Google
 

Trailing-Edge - PDP-10 Archives - bb-h138f-bm - 7-sources/xpndis.b36
There are 25 other files named xpndis.b36 in the archive. Click here to see a list.
%TITLE 'XPNDIS - Disconnect a logical link'
MODULE xpndis (
               ENTRY ( XPN$DISCONNECT ),
               IDENT = '1'
              ) =
BEGIN
!
!
!	COPYRIGHT (C) DIGITAL EQUIPMENT CORPORATION 1981, 1986.
!	ALL RIGHTS RESERVED.
!
!	THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED  AND
!	COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE AND WITH
!	THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS  SOFTWARE  OR
!	ANY  OTHER  COPIES  THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE
!	AVAILABLE TO ANY OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF  THE
!	SOFTWARE IS HEREBY TRANSFERRED.
!
!	THE INFORMATION IN THIS SOFTWARE IS  SUBJECT  TO  CHANGE  WITHOUT
!	NOTICE  AND  SHOULD  NOT  BE CONSTRUED AS A COMMITMENT BY DIGITAL
!	EQUIPMENT CORPORATION.
!
!	DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR  RELIABILITY  OF
!	ITS SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
!

!++
! FACILITY:
!   Transportable BLISS interface to DECNET-20.
!
! ABSTRACT:
!   This module contains the code to implement the $XPN_DISCONNECT macro.
!
! ENVIRONMENT:
!   TOPS-20 user mode.
!
! AUTHOR:  Larry Campbell, CREATION DATE:  January 11, 1982
!
! MODIFIED BY: Andrew Nourse 10-Jul-84
!
!    01 - Make Connect reject actually reject the connection
!
!--
!
! TABLE OF CONTENTS:
!
FORWARD ROUTINE
    xpn$disconnect,                     ! Called by $XPN_DISCONNECT macro
    xpn$$disconnect;                    ! Does the actual work
!
! INCLUDE FILES:
!
LIBRARY 'BLI:XPORT';
LIBRARY 'BLISSNET';
LIBRARY 'BLI:MONSYM';
LIBRARY 'BLISSNET20';
REQUIRE 'JSYSDEF';
!
! MACROS:
!

!
! EQUATED SYMBOLS:
!

!
! OWN STORAGE:
!
PSECT OWN=$HIGH$;

OWN xdnull: $XPN_DESCRIPTOR();          ! Null XPN descriptor

!
! EXTERNAL REFERENCES:
!

EXTERNAL ROUTINE
    xpn$$valid_nlb,                     ! Validate an NLB
    xpn$$link_status;                   ! Read link status
GLOBAL ROUTINE xpn$disconnect (nlb, success_routine, failure_routine) =
!++
! FUNCTIONAL DESCRIPTION:
!   This routine is called by the $XPN_DISCONNECT macro to disconnect
!   a logical link.
!
! FORMAL PARAMETERS:
!   nlb                 - address of the Network Link Block
!   success_routine     - (optional) routine to call on success
!   failure_routine     - (optional) routine to call on failure
!
! IMPLICIT INPUTS:
!   NONE
!
! IMPLICIT OUTPUTS:
!   NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
!   NONE
!
! SIDE EFFECTS:
!   NONE
!
!--
    BEGIN

    MAP
        nlb : REF $XPN_NLB();

    LOCAL
        original_primary_code,
        primary_code,
        secondary_code,
        retcode;

    nlb_binds;                          ! create nice names for NLB fields
    !
    ! validate the NLB
    !
    retcode = xpn$$valid_nlb (.nlb);
    IF NOT .retcode THEN
        BEGIN
        original_primary_code = XPN$_BAD_NLB;
        secondary_code = .retcode
        END
    ELSE
        BEGIN
	original_primary_code = xpn$$disconnect (.nlb);
        nlb[NLB$G_COMP_CODE] = .original_primary_code;
        secondary_code = .nlb[NLB$G_2ND_CODE]
        END;
    !
    ! Check completion code and call success or failure routine as required
    !
    IF .original_primary_code THEN
        IF .success_routine NEQ 0 THEN
            primary_code =
                (.success_routine) (XPN$K_DISCONNECT, .original_primary_code,
                    .secondary_code, .nlb)
        ELSE
            primary_code = .original_primary_code
    ELSE
        IF .failure_routine NEQ 0 THEN
            primary_code =
                (.failure_routine) (XPN$K_DISCONNECT, .original_primary_code,
                    .secondary_code, .nlb)
        ELSE
            primary_code = .original_primary_code;
    !
    ! Unless the NLB was bad, store the completion code there
    !
    IF .original_primary_code NEQ XPN$_BAD_NLB
    THEN
        nlb[NLB$G_COMP_CODE] = .primary_code;
    RETURN (.primary_code)
    END;			!End of xpn$disconnect
ROUTINE xpn$$disconnect (p_nlb) =
!++
! FUNCTIONAL DESCRIPTION:
!   This routine does the actual work of disconnecting a logical link.
!
! FORMAL PARAMETERS:
!   p_nlb           - pointer to the Network Link Block
!
! IMPLICIT INPUTS:
!   NONE
!
! IMPLICIT OUTPUTS:
!   NONE
!
! ROUTINE VALUE and
! COMPLETION CODES:
!   NONE
!
! SIDE EFFECTS:
!   NONE
!
!--
    BEGIN

    BIND
        nlb = .p_nlb : $XPN_NLB (),
        output_descriptor = 
          (IF .nlb[NLB$A_OUTPUT] NEQ 0
           THEN .nlb[NLB$A_OUTPUT]
           ELSE xdnull)           : $XPO_DESCRIPTOR ();

    LOCAL
	link_status,
        b;

    nlb_binds;                          ! Get concise names for popular fields

    IF NOT .nlb[NLB$V_OPEN]             ! Make sure we opened it
    THEN
        RETURN (XPN$_NOT_OPEN);

    link_status = xpn$$link_status (nlb);       ! What state are we in ?

    IF .nlb[NLB$B_SUBFUNC] EQL NLB$K_REJECT
    THEN
        BEGIN
        !
        ! Connect Reject:
        ! Ensure that this is a passive link with conn req pending
        !
        IF NOT passive
        THEN
            RETURN (XPN$_ILLOGIC);

        IF (.link_status AND MO_WCC) EQL 0
        THEN
            RETURN (XPN$_ILLOGIC);
        END
    ELSE                                !a1 don't check this for reject
        !
        ! Disconnect or Abort:
        ! Return if we are already disconnected
        !
        IF (.link_status AND MO_CON) EQL 0
        THEN
            BEGIN
            nlb[NLB$V_CONNECTED] = 0;
            RETURN (XPN$_DISCONN);
            END;

    b<rh> = $MOCLZ;
    b<lh> = .nlb[NLB$G_LCL_DISC];       ! Use local code, not remote one    !m1

    JSYS_MTOPR (.nlb[NLB$H_JFN],
                .b,
                .output_descriptor[XPO$A_ADDRESS]);

    nlb[NLB$V_CONNECTED] = 0;

    IF .nlb[NLB$B_SUBFUNC] EQL NLB$K_ABORT
    THEN
        nlb[NLB$V_ABORTED] = 1;

    nlb[NLB$V_DISCONNECTED] = 1;

    RETURN (XPN$_NORMAL)
    END;                                !End of xpn$$disconnect
END
ELUDOM