Google
 

Trailing-Edge - PDP-10 Archives - cust_sup_cusp_bb-x130c-sb - 10,7/unscsp/sos/sosmcr.doc
There are 5 other files named sosmcr.doc in the archive. Click here to see a list.


                               SOS MACROS



1.0  INTRODUCTION

SOS provides a  powerful  macro  capability  to  the  experienced  user.
Macros  expand into text which can be some or part of a command, or even
multiple commands.  A facility is also available to repeat a given macro
n  times, or until it fails, and also to allow variable parameters to be
included in the macro definition.  The key to  understanding  and  using
SOS  macros  is  to  remember  that  they are purely a text substitution
facility.



2.0  SYNTAX

SOS uses the special characters < and > to  denote  a  macro  name.   By
default  <  and  >  are  treated as regular characters wherever they are
encountered.  However, to use macros SOS  must  recognize  <  and  >  as
special  characters.   To enable this use the switch /MACRO.  To disable
special treatment of macros and <>, specify the switch /NOMACRO.



2.1  Simple Macros

2.1.1  Expansion - A macro name consists of a letter followed by  up  to
five  more  letters  and digits (i.e., a standard variable name).  It is
specified in the command line (anywhere) by enclosing  its  name  inside
angle  brackets.   For  example,  if  the macro CMD contained the string
"P.-5!10" and was expanded at command level by <CMD>  then  the  command
"P.-5!10"  would be performed.  Again, a macro can expand into a part of
a command, or several commands.  It also can be expanded when one is  in
INSERT  mode.   For  example,  assume  macro  R1  contained "100" and R2
contained "500" then the string P<R1>:<R2> would expand into "P100:500".
Also, macros can invoke other macros.  Assuming the above definitions of
R1 and R2, and the macro RANGE is  defined  to  be  <R1>:<R2>  then  the
string P<RANGE> would also expand into "P100:500".



2.1.2  Definition - A macro is defined with the define switch, which has
the format

     /DEFINE:name:text

where NAME is the  name  of  the  macro,  and  TEXT  is  the  string  of
characters  associated  with  the  macro name.  The text argument of the
macro is terminated with the carriage  return.   However,  the  carriage
return is not included in the macro definition.  Multiline macros may be
defined by delimiting the text (which  contains  multiple  lines)  by  a
delimiter  of  the users choice.  Single and double quotes (' and ") are
commonly used.  Also, to  include  a  quote  inside  a  multiline  macro
                                                                  Page 2


definition quote it.  For example, the command

*/DEFINE:STRING:"Here is a
M*multiline macro ""with an embedded"" quoted string
M*"

would define STRING to be the text  specified,  without  the  delimiting
quotes,  and  the  text  "with an embedded" including the quotes.  Also,
note that SOS prompts for multiline macros with the prompt M*, and  also
that the macro includes a CRLF following the text quoted string.



2.2  Macros With Arguments

2.2.1  Expansion - Macros that take arguments are  named  and  specified
like  a  simple  macro,  with the addition of an argument list specified
inside parentheses separated by commas inside the angle  brackets.   For
example,  expansion  of  the  macro  NAME with two arguments P and 100/5
would be <NAME(P,100/5)>.  "P" and "100/5" are text strings and used  by
the  definition  of the NAME macro.  For example, if NAME was defined to
be "<1><2>" then when the macro was expanded, the first  dummy  argument
<1> would be replaced with the users first argument "P" and <2> would be
replaced with the users second argument  "100/5"  producing  the  string
"P100/5".



2.2.2  Definition - Macros with arguments are defined in  the  same  way
simple  macros  are,  except  wherever the text of the first argument is
desired to be inserted, <1> is used.  Subsequent arguments are specified
by  <2>,  <3>,, etc.  Also, there is no reason why the definition cannot
use argument one several times.



3.0  OTHER MACRO FEATURES

3.1  LDEFINE Switch

The /LDEFINE switch defines a macro to  be  the  text  corresponding  to
evaluated  range of a legal range specifier following.  The general form
of /LDEFINE is

     /LDEFINE:name:range

where NAME is the macro name to be defined, and RANGE is any legal range
specifier.    For   example,   if   .-5  was  line  1500  page  7,  then
/LDEFINE:LOC:.-5 would define LOC to be "01500/7".   Also,  if  *-5/.+10
was  line  6000  page 17, then /LDEFINE:SOURCE:.-5:*-5/.+10 would define
SOURCE to be "01500/7:06000/17".  This switch is useful to evaluate  and
remember mnenomic line ranges.
                                                                  Page 3


3.2  MACRO Repeat

Any macro may be repeatly expanded by including a repeat count separated
from  the name by a comma and preceding the closing angle bracket.  This
will  expand  the  text  of  the  macro  n  times.   For   example,   if
/DEFINE:STR:ABC  was  given,  then  the expansion <STR,3> would generate
ABCABCABC.  Note that the carriage return  is  not  part  of  the  macro
therefore,  the text is not separated by carriage returns.  Consider the
command /DEFINE:DLINE:D.  was given, then the expansion <DLINE,2>  would
generate D.D.  which would produce a command error.  The intent probably
was to generate D.  <carriage return> D.  <carriage return>.   In  order
to  do  this  the  macro  DLINE  would have to be defined to include the
carriage return in its definition.  This can be done with the  multiline
define  feature  and  quoting  described  above.  Another alternative to
specifying a repeat count is to specify ",*", in which case the macro is
expanded indefinitely until it fails.  (See section on ERROR HANDLING)



3.3  SEARCH String Predefined Macros

There is a powerful pattern matching capability that can  be  used  with
SOS  Find  and Search commands (the ^E syntax).  When any F or S command
is done that contains ^E match strings, a macro is defined corresponding
to  each  match string found.  Thus, like on an output substitute string
^E2M returns the second input match  string,  the  macro  name  <2M>  is
defined  to  also  be this string.  This definition takes place even for
the match strings on a F command, even though ^E2M is not allowed as  no
output  specification  is  given for a F command.  For example, consider
the task of writing  out  to  a  file  whose  name  is  the  name  of  a
subroutine,  the  body of the FORTRAN subroutine.  Assume the subroutine
is on a page by itself.  Then the sequence of commands

     FSUBROUTINE ^E*^EA($
     O:<1M>,/.

would output the current page (/.) to the file whose name was matched by
the pattern ^E*^EA (i.e., the subroutine name).



3.4  ERROR HANDLING

When SOS gets any sort of command or  syntax  error  it  terminates  the
repeat  count  for  the current macro, and pops up a macro level, if the
macro was nested.  If it pops up to the top level, control  is  returned
to the user at command level.  For example ^bl 1;*/DEFINE:DFIRST:"D^
M*.=/.+1
M*"

when expanded <DFIRST,*> will continue deleting the first  line  on  the
current  page and advance the pointer to the next page until SOS gets an
error.  In this case it will probably  be  %NSP  (%No  such  page)  when
.=/.+1  advances  past  the  end  of file.  Then, since the macro is not
nested, control will return to the user at command level.
                                                                  Page 4


3.5  OUTPUT Of MACROS

There exist several ways to output and/or save macros from  one  editing
session to the next.



3.5.1  =DEFINE Command - This command outputs to the terminal the  names
and text of all user defined macros.



3.5.2  This command evaluates the string following the !  (including any
macros  encountered) and types the result out.  For example, the command
"!Hi there" would simply type out "Hi  there"  (a  useful  flow  control
feature  in  complex  macros or command files).  Consider a more complex
case with the macro STUFF defined to be "This is first arg:<1>, and this
is second arg:<2>", then "!Watch <STUFF(ABC,123)>" would type out "Watch
This is first arg:ABC, and this is second arg:123".



3.5.3  OM:file Command - This command is similar  to  the  O:   command,
except  it  does  not take a range of lines.  Instead, all the currently
defined macros are output in a disk file, in such a way that they can be
read in as an indirect command file to define them all again.