Google
 

Trailing-Edge - PDP-10 Archives - cuspmar86binsrc_2of2_bb-fp63a-sb - 10,7/galaxy/pulsar/plrdsp.mac
There are 3 other files named plrdsp.mac in the archive. Click here to see a list.
	TITLE	PLRDSP - Display routines for PULSAR
	SUBTTL	D Cornelius 3-Aug-83

;
;
;        COPYRIGHT (c) 1975,1976,1977,1978,1979,1980,1981,1982,
;			 1983,1984,1985,1986
;                    DIGITAL EQUIPMENT CORPORATION
;			 ALL RIGHTS RESERVED.
;
;     THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED
;     AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
;     AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS
;     SOFTWARE  OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
;     OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON.  NO  TITLE  TO
;     AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
;     THE INFORMATION  IN  THIS  SOFTWARE  IS  SUBJECT  TO  CHANGE
;     WITHOUT  NOTICE  AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
;     BY DIGITAL EQUIPMENT CORPORATION.
;
;     DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
;     OF  ITS  SOFTWARE  ON  EQUIPMENT  WHICH  IS  NOT SUPPLIED BY
;     DIGITAL.

	SEARCH	GLXMAC
	SEARCH	PLRMAC
	SEARCH	ORNMAC			;FOR WTO, ACK SYMBOLS
	PROLOG(PLRDSP)

;A MACRO to easily type out straight ASCII text to
; the message page
;Clobbers S1
	DEFINE	$ASCII(TEXT,%X),<
	SKIPA	S1,[[ASCIZ@TEXT@]]
	JRST	%X
	PUSHJ	P,P$TEXT
%X:
	.XCREF	%X
	SUPPRESS %X
>;END DEFINE $ASCII
	SUBTTL	P$SLST - SHOW SYSTEM LISTS

;This is the routine which will display the system
; lists following an OPR command SHOW SYSTEM-LISTS
;Call -
;	S1/	flags, DS.SSL,DS.CDL,DS.ASL, to display
;			the corresponding  lists
;	M/	Adrs of incoming message
;Returns -
;	$ACK to the OPR who asked

P$SLST::
	$SAVE	<P1,P2>			;Some work space
	MOVE	P1,S1			;Save the flags
	$CALL	M%GPAG			;Get a display page
	MOVE	P2,S1			;Save its adrs
	PUSHJ	P,DSPINI		;Init the text buffer
	PUSHJ	P,P$CRLF		;A BLANK LINE TO START
	TXNE	P1,DS.CDL		;Want to show crash dump list?
	PUSHJ	P,P$SCDL		;Yes, put it in
	TXNE	P1,DS.ASL		;Want to see the active swap list?
	PUSHJ	P,P$SASL		;Yes, add that on
	TXNE	P1,DS.SSL		;Want to see system search list?
	PUSHJ	P,P$SSSL		;Yes, add that on, too
	SETZ	S1,			;Done, get a null
	IDPB	S1,DSPPTR		;Terminate the text
	$ACK	(<System lists>,<^T/0(P2)/>,,.MSCOD(M),$WTFLG(WT.NFO))
	MOVE	S1,P2			;Get back message page adrs
	$CALL	M%RPAG			;Return the space
	$RETT
	SUBTTL	P$SCDL - ROUTINE TO DUMP THE CRASH DUMP LIST

;CALL -
;	Setup a pointer in DSPPTR
;RETURNS-
;	Text into the message, and updated pointer

	MAXSTR==^D36			;Max # of file structures
					; that can be spinning at once

P$SCDL:
	$SAVE	<P1,P2,P3>
	$ASCII	(<Crash Dump List:	>)
	MOVEI	S1,MAXSTR		;Size neede for table
	$CALL	M%GMEM			;Get the space
	MOVE	P1,S2			;Save addr of space
	SETZ	P2,			;Initially- first str
SCDL.1:	SYSSTR	P2,			;Get next str in sys list
	 JRST	SCDL.2			;Error, say end of list
	JUMPE	P2,SCDL.2		;Quit when monitor returns 0
	MOVE	S1,P2			;Copy the str name
	PUSHJ	P,D$PCDL##		;Find its position in crash dump list
	JUMPF	SCDL.1			;Not in there, try the next
	CAIL	S1,MAXSTR		;Is it in range 0 to N-1?
	JRST	[$WTO(<Structure ^W/P2/:>,<Claims to be in position ^D/S1/ in crash dump list
but MAXSTR = ^D/[MAXSTR]/>,,$WTFLG(WT.SJI))
		JRST	SCDL.1]		;Try next str
	ADDI	S1,0(P1)		;Aim at table entry
	SKIPE	0(S1)			;Anyone there now?
	$WTO	(<Structure ^W/P2/:>,<Occupies same position in crash dump list as structure ^W/0(S1)/>,,$WTFLG(WT.SJI))
	MOVEM	P2,0(S1)		;Put this one in
	JRST	SCDL.1			;Try the next one

SCDL.2:	MOVSI	S2,-MAXSTR		;Make count in LH
	HRRI	S2,0(P1)		;And addr in RH
	SETO	P3,			;Set 'first time' flag
SCDL.3:	SKIPN	S1,0(S2)		;Is there a str at this position?
	JRST	SCDL.4			;No, try next
	SKIPN	P3			;First time?
	PUSHJ	P,P$DLIM		;No, delimit the last one
	PUSHJ	P,P$STRC		;Print the str name
	SETZ	P3,			;Clear the flag
SCDL.4:	AOBJN	S2,SCDL.3		;Check each slot
	SKIPE	P3			;Anything in at all?
	$ASCII	(<Empty>)		;Nope
	MOVEI	S1,MAXSTR		;Size of space we got
	MOVE	S2,P1			;Addr of space
	$CALL	M%RMEM			;Return the space
	PJRST	P$CRLF			;Finish line, return
	SUBTTL	P$SSSL - DISPLAY SYSTEM SEARCH LIST

;CALL -
;	Setup a pointer in DSPPTR
;RETURNS -
;	Text of the system search list via the pointer

P$SSSL:
	$ASCII	(<System Search List:	>)
	SETZ	S1,			;Indicate job 0
	PUSHJ	P,D$RDSL##		;Get the search list
	JUMPF	[$ASCII (<Unavailable>)
		PJRST	P$CRLF]		;Sigh
	MOVEI	S2,.FSDSO(S1)		;Aim at the first block
	SKIPN	S1,.DFJNM(S2)		;Is it empty?
	JRST	[$ASCII	(<Empty>)
		PJRST	P$CRLF]		;Strange, but true
SSSL.1:	PUSHJ	P,P$UNIT		;Put that in the message
	ADDI	S2,.DFJBL		;Step to next entry
	SKIPN	S1,.DFJNM(S2)		;Is there another?
	JRST	SSSL.2			;No
	PUSHJ	P,P$DLIM		;Yes, delimit it
	JRST	SSSL.1			;Do the rest

SSSL.2:	PJRST	P$CRLF			;Finish the line
	SUBTTL	P$SASL - SHOW THE ACTIVE SWAPPING LIST

;This routine finds out how many entries the Monitor's swap
; table has.  It gets that much space, and checks each disk
; drive in the system for holding a place in the ASL
; each one is entered at its appropriate position in out table
; Then the table is dumped out

P$SASL:
	$SAVE	<P1,P2,P3>		;Some work space
	$ASCII	(<Active Swapping List:	>)
	MOVX	P1,%LDMSL		;Level-D SWPMAX
	GETTAB	P1,			;Hom many are possible?
	 MOVEI	P1,^D8			;Default is 8
	MOVE	S1,P1			;Copy it over
	PUSHJ	P,M%GMEM		;Get that much space
	MOVE	P2,S2			;Save pointer to it
	SETZ	P3,			;Start with the first unit
SASL.1:	SYSPHY	P3,			;Get the next disk unit
	 JRST	SASL.2			;;Error??? say no more
	JUMPE	P3,SASL.2		;Quit when list exhausts
	MOVE	S1,P3			;Copy the unit name
	PUSHJ	P,D$PASL##		;Find out where it lives
	JUMPF	SASL.1			;Not in,, try the next
	CAML	S1,P1			;Reasonable position??
	JRST	[$WTO(<Unit ^W/P3/:>,<Claims to be in position ^O/S1/in Active Swapping List
but SWAPMAX = ^O/P1/>,,$WTFLG(WT.SJI))
		JRST	SASL.1]		;And leave it out of our table
	ADDI	S1,0(P2)		;Aim at correct slot
	SKIPE	0(S1)			;Is someone already there?
	$WTO	(<Unit ^W/P3/:>,<Occupies same position in Active Swapping List as Unit ^W/0(S1)/:>,,$WTFLG(WT.SJI))
	MOVEM	P3,0(S1)		;Move over, you impostor
	JRST	SASL.1			;Try the next

SASL.2:	MOVN	S2,P1			;Get neg # of table slots
	MOVSS	S2			;To LH
	HRRI	S2,0(P2)		;Aim at our table
	SETO	P3,			;Note we haven't printed any yet
SASL.3:	SKIPN	S1,0(S2)		;Is there one here?
	JRST	SASL.4			;Nope, try next slot
	SKIPN	P3			;Don't delimit first attempt
	PUSHJ	P,P$DLIM		;add the delimiter
	PUSHJ	P,P$UNIT		;Add that
	SETZ	P3,			;Note we've been here
SASL.4:	AOBJN	S2,SASL.3		;Check all of our table
	SKIPE	P3			;Printed anything?
	$ASCII	(<Empty>)		;No, say so
	DMOVE	S1,P1			;Get back length,, addrs of space
	$CALL	M%RMEM			;Returns the space
	PJRST	P$CRLF			;Tie off the len, return
	SUBTTL	Text output routines

;Make a new line in the buffer
P$CRLF:	$SAVE	<S1>
	MOVEI	S1,.CHCRT		;Get a carriage return
	PUSHJ	P,DSPDPB		;Dump it into the message
	MOVEI	S1,.CHLFD		;Get a line feed
	PJRST	DSPDPB			;Dump it, and return

;Add a unit name to the message
;Call -
;	S1/	SIXBIT 	unit name
P$STRC:
P$UNIT:	$TEXT	(DSPDPB,<^W/S1/:^A>)	;Put out the unit
	$RETT				;And return

;Delimit unit or structure names
P$DLIM:	$SAVE	<S1>			;Save our work AC
	MOVEI	S1,","			;Get a comma
	PUSHJ	P,DSPDPB		;Add it
	MOVEI	S1," "			;And a space
	PJRST	DSPDPB			;Add it, and return

;A routine (called by the $ASCII macro) to put
; straight text into the output page
; N.B. No CRLF is added to the text passed
;Call -
;	S1/	Addr of text (ASCIZ)
P$TEXT:	$TEXT	(DSPDPB,<^T/0(S1)/^A>)
	$RETT

;Routine to initialize the output routine
;Call -
;	S1/	Adrs of buffer page
DSPINI:	HRLI	S1,(POINT 7,)		;Make a pointer to the page
	MOVEM	S1,DSPPTR		;Save in $TEXT output pointer
	$RETT				;Return

;A $TEXT output co-routine
DSPDPB:	IDPB	S1,DSPPTR		;Dump the character
	$RETT				;Return

DSPPTR:	BLOCK	1			;Space for a pointer
	END