Google
 

Trailing-Edge - PDP-10 Archives - bb-r775c-bm_tops20_ks_upd_3 - sources/scrfcurs.bli
There are 10 other files named scrfcurs.bli in the archive. Click here to see a list.
 %TITLE 'SCRFCURS - absolute cursor position'
MODULE SCRFCURS (				! Absolute cursor position
		IDENT = '3-002'			! File: SCRFCURS.BLI Edit: CJG3002
		) =
BEGIN
!
!			  COPYRIGHT (c) 1981, 1985 BY
!	      DIGITAL EQUIPMENT CORPORATION, MAYNARD, MASS.
!		ALL RIGHTS RESERVED.
!
! THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND  COPIED
! ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH  LICENSE AND WITH THE
! INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR  ANY  OTHER
! COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
! OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE  SOFTWARE  IS  HEREBY
! TRANSFERRED.
!
! THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE  WITHOUT  NOTICE
! AND  SHOULD  NOT  BE  CONSTRUED  AS  A COMMITMENT BY DIGITAL EQUIPMENT
! CORPORATION.
!
! DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF  ITS
! SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.
!

!++
! FACILITY:	EDT -- The DEC Standard Editor
!
! ABSTRACT:
!
!	This module forces an absolute cursor position sequence to a specified
!	line and position to be placed in the formatted output buffer.
!
! ENVIRONMENT:	Runs at any access mode - AST reentrant
!
! AUTHOR: Bob Kushlis, CREATION DATE: September 8, 1979
!
! MODIFIED BY:
!
! 1-001	- Original.  DJS 12-Feb-1981.  This module was created by
!	extracting the routine EDT$$SC_POSABS  from module SCREEN.
! 1-002	- Regularize headers.  JBS 13-Mar-1981
! 1-004	- Output a CR before positioning to the last column, to defeat
!	   autowrap.  JBS 16-Apr-1982
! 1-005	- Remove edit 1-004, since it doesn't help on a VT100, and use
!	   a shorter sequence to position to home.  JBS 07-Oct-1982
! 1-006	- Don't allow negative cursor locations.  JBS 10-Oct-1982
! 1-007	- Preserve FMT_LNPOS, it may be modified by EDT$$FMT_DCML.  JBS 28-Oct-1982
! 3-002 - Modify ASSERT macro to include error code. CJG 30-Jan-1984
!--

%SBTTL 'Declarations'
!
! TABLE OF CONTENTS:
!

REQUIRE 'EDTSRC:TRAROUNAM';

FORWARD ROUTINE
    EDT$$SC_POSABS : NOVALUE;

!
! INCLUDE FILES:
!

REQUIRE 'EDTSRC:EDTREQ';

!
! MACROS:
!
!	NONE
!
! EQUATED SYMBOLS:
!
!	NONE
!
! OWN STORAGE:
!
!	NONE
!
! EXTERNAL REFERENCES:
!
!	In the routine
%SBTTL 'EDT$$SC_POSABS  - absolute cursor position'

GLOBAL ROUTINE EDT$$SC_POSABS (			! Absolute cursor position
    LINE, 					! Desired line
    POS						! Desired column
    ) : NOVALUE =

!++
! FUNCTIONAL DESCRIPTION:
!
!	This routine forces a cursor position sequence to the specified line
!	and position to be placed in the formatted output buffer.
!
!	The new line and position are saved in PRV_LN  and
!	PRV_COL for use by future positions.
!
! FORMAL PARAMETERS:
!
!  LINE			Desired line number
!
!  POS			Desired column number
!
! IMPLICIT INPUTS:
!
!	TI_TYP
!
! IMPLICIT OUTPUTS:
!
!	PRV_LN
!	PRV_COL
!
! ROUTINE VALUE:
!
!	NONE
!
! SIDE EFFECTS:
!
!	NONE
!
!--

    BEGIN

    EXTERNAL ROUTINE
	EDT$$STORE_FMTCH : NOVALUE,	! Store a character in the format buffer
	EDT$$FMT_DCML : NOVALUE;	! Expand a number in decimal into the format buffer

    EXTERNAL
	PRV_LN,				! Previous line number.
	PRV_COL,			! Previous column number.
	TI_TYP,				! Terminal type.
	FMT_LNPOS;			! Column number for formatting purposes

    LOCAL
	SAVE_FMTLNPOS;

!+
! The line and position parameters must not be negative.
!-
    ASSERT (21, .LINE GEQ 0);
    ASSERT (21, .POS GEQ 0);
!+
! Preserve FMT_LNPOS, since the call to EDT$$FMT_DCML will modify it,
! but those characters do not really increment the column.
!-
    SAVE_FMTLNPOS = .FMT_LNPOS;
!+
! Always start with an escape.
!-
    EDT$$STORE_FMTCH (ASC_K_ESC);
!+
! If this is a VT100, the escape is always followed by a [, to make a CSI.
!-

    IF (.TI_TYP EQL TERM_VT100) THEN EDT$$STORE_FMTCH (%C'[');

!+
! If we are positioning to home, use the shorter sequence.
!-

    IF ((.LINE EQL 0) AND (.POS EQL 0))
    THEN
	BEGIN
	EDT$$STORE_FMTCH (%C'H');
	PRV_LN = .LINE;
	PRV_COL = .POS;
	FMT_LNPOS = .SAVE_FMTLNPOS;
	RETURN;
	END;

!+
! We are not positioning to home, use the longer sequence.
!-

    IF (.TI_TYP EQL TERM_VT52)
    THEN
	BEGIN
	EDT$$STORE_FMTCH (%C'Y');
	EDT$$STORE_FMTCH (.LINE + 32);
	EDT$$STORE_FMTCH (.POS + 32);
	PRV_LN = .LINE;
	PRV_COL = .POS;
	FMT_LNPOS = .SAVE_FMTLNPOS;
	RETURN;
	END;

    ASSERT (5, .TI_TYP EQL TERM_VT100);

    IF (.LINE NEQ 0) THEN EDT$$FMT_DCML (.LINE + 1);

    IF (.POS NEQ 0)
    THEN
	BEGIN
	EDT$$STORE_FMTCH (%C';');
	EDT$$FMT_DCML (.POS + 1);
	END;

    EDT$$STORE_FMTCH (%C'H');
    PRV_LN = .LINE;
    PRV_COL = .POS;
    FMT_LNPOS = .SAVE_FMTLNPOS;
    END;					! of routine EDT$$SC_POSABS

!<BLF/PAGE>
END						! of module SCRFCRUS

ELUDOM