Google
 

Trailing-Edge - PDP-10 Archives - bb-x130a-sb - swierm.mac
There are 4 other files named swierm.mac in the archive. Click here to see a list.
	TITLE	.ERROR	SWIL error message processing
	SUBTTL	Robert Houk/RDH

	SEARCH	SWIDEF,	SWIL		;SWIL PACKAGE DEFINITIONS
	SEARCH	JOBDAT,	MACTEN,	UUOSYM	;STANDARD DEFINITIONS

	SALL				;PRETTY LISTINGS
	.DIREC	FLBLST			;PRETTIER LISTINGS

	TWOSEG	400000

Copyright (C) Digital Equipment Corporation 1984.

	COMMENT	\

Copyright (C) 1984
Digital Equipment Corporation, Maynard, Massachusetts, U.S.A.

This software is furnished under a license and may be used and copied only
in accordance with the terms of such license and with the inclusion of the
above copyright notice.  This software or any other copies thereof may not
be provided or otherwise made available to any other person.   No title to
and ownership of the software is hereby transferred.

The information in this software is subject to change  without  notice and
should not be construed as a commitment by Digital Equipment Corporation.

Digital  assumes  no  responsibility  for  the  use  or reliability of its
software on equipment which is not supplied by Digital.

\


;SWIERM VERSION IDENTIFICATION

MAJVER==1	;MAJOR VERSION LEVEL
MINVER==0	;MINOR (MAINTENANCE RELEASE) LEVEL
CSTVER==0	;CUSTOMER VERSION (WHO LAST . . .)
EDTVER==0	;EDIT LEVEL

%%SERM==:<BYTE (3)CSTVER(9)MAJVER(6)MINVER(18)EDTVER>

IF2,<	PURGE	CSTVER,MAJVER,MINVER,EDTVER>
	SUBTTL	Junk error handling routines

.SPOPJ::POP	P,.JBBLT	;POP OFF JUNK (PUSHJ TO OUTSTR/JRST)
	MOVEI	M0,$EDSTP	;FLAG FATAL ERROR
				;SET ERROR CODE AND RETURN

.M0ERR::
M0ERR:;	MOVEM	M0,.IOERR(IO)	;SET ERROR
	POPJ	P,		;AND RETURN

.M1ERR::
M1ERR:;	MOVEM	M0,.IOERR(T1)	;SET ERROR
	POPJ	P,		;AND RETURN

.M0IOZ::
M0IOZ:;	MOVEM	M0,.IOERR(IO)	;SET ERROR
	PUSHJ	P,.IOABO##	;ZAP THE FILE
	 JFCL			;DUH?
	POPJ	P,		;RETURN
	SUBTTL	Error messages - File access errors

;ERPIN  --  ISSUE ERROR MESSAGE FOR .IOPIN (OPEN) ERROR
;ERPOU  --  ISSUE ERROR MESSAGE FOR .IOPOU (CREATE) ERROR
;ERFDL  --  ISSUE ERROR MESSAGE FOR .IOFDL (DELETE) ERROR
;ERFPR  --  ISSUE ERROR MESSAGE FOR .IOFPR (PRINT) ERROR
;ERFRN  --  ISSUE ERROR MESSAGE FOR .IOFRN (RENAME) ERROR
;ERFSU  --  ISSUE ERROR MESSAGE FOR .IOFSU (SUBMIT) ERROR
;Call is:
;
;	MOVX	M0,<COD>
;	MOVX	T1,<CDB>
;	PUSHJ	P,ERxxx
;	return always
;
;Where <COD> is the 18-bit status/exception/error code; and <CDB> is the
;associated I/O CDB (contains file name, etc).
;
;These routines issue a textual error message to the command terminal.
;
;Preserves all registers.


;ERPIN - Issue .IOPIN file-access error

	ENTRY	.ERPIN

.ERPIN:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\opening \]  ;OPEN-FOR-READ PARTICIPLE
	PJRST	ERFAE1		;GO FINISH OFF


;ERPOU - Issue .IOPOU file-access error

	ENTRY	.ERPOU

.ERPOU:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\creating \]  ;OPEN-FOR-WRITE PARTICIPLE
	PJRST	ERFAE1		;GO FINISH OFF
;ERFDL - Issue .IOFDL file-access error

	ENTRY	.ERFDL

.ERFDL:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\deleting \]  ;DELETE PARTICIPLE
	PJRST	ERFAE1		;GO FINISH OFF


;ERFPR - Issue .IOFPR file-access error

	ENTRY	.ERFPR

.ERFPR:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\printing \]  ;PRINT PARTICIPLE
	PJRST	ERFAE1		;GO FINISH OFF


;ERFRN - Issue .IOFRN file-access error

	ENTRY	.ERFRN

.ERFRN:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\renaming \]  ;RENAME PARTICIPLE
	PJRST	ERFAE1		;GO FINISH OFF


;ERFSU - Issue .IOFSU file-access error

	ENTRY	.ERFSU

.ERFSU:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\submitting \]  ;SUBMIT PARTICIPLE
	PJRST	ERFAE1		;GO FINISH OFF
;COMMON CODE FOR FILE ACCESS ERRORS
;
;AC usage is as follows:
;
;	P1	-1=fatal; 0=warning; 1=informational
;	P2	address of "participle" text string
;	P3	flags and address of reason text string

ERFAE1:	PUSHJ	P,.SACIO##	;SWITCH TO I/O CONTEXT
	PUSHJ	P,.SAVE4##	;SAVE THE PEAS
	PUSHJ	P,TSAV14##	;PROTECT CALLER'S T REGS
	MOVE	P2,M0		;POSITION PARTICIPLE TEXT STRING ADDRESS
	SETZ	P1,		;ASSUME MERELY A WARNING
	PUSHJ	P,ONERCK##	;SEE IF USER WANTS TO CONTINUE AFTERWARD
	SETO	P1,		;NO, FATAL ERROR
	MOVE	P4,.IOFSC(IO)	;ADDRESS OF FILE SPEC BLOCK
	DMOVE	T3,.FXMOD(P4)	;/OKPROT AND /OKNONE VALUES
	MOVE	T2,.IOERR(IO)	;FETCH ERROR CODE BACK
	CAIN	T2,$EFPRT	;"PROTECTION FAILURE" ?
	JRST	ERFA10		;YES, LOOK FOR /OKPROT
	CAIN	T2,$EFFNF	;"FILE NOT FOUND" ?
	JRST	ERFA20		;YES, LOOK FOR /OKNONE
	CAIE	T2,$EFDNF	;"DIRECTORY NOT FOUND"
	CAIN	T2,$EFSNF	;"SUBDIRECTORY NOT FOUND" ?
	JRST	ERFA20		;YES, LOOK FOR /OKNONE
	CAIN	T2,$EFUID	;"INVALID USERID"?
	JRST	ERFA33		;YES, LOOK FOR /OKUID
	JRST	ERFAE2		;PROCESS STANDARD ERROR MESSAGE


;PROTECTION FAILURE

ERFA10:	TXNE	T3,FX.PRT	;/OKPROT?
	MOVEI	P1,1		;YES, FLAG JUST AN INFORMATIONAL MESSAGE THEN
	JRST	ERFAE2		;PROCESS STANDARD ERROR MESSAGE

;FILE NOT FOUND

ERFA20:	TXNE	T3,FX.NOM	;/OKNONE?
	MOVEI	P1,1		;YES, FLAG JUST AN INFORMATIONAL MESSAGE
	JRST	ERFAE2		;PROCESS STANDARD ERROR MESSAGE

;INVALID USERID

ERFA33:	TXNE	T3,FX.UID	;/OKUID?
	MOVEI	P1,1		;YES, FLAG JUST AN INFORMATIONAL MESSAGE
	JRST	ERFAE2		;PROCESS STANDARD ERROR MESSAGE
;FIRST LOOK FOR SPECIAL-CASE TYPEOUT

ERFAE2:	JSP	T4,.CDISP##	;DISPATCH ON SPECIAL-CASE MESSAGES
		ERFX10,,$EFNLA	;NETWORK LINK ABORTED
		ERFX10,,$EINLA	;NETWORK LINK ABORTED (ALTERNATE)
		ERFX20,,$EERDE	;DAP PROTOCOL ERROR
		ERFX30,,$EFDAP	;BIZARRE DAP STATUS
		0		;NONE OTHERS
				;NO SPECIAL-CASE TYPEOUT NEEDED

;FIND THE GENERAL ERROR REASON TEXT AND FLAGS

ERFAE4:	MOVEI	T4,ERFTBL	;FILE ACCESS ERROR TABLE
	PUSHJ	P,.CFIND##	;FIND ENTRY FOR THIS ERROR
	 JRST	ERFAE6		;NOT A KNOWN/EXPECTED FILE ACCESS ERROR
	XMOVEI	P4,(T1)		;ADDRESS REASON TEXT AND FLAGS
	MOVE	P3,(P4)		;REASON CODE ADDRESS AND FLAGS
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.FAE		;FIRE UP A NIPFAE ERROR MESSAGE
	 PUSHJ	P,ERFAT		; FINISH OFF TEXT (FILE SPEC, ETC.)
	PJRST	EREXIT		;CAP OFF ERROR TEXT


;HERE FOR UNUSUAL ERROR/EXCEPTION CODE

ERFAE6:	MOVEI	T4,ERFTBU	;"UNUSUAL" ERROR TEXT TABLE
	PUSHJ	P,.CFIND##	;SEE IF KNOWN UNUSUAL ERROR
	 JRST	ERFAE8		;NO, UNKNOWN ERROR/EXCEPTION CODE
	XMOVEI	P4,(T1)		;ADDRESS OF FLG,,TEXT ADDRESS
	HLRE	P1,(P4)		;SET SEVERITY LEVEL
	HRRZ	T2,(P4)		;ADDRESS OF TEXT BODY
	PUSHJ	P,M.FAE		;NIPFAE ERROR MESSAGE
	 JFCL			;NOTHING MORE TO SAY HERE . . .
	PJRST	EREXIT		;CAP OFF THE ERROR/EXCEPTION TEXT

;HERE FOR UNKNOWN FILE ACCESS ERROR

ERFAE8:	MOVEI	T2,[ASCIZ\Unknown error/exception code = \]
	PUSHJ	P,M.FAE		;FIRE UP A NIPFAE ERROR MESSAGE
	 PUSHJ	P,[MOVE	T1,.IOERR(IO)	;FETCH THE UNKNOWN ERROR CODE
		PJRST	.TOCTW##]	;LIST IT (FOR WHAT IT'S WORTH)
	PJRST	EREXIT		;CAP OFF ERROR TEXT
;ERFX10 - SPECIAL CASE FOR "NETWORK LINK ABORTED"

ERFX10:	MOVE	P3,[EFF$NM![ASCIZ\Network link aborted (\]]
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.FAE		;FIRE UP A NIPFAE ERROR MESSAGE
	 CAIA			;FOLLOW UP ON TEXT
	JRST	EREXIT		;JUST <CR><LF> THE PREFIX
	PUSHJ	P,ERFAT		;DO MOST OF THE TEXT/FILE SPEC/ETC.
	MOVE	M0,.IOERR(IO)	;RETRIEVE BASE ERROR CODE AGAIN
	MOVEI	T4,ERFTBL	;GENERAL FILE-ACCESS ERROR TABLE
	CAIN	M0,$EINLA	;UNLESS "I/O" ERROR
	MOVEI	T4,ERITBL	;YEAH (E.G., TSK. "CONNECT REJECTED")
	SKIPE	T2,.IOER2(IO)	;PICK UP NETWORK ERROR "SUB-STATE"
	PUSHJ	P,.CFIND##	;GET SUB-REASON TEXT
	 MOVEI	T1,[[ASCIZ\Unknown/unspecified\]]
	HRRZ	T1,(T1)		;ADDRESS OF TEXT STRING
	PUSHJ	P,.TSTRG##	;ISSUE SUB-STATE ERROR TEXT
	PUSHJ	P,.TRPRN##	;TYPE THE CLOSING ")"
	PJRST	EREXIT		;CAP OFF ERROR MESSAGE


;ERFX20 - SPECIAL CASE FOR "DAP PROTOCOL ERROR"

ERFX20:	MOVE	P3,[EFF$ND![ASCIZ\Remote-detected DAP protocol error\]]
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.FAE		;FIRE UP A NIPFAE ERROR MESSAGE
	 CAIA			;FOLLOW-UP ON TEXT
	JRST	EREXIT		;JUST <CR><LF> THE PREFIX
	PUSHJ	P,ERFAT		;DO MOST OF THE TEXT/FILE SPEC/ETC.
	PUSHJ	P,ERDE01	;LIST DAP PROTOCOL ERROR STUFF
	JRST	EREXIT		;CAP OFF ERROR MESSAGE


;ERFX30 - SPECIAL CASE FOR "BIZARRE DAP STATUS"

ERFX30:	MOVE	P3,[EFF$ND![ASCIZ\Bizarre DAP error status\]]
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.FAE		;FIRE UP A NIPFAE ERROR MESSAGE
	 CAIA			;FOLLOW-UP ON TEXT
	JRST	EREXIT		;JUST <CR><LF> THE PREFIX
	PUSHJ	P,ERFAT		;DO MOST OF THE TEXT/FILE SPEC/ETC.
	PUSHJ	P,EDAP01	;PRINT THE OFFENDING STATUS
	JRST	EREXIT		;CAP OFF ERROR MESSAGE
;HERE FOR TYPING THE JUICY STUFF

ERFAT:	MOVE	T1,P2		;THE PARTICIPLE STRING ADDRESS
	PUSHJ	P,.TSTRG##	;TYPE THAT OUT
;RDH	MOVEI	T1,[ASCIZ\file \]  ;ASSUME STANDARD FILE ACCESS
	SETZ	T1,		;RDH  KEEP MESSAGES SHORT
	TXNN	P3,FX.UNM	;WANT NAME TYPED OUT?
	MOVEI	T1,[ASCIZ\directory \]  ;NO, ESCALATE MESSAGE
	TXNN	P3,FX.UDR	;WANT DIRECTORY TYPED OUT?
	MOVEI	T1,[ASCIZ\device \]  ;NO, ESCALATE MESSAGE
	TXNN	P3,FX.UDV	;WANT DEVICE TYPED OUT?
	MOVEI	T1,[ASCIZ\node \]  ;NO, ESCALATE MESSAGE
	CAIE	T1,0		;RDH  KEEP MESSAGES SHORT
	PUSHJ	P,.TSTRG##	;ISSUE NEXT PART OF MESSAGE
	MOVE	T2,P3		;COPY OF FLAGS
	ANDX	T2,FX.UXX	;REDUCE TO JUST FLAGS
	PUSHJ	P,TOCFS0##	;TYPE OUT FILE SPEC
	 JFCL			;DUH???
	MOVEI	T1,[ASCIZ\, \]	;SEPARATOR
	PUSHJ	P,.TSTRG##	;SEPARATE FILE SPEC FROM REASON TEXT
	HRRZ	T1,P3		;ADDRESS OF REASON TEXT STRING
	PJRST	.TSTRG##	;CAP OFF ERROR MESSAGE
;HERE TO ISSUE NIPFAE ERROR MESSAGE
;Call is:
;
;	MOVEI	T2,<TXT>
;	PUSHJ	P,M.FAE
;	 FIRST return
;	NOTEXT return
;
;Where <TXT> is the address of the text string to start up the error.
;
;M.FAE will print a NIPFAE error/warning/informational message. Register
;P1 is assumed to be the severity flag (-1 fatal; 0 warning; 1 informational)
;for the message. M.FAE only starts the message, the caller is responsible
;for terminating the message (i.e., the trailing ,<CR><LF>).
;
;On "FIRST" return, the user should append any subsidiary text desired to
;the basic text (such as typing the error code, file spec, etc.).
;
;On "NOTEXT" return, no further text should be typed, the message should
;immediately be finished (e.g., /MESSAGE:(PREFIX,NOFIRST)).
;
;Uses T1, T2, T3, T4

M.FAE:	MOVE	T1,['NIP',,'FAE']  ;MODULE AND MESSAGE CODES
	HRL	T2,[EXP "?", "%", "["]+1(P1)  ;SEVERITY LEVEL
	MOVE	T3,.IOERR+1(IO)	;ADDRESS(+1) OF CALLER
	PUSHJ	P,.ERMSA##	;FIRE UP AN ERROR MESSAGE
	TXNN	T1,JWW.FL	;WANT "FIRST" LINE TEXT
	 AOS	(P)		;NO, JUST .TCRLF IT
	POPJ	P,		;RETURN AS NEEDED.
;ERFTBL - STANDARD FILE ACCESS ERROR TABLE

DEFINE	X(COD, FLG, TXT),<XWD [FLG![ASCIZ\TXT\]],COD>

EFF$ND==FX.UND			;WANT NODE TYPED
EFF$DV==EFF$ND!FX.UDV		;WANT NODE::DEV:
EFF$DR==EFF$DV!FX.UDR		;WANT NODE::DEV:[DIR]
EFF$NM==EFF$DR!FX.UNM!FX.UEX!FX.UGN  ;WANT NODE::DEV:[DIR]NAM.EXT.GEN


ERFTBL:	X	$EFFNF,EFF$NM,<File not found>
	X	$EFDNF,EFF$NM,<Directory not found>
	X	$EFPRT,EFF$NM,<Protection failure>
	X	$EFFBM,EFF$NM,<File in use by other user>
	X	$EFAEF,EFF$NM,<Already existing file>
	X	$EFISU,EFF$NM,<Illegal sequence of UUOs>
	X	$EFRIB,EFF$NM,<RIB or directory read error>
	X	$EFNSF,EFF$NM,<Not a SAVE file>
	X	$EFNEC,EFF$NM,<Not enough core (memory)>
	X	$EFDNA,EFF$DV,<Device not available>
	X	$EFNSD,EFF$DV,<No such device>
	X	$EFILU,EFF$NM,<Illegal monitor call>
	X	$EFNRM,EFF$NM,<Device quota or storage exhausted>
	X	$EFWLK,EFF$DV,<Device is write-locked>
	X	$EFTBL,EFF$NM,<System capacity exceeded>
	X	$EFPOA,EFF$NM,<Partial allocation>
	X	$EFBNF,EFF$NM,<Block not free>
	X	$EFCSD,EFF$NM,<Can't supersede a directory file>
	X	$EFDNE,EFF$NM,<Can't delete non-empty directory file>
	X	$EFSNF,EFF$NM,<Sub-directory not found>
	X	$EFSLE,EFF$DV,<Search list empty>
	X	$EFLVL,EFF$NM,<Sub-directory nesting level exceeded>
	X	$EFNCE,EFF$NM,<NO-CREATE on for entire search list>
	X	$EFSNS,EFF$NM,<Segment not on swap space or job locked>
	X	$EFFCU,EFF$NM,<Can't update file>
	X	$EFLOH,EFF$NM,<Loseg overlaps hiseg>
	X	$EFNLI,EFF$NM,<Illegal if not logged-in>
	X	$EFFLK,EFF$NM,<File is "locked" by another user>
	X	$EFBED,EFF$NM,<Bad .EXE file directory>
	X	$EFBEE,EFF$NM,<Bad .EXE file extension>
	X	$EFDTB,EFF$NM,<Directory too big for .EXE file>
	X	$EFENC,EFF$DV,<Exceeded network capacity>
	X	$EFTNA,EFF$DV,<Task device not available>
;	X	$EFNSN,EFF$DV,<Undefined node name>
	X	$EFSIU,EFF$NM,<Sub-directory in use>
	X	$EFNDR,EFF$NM,<File has NO-DELETE set>
	X	$EFJCH,EFF$NM,<File has too many users>
	X	$EFSSL,EFF$NM,<Can't rename SFD to lower level>
	X	$EFCNO,EFF$NM,<I/O Channel not OPENed for access>
	X	$EFDDU,EFF$DV,<Device "down" and unuseable>
	X	$EFDRS,EFF$DV,<Device is restricted>
	X	$EFDCM,EFF$DV,<Device is controlled by the MDA process>
	X	$EFDAJ,EFF$DV,<Device is assigned to another job>
	X	$EFIDM,EFF$NM,<Illegal device data mode>
	X	$EFUOB,EFF$NM,<Undefined OPEN flags>
	X	$EFDUM,EFF$DV,<Device in use on MPX channel>
	X	$EFNPC,EFF$NM,<No per-process space for I/O channel table>
	X	$EFNFC,EFF$NM,<No free I/O channels>
	X	$EFUFF,EFF$NM,<Unknown FILOP. function>
	X	$EFCTB,EFF$NM,<Channel too big>
	X	$EFCIF,EFF$NM,<Channel illegal for specified function>
	X	$EFACR,EFF$NM,<Address check reading argument block>
	X	$EFACS,EFF$NM,<Address check writing argument block>
	X	$EFNZA,EFF$NM,<Negative or zero argument block length>
	X	$EFATS,EFF$NM,<Argument block too short>

	X	$EFRAE,EFF$NM,<Unspecified remote file access error>
	X	$EFRNS,EFF$NM,<Remote does not support requested action>
	X	$EFRNR,EFF$NM,<Remote does not support RENAME>
	X	$EFRND,EFF$NM,<Remote does not support DELETE>
	X	$EFRNX,EFF$NM,<Remote does not support EXECUTE>
	X	$EFRNL,EFF$NM,<Remote does not support DIRECTORY LIST>
	X	$EFRNW,EFF$NM,<Remote does not support wildcards>
	X	$EFRNC,EFF$NM,<Remote does not support file constraints>
	X	$EFRNG,EFF$NM,<Remote does not support GO/NOGO>
	X	$EFRNA,EFF$NM,<Remote does not support ACCOMP(RENAME)>
	X	$EFRFB,EFF$NM,<File spec string too big for DAP protocol>
	X	$EFRSB,EFF$NM,<String argument too big for DAP protocol>

	X	$EFABE,EFF$ND,<Argument block format error>
	X	$EFALF,EFF$ND,<Allocation failure>
	X	$EFBCN,EFF$ND,<Bad channel number>
	X	$EFBFT,EFF$ND,<Bad format type in process block>
	X	$EFCFE,EFF$ND,<Connect block format error>
	X	$EFIDL,EFF$ND,<Interrupt data too long>
	X	$EFIFM,EFF$ND,<Illegal flow control mode>
	X	$EFILF,EFF$ND,<Illegal NSP. function>
	X	$EFJQX,EFF$ND,<Job quota exceeded>
	X	$EFLQX,EFF$ND,<Link quota exceeded>
	X	$EFNCD,EFF$ND,<No connect data>
	X	$EFPIO,EFF$ND,<NSP Percentage input out of bounds>
	X	$EFPRV,EFF$ND,<Network privileges required>
	X	$EFSTB,EFF$ND,<NSP segment size too big>
	X	$EFNSN,EFF$ND,<No such node>
	X	$EFUXS,EFF$ND,<Unexpected NSP state: unspecified>
	X	$EFWNA,EFF$ND,<Wrong number of arguments>
	X	$EFWRS,EFF$ND,<Network link in wrong state>
	X	$EFCBL,EFF$ND,<NSP connect block length error>
	X	$EFPBL,EFF$ND,<NSP process block length error>
	X	$EFSBL,EFF$ND,<NSP string block length error>
	X	$EFUDS,EFF$ND,<Unexpected NSP state: disconnect sent>
	X	$EFUDC,EFF$ND,<Unexpected NSP state: disconnect confirmed>
	X	$EFUCF,EFF$ND,<Network link aborted ("No confidence")>
	X	$EFULK,EFF$ND,<Network link aborted ("No link")>
	X	$EFUCM,EFF$ND,<Network link aborted ("No communication")>
	X	$EFUNR,EFF$ND,<Unexpected NSP state: no resources>
	X	$EFRBO,EFF$ND,<Aborted by object>
	X	$EFDBO,EFF$ND,<Disconnected by object>
	X	$EFRES,EFF$ND,<Remote system resources exhausted>
	X	$EFUXN,EFF$ND,<Unknown remote object name>
	X	$EFRNS,EFF$ND,<Remote node is shutting down>
	X	$EFURO,EFF$ND,<No remote network (DAP) file service>
	X	$EFIOF,EFF$ND,<Connect rejected: illegal object format>
	X	$EFOTB,EFF$ND,<Remote network file service busy/full>
	X	$EFABM,EFF$ND,<Connect rejected: aborted by management>
	X	$EFABO,EFF$ND,<Remote network file service aborted network link>
	X	$EFINF,EFF$ND,<Connect rejected: invalid node name format>
	X	$EFLNS,EFF$ND,<Local host network shutting down>
	X	$EFUID,EFF$ND,<Invalid USERID and/or PASSWORD>
	X	$EFNRO,EFF$ND,<Remote network file service did not respond>
	X	$EFNUR,EFF$ND,<Node unreachable>
	X	$EFNLK,EFF$ND,<No link>
	X	$EFDSC,EFF$ND,<Disconnect complete>
	X	$EFIMG,EFF$ND,<Image field error>
	X	$EFUAC,EFF$ND,<Invalid ACCOUNT>
	X	$EFBCF,EFF$ND,<Illegal NS.EOM and NS.WAI>
	X	$EFADE,EFF$ND,<NSP. UUO address check>

	X	$EFRJU,EFF$NM,<Rejected by user>
	X	$EFIXN,EFF$NM,<No more files>
	X	$EFIXE,EFF$NM,<No more files (redundantly)>
	X	$EFNAD,EFF$DV,<Device not a disk>
	X	$EFIFO,EFF$NM,<Illegal file operation>
	X	$EFIFM,EFF$NM,<Illegal file mode>
	X	$EFILI,EFF$DV,<Illegal input, output device only>
	X	$EFILO,EFF$DV,<Illegal output, input device only>
	X	$EFISW,EFF$NM,<Illegal secondary wildcarding>
	X	$EFVBI,EFF$DV,<Variable blocksize illegal>
	X	$EFBTB,EFF$DV,<Blocksize too big>
	X	$EFBTS,EFF$DV,<Blocksize too small>
	X	$EFFUL,EFF$NM,<Device full - storage exhausted>
	X	$EFQTA,EFF$NM,<Device quota exhausted>
	X	$EFDIF,EFF$NM,<Directory full or can't create unique name>
	0
;ERFTBU - UNUSUAL FILE ACCESS ERROR TABLE

DEFINE	X(COD, FLG, TXT),<XWD [FLG![ASCIZ\TXT\]],COD>

EFF$FT==777777000000		;FATAL ERROR
EFF$WR==000000000000		;WARNING
EFF$IN==000001000000		;INFORMATIONAL


ERFTBU:	X	$EERSP,EFF$IN,<Aborting network/DAP link due to remote screwy DAP protocol>
	0
;COMMON ERROR EXIT


EREXIT:	CAIN	P1,1		;IS THIS AN INFORMATIONAL MESSAGE?
	PUSHJ	P,.TRBRK##	;YES, ISSUE CLOSING "]"
	PUSHJ	P,.TCRLF##	;CAP OFF MESSAGE WITH A <CR><LF>
	MOVE	M0,.IOERR(IO)	;RESTORE EXCEPTION CODE
	POPJ	P,		;RETURN
	SUBTTL	Error messages - I/O errors

;ERISR  --  ISSUE ERROR MESSAGE FOR .IOISR (INPUT) ERROR
;EROSR  --  ISSUE ERROR MESSAGE FOR .IOOSR (OUTPUT) ERROR
;Call is:
;
;	MOVX	M0,<COD>
;	MOVX	T1,<CDB>
;	PUSHJ	P,ERxxx
;	return always
;
;Where <COD> is the 18-bit status/exception/error code; and <CDB> is the
;associated I/O CDB (contains file name, etc).
;
;These routines issue a textual error message to the command terminal.
;
;Preserves all registers.


;ERISR - Issue .IOISR I/O error

	ENTRY	.ERISR

.ERISR:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\reading \]  ;INPUT PARTICIPLE
	PJRST	ERIOE1		;GO FINISH OFF


;EROSR - Issue .IOOSR I/O error

	ENTRY	.EROSR

.EROSR:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\Writing \]  ;OUTPUT PARTICIPLE
	PJRST	ERIOE1		;GO FINISH OFF
;COMMON CODE FOR I/O ERRORS
;
;AC usage is as follows:
;
;	P1	-1=fatal; 0=warning; 1=informational
;	P2	address of "participle" text string
;	P3	flags and address of reason text string

ERIOE1:	PUSHJ	P,.SACIO##	;SWITCH TO I/O CONTEXT
	PUSHJ	P,.SAVE4##	;SAVE THE PEAS
	PUSHJ	P,TSAV14##	;PROTECT CALLER'S T REGS
	MOVE	P2,M0		;POSITION PARTICIPLE TEXT STRING ADDRESS
	SETZ	P1,		;ASSUME MERELY A WARNING
	PUSHJ	P,ONERCK##	;SEE IF USER WANTS TO CONTINUE AFTERWARD
	SETO	P1,		;NO, FATAL ERROR
	MOVE	P4,.IOFSC(IO)	;ADDRESS OF FILE SPEC BLOCK
	DMOVE	T3,.FXMOD(P4)	;/OKPROT AND /OKNONE VALUES
	MOVE	T2,.IOERR(IO)	;FETCH ERROR CODE BACK

;FIRST CHECK FOR SPECIAL-CASE I/O ERROR MESSAGE

ERIOE2:	JSP	T4,.CDISP##	;DISPATCH ON SPECIAL-CASE ERROR MESSAGE
		ERIX10,,$EINLA	;NETWORK LINK ABORTED
		ERIX20,,$EERDE	;REMOTE-DETECTED DAP PROTOCOL ERROR
		ERIX30,,$EIDAP	;BIZARRE DAP STATUS
		0		;NONE OTHERS
				;NOT A SPECIAL-CASE ERROR TYPEOUT

;FIND THE GENERAL ERROR REASON TEXT AND FLAGS

ERIOE4:	MOVEI	T4,ERITBL	;I/O ERROR TABLE
	PUSHJ	P,.CFIND##	;FIND ENTRY FOR THIS ERROR
	 JRST	ERIOE6		;NOT A KNOWN/EXPECTED I/O ERROR
	XMOVEI	P4,(T1)		;ADDRESS REASON TEXT AND FLAGS
	MOVE	P3,(P4)		;REASON CODE ADDRESS AND FLAGS
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.IOE		;FIRE UP A NIPIOE ERROR MESSAGE
	 PUSHJ	P,ERIOT		; FINISH OFF TEXT (FILE SPEC, ETC.)
	PJRST	EREXIT		;CAP OFF ERROR TEXT

;HERE FOR UNUSUAL ERROR/EXCEPTION CODE

ERIOE6:	MOVEI	T4,ERITBU	;"UNUSUAL" ERROR TEXT TABLE
;	PUSHJ	P,.CFIND##	;SEE IF KNOWN UNUSUAL ERROR
;	 JRST	ERIOE8		;NO, UNKNOWN ERROR/EXCEPTION CODE
;	XMOVEI	P4,(T1)		;ADDRESS OF FLG,,TEXT ADDRESS
;	HLRE	P1,(P4)		;SET SEVERITY LEVEL
;	HRRZ	T2,(P4)		;ADDRESS OF TEXT BODY
;	PUSHJ	P,M.IOE		;NIPIOE ERROR MESSAGE
;	 JFCL			;NOTHING MORE TO SAY HERE . . .
;	PJRST	EREXIT		;CAP OFF THE ERROR/EXCEPTION TEXT

;HERE FOR UNKNOWN I/O ERROR

ERIOE8:	MOVEI	T2,[ASCIZ\Unknown error/exception code = \]
	PUSHJ	P,M.IOE		;FIRE UP A NIPIOE ERROR MESSAGE
	 PUSHJ	P,[MOVE	T1,.IOERR(IO)	;FETCH THE UNKNOWN ERROR CODE
		PJRST	.TOCTW##]	;LIST IT (FOR WHAT IT'S WORTH)
	PJRST	EREXIT		;CAP OFF ERROR TEXT
;ERIX10 - SPECIAL CASE FOR "NETWORK LINK ABORTED"

ERIX10:	MOVE	P3,[EFF$NM![ASCIZ\Network link aborted (\]]
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.IOE		;FIRE UP A NIPIOE ERROR MESSAGE
	 CAIA			;FOLLOW-UP ON TEXT
	JRST	EREXIT		;JUST <CR><LF> THE PREFIX
ERIX14:	PUSHJ	P,ERIOT		;DO MOST OF THE TEXT/FILE SPEC/ETC.
	MOVEI	T4,ERITBL	;GENERAL I/O ERROR TABLE
	SKIPE	T2,.IOER2(IO)	;PICK UP NETWORK ERROR "SUB-STATE"
	PUSHJ	P,.CFIND##	;GET SUB-REASON TEXT
	 MOVEI	T1,[[ASCIZ\Unknown/unspecified\]]
	HRRZ	T1,(T1)		;ADDRESS OF TEXT STRING
	PUSHJ	P,.TSTRG##	;ISSUE SUB-STATE ERROR TEXT
	PUSHJ	P,.TRPRN##	;TYPE THE CLOSING ")"
	PJRST	EREXIT		;CAP OFF ERROR MESSAGE


;ERIX20 - SPECIAL CASE FOR "DAP PROTOCOL ERROR"

ERIX20:	MOVEI	P3,[ASCIZ\Remote-detected DAP protocol error\]
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.IOE		;FIRE UP A NIPIOE ERROR MESSAGE
	 CAIA			;FOLLOW-UP ON TEXT
	JRST	EREXIT		;JUST <CR><LF> THE PREFIX
	PUSHJ	P,ERIOT		;DO MOST OF THE TEXT/FILE SPEC/ETC.
	PUSHJ	P,ERDE01	;LIST DAP PROTOCOL ERROR STUFF
	JRST	EREXIT		;CAP OFF ERROR MESSAGE


;ERIX30 - SPECIAL CASE FOR "BIZARRE DAP STATUS"

ERIX30:	MOVEI	P3,[ASCIZ\Bizarre DAP error status\]
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.IOE		;FIRE UP A NIPIOE ERROR MESSAGE
	 CAIA			;FOLLOW-UP ON TEXT
	JRST	EREXIT		;JUST <CR><LF> THE PREFIX
	PUSHJ	P,ERIOT		;DO MOST OF THE TEXT/FILE SPEC/ETC.
	PUSHJ	P,EDAP01	;PRINT THE OFFENDING STATUS
	JRST	EREXIT		;CAP OFF ERROR MESSAGE
;HERE FOR TYPING THE JUICY STUFF

ERIOT:	MOVE	T1,P2		;THE PARTICIPLE STRING ADDRESS
	PUSHJ	P,.TSTRG##	;TYPE THAT OUT
;RDH	MOVEI	T1,[ASCIZ\file \]  ;ASSUME STANDARD FILE
;RDH	PUSHJ	P,.TSTRG##	;ISSUE NEXT PART OF MESSAGE
	MOVX	T2,FX.UXX	;LIST EVERYTHING WE CAN
	SKIPE	T3,.I1NOD(IO)	;GET NODE NAME (SIXBIT)
				;  USE .I1NOD 'CUZ .ION6M ZEROED BY SOME ERRORS
	CAMN	T3,.MYNOD##	;IF LOCAL NODE
	TXZ	T2,FX.UND	;THEN DON'T TYPE OUT THE NODE NAME
	PUSHJ	P,TOCFS0##	;TYPE OUT FILE SPEC
	 JFCL			;DUH???
	MOVEI	T1,[ASCIZ\, \]	;SEPARATOR
	PUSHJ	P,.TSTRG##	;SEPARATE FILE SPEC FROM REASON TEXT
	HRRZ	T1,P3		;ADDRESS OF REASON TEXT STRING
	PJRST	.TSTRG##	;CAP OFF ERROR MESSAGE
;HERE TO ISSUE NIPIOE ERROR MESSAGE
;Call is:
;
;	MOVEI	T2,<TXT>
;	PUSHJ	P,M.IOE
;	 FIRST return
;	NOTEXT return
;
;Where <TXT> is the address of the text string to start up the error.
;
;M.IOE will print a NIPIOE error/warning/informational message. Register
;P1 is assumed to be the severity flag (-1 fatal; 0 warning; 1 informational)
;for the message. M.IOE only starts the message, the caller is responsible
;for terminating the message (i.e., the trailing ,<CR><LF>).
;
;On "FIRST" return, the user should append any subsidiary text desired to
;the basic text (such as typing the error code, file spec, etc.).
;
;On "NOTEXT" return, no further text should be typed, the message should
;immediately be finished (e.g., /MESSAGE:(PREFIX,NOFIRST)).
;
;Uses T1, T2, T3, T4

M.IOE:	MOVE	T1,['NIP',,'IOE']  ;MODULE AND MESSAGE CODES
	HRL	T2,[EXP "?", "%", "["]+1(P1)  ;SEVERITY LEVEL
	MOVE	T3,.IOERR+1(IO)	;ADDRESS(+1) OF CALLER
	PUSHJ	P,.ERMSA##	;FIRE UP AN ERROR MESSAGE
	TXNN	T1,JWW.FL	;WANT "FIRST" LINE TEXT
	 AOS	(P)		;NO, JUST .TCRLF IT
	POPJ	P,		;RETURN AS NEEDED.
;ERITBL - STANDARD I/O ERROR TABLE

DEFINE	X(COD, FLG, TXT),<XWD [FLG![ASCIZ\TXT\]],COD>


ERITBL:	X	$EIEOF,0,<End of file>
	X	$EIDEV,0,<Hard device error>
	X	$EIDAT,0,<Data checksum or parity error>
	X	$EIBKT,0,<Data block too large for data buffer>
	X	$EIIMP,0,<Software-detected operational error>
	X	$EIFUL,0,<Device full -  storage exhausted>
	X	$EIQTA,0,<User quota exceeded>
	X	$EIHWL,0,<Device is hardware write-locked>
	X	$EISWL,0,<Device is software write-locked>
	X	$EIEOV,0,<End-of-volume detected>
	X	$EIOFL,0,<Device is offline>
	X	$EILLE,0,<Lineprinter page limit exceeded>
	X	$EIVFE,0,<Lineprinter VFU format error>
	X	$EILUC,0,<Lineprinter undefined character interrupt>
	X	$EIVRP,0,<Lineprinter VFU RAM parity error>
	X	$EILBL,0,<Tape label error>
	X	$EICNO,0,<Channel not OPEN for file or I/O activity>
	X	$EIECF,0,<Error CLOSEing channel>
	X	$EINBI,0,<Non-blocking input>
	X	$EINBO,0,<Non-blocking output>
	X	$EILSN,0,<Line sequence number detected>
	X	$EILLN,0,<Ludicrous line sequence number detected>
	X	$EIEFL,0,<EOF while reading line sequence number>
	X	$EIMLN,0,<Multiple line sequence numbers detected>
	X	$EINOL,0,<File not OPENed for line sequence number generation>
	X	$EILTB,0,<Line sequence number too big>
	X	$EIINO,0,<File not OPENed for input>
	X	$EIONO,0,<File not OPENed for output>
	X	$EIILF,0,<Illegal I/O operation (.IOFUN call)>
	X	$EIBOR,0,<Begining of record encountered>
	X	$EIRSU,0,<Begining of record encountered, size unknown>
	X	$EIEOR,0,<Premature end of record (record size too large)>
	X	$EIDPR,0,<Data past end of record (record size too small)>
	X	$EIRFE,0,<Record format error>
	X	$EICCC,0,<Error in COBOL carriage control format>
	X	$EIFCC,0,<Error in FORTRAN carriage control format>
	X	$EIPRN,0,<Error in VAX "print file" control format>
	X	$EINRS,0,<Not a record-structured file>
	X	$EINIR,0,<Not in a record (record not initialized)>
	X	$EIRSO,0,<Record still outstanding (previous record not done)>
	X	$EIRTB,0,<Record size too big>
	X	$EIRAI,0,<Record address illegal>

	X	$EIDAP,0,<Bizarre (not-readily-translatable) DAP status code>
	X	$EIRIE,0,<Unspecified remote I/O error>
	X	$EICKE,0,<Network file data CRC ("checksum") error>
	X	$EINTI,0,<Non-blocking network input>
	X	$EINTO,0,<Non-blocking network output>
	X	$EIBAI,0,<Illegal ASCII record attributes for IMAGE/BINARY data>
	X	$EINLA,0,<Network link aborted>
	X	$EINMP,0,<Network message pending input>

	X	$EIABE,0,<Argument block format error>
	X	$EIALF,0,<Allocation failure>
	X	$EIBCN,0,<Bad channel number>
	X	$EIBFT,0,<Bad format type in process block>
	X	$EICFE,0,<Connect block format error>
	X	$EIIDL,0,<Interrupt data too long>
	X	$EIIFM,0,<Illegal flow control mode>
	X	$EIILF,0,<Illegal NSP. function>
	X	$EIJQX,0,<Job quota exceeded>
	X	$EILQX,0,<Link quota exceeded>
	X	$EINCD,0,<No connect data>
	X	$EIPIO,0,<NSP Percentage input out of bounds>
	X	$EIPRV,0,<Network privileges required>
	X	$EISTB,0,<NSP segment size too big>
	X	$EINSN,0,<No such node>
	X	$EIUXS,0,<Unexpected NSP state: unspecified>
	X	$EIWNA,0,<Wrong number of arguments>
	X	$EIWRS,0,<Network link in wrong state>
	X	$EICBL,0,<NSP connect block length error>
	X	$EIPBL,0,<NSP process block length error>
	X	$EISBL,0,<NSP string block length error>
	X	$EIUDS,0,<Unexpected NSP state: disconnect sent>
	X	$EIUDC,0,<Unexpected NSP state: disconnect confirmed>
	X	$EIUCF,0,<"No confidence">
	X	$EIULK,0,<"No link">
	X	$EIUCM,0,<"No communication">
	X	$EIUNR,0,<Unexpected NSP state: no resources>
	X	$EIRBO,0,<Aborted by object>
	X	$EIDBO,0,<Disconnected by object>
	X	$EIRES,0,<Connect rejected: no resources>
	X	$EIUXN,0,<Connect rejected: unknown object name>
	X	$EIRNS,0,<Connect rejected: node is shutting down>
	X	$EIURO,0,<Connect rejected: unknown object type>
	X	$EIIOF,0,<Connect rejected: illegal object format>
	X	$EIOTB,0,<Connect rejected: no free objects>
	X	$EIABM,0,<Connect rejected: aborted by management>
	X	$EIABO,0,<Aborted by object>
	X	$EIINF,0,<Connect rejected: invalid node name format>
	X	$EILNS,0,<Connect rejected: local net shutting down>
	X	$EIUID,0,<Connect rejected: invalid userid>
	X	$EINRO,0,<Connect rejected: no response from object>
	X	$EINUR,0,<Node unreachable>
	X	$EINLK,0,<No link>
	X	$EIDSC,0,<Disconnect complete>
	X	$EIIMG,0,<Image field too long>
	X	$EIUAC,0,<Invalid ACCOUNT>
	X	$EIBCF,0,<Illegal NS.EOM and NS.WAI>
	X	$EIADE,0,<NSP. UUO address check>
	0
;ERITBU - UNUSUAL I/O ERROR TABLE

DEFINE	X(COD, FLG, TXT),<XWD [FLG![ASCIZ\TXT\]],COD>

EFF$FT==777777000000		;FATAL ERROR
EFF$WR==000000000000		;WARNING
EFF$IN==000001000000		;INFORMATIONAL


ERITBU:	0
	0
	SUBTTL	Error messages - Special DAP routines

;ERDE - TYPE OUT A "REMOTE-DETECTED DAP PROTOCOL ERROR"

ERDE01:	PUSHJ	P,.TCRLF##	;CAP OFF FIRST LINE OF TEXT
	MOVEI	T1,[ASCIZ\    DAP status = \]
	PUSHJ	P,.TSTRG##	;START UP EXTENDED TEXT BLAB
	MOVE	T1,.IDSTC(IO)	;GET DAP STATUS VALUE
	PUSHJ	P,.TOCTW##	;LIST IT IN OCTAL
	MOVEI	T1,[ASCIZ\; Secondary status = \]
	PUSHJ	P,.TSTRG##	;IDENTIFY SECONDARY STATUS
	DMOVE	T1,.IDSTV(IO)	;FETCH SECONDARY STATUS VALUE (DOUBLE-WORD)
	PUSHJ	P,.TOCTD##	;LIST IT IN OCTAL

;Now list the MACCODE error class

ERDE10:	PUSHJ	P,.TCRLF##	;CAP OFF FIRST EXTENDED TEXT LINE
	MOVEI	T1,[ASCIZ\    DAP error class is "\]
	PUSHJ	P,.TSTRG##	;START UP A LINE OF TEXT
	LDB	T1,PDPEMA##	;GET DAP STATUS "MACCODE"
	MOVE	T1,ERDETB(T1)	;GET APPROPRIATE TEXT STRING
	PUSHJ	P,.TSTRG##	;AND LIST THE MAJOR ERROR CLASS
	PUSHJ	P,.TDQTE##	;CAP OFF QUOTED STRING

;Now try for the specific message type in error

ERDE20:	PUSHJ	P,.TCRLF##	;CAP OFF SECOND EXTENDED TEXT LINE
	LDB	P1,PDPEMT##	;GET DAP MESSAGE TYPE
	LDB	P2,PDPEMF##	;GET DAP FIELD CODE
	JUMPN	P1,ERDE23	;GO IF NOT A "MISCELLANEOUS" ERROR
	MOVE	T2,P2		;POSITION "FIELD" CODE
	MOVEI	T4,[[ASCIZ\    Unspecified DAP message error\],,00
		    [ASCIZ\    Unknown DAP message type\],,10
		    0]		;TEXT POSSIBILITIES
	PUSHJ	P,.CFIND##	;TRY FOR VIABLE TEXT
	 MOVEI	T1,[ASCIZ\    Unknown "miscellaneous" DAP error code\]
	PUSHJ	P,.TSTRG##	;PUNT TEXT AND
	JRST	ERDE50		;EXIT THIS VALE OF TEARS

ERDE23:	MOVEI	T1,[ASCIZ\    DAP message type is "\]
	PUSHJ	P,.TSTRG##	;START UP MESSAGE TYPE LINE
	MOVEI	T4,DAPIDX##	;DAP EXECUTION TABLE INDEXER
	MOVE	T2,P1		;RETRIEVE DAP MESSAGE TYPE
	CAIG	T2,$DHACL	;CODE THAT SEEMS TO PARALLEL MESSAGE CODES?
	PUSHJ	P,.CFIND##	;YES, TRY TO FIND MATCHING MESSAGE TYPE
	 TDZA	P3,P3		;CAN'T IDENTIFY THE MESSAGE TYPE
	SKIPA	P3,T1		;REMEMBER EXECUTION TABLE INDEX
	SKIPA	T1,[[ASCIZ\<<unknown>>\]]  ;CAN'T IDENTIFY IT
	MOVE	T1,DAPXTX(T1)	;MATCHED, GET MESSAGE TEXTUAL DESCRIPTION
ERDE29:	PUSHJ	P,.TSTRG##	;IDENTIFY MESSAGE TYPE THAT DIED
	PUSHJ	P,.TDQTE##	;TYPE CLOSING DOUBLE-QUOTE
	CAIGE	P2,20		;UNLESS ERROR IN DAP MESSAGE HEADER FIELD,
	JUMPE	P3,ERDE50	;CAN GO NO FURTHER IF UNKNOWN MESSAGE TYPE

;Now identify message field within message type that died

ERDE30:	PUSHJ	P,.TCRLF##	;CAP OFF SECOND EXTENDED TEXT LINE
	MOVEI	T1,[ASCIZ\    DAP message field is "\]
	PUSHJ	P,.TSTRG##	;START UP MESSAGE FIELD LINE
	JUMPN	P2,ERDE33	;TRACK DOWN OFFENDING FIELD IF PRESENT
ERDE32:	MOVEI	T1,[ASCIZ\<<unknown>>\]  ;UNKNOWN FIELD
	JRST	ERDE39		;TYPE THAT OUT

ERDE33:	CAIGE	P2,20		;ERROR IN HEADER OR MESSAGE FIELD?
	TDZA	P3,P3		;HEADER, FLAG PROTOTYPE TEMPLATE
	SUBI	P2,10		;OFFSET MESSAGE FIELD TYPE
	SUBI	P2,07		;OFFSET MESSAGE HEADER TYPE
	ADD	P3,P2		;POINT P3 AT DAPXCT TABLE ENTRY FOR FIELD
	LDB	T2,[POINTR DAPXCT(P3),DX$COD]  ;GET RELATIVE FIELD NUMBER
	CAME	T2,P2		;THIS THE FIELD?
	JRST	ERDE32		;NO, THEN WE DON'T KNOW THE FIELD
	MOVE	T1,DAPXTX(P3)	;YES, GET FIELD TEXT BLURB
ERDE39:	PUSHJ	P,.TSTRG##	;AND TYPE IT OUT
	PUSHJ	P,.TDQTE##	;CAP OFF THE QUOTED FIELD STRING

;List the status text field if the remote it

ERDE50:	MOVE	T1,.IODPV(IO)	;GET DAP PROTOCOL VERSION
	CAIL	T1,007000	;VERSION 7.0 OR LATER?
	SKIPN	.IDSTX(IO)	;YES, GOT A STATUS TEXT FIELD TO TYPE?
	JRST	ERDE90		;NO, ALL DONE
	PUSHJ	P,.TCRLF##	;FINISH OFF TEXT
	MOVEI	T1,[ASCIZ\    DAP status text is "\]
	PUSHJ	P,.TSTRG##	;FIRE UP YET ANOTHER LINE
	MOVEI	T1,.IDSTX(IO)	;ADDRESS OF ARBITRARY STATUS TEXT STRING
	PUSHJ	P,.TSTRG##	;TYPE IT OUT TOO
	PUSHJ	P,.TDQTE##	;CAP OFF QUOTED STRING

;All done here

ERDE90:	POPJ	P,		;JUST RETURN
;DAP ERROR CLASS TABLE

ERDETB:	[ASCIZ\Operation in progress\]
	[ASCIZ\Operation successful\]
	[ASCIZ\Operation or value unsupported\]
	[ASCIZ\<<reserved>>\]
	[ASCIZ\File OPEN operation\]
	[ASCIZ\I/O transfer\]
	[ASCIZ\I/O transfer (warning)\]
	[ASCIZ\File CLOSE operation\]
	[ASCIZ\DAP message syntax error\]
	[ASCIZ\DAP message field error\]
	[ASCIZ\DAP message out of synchronization\]
	[ASCIZ\<<reserved>>\]
	[ASCIZ\<<reserved>>\]
	[ASCIZ\<<reserved>>\]
	[ASCIZ\<<User-defined MACCODE = 16>>\]
	[ASCIZ\<<User-defined MACCODE = 17>>\]
;EDAP - TYPE OUT A "BIZARRE DAP STATUS"

EDAP01:	PUSHJ	P,.TCRLF##	;CAP OFF FIRST LINE OF TEXT
	MOVEI	T1,[ASCIZ\    DAP status = \]
	PUSHJ	P,.TSTRG##	;START UP EXTENDED TEXT BLAB
	MOVE	T1,.IDSTC(IO)	;GET DAP STATUS VALUE
	PUSHJ	P,.TOCTW##	;LIST IT IN OCTAL
	MOVEI	T1,[ASCIZ\; Secondary status = \]
	PUSHJ	P,.TSTRG##	;IDENTIFY SECONDARY STATUS
	DMOVE	T1,.IDSTV(IO)	;FETCH SECONDARY STATUS VALUE (DOUBLE-WORD)
	PUSHJ	P,.TOCTD##	;LIST IT IN OCTAL

;Now list the MACCODE error class

EDAP10:	PUSHJ	P,.TCRLF##	;CAP OFF FIRST EXTENDED TEXT LINE
	MOVEI	T1,[ASCIZ\    DAP error class is "\]
	PUSHJ	P,.TSTRG##	;START UP A LINE OF TEXT
	LDB	T1,PDPEMA	;GET DAP STATUS "MACCODE"
	MOVE	T1,ERDETB(T1)	;GET APPROPRIATE TEXT STRING
	PUSHJ	P,.TSTRG##	;AND LIST THE MAJOR ERROR CLASS
	PUSHJ	P,.TDQTE##	;FINISH QUOTED ERROR CLASS STRING

;Now list the MICCODE error reason

EDAP20:	PUSHJ	P,.TCRLF##	;FINISH OFF SECOND LINE TEXT
	MOVEI	T1,[ASCIZ\    DAP status meaning is "\]
	PUSHJ	P,.TSTRG##	;FIRE UP ANOTHER LINE
	MOVEI	T4,DAPSTS##	;THE DAP STATUS TABLE
	LDB	T2,PDPEMI##	;EXTRACT FULL MICCODE VALUE
	PUSHJ	P,.CFIND##	;MATCH STATUS CODE
	 MOVEI	T1,[ASCIZ\<<unknown>>\]  ;HOHUM
	PUSHJ	P,.TSTRG##	;LIST THE STATUS TEXT
	PUSHJ	P,.TDQTE##	;CAP OFF EXTENDED MESSAGE

;Now list the status text field, if any

EDAP30:	MOVE	T1,.IODPV(IO)	;GET DAP PROTOCOL VERSION
	CAIL	T1,007000	;VERSION 7.0 OR LATER?
	SKIPN	.IDSTX(IO)	;YES, GOT A STATUS TEXT FIELD TO TYPE?
	JRST	EDAP90		;NO, ALL DONE
	PUSHJ	P,.TCRLF##	;FINISH OFF THIRD LINE TEXT
	MOVEI	T1,[ASCIZ\    DAP status text is "\]
	PUSHJ	P,.TSTRG##	;FIRE UP YET ANOTHER LINE
	MOVEI	T1,.IDSTX(IO)	;ADDRESS OF STATUS TEXT STRING
	PUSHJ	P,.TSTRG##	;TYPE IT OUT TOO
	PUSHJ	P,.TDQTE##	;CAP OFF QUOTED STRING

;All done here

EDAP90:	POPJ	P,		;RETURN NOT <CR><LF>'ED
	SUBTTL	Error messages - QUEUE/GALAXY related

;ERQUE  --  ISSUE ERROR MESSAGE FOR .QUEOP (QUEUE/GALAXY) ERROR
;Call is:
;
;	MOVX	M0,<COD>
;	MOVX	T1,<CDB>
;	PUSHJ	P,ERQUE
;	return always
;
;Where <COD> is the 18-bit status/exception/error code; and <CDB> is the
;associated I/O CDB (contains file name, etc).
;
;This routine issues a textual error message to the command terminal.
;
;Preserves all registers.


	ENTRY	.ERQUE

.ERQUE:	MOVEM	M0,.IOERR(T1)	;PROTECT THE ERROR CODE
	MOVE	M0,0(P)		;CALLER'S PC (+1)
	MOVEM	M0,.IOERR+1(T1)	;SAVE ADDRESS TOO
	XMOVEI	M0,[ASCIZ\queueing \]  ;QUEUEING PARTICIPLE

;AC usage is as follows:
;
;	P1	-1=fatal; 0=warning; 1=informational
;	P2	address of "participle" text string
;	P3	flags and address of reason text string

ERQUE1:	PUSHJ	P,.SACIO##	;SWITCH TO I/O CONTEXT
	PUSHJ	P,.SAVE4##	;SAVE THE PEAS
	PUSHJ	P,TSAV14##	;PROTECT CALLER'S T REGS
	MOVE	P2,M0		;POSITION PARTICIPLE TEXT STRING ADDRESS
	SETZ	P1,		;ASSUME MERELY A WARNING
	PUSHJ	P,ONERCK##	;SEE IF USER WANTS TO CONTINUE AFTERWARD
	SETO	P1,		;NO, FATAL ERROR
	MOVE	P4,.IOFSC(IO)	;ADDRESS OF FILE SPEC BLOCK
ERQUE2:	MOVEI	T4,ERQTBL	;QUEUE ERROR TABLE
	PUSHJ	P,.CFIND##	;FIND ENTRY FOR THIS ERROR
	 JRST	ERQUE4		;NOT A KNOWN/EXPECTED QUEUE ERROR
	XMOVEI	P4,(T1)		;ADDRESS REASON TEXT AND FLAGS
	MOVE	P3,(P4)		;REASON CODE ADDRESS AND FLAGS
	MOVEI	T2,[ASCIZ\Error \]  ;BASIC TEXT
	PUSHJ	P,M.QUE		;FIRE UP A NIPQUE ERROR MESSAGE
	 PUSHJ	P,ERFAT		; FINISH OFF TEXT (FILE SPEC, ETC.)
	PJRST	EREXIT		;CAP OFF ERROR TEXT


;HERE FOR UNUSUAL ERROR/EXCEPTION CODE

ERQUE4:	MOVEI	T4,ERQTBU	;"UNUSUAL" ERROR TEXT TABLE
	PUSHJ	P,.CFIND##	;SEE IF KNOWN UNUSUAL ERROR
	 JRST	ERQUE6		;NO, TRY FOR SPECIAL CASES
	XMOVEI	P4,(T1)		;ADDRESS OF FLG,,TEXT ADDRESS
	HLRE	P1,(P4)		;SET SEVERITY LEVEL
	HRRZ	T2,(P4)		;ADDRESS OF TEXT BODY
	PUSHJ	P,M.QUE		;NIPFAE ERROR MESSAGE
	 JFCL			;NOTHING MORE TO SAY HERE . . .
	PJRST	EREXIT		;CAP OFF THE ERROR/EXCEPTION TEXT


;HERE TO LOOK FOR SPECIAL CASES

ERQUE6:	JSP	T4,.CDISP##	;DISPATCH ON SPECIAL-CASE MESSAGES
		0		;NONE OTHERS
				;FALL INTO ERQUE8


;HERE FOR UNKNOWN QUEUE ERROR

ERQUE8:	MOVEI	T2,[ASCIZ\Unknown error/exception code = \]
	PUSHJ	P,M.QUE		;FIRE UP A NIPQUE ERROR MESSAGE
	 PUSHJ	P,[MOVE	T1,.IOERR(IO)	;FETCH THE UNKNOWN ERROR CODE
		PJRST	.TOCTW##]	;LIST IT (FOR WHAT IT'S WORTH)
	PJRST	EREXIT		;CAP OFF ERROR TEXT
;HERE TO ISSUE NIPQUE ERROR MESSAGE
;Call is:
;
;	MOVEI	T2,<TXT>
;	PUSHJ	P,M.QUE
;	 FIRST return
;	NOTEXT return
;
;Where <TXT> is the address of the text string to start up the error.
;
;M.QUE will print a NIPQUE error/warning/informational message. Register
;P1 is assumed to be the severity flag (-1 fatal; 0 warning; 1 informational)
;for the message. M.QUE only starts the message, the caller is responsible
;for terminating the message (i.e., the trailing ,<CR><LF>).
;
;On "FIRST" return, the user should append any subsidiary text desired to
;the basic text (such as typing the error code, file spec, etc.).
;
;On "NOTEXT" return, no further text should be typed, the message should
;immediately be finished (e.g., /MESSAGE:(PREFIX,NOFIRST)).
;
;Uses T1, T2, T3, T4

M.QUE:	MOVE	T1,['NIP',,'QUE']  ;MODULE AND MESSAGE CODES
	HRL	T2,[EXP "?", "%", "["]+1(P1)  ;SEVERITY LEVEL
	MOVE	T3,.IOERR+1(IO)	;ADDRESS(+1) OF CALLER
	PUSHJ	P,.ERMSA##	;FIRE UP AN ERROR MESSAGE
	TXNN	T1,JWW.FL	;WANT "FIRST" LINE TEXT
	 AOS	(P)		;NO, JUST .TCRLF IT
	POPJ	P,		;RETURN AS NEEDED.
;ERQTBL - STANDARD QUEOP ERROR TABLE

ERQTBL:	X	$EQIAL,EFF$NM,<QUEUE. Illegal argument list>
	X	$EQILF,EFF$NM,<QUEUE. Illegal function>
	X	$EQNFS,EFF$NM,<QUEUE. No monitor free core>
	X	$EQADC,EFF$NM,<QUEUE. Address check>
	X	$EQCNR,EFF$NM,<QUEUE. Componet not running (no PID)>
	X	$EQFER,EFF$NM,<QUEUE. Fatal error returned from ORION>
	X	$EQSOC,EFF$NM,<QUEUE. Invalid message from ORION>
	X	$EQNPV,EFF$NM,<QUEUE. Privilege violation>

	X	$EQPAC,EFF$NM,<SPPRM. Address check>
	X	$EQPIA,EFF$NM,<SPPRM. Illegal arg list length>
	X	$EQPID,EFF$NM,<SPPRM. Illegal device>
	X	$EQPNA,EFF$NM,<SPPRM. Device not OPENed>
	X	$EQPNS,EFF$NM,<SPPRM. Device is not spooled>
	X	$EQPNC,EFF$NM,<SPPRM. No monitor free core>
	X	$EQPIF,EFF$NM,<SPPRM. Illegal function>
	0



;ERQTBU - UNUSUAL QUEOP ERROR TABLE

ERQTBU:	0
	SUBTTL	Error message processor

;ERMSX  --  OUTPUT ERROR MESSAGE BASED ON ERROR/STATUS CODE
;CALL IS:
;
;	MOVEI	M0,<STS>
;	MOVX	T1,<CDB>
;	PUSHJ	P,ERMSX
;	 error return
;	normal return
;
;Where <STS> is the generic program status code (as defined in the
;definitions module ND); and <CDB> is the address of the associated
;I/O CDB, if appropriate.
;
;On "error" return the "process" cannot be continued (e.g., network
;link died, program stopcode, etc.).
;
;On normal return a textual message has been generated and issued to
;the "command terminal".
;
;ERMSX does not attempt any type of error-correction activity, that is
;left to the caller's discretion - all ERMSX does is try to tell the
;"user" exactly what is "going on".
;
;Preserves all acs (even M0!)

	ENTRY	.ERMSX
	INTERN	ERMSX0,	ERMSX1

.ERMSX:	PUSHJ	P,.SACIO##	;SET UP I/O CDB INDEX, JUST IN CASE
ERMSX0:
ERMSX1:	PUSHJ	P,.SAVE4##	;SAVE THE P'S
	PUSHJ	P,TSAV14##	;SAVE THE T'S ON G.P.S
	PUSH	P,M0		;SAVE EVEN M0!
	SETZ	T1,		;NO "OUTPUT" SPEC HERE
	MOVE	T2,IO		;ALWAYS AN "INPUT" SPEC
	PUSHJ	P,IOQET1##	;MAKE SURE FILE SPEC HAS BEEN "TELL"'ED
	 JFCL			;DUH??
	MOVE	 M0,0(P)	;RESTORE ORIGINAL ERROR CODE
	PUSHJ	P,EMSG		;GENERATE THE TEXT
	 SOS	-1(P)		;NON-SKIP RETURN
	POP	P,M0		;RESTORE M0
	JRST	.POPJ1##	;AND SKIP [MAYBE] RETURN
;DO THE REAL WORK OF ERMSX

EMSG:	MOVE	T2,M0		;POSITION 18-BIT CODE
	ANDX	T2,$E$ERR	;AND REDUCE IT TO ITS FUNCTIONAL GROUPING
	JSP	T4,.CDISP##	;AND DISPATCH ON FUNCTIONAL GROUPING
		ESTS,,$E$STS	;GENERAL STATUS
		EFIL,,$E$FIL	;FILE ACCESS ERROR
		EIOX,,$E$IOX	;I/O TRANSMISSION ERROR
		EDAT,,$E$DAT	;DATA FORMAT
		EENV,,$E$ENV	;ENVIRONMENTAL ERROR
		EMEM,,$E$MEM	;MEMORY MANAGEMENT
		EMSC,,$E$MSC	;MISCELLANEOUS
		ECTL,,$E$CTL	;INTERNAL FLOW CONTROL
		EDIE,,$E$DIE	;INTERNAL PROGRAM ERROR
		0		;END OF TABLE

;UNKNOWN STATUS CODE

EMSG10:	MOVEI	T1,[ASCIZ\? Unknown status/error code \]

;TEMP TYPER

EMSG20:	PUSH	P,M0		;SAVE 18-BIT CODE
	PUSHJ	P,.TSTRG##	;TYPE TEXT
	POP	P,T1		;POSITION 18-BIT CODE
	PUSHJ	P,.TOCTW##	;AND TYPE IT TOO
	PJRST	.TCRLF##	;CAP IT OFF AND ABORT
;GENERAL STATUS

ESTS:	MOVEI	T1,[ASCIZ\? General status code \]
	JRST	EMSG20		;ISSUE SOMETHING
;FILE ACCESS ERROR

EFIL:	MOVE	T2,M0		;ERROR CODE
	JSP	T4,.CDISP##	;DISPATCH ON ERROR TYPE
		EFDAP,,$EFDAP	;DAP FILE ACCESS ERROR
		0		;THAT'S IT
	MOVEI	T1,[ASCIZ\? File access error \]
	JRST	EMSG20		;ISSUE SOMETHING


;UNSPECIFIED DAP FILE ACCESS ERROR

EFDAP:	MOVEI	T1,[ASCIZ\? DAP-level file access error \]
	PUSHJ	P,.TSTRG##	;START UP MESSAGE
	LDB	T1,[POINT 12,.IDSTC(IO),35]  ;DAP STATUS MICCODE FIELD
	PUSHJ	P,.TOCTW##	;LIST OCTAL REASON
	MOVEI	T1,[ASCIZ\; \]
	PUSHJ	P,.TSTRG##	;TYPE OUT SEPARATOR
	LDB	T2,[POINT 12,.IDSTC(IO),35]  ;DAP MICCODE FIELD AGAIN
	MOVEI	T4,DAPSTS##	;DAP STATUS CODES TABLE
	PUSHJ	P,.CFIND##	;SEE IF IT IS KNOWN TO US
	 JRST	[MOVEI	T1,[ASCIZ\Unknown DAP status "MICCODE" value\]
		CAIN	T2,0		;"UNSPECIFIED ERROR"
		MOVEI	T1,[ASCIZ\Unspecified error\]
		JRST	.+1]		;ISSUE SOMETHING
	PUSHJ	P,.TSTRG##	;TYPE OUT TEXT
	PUSHJ	P,.TCRLF##	;CAP OFF WITH A <CR><LF>
	SKIPN	.IDSTV+1(IO)	;SOMETHING FUNNY PASSED ALSO?
	JRST	.POPJ1##	;NO, ALL DONE
	MOVEI	T1,[ASCIZ\  Secondary status value = \]
	PUSHJ	P,.TSTRG##	;YES, TELL USER THAT TOO
	MOVE	T1,.IDSTV+1(IO)	;RETRIEVE LOW-ORDER WORD
	PUSHJ	P,.TOCTW##	;BLAST IT OUT IN OCTAL
	PUSHJ	P,.TCRLF##	;CAP OFF SECONDARY STATUS
	JRST	.POPJ1##	;AND RETURN
;I/O TRANSMISSION ERROR

EIOX:	CAIN	M0,$EICKE	;CRC ERROR
	JRST	EIOCKE		;YES
	MOVEI	T1,[ASCIZ\? I/O transmission error \]
	JRST	EMSG20		;ISSUE SOMETHING


;CRC ("CHECKSUM") ERROR

EIOCKE:	MOVEI	T1,[ASCIZ\? Network file data CRC ("checksum") error \]
	PUSHJ	P,.TSTRG##	;TELL USER OF WOE
	PJRST	.TCRLF##	;CAP IT OFF
;DATA FORMAT ERROR

EDAT:	MOVEI	T1,[ASCIZ\? Data format error \]
	JRST	EMSG20		;ISSUE SOMETHING
;ENVIRONMENTAL ERRORS

EENV:	MOVE	T2,M0		;RETRIEVE ERROR
	JSP	T4,.CDISP##	;DISPATCH ON ERROR TYPE
		EERDE,,$EERDE	;REMOTE-DETECTED DAP ERROR
		0		;END OF TABLE
	MOVEI	T1,[ASCIZ\? Environmental error \]
	JRST	EMSG20		;ISSUE SOMETHING


;ENVIRONMENTAL ERROR - REMOTE DETECTED DAP ERROR

EERDE:	MOVEI	T1,[ASCIZ\? Remote-detected DAP-level error: \]
	PUSHJ	P,.TSTRG##	;START UP THE OUTPUT
	LDB	T2,[POINT 4,.IDSTC(IO),23]  ;GET DAP MAJOR CLASS
	MOVEI	T4,[
		[ASCIZ\unsupported function\],,2
		[ASCIZ\bad message syntax\],,10
		[ASCIZ\message field invalid\],,11
		0]		;TEXT POSSIBILITIES
	PUSHJ	P,.CFIND##	;FIND MAJOR ERROR
	 MOVEI	T1,[ASCIZ\ UNKNOWN\]  ;DUH?
	PUSHJ	P,.TSTRG##	;LIST MAJOR ERROR
	PUSHJ	P,.TCRLF##	;START UP A NEW LINE
	LDB	P1,[POINT 6,.IDSTC(IO),29]  ;GET DAP MESSAGE CODE
	LDB	P2,[POINT 6,.IDSTC(IO),35]  ;GET DAP FIELD CODE
	JUMPN	P1,EERDE4	;PROCESS NORMAL ERROR
	MOVE	T2,P2		;SUB-MICCODE FIELD
	MOVEI	T4,[
		[ASCIZ\	Unspecified DAP message error\],,00
		[ASCIZ\	Unknown DAP message type\],,10
		0]		;TEXT POSSIBILITIES
	PUSHJ	P,.CFIND##	;LOOK FOR VIABLE TEXT
	 MOVEI	T1,[ASCIZ\	Unknown "miscellaneous" DAP error code\]
	PUSHJ	P,.TSTRG##	;TYPE OUT NEAR-USLESS MESSAGE
	JRST	EERDE9		;AND EXIT THIS VALE OF TEARS

;ERROR IS IN THE DAP MESSAGE

EERDE4:	MOVEI	T1,[ASCIZ\	Error detected in DAP "\]
	PUSHJ	P,.TSTRG##	;PREFIX MESSAGE CODE
	CAIG	P1,20		;ONE THAT SEEMS TO PARALLEL ACTUAL MSG CODE?
	SKIPA	T2,P1		;YES
	SETO	T2,		;NO
	MOVEI	T4,DAPIDX##	;DAP EXECUTION TABLE INDEXER
	PUSHJ	P,.CFIND##	;TRY TO FIND A MATCHING MESSAGE TYPE
	 SETO	T1,		;NONE? OH WELL, WE DID TRY!
	MOVE	P1,T1		;HANG ON TO INDEX
	CAIL	T1,0		;DID MESSAGE CODE GEL?
	SKIPA	T1,DAPXTX##(T1)	;YES, GET APPROPRIATE TEXT
	MOVEI	T1,[ASCIZ\UNKNOWN\]  ;DUH?
	PUSHJ	P,.TSTRG##	;LIST ENGLISH MESSAGE CODE DESCRIPTION
	MOVEI	T1,[ASCIZ\" message; \]
	PUSHJ	P,.TSTRG##	;DELIMIT MESSAGE TYPE
	JUMPL	P1,EERDE9	;CAN'T DO ANYMORE HERE
	JUMPE	P2,[MOVEI T1,[ASCIZ\Unknown field present\]
		JRST	EERDE7]	;GO BARF AT USER
	CAIGE	P2,20		;ERROR IN DAP MESSAGE HEADER?
	SETZ	P1,		;YES, RESET TO USE HEADER TEMPLATE TEXT
	MOVE	T2,P2		;SCRATCH COPY TO USE AS INDEX
	CAIL	P2,20		;ERROR IN DAP MESSAGE FIELD?
	SUBI	T2,10		;YES
	SUBI	T2,7		;REDUCE TO FIELD ID
	JUMPGE	T2,EERDE6	;GO LIST FIELD BY NAME
EERDE5:	MOVEI	T1,[ASCIZ\(Unknown DAP error field indicator "\]
	PUSHJ	P,.TSTRG##	;TYPE OUT
	MOVE	T1,P2		;FIELD INDICATOR
	PUSHJ	P,.TSTRG##	;TYPE THAT TOO
	MOVEI	T1,[ASCIZ\")\]
	PUSHJ	P,.TSTRG##	;CAP OFF UNKNOWN WHATEVER
	JRST	EERDE9		;GO BARF AT USER

EERDE6:	MOVE	T1,P1		;DAP INDEX
	ADD	T1,T2		;RELOCATE TO SPECIFIC FIELD COMPONET
	LDB	T3,[POINTR DAPXCT##(T1),DX$COD]  ;FETCH FIELD NUMBER WITHIN MSG
	CAME	T2,T3		;FIELDS MATCH?
	JRST	EERDE5		;NO (????)
	MOVE	P1,DAPXTX##(T1)	;GET TEXTUAL NAME OF FIELD
	MOVEI	T1,""""		;QUOTE THE FIELD NAME
	PUSHJ	P,.TCHAR##	; . . .
	MOVE	T1,P1		;ADDRESS OF FIELD NAME STRING
EERDE7:	PUSHJ	P,.TSTRG##	;TYPE IT OUT
	MOVEI	T1,[ASCIZ\" field.\]
	PUSHJ	P,.TSTRG##	;CAP OFF FIELD NAME MESSAGE
EERDE9:	PUSHJ	P,.TCRLF##	;END LINE
	JRST	.POPJ1##	;RETURN
;MEMORY MANAGEMENT ERRORS

EMEM:	MOVEI	T1,[ASCIZ\? Memory management error \]
	JRST	EMSG20		;ISSUE SOMETHING
;MISCELLANEOUS

EMSC:	MOVEI	T1,[ASCIZ\? Miscellaneous status/error \]
	JRST	EMSG20		;ISSUE SOMETHING
;INTERNAL FLOW CONTROL

ECTL:	MOVEI	T1,[ASCIZ\? Internal flow control code \]
	JRST	EMSG20		;ISSUE SOMETHING
;INTERNAL PROGRAM ERROR

EDIE:	MOVEI	T1,[ASCIZ\? Internal program error \]
	JRST	EMSG20		;ISSUE SOMETHING
	END