Google
 

Trailing-Edge - PDP-10 Archives - bb-x130a-sb - whycrs.mac
There are 5 other files named whycrs.mac in the archive. Click here to see a list.
	TITLE	WHYCRS - Read AVAIL.SYS and report reloads
	SUBTTL	G.M. Uhler/GMU   22-Dec-82


;Copyright (C) 1980, 1981, 1982, 1983 by
;Digital Equipment Corporation, Maynard, Mass.
;
;
;This software is furnished under a license and may be used and copied
;only  in  accordance  with  the  terms  of  such license and with the
;inclusion of the above copyright notice.  This software or any  other
;copies thereof may not be provided or otherwise made available to any
;other person.  No title to and ownership of the  software  is  hereby
;transferred.
;
;The information in this software is subject to change without  notice
;and  should  not  be  construed  as a commitment by Digital Equipment
;Corporation.
;
;Digital assumes no responsibility for the use or reliability  of  its
;software on equipment which is not supplied by Digital.


	SEARCH	JOBDAT,MACTEN,SCNMAC,UUOSYM
	.REQUEST	REL:SCAN,REL:HELPER
	.DIRECTIVE .XTABM,FLBLST
	SALL


	WCSVER==1
	WCSMIN==0
	WCSEDT==2
	WCSWHO==0

	TWOSEG
	RELOC	400000
	LOC	.JBVER
	VRSN.	(WCS)
	RELOC



;Assembly and loading instructions
;
;	.R MACRO
;	*WHYCRS=WHYCRS
;	*^C
;	.R LINK
;	*WHYCRS,REL:SCAN,REL:HELPER/G
;AC definitions

	F==0			;Flags
	T1==1			;First of four temporaries
	T2==2
	T3==3
	T4==4
	P1==5			;First of four preserved registers
	P2==6
	P3==7
	P4==10
	N==P3			;SCAN convention
	C==P4			;SCAN convention
	P==17			;PDL pointer


;Parameter definitions

	.PDLEN==50		;Size of PDL
	BLKSIZ==200		;Size of a disk block
	DSK==1			;Input channel
	OUT==2			;Output channel
	WRKLEN==1200		;Number of words in working entry 


;Offsets in the header for ERROR.SYS

	.EHTYP==0		;Type, versions, lengths
	  EH.TYP==777B8		;Mask for type field
	  EH.CRS==1B16		;Entry extracted from CRASH.EXE
	  EH.FFM==7B20		;Mask for format version field
	    EL.FVR==0		;Format version of ERROR.SYS
	  EH.HFM==7B23		;Mask for header version field
	    EL.HVR==2		;Header version of ERROR.SYS
	  EH.HLN==7B26		;Mask for header length field
	    EL.HED==5		;Length of standard header
	  EH.BLN==777B35	;Mask for body length
	.EHDTM==1		;Universal date/time of entry
	.EHUPT==2		;Uptime of system when entry created
	.EHASN==3		;CPU serial number of cpu on which error was detected
	.EHSEQ==4		;Sequence number of entry

;Offsets in AVAIL.SYS monitor run values (.ESMRV) body

	MRVPSN==0		;-Len,,Offset from MRVPSN to ASCIZ system name
	MRVVER==1		;Monitor version number
	MRVUPT==2		;Uptime in universal date/time format
	MRVCTM==3		;Monitor crash time (+/- 6 min) in universal date/time fmt
	MRVRTM==4		;Monitor reload time in universal date/time format
	MRVWHY==5		;Why reload code in SIXBIT
	MRVIDT==6		;Sum of all incremental date/time changes since reload
	MRVSNM==7		;First of 5 words of ASCIZ system name
;Flag definitions

	FL.WTF==1B35	;Write this character to output file
	FL.HDR==1B34	;Header needed on next entry
	FL.ISC==1B33	;Input scan block allocated
	FL.OSC==1B32	;Output scan block allocated


;Macro definitions

	DEFINE	ERROR	(FIRST,LABEL),<
	  PUSHJ	P,ERRMSG
	  XLIST
	  IFNB <LABEL>, <CAIA [ASCIZ\?'FIRST'\]
			 JRST LABEL
			>
	  IFB  <LABEL>, <CAI  [ASCIZ\?'FIRST'\]>
	  LIST
	>
WHYCRS:	JFCL			;No CCL entry
	RESET			;Clear the world
	MOVE	P,[IOWD .PDLEN,PDL] ;Setup push down list
	MOVEI	T1,WHYCRS	;Setup restart
	MOVEM	T1,.JBREN	; address
	MOVE	T1,.JBFF	;Get initial value of .JBFF
	MOVEM	T1,MINCOR	;Save for core downs
	MOVE	T1,[.ISCBL,,.ISCBK] ;Point to .ISCAN block
	PUSHJ	P,.ISCAN##	;Initialize SCAN
WCSSCN:	SETZM	Z.BGN		;First word to zero
	MOVE	T1,[Z.BGN,,Z.BGN+1] ;Setup BLT pointer
	BLT	T1,Z.END	;Clear it all
	SETOM	P.BGN		;Initialize /BEGIN,
	SETOM	P.END		; /END,
	SETOM	P.REAS		; and /REASON switch values
	SETZM	F		;No flags
	MOVE	T1,MINCOR	;Get min core needed
	MOVEM	T1,.JBFF	;Start of buffers
	CORE	T1,		;Reduce core to a minimum
	  JFCL			;Don't care
	MOVE	T1,[.TSCBL,,.TSCBK] ;Point to .TSCAN block
	PUSHJ	P,.TSCAN##	;Crack the command line
	PUSHJ	P,APLDFL	;Apply defaults
	  JRST	WCSSCN		;Error in command
	PUSHJ	P,OPNFIL	;Open input and output files
	  JRST	WCSSCN		;Failed
	SETCM	T1,P.BGN	;Get value of /BEGIN
	SKIPN	T1		;Value specified?
	SETOM	T1		;No, SETCAM will make this zero
	SETCAM	T1,P.BGN	;Save for checks
	SETCM	T1,P.END	;Get value of /END
	SKIPN	T1		;Value specified?
	MOVX	T1,1B0		;No, SETCAM will make this -1_-1
	SETCAM	T1,P.END	;Save for checks
	MOVE	T1,ILKBLK+.RBSIZ ;Get size of input file
	SUBI	T1,WRKLEN	;Minus size of working entry
	SKIPG	P1,T1		;If only working entry in file,
	JRST	WCSSCN		; quit now
	PUSH	P,.JBFF		;Save pointer to table
	ADDB	T1,.JBFF	;Add size of stuff we want to read
	CORE	T1,		;Get the core
	  ERROR	<Can't get core for AVAIL data>
	MOVE	P2,0(P)		;Pointer to first word of table
	USETI	DSK,<WRKLEN/BLKSIZ>+1 ;Set to read 1st block past working entry
RDLOOP:	INPUT	DSK,IOW		;Read next block
	STATZ	DSK,IO.ERR!IO.EOF ;Errors?
	ERROR	<IOERR or unexpected EOF on input file>
	MOVSI	T1,BUF+1	;Skip resync word in block
	HRRI	T1,(P2)		; and move to next slot in buffer
	BLT	T1,BLKSIZ-2(P2)	;Move it
	ADDI	P2,BLKSIZ-1	;Bump buffer pointer by len of entry
	SUBI	P1,BLKSIZ	;Done another 200 wds
	JUMPG	P1,RDLOOP	;Loop if more
	POP	P,P1		;P1=1st word of AVAIL data
	TXO	F,FL.WTF	;Write data to file now
PRLOOP:	LDB	T1,[POINTR .EHTYP(P1),EH.TYP] ;Get entry code
	LDB	P2,[POINTR .EHTYP(P1),EH.HLN] ; and header length
	ADDI	P2,(P1)		;Compute address of first word of body
	CAIN	T1,.ESEOF	;EOF?
	JRST	ENDIT		;Yes, go finish up
	CAIE	T1,.ESMRV	;Monitor run value entry?
	JRST	PRENDL		;No, try next
	MOVE	T1,MRVCTM(P2)	;Get date/time of crash
	CAML	T1,P.BGN	;Is it in the desired range?
	CAMLE	T1,P.END	;?
	JRST	PRENDL		;No, ignore it
	SETCM	T1,P.REAS	;Get /REASON value
	JUMPE	T1,PRLOO1	;Automatic match if none specified
	HLRZ	T1,MRVWHY(P2)	;Get reason for crash
	CAIE	T1,'S..'	;STOPCD?
	SKIPA	T1,MRVWHY(P2)	;No, just get SIXBIT reason
	HRLZ	T1,MRVWHY(P2)	;Yes, get just 3 character name
	CAME	T1,P.REAS	;Match with /REASON?
	JRST	PRENDL		;No, skip it
PRLOO1:	AOS	TOTAL		;Count it
	HLRZ	T2,MRVCTM(P2)	;Get date
	IDIVI	T2,7		;Compute day in T3
	CAIE	T3,3		;Saturday?
	CAIN	T3,4		; or Sunday?
	JRST	NOTPTM		;Yes, not prime time
	HRRZ	T2,MRVCTM(P2)	;Get time
	CAIL	T2,252525	;Before 0800?
	CAILE	T2,600000	; after 1800?
	JRST	NOTPTM		;Yes, don't count it
	AOS	PRIME		;Bump count of prime-time reloads
	SKIPA	T1,[[ASCIZ/* /]] ;Flag prime-time reloads with a *
NOTPTM:	MOVEI	T1,[ASCIZ/  /]	;No flag if not prime time
	PUSH	P,T1		;Save prefix
	MOVEI	T1,[ASCIZ\
        Monitor name        Ver  Crash date/time    Reload date/time   Reason
  ------------------------ ----- ------------------ ------------------ ------
\]
	TXON	F,FL.HDR	;Need to print a header?
	PUSHJ	P,.TSTRG##	;Yes, put it out
	POP	P,T1		;Get prefix back
	PUSHJ	P,.TSTRG##	;Type it
	MOVSI	T2,(POINT 7,0)	;Build byte pointer to
	HRR	T2,MRVPSN(P2)	; system name
	ADDI	T2,MRVPSN(P2)	;Relocate it
	MOVEI	T3,^D25		;Print 25 characters
NMLOOP:	ILDB	T1,T2		;Get next one
	JUMPE	T1,NMENDL	;End of string?
	PUSHJ	P,.TCHAR##	;Put it out
	SOJG	T3,NMLOOP	;Loop for all
	CAIA			;Skip space
NMENDL:	PUSHJ	P,.TSPAC## 	;Pad out string to the
	SOJG	T3,.-1		;  full 25 characters
	MOVE	T1,MRVVER(P2)	;Monitor version number
	PUSHJ	P,.TOCTW##	;Type it
	PUSHJ	P,.TSPAC##	; and a space
	MOVE	T1,MRVCTM(P2)	;Crash date/time
	PUSHJ	P,.TDTTM##	;Type it
	PUSHJ	P,.TSPAC##	; and a space
	MOVE	T1,MRVRTM(P2)	;Reload date/time
	PUSHJ	P,.TDTTM##	;Type it
	PUSHJ	P,.TSPAC##	; and a space
	MOVE	T1,MRVWHY(P2)	;SIXBIT why reload
	HLRZ	T2,T1		;Get left half
	CAIN	T2,'S..'	;Was it a STOPCD?
	HRLZS	T1		;Yes, don't print S..
	PUSHJ	P,.TSIXN##	;Type it
	PUSHJ	P,.TCRLF##	;Add a CRLF

PRENDL:	LDB	T1,[POINTR .EHTYP(P1),EH.BLN] ;Get size of body of this entry
	ADDI	T1,(P2)		;Find end of entry
	MOVE	P1,T1		;Setup new pointer
	JRST	PRLOOP		;Loop for next
ENDIT:	PUSHJ	P,.TCRLF##	;Add a CRLF
	MOVEI	T1,[ASCIZ/
* = Reload occurred during prime-time
/]
	SKIPE	PRIME		;Were there any?
	PUSHJ	P,.TSTRG##	;Yes, print message
	MOVEI	T1,[ASCIZ/
Total number of reloads in specified range = /]
	PUSHJ	P,.TSTRG##	;Type it
	MOVE	T1,TOTAL	;Get number
	PUSHJ	P,.TDECW##	;Type it
	MOVEI	T1,[ASCIZ/
Total prime-time reloads in specified range = /]
	PUSHJ	P,.TSTRG##	;Type it
	MOVE	T1,PRIME	;Get the number
	PUSHJ	P,.TDECW##	;Type it
	MOVEI	T1,[ASCIZ/
   (Monday-Friday, 0800-1800)
/]
	PUSHJ	P,.TSTRG##
	RELEASE	OUT,		;Close output
	RELEASE	DSK,		;Close input
	JRST	WCSSCN		;and try next command
;Subroutine to convert the SCAN blocks to OPEN, LOOKUP and
;ENTER blocks and then open the appropriate files.
;Call:
;	PUSHJ	P,OPNFIL
;	  Return here if something failed
;	Return here if all ok

OPNFIL:	MOVEI	T1,ISCBLK	;Point to input scan block
	MOVEI	T2,IOPBLK	;Point to OPEN block
	MOVEI	T3,ILKBLK	;Point to LOOKUP block
	PUSHJ	P,.STOPN##	;Convert SCAN block
	  ERROR	<Input SCAN block conversion failed>,.POPJ##
	MOVX	T1,.IODMP	;Dump mode for input file
	DPB	T1,[POINTR IOPBLK,IO.MOD] ;Store it
	MOVX	T1,.RBSIZ	;Get size of lookup block
	MOVEM	T1,ILKBLK+.RBCNT ;Store it
	OPEN	DSK,IOPBLK	;Open the channel
	  ERROR	<Input device OPEN failed>,.POPJ##
	LOOKUP	DSK,ILKBLK	;Lookup the file
	  ERROR	<Input file LOOKUP failed>,.POPJ##
	MOVEI	T1,OSCBLK	;Point to output scan block
	MOVEI	T2,OOPBLK	;Point to output OPEN block
	MOVEI	T3,OENBLK	;Point to output ENTER block
	PUSHJ	P,.STOPN##	;Convert SCAN block
	  ERROR	<Output SCAN block conversion failed>,.POPJ##
	MOVX	T1,.IOASC	;Use ASCII mode for output file
	DPB	T1,[POINTR OOPBLK,IO.MOD] ;Store it
	MOVSI	T1,OBUF		;Output buffer header
	MOVEM	T1,OOPBLK+.OPBUF ;Store it
	MOVX	T1,.RBSIZ	;Get size of ENTER block
	MOVEM	T1,OENBLK+.RBCNT ;Store it
	OPEN	OUT,OOPBLK	;Open channel
	  ERROR	<Output device OPEN failed>,.POPJ##
	ENTER	OUT,OENBLK	;Enter file
	  ERROR	<Output file ENTER failed>,.POPJ##
	JRST	.POPJ1##	;Give skip return


;Subroutine to print an error message.
;Call:
;	PUSHJ	P,ERRMSG
;	CAI	[ASCIZ\msg to print\]
;	 Return here always

ERRMSG:	HRRZ	T1,@0(P)	;Get message address
	PUSHJ	P,.TSTRG##	;Type it
	PUSHJ	P,.TCRLF##	;Add a CRLF
	JRST	.POPJ1##	;Give skip return
;Subroutine to write one character to the output file or TTY.
;Call with character in T1 and with FL.WTF set to write to the
;output file
;Call:
;	PUSHJ	P,TYPCHR
;	Return here always

TYPCHR:	TXNN	F,FL.WTF	;Write to file?
	JRST	TYPCH1		;No, TTY
	SOSG	OBUF+.BFCTR	;Room for more?
	OUTPUT	OUT,		;No, flush
	IDPB	T1,OBUF+.BFPTR	;Store in buffer
	POPJ	P,		;Return
TYPCH1:	OUTCHR	T1		;Write it to TTY
	POPJ	P,		;Return


;Subroutine to return the address of the input scan block
;Call:
;	PUSHJ	P,ALCINP
;	 Return here always with:
;		T1=Address of scan block
;		T2=Length of scan block

ALCINP:	TXOE	F,FL.ISC	;Already been here once?
	  ERROR	<Multiple input specs illegal>,WCSSCN
	MOVEI	T1,ISCBLK	;Point at scan block
	MOVX	T2,.FXLEN	; and length
	POPJ	P,


;Subroutine to return the address of the output scan block
;Call:
;	PUSHJ	P,ALCOUT
;	 Return here always with:
;		T1=Address of scan block
;		T2=Length of scan block

ALCOUT:	TXOE	F,FL.OSC	;Already been here once?
	  ERROR	<Multiple output specs illegal>,WCSSCN
	MOVEI	T1,OSCBLK	;Point at scan block
	MOVX	T2,.FXLEN	; and length
	POPJ	P,
;Subroutine to check input and output scan blocks and apply any
;defaults that the user did not type.
;Call:
;	PUSHJ	P,APLDFL
;	  Return here if error
;	Return here if ok

APLDFL:	MOVX	T1,FX.NDV	;Get null device bit
	TDNN	T1,OSCBLK+.FXMOD ;User type a device?
	SKIPN	OSCBLK+.FXDEV	;  or nothing at all?
	SKIPA	T2,[SIXBIT/TTY/] ;Default output device is TTY
	JRST	APLDF1		;Use his device
	MOVEM	T2,OSCBLK+.FXDEV ;Store default device in block
	ANDCAM	T1,OSCBLK+.FXMOD ;Clear bit
	ANDCAM	T1,OSCBLK+.FXMOM ;  and mask
APLDF1:	SETCM	T1,OSCBLK+.FXNMM ;Get mask for filename
	JUMPE	T1,APLDF2	;Go if no wildcards
	AOSN	T1		;Error if wildcards
	SKIPE	OSCBLK+.FXNAM	;...
	JRST	APLOER
	MOVE	T1,[SIXBIT/WHYCRS/] ;Default filename is WHYCRS
	MOVEM	T1,OSCBLK+.FXNAM ;Store it
	SETOM	OSCBLK+.FXNMM	;Set full mask
APLDF2:	HRRZ	T1,OSCBLK+.FXEXT ;Get mask for extension
	CAIN	T1,777777	;Full mask?
	JRST	APLDF3		;Yes, use his extension
	SKIPE	OSCBLK+.FXEXT	;Error if wildcards
	JRST	APLOER		;...
	HRLOI	T1,'LST'	;Default extension is LST
	MOVEM	T1,OSCBLK+.FXEXT ;Store it
APLDF3:	MOVEI	T1,OSCBLK	;Point to output scan block
	PUSHJ	P,CHKDIR	;Check for wildcards in directory
APLOER:	  ERROR	<Wildcards illegal in output spec>,.POPJ##
	MOVX	T1,FX.NDV	;Get null device bit
	TDNN	T1,ISCBLK+.FXMOD ;User type a device?
	SKIPN	ISCBLK+.FXDEV	;Or nothing at all?
	SKIPA	T2,[SIXBIT/SYS/] ;Default input device is SYS
	JRST	APLDF4		;Use his
	MOVEM	T2,ISCBLK+.FXDEV ;Store device
	ANDCAM	T1,ISCBLK+.FXMOD ;Clear bit
	ANDCAM	T1,ISCBLK+.FXMOM ;  and mask
APLDF4:	SETCM	T1,ISCBLK+.FXNMM ;Get mask for filename
	JUMPE	T1,APLDF5	;Go if fully specified
	AOSN	T1		;Error if wildcards
	SKIPE	ISCBLK+.FXNAM	;...
	JRST	APLIER		;...
	MOVE	T1,[SIXBIT/AVAIL/] ;Default filename is AVAIL
	MOVEM	T1,ISCBLK+.FXNAM ;Store it
	SETOM	ISCBLK+.FXNMM	;Set full mask
APLDF5:	HRRZ	T1,ISCBLK+.FXEXT ;Get mask for extension
	CAIN	T1,777777	;Full mask?
	JRST	APLDF6		;Yes, use his extension
	SKIPE	ISCBLK+.FXEXT	;Error if wildcards
	JRST	APLIER		;...
	HRLOI	T1,'SYS'	;Default extension is SYS
	MOVEM	T1,ISCBLK+.FXEXT ;Store it
APLDF6:	MOVEI	T1,ISCBLK	;Point to input scan block
	PUSHJ	P,CHKDIR	;Check for wildcards in directory
APLIER:   ERROR	<Wildcards illegal in input spec>,.POPJ##
	JRST	.POPJ1##	;Give skip return
;Subroutine to check the directory specified in a scan block for
;wildcards.
;Call:
;	MOVEI	T1,address of scan block
;	PUSHJ	P,CHKDIR
;	 Return here is wildcard found
;	Return here if no wildcards

CHKDIR:	MOVX	T2,FX.DIR	;Get directory specified bit
	TDNN	T2,.FXMOD(T1)	;[-]??
	JRST	.POPJ1##	;Yes
	SETCM	T2,.FXDIM(T1)	;Get mask for PPN
	JUMPN	T2,.POPJ##	;Error if wildcards
	MOVEI	T1,.FXDIR+2(T1)	;Point to first SFD
	HRLI	T1,-<.FXLND-1>	;Make it an AOBJN pointer
CHKDI1:	SKIPN	(T1)		;End of list?
	JRST	.POPJ1##	;Yes, give skip return
	SETCM	T2,1(T1)	;Get mask for next word of directory
	JUMPN	T2,.POPJ##	;Error if wildcards
	ADDI	T1,1		;Step to next word
	AOBJN	T1,CHKDI1	;Loop for all
	JRST	.POPJ1##	;Give good return
;High segment data areas

	DEFINE	SWTCHS,<
	  XLIST
	  SP	BEGIN,P.BGN,.SWDTP##,,FS.VRQ
	  SP	END,P.END,.SWDTP##,,FS.VRQ
	  SP	REASON,P.REAS,.SIXSW##,,FS.VRQ
	  LIST
	>

	DOSCAN	(WCSSW)		;Generate scan tables


.ISCBK:	IOWD	1,[SIXBIT/WHYCRS/] ;Name is WHYCRS
	EXP	0
	EXP	TYPCHR		;Character typer address
.ISCBL==.-.ISCBK

.TSCBK:	IOWD	WCSSWL,WCSSWN
	XWD	WCSSWD,WCSSWM
	XWD	0,WCSSWP
	EXP	-1
	EXP	0
	XWD	ALCINP,ALCOUT
.TSCBL==.-.TSCBK


;Low segment data areas

	RELOC

MINCOR:	BLOCK	1		;Initial size of program
PDL:	BLOCK	.PDLEN		;Push down list
IOW:	IOWD	BLKSIZ,BUF	;IOWD for buffer
	EXP	0		;Terminator

Z.BGN==.			;Start of block to zero on startup
ISCBLK:	BLOCK	.FXLEN		;Input SCAN block
OSCBLK:	BLOCK	.FXLEN		;Output SCAN block
IOPBLK:	BLOCK	.OPBUF+1	;Input OPEN block
OOPBLK:	BLOCK	.OPBUF+1	;Output OPEN block
ILKBLK:	BLOCK	.RBSIZ+1	;Input LOOKUP block
OENBLK:	BLOCK	.RBSIZ+1	;Output ENTER block
P.BGN:	BLOCK	1		;Value of /BEGIN switch
P.END:	BLOCK	1		;Value of /END switch
P.REAS:	BLOCK	1		;Value of /REASON switch
TOTAL:	BLOCK	1		;Total number of reloads
PRIME:	BLOCK	1		;Total number during prime-time
OBUF:	BLOCK	.BFCTR+1	;Output buffer header
BUF:	BLOCK	BLKSIZ		;Buffer for input file
Z.END==.-1			;End of area to zero


	END	WHYCRS