Google
 

Trailing-Edge - PDP-10 Archives - cuspmar86binsrc_1of2_bb-x128b-sb - 10,7/declar/declar.mac
There are 7 other files named declar.mac in the archive. Click here to see a list.
	TITLE	DECLARE		;Define user defined commands
	SUBTTL	Tarl Neustaedter/RCB	17 Sep 85

;COPYRIGHT (c) 1984,1986 BY
;DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
;ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY  OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF THE  SOFTWARE  IS  HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT  NOTICE
;AND  SHOULD  NOT  BE  CONSTRUED  AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY  OF  ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.

	SEARCH	JOBDAT,MACTEN,SCNMAC,UUOSYM ;Universals
	TWOSEG			;Put code in sharable hiseg
	RELOC	400000		;Starting now

ASCIZ |
COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1984,1986.
ALL RIGHTS RESERVED.
|

	.REQUE	REL:SCAN,REL:HELPER
	.TEXT	"/SYMSEG:HIGH/LOCALS"

	DCLWHO==0
	DCLVER==1
	DCLMIN==0
	DCLEDT==12

.ORG	.JBVER
	BYTE (3)DCLWHO(9)DCLVER(6)DCLMIN(18)DCLEDT
.ORG

;Edit history
;1)	Program creation
;2)	Make the command .DECLAR<CR> give an error
;3) 	Add version numbers
;4)	Change a Z to a BLOCK 1 so that LINK knows this is a null loseg.
;5)	Require a filename. COMCON requires it, make sure the error
;	gets caught before we pass it to the monitor.
;6)	Update handling of /UNIQUE switch to conform to new monitor handling
;	introduced by MCO 11206.
;7)	Add new /AUTOPUSH switch to allow access to new ability to define
;	commands that preserve a core-image.
;10)	Change some symbols whose names were changed in UUOSYM
;	by MCO 11689. /NT
;11)	Remove edit 5.  COMCON doesn't require a name if the device
;	is pathological and will default the name from the device definition.
;12)	Fix bug with path defaulting.

T4=:1+<T3=:1+<T2=:1+<T1=:1+0>>>	;Temporary ACs
P4=:1+<P3=:1+<P2=:1+<P1=:1+T4>>>;Permanent ACs
CM=:P4+1			;Pointer to command's scan block
FI=:CM+1			;Pointer to filespec scan block
LI=:FI+1			;Offset pointer into list block
P=:17				;Stack pointer

OPDEF	CALL	[PUSHJ	P,]	;So that I don't have to type so much
OPDEF	RET	[POPJ	P,]	;Bad return
OPDEF	RETSKP	[JRST	.POPJ1##] ;good return from most routines
OPDEF	SKP	[TRNA]		;skip over an instruction
OPDEF	NOOP	[TRN]		;do nothing. Ignore skip returns


DEFINE	$WARN(PREFIX,TEXT),<
	CALL [	POP P,T3	;;PC in case desired
		MOVE T2,["%",,[ASCIZ \TEXT\]]
		MOVE T1,[SIXBIT \DCL'PREFIX\]
		JRST ERRORH]	;;And call the error handler
>

	ND NSCANF,0		;Change FX.xxx stuff before turning on.
	ND LSTSIZ,100		;Maximum number of commands to get a list of
	ND PDLSIZ,50
RELOC				;loseg, for data storage
STACK:	BLOCK	PDLSIZ		;Stack

;Scan switch locations
SW0:				;Start of switch area
CLEARS:	BLOCK	1
KILLSW:	BLOCK	1
LISTSW:	BLOCK	1
AUTOSW:	BLOCK	1

;Not really switches, but we want to setom them every time
CMDNAM:	BLOCK	1
CMDFIL:	BLOCK	1
ERRORF:	BLOCK	1
SW9:				;End of switch area

UNIQUE:	BLOCK	1		;Switch to setzm (not setom)


OFFSET:	BLOCK	1		;For SCAN
CMDBLK:	BLOCK	.CMMAX		;Block to do CMAND.s in
	BLOCK	1		;Buffer word
LSTBLK:	BLOCK	LSTSIZ+1	;Block to get a list of commands
RELOC				;Hiseg, for switch tables

KEYS UNQ,<4,3,2,1>		;Possible uniqueness values
				; (must be in this order)
PD.UNQ==1_<UNQ4-1>		;Default for bare switch is /UNIQUE:4

DEFINE SWTCHS,<
SN *AUTOPUSH,AUTOSW,
SS *CLEAR,CLEARS,1,
SS *KILL,KILLSW,1,
SS *LIST,LISTSW,1,
SL *UNIQUE,UNIQUE,UNQ,PD.UNQ,FS.OBV
>

DOSCAN(CM.)			;Generate the switch tables

ISBLK:				;ISCAN block
IFN NSCANF,<XWD 12,%%FXVE>	;If new scan, pass a version number
	IOWD 2,[SIXBIT \DECLAR\
		SIXBIT \COMMAN\]
	XWD OFFSET,'DCL'	;Offset,,sixbit CCL name
ISBLKP:	XWD .-ISBLK,ISBLK

TSBLK:				;TSCAN block
IFN NSCANF,<XWD 12,%%FXVE>	;If new scan, pass a version number
	IOWD	CM.L,CM.N
	XWD	CM.D,CM.M
	XWD	0,CM.P		;Switch table pointers for TSCAN
	EXP	-1		;Use system helper
	XWD	CLRSWT,0	;Clear all answers,,files (no files)
	XWD	ALLIN,ALLOUT	;Allocate input and output filespecs
TSBLKP:	XWD .-TSBLK,TSBLK	;TSCAN block pointer

PDL:	IOWD	PDLSIZ,STACK	;Pointer to stack

;Start of the program itself.
COMMAN:	TDZA	T1,T1		;Non CCL entry
	MOVEI	T1,1		;CCL entry
	MOVEM	T1,OFFSET	;SAVE AS OFFSET FOR SCAN TO LOOK AT
	RESET			;oops.
	MOVE	P,PDL		;Set up stack pointer
	MOVE	T1,ISBLKP	;GET THE ISCAN BLOCK POINTER
	PUSHJ	P,.ISCAN##	;initialize the world
COM1:	MOVE	T1,TSBLKP	;Pointer to TSCAN block
	PUSHJ	P,.TSCAN##	;Ask for a command
	SKIPL	ERRORF		;Did an error flag get set?
	 JRST	COM1		;YEs, forget this line
	SKIPL	CM,CMDNAM	;did we get an output spec? (command name)
	 JRST	COM2		;Yes, skip over single spec checking
	SKIPG	CM,CMDFIL	;Did we get an input spec
	 JRST	[PUSH P,[COM1];Set up return address
		$WARN NCG,<No command given>]
	MOVEM	CM,CMDNAM	;save as output filespec
	SETOM	CMDFIL		;And clear input filespec
COM2:	CALL	CMDCHK		;Check CMDNAM to make sure only name typed
	JRST	COM1		;Error, try again.
	CALL	PRCLIN		;process the line
	JRST	COM1		;and go for another line

CMDCHK:	MOVE	T1,.FXMOD(CM)	;Get the modifications word
	TXNN	T1,FX.NDV	;Make sure he didn't type a device name
	 $WARN	CMD,<Command may not contain device field>
	TXNN	T1,FX.NUL	;Make sure he didn't give an extension
	 $WARN	CMD,<Command may not contain extension field>
	TXNE	T1,FX.DIR	;Make sure he didn't give a directory
	 $WARN	CMD,<Command may not contain any path specification>
	RETSKP

PRCLIN:	SKIPL	CLEARS		;Should we clear all commands?
	 JRST	COMCLR		;Yes, go do it.
	SKIPL	KILLSW		;Should we kill a command
	 JRST	COMKIL		;Yes, kill this particular command
	SKIPL	LISTSW		;Should we list all the command names?
	 JRST	COMLST		;Yes, go do it.
	SKIPL	FI,CMDFIL	;Did we get an input filespec?
	 JRST	COMADD		;Yes, we must be adding commands
	SKIPN	.FXNAM(CM)	;Did a command name come in on this?
	 RET			;Pretend this didn't happen
;	JRST	COMSHO		;show if command but no filespec

COMSHO:	SKIPL	CMDFIL		;Make sure no filespec was typed
	 $WARN	FNA,<Filespec not allowed for /SHOW switch>
	SKIPN	T1,.FXNAM(CM)	;make sure he gave us a command
	 $WARN	CMN,<Command name required for /SHOW switch>
	SKIPE	.FXNMM(CM)	;Is the command wildcarded?
	 JRST	COMSH.		;Nope, just do this one command
	MOVEI	T1,LSTSIZ	;LSTBLK size
	MOVEM	T1,LSTBLK+.CMCOU;Save as max number of command names to return
	MOVE	T1,[.CMLST,,LSTBLK] ;get the list of names
	CMAND.	T1,
	 $WARN	CGL,<Couldn't get list of commands>
	SETZ	LI,		;Offset of 0 into LSTBLK
COMSH$:	CAML	LI,LSTBLK+.CMCOU ;Do we still have more commands to go?
	 RET			;no, return to top level
	MOVE	T1,LSTBLK+1(LI)	;Get a command name
	CALL	COMSH.		;List it
	AOJA	LI,COMSH$	;and go do another command




COMSH.:	SETZM	CMDBLK		;Clear CMAND. block
	MOVE	T2,[CMDBLK,,CMDBLK+1];BLT Pointer
	BLT	T2,CMDBLK+.CMMAX-1 ;Clear the whole block
	MOVEM	T1,CMDBLK+.CMCMN ;Which command to return information on
	MOVEI	T1,.CMMAX	;Maximum size of a command block
	MOVEM	T1,CMDBLK+.CMSIZ ;Save as amount of info to return us
	MOVE	T1,[XWD .CMRET,CMDBLK] ;Args for UUO
	CMAND.	T1,		;Get information on this command
	 $WARN	NSC,<No such command>
	MOVE	T1,CMDBLK+.CMNAM ;Get command name
	CALL	.TSIXN##	;Type it out in sixbit
	LDB	P1,[POINTR CMDBLK+.CMFLA,CM.UNQ]
	JUMPE	P1,COMSH0	;If no uniqueness, skip it
	MOVEI	T1,[ASCIZ |/UNIQUE:|]	;Switch string
	CALL	.TSTRG##	;Type it
	MOVE	T1,UNQSTR(P1)	;Get translation string for the bits
	CALL	.TSTRG##	;Type the value(s)
COMSH0:	MOVEI	T1,[ASCIZ |/AUTOPUSH|]	;String to use
	MOVX	T2,CM.AUT	;Auto-push bit
	TDNE	T2,CMDBLK+.CMFLA ;Is it lit?
	CALL	.TSTRG##	;Yes, type it out
	MOVEI	T1,[ASCIZ | = |] ;ascii equals sign
	CALL	.TSTRG##	;Type it out
	SKIPN	T1,CMDBLK+.CMDVC ;Get device name
	 JRST	COMSH1
	CALL	.TSIXN##	;Type out device name
	CALL	.TCOLN##	;indicate device with a colon
COMSH1:	MOVE	T1,CMDBLK+.CMFLE ;Get filename
	CALL	.TSIXN##	;Type it out.
	SKIPN	T1,CMDBLK+.CMEXT ;Get extension
	 JRST	COMSH2		;skip
	MOVEI	T1,"."		;Dot.
	CALL	.TCHAR##	;Precede it with a dot
	MOVE	T1,CMDBLK+.CMEXT ;get extension back again
	CALL	.TSIXN##
COMSH2:	SKIPN	CMDBLK+.CMPPN	;Get PPN
	 JRST	COMSH9		;Finished.
	MOVEI	T1,"["		;Start PPN typeout
	CALL	.TCHAR##	;type it out
	MOVE	T1,CMDBLK+.CMPPN ;Get PPN
	CALL	.TXWDW##	;Type it out
	MOVE	P1,[IOWD 5,CMDBLK+.CMSFD] ;AOBJN pointer to SFD names
COMSH3:	SKIPN	1(P1)		;Check to see if next level of SFD is there
	 JRST	COMSH8		;nope, close of filespec
	CALL	.TCOMA##	;Type out a separating comma
	MOVE	T1,1(P1)	;Get SFD name
	CALL	.TSIXN##
	AOBJN	P1,COMSH3	;And find another SFD
COMSH8:	CALL	.TRBRK##	;Close PPN part of filespec
COMSH9:	CALL	.TCRLF##	;End typeout
	RET
COMADD:	SETZM	CMDBLK		;Clear CMAND uuo block
	MOVE	T1,[CMDBLK,,CMDBLK+1] ;BLT pointer
	BLT	T1,CMDBLK+.CMMAX-1 ;clear it all out
	MOVE	T1,.FXNAM(CM)	;Get the command name
	MOVEM	T1,CMDBLK+.CMNAM;Save as command name in uuo block
IFE NSCANF,<MOVE T1,.FXDEV(FI)>	;Device name (DSK: default)
IFN NSCANF,<
	SKIPN T1,.FXDEV(FI) 	;get device name
	MOVSI T1,'DSK'		;Default to DSK:
>;END IFN NSCANF
	MOVEM	T1,CMDBLK+.CMDVC ;Save as device to run off of
	MOVEI	P1,3		;Number of words we are using so far
	SKIPE	T1,.FXNAM(FI)	;Get the filename of program to be run
	MOVEI	P2,4		;Number of words we have taken already
	MOVEM	T1,CMDBLK+.CMFLE ;save as filename
	HLLZ	T1,.FXEXT(FI)	;Get extension
	JUMPE	T1,COMAD2	;If nothing, proceed
	MOVEM	T1,CMDBLK+.CMEXT;Set as extension of program to run
	MOVEI	P2,5		;Bump P2 to include this
COMAD2:	MOVE	T4,.FXDIR(FI)	;Get ppn returned by SCAN
	TLNN	T4,-1		;Project number seen?
	HLL	T4,.MYPPN##	;No, default it
	TRNN	T4,-1		;Programmer number seen?
	HRR	T4,.MYPPN##	;No, default that
	SKIPE	.FXDIM(FI)	;Was there any point to this exercise?
	MOVEM	T4,.FXDIR(FI)	;Yes, update the ppn word
	MOVEI	T4,.FXDIR(FI)	;Pointer to source directory
	MOVE	T3,[XWD -6,CMDBLK+.CMPPN] ;Pointer to destination directory
COMAD3:	SKIPN	T1,(T4)		;Anything in the source?
	 JRST	COMAD8		;nope.
	MOVEI	P2,-CMDBLK+1(T3);Update number of words deposited
	MOVEM	T1,(T3)		;Save directory word
	ADDI	T4,2		;Point to next input directory name
	AOBJN	T3,COMAD3	;And go get another word
COMAD8:	SKIPE	T1,UNIQUE	;Uniqueness bits specified?
	 DPB	T1,[POINTR P2,CM.UNQ]	;Yes, add flags to count word
	SKIPLE	AUTOSW		;/AUTO:YES?
	 TXO	P2,CM.AUT	;Yes, add flag to count word
	MOVEM	P2,CMDBLK+.CMFLA ;Save number of words we picked up
	MOVE	T1,[XWD .CMADD,CMDBLK] ;Arg for UUO
	CMAND.	T1,		;Add this command
	 $WARN	CUA,<CMAND. UUO function .CMADD failed>
	RET			;Command added, done.
COMCLR:	SKIPN	.FXNAM(CM)	;Did we get a command name?
	SKIPL	CMDFIL		;or an input filespec?
	 $WARN	CLS,</CLEAR switch must be standalone>
	SETZM	CMDBLK+0	;Clear command block
	MOVE	T1,[XWD .CMINT,CMDBLK] ;Initialize (clear) command data base
	CMAND.	T1,		;Wipe.
	 $WARN	CUI,<CMAND. UUO function .CMINT failed>
	RET
COMKIL:	SKIPL	CMDFIL		;Make sure we don't have a filespec
	 $WARN	KMN,</KILL switch cannot take a filespec>
	MOVEI	T1,2		;Number of words in argument block
	MOVEM	T1,LSTBLK+.CMCOU ;Put into list block
	MOVE	T1,.FXNAM(CM)	;Get command name to wipe
	MOVEM	T1,LSTBLK+1	;Save as command to delete
	MOVE	T1,[.CMDEL,,LSTBLK] ;Delete a command
	CMAND.	T1,		;Wipe!
	 $WARN	NSC,<No such command>
	RET
COMLST:	SKIPN	.FXNAM(CM)	;Did we get a command name?
	SKIPL	CMDFIL		;or an input filespec?
	 $WARN	CLS,</LIST switch must be standalone>
	MOVEI	T1,LSTSIZ	;Size of the list buffer
	MOVEM	T1,LSTBLK	;Save in the list block
	MOVE	T1,[.CMLST,,LSTBLK] ;Args to list the command names
	CMAND.	T1,		;Get the list
	 $WARN	CUL,<CMAND. UUO function .CMLST failed>
	SETZB	P1,LI		;Clear both counters
COMLS1:	CAML	LI,LSTBLK+.CMCOU ;Have we typed out all commands?
	 JRST	.TCRLF##	;yes, let CRLF terminate for us
	SOJG	P1,COMLS4	;Check to see if we should crlf
	CALL	.TCRLF##	;Yes, terminate the line
	MOVEI	P1,^D8		;reset number of commands to type before crlf
	SKP			;and skip
COMLS4:	 CALL	.TTABC##	;Seperate
COMLS3:	MOVE	T1,LSTBLK+1(LI)	;Get the command name
	CALL	.TSIXN##	;Type it out
	AOJA	LI,COMLS1	;And go do another command

CLRSWT:
	HLRZ	T1,.JBSA	;Get original amount of core
	MOVEM	T1,.JBFF	;save as current amount of core
	CORE	T1,		;And release core
	 $WARN	CFC,<Core UUO failed in cleanup routine>
	SETOM	SW0		;Clear first switch
	MOVE	T1,[SW0,,SW0+1]	;BLT pointer to clear all switches
	BLT	T1,SW9		;Clear them all
	SETZM	UNIQUE		;Also clear the bit-valued switch
	RET			;return

ALLIN:	SKIPL	CMDFIL		;Make sure we don't already have a filespec
	 CALL	[$WARN MFI,<Multiple filespecs are not legal>]
	HRRZ	T1,.JBFF	;Get pointer to free core
	MOVEM	T1,CMDFIL	;Save as input filespec

ALLOC:	MOVEI	T2,.FXLEN
	ADDM	T2,.JBFF	;Increase memory size
	MOVE	T3,.JBFF	;Current core size
	CORE	T3,		;Make sure we get it
	 $WARN	CUF,<Core UUO failed in memory allocater>
	RET			;And return to scan

ALLOUT:	SKIPL	CMDNAM		;Count times we have given this away
	 CALL	[$WARN MCN,<Multiple command names are not legal>]
	HRRZ	T1,.JBFF	;Get pointer to free area
	MOVEM	T1,CMDNAM	;save as output filespec
	JRST	ALLOC		;And allocate the core we are taking
	RET

ERRORH:	CALL	.ERMSA##	;Call scan's error handler
	CALL	.TCRLF##	;Finish the line
	AOS	ERRORF		;Bump error count (flag)
	RET			;and return
;The translation table for uniqueness bits (right-adjusted) to display text

UNQSTR:	[ASCIZ |NONE|]		;0
	[ASCIZ |4|]		;CM.UN4
	[ASCIZ |3|]		;CM.UN3
	[ASCIZ |(3,4)|]		;CM.UN3!CM.UN4
	[ASCIZ |2|]		;CM.UN2
	[ASCIZ |(2,4)|]		;CM.UN2!CM.UN4
	[ASCIZ |(2,3)|]		;CM.UN2!CM.UN3
	[ASCIZ |(2,3,4)|]	;CM.UNQ^!CM.UN1
	[ASCIZ |1|]		;CM.UN1
	[ASCIZ |(1,4)|]		;CM.UN1!CM.UN4
	[ASCIZ |(1,3)|]		;CM.UN1!CM.UN3
	[ASCIZ |(1,3,4)|]	;CM.UNQ^!CM.UN2
	[ASCIZ |(1,2)|]		;CM.UN1!CM.UN2
	[ASCIZ |(1,2,4)|]	;CM.UNQ^!CM.UN3
	[ASCIZ |(1,2,3)|]	;CM.UNQ^!CM.UN4
	[ASCIZ |(1,2,3,4)|]	;CM.UNQ

	END	COMMAN