Google
 

Trailing-Edge - PDP-10 Archives - bb-bt99e-bb - mndany.f05
There are 11 other files named mndany.f05 in the archive. Click here to see a list.
;VERSION 5A COMMENT
;
;	THIS WAS EDIT 434 FOR DBMS VERSION 5.
;	CHANGES FOR VERSION 5A ARE FLAGGED WITH [V5A] IN THE MARGINAL
;	COMMENTS OF THE MAKLIB TEXT.
;
;SYMPTOM:
;
;	DBMEND APPEARS TO HAVE DIFFICULTY RECOGNIZING THE BEGINNING
;	OF A DISK JOURNAL WHEN THE COMMAND /POSITION 1 IS GIVEN.
;
;DIAGNOSIS:
;
;	PAGE 1 OF A DISK JOURNAL IS THE JOURNAL LABEL PAGE AND
;	ALSO CONTAINS THE TERMINAL FRAGMENT OF THE LAST JOURNAL
;	PAGE AND THEREFORE SHOULD NOT BE REFERENCED BY THE /POS
;	COMMAND WITH AN ABSOLUTE ARGUMENT.
;
;CURE:
;
;	INSTALL EDIT 532 TO GIVE AN ERROR MESSAGE WHEN THE COMMAND
;	/POS 1 HAS BEEN GIVEN FOR A DISK JOURNAL. THE ERROR
;	MESSAGE WHICH WE HAVE SELECTED IS "?MNDJPI  JOURNAL
;	POSITIONED INCORRECTLY AFTER PROCESSING LAST-RELATIVE
;	BOUNDARY." THIS MESSAGE IS NOT EXACTLY APPROPRIATE TO 
;	THE PROBLEM, BUT IT IS NOT POSSIBLE TO INSTALL NEW ERROR
;	MESSAGES INTO THE DBMEND REL FILES.
;
;NOTE ***** THIS EDIT APPLIES TO DBMS10 + DBMS20 VERSION 5A
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 532.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
; DBMS-10:
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,532.FIX/F
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
; DBMS-20:
;	@R MAKLIB
;	*MNDANY.REL=MNDANY.REL,532.FIX/F
;
;	@R LINK
;	*@DBMEN2
;
;	@SAVE DBMEND
;
.EDIT 532
.NAME JSM
.MODULE DBMEND
.INSERT POSABS+1,REPLACE:1,<JRST DTA.SU+1057> ;[V5A]
		;TWO DBMEND COMMANDS PASS THRU THIS PIECE OF CODE
		; THEY ARE /POSITION AND /COMPLETE -- BOTH FOR
		; ABSOLUTE ARGUMENTS. BEFORE SCAN GIVES CONTROL
		; TO THE DBMEND COMMAND IT PUTS THE COMMAND INDEX
		; INTO R5, WHICH IS SUPPOSED TO REMAIN UNCHANGED
		; THROUGH THE ENTIRE RUN OF THE COMMAND. THE CODE
		; AT LOCATION POSABS TESTS WHETHER THE JOURNAL IS
		; ON MAGTAPE OR DISK AND GOES TO POSABS+1 ONLY
		; FOR DISK JOURNALS.
	JRST [CAIE R5,15        ;DOING POSITION COMMAND?
	      JRST DTA.SU+1057   ;[V5A] NO, LET USER DO /COMPLETE 1 IF
				;   HE WANTS
	      HRRZ R1,TMPIDX    ;GET CURRENT REQUESTED POSITION
	      CAIN R1,1         ;IS IT 1?
	      JRST EL.JPI       ; YES -- ERROR
	      JRST DTA.SU+1057]  ;[V5A] NO, OK -- OTHER ERRORS WILL BE
				;  CAUGHT LATER
.ENDI
.ENDE
;VERSION 5A COMMENT
;
;	THIS WAS EDIT 441 IN VERSION 5.
;	CHANGES IN THE MAKLIB TEXT OF THE EDIT FOR VERSION 5A WILL
;	BE FLAGGED IN THE MARGINAL COMMENTS.
;
;SYMPTOM:
;
;	DBMEND WILL PRODUCE THE ERROR MESSAGE "?I/O TO UNASSIGNED
;	CHANNEL AT USER PC NNNNNN" WHEN THE /UNLOAD COMMAND IS
;	GIVEN WITHOUT PREVIOUSLY SPECIFYING A JOURNAL.
;
;DIAGNOSIS:
;
;	DBMEND'S /UNLOAD COMMAND BLYTHELY ASSUMED THAT A JOURNAL
;	HAD ALREADY BEEN SPECIFIED.
;
;CURE:
;
;	INSTALL DBMS EDIT 533 TO MAKE IT CHECK FOR A JOURNAL. IF
;	A JOURNAL HAS NOT BEEN PREVIOUSLY SPECIFIED, /UNLOAD WILL
;	ISSUE THE MESSAGE "?MNDJNI JOURNAL NOT YET IDENTIFIED".
;
;NOTE ***** THIS EDIT APPLIES TO DBMS10 + DBMS20 VERSION 5A
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 533.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;FOR DBMS-10:
;
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,533.FIX/FIX
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;FOR DBMS-20:
;
;	@R MAKLIB
;	*MNDANY.REL=MNDANY.REL,533.FIX/FIX
;
;	@R LINK
;	*@DBMEN2
;
;	@SAVE DBMEND
;
;
;***************************************************************
.EDIT 533
.MODULE DBMEND
.NAME JSM
.INSERT $UNLOAD,AFTER,<PUSHJ P,SC%SAV>
	TRNN	STATUS,$JR.BIT	;HAS JOURNAL ALREADY BEEN SPECIFIED?
	JRST	DTA.SU+55	;NO -- GIVE ?MNDJNI MESSAGE
.ENDI
.ENDE
;VERSION 5A COMMENT
;
;	THIS WAS EDIT 442 IN VERSION 5. THE PROBLEM OF EDIT 347 WAS
;	RESOLVED IN VERSION 5A, AND SO THERE IS NO NEED TO ACCOMODATE
;	THAT EDIT HERE. THIS IS WHY THREE LINES OF CODE HAVE BEEN
;	COMMENTED OUT BELOW.
;
;SYMPTOM:
;
;	AFTER DOING A /MERGE OPERATION IN DBMEND-10 TO REMOVE AN
;	INCOMPLETE TRANSACTION THEN UNLOADING THE JOURNAL WITH THE
;	/UNLOAD COMMAND, ANY SUBSEQUENT RUN-UNIT UNDER DBCS TRYING
;	TO RE-USE THE JOURNAL WOULD SOMETIMES FAIL ON AN OPEN WITH
;	AN ERROR-STATUS CODE OF 0962.
;
;DIAGNOSIS:
;
;	THE 0962 ERROR-STATUS CODE WAS REPORTED IF DBMS-10'S
;	JOURNAL-IN-UNDEFINED-STATUS WORD WAS SET IN THE JOURNAL
;	LABEL PAGE OF A DISK JOURNAL. THIS WORD WAS SET BY /MERGE
;	IN ORDER TO SIGNIFY THAT IT WAS CURRENTLY WORKING WITH THE
;	JOURNAL IN ORDER TO RECOVER THE DATA BASE. IT SHOULD BE 
;	CLEARED BY /UNLOAD ON THE COMPLETION OF A SUCCESSFUL MERGE
;	IN ORDER TO INDICATE THAT THIS JOURNAL IS NO LONGER ACTIVELY
;	INVOLVED IN RESTORING THE DATA BASE AND IS NOW AVAILABLE
;	FOR FURTHER WORK UNDER RUN-UNITS USING DBCS.
;	THIS SYMPTOM IS ESPECIALLY TROUBLESOME IN CASES WHERE
;	SIMULTANEOUS USERS WISH TO SHARE A PRE-ALLOCATED AND
;	TRUNCATED JOURNAL AFTER IT HAS BEEN USED BY DBMEND-10 IN
;	ORDER TO BACK OUT A PREVIOUS INCOMPLETE TRANSACTION.
;	DBMEND-20 HANDLES THIS PROCEDURE DIFFERENTLY.
;
;CURE:
;
;	INSTALL EDIT 534 TO CAUSE DBMEND-10 /UNLOAD TO CLEAR THE
;	JOURNAL-IN-UNDEFINED-STATE WORD IN THE EVENT OF A SUCCESS-
;	FUL /MERGE. THIS EDIT USES BIT 0 IN THE RIGHT HALF OF
;	DBMEND'S STATUS REGISTER IN ORDER TO CONVEY INFORMATION
;	ABOUT THE JOURNAL STATE FROM /MERGE TO /UNLOAD. IF THIS
;	BIT IS SET COMING INTO THE THE EXECUTION OF /UNLOAD, IT
;	WILL CLEAR IT AND GIVE THE MESSAGE "?MNDPIF JOURNAL'S
;	LABEL PAGE HAS IMPROPER FORMAT". THIS BIT IS NOT OTHER-
;	WISE USED BY DBMEND-10 AND IS NOT DEFINED TO IT. A SUB-
;	SEQUENT /UNLOAD WILL UNLOAD THE DISK JOURNAL, CLEARING
;	THE JOURNAL-IN-UNDEFINED-STATE WORD. IN THIS WAY THE USER
;	WILL BE RELIEVED OF THE DISTRESSING PROBLEM OF HAVING HIS
;	JOURNAL LABEL IN AN UNDEFINED STATE WHEN HE EXITS FROM
;	DBMEND-10.
;
;NOTE ***** THIS EDIT APPLIES TO DBMS10 VERSION 5A ONLY
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 534.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;FOR DBMS-10:
;
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,534.FIX/FIX
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;***************************************************************
.EDIT 534
.MODULE DBMEND
.NAME JSM
.INSERT $MERGE+20,AFTER,<POP P,R1>	;[V5A]
	;[REMOVED FOR V5A]	PUSH	P,R1
	;[REMOVED FOR V5A]	PUSHJ	P,SKECHK
	;[REMOVED FOR V5A]	POP	P,R1
	TRO	STATUS,400000	; SET MERGE-IN-PROGRESS BIT
.ENDI
.INSERT MR.EX,BEFORE,<JRST %POPJ1>
	TRZ	STATUS,400000	; CLEAR MERGE-IN-PROGRESS BIT
				;UPON SUCCESSFUL COMPLETION OF /MERGE
.ENDI
.INSERT DTA.SU+715,AFTER,<SETOM JR.BUF+21>
	TRZE	STATUS,400000	; MERGE-IN-PROGRESS BIT STILL SET?
				; IF SO, TURN IT OFF IN ANY EVENT
	JRST	DTA.SU+1006	; YES -- GIVE ?MNDPIF MESSAGE
	SETZM	JR.BUF+30	; NO -- CLEAR JRN-IN-UNDEF-STATE
				; WORD BEFORE REWRITING JRN
				; LABEL PAGE
.ENDI
.ENDE
;VERSION 5A COMMENT
;
;	THIS WAS EDIT 450 IN VERSION 5.
;
;SYMPTOM:
;
;	IN CASES WHERE THE /schema COMMAND IS NOT PRECEDED BY /journal,
;	DBMEND-10 DOES NOT UNDERSTAND /schema schnam , BUT IT WILL
;	UNDERSTAND /schema SCHNAM.
;
;DIAGNOSIS:
;
;	FOR THE MODIFIER AFTER THE VERB, DBMEND WASN'T CONVERTING
;	LOWER CASE TO UPPER CASE PROPERLY CAUSING COMPARISIONS TO FAIL.
;
;CURE:
;
;	APPLY EDIT 535 TO DBMEND-10.  EDIT 535 WILL CAUSE LOWER CASE TO
;	BE COMPARED PROPERLY TO THE CORRESPONDING UPPER CASE ALPHABETICS
;	FOR THIS COMMAND. NOTE, THE SCHEMA NAME WILL BE OUTPUT IN UPPER
;	CASE ON YOUR DBMEND LISTINGS.
;
;NOTE ***** THIS EDIT APPLIES TO DBMS-10 VERSION 5A ONLY
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 535.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;  FOR A DBMS-10 SYSTEM...
;
;	R MAKLIB
;	*MNDANY.REL=MNDANY.REL,DIS535.FIX/F
;
;	R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;
.EDIT 535
.MODULE DBMEND
.NAME JSM
.INSERT DBMEND+1,REPLACE:1,<MOVE P,DTA.SU+3>
	MOVE	P,[-STKSIZ+10,,STACK+10]  ;GRAB 10 LOCS OFF STACK FOR 
					  ; WORK AREA.
.ENDI
.INSERT DTA.SU+701,AFTER,<MOVEM R0,LB.SCL>
	MOVEM	R1,1016		;GRAB 2 AC'S TO WORK WITH; STICK THEIR
	MOVEM	2,1017		; CONTENTS IN OPEN LOCS ON STACK.
				; ALSO, CAN USE AC0.
	MOVNM	R0,2	;USE SCHEMA NAME LENGTH TO MAKE NEGATIVE POINTER
	HRLZ	R1,2	; FOR BYTE PROCESSING BELOW.
	MOVE	2,[POINT 7,LB.BLK]	;BYTE POINTER FOR SCHEMA NAME
	ILDB	R0,2	;GET A BYTE
	CAIGE	R0,"a"	;IS IT IN RANGE OF a THRU z?
	JRST	.+5	; NO -- TOO LOW
	CAILE	R0,"z"
	JRST	.+3	; NO -- TOO HIGH
	SUBI	R0,40	; YES -- MAKE IT UPPER CASE.
	DPB	R0,2	;PUT IT BACK INTO SCHEMA NAME
	AOBJN	R1,.-7	;FINISHED WITH BYTE STRING?
	MOVE	2,1017	;RESTORE AC'S 0 THU 2
	MOVE	R1,1016
	MOVE	R0,LB.SCL
.ENDI
.ENDE
;VERSION 5A COMMENT
;
;	THIS WAS EDIT 453 IN VERSION 5.
;	CHANGES IN THE MAKLIB TEXT OF THE EDIT FOR VERSION 5A WILL
;	BE FLAGGED IN THE MARGINAL COMMENTS.
;
;SYMPTOM:
;
;	THE DBMEND COMMAND /JOURNAL J*.* GIVES THE ERROR MESSAGE
;	"?MNDWCP WILDCARDING IS PROHIBITED", IMMEDIATELY FOLLOWED BY
;	THE MESSAGE "?PA1050 ILLEGAL INSTRUCTION AT USER PC 0".
;
;DIAGNOSIS:
;
;	AFTER THE ?MNDWCP MESSAGE IS DISPLAYED, THE ERROR-HANDLING
;	PROCEDURE DOES A JRST 0 INSTEAD OF A JRST ABORT TO ENTER
;	DBMEND'S RECYCLING PROCEDURE AFTER AN ERRONEOUS COMMAND.
;
;CURE:
;
;	INSTALL EDIT 536 TO MAKE THE /JOURNAL COMMAND RECYCLE THROUGH
;	THE REGULAR RECYCLE ROUTINE AFTER A ?MNDWCP ERROR.
;
;NOTE ***** THIS EDIT APPLIES TO DBMS10 + DBMS20 VERSION 5A
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 536.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;FOR DBMS-10:
;
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,536.FIX/FIX
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;FOR DBMS-20:
;
;	@R MAKLIB
;	*MNDANY.REL=MNDANY.REL,536.FIX/FIX
;
;	@R LINK
;	*@DBMEN2
;
;	@SAVE DBMEND
;
;
;***************************************************************
.EDIT 536
.MODULE DBMEND
.NAME JSM
.INSERT DTA.SU+725,REPLACE:1,<JRST 0>	;[V5A]
	JRST	ABORT	;AFTER TYPOUT, GO TO REGULAR ABORT ROUTINE TO
			;  RECYCLE FOR NEXT COMMAND.
.ENDI
.ENDE
;VERSION 5A COMMENT
;
;	THIS WAS EDIT 454 IN VERSION 5.
;
;SYMPTOM:
;
;	IF THE DBMEND COMMAND /MERGE IS ISSUED WITHOUT A "BEFORE" OR
;	"AFTER" ARGUMENT, THE RESULTING ?SCNSVR MESSAGE HAS GARBAGE
;	AT THE END.
;
;DIAGNOSIS:
;
;	THE /MERGE ERROR HANDLING PROCEDURE IS NOT PROVIDING A VALID
;	ARGUMENT TO SCAN'S ERROR MESSAGE PROCESSOR.
;
;CURE:
;
;	INSTALL EDIT 537.
;
;NOTE ***** THIS EDIT APPLIES TO DBMS10 + DBMS20 VERSION 5A
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 537.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;FOR DBMS-10:
;
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,537.FIX/FIX
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;FOR DBMS-20:
;
;	@R MAKLIB
;	*MNDANY.REL=MNDANY.REL,537.FIX/FIX
;
;	@R LINK
;	*@DBMEN2
;
;	@SAVE DBMEND
;
;
;***************************************************************
.EDIT 537
.NAME JSM
.MODULE DBMEND
.INSERT $MERGE+6,REPLACE:1,<JUMPLE C,E.SVR##>
	JUMPG	C,.+3	;ENCOUNTERED THIS ERROR? NO -- GO ON IN MERGE
	MOVEI	R0,DBHIGH+13	;YES -- PROVIDE *MERGE PARM ADDRESS
	JRST	E.SVR##		;AND GO TO SCAN'S ERROR MESSAGE PROCESSOR
.ENDI
.ENDE
;SYMPTOM:
;
;	AN ABSTRACT OF A JOURNAL WITH TEXT ENTRIES DOES NOT CORRECTLY PRINT
;	ANY TEXT ENTRY WHICH IS LONGER THAN 80 ASCII CHARACTERS.
;
;DIAGNOSIS:
;
;	THE ROUTINE WHICH PRODUCES THE MESSAGES FOR SUCCEEDING BLOCKS OF THE
;	SAME TEXT ENTRY FORGETS THAT THE RUN-UNIT-ID, WHICH IS NOT PRINTED
;	FOR BLOCKS OTHER THAN THE FIRST BLOCK IN THE TEXT, IS PASSED ALONG
;	WITH THE TEXT, AND ATTEMTPS TO USE IT INSTEAD OF THE TEXT.
;
;CURE:
;
;	INSTALL EDIT 457.  THIS WILL CAUSE TEXT BLOCKS OVER 80 ASCII CHARACTERS
;	TO BE PRINTED AS MULTIPLE TEXT BLOCKS AND IS A TEMPORARY SOLUTION TO
;	THIS PROBLEM.
;
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 552.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;FOR DBMS-10:
;
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,552.FIX/FIX
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;FOR DBMS-20:
;
;	@R MAKLIB
;	*MNDANY.REL=MNDANY.REL,552.FIX/FIX
;
;	@R LINK
;	*@DBMEN2
;
;	@SAVE DBMEND
;
;
;***************************************************************
.EDIT 552
.NAME CLH
.MODULE DBMEND
.INSERT DTA.SU+262,REPLACE:8,<TLNN 1,340000>
	MOVE	R0,MNDTEX##	;[552] ASSUME SINGLE BLOCK FOR NOW
.ENDI
.ENDE
;SYMPTOM:
;
;	IF THE DBMEND COMMANDS /ABSTRACT, /BUILD, /EXCLUDE, /FORCE
;	/JOURNAL, /OPEN, OR /SCHEMA ARE ISSUED WITHOUT AN
;	ARGUMENT, THE RESULTING ?SCNSVR MESSAGE HAS GARBAGE
;	AT THE END.
;
;DIAGNOSIS:
;
;	THE COMMAND ERROR HANDLING PROCEDURES ARE NOT PROVIDING A VALID
;	ARGUMENT TO SCAN'S ERROR MESSAGE PROCESSOR.
;
;CURE:
;
;	INSTALL EDIT 553.
;
;NOTE ***** THIS EDIT APPLIES TO DBMS10 + DBMS20 VERSION 5
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 553.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;FOR DBMS-10:
;
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,553.FIX/FIX
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;FOR DBMS-20:
;
;	@R MAKLIB
;	*MNDANY.REL=MNDANY.REL,553.FIX/FIX
;
;	@R LINK
;	*@DBMEN2
;
;	@SAVE DBMEND
;
;
;***************************************************************
.EDIT 553
.NAME CLH
.MODULE DBMEND
.INSERT $ABSTRACT+1,REPLACE:1,<JUMPLE C,E.SVR##>
	JUMPG	C,.+3		;[553] NO PARAMETER GIVEN?
	MOVEI	R0,DBHIGH	;[553] YES, GET ERROR PARAMETER
	JRST	E.SVR##		;[553] LET SCAN PRINT MESSAGE
.ENDI
.INSERT $BUILD+1,REPLACE:1,<JUMPLE C,E.SVR##>
	JUMPG	C,.+3		;[553] NO PARAMETER GIVEN?
	MOVEI	R0,DBHIGH+1	;[553] YES, GET ERROR PARAMETER
	JRST	E.SVR##		;[553] LET SCAN PRINT MESSAGE
.ENDI
.INSERT $CLOSE+1,REPLACE:1,<JUMPLE C,E.SVR##>
	JUMPG	C,.+3		;[553] NO PARAMETER GIVEN?
	MOVEI	R0,DBHIGH+2	;[553] YES, GET ERROR PARAMETER
	JRST	E.SVR##		;[553] LET SCAN PRINT MESSAGE
.ENDI
.INSERT $EXCLUDE,AFTER,<PUSHJ 17,SC%SAV>
	MOVEI	R0,DBHIGH+7	;[553] GET ERROR PARAMETER, JUST IN CASE
.ENDI
.INSERT $FORCE,AFTER,<PUSHJ 17,SC%SAV>
	MOVEI	R0,DBHIGH+10	;[553] GET ERROR PARAMETER, JUST IN CASE
.ENDI
.INSERT $JOURNAL,AFTER,<PUSHJ 17,SC%SAV>
	MOVEI	R0,DBHIGH+11	;[553] GET ERROR PARAMETER, JUST IN CASE
.ENDI
.INSERT $OPEN,AFTER,<PUSHJ 17,SC%SAV>
	MOVEI	R0,DBHIGH+14	;[553] GET ERROR PARAMETER, JUST IN CASE
.ENDI
.INSERT $SCHEMA+1,REPLACE:1,<JUMPLE C,E.SVR##>
	JUMPG	C,.+3		;[553] NO PARAMETER GIVEN?
	MOVEI	R0,DBHIGH+20	;[553] YES, GET ERROR PARAMETER
	JRST	E.SVR##		;[553] LET SCAN PRINT ERROR MESSAGE
.ENDI
.ENDE
;VERSION 5A COMMENT
;
;	THIS WAS EDIT 462 IN DBMS-10/20 VERSION 5.
;
;SYMPTOM:
;
;	IN DBMEND-10,
;	WHEN JOURNALLING IS DONE BE COMMAND, THE DBMEND /START AND /END
;	COMMANDS DO NOT ALLOW THE USER TO EFFECTIVELY SPECIFY A PARAMETER
;	FOR RUN-UNIT ID.
;
;DIAGNOSIS:
;
;	FOR COMMAND JOURNALLING, THE BOUNDARY-CHECKING ROUTINE WAS BY-
;	PASSING THE CHECK FOR RUN-UNIT ID. HOWEVER, IN THE CASES WHERE
;	THESE COMMANDS ARE GIVEN IN THE FORM "/START LAST" OR "/END LAST"
;	THE USER SHOULD NOT BE ALLOWED TO SUPPLY A RUN-UNIT ID, ACCORDING
;	TO THE DBMS-10/20 ADMINISTRATORS MANUALS.
;
;CURE:
;
;	INSTALL EDIT 555 IN ORDER TO DO THE APPROPRIATE CHECKING.
;	DBMS-10 TRANSACTION RECOVERY IS UNAFFECTED BY THIS EDIT.
;
;NOTE ***** THIS EDIT APPLIES TO DBMS10 VERSION 5A ONLY.
;THE CORRESPONDING EDIT FOR DBMS-20 IS NUMBER 554.
;THE RECOMMENDED FILENAME FOR THIS EDIT IS 555.FIX.    THE LINES
;.EDIT THRU .ENDE SHOULD BE TYPED INTO THAT FILE
;
;	APPLY THIS EDIT TO MNDANY.REL
;
;THE EDIT CAN BE INSERTED USING THE FOLLOWING COMMANDS:
;
;FOR DBMS-10:
;
;	.R MAKLIB
;	*MNDANY.REL=MNDANY.REL,555.FIX/FIX
;
;	.R LINK
;	*@DBMEN1
;
;	.SAVE DBMEND
;
;***************************************************************
.EDIT 555
.NAME JSM
.MODULE DBMEND
.INSERT DETBOUND+10,REPLACE:1,<JRST DO.RUN>
	JRST	DO.CID		;GO DO RUN-UNIT ID CHECKING
.ENDI
.INSERT DTA.SU+1637,AFTER,<MOVEM R0,BNDUBR(BND)>	;[V5A]
	SKIPGE	R0,BNDUBM(BND)	;DOING COMMAND MODE? (IF YES, FLAG = -1)
	SKIPL	R0,BNDUBX(BND)	;HAVE USER-DEFINED BOUNDARY INDEX?
				; (IF NO, FLAG = -1)
	JRST	.+3		;BYPASS
	SKIPL	R0,BNDUBR(BND)	;HAVE USER-DEFINED RUN-UNIT ID?
				; (IF NO, FLAG = -1)
	JRST	DTA.SU+1627	;[V5A]IF WE GET HERE, THE USER HAS PASSED
			;A COMMAND OF THE FORM "/START LAST(N)".
			;GIVE ERROR MESSAGE ?MNDIFB
.ENDI
.ENDE