Google
 

Trailing-Edge - PDP-10 Archives - cuspmar86binsrc_2of2_bb-fp63a-sb - 10,7/kdpldr/kdpldr.doc
There are 3 other files named kdpldr.doc in the archive. Click here to see a list.


KDPLDR.DOC -- V1(4)
June 1979






























COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1978,1979,1986.
ALL RIGHTS RESERVED.


THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND  COPIED
ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH  LICENSE AND WITH THE
INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR  ANY  OTHER
COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE  SOFTWARE  IS  HEREBY
TRANSFERRED.

THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE  WITHOUT  NOTICE
AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
CORPORATION.

DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
KDP1.DOC                                                        Page 2


KDPLDR.DOC -- V1(4)
June 1979



1.0  SUMMARY

KDPLDR is a program designed to perform the following functions.

        . Start,  stop  and  master-clear  KMC-11   synchronous   line
          controllers  attached  to  KS10  processors  via KS10 UNIBUS
          adapters.
        . Load and verify the KMC-11 microcode.
        . Initialize or halt DDCMP on  the  DUP-11  synchronous  lines
          controlled by the KMC-11.

KDPLDR will run only on KS10 processors under  a  7.00  or  subsequent
monitor.



2.0  EXTERNAL CHANGES

As KDPLDR is an entirely new program, there are no  "changes".   Refer
to the HLP file for operating instructions.



3.0  KNOWN BUGS AND DEFICIENCIES

None.



4.0  INSTALLATION INSTRUCTIONS

A KDPLDR distribution contains the following files.

          KDPLDR.DOC          ;This .DOC file
          KDPLDR.HLP          ;The "help" file
          KDPLDR.MAC          ;The sources for KDPLDR
          KDPLDR.CTL          ;A .CTL file to build KDPLDR
          KDPLDR.EXE          ;A runnable KDPLDR

KDPLDR should only be  installed  on  a  KS10  based  TOPS-10  system.
Installation consists of the following steps.

        . Copy KDPLDR.EXE to SYS:
        . Copy KDPLDR.HLP to HLP:
        . Add the following lines to the OPR.ATO file.

               ;SLOG
               :DEF KDP=
               KDP-R KDPLDR
               KDP-/AUTO/RUN:LOGOUT
KDP1.DOC                                                        Page 3


5.0  INTERNAL CHANGES

Not applicable.



6.0  SUGGESTIONS

None.



[End of KDP1.DOC]