNY - handles a string of switches. R2 points to start of first one
;SWHONE - handles a single switch in PARBUF

;Many switches: transfer each to PARBUF; call SWHONE; loop
;Switches end with a return or a null
;Switches are nulled out of (R2) as they are transferred
;Call with R2 pointing after the "/" of the first switch

;For non-execute switches, ^anything is a real anything, and the up-arrow
;is ignored (useful for ^/ and ^^).

SWHMNY::MOVAB	PARBUF,R3
	MOVL	R3,PARPTR
	MOVZBL	(R2)+,R1	;Get first switch character
	CMPB	R1,#^A"X"	;Execute switch?
	BEQL	SWHMNX		;Yes - special case
	CMPB	R1,#^A"x"
	BEQL	SWHMNX		;Yes
	TSTB	R1
	BRB	SWHMN4

SWHMN0:	MOVZBL	(R2)+,R1	;Transfer switch to parameter buffer
SWHMN4:	BEQL	SWHMN1		;If null, handle last switch
	CLRB	-1(R2)		;Null out the source character
	CMPB	R1,#^A"^"	;Want to force the next character?
	BNEQ	10$		;No
	MOVZBL	(R2)+,R1	;Yes - get the character
	CLRB	-1(R2)		;Clear it out
	BRB	20$		;Go store it
10$:	CMPB	R1,#^A" "	;Ignore spaces
	BEQL	SWHMN0
	CMPB	R1,#^A"/"	;Start of another switch?
	BEQL	SWHMN1
	CMPB	R1,#^A"+"
	BEQL	SWHMN1		;Yes - process the switch
	CMPB	R1,#^O15	;End of line?
	BEQL	SWHMN1
20$:	MOVB	R1,(R3)+	;Else save character
	BRB	SWHMN0		;and get another

SWHMN1:	MOVQ	R1,SAVEAC+16	;Save latest character and switch pointer
	CLRB	(R3)+		;End with a null
	BSBW	SWHONE		;Process the switch
SWHMN2:	MOVQ	SAVEAC+16,R1	;Get character and pointer back
SWHMN3:	TSTL	R1		;If done, return
	BNEQ	10$
	RSB
10$:	CMPB	R1,#^O15	;At end of line?
	BEQL	SWHMNS
	BRB	SWHMNY		;No - look for another switch
SWHMNS:	MOVZBL	(R2)+,R1	;Skip rest of line
	BEQL	10$		;Return, if null
	CLRB	-1(R2)		;nulling along the way
	CMPB	R1,#^O12	;Until linefeed
	BNEQ	SWHMNS
10$:	RSB			;Done
;Here to handle the execute switch separately

SWHMNX:	MOVB	R1,(R3)+	;Save the "X"
	MOVZBL	(R2)+,R1	;Skip the colon after the "X"
	CMPB	R1,#^A":"	;  (if there is one)
	BEQL	20$
	TSTB	R1
	BRB	30$
10$:	MOVB	R1,(R3)+
20$:	MOVZBL	(R2)+,R1	;Save buffer name in parm buffer
30$:	BEQL	SWHMN3		;Null - ignore this bad format
	CMPB	R1,#^O15	;Start of another switch?
	BEQL	SWHMN3		;Yes - ignore this bad format
	CMPB	R1,#^A","	;Start of keystroke sequence?
	BEQL	40$		;Yes - set flag for it
	CMPB	R1,#^A":"	;Start of contents?
	BNEQ	10$		;No - keep going

	CLRL	R1		;Clear R1 - no keystroke coming
	BRB	50$
40$:	CVTBL	#-1,R1		;R1/-1 - keystroke coming
50$:	MOVL	R1,SAVEAC+12	;Save keystroke flag
	BISL	#M_FLG,F	;Set to get a return from XCT routines
	CLRB	(R3)+		;End parm buffer with a null
	MOVL	R2,SAVEAC+16	;Save pointer
	JSB	XCTSET		;Set up that buffer
	MOVL	SAVEAC+16,R2	;Restore pointer
	MOVAB	PARBUF+1,R3
	TSTL	SAVEAC+12	;Got a keystroke sequence?
	BEQL	SWHMX1		;No
	PUSHR	#^M<R3>
	BSBW	SWHMXK		;Yes - get keystroke, too
	POPR	#^M<R3>

SWHMX1:	MOVZBL	(R2)+,R1	;Move contents to parm buffer
	CMPB	R1,#^A"/"	;Start of a new switch?
	BNEQ	10$		;No
	BRW	SWHMX2		;Yes - go write the buffer
10$:	TSTB	R1		;Null?
	BEQL	15$		;Yes - treat like end of line
	CMPB	R1,#^O15	;End of line?
	BEQL	20$		;Yes - see if end of buffer
	MOVB	R1,(R3)+	;No - save character
	CMPB	R1,#^A"^"	;Special flag?
	BNEQ	SWHMX1		;No - continue
	MOVZBL	(R2)+,R1	;Yes - get next character
	CMPB	R1,#^A"/"	;Is it a real slash?
	BNEQ	10$		;No - just process normally
	MOVB	R1,-1(R3)	;Yes - save over the up-arrow
	BRB	SWHMX1		;  and then continue

15$:	MOVL	R2,R0		;Save the current pointer
	MOVL	SAVEAC+4,R2	;Get address of next line
	MOVL	SAVEAC,R1	;Get byte count of next line
	CMPW	#-1,R1		;If byte count = -1, end of file
	BEQL	30$
	CMPL	R2,END_INI	;or if at end of data, call it end of file
	BGEQ	30$
	CMPB	#9,2(R2)	;Is 1st char on next line a tab?
	BNEQ	30$		;No - call it end of line
	ADDL	R2,R1		;Compute address of next line
	ADDL	#2,R1
	BBC	#0,R1,18$	;At an odd address?
	INCL	R1		;Yes - step to the next one
18$:	MOVL	R1,SAVEAC+4	;Save it for next time
	MOVZWL	(R1),SAVEAC	;Also save the byte count
	CLRW	(R1)		;Make sure line ends with a null
	ADDL	#2,R2		;Go to the start of the line
	INCL	R2		;Step past the tab
	BRB	SWHMX1		;  and continue

20$:	MOVL	R2,R0		;Save the current pointer
	MOVZBL	(R2)+,R1	;Get the linefeed
	CMPB	R1,#^O12	;Is it really?
	BNEQ	30$
	MOVZBL	(R2)+,R1	;Yes - get first character of next line
	CMPB	R1,#9		;Is it a tab?
	BNEQ	30$
	BRW	SWHMX1		;Yes - ignore CRLF and tab and continue
30$:	MOVL	R0,R2		;No - end of this execute buffer
	MOVZBL	#^O15,R1	;Get CR and pointer to it back

SWHMX2:	MOVQ	R1,SAVEAC+16	;Save character and pointer
	CLRB	(R3)+
	BISL	#M_FLG,F	;Set flag to get a return
	JSB	XCTWRT		;Write the buffer
	BRW	SWHMN2		;Restore ACs and continue
SWHMXK:	MOVAQ	XCTKEY[R1],R4	;Get pointer to place to store sequence
	MOVL	R4,SAVEAC+20	;Save pointer for later
	TSTL	(R4)		;Any previous keystroke?
	BEQL	10$		;No
	PUSHR	#^M<R1,R2,R3,R4>
	MOVL	R1,R2		;Yes - point to it in the right register
	JSB	XCTKLK		;Restore the command in the table
	POPR	#^M<R1,R2,R3,R4>
10$:	BISL	#^X8000,R1	;Set execute command flag
	MOVL	R1,SAVEAC+24	;Save execute buffer index
	CLRL	R1		;Set up character counter
SWMXK1:	MOVZBL	(R2)+,R0	;Get character of sequence
	BNEQ	10$		;If null,
5$:	BRW	SWHMN3		;  ignore this bad format
10$:	CMPB	R0,#^A":"	;Start of contents?
	BEQL	SWMXK2		;Yes - see if command is legal
	CMPB	R0,#^O15	;Start of another switch?
	BEQL	5$		;Yes - bad format
	CMPB	R0,#^A"^"	;No - control character in sequence?
	BNEQ	30$
	MOVZBL	(R2)+,R0	;Yes - get character
	CMPB	R0,#^A"?"	;Rubout?
	BEQL	20$		;Yes
	BICB	#^C^X1F,R0	;No - make it a control character
	BRB	30$
20$:	MOVZBL	#^O177,R0	;Set up the rubout
30$:	CMPL	R1,#8		;Already stored enough characters?
	BGEQ	SWMXK1		;Yes
	MOVB	R0,(R4)+	;No - store it
	INCL	R1		;and count it
	BRB	SWMXK1

SWMXK2:	TSTL	STTFLG		;Initializing?
	BEQL	10$		;No
	RSB			;Yes - don't change table now
10$:	MOVL	SAVEAC+20,R6	;No - get pointer to sequence
				;Fall to change table and return

;Subroutine to change input table - set up or clear execute command
;Enter with execute index in SAVEAC+24, pointer to execute sequence in R6
;Index should have bit 15 set
;If index is -1, editor command is restored in table

;The format of the table is as follows:
;For the normal dispatch table:
;	Bit 15 is on if the command is an execute buffer
;	Bit 14 is on if the execute buffer contains more than one command
;	Bits 13-7 contain the formar (normal) editor command
;	Bits 6-0 contain the number of execute commands defined for this
;		command

SUBTBX::MOVZBL	(R6)+,R4	;Get the first character of the sequence
	CMPB	R4,#^O177	;Rubout?
	BNEQ	10$		;No
	CVTBL	#-1,R4		;Yes - use -1 as offset
10$:	MULL	#4,R4
	ADDL	ITB(R10),R4	;Get offset in terminal table
	MOVL	R4,R1		;Remember table address
	MOVL	(R4),R4		;Is it a normal command?
	BLSS	SUBTAS		;No - go look in subtable
	MOVZBL	(R6)+,R0	;Yes - get next command character
	MOVL	SAVEAC+24,R6	;Get execute index
	BLSS	SUBTX1		;If negative, go restore old command
	BBS	#15,R4,SUBTX0	;Was sequence already set up as an execute?
	TSTB	R0		;Is execute sequence 1 character long?
	BEQL	20$		;Yes
	MOVZWL	#^XC000,R6	;No - set flag for more input and zero counter
20$:	INSV	R4,#7,#7,R6	;Save original command character
	MOVL	R6,(R1)		;Save the execute call
	RSB			;Done

SUBTX0:	INCL	R4		;Bump the count of commands
	MOVL	R4,(R1)		;Save execute call with bumped counter
	RSB			;Done

SUBTX1:	BBC	#14,R4,SUTX1A	;Got at least two commands for this sequence?
	BITL	#^O77,R4
	BEQL	SUTX1A		;No
	DECL	R4		;Yes - just decrement count and save
	BRB	SUTX1B

SUTX1A:	BICL	#^XC000,R4	;Get original command back
	ASHL	#-7,R4,R4
SUTX1B:	MOVL	R4,(R1)		;Save it
	RSB			;Done

SUBTAS:	MOVZBL	(R6)+,R0	;Get next user-typed character
	MOVL	R4,TEMP		;Save subtable pointer
SUBTS1:	MOVZWL	TEMP,R4		;Compute address of subtable
	ADDL	R10,R4
	CVTWL	TEMP+2,R3	;Get the length of the subtable
SUBTS2:	MOVL	(R4),R1		;Get a subtable entry
	BNEQ	10$		;End of the table?
5$:	RSB			;Yes - command is not legal
10$:	TSTW	R1		;Match on any character?
	BEQL	SUBTS3		;Yes - set up real command now
	CMPB	R0,R1		;Do user's and table's chars match?
	BEQL	20$		;Yes
	ADDL	#4,R4		;Increment to next entry
	ADDL	#4,R3		;Also increment the count
	BLSS	SUBTS2		;Loop if not finished with table
20$:	TSTL	R3		;Not legal if end of table and not found
	BGTR	5$
SUBTS3:	MOVZWL	2(R4),R1
	CMPL	R1,#^O137	;Want another table?
	BGTR	SUBTSS		;Yes - go get it
SUBTS5:	MOVL	SAVEAC+24,R0	;Get execute index
	BLSS	SUBTS4		;If none, restore old command
	BBC	#15,R1,10$	;Was this already set up as an execute?
	INCL	R1		;Yes - bump counter and save
	BRB	SUBTSX
10$:	INSV	R1,#7,#7,R0	;Else save old command with execute index
	MOVW	R0,2(R4)
	RSB			;Done

SUBTSX:	BBS	#14,R1,SUTSX1	;More than one command already here?  Yes
	BISL	#^XC001,R1	;No - there is now (set flag, clear counter)
	BICL	#^X7E,R1
SUTSX1:	MOVW	R1,2(R4)	;Save it
	RSB			;Done

SUBTS4:	BBC	#14,R1,SUTS4A	;Got at least two commands for this sequence?
	BITL	#^O77,R1
	BEQL	SUTS4A
	DECL	R1		;Yes - decrement counter
	BRB	SUTS4B
SUTS4A:	ASHL	#-7,R1,R1	;Get original command back
	BICL	#^XFF80,R1
SUTS4B:	MOVW	R1,2(R4)	;Save it in the subtable
	RSB			;Done

SUBTSS:	BBS	#15,R1,SUBTS5	;Got an execute command?  Yes - set it up after all
	MOVW	R1,TEMP		;No - point to the new subtable
	MOVW	#-160,TEMP+2
	MOVZBL	(R6)+,R0	;Get nex tuser-typed character
	BRW	SUBTS1		;and pick up another character

;Subroutine to set up all execute buffer button sequences in the
;terminal input table.  This is done on startup in case the table was
;changed after SED.INI was processed, by the user's entry routine

SETXCB::MOVL	#XBFNUM-1,R9	;Loop through all execute buffers
STXCB1:	MOVQ	XCTKEY[R9],R3	;Does this buffer have a button?
	BEQL	STXCB2		;No - skip it
	ADDL3	#^X8000,R9,SAVEAC+24 ;Yes - set up execute index
	MOVAQ	XCTKEY[R9],R6	;  and pointer
	BSBW	SUBTBX		;Change table if command is legal
STXCB2:	SOBGEQ	R9,STXCB1	;Loop through all buffers
	RSB			;Then done
;Subroutine to parse and handle a single switch, which is in parameter buffer

SWHONE::MOVAB	PARBUF,R6
	CVTBL	#-1,R4		;Assume switch will be set
SWHON1:	BSBB	SWHLUR		;Get first character
SWHON2:	CMPB	R1,#^A"A"	;Is it alphabetic?
	BLSS	10$
	CMPB	R1,#^A"Z"
	BLEQ	20$
10$:	BRW	SWHERR		;No - error
20$:	MOVL	R1,R2		;Yes - save first character
	BSBB	SWHLUR		;Get second character
	SUBL	#^A"A",R2
	MOVL	SWHADR[R2],R2	;Get proper dispatch address
	JMP	(R2)		;Dispatch to switch routine

SWHNNN:	CLRL	R4		;Say "NO" has been typed
	CMPB	R1,#^A"O"	;Is 2nd character an "O"?
	BNEQ	SWHON2		;No - dispatch on it
	BRB	SWHON1		;Yes - ignore it

;Subroutine to read the next switch character.  Doesn't raise case
;and doesn't skip spaces and tabs.

SWHLRX:	MOVZBL	(R6)+,R1	;Get the next character
	BRB	SWHLR1		;Check the usual things and return

;Subroutine to read the next switch characters.  Converts lower to upper case

SWHLUR::MOVZBL	(R6)+,R1	;Routine to get next character
	CMPB	R1,#9		;Is it a tab?
	BEQL	SWHLUR		;Yes - ignore it
	CMPB	R1,#^A" "	;Is it a space?
	BEQL	SWHLUR		;Yes - ignore it
	CMPB	R1,#^A"a"	;Lower case?
	BLSS	SWHLR1		;No
	SUBB	#^O40,R1	;Yes - convert to upper
SWHLR1:	CMPB	R1,#^A"^"	;Want to force the next character?
	BNEQ	10$		;No
	MOVZBL	(R6)+,R1	;Yes - get it
10$:	RSB			;Return

;Routines to handle each switch
;2nd switch character is in R1, RSB when done

SWHAAA:	CMPB	R1,#^A"G"	;AGAIN switch?
	BNEQ	4$		;Yes - handle it
	BRW	SWHAGN
4$:	CMPB	R1,#^A"P"	;Append switch?
	BNEQ	7$		;Yes
	BRW	SWHAPP		;Yes
7$:	CMPB	R1,#^A"L"	;ALTERNATE file switch?
	BEQL	10$		;Yes
	BRW	SWAERR		;No - it's ambiguous
10$:	CMPL	R9,#$SETFI	;Doing a set-file command?
	BEQL	15$		;Yes - switch is illegal
	CMPL	R9,#$SWTCH	;  or doing a switch command?
	BNEQ	20$		;No
15$:	BRW	SALERR		;Yes - switch is illegal then
20$:	MOVL	#SPCSIZ-1,R1
30$:	MOVB	L^FILSPC(R1),R0	;Swap current and alternate filespecs
	MOVB	L^OLDSPC(R1),L^FILSPC(R1)
	MOVB	R0,L^OLDSPC(R1)
	SOBGEQ	R1,30$
	MOVL	FSPLEN,R0
	MOVL	OLDLEN,FSPLEN
	MOVL	R0,OLDLEN
	MOVL	OLDTYP,R1	;Swap file types
	MOVL	FSPTYP,OLDTYP
	MOVL	R1,FSPTYP
	MOVL	OLDTYP_SIZE,R1	;Swap number of characters in file types
	MOVL	FSPTYP_SIZE,OLDTYP_SIZE
	MOVL	R1,FSPTYP_SIZE
	BRB	SWHAN1

SWHAPP:	CLRL	APPFLG		;Assume don't want to append
	TSTL	R4		;Want to append?
	BEQL	10$		;No
	MOVAB	PIKBUF,APPFLG	;Yes - reset the append pointer
10$:	RSB

SWHAGN:	TSTB	CRRFLG		;Has the RCUR flag been given?
	BEQL	10$		;No
	BRW	SWMERR		;Yes - can't mix RCUR and AGAIN
10$:	MOVB	#-1,AGNFLG	;Set the AGAIN flag to set to same file twice
SWHAN1:	BSBW	SWHAG0		;Read argument, if any
	BLBS	R0,10$
	RSB			;No arg - just return
10$:	BRW	SWHPC1		;Argument - set up percent-goto

SWHUPP:	MOVB	R4,UPPFLG	;Save upper-lower case flag
	RSB

SWHCCC:	CMPB	R1,#^A"A"	;CASE switch?
	BEQL	SWHCAS		;Yes - handle it
	CMPB	R1,#^A"R"	;CREATE switch?
	BEQL	10$
	CMPB	R1,#^A"O"	;COMMENT switch?
	BEQL	SWHCOM		;Yes - handle it
	BRW	SWAERR		;No - it's ambiguous
10$:	MOVB	R4,CREFLG	;Yes - save CREATE flag
	RSB			;Done

SWHCAS:	TSTL	R4		;Make searches case-dependent?
	BGEQ	10$
	BICL	#M_NLC,F	;Yes
	RSB
10$:	BISL	#M_NLC,F	;No
	RSB

SWHCOM:	CLRL	TAGFLG		;Assume the user wants /NOCOMMENT
	TSTL	R4		;Does he?
	BEQL	20$		;Yes - done
	CLRL	TAGFLG+4
	CLRL	TAGFG1		;Else assume there's no ending comment char
	MOVAB	TAGFLG,R4	;Point to the buffer
	BSBW	SWHAGC		;Read the starting character(s)
	BLBC	R0,10$		;If no arg, use default
	TSTB	R1		;Any ending characters?
	BEQL	20$		;No
	MOVAB	TAGFG1,R4	;Yes - set up pointer to them
	BRW	SWHGC1

10$:	CVTBL	#-1,TAGFLG	;Set default ID strings
20$:	RSB			;Done

SWHSSS:	CMPB	R1,#^A"L"	;SLIDE switch?
	BEQL	SWHSLD		;Yes - handle it
	CMPB	R1,#^A"H"	;Show execute switch?
	BEQL	SWHSHW		;Yes - handle it
	CMPB	R1,#^A"C"	;SCROLL switch?
	BEQL	SWHSCR		;Yes
	CMPB	R1,#^A"A"	;SAVE switch?
	BNEQ	10$
	BRB	SWHSAV		;Yes - handle it
10$:	CMPB	R1,#^A"T"	;Strip line numbers switch?
	BEQL	20$
	BRW	SWAERR		;No - it's ambiguous
20$:	MOVB	R4,STRFLG	;Yes - save strip flag
	RSB

SWHSHW:	MOVB	R4,XSHFLG	;Save show flag
	RSB

SWHSLD:	TSTL	R4		;If /NOSLIDE disable sliding (ignore arg)
	BEQL	SWHSL2
	BSBW	SWHAG0		;Else see if there's an argument
	BLBC	R0,SWHSL2	;No - just enable sliding
	TSTL	R3		;Treat /SLIDE=0 like /NOSLIDE
	BLEQ	SWHSL1
	MOVL	R3,SLIDNM	;Set up the argument as the new nominal
	MOVL	R3,SLIDES	;  and current slide distances
	MOVL	#-1,R4		;Enable sliding and return
	BRB	SWHSL2
SWHSL1:	CLRL	R4		;Disable sliding
SWHSL2:	MOVL	R4,SLDFLG	;Save slide flag
	RSB

SWHSCR:	MOVB	R4,RLCFLG	;Save the scroll flag
	RSB			;Done

SWHSAV:	TSTL	R4
	BEQL	SWHSV1		;Jump if user said /NOSAVE
	BSBW	SWHAG0		;Else read argument
	BLBS	R0,10$
	BRW	SWGERR		;No arg - error
10$:	TSTL	R3		;Did user say /SAVE:0?
	BGTR	SWHSV2
SWHSV1:	CVTBL	#-1,R3		;Yes - use -1 (for no saves)
SWHSV2:	MOVL	R3,SAVNUM	;Else save # commands between saves
	MOVL	R3,SAVCNT	;Save as countdown value, too
	RSB

SWHBBB:	CMPB	R1,#^A"E"	;BEEP switch?
	BEQL	SWHBEP		;Yes - handle it
	CMPB	R1,#^A"A"	;BACKUP switch?
	BEQL	10$
	BRW	SWAERR		;No - it's ambiguous
10$:	MOVB	R4,BAKFLG	;Yes - save backup file flag
	RSB

SWHBEP:	TSTL	R4		;Set beep-on-insert-mode flag?
	BEQL	10$
	BISL	#M_BEP,F1	;Yes
	RSB
10$:	BICL	#M_BEP,F1	;No
	RSB

SWHRRR:	CMPB	R1,#^A"A"	;RAISE switch?
	BEQL	SWHRAI		;Yes - handle it
	CMPB	R1,#^A"E"	;Reset, read-only or recover switch?
	BNEQ	10$
	BRB	SWHRR1		;Yes - read another character
10$:	CMPB	R1,#^A"M"	;RMAR (right margin) switch?
	BEQL	SWHRMR		;Yes
	CMPB	R1,#^A"C"	;Replace-current-file switch?
	BEQL	SWHCUR		;Yes
	CMPB	R1,#^A"O"	;ROLL switch?
	BEQL	20$
	BRW	SWAERR		;No - it's ambiguous
20$:	TSTL	R4		;Roll if user types return on bottom line?
	BGEQ	30$
	BICL	#M_NRC,F	;No
	RSB
30$:	BISL	#M_NRC,F	;Yes
	RSB

SWHRAI:	MCOMB	R4,UPCFLG	;Save raise-case flag
	MOVB	#-1,INVFLG	;Don't toggle, use UPCFLG
	RSB

SWHCUR:	TSTB	AGNFLG		;Is the AGAIN flag set?
	BEQL	10$		;No
	BRW	SWMERR		;Yes - can't mix RCUR and AGAIN
10$:	MOVB	R4,CRRFLG	;Save replace-current-file switch
	RSB

SWHRMR:	BSBW	SWHAG0		;Read the RMAR (right margin) position
	BLBS	R0,10$
	BRW	SWGERR		;No arg - error
10$:	DECL	R3		;Make the value zero-origin
	CMPL	R3,LMARGN	;Is it to the right of the left margin?
	BGTR	20$
	BRW	SWGERR		;No - error
20$:	MOVL	R3,RMARGN	;Yes - save it
	RSB

SWHRR1:	BSBW	SWHLUR		;Get 3rd switch character
	CMPB	R1,#^A"A"	;REA == read-only?
	BNEQ	10$
	BRW	SWHRDO		;Yes
10$:	CMPB	R1,#^A"C"	;REC == recover journal?
	BEQL	SWHREC		;Yes
	CMPB	R1,#^A"S"	;RES == reset nominals?
	BEQL	20$
	BRW	SWAERR		;No - it's ambiguous
20$:	TSTL	R4		;Set reset-nominals flag?
	BEQL	30$
	BISL	#M_RST,F	;Yes
	JMP	RSTNOM		;Reset all nominals now and return
30$:	BICL	#M_RST,F	;No
	RSB

SWHREC:	MOVL	R4,JRNFLG	;Save recover-journal flag
	RSB

SWHJJJ:	CMPB	R1,#^A"P"	;Justify-prefix switch?
	BEQL	SWHJHD		;Yes - handle it
	CMPB	R1,#^A"O"	;Journal switch?
	BEQL	10$		;Yes
	BRW	SWAERR		;No - error or ambiguous
10$:	BICL	#M_JRW,F1	;Assume no journal
	TSTL	R4		;Want one after all?
	BGEQ	20$		;No
	BISL	#M_JRW,F1	;Yes
	CMPL	R9,#$SWTCH	;Switch command or set-up?
	BNEQ	20$
	JMP	JRNSTT		;Command - start the journal file now
20$:	RSB			;Switch - just return

SWHJHD:	TSTL	R4		;Jump to handle /NOJHEAD
	BEQL	SWJHDN
	MOVAB	JUSHED,R4	;Point to the justify header buffer
	BSBW	SWHAGA		;Read it
	BLBS	R0,10$		;Any argument?
	BRW	SWGERR		;No - error
10$:	MOVAB	JUSHED,R4
	CLRL	R3		;Find length and # characters in header
	CLRL	R2
SWJHD1:	MOVZBL	(R4)+,R1	;Get a character
	BEQL	SWJHD2		;Done if null
	CMPB	R1,#9		;Tab?
	BNEQ	10$		;No
	BISL	#7,R3		;Yes - move length to next tab stop
10$:	INCL	R3		;Count the character
	INCL	R2
	BRB	SWJHD1

SWJHDN:	CLRL	R3		;No header - clear the counts
	CLRL	R2
SWJHD2:	MOVL	R2,JSHCNT	;Save number of characters in string
	MOVL	R3,JSHCHR	;and the number of character positions needed
	RSB			;Done

SWHLLL:	CMPB	R1,#^A"M"	;LMAR switch?
	BNEQ	20$
	BRW	SWHLMR		;Yes - handle it
20$:	CMPB	R1,#^A"E"	;Length switch?
	BEQL	30$
	BRW	SWAERR		;No - it's ambiguous
30$:	BSBW	SWHAG0		;Yes - read argument
	BLBS	R0,40$
	BRW	SWGERR		;No arg - error
40$:	BBC	#V_WDW,F1,50$	;Got two windows on the screen?
	BRW	SWHERR		;Yes - error
50$:	TSTL	STTFLG		;Initializing?
	BEQL	SWHLPP		;No - set the length up now
	MOVW	R3,STTFLG+2	;Yes - save for later
	RSB			;Done for now

SWHLPP::MOVL	R3,LPP(R10)	;Save in terminal table
	MOVL	R3,R1
	CMPL	R1,LPP.0	;Using all the lines on the screen?
	BLSS	SETLP1		;No - put errors on bottom line
	BICL3	#^C<M_SLW!M_NEL>,SAVFLG,R2 ;Yes - restore saved SLO and NEL flags
	BICL2	#M_SLW!M_NEL,F1
	BISL2	R2,F1
	BRB	SETLPP		;Go finish off

SETLP1:	BISL	#M_SLW!M_NEL,F1	;Make errors go on bottom line
SETLPP::MOVL	R1,R3		;(Enter with R1/lines per page)
	DECL	R3
	DIVL3	#3,R1,LINROL	;Compute lines to roll
	MOVL	R3,LPP.1	;Save lines per page - 1
	MOVL	R3,LPP.2	;Save bottom line of screen
	BBC	#V_NEL,F1,10$	;If bottom is scratch, use next line up
	DECL	LPP.2
10$:	RSB

SWHLMR:	BSBW	SWHAG0		;Read new LMAR (left margin) position
	BLBS	R0,10$
	BRW	SWGERR		;No arg - error
10$:	SOBGEQ	R3,20$		;Make value zero-origin
	CLRL	R3		;But map zero into zero
20$:	CMPL	R3,RMARGN	;Is it to the left of the right margin?
	BLSS	30$
	TSTL	RMARGN		;Allow any /LM if no /RM yet
	BEQL	30$
	BRW	SWGERR		;No - error
30$:	MOVL	R3,LMARGN	;Yes - save it
	RSB

SWHOFL:	MOVAB	NEWSPC,R4
	BSBW	SWHAGA		;Read the new filespec into a temporary area
	TSTL	R0		;Any argument?
	BNEQ	10$		;Yes
	BRW	SWGERR		;No arg - error
10$:	MOVB	#-1,OUTFLG	;Say there will be a change of specs
	TSTL	R9		;Don't change now if initializing
	BNEQ	30$
20$:	RSB
30$:	CMPB	R9,#$SETFI	;O.K. to make the change now?
	BEQL	20$		;No - wait until end of set-file

;Subroutine to set up parse the filespecs given in the /OUT: switch

OUTSET::MOVB	#1,OUTFLG	;Note that spec is changing (by OUTFLG gt 0)
	MOVAB	NEWSPC,R4
	PUSHR	#^M<R2,R3,R4,R5>
	MOVC3	#100,FILSPC,SVASPC ;Save the current specs in case parse fails
	MOVC3	#100,NEWSPC,FILSPC ;Move in the new filespecs
	POPR	#^M<R2,R3,R4,R5>
	BSBW	PARSEF		;Parse the specs (error on failure)
	CLRB	OUTFLG		;Say spec change is no longer wanted
	MOVB	#-1,CHGSPC	;Say specs have changed
	BICL	#M_SMF,F	;This file and alternate can't be the same
	BBS	#V_RDO,F,10$	;Is file read-only?
	BISL	#M_CHG,F	;No - force the file to be saved
10$:	RSB			;Done

SWHWWW:	CMPB	R1,#^A"R"	;Write switch?
	BNEQ	10$
	BRB	SWHWRT		;Yes - handle it
10$:	CMPB	R1,#^A"I"	;Width switch?
	BEQL	20$
	BRW	SWAERR		;No - it's ambiguous
20$:	BSBW	SWHAG0		;Yes - read argument
	BLBS	R0,30$
	BRW	SWGERR		;No arg - error
30$:	TSTL	STTFLG		;Initializing?
	BEQL	SWHWID		;No - set the width up now
	MOVW	R3,STTFLG	;Yes - save for later
	RSB			;Done

SWHWID::MOVL	R3,CPL(R10)	;Save in terminal table
	DECL	R3		;Also save CPL - 1
	MOVL	R3,CPL.1
	CMPL	R3,RMARGN	;Need to move the right margin in?
	BGEQ	40$
	MOVL	R3,RMARGN	;Yes - do so
40$:	BITL	#M_WRP,SAVFLG	;Does terminal wrap around?
	BNEQ	50$
	RSB			;No - it still doesn't
50$:	CMPL	R3,CPL.0	;Yes - is new length shorter than screen?
	BLEQ	60$
	BISL	#M_WRP,F1	;No - make it wrap
	RSB
60$:	BICL	#M_WRP,F1	;Yes - no wrap
	RSB

SWHRDO:	MCOML	R4,R4		;Read-only - complement write flag
SWHWRT:	MCOML	R4,SAVEAC+36	;Stage the value in case command is set-file
	CMPL	R9,#$SETFI	;Is it set-file?
	BNEQ	SWHWR1		;No
	RSB			;Yes - don't set the flag now
SWHWR1:	TSTL	R4		;Set read-only flag?
	BEQL	10$
	BICL	#M_RDO,F	;No
	RSB
10$:	BISL	#M_RDO,F	;Yes
	RSB

SWHDDD:	CMPB	R1,#^A"E"	;/DELIM switch?
	BEQL	SWHDLM		;Yes - handle it
	CMPB	R1,#^A"T"	;Display tabs switch?
	BEQL	SWHTBB		;Yes
	BRW	SWAERR		;No - it's ambiguous

SWHTBB:	TSTL	R4		;Set display tabs flag?
	BEQL	10$
	BISL	#M_DTB,F	;Yes
	RSB
10$:	BICL	#M_DTB,F	;No
	RSB

SWHDLM:	TSTL	R4		;Was /NODELIM typed?
	BEQL	SWDLMX		;Yes
	MOVAB	DELIM,R4	;Point to the delimiter string
10$:	MOVZBL	(R6)+,R1	;Look for the colon:  get a character
	BEQL	SWDLMX		;If none treat same as /NODELIM
	CMPB	R1,#^A":"	;Else is it a colon?
	BEQL	20$		;Yes
	CMPB	R1,#^A"="	;  or an equal sign?
	BNEQ	10$		;No
20$:	MOVZBL	(R6)+,R1	;Get a character of the string
	CMPB	R1,#^A"^"	;Forcing the next character?
	BNEQ	30$		;No
	MOVZBL	(R6)+,R1	;Yes - force it
30$:	MOVB	R1,(R4)+	;Save it in the delimiter string
	BNEQ	20$		;and loop until a null is found
	RSB			;Done

SWDLMX:	CLRL	DELIM		;/NODELIM - clear delimiter string
	RSB			;Done

SWHHLP:	TSTL	R4		;Set no-help-wanted flag?
	BEQL	10$
	BICL	#M_NHP,F	;No
	RSB
10$:	BISL	#M_NHP,F	;Yes
	RSB

SWHIII:	CMPB	R1,#^A"M"	;Insert mode switch?
	BNEQ	10$
	BRB	SWHIMD		;Yes - handle it
10$:	CMPB	R1,#^A"C"	;Insert-cr-in-insert-mode switch?
	BNEQ	20$
	BRB	SWHICR		;Yes - handle it
20$:	CMPB	R1,#^A"D"	;Cheery message (File ID) switch?
	BNEQ	30$
	BRW	SWHID		;Yes - handle it
30$:	CMPB	R1,#^A"T"	;Insert Tabs switch?
	BNEQ	40$
	BRB	SWHINT		;Yes - handle it
40$:	CMPB	R1,#^A"S"	;Incremental save switch?
	BEQL	50$		;Yes - handle it
	CMPB	R1,#^A"N"	;Invert case switch?
	BEQL	SWHINV		;Yes - handle it
	BRW	SWAERR		;No - it's ambiguous
50$:	TSTL	R4		;Jump if user said /NOISAVE
	BEQL	SWHII1
	BSBW	SWHAG0		;Else read argument
	BLBS	R0,60$
	BRW	SWGERR		;No arg - error
60$:	TSTL	R3		;Did user say /ISAVE:0?
	BGTR	SWHII2		;No
SWHII1:	CVTBL	#-1,R3		;Yes - use -1 (for no saves)
SWHII2:	MOVL	R3,ISVNUM	;Else save # commands between ISAVES
	MOVL	R3,ISVCNT	;Save as countdown value, too
	RSB

SWHICR:	TSTL	R4		;Set no cr in insert mode flag?
	BEQL	10$
	BICL	#M_NCR,F	;No
	RSB
10$:	BISL	#M_NCR,F	;Yes
	RSB

SWHIMD:	TSTL	R4		;Set insert mode?
	BEQL	10$
	BISL	#M_IMD,F	;Yes
	RSB
10$:	BICL	#M_IMD,F	;No
	RSB

SWHINT:	MOVB	R4,INSTBS	;Save setting of insert-tabs switch
	RSB

SWHINV:	MCOMB	R4,INVFLG	;Save setting of invert-case switch
	RSB

SWHID:	MOVB	R4,IDFLG	;Save setting of ID switch
	RSB			;Done

SWHKKK:	MOVB	R4,KEYPAD	;Set /KEYPAD switch value
	TSTL	STTFLG		;Initializing?
	BEQL	20$		;No
10$:	RSB			;Yes - wait until later to make the change
20$:	MOVL	KPD(R10),R4	;Get address of the keypad manipulation routine
	BEQL	10$		;If it doesn't exist, just return
	JMP	(R4)		;If it does, call it and return

SWHMMM:	MOVB	R4,MSGFLG	;Save setting of message switch
	RSB

SWHTTT:	TSTL	R1		;Make "/T" default to /TABS
	BEQL	SWHTB0
	CMPB	R1,#^A":"	;Ditto
	BEQL	SWHTB0
	CMPB	R1,#^A"="	;Ditto
	BEQL	SWHTB0
	CMPB	R1,#^A"A"	;and /TA is /TABS, too
	BEQL	SWHTB0
	CMPB	R1,#^A"E"	;/TERMINAL?
	BNEQ	5$		;No
	BRW	SWHTRM		;Yes
5$:	CMPB	R1,#^A"R"	;/TRAIL switch?
	BNEQ	7$		;No
	MOVB	R4,TRLFLG	;Yes - save preserve-trailing-spaces flag
	RSB			;Done
7$:	CMPB	R1,#^A"S"	;Tab-set?
	BEQL	10$		;Yes
	BRW	SWAERR		;No - it's ambiguous
10$:	BSBW	SWHAG0		;Tab-set - read the decimal tab position
	BLBS	R0,20$
	BRW	SWHERR		;No arg - error
20$:	BBSS	#V_STB,F1,30$	;Insure automatic /T:s
	JSB	TABINI		;Preset /T:n tabs in TABTBL if needed
30$:	MOVL	R4,-(SP)	;Save the assertion
	DECL	R3		;Make column zero-based
	BGEQ	40$		;Was it already zero?
	BRW	SWGERR		;Yes - it's a bad value
40$:	CLRL	R4		;Prepare for EDIV
	EDIV	#32,R3,R3,R2	;Get word and position in word
	MOVL	(SP)+,R4	;Restore assertion
	MULL	#4,R3		;Convert offset to bytes
	INSV	R4,R2,#1,L^TABTBL(R3) ;Set or clear the bit
	RSB

SWHTB0:	TSTL	R4		;If notabs,
	BEQL	SWHTBW		;  set up wordwise tabs
SWHTAB:	CMPB	R1,#^A":"	;Else skip until the colon is found
	BEQL	SWHTA1		;Got it - proceed
	CMPB	R1,#^A"="	;Also accept an equals sign
	BEQL	SWHTA1
	MOVZBL	(R6)+,R1	;Get the next character
	BNEQ	SWHTAB		;Maybe this is the colon
	BRB	SWHTNW		;If no arg, set up normal tabs

SWHTA1:	MOVL	R6,R0		;Save pointer to start of argument
	BSBW	SWHLUR		;Get the 1st argument character
	CMPB	R1,#^A"W"	;Want wordwise tabs?
	BEQL	SWHTBW		;Yes - go set them
	CMPB	R1,#^A"S"	;Want settable tabs?
	BEQL	SWHTBS		;Yes - go set them
	MOVL	R0,R6		;No - point to the argument again
	BSBW	SWHAG1		;Read the rest of the numeric argument
	BLBC	R0,SWHTNW	;No arg - set up normal tabs
	MOVL	R3,TABLEN	;Save arg as length of a tab

SWHTNW:	JSB	TABINI		;Preset /T:n tabs in TABTBL (for ruler)
	BICL	#M_STB,F1	;Make sure settable tab flag is off
	BICL	#M_WTB,F	;Clear wordwise tab flag
	RSB

SWHTBW:	BISL	#M_WTB,F	;Set wordwise tab flag
	RSB			;Done

SWHTBS:	TSTL	R4		;Setting settable tabs?
	BEQL	SWHTS1		;No
	BICL	#M_WTB,F	;Yes - make sure ww tab flag is off
	BISL	#M_STB,F1	;Set settable tab flag
	RSB
SWHTS1:	BICL	#M_STB,F1	;Clear settable tab flag
	RSB			;Done

SWHGGG:	TSTL	R1		;Treat a lone "G" as GOTO
	BEQL	SWHPRC
	CMPB	R1,#^A"O"	;Want the GOTO switch?
	BEQL	SWHPRC		;Yes
	CMPB	R1,#^A":"	;  or got just "G:"?
	BEQL 	SWHPRC		;Yes
	CMPB	R1,#^A"="	;  or got just "G="?
	BEQL	SWHPRC		;Yes
	CMPB	R1,#^A"R"	;Global-read-only switch?
	BEQL	10$
	BRW	SWAERR		;No - error
10$:	MOVB	R4,GREFLG	;Yes - save the default read-only flag
	BRW	SWHRDO		;Set or clear read-only flag and return

SWHPRC:	BSBW	SWHARG		;Get percentage to go to
	BLBS	R0,SWHPC1	;Skip return?
	MOVL	GOPERC,R3	;No - so use current percent
	BRB	SWHPC2
SWHPC1:	TSTL	R3		;Got a negative percentage?
	BGEQ	SWHPC2
	MOVL	#100,R3		;Yes - treat as 100%
SWHPC2:	CMPL	R3,#100		;Is the value too big?
	BLEQ	10$
	BRW	SWGERR		;Yes - error
10$:	MOVL	R3,GOPRCT	;O.K. - save starting percent value
	RSB

SWHPPP:	CMPB	R1,#^A"A"	;Page-and-line status switch?
	BEQL	SWHPAG		;Yes - handle it
	CMPB	R1,#^A"I"	;Paragraph indent switch?
	BEQL	SWHPAR		;Yes - handle it
	CMPB	R1,#^A"R"	;Prog to run on exit switch?
	BEQL	10$		;Yes
	BRW	SWAERR		;No - it's ambiguous
10$:   	MOVZBL	(R6)+,R1	;Any argument given?
	BEQL	30$		;No
	CMPB	R1,#^A":"	;Check for colon or equals sign
	BEQL	20$
	CMPB	R1,#^A"="
	BNEQ	10$
20$:	BRW	SET_PROG	;Set up the program to run and return

30$:	CLRB	PROG_NAME	;If no argument, just clear the name
	RSB			;and return

SWHPAG:	MOVB	R4,PAGFLG	;Save page/lines flag
	RSB

SWHPAR:	BSBW	SWHAG0		;Read amount to indent a paragraph
	BLBS	R0,10$		;Any argument?
	CLRL	R3		;No arg - set no indent
10$:	MOVL	R3,PARIND	;Save the value
	RSB			;Done

SWHQQQ:	MOVB	R4,DSPFLG	;Save DISPLAY-ON-SETFIL flag
	RSB

SWHTRM:	MOVL	#^A"    ",XCTFIL ;Initialize term type to spaces (use execute
	MOVL	#^A"    ",XCTFIL+4 ;file name buffer for temporary)
	MOVAB	XCTFIL,R4	;Point to the argument storage
	BSBW	SWHAGA		;Go get the terminal type
	BLBS	R0,10$		;Was a value found?
	BRW	SWGERR		;No - error
10$:	MOVB	#^A" ",-1(R4)	;Put a space in where the null was put by SWHAGA
	PUSHR	#^M<R1,R2,R3,R4,R5,R6>
	MOVL	#NAMLEN,R6	;Get the number of entries
	DIVL	#4,R6
20$:	MOVAQ	TRMNAM[R6],R4	;Point to the name
	CMPC3	#8,XCTFIL,(R4)	;Is this the one?
	TSTL	R0
	BEQL	30$		;Yes
	SOBGEQ	R6,20$		;No - loop through the table
	POPR	#^M<R1,R2,R3,R4,R5,R6>
	BRW	SWGERR		;Not found - error
30$:	MOVL	NAMTAB[R6],TERMTYPE ;Save the terminal type code
	POPR	#^M<R1,R2,R3,R4,R5,R6>
	RSB			;and return

SWHFFF:	TSTB	R1		;Just "F" is ambiguous
	BNEQ	10$
	BRW	SWAERR
10$:	CMPB	R1,#^A"E"	;Fence switch?
	BEQL	SWHFNC		;Yes - handle it
	CMPB	R1,#^A"I"	;Justify-fill switch?
	BNEQ	SWHSTT		;No - go handle the file switches
	MOVB	R4,FLLFLG	;Yes - set the fill flag
	RSB			;Done

SWHFNC:	MOVB	R4,FNCFLG	;Save /FENCE setting
	RSB

;Here for various file status switches: FC, FR, FS, FD, FO
;If these are used, /FD must appear and be first

SWHSTT:	MOVL	R1,R2		;Save flavor of switch
	BSBB	SWHAG0		;Read its argument
	BLBS	R0,10$
	BRW	SWHERR		;No arg - error
10$:	CMPB	R2,#^A"C"	;FC (column position) switch?
	BEQL	SWHSTC		;Yes - go do it
	CMPB	R2,#^A"R"	;FR (row position) switch?
	BEQL	SWHSTR		;Yes - go do it
	CMPB	R2,#^A"S"	;FS (slide offset) switch?
	BEQL	SWHSTL		;Yes - go do it
	CMPB	R2,#^A"D"	;FD (display pointer) switch?
	BEQL	SWHSTD		;Yes - go do it
	CMPB	R2,#^A"O"	;FO (one-shot) switch?
	BEQL	SWHOSH		;Yes - go do it
	BRW	SWHERR		;Anything else is an error

SWHSTC:	MOVL	R3,PRERW+4	;Set up column position
	RSB

SWHSTR:	MOVL	R3,PRERW	;Set up row position
	RSB

SWHSTL:	MOVL	R3,PRESL	;Set up slide offset
	RSB

SWHOSH:	MOVL	R3,PREONE	;Set up one-shot pointer
	RSB

SWHSTD:	CLRQ	PRERW		;Clear the other pointers
	CLRL	PRESL
	ADDL3	#BUFFER,R3,PREDP ;Point to the right place
	RSB

;Subroutine to read colon (maybe) and numeric argument of a switch
;Returns value in R3; uses R1
;Returns R0=1 if value found, R0=0 if no colon found

SWHAG0:	MOVZBL	(R6)+,R1	;Get the colon
SWHARG:	CMPB	R1,#^A":"	;Got a colon?
	BEQL	SWHAG1		;Yes
	CMPB	R1,#^A"="	;or an equals sign?
	BEQL	SWHAG1		;Yes
	TSTB	R1		;No - try next one, if any
	BNEQ	SWHAG0
SWHAG1:	TSTB	R1		;Was a colon found?
	BNEQ	10$		;Yes
	CLRL	R0		;No - give the non-skip return
	RSB
10$:	MOVL	#1,R0		;Indicate colon was found
	CLRL	R3		;Clear the target
SWHAG2:	MOVZBL	(R6)+,R1	;Get a digit
	BNEQ	10$		;Return if null
	RSB
10$:	SUBL	#^A"0",R1	;Convert to numeric
	BLSS	SWGER0		;Error if not a number
	CMPL	R1,#9
	BGTR	SWGER0		;Not a number
	MULL	#10,R3		;Else multiply by ten
	ADDL	R1,R3		;Add in new digit
	BRB	SWHAG2		;and get another one

;Subroutine to read ascii argument of a switch into (R4)
;Returns R0/1 if a value was found, R0/0 if no value found

SWHGA0:	MOVZBL	(R6)+,R1	;Get the colon
SWHAGA:	CMPB	R1,#^A":"	;Is it really?
	BEQL	10$
	CMPB	R1,#^A"="	;How about an equal sign?
	BEQL	10$		;Yes - accept it in place of the colon
	TSTB	R1		;No - try next one, if any
	BNEQ	SWHGA0
	CLRL	R0		;No colon - indicate that
	RSB
10$:	MOVL	#1,R0		;Indicate colon was found
20$:	MOVB	(R6)+,(R4)+	;Save characters
	BNEQ	20$		;  until a null is found
	RSB			;Then return

;Subroutine to read ascii argument of a switch into (R4)
;Returns R0/1 if a value was found, R0/0 if no value found
;Delimiter (0 or ",") is returned in R1
;(Like above, but stops on a ",")

SWHGC0:	MOVZBL	(R6)+,R1	;Get the colon
SWHAGC:	CMPB	R1,#^A":"	;Is it really?
	BEQL	10$
	CMPB	R1,#^A"="	;How about an equal sign?
	BEQL	10$		;Yes - accept it in place of the colon
	TSTB	R1		;No - try next one, if any
	BNEQ	SWHGC0
	CLRL	R0		;No colon - indicate that
	RSB
10$:	MOVL	#1,R0		;Indicate colon was found
SWHGC1:	MOVB	(R6)+,R1
	BEQL	30$
	CMPB	R1,#^A","	;End of this value?
	BNEQ	40$		;No
30$:	RSB			;Yes
40$:	MOVB	R1,(R4)+	;Save characters
	BRB	SWHGC1		;  and get another

;If switch error output message, return to caller of SWHONE

SWHER0:	MOVL	(SP)+,R0	;Return to caller of SWHONE
SWHERR:	MOVAB	SWHERM,R1
SWHER1:	MOVAB	PARBUF,ERRCOD	;Bad switch is in PARBUF
	CMPL	R9,#$SETFI	;Doing a set-file?
	BNEQ	10$		;No
	BRW	STFERR		;Yes - give set-file-flavored error
10$:	BRW	ERROR		;Else display the error and return

SWAERR:	MOVAB	SWHERM,R1
	BRB	SWHER1

SWGER0:	MOVL	(SP)+,R0	;Return to caller of SWHONE
SWGERR:	MOVAB	SWGERM,R1
	BRB	SWHER1

SALERR:	MOVAB	SALERM,R1
	JMP	ERROR		;(Always treat as a non-set-file error)

SWMERR:	MOVAB	SWMERM,R1
	JMP	ERROR		;(Always treat as a non-set-file error)

SDCERR:	MOVAB	SDCERM,R1
	JMP	ERROR		;(Always treat as a non-set-file error)

SWHERM:	.ASCIZ	/#####Illegal switch "^A"/
SWAERM:	.ASCIZ	/##Ambiguous switch "^A"/
SWGERM:	.ASCIZ	/######Illegal or missing switch argument "^A"/
SALERM:	.ASCIZ	?####Use /ALT only at DCL level?
SWMERM:	.ASCIZ	?Can't use /RCUR and /AGAIN together?
SDCERM:	.ASCIZ	?######Illegal argument for /DC:?
;Subroutine to set up the program to run or command to execute
;Called from the /PROG= switch and at exit time if a parameter is given

SET_PROG::
	CLRB	PROG_FLAG	;Assume a program is to be run
	MOVAB	PROG_NAME,R4	;Tell where to store the data
	MOVZBL	(R6)+,R1	;Get a character
	BNEQ	5$		;Give an error if no argument is given
	BRW	SWGERR
5$:	CMPB	R1,#^A"$"	;Is it a dollar sign?
	BNEQ	10$		;No
	MOVB	#-1,PROG_FLAG	;Yes - indicate want to execute a command
	BRB	30$		;  and leave out the dollar sign
10$:	CMPB	R1,#^A"@"	;Want to execute a command file?
	BNEQ	20$		;No
	MOVB	#-1,PROG_FLAG	;Yes - remember it
20$:	MOVB	R1,(R4)+	;Save the character
30$:	MOVB	(R6)+,(R4)+	;Store the next character
	BNEQ	30$		;Loop until all are copied
	SUBL3	#PROG_NAME+1,R4,R1 ;Compute the number of characters
	MOVW	R1,PROG_BLOCK	;  and save them in the descriptor
	RSB			;Then return
.SUBTITLE	Switch Dispatch Table

SWHADR:	.ADDRESS SWHAAA		;A
	.ADDRESS SWHBBB		;B
	.ADDRESS SWHCCC		;C
	.ADDRESS SWHDDD		;D
	.ADDRESS SWHERR		;E
	.ADDRESS SWHFFF		;F
	.ADDRESS SWHGGG		;G
	.ADDRESS SWHHLP		;H
	.ADDRESS SWHIII		;I
	.ADDRESS SWHJJJ		;J
	.ADDRESS SWHKKK		;K
	.ADDRESS SWHLLL		;L
	.ADDRESS SWHMMM		;M
	.ADDRESS SWHNNN		;N
	.ADDRESS SWHOFL		;O
	.ADDRESS SWHPPP		;P
	.ADDRESS SWHQQQ		;Q
	.ADDRESS SWHRRR		;R
	.ADDRESS SWHSSS		;S
	.ADDRESS SWHTTT		;T
	.ADDRESS SWHUPP		;U
	.ADDRESS SWHERR		;V
	.ADDRESS SWHWWW		;W
	.ADDRESS SWHERR		;X
	.ADDRESS SWHERR		;Y
	.ADDRESS SWHERR		;Z

GLOB		;Define the global symbols
.END