Google
 

Trailing-Edge - PDP-10 Archives - cust_sup_cusp_bb-x130c-sb - 10,7/unscsp/sos/sosdat.mac
There are 3 other files named sosdat.mac in the archive. Click here to see a list.
	TITLE	SOSDAT - DATA AND CHARACTER TABLES
	SEARCH	SOSTCS
	$INIT(-)
;		--------------------------------
; 
;  Data and character tables.
; 
	SUBTTL	CHARACTER TABLES

; A character table for use on type in and type out

; Flags used in character table

OPF==10		; This is a special character
SNUMF==4	; This is part of a number
LETF==2		; This is a letter
TERM==1		; This is a terminator
M37==400000	; This chr is printed as itself on model 37
NSEPF==200000	; This is not a seperator (used on $,%,and.)
DEFINE CHRS (FLAGS,PALT,INALT,RH)
<BYTE (4) FLAGS (7) PALT,INALT(18)RH>

CTBL::	0
	CHRS	OPF,"!","",""
	CHRS	OPF,42,"",""
	CHRS	OPF,"#",3,3
	CHRS	OPF,"$",4,4
	CHRS	OPF,"%",5,5
	CHRS	OPF,"&",6,6
	CHRS	OPF,"'",7,7
	CHRS	OPF,"(",10,10
	0
	CHRS	OPF!TERM,0,12,12
	CHRS	OPF,0,13,13
	CHRS	OPF!TERM,0,14,14
	0
	CHRS	OPF,")",16,16
	CHRS	OPF,"*",17,17
	CHRS	OPF,"+",20,20
	CHRS	OPF,54,21,21
	CHRS	OPF,"-",22,22
	CHRS	OPF,".",23,23
	CHRS	OPF,"/",24,24
	CHRS	OPF,"0",25,25
	CHRS	OPF,"1",26,26
	CHRS	OPF,"2",27,27
	CHRS	OPF,"9",30,30
	CHRS	OPF,"6",31,31
	CHRS	OPF,"4",32,32
	CHRS	OPF,"=",33,33
	CHRS	OPF,74,34,34
	CHRS	OPF,76,35,35
	CHRS	OPF,"7",36,36
	CHRS	OPF,"8",37,37
	0
	CHRS	OPF,0,1,"!"
	CHRS	OPF,0,2,42
	CHRS	OPF,0,3,"#"
	CHRS	OPF,0,4,"$"+NSEPF
	CHRS	OPF,0,5,"%"+NSEPF
	CHRS	OPF,0,6,"&"
	CHRS	OPF,"'","'","'"+M37
	CHRS	OPF,0,10,"("
	CHRS	OPF,0,16,")"
	CHRS	OPF,0,17,"*"
	CHRS	OPF,0,20,"+"
	CHRS	OPF,0,21,54
	CHRS	OPF,0,22,"-"
	CHRS	OPF,0,23,"."+NSEPF
	CHRS	OPF,0,24,"/"
	CHRS	SNUMF,0,25,20
	CHRS	SNUMF,0,26,21
	CHRS	SNUMF,0,27,22
	CHRS	SNUMF,0,176,23
	CHRS	SNUMF,0,32,24
	CHRS	SNUMF,0,"5",25
	CHRS	SNUMF,0,31,26
	CHRS	SNUMF,0,36,27
	CHRS	SNUMF,0,37,30
	CHRS	SNUMF,0,30,31
	CHRS	OPF,0,174,":"
	CHRS	OPF,0,73,73
	CHRS	OPF,0,34,74
	CHRS	OPF,0,33,"="
	CHRS	OPF,0,35,76
	CHRS	OPF,0,37,"?"
	CHRS	OPF,0,140,"@"
XXZ=101
REPEAT ^D26,<CHRS	LETF,0,XXZ+40,XXZ-40
XXZ=XXZ+1>
	CHRS	OPF,0,173,"["
	CHRS	OPF,0,"\","\"
	CHRS	OPF,0,175,"]"
	CHRS	OPF,0,"^","^"
	CHRS	OPF,0,"_","_"
	CHRS	OPF,100,140,140
XXZ=141
REPEAT ^D26,<CHRS	LETF,XXZ-40,XXZ,XXZ-100
XXZ=XXZ+1>
	CHRS	OPF,"[",173,173+M37
	CHRS	OPF,":",174,174+M37
	CHRS	OPF,"]",175,175+M37
	CHRS	OPF,"3",176,176
	CHRS	OPF,"\",177,177
	CHRS	OPF,0,0,200

; Define CCL IOWD here
IFN %UACCL,<
ESFIOW::IOWD	CCLSVL,CCLSVB
	IOWD	CCLS2L,RPGR	; Save results of last /RUN
	EXP	0		; Zero end world
>

; The UUO dispatch and OPCODE table follows


IOTAB::	Z	XENTUU##
	OPEN.	OPNSTR##
	Z	IFN FTVDDT,<CORUUO##>
	RLEAS.	IOEXCT##
	INBUF.	IOEXCT
	OUTBF.	IOEXCT##
	USETI.	IOEXCT##
	USETO.	IOEXCT
	IN.	XINOUT##
	INPUT.	IOEXCT
	OUT.	XINOUT##
	OUPUT.	IOEXCT
	STATZ.	IOEXCT
	STATO.	IOEXCT
	OPEN.	IOEXCT
	CLOSE.	IOEXCT
	LOOKP.	XLKPFL##
	ENTER.	XCTENT##
	RENAM.	XCTRNM##
	GTSTS.	IOEXCT
	STSTS.	IOEXCT

; Special constants

CRLF::	BYTE	(7) 15,12
LNOVER::EXP	<ASCIZ/9999:/>!1
LNZERO::EXP	<ASCIZ/00000/>!1
LN100::	EXP	<ASCIZ/00100/>!1
LN10::	EXP	<ASCIZ/00010/>!1
LN1::	EXP	<ASCIZ/00001/>!1
PMTSZP::POINT	18,PMTSTR,17
STDPMT::XWD	1,[ASCIZ/*/]


ONMPTR::POINT	6,OUTNAM
OEXPTR::POINT	6,OUTEXT
	SUBTTL	IMPURE DATA REGION

; Impure section is divided into two areas
; 1) data which is semi constant
; 2) data which is initially zeroed

DATAB::	
IFN RENTSW,< RELOC 0	; Switch to low seg
DATABL::RELOC
	PHASE DATABL>

; Channel and IO UUO TABLE blocks follow

CHNTAB::XWD	0,0		; For channel zero -- not used
	Z	TTY,TTDEVI	; For channel 1 -- TTY
CHNIN::	Z	IN,INDEVI	; For channel 2 -- INPUT
CHNOUT::Z	OUT,OUDEVI	; For channel 3 -- OUTPUT
	Z	LPT,LPDEVI	; For listing device
	Z	ALTDV,ALDEVI	; For channel -- Alternate
	Z	IND,INDDVI	; For indirect channel
	Z	OPT,OPTDVI	; For option file


INDEVI::EXP	17
	SIXBIT /DSK/
	XWD OBUF1,IBUF1

OUDEVI::EXP	17
	SIXBIT /DSK/
	XWD OBUF2,IBUF2

ALDEVI::EXP	17
	SIXBIT /DSK/
	XWD OBUF3,IBUF3

TTDEVI::XWD	400000,101
	SIXBIT	/TTY/
	XWD	0,CTIBUF	; Input only


OPTDVI::EXP	1
	SIXBIT	/DSK/
	XWD	0,OPTBHD

OPTFIL::EXP	4
	EXP	0
	SIXBIT	/SWITCH/
	SIXBIT	/INI/
	EXP	0

INIDVI::EXP	1
	SIXBIT	/DSK/
	XWD	0,INDBUF
INIFIL::EXP	4
	EXP	0
	SIXBIT	/XSOS/
	SIXBIT	/INI/
	0

; ---
PGMK::	<ASCII /     />!1	;\Keep
PGMKW2::BYTE (7)15,14,0,0,0	;/Together
; ---

SQBUF::	BLOCK 1
	ASCII /	/
IFN LSTSW,<				; [211]
PGHS::	BYTE(7)11,11," "," "," "	; tab, tab, 3 spaces (1 word)
REPEAT 6,<ASCII /     />		; 30 spaces (6 words) for filename
REPEAT 3,<ASCII /     />		; 15 spaces (3 words) for date & time
	BYTE (7)15,"P","a","g","e"," "	; (2 words) for page number

LPDEVI::EXP	1
	SIXBIT /LPT/
	XWD LOBUF,HLPBUF
>

ERRHD::	EXP	0	; Uuohs come here
	JRST ERRHD0##

ASCZ1::	ASCII /Inc1=/
PRNTO1::EXP	0
	ASCIZ /
/
ASCIZ2::ASCII /Inc2=/
PRNTO2::EXP	0
	ASCIZ /
/
COMESS::ASCIZ /Command # /
LINOUT::EXP	0
	  ASCIZ ./.



IFN CCLSW,<
IFN TEMPC,<
T.HEAD::SIXBIT /EDS   />
T.IOWD::XWD 0,CMDBUF-1
	EXP 0
>

; Control block for control-C trapping

CNCBLK::4,,0
	0,,1B34
	0
	0
CNCLOK::-1		; Interlock for re-entrant handling
INDDVI::BLOCK	3

; Semi-constant data to save on /CCL starts here

CCLSVB::		; Place to start dumping

IFN %UACCL,<
DVNCCL==:.VNCCL			; So always get right value in SOSINI
CCLVER::EXP	.VNCCL
>
IFN EXTEND,<
LSBUFN::LSNUM
LSPTR::	
	I==0
REPEAT LSNUM,< POINT 7,LSBUF+<SRBLG/5+2>*I
	I==I+1
>
LSPTT::	
	I==0
REPEAT LSNUM,< EXP LSPNT+SRNUM*I
	I==I+1
>
>

; Stuff for justification

PMAR::	1	; Paragraph indentation
LMAR::	1	; Normal indentation (left margin)
RMAR::	; Right margin
MAXL::	EXP	^D64	; Otherwise known as max line length
MAXLN::	<ASCII /99999/>!1	; Maximum line number on a page
WTBL::	.+1		; For now, all characters have width 1
	 1
JFLOP::	1	; Flipflop for inserting blanks on l or r
PAGESZ::EXP	PGSZ
PLINES::20	; Default value for p cmd
CTLWTH::2	; Default control print width


;  The following control the automatic window sizing function
;  when the window size is to be computed base on file size.

WINRAT::EXP	4	; File size to window ratio
WINMIN::EXP	2000	; Minimum window size
WINMAX::EXP	60000	; Maximum window size

REFDLY::EXP	HB.RTC!^D500	;DEFAULT /REFDLY VALUE
BAUD::	EXP	^D1200		;DEFAULT /BAUD VALUE
IFN RENTSW,< DEPHASE >
DATAE==:.-1
; Rest is random variables and buffers

IFN RENTSW,< RELOC DATABL+<DATAE-DATAB>+1 >


; Stuff that must be saved for /CCL must come first

ZEROB==:.

BUFNUM::BLOCK	1	; Number of buffers to use for unsequenced input
WINDOW::BLOCK	1	; Actual window size

SVINDV::BLOCK	1	; Place to save input device
SVOUDV::BLOCK	1	; Place to save output device

SVFL::	BLOCK	1	; Place to save flag register
SVFL2::	BLOCK	1	; Place to save second flag register
; ---
.UNSQF::BLOCK	1	;\Keep        Permanent unsequence flag
.BAKF::	BLOCK	1	;/Together    Permanent BAK file flag
; ---
IFN EXTEND,<
LSHIPG::BLOCK	1
LSHILN::BLOCK	1
LSCNT::	BLOCK	1
LSPG::	BLOCK	1
LSBUF::	BLOCK	<SRBLG/5+2>*LSNUM
LSPNT::	BLOCK	SRNUM*LSNUM
>
; ---
CLN::	BLOCK	1	;\Keep
CPGL::	BLOCK	1	;/Together
LSLOLN::BLOCK	1	;\Last value setup of LOLN, LOPG
LSLOPG::BLOCK	1	;/
CURINS::BLOCK	1	;\Last line insert with the I command
CURINP::BLOCK	1	;/Last page inserted with the I command
; ---
INCR::	BLOCK	1
CPG::	BLOCK	1

AUTALT::BLOCK	1		; Allow special Insert/Alter Mode

EXACTF::BLOCK	1		; IF non-zero then F and S searches
				; exact
AEXACF::BLOCK	1		; If non-zero then Alter searches exact

TELFLG::BLOCK	1		; Tell [str:file.ext[path]] on exit
QZBAKF::BLOCK	1		; -1 use Q?? and Z?? type backup files
INFFLG::BLOCK	1		; -1 give lines deleted message on D
NOAINF::BLOCK	1		; Non-zero, skip auto insert on create.
DELETF::BLOCK	1		; -1 if /DELETE, 0 if /NODELETE

CCEXIT::BLOCK	1		; -1 if user wants out on ^C

CCLFLG::BLOCK	1		; User interested in CCL
AFSBUF::BLOCK	4		; Buffer for F command string

; ---
	BLOCK	-XRBBIG		; SOS part of block
NAMEO::	BLOCK	.RBBIG+1	; Start of extended ENTER block
; ---

STRCNT::BLOCK	1		; Count of structures seen
				; Really a flag since only > 0 counts
STRNAM::BLOCK	3
OUTLEB::BLOCK	1		; Last Lookup Enter block used by SOSEND

STRSBN::BLOCK	2
ARBBUF::BLOCK	MXWPL*2+1
ARBCNT::BLOCK	1
; ---
SRHILN::BLOCK	1	;\Keep
SRHIPG::BLOCK	1	;/Together
; ---
SRCNT::	BLOCK	1
SRBUF::	BLOCK	SRBLG/5+2
SRPG::	BLOCK	1
SRPNT::	BLOCK	SRNUM

CODEBF::BLOCK	4*SRNUM+2

R1BUF::	BLOCK	SRBLG/5+2
R2BUF::	BLOCK	SRBLG/5+2
; ---
RPHILN::BLOCK	1	;\Keep
RPHIPG::BLOCK	1	;/Together
; ---
R1PNT::	BLOCK	SRNUM
R2PNT::	BLOCK	SRNUM
CCNT::	BLOCK	1
RSTRCT::BLOCK	1

CCLENT::BLOCK	1		; Did we do CCL entry
; ---
ORGDEV::BLOCK	1	; \
ORGPTH::BLOCK	1	; |
ORGNAM::BLOCK	1	; | original file name (keep in order)
ORGEXT::BLOCK	2	; /
; ---
OUTPTH::BLOCK	1	; \
OUTNAM::BLOCK	1	; | Output file name (Keep in order)
OUTEXT::BLOCK	2	; /
; ---
	BLOCK	-XRBBIG		; SOS part of the block
NAMEI::	BLOCK	.RBBIG+1	; Start of extended LOOKUP block
; ---

TECFST::BLOCK	1		; First number to use when sequencing a
				; TECO file
TECINC::BLOCK	1		; Increment to use on such files

SSAVEN::BLOCK	1
SISAVN::BLOCK	1
PZBEG==:.
PNAMI::	BLOCK	3
IPATH:: BLOCK	.PTMAX
IFN CRYPSW,<
ICODE::BLOCK	1	; Permanent encryption code
>
PNAMO::	BLOCK	3
OPATH::	BLOCK	.PTMAX
IFN CRYPSW,<
OCODE::BLOCK	1
CODBUF::BLOCK	5
>
PZEND==:.-1
PRTCOD::BLOCK	1	; Protection to be used for final output file
CRLFSW::BLOCK	1	; Value of /CRLF:n

CCLSVE::		; Where to stop dumping
CCLSVL=:CCLSVE-CCLSVB
MCLSVL=:-CCLSVL		; Length for IOWD
MYPPN::	BLOCK	1	; This is the users PPN
CAUNIT::BLOCK	1	; Units of core allocation. (Pages or K)
MYUDX:: BLOCK	1	; My terminal UDX
TABINI:: BLOCK	1	; Initial setting of TTY TAB
TABCUR:: BLOCK	1	; Current setting of TTY TAB
SVCRLF::BLOCK	1	; Save value of CRLF during alter
UNSEQF::BLOCK	1	;-1 unsequence the file, 0 use UNSQIF, 1 sequenc
PMIFLG::BLOCK	1	; -1=PAGE MARK ADDED TO PREVENT WAR
UNPAGF::BLOCK	1	; FLAG TO STRIP PAGE MARKS AND SEQUENCE NUMBERS
XFLAG::	BLOCK	1	;-1 if /X given
UNSQIF::BLOCK	1	; 0=don't know, -1 = unsequenced, 1 = sequenced
BAKF::	BLOCK	1	; 0 = nobackup , -1 = bak, 1 for old
BAKF1::	BLOCK	1	; 0 = no backup yet, -1 = we already did it once
NORNM::	BLOCK	1	; Input file must not be deleted so can't use 
			; rename
ENDFLG::BLOCK	1	; -1 if we are trying to get a new file spec
; ---
PNTNMI::BLOCK	1	;\Keep     Pointer to IN channel lookup block
PNTNMO::BLOCK	1	;/Together Pointer to OUT channel lookup block
; ---
SVWD::	BLOCK	1
SVWD2::	BLOCK	1
TMPT1::	BLOCK	1
BASICF::BLOCK	1
RPGSW::	BLOCK	1
TMPNAM::BLOCK	1
TMPDEV::BLOCK	1
TMPCOD::BLOCK	1	; Temporary encryption key
ERSW::	BLOCK	1	; Flag to say doing an edit restart
			; 0 Means normal start
			; +1 Means read ESF file
			; -1 Means doing an ER
			; -2 Means doing a CX second file initialization
EDSW::	BLOCK	1	; -1 means delete input file on exit
QUITSW::BLOCK	1	; We are giving up -- delete temps, go
EWNFNF::BLOCK	1	; -1 if filename given on E or W command
; ---
ERDEV::	BLOCK	1	;\ Keep      Device to use next time
ERPPN::	BLOCK	1	; |          PPN to use next time
ERFNAM::BLOCK	1	; |          File name to use next time
EREXT::	BLOCK	2	;/ Together  Extension to use next time
; ---
NEWBLK==:.-1
NEWPTH::BLOCK	1
NEWNAM::BLOCK	1
NEWEXT::BLOCK	3
NEWDEV::BLOCK	1

NPATH::	BLOCK	.PTMAX		; Place to store the path
SVJFF2::BLOCK	1	; Nominal value of .JBFF at command start
BUFFIR::BLOCK	1	; Points to first word of low buffer
BUFLAS::BLOCK	1	; Points to word following last word in high buf
BUFLIM::BLOCK	1	; Points to highest permissible value of BUFLAS
BUFHSZ::BLOCK	1	; Contains (.BUFLIM-.BUFFIR)/2
BUFSAI::BLOCK	1	; Short advance increment
BUFBDY::BLOCK	1	; Low order 7 bits or BUFFIR.  Used to detect
BUFLOW::BLOCK	1	; Same as BUFFIR with -BLKSIZ in left half
			; block boundaries
BUFBLL::BLOCK	1	; Last word in buffer known to contain a line
			; sequence bit.
REMSIZ::BLOCK	1	; Count of words remaining in the input file
			; (unread)
OUTSIZ::BLOCK	1	; Count of words written to the output file
			; (Output actually performed)
RDTPDP::BLOCK	1	; ReaD Teco Push Down List pointer
RTIPDP::BLOCK	1	; Read Teco Initial Push Down Pointer
RDTPDL::BLOCK	RTPLSZ+2; Push down list used by Read Teco Coroutine
RDTBFP::BLOCK	1	; XWD fwa,lwa+1 of read TECO buffer ring.
			; Allows return of the core if lwa+1 is top
			; or core when EOF is reached.

TECLIN::BLOCK	1	; Contains the line number to be used next
			; when sequencing a file

SSW::	BLOCK	1
RSW::	BLOCK	1
DFXSW::	BLOCK	1	; -1 if READNM set a default extension
SVDFX::	BLOCK	1	; Default extension for create after ER command
EDNAM::	BLOCK	1	; nnnSOS, where nnn is the current job number
OLDLIN::BLOCK	1	; Previous line seen by input sequence checker
SAVEN::	BLOCK	1	; Current /SAVE count
ISAVEN::BLOCK	1	; Current /ISAVE count
CHGCNT::BLOCK	1	; This is really a 3-way switch
			; -1 means just did a save
			; 0 means no changes this pass
			; GTR 0 means changes this pass.  All non-zero
			; values force SOSBUF to wrap file around.
TOTCHG::BLOCK	1	; RH is GTR 0 if changes on previous passes
			; Bit 0 is set to 1 if no changes since last
			; save.  This bit is cleared by SOSBUF.
ALTSN::	BLOCK	1	; -1 =  altmode was typed on input, else 0
FFFLAG::BLOCK	1	; 1 if empty line with FF seen, -1 if non-empty
			; line with form feed seen.  Set by RDLIN.
ALTINC::BLOCK	1	; Increment used when user break a line in Alter
INIFLG::BLOCK	1	; Allow initial only set commands
ALTFLG::BLOCK	1
CASEBT::BLOCK	1
BGPG::	BLOCK	1	; Largest page in file, (or huge value)
			; value is correct if BGSN flag is set
ACCUM::	BLOCK	1	; SCAN returns identifiers here
SVT1E::	BLOCK	1	; UUO trapping save T1 here initially
SVERN::	BLOCK	1	; and save error number here (xERROR UUO's)
SAVCHR::BLOCK	1	; a lookahead character for TTY input
TEMINC::BLOCK	1	; Temporary increment (Set with ";" by I and R)
REINC::	BLOCK	1	; Increment used by N command
INCST::	BLOCK	1	; Next line number for N command to use
ALTCNT::BLOCK	1	; Count of characters on left of Alter cursor
INOCNT::BLOCK	1	; Rep count for O in alter mode
INOCHR::BLOCK	1	; Chacracter being inserted with O cmd
IGNCH::	BLOCK	1	; Character routine for alter insert
ALTWPR::BLOCK	1	; Processing routine for word commands
XCMDF::	BLOCK	1	;-1 if X-command, 0 if Alter, +1 to exit
			; to insert routine
SUPSNF::BLOCK	1	;-1, don't type SN this time
PRVSIZ::BLOCK	1	; Print size of line being altered
CHGLNF::BLOCK	1	;-1 if this alter command can change print width
V52SPF::BLOCK	1	;-1 to suppress output 
DELBAK::BLOCK	1	;-1 if deleting backward or inserting
LOGPG::	BLOCK	1
LSTCNT::BLOCK	1
SVCCNT::BLOCK	1
SAVC::	BLOCK	1
DELCNT::BLOCK	1	; Number of lines deleted
FDELLN::BLOCK	1	; First line deleted (D and R)
LDELLN::BLOCK	1	; Last line deleted (D and R)
IFN LSTSW,<		; [211]
LOBUF::	BLOCK	3	; Lineprinter buffer header for L command
HLPBUF::BLOCK	3	; Input buffer head for device LPT, for HELP.
PGHD::	BLOCK	^D12	; place to stash header
PGHDE=:PGHD+^D11	; point to end of header
>
OBUF::	BLOCK	4	; Disk output
IBUF::	BLOCK	4	; Dsk input
; ---
IBUF1:	BLOCK	4	; This set of buffer headers are allocated
OBUF1:	BLOCK	4	; for each of the standard I/O channels.
IBUF2:	BLOCK	4	; They are not global to discourage non-
OBUF2:	BLOCK	4	; standard access.  The correct way to reach
IBUF3:	BLOCK	4	; these blocks is indirectly through CHNTAB.
OBUF3:	BLOCK	4
; ---
AUXFIL::BLOCK	1	; Set to -1 if second temp file is open, else 0
OPNOUF::BLOCK	1	; Set to -1 if .TEM file was opened.
PDL::	BLOCK	PDLSIZ+1	; Pushdown list
P.TEXT::BLOCK	1
CMDBUF::; COMMAND BUFFER ; Used to store the rescan line at startup
LIBUF::	BLOCK	MXWPL+2	; Line input buffer
CRSX::	BLOCK	1	; Place for CR's
LIBUF2::BLOCK	MXWPL+2	; Second working line buffer, used by J commands
LSTBLK::BLOCK	6	; LOOKUP/ENTER block for listing
PARCNT::BLOCK	1
RPPG::	BLOCK	1
RPCNT::	BLOCK	1
FNDFLG::BLOCK	1
IFN JUSTSW,<
OCNT1::	BLOCK	1
OPTR::	BLOCK	1
LINL::	BLOCK	1
LWRD::	BLOCK	1
WRDL::	BLOCK	1
TPNT::	BLOCK	1
ELIN::	BLOCK	1
TCHR::	BLOCK	1
WCNT::	BLOCK	1
BPW::	BLOCK	1
REM::	BLOCK	1
BLIN::	BLOCK	1
INDNT::	BLOCK	1
>
SVOCIN::BLOCK	1
OPTION::BLOCK	1
OPTBHD::BLOCK	3
INDEXT::BLOCK	3
GIFEXT::BLOCK	1		; Explicitly typed extension on ind file
GIFDEV::BLOCK	2		; Explicitly typed device on ind file
SVALTP::BLOCK	1
DPG::	BLOCK	1
SVINC::	BLOCK	1
SVCNT::	BLOCK	1
OCNT::	BLOCK	1
NCNT::	BLOCK	1
SRCALP::BLOCK	1
SVPBTS::BLOCK	1	; Protection of current input file
LINEW::	BLOCK	1	; TTY line width, from the TRMOP. monitor call
WRPCNT::BLOCK	1	; Count of times that we wrapped around
TTALTF::BLOCK	1	; Zero if user has TTY ALTMODE set
NULFIL::BLOCK	4	; Null file for DELETE macro renames
UUONOM::BLOCK	1	; Flag to UUO to silence error messages
			; -1 = silent, all other values mean issue
FTYPE::	BLOCK	1	; Holds address of possible error message
STOPGF::BLOCK	1	; Flag meaning stop at page boundary if NEQ 0
CMDPMT::BLOCK	1	; Current command prompt
PMTSTR::BLOCK	1	; Current prompt pointer
FNDPMT::BLOCK	1	; Prompt for next search string
FRCPAG::BLOCK	1	; Page number if implied by special symbols %, #
			; and ".".  Used only by scanner.
ZEROE==:.-1
SAVPDP::BLOCK	1	;***Obsolete
ALTFNM::BLOCK	.RBBIG+1; Alternate filename during copy
APATH::	BLOCK	.PTMAX
SVPATH::BLOCK	.PTMAX
LPPATH::BLOCK	.PTMAX
; ---
HILN::	BLOCK	1	;\Keep
HIPG::	BLOCK	1	;/Together
; ---
LOLN::	BLOCK	1	;\Keep
LOPG::	BLOCK	1	;/Together
; ---
CXFCOR::BLOCK	1	; Highest word in use by this editing segment
CXFPDP::BLOCK	1	; Current pushdown list pointer for this segment
			; Also used to determine if there is a co-edit
			; in progress. If zero, no co-file; if negative,
			; good co-file.  If GTR 0, bad co-file.
CXFPTR::BLOCK	1	; BLT word used to save the segment
; ---
LSGEND==.
;
;---------Variable from here on are shared between co-files------------
;
CXFMNE::BLOCK	1	; Set to -1 if E command is illegal
			; Set to +1 to allow E but disallow further
			; co-edits after fatal error in first file.
CXSUPF::BLOCK	1	; Set to -1 to suppress "Now editing..." msg
;
;---	; Following data is used by the C and T commands
COCOPY::BLOCK	1	; Copy/Transfer from co-file
ISCOP::	BLOCK	1	; Copy/Transfer in progress
TRANFL::BLOCK	1	; We are doing a transfer
SVPT::	BLOCK	1
BUFSAV::BLOCK	1	; Code buffer for F & S commands
BOTLIN::BLOCK	1	; First line copied, -1 if BOF, PGMK if pagemark
FDELPG::BLOCK	1	; First page deleted (D and R commands)
PGDELS::BLOCK	1	; number of pages to be deleted
STARTD::BLOCK	1	; Start of copied text in high buffer
ENDD::	BLOCK	1	; End of copied text in high buffer
TRANST::BLOCK	1	; Page on which deletion begins
PGINSD::BLOCK	1	; Flag: -1 if page was inserted to avoid war
DESTLN::BLOCK	1	; Destination line for Copy or Transfer
DESTPG::BLOCK	1	; Destination page for Copy or Transfer
FINCR::	BLOCK	1	; First increment (before a page mark)
SINCR::	BLOCK	1	; Second increment (after a page mark)
SVLNUM::BLOCK	1	; 
LSTPG::	BLOCK	1	; 
LSTLN::	BLOCK	1
SVJRL::	BLOCK	1	; .JBREL before copy command began
COPDL::	BLOCK	1	; Special PDL pointer during C=filename
NLIN1::	BLOCK	1
NLIN2::	BLOCK	1
DESTN::	BLOCK	1
START2::BLOCK	1
; ---	; Following data is used by the TTY input handler
WFLG::	BLOCK	1	; ^W state:  -1 if at start of word erase
ERSCTW::BLOCK	1	; -1 If we need to erase "^W" on a display
			;	     0 if have seen first nonblank
			;	     .GE. 1 if never started or complete
LIMBO::	BLOCK	1	; Limbo char after bell
CHIN::	BLOCK	1	; Input pntr
SVCCIN::BLOCK	1	; Saved input routine for @ cmds
SVPCIN::BLOCK	1	; Saved input routine for parse
CTIBUF::BLOCK	3	; Terminal input buffer header
TTYBA::	BLOCK	1	; Holds address of monitor-generated tty buffers
TTYBE::	BLOCK	1	; Holds address of first free word after above
TIBUF::	BLOCK	3	; Intermediate terminal input buffer header
TBUF::	BLOCK	LINSIZ/5+1 ; Intermediate terminal input buffer
TTOBUF::BLOCK	LINSIZ/5+1
TTOCNT::BLOCK	1	; Output cntr
TTOPNT::BLOCK	1	; Output pntr
SVTSTS::BLOCK	1	; Place to save current TTY status
COMFLF::BLOCK	1	; -1 if reading from a command file, else 0.
INDFIL::BLOCK	6
COMBUF::BLOCK	203
CMPATH::BLOCK	.PTMAX		; For indirect file path

; Start of the 2nd half of the CCL save area

RPGR::	BLOCK	6
RNPATH::BLOCK	.PTMAX
VT52FL::BLOCK	1	; Fancy display flag
DPYFLG::BLOCK	1	; -1 if display terminal
BACCHR::BLOCK	1	; BACKSPACE CHAR (USUALLY ^H)
NEWALT::BLOCK	1	; -1 IF NEW ALTER MODE
NEWCMD::BLOCK	1	; -1 IF NEW COMMAND MODE
TSPEED::BLOCK	1	; TERMINAL TRANSMIT SPEED
TERMNM::BLOCK 1	; TERMINAL TYPE INDEX
CMFFLG::BLOCK	1		
COMFRP::BLOCK	1
XINSRT::BLOCK	1	; -1 if X command should insert new lines 
EXPFLG::BLOCK	1	; -1 if /EXPERT
QMDFLG::BLOCK	1	; -1 if ' is special on input (all chars)
			; +1 if ' is special on input for non-letters.

; Function block for special display routines (/VT52 and /VT05)

TMFFIR::		; First function
TMFCR::	BLOCK	1	; FUNCTION TO <CR> WITH FILL
TMFCLR::BLOCK	1	; Function to clear screen and home
TMFCTE::BLOCK	1	; Function to clear to end of screen
TMFCLN::BLOCK	1	; Function to clear to end of line
TMFCUP::BLOCK	1	; Function to move cursor up one line
TMFCUR::BLOCK	1	; FUNCTION TO DO DIRECT CURSOR ADDRESSING
			; #CHARS,,ROUTINE (ZERO=TERMINAL CANT DO THIS)
			;WHERE # CHARS=# CHARACTERS TO DIRECT CURSOR
			;ADDRESS (TO SEE IF SPACES FASTER) AND ROUTINE
			;IS CALLED WITH T1=NEW COLUMN TO GO TO
TMFLAS==:.-1		; Last function
CCLS2L==.-RPGR		; End second half of CCL save area
COMCNT::BLOCK	2
INDBUF::BLOCK	3
IMPEND==:.-1
LSGLEN==:LSGEND-DATABL	; Length of the low segment
MLSGLN==:-LSGLEN
IFN RENTSW,<RELOC>	; Into high segment for literals
	LIT		; Generate literals
IFN RENTSW,<RELOC>	; Back to low segment
;  Comment--this is an  alternate  initial  start  address  to  get
;  around  a  bug  in  LINK-10.   It  deletes  the  symbol table by
;  changing the JOBDAT parameters so that the SAVE command will not
;  save it.  This is done because LINK will not a generate a symbol
;  file without leaving the  symbols  in  core.   To  perform  this
;  chicanery,  use  the /START:SSTART/EXECUTE switches when linking
;  SOS.  The normal start address, SOS, will be  installed  by  the
;  code that follows.

REPEAT 0,<			;**TEMP**
IFN FTVDDT,<			; Useless on non-VM systems
SSTART::
	SETZM	.JBSYM##
	HRLZI	T1,SSTART	; Point to end of data
	HRRI	T1,SOS##	; Point to new start address
	SETZB	T2,T3
	HRLM	T2,.JBCOR##
	SETUWP	T2,
	  HALT	.+1
	HRLM	T3,400000+.JBHCR##
	MOVEM	T1,.JBSA##	; Denote end of data region
	MOVEM	T1,400000	; in both copies of .JBSA
	MOVSI	T1,'SOS'
	SETNAM	T1,
	OUTSTR	[ASCIZ/[Type (N)SSAVE to save the program]
/]
	EXIT			; This does a reset


>
>;END REPEAT			;**TEMP**
	END