Google
 

Trailing-Edge - PDP-10 Archives - decuslib20-07 - decus/20-0000/20-library-distribution-notes.mem
There are 10 other files named 20-library-distribution-notes.mem in the archive. Click here to see a list.


             DECSYSTEM-20 Library Distribution Notes

                     Prepared by David Todd
             DECUS DECSYSTEM-20 Library Coordinator
                          15 March 1981



     The following list describes the contents of the DECUS
DECSYSTEM-20 Library Distribution Tapes as of 15 March 1981.  The
program packages in the Library were converted from the
DECsystem-10 Library during the summer and autumn of 1980 by Paul
Robinson at Wesleyan University for DECUS.  During the
conversion, packages were evaluated using the following criteria:

     1.  Does the package support features available under
         TOPS-20 or on the DECSYSTEM-20?  For example, DECtape
         support packages were deleted.

     2.  Does the package compile, load, and begin execution
         successfully?

     3.  If test data are available, does the recompiled program
         correctly run the test data.

     4.  Is the package of such high potential value that even if
         it does not compile and load correctly it should be
         distributed in hopes an interested DECSYSTEM-20 user
         will develop a working package?

     5.  Even if there is no source code, is the package of such
         high potential value that users would benefit from
         having just the .EXE files available?

Under these criteria, the following packages were selected to
constitute the initial DECSYSTEM-20 Library.  The abstracts below
do not describe the packages but rather the state of the package
after review, and in cases where modifications were required, the
types of modifications made.  Refer to the DECUS DECSYSTEM-20
Library Catalog for program descriptions.

     Note that several of the major packages, notably PASCAL,
SIMULA, and SAIL/FAIL, were submitted as revised versions by
Charles Hedrick of Rutgers.  We are grateful to him for his help
in making these packages available.

     In the descriptions, the phrase "compiled, loaded, and
executed successfully" indicates that the program package begins
execution successfully but that no verification of the accuracy
of the program has been done.  The phrase "executes correctly"
indicates that the program was tested either with data supplied
with the package or with obvious test data and appears to execute
correctly on that test data.  

     Of course, DECUS cannot guarantee correct execution of any
of the packages but welcomes - in fact solicits - reviews of
packages which do not appear to function as specified.  For this
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 2


purpose, the first directory on the distribution tape,
<DECUS.20-0000> contains review forms and an interactive review
program which will aid you in preparing a review of any program
you use.  Please submit the completed review on 1600 bpi DUMPER
tape (preferably) or as typewritten copy of the completed review
form to DECUS for review by DECUS staff and inclusion on
subsequent releases of the distribution and update tapes.  You
will find on this tape reviews of several packages kept with the
package directory.  The review files have names of the form
DECnnn.RNO, where "nnn" is the number of the DEC-20 package.  The
reviews were completed for the versions running on the
DECsystem-10 but should still be valid for the DECSYSTEM-20
versions as well.

     The Library packages are stored as separate directories with
naming conventions <DECUS.20-nnnn>, where "nnnn" is a sequence
number.  Directory <DECUS.20-0000> contains Library
administration files such as the .RNO file which created this
document, a "disposition" document which tells the disposition of
DEC-10 library packages by DEC-10 number cross-referenced to
DEC-20 number, review programs and forms, and a file which can be
used by DLUSER to create DECUS directories if desired.  Note that
there are subdirectories under many DECUS.20-nnnn directories.

     The Library distribution tapes contain the complete DECUS
DECSYSTEM-20 program library packaged on 9-track, 1600-bpi,
DUMPER-format magnetic tape.  There are five tapes, and their
contents are as follow:

          Tape
          No.   Contents
          1     0000-0025
          2     0026-0076
          3     0077-0099
          4     0100-0135
          5     0136-0149

Each tape contains 8000 to 10,000 pages of programs.  We hope to
hav regular updates for these program plus new additions made
available in the future through a subscription service in the
same way the DEC-10 library is served.  Contact the DECUS office
for details.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 3


"20"      "10"
Number    Number    Status


0001      -         CALC (TOPS-20)
                    Compiles, loads, and runs successfully.
                    Indirect commands do not appear to function.

0002      86        SAIL/FAIL
                    Original DEC-10 version has been supplemented
                    by some routines supplied by Charles Hedrick
                    of Rutgers which fix bugs on the DEC-20.
                    Program appears to compile correctly.  The
                    newly compiled version differs from the one
                    submitted by Hedrick;  the newly compiled
                    version is the .EXE file and the version
                    submitted by Hedrick is SAIL-OLD.EXE.  Check
                    the file SAIL.LOG to see error messages
                    associated with compilation of SAIL.

0003      283       SYSTEMS PROGRAMMERS PASCAL
                    Native-20-mode System Programmer's PASCAL
                    from Charles Hedrick at Rutgers.  Executes
                    correctly in preliminary tests.  Has
                    excellent debugging enhancements over earlier
                    versions.

0004      -         INTERLISP (TOPS-20)
                    Patched BOOT.SAV to replace a JSYS which had
                    been deleted after Release 2 of TOPS-20;
                    program now begins execution.  Note that no
                    source files are supplied (.EXE only) and
                    that the first chapter of the manual is
                    missing.  Other chapters renamed *.DOC.

0005      12        PAL-10
                    Minor modification required in logical name
                    list;  compiles, loads, and runs
                    successfully.

0006      22        JACOBI
                    Converted subroutine calls to PUSHJ/POPJ;
                    now compiles correctly.  Execution testing
                    not done.

0007      23        SPEEDY (PDP-10/8 Loader)
                    Loader appears to run from a load of the .REL
                    file (no testing done).  Source file is
                    garbled and cannot be used to generate the
                    .REL file.

0008      27        GASP II
                    Compiles and loads cleanly.  No further
                    testing done.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 4


0009      30        NVERTX
                    Compiles with some warning messages, loads,
                    and runs to completion with the test data
                    supplied.

0010      31        PALX-11
                    Compiles, loads, and begins execution.  No
                    testing done.

0011      33        W
                    Converted octal constants to form required by
                    FORTRAN-20;  program compiles and runs.

0012      38        FLOW CHARTER
                    Compiles, loads, and runs successfully.

0013      43        RANDOM NUMBERS
                    Converted subroutine calls to PUSHJ/POPJ;
                    programs now compile, load, and run
                    successfully.  Results not checked for
                    accuracy.

0014      57        SIMPLE
                    Converted subroutine calls to PUSHJ/POPJ;
                    programs now compile, load, and correctly run
                    the test data supplied with the programs.

0015      59        LISP 1.6
                    Redefined JOBDAT symbols and replaced one
                    outdated JSYS.  Some possible problems with
                    source file ALVINE.MAC (HRRZ@ opcodes).  No
                    testing done on this package.

0016      61        MLISP
                    No modifications required.  Package is
                    expected to be a transportable LISP package,
                    but no testing was done.

0017      65        LEARNS
                    Program compiles, loads, and runs
                    successfully.

0018      68        PAL-12
                    Modified logical name search;  program
                    compiles, loads, and successfully executes
                    two test programs supplied.

0019      70        FAKE
                    Converted subroutine calls to PUSHJ/POPJ and
                    redefined JOBDAT symbols.  Program assembles;
                    no testing done.

0020      72        DARTMOUTH BASIC LIBRARY
                    Random sample of programs tested appear to
                    function correctly.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 5


0021      88        SALESMAN
                    Program compiles and runs successfully.

0022      89        JOTTO
                    Typographical errors were corrected.  Program
                    compiles but needs a dictionary.

0023      90        BARTEE
                    Redefined JOBDAT symbols;  program
                    compiles,loads, and correctly executes test
                    data given in .DOC file.

0024      97        BASIC TUTORIAL
                    A random sample of programs tested functioned
                    correctly.

0025      100       ONLINE BASIC AND FORTRAN DEMOS
                    A random sample of the BASIC programs ran.
                    FORTRAN files which did not run were modified
                    for FORTRAN-20 compatibility.  Files were
                    given filetypes .BAS, .FOR, and .TXT,
                    depending upon their functions.  Calling
                    sequence of RAND.MAC was converted to
                    PUSHJ/POPJ.

0026      101       SSP
                    Programs ran without modification and gave
                    results in agreement with expected test
                    results to within 5 to 7 significant figures.

0027      102       PDP-8 SIMULATOR
                    Changed JOBDAT symbols;  compiles, loads, and
                    runs successfully.

0028      104       SNOBOL4
                    Converted .SHR to .EXE file;  the .EXE file
                    runs.  No attempt to recompile and reload
                    (which should be done).

0029      105       DOCTOR AND ELIZA
                    Converted .SAV to .EXE file, which functions
                    correctly.  No source file is included.

0030      110       CHESS
                    Converted .SAV file to .EXE file, which
                    functions correctly.  No source file is
                    included.

0031      114       MATTAC
                    Converted .SAV file to .EXE file, which runs.

0032      115       TAPBLK
                    Converted .SAV file to .EXE file, which
                    begins execution.  Did not test.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 6


0033      116       QED
                    Redefined JOBDAT symbols.  Program compiles,
                    loads, and executes.

0034      130       RENBR
                    Compiles, loads, and runs successfully.  The
                    .CMD file was modified for TOPS-20.

0035      133       ALGOLW
                    Redefined JOBDAT symbols.  Program compiles,
                    loads, and runs successfully.

0036      134       FISHER
                    Edited the source file to delete extra
                    CRLF's.  Program compiles, loads, and runs
                    successfully.

0037      137       COB300
                    Modified one variable to be a non-reserved
                    word;  program compiles and loads.  Should be
                    tested on a Burroughs COBOL program.

0038      139       TALK8F
                    Redefined format of octal constants and
                    redefined JOBDAT symbols.  Program compiles,
                    loads, and runs.  Needs a PDP-8 for testing.

0039      142       MATHLAB
                    Converted .SAV to .EXE file, patched ESC
                    character as described in manual.  Program
                    ran test case in manual correctly.  Program
                    should be recompiled and reloaded.

0040      143       COBSTD
                    Minor syntactical correction required, but
                    otherwise program compiled, loaded, and ran
                    successfully.

0041      151       KWIC
                    Compiles, loads, and runs successfully.

0042      153       CHANGE
                    Redefined JOBDAT symbols.  Program compiles,
                    loads, and runs.  Needs testing.  Note that a
                    revised version is available directly from
                    DEC.

0043      156       ASYNC COMMUNICATION WITH PDP-8
                    Redefined JOBDAT symbols and altered logical
                    name search.  Programs now compile, load, and
                    run.  Needs testing with a PDP-8.

0044      157       STREAM
                    Changed subroutine calls to PUSHJ/POPJ's.
                    Fixed argument list references.  Program now
                    compiles and loads.  Needs testing.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 7


0045      159       PAGER
                    Program compiles, loads, and runs
                    successfully.

0046      161       ABACUS
                    Minor modifications required because of MACRO
                    version changes.  Program compiles, loads,
                    and runs successfully.

0047      164       CROSS
                    Created IOFIL.FOR to handle IFILE/OFILE
                    subroutine calls from F40 and modified
                    RENAME.MAC to use PUSHJ/POPJ calls.  Modified
                    FORMAT statements.  Program now compiles,
                    loads, and runs test case correctly.

0048      165       RDMT11
                    Compiles, loads, and runs successfully.
                    Needs testing with PDP-11 magnetic tapes,
                    though.

0049      167       GENPLT
                    Added DOUBLE PRECISION statement to allow 6
                    characters per word.  Programs compile, load,
                    and run test case correctly.

0050      168       TBLTRN
                    Modified one macro subroutine to use
                    PUSHJ/POPJ calling convention.  Program
                    compiles, loads, and runs successfully.

0051      169       CTFFT
                    Program compiled, loaded, and ran one test
                    file correctly (within roundoff error).  The
                    other test file (for subroutine FOURG) was
                    garbled at the time of original submittal.
                    The subroutine compiles, however.

0052      170       UFLIP
                    Program compiled, loaded, and ran test case
                    correctly.

0053      171       CARDIAC MACHINE LANGUAGE SIMULATOR
                    Corrected one mistyped line in the BASIC
                    program.  Program runs successfully.

0054      173       FLMON
                    Program compiles, loads, and runs
                    successfully.  Needs testing with a plotter.

0055      177       SIGN MAKER
                    Changed format of octal constants to
                    FORTRAN-20 form;  changed DEFINE FILE to
                    OPEN;  and changed search for SIGN.LIB from
                    [1,4] to SYS:.  Program compiles, loads, and
                    runs correctly.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 8


0056      178       MTIO
                    Changed calling sequence to PUSHJ/POPJ.
                    Program compiles.  Needs to be tested with a
                    magtape and main program.

0057      179       FASBOL
                    Converted .SAV to .EXE file, which appears to
                    run (saved as FASBOL.EXE).  Recompiled,
                    reloaded, and resaved as SNOBOL.EXE (which
                    appears to run correctly).

0058      181       EDITS
                    A spurious character in source file was
                    deleted.  Program compiles, loads, and runs
                    successfully.

0059      182       TXTPAD AND TXTTAB
                    Programs compile.  TXTPAD has undefined
                    globals on loading because of need for
                    hardware routines.  TXTTAB ran successfully.

0060      183       GRAPH
                    Subroutines compile and load with warnings.

0061      185       SYNTAX
                    Fails to compile, but code is sufficiently
                    similar to PASCAL that conversion to working
                    PASCAL code should be relatively easy.  Left
                    in the library for revision by interested
                    user.

0062      186       META2
                    Redefined .JBFF;  program compiles, loads,
                    and runs successfully.

0063      187       ASYNCH COMMUNICATION
                    Converted calling sequence to PUSHJ/POPJ for
                    FORTRAN subroutines.  Programs compile and
                    load.  Needs testing.

0064      189       MAFIA
                    Redefined JOBDAT symbols.  Program compiles,
                    loads, and runs successfully.  Needs testing.

0065      190       BATTLESHIP
                    Program runs.

0066      193       *1
                    Needs to be recompiled.  No testing done.

0067      197       FILTER
                    Sources compiled with numerous errors caused
                    by use of (new) reserved words.  Changes yet
                    to be made but should be easy to fix.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT     Page 9


0068      198       IMP72
                    Converted .SAV file to .EXE, which ran
                    successfully.  Recompilation fails for some
                    program modules.

0069      200       VTED AND RTRANS
                    RTRANS runs correctly.  VTED needs testing on
                    DEC VT terminals.

0070      203       GUNNER
                    Program runs correctly.

0071      207       EYES
                    Compiles, loads, and runs successfully.

0072      208       SCAT2
                    Program compiles, loads, and runs
                    successfully.

0073      209       RANDU
                    Subroutine compiles, loads, and runs
                    successfully.  Results not verified for
                    accuracy.

0074      211       GNOSIS
                    Program compiles, loads, and runs
                    successfully.

0075      212       SPPLT AND SPTEX
                    Programs compile and run successfully.

0076      214       ABACUS
                    Converted JOBDAT symbols.  Program compiles,
                    loads, and runs successfully.

0077      221       NMRSIM AND TTYOPS
                    Changed subroutine calling sequence to
                    PUSHJ/POPJ;  programs compile, load, and run
                    successfully.  No testing without plotter
                    hardware.

0078      223       SIMULA
                    Compiler assembled, loaded, and ran
                    successfully.  Note an error message
                    associated with module M2.MAC which is
                    apparently caused by a misplaced conditional
                    terminator, but the resulting symbol is
                    properly defined as external nevertheless.
                    Note that the package has been reorganized to
                    contain just DEC-20 code.

0079      224       SPICE/SLIC/SINC
                    Programs compile, load, and run correctly.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT    Page 10


0080      226       AVAIL
                    Programs compile, load, and run correctly.
                    Note that there is a requirement for
                    directory numbers, though.  This program
                    should be modified when a native-20 FOROTS
                    system is available.

0081      227       UTILITIES
                    Some programs in this package needed COBOL
                    variable-names to be changed because of
                    changes in COBOL reserved words;  they then
                    compiled, loaded, and ran successfully.
                    Others in the package appear to be incomplete
                    and unusable.  Complete package is left in
                    the library for those who want to work on
                    them.

0082      228       CALCOMP PLOTTER PACKAGE
                    Some modifications required to get package to
                    load properly.  Programs compile, load, and
                    run successfully.  Requires plotter hardware
                    to verify.

0083      229       ASTRO
                    Program compiles, load, and runs
                    successfully.

0084      230       ASYNCH COMMUNICATION
                    Programs compile, load, and run successfully.
                    No testing done.

0085      233       ZAP
                    Program compiles, loads, and runs
                    successfully.

0087      235       LAN
                    Programs run.  No testing done.

0088      237       PILOT
                    Modified compiler to look for PILOT.EXE
                    rather than PILOT.SHR.  Compiler compiles
                    with a few MACRO "E" errors, but loads
                    successfully.  Resulting program successfully
                    compiled the demo program supplied.

0089      238       EXETER
                    Programs compile (with truncation warnings),
                    load, and run successfully.

0090      240       KISMET
                    Modified search path for help file.  Program
                    compiles, loads, and runs successfully.

0091      241       FORTH
                    Compiles, loads, and runs successfully.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT    Page 11


0092      244       WGMM11
                    Corrected garbled characters in middle of
                    source file.  Program now compiles, loads,
                    and runs successfully.

0093      245       MESS
                    Programs compile, load, and run successfully.

0094      248       TR
                    Program compiles, loads, and runs
                    successfully.

0095      249       GAUSS
                    Subroutines compile.  No testing done.

0096      251       TBF
                    Program compiles, loads, and runs
                    successfully.

0097      253       READ
                    Program compiles, loads, and runs
                    successfully.

0098      254       MAGGIE
                    Program compiles, loads, and runs
                    successfully.  Needs testing with magnetic
                    tape.

0099      255       INVSIM
                    Program compiles, loads, and runs
                    successfully.

0100      257       LINCUR
                    Revised submittal lacked functions DARCOS and
                    DARSIN which were in the sources for original
                    submittal.  These were copied from original
                    into file DAFUNS.FOR and the load command
                    string modified.  File LINCUR.CTL contains
                    revisions necessary to compile, load, and
                    test revised version on a DEC-20.  Programs
                    compile, load, and run successfully.

0101      258       NONLIN
                    Revised submittal lacked functions DARCOS and
                    DARSIN which were in the sources for original
                    submittal.  These were copied from original
                    into file DAFUNS.FOR and the load command
                    string modified.  File NONLIN.CTL contains
                    revisions necessary to compile, load, and
                    test revised version on a DEC-20.  Programs
                    compile, load, and run test data correctly.

0102      260       INFORMATION STORAGE AND RETRIEVAL
                    Program compiles and runs successfully.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT    Page 12


0103      261       SORTER
                    Program compiles and runs successfully.

0104      262       COMPUT AND TWOPER
                    Programs compile and run successfully.

0105      264       XTEC
                    Program compiles, loads, and runs
                    successfully.

0106      265       BASIC 17E
                    Note that there are no sources.  The .SHR
                    files were converted to .EXE files and ran
                    correctly.  Note the bugs listed in the
                    review.

0107      266       TOPS-10 SIMULATOR
                    Compiles with warnings, loads, and runs
                    successfully.  No documentation of format of
                    parameter file.

0108      267       COBEDT
                    Program compiles, loads, and runs
                    successfully.

0109      269       ADRES
                    Program compiles (under SIMULA, 20-0078),
                    loads, and runs successfully.

0110      270       PROC10
                    Converted .SHR to .EXE file, which runs.
                    Cannot recompile and reload because of
                    missing source modules.

0111      272       BESLIB
                    Program compiles, loads, and correctly runs
                    test case.

0112      273       INDEX
                    Program compiles, loads, and runs BESLIB test
                    case successfully.

0113      274       CADA
                    Program compiles and runs successfully.

0114      276       FPRINT
                    Subroutine compiles correctly.  Not tested.

0115      277       TWOSID
                    Program compiles, loads, and runs correctly.

0118      284       PICTURE BOOK
                    Modified INCH and OUTCH for TOPS-20 MACRO.
                    Programs compile, load, and run successfully.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT    Page 13


0119      285       SQUASH
                    Modified subroutines to use PUSHJ/POPJ
                    convention;  program compiles, loads, and
                    runs successfully.

0120      286       CUSH2
                    Program compiles, loads, and correctly
                    executes test data from documentation.

0121      290       VENN
                    Program compiles, loads, and runs
                    successfully.

0122      291       XPL
                    Program compiles, loads, and runs
                    successfully.

0123      292       REVISED PLOTTER SUBROUTINES
                    Programs compile, load, and run successfully.

0124      293       FLECS
                    Program compiles, loads, and runs
                    successfully.  Implementation manual, which
                    was supposed to be with package, was not.

0125      295       GIDUS/DISLIB
                    Programs compile successfully.  No testing
                    done.  New command file was created.

0126      297       ATOPLT
                    Program compiles, loads, and runs
                    successfully.  Needs testing.

0127      298       NORMAL
                    Program compiles, loads, and runs
                    successfully.

0128      299       COPYMT
                    Program compiles, loads, and runs
                    successfully.

0129      300       BAKGMN
                    Program compiles, loads, and runs
                    successfully.

0130      301       STRMAC
                    Program compiles, loads, and runs
                    successfully.

0131      302       LIBMAN
                    Program compiles, loads, and runs correctly
                    (except that the DIRECT program doesn't exist
                    on TOPS-20).
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT    Page 14


0132      303       DUMPR
                    Program compiles, loads, and runs
                    successfully.

0133      305       BIORTH
                    Replaced a GETTAB UUO with GTAD JSYS.
                    Program compiles, loads, and runs
                    successfully.

0134      306       FOCAL-10
                    Program compiles, loads, and runs
                    successfully.  Extensive testing not done.

0135      307       VIDED
                    Source files for latest version are in COMP
                    subdirectory but will not load correctly
                    because of multiply-defined globals.  Source
                    files for older version are in SOURCE and
                    will not compile under current SIMULA
                    (20-0078).  The .EXE files from the earlier
                    version are in the SYS subdirectory.

0136      309       MACY-11/LNKX-11
                    Programs compile, load, and run correctly.

0137      310       WMU Application Library
                    Most programs work as submitted.  Some work
                    done to load without overlays.  Individual
                    packages were split into separate
                    subdirectories.  Note that source code for
                    the application library built into WMU's
                    FORLIB are not contained in the package and
                    are referenced from APLIB.REL and FORLIB.REL
                    in the superior directory.

0138      312       MAGTAPE UTILITY PACKAGE
                    Programs compile, load, and run successfully.

0139      316       TECO10
                    Renamed files to TECO20, recompiled with
                    TOPS-20 option on.  Compiles, loads, and
                    runs.  Does not recognize filename supplied
                    on command line, but does seem to function.

0140      317       CROSS
                    Program compiles, loads, and runs
                    successfully.

0141      318       FASP
                    Program compiles, loads, and runs
                    successfully.

0142      319       WKDAY
                    Program compiles, loads, and runs correctly.
DECSYSTEM-20 Library Distribution Notes [2 Feb 81]/HDT    Page 15


0143      320       STRUCT
                    Macros compile and seems to work.

0144      322       CALENDAR MAKER
                    Data files generate output as desired.

0149      324       MULREG
                    Program compiles with warning messages and
                    loads and runs correctly (when compiled with
                    the DEC-20 SIMULA from DECUS).  Packages
                    included so that anyone with SIMULA
                    experience can attempt to determine the
                    source of the problem.

0145      325       ANTE
                    Compiles, loads, and runs successfully.

0146      326       KEYWRD
                    Compiles, loads, and successfully runs test
                    case supplied by author.

0147      328       FORMAT
                    Compiles, loads, and successfully runs test
                    case supplied by author.

0148      184       SPELL
                    Original program failed to compile because
                    symbols in conditional statements weren't
                    assembled and defined;  simple fixes to
                    source file were required.  Program now
                    compiles and runs correctly.  Dictionary is
                    preloaded in the .EXE file supplied.

0149      324       MULREG
                    Compiles using SIMULA (20-0078) with warning
                    messages, loads successfully, and appears to
                    process author-supplied test data correctly.