Google
 

Trailing-Edge - PDP-10 Archives - TOPS-20_V6.1_DECnetDistr_7-23-85 - decnet-sources/fal.mac
There are 26 other files named fal.mac in the archive. Click here to see a list.
TITLE	FAL	Network file transfer utility for TOPS20 DECNET
SUBTTL	D. Oran	- P.J. Taylor /POM/CLB/ 17-Nov-81

;
;
;
;	    COPYRIGHT (c) 1978,1979,1980,1985
;           DIGITAL EQUIPMENT CORPORATION, MAYNARD, MA.
;
;     THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED
;     AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
;     AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS
;     SOFTWARE  OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
;     OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON.  NO  TITLE  TO
;     AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;     
;     THE INFORMATION  IN  THIS  SOFTWARE  IS  SUBJECT  TO  CHANGE
;     WITHOUT  NOTICE  AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
;     BY DIGITAL EQUIPMENT CORPORATION.
;     
;     DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
;     OF  ITS  SOFTWARE  ON  EQUIPMENT  WHICH  IS  NOT SUPPLIED BY
;     DIGITAL.


	SEARCH	GLXMAC			;Get Galaxy symbols
	PROLOG	(FAL)

	SEARCH DAPSYM			;Get DAPLIB symbols
	SEARCH	QSRMAC			;Get quasars symbols

;Version Information

	FALVER==2			;MAJOR VERSION OF FAL
	FALMIN==0			;MINOR VERSION OF FAL
	FALEDT==32			;EDIT LEVEL
	FALWHO==0			;WHO LAST EDITED (0=DEC DEVELOPMENT)

	GLOB	DAPEDT

	VFAL==<VRSN.(FAL)>+DAPEDT	;Get the version level

	EXTERN	.JBFF			;ADDRESS OF FIRST FREE LOCATION
SUBTTL	Table of contents

;               TABLE OF CONTENTS FOR FAL
;
;
;                        SECTION                                   PAGE
;    1. Title page................................................   1
;    2. Table of contents.........................................   2
;    3. Revision History..........................................   3
;    4. Constants and assembly parameters.........................   4
;    5. LOCAL MACROS..............................................   5
;    6. Job version and entry vector..............................   6
;    7. Initialization blocks.....................................   6
;    8. MAIN ENTRY POINT AND INITIALIZATION.......................   7
;    9. CHKQUE  Routine to process IPCF messages..................   8
;   10. LOG  message processing...................................   9
;   11. CHKFRK  Routine to check fork status......................  10
;   12. SERVER initializtion......................................  11
;   13. SERVER Listening loop.....................................  12
;   14. SERVER Connection verification routine....................  13
;   15. CREFRK  Fork creation and initializtion...................  14
;   16. KILFRK  Routine to kill a server..........................  15
;   17. LOGSNM  Routine to log system name........................  16
;   18. LOGMSG and LOGCHR Logfile output routines.................  17
;   19. MSGCHR Text output routine for inferior servers...........  18
;   20. SNDFAL  Routine to send IPCF packet to FAL................  19
;   21. CLSJFN, RELJFN, CPYSTR....................................  19
;   22. PSIINI  Software interrupt system initialization..........  20
;   23. Interrupt service routines................................  20
;   24. Pure data storage.........................................  21
;   25. Interrupt tables..........................................  22
;   26. Impure Data storage.......................................  23
SUBTTL	Revision History

COMMENT \

Edit	Comment

0020	First field test of FAL 2(20)
0021	Fix FAL to check for network support before starting forks
	Fix logging from forks
0022	Add interrupt reason to D$INTR calls so it doesn't interrogate
	link status for each interrupt
0023	Make DIRPSW large enough to accommadate 39 character passwords
	so stack won't get destroyed.  Also get default account for
	login so that a null account string will be allowed.
0024	Process all interrupts as level 1 and make LEV1PC global to
	allow access from D$INTR in DAPLIB

*** Edits for DECnet-20 V3.0 begin here
	
0025	Implement logging of activity in PS:<SPOOL>FAL.LOG. If this file
	exists it will be appended to. If the file does not exist, no
	logging will be done.
0026	Make SRVUSR, SRVACT, and SRVPSW large enough to accommodate the
	longest possible strings.
0027	Add DI%PGM field to DAPLIB initialization block

*** Changes for TOPS-20 V. 6.1 begin here ***

0030	Add global entry .DNCON which will allow us to link without route-
	through support (which we don't need/use anyhow).

0031	Add new ACCES function for password checking with encrypted psw's

0032	Change debugging object type to conform with updated standard

\ ;end revision history
SUBTTL	Constants and assembly parameters

; ACCUMULATOR DEFINITIONS


	P5==13				;EXTRA PERMANENT AC
	M==14				;IPCF message address

;Constants

	XP	SRVLNK,1		;Server link index is 1

	XP	MINSRV,3		;Minimum number of forks
	XP	MAXSRV,4		;Maximum number of forks

	XP	MAXNOD,20		;Maximum number of nodes
	XP	PDLEN,MAXNOD*20		;Size of the stack
	XP	GJFSIZ,20		;Size of the GTJFN block
	XP	FILSIZ,20		;Maximum size of a file name
	XP	CHKLEN,.CKAUD+1		;Length of CHKAC arg block

	XP	MSGSIZ,^D500*5-1	;Maximum count of logcharacters


;Interrupt channel assignments

	XP	.ICIPC,0		;IPCF channel
	XP	.ICDAV,1		;Data available
	XP	.ICCDN,2		;Connect/Disconnect
	XP	.ICIMA,3		;Interrupt message

	GLOB	DATEND			;Last location of DAP storage

	NFKPGS==<DATEND/1000>+1		;Number of fork pages
SUBTTL LOCAL MACROS

DEFINE TXT(TEXT) <POINT 7,[ASCIZ\TEXT\]>

DEFINE $FD(NAME) <
	XWD 10,0
	ASCIZ\NAME\>
SUBTTL	Job version and entry vector

	LOC	137			;SET THE VERSION
.JBVER:	EXP	VFAL
	RELOC

; ENTRY VECTOR DEFINITION

ENTVEC:	JRST FAL			;MAIN ENTRY POINT
	JRST FAL			;REENTER ENTRY POINT
	EXP VFAL			;VERSION OF FAL PROGRAM

SUBTTL	Initialization blocks

FALIB:	$BUILD	(IB.SZ)
	  $SET	(IB.PRG,,%%.MOD)	;Program name is FAL
	  $SET	(IB.OUT,,LOGMSG)	;Default output routine
	  $SET	(IB.INT,,<LEVTAB,,CHNTAB>)	;Point to PSI stuff
	  $SET	(IB.PIB,,FALPIB)	;Point to IPCF stuff
	$EOB

FALPIB:	$BUILD	(PB.MXS)		;Pid info
	  $SET	(PB.HDR,PB.LEN,PB.MXS)	;Length
	  $SET	(PB.INT,IP.CHN,.ICIPC)	;IPCF channel
	  $SET	(PB.FLG,IP.PSI,1)	;Use PSI for IPCF
	  $SET	(PB.SYS,IP.MNP,MAXSRV)	;Number of pids required
	  $SET	(PB.NAM,,<POINT 7,SRVOBJ>)
	$EOB

SRVIB:	$BUILD	(IB.SZ)
	  $SET	(IB.PRG,,'FALSRV')	;Program name is FALSRV
	  $SET	(IB.OUT,,MSGCHR)	;Default output routine
	  $SET	(IB.INT,,<LEVTAB,,CHNTAB>)	;Point to PSI stuff
	  $SET	(IB.PIB,,SRVPIB)	;Point to IPCF stuff
	$EOB

SRVPIB:	$BUILD	(PB.MXS)		;Pid info
	  $SET	(PB.HDR,PB.LEN,PB.MXS)	;Length
	  $SET	(PB.INT,IP.CHN,.ICIPC)	;IPCF channel
	  $SET	(PB.FLG,IP.PSI,1)	;Use PSI for IPCF
	$EOB

LOGFOB:	$BUILD	(FOB.SZ)
	  $SET	(FOB.FD,,[$FD(PS:<SPOOL>FAL.LOG)])
	  $SET	(FOB.CW,FB.BSZ,7)
	$EOB

LOGDBG:	$BUILD	(FOB.SZ)
	  $SET	(FOB.FD,,[$FD(DSK:FAL.LOG)])
	  $SET	(FOB.CW,FB.BSZ,7)
	$EOB

.DNCON:: $RETF			;[0030] No route-through support !!!
SUBTTL	MAIN ENTRY POINT AND INITIALIZATION

FAL:	RESET				;Clean up from last start
	MOVE P,[IOWD PDLEN,PDL]		;SET UP STACK
	SETZM	DATORG			;Clear impure storage
	MOVE	S1,[DATORG,,DATORG+1]
	BLT	S1,DATEND-1
	HRROI	S1,SRVOBJ		;Point to my object name
	MOVX	S2,TXT(FAL)
	SKIPE	DEBUGW
	MOVX	S2,TXT(.FALDEBUG)	;[0032]Become debugging FAL
	$CALL	CPYSTR			;Store the name
	MOVEI	S1,IB.SZ
	MOVEI	S2,FALIB		;POINT TO IB
	$CALL	I%INIT			;GET THE LIBRARY
	HRROI	S1,[ASCIZ/DCN:/]
	STDEV
	 ERJMP	[$FATAL (No network support)]
	MOVE	S2,FALPIB+PB.PID	;Get my PIB
	MOVEM	S2,FALPID		;Say I am FAL
	HRRZI	S1,.MSIIC		;BYPASS MOUNT COUNTS
	MSTR
	 ERJMP	.+1
	$CALL	PSIINI			;INITIALIZE PSI SYSTEM
	MOVX	S1,GJ%SHT+GJ%OLD	;[0025]IS LOG FILE AROUND?
	HRROI	S2,[ASCIZ/PS:<SPOOL>FAL.LOG/] ;[0025]
	GTJFN				;[0025]
	 ERJMP	NOLOG			;[0025] DON'T LOG ANYTHING
	RLJFN				;[0025]RELEASE THE JFN
	JFCL				;[0025]DONT CARE ABOUT ERRORS
	MOVEI	S1,FOB.SZ		;[0025]LENGTH OF THE FOB
	MOVEI	S2,LOGFOB		;[0025]ADDRESS OF THE FOB
	SKIPE	DEBUGW			;[0025]DEBUGGING?
	MOVEI	S2,LOGDBG		;[0025]ADDRESS OF DEBUG FOB
	$CALL	F%AOPN			;[0025]APPEND OPEN
	MOVEM	S1,LOGIFN		;[0025]SAVE THE NEW IFN
	SKIPT				;[0025]FILE OPENED OK?
NOLOG:	SETOM	LOGIFN			;[0025]NO, FORGET IT
	SETOM	FRKFLG			;SET TO CREATE INITIAL FORKS
	SKIPE	DEBUGW			;AM I DEBUGGING?
	JRST	SRVINI			;YES..JUST BECOME LISTENER

MAIN:	SETZM	SLPTIM			;ASSUME WE'LL WAIT FOR INTERRUPT
	$CALL	CHKQUE			;PROCESS IPCF MESSAGES
	AOSN	FRKFLG			;CHECK FORKS?
	$CALL	CHKFRK			;YES..CHECK OUR FORKS
	SKIPL	S1,LOGIFN		;GET LOGFILE IFN
	$CALL	F%CHKP			;CHECK POINT IT
	MOVE	S1,SLPTIM		;GET MAX SLEEP TIME
	$CALL	I%SLP			;WAIT FOR INTERRUPT
	JRST	MAIN
SUBTTL	CHKQUE	Routine to process IPCF messages

CHKQUE:

CHKQ.1:	SETZB	M,MESSAG		;ZERO MESSAGE ADDRESS
	$CALL	C%RECV			;RECEIVE A MESSAGE?
	JUMPT	CHKQ.9			;[0025]YES..CHECK IT OUT
	$RETF				;NO..NOTHING THERE

CHKQ.9:	LOAD	M,MDB.MS(S1),MD.ADR	;GET THE MESSAGE ADDRESS
	MOVEM	M,MESSAG		;SAVE ADDRESS
	LOAD	S1,.MSTYP(M),MS.TYP	;GET THE MESSAGE TYPE
	MOVSI	T2,-NMSGT		;NO -- SEARCH QUASAR TYPES

CHKQ.3:	HRRZ	T1,MSGTBL(T2)		;GET A MESSAGE TYPE
	CAMN	S1,T1			;MATCH?
	JRST	CHKQ.4			;YES, WIN
	AOBJN	T2,CHKQ.3		;NO, LOOP
	JRST	CHKQ.5			;UNKNOWN TYPE -- IGNORE IT

CHKQ.4:	HLRZ	T1,MSGTBL(T2)		;GET THE ROUTINE ADDRESS
	PUSHJ	P,0(T1)			;DISPATCH

CHKQ.5:	$CALL	C%REL			;RELEASE MESSAGE
CHKQ.6:	JRST	CHKQ.1			;GET NEXT MESSAGE


MSGTBL:	XWD	LOG,MT.TXT		;Log from FAL or QUASAR ACK

	NMSGT==.-MSGTBL
SUBTTL	LOG  message processing

LOG:	$SAVE	<STREAM>		;Preserve our stream
	MOVE	S1,.MSCOD(M)		;Get stream number from message
	MOVEM	S1,STREAM
	HRROI	S1,MSGTXT-MSGHDR(M)	;Point to text
	HLRZ	S2,MSGARH-MSGHDR(M)	;Get argument length
	CAIG	S2,1			;Any text to log?
	 $RETT				;No..just return
	$TEXT	(,<^Q/S1/^0>)	;Log it
	$RETT
SUBTTL	CHKFRK	Routine to check fork status

CHKFRK:	$SAVE	<P1>
	SETZM	FRKFLG			;Clear flag to say we've been here
	MOVSI	P1,-MAXSRV		;Get maximum fork number
CHKFR1:	HRRZ	S1,FRKTBL(P1)		;Get fork handle
	JUMPE	S1,CHKFR2		;Next fork if handle is nill
	RFSTS				;Read fork status
	LOAD	T1,S1,RF%STS		;Get status field
	CAIE	T1,.RFHLT		;Is fork halted
	CAIN	T1,.RFFPT		; or forced to terminate?
	SKIPA				;Yes..process the error
	JRST	CHKFR2			;No..check next fork
	$TEXT	(,<Abnormal process termination at PC ^O/S2,RHMASK/>)
	$TEXT	(,<Status: ^O/S1/^0>)
	HRRZ	S1,P1			;Get the fork index
	$CALL	KILFRK			;Kill the dead fork
CHKFR2:	AOBJN	P1,CHKFR1		;Check the next fork

	MOVE	S1,FRKCNT		;Get active fork count
CHKFR3:	CAIL	S1,MINSRV		;Do we have enough forks?
	$RETT				;Yes..just return
	$CALL	CREFRK			;No..create a fork
	JUMPT	CHKFR3			;Check count again
	MOVEI	S1,^D60			;Set sleep time to a minute
	MOVEM	S1,SLPTIM
	SETOM	FRKFLG			;Request another check
	$RETF
SUBTTL	SERVER initializtion

DAPIB:	$BUILD	(.DISIZ)		;Dap initialization block
	  $SET	(.DIFLG,DI%CNT,1)	;Request 1 link
	  $SET	(.DIFLG,DI%PGM,%PGFAL)	;[0027]We are FAL
	$EOB

SRV:	RESET				;Clean up from last start
	MOVE P,[IOWD PDLEN,PDL]		;SET UP STACK
	SETZM	DATORG			;Clear impure storage
	MOVE	S1,[DATORG,,DATORG+1]
	BLT	S1,DATEND-1
	HRRZM	T2,STREAM		;[0025]STREAM NUMBER-1
	AOS	STREAM			;[0025]STREAM NUMBER
	HRROI	S1,SRVOBJ		;Point to server name
	MOVX	S2,TXT(FAL)		;GET OBJECT NAME
	SKIPE	DEBUGW
	MOVX	S2,TXT(.FALDEBUG)	;[0032]debugging FAL
	$CALL	CPYSTR			;Copy the string
	MOVEI	S1,IB.SZ
	MOVEI	S2,SRVIB		;POINT TO IB
	$CALL	I%INIT			;GET THE LIBRARY
	HRRZI	S1,.MSIIC		;BYPASS MOUNTS
	MSTR
	 ERJMP	.+1
	$CALL	PSIINI			;INITIALIZE PSI SYSTEM
	SETOM	LOGIFN			;Not to write in logfile
	SETZM	FRKCNT			;I don't have any inferiors

SRVINI:	MOVEI	S1,.DISIZ
	MOVEI	S2,DAPIB
	$CALL	D$INIT			;Init DAPLIB
	SKIPT
	$FATAL	(Can't initialize DAPLIB)
	JRST	LISTEN
SUBTTL	SERVER Listening loop

DAPOB:	$BUILD	(.DOSIZ)		;Dap link open block
	  $SET	(.DOFLG,DO%SRV,1)	;Become server
	  $SET	(.DOFLG,DO%WCN,1)	;Wait for connection
	  $SET	(.DOFLG,DO%PSI,1)	;Use PSI
	  $SET	(.DOFLG,DO%LNK,SRVLNK)	;Use servers link
	  $SET	(.DOPSI,DO%CDN,.ICCDN)	;Connect/Disconnect channel
	  $SET	(.DOPSI,DO%DAV,.ICDAV)	;Data available
	  $SET	(.DOPSI,DO%INA,.ICIMA)	;Interrupt message
	  $SET	(.DOCID,,CHKUSR)		;Connect verification
	  $SET	(.DONOD,,<POINT 7,SRVNOD>)	;Remote node name
	  $SET	(.DOOBJ,,<POINT 7,SRVOBJ>)	;Requested object name
	  $SET	(.DOUSR,,<POINT 7,SRVUSR>)	;User string
	  $SET	(.DOPSW,,<POINT 7,SRVPSW>)	;Password string
	  $SET	(.DOACT,,<POINT 7,SRVACT>)	;Account string
	  $SET	(.DOOPD,,<POINT 7,SRVOPD>)	;Optional data
	$EOB

DAPSRV:	$BUILD	(.DFSIZ)
	  $SET	(.DFFLG,DF%LNK,SRVLNK)
	  $SET	(.DFLFS,,<POINT 7,SRVFIL>)
	$EOB

LISTEN:	SKIPGE	LOGIFN			;Am I the master?
	$CALL	CLSJFN			;Yes..close all JFN's
	MOVEI	S1,SRVSIZ		;Get size of server data
	MOVEI	S2,SRVBEG		;Get start of area to clear
	$CALL	.ZCHNK			;Clear it
	MOVEI	S1,.DOSIZ		;Get size of open block
	MOVEI	S2,DAPOB		;Point to open block
	$CALL	D$OPEN
	JUMPF	LISTE5			;Close our end on failure
	$TEXT	(,Connection from node ^T/SRVNOD/ for ^T/SRVUSR/)

LISTE1:	$CALL	RELJFN			;Release unopen JFNS
	MOVEI	S1,.DFSIZ
	MOVEI	S2,DAPSRV
	MOVEI	T1,^D5			;Timer retry to wait for access
	$CALL	D$FUNC			;Do one function
	JUMPF	LISTE3			;Check link status on failure
LISTE2:	MOVEI	S1,^D20			;Wait twenty seconds
	$CALL	I%SLP
LISTE3:	MOVEI	S1,SRVLNK		;Get the link index
	$CALL	D$STAT			;Check link status
	TXNE	S1,MO%EOM		;Message available?
	JUMPT	LISTE1			;Yes..go process it
	TXNN	S1,MO%SYN!MO%ABT	;Disconnected or aborted?
	TXNN	S1,MO%CON		; and still connected?
	JRST	LISTE5			;No..close our end
	TXNE	S1,MO%EOM		;Have a message available?
	JRST	LISTE1			;Yes..process it
	SOJG	T1,LISTE2		;No..try again
LISTE5:	MOVEI	S1,SRVLNK		;Point to our link
	MOVEI	S2,[.DCX38]		;Abort close
	$CALL	D$CLOS			;Close or abort the link
	$TEXT	(,^0)			;CLOSE THE LOG ENTRY
	JRST	LISTEN			;Wait for new connection

FNCTBL:	TXT(Unknown)
	TXT(Read)
	TXT(Write)
	TXT(Rename)
	TXT(Delete)			;Directory connect
	TXT(Unknown)
	TXT(Directory)
	TXT(Submit)
	TXT(Execute)
SUBTTL	CHKUSR Connection verification routine

;CHKUSR - Called at interrupt level from D$OPEN to validate connect

;ACCEPTS	Connect info stored per pointers in D$OPEN request

;Returns TRUE	S1/ User number
;		S2/ Directory number

;	 FALSE	S1/ NSP reason code
;		S2/ Pointer to reason string

CHKUSR:	STKVAR	<<ACBLK,3>,USRNUM,<DIRPSW,10>>	;[0031] Allocate local variables
	MOVX	S1,RC%EMO		;Require exact match
	HRROI	S2,SRVUSR		;POINT TO USER NAME GIVEN
	SETZM	T1			;GOOD FORM
	RCUSR				;CHECK USER NUMBER
	  ERJMP	CKUER1			;BAD USER NAME
	JUMPE	T1,CKUER1		;...
	MOVEM	T1,USRNUM		;SAVE USER NUMBER FOR CHKACC
	MOVE	S2,T1			;GET IN PROPER AC FOR RCDIR
	SETZM	T1			;GOOD FORM
	RCDIR				;GET DIRECTORY FOR THIS USER
	  ERJMP	CKUER1			;CAN'T HAPPEN
	JUMPE	T1,CKUER1		;BAD DIRECTORY HERE
	MOVEM	T1,.ACDIR+ACBLK		;[0031] SAVE DIRECTORY NUMBER
	MOVE	S1,.ACDIR+ACBLK		;[0031] GET DIRECTORY NUMBER
	MOVEI	S2,DIRBLK		;POINT TO THE BLOCK
	MOVEI	T1,.CDDAC+1		;GET LENGTH OF ARGUMENT BLOCK
	MOVEM	T1,.CDLEN(S2)		;SAVE FOR THE CALL
	HRROI	T1,SRVACT		;POINT TO ACCOUNT STRING
	SKIPN	SRVACT			;ALREADY SPECIFIED?
	MOVEM	T1,.CDDAC(S2)		;NO, GET DEFAULT FROM DIRECTORY IF ANY
	HRROI	T1,DIRPSW		;POINT TO PASSWORD STRING
	GTDIR				;GET ALL THE DIRECTORY STUFF
	  ERJMP	CKUER1			;GIVE UP

;HERE TO CHECK PASSWORD
CHKUPW:	HRROI	S1,SRVPSW		;[0031] Get pointer to users password
	MOVEM	S1,.ACPSW+ACBLK		;[0031] Save it for ACCES function
	SETOM	.ACJOB+ACBLK		;[0031] Default to our job number
	MOVX	S1,AC%PWD+3		;[0031] Want password validation fcn
	MOVEI	S2,ACBLK		;[0031] Address of arg block
	ACCES				;[0031] Validate the password
	 ERJMP	CHKU.1			;[0031] Failed,,try string compare
	JRST	CHKUAC			;[0031] Win,,compare account strings

CHKU.1:	HRROI	S1,DIRPSW		;HERE IS ACCES FAILS SINCE THE
	HRROI	S2,SRVPSW		;ACCES FUNCTION TO VALIDATE PSW'S
	STCMP				;MAY NOT BE IMPLEMENTED IN THIS MONITOR
	JUMPN	S1,CKUER2		;FAIL IF NOT EXACT

;HERE IF PASSWORDS MATCH TO VALIDATE THE ACCOUNTING DATA
CHKUAC:	MOVE	S1,.ACDIR+ACBLK		;[0031] GET DIRECTORY NUMBER
	HRROI	S2,SRVACT		;POINT TO REMOTE ACCOUNT STRING
	VACCT				;VALIDATE THE ACCOUNT
	  ERJMP	CKUER3			;NOT VALID
	MOVE	S1,USRNUM		;Return user number
	MOVE	S2,.ACDIR+ACBLK		;[0031] Return directory number
	$RETT				;Return success


;HERE IF ERROR VALIDATING USER
CKUER1:	SKIPA	S2,[TXT(Invalid user-id)]
CKUER2:	MOVX	S2,TXT(Invalid password)
	MOVX	S1,.DCX34		;Generic error type
	$RETF				;Return the failure

CKUER3:	MOVX	S1,.DCX36		;ERROR FOR BAD ACCOUNT
	MOVX	S2,TXT(Invalid account)
	$RETF				;Return the failure
SUBTTL	CREFRK	Fork creation and initializtion

;ACCEPTS	No arguments

;RETURNS TRUE	S1/ Count of active forks
;		    Fork has been started

;	 FALSE	Server fork could not be started

CREFRK:	MOVSI	T2,-MAXSRV
	SKIPN	FRKTBL(T2)		;Fork available?
	JRST	CREFR1			;Yes..use it
	AOBJN	T2,.-2			;No..look at next slot
	$RETF				;No more forks available

CREFR1:	MOVX	S1,CR%CAP+CR%ACS	;[0025]Allow forks capabilities
	SETZ	S2,			;[0025]POINT AT MY ACS
	CFORK
	 ERJMP	.RETF			;Give Up if CFORK fails
	AOS	FRKCNT			;Bump active fork count
	MOVEM	S1,FRKTBL(T2)		;Save fork handle
	HRLZ	S2,S1			;Set up to Map my pages
	MOVSI	S1,.FHSLF		;Map my address space
	MOVX	T1,PM%RD!PM%EX!PM%CPY!PM%CNT!NFKPGS
	PMAP
	 ERJMP	CREFR2
	HRRZ	S1,FRKTBL(T2)		;Start the fork as a server
	MOVEI	S2,[JRST SRV]
	SFORK
	 ERJMP	CREFR2
	MOVE	S1,FRKCNT		;Return count of active forks
	$RETT

CREFR2:	HRRZ	S1,T2			;Get fork index
	$CALL	KILFRK			;Kill the fork
	$RETF				;Return the failure
SUBTTL	KILFRK	Routine to kill a server

;ACCEPTS	S1/ index into FRKTBL

;RETURNS TRUE	S1/ Number of active forks
;		Fork has been killed

KILFRK:	SETZ	T2,			;Set up to clear and fetch
	EXCH	T2,FRKTBL(S1)		;Get the fork stuff
	HRRZ	S1,T2			;Get the fork handle
	HLRZ	S2,T2			;Get offset to page
	KFORK
	 ERJMP	.+1			;Can't happen
KILFR1:	SOS	S1,FRKCNT		;Decr active fork count
	$RETT				;Return
SUBTTL	LOGSNM	Routine to log system name

LOGSNM:	STKVAR	<<SYSNAM,20>>		;Get some space for system name
	MOVX	S1,'SYSVER'		;NAME OF GETTAB FOR SYSNAME
	SYSGT				;GET IT
	HRLZ	T1,S2			;GET TABLE#,,0
	MOVEI	T2,SYSNAM		;Point to name storage
	HRLI	T2,-20			;GET COUNT
LOGSN1:	MOVS	S1,T1			;GET N,,TABLE#
	GETAB				;GET THE ENTRY
	  MOVEI	S1,0			;USE ZERO IF LOSING
	MOVEM	S1,(T2)			;STORE THE RESULT
	ADDI	T1,1			;POINT TO NEXT ENTRY
	AOBJN	T2,LOGSN1		;GET IT
	HRROI	S1,SYSNAM		;POINT TO THE NAME
	$TEXT	(,<^Q/S1/>)
	$RETT				;RETURN TRUE
SUBTTL	LOGMSG	Text output routine for Superior FAL

LOGMSG:	SKIPE	LOGHDR			;First time here
	JRST	LOGMS1			;No..proceed
	$TEXT	(LOGCHR,<^H/[-1]/^A>)	;Yes..write the header
	SKIPE	STREAM			;Am I inferior?
	$TEXT	(LOGCHR,< SRV-^D1/STREAM/  ^A>) ;Yes..log srv-n
	SKIPN	STREAM
	$TEXT	(LOGCHR,<	^A>)	;No..display a tab
	SETOM	LOGHDR
LOGMS1:	JUMPE	S1,LOGMS2		;End of message?
	SKIPL	LOGHDR			;Ready for indention?
	$TEXT	(LOGCHR,<		^A>) ;yes..do it
	SETOM	LOGHDR			;Clear indention flag
	CAIN	S1,.CHLFD		;Unless this is a line feed
	MOVNS	LOGHDR			; Store a +1
	PJRST	LOGCHR			;Log the character and return

LOGMS2:	SKIPG	LOGHDR			;Was the last thing a line feed?
	$TEXT	(LOGCHR,<>)		;No..write one
	SETZM	LOGHDR			;Clear the header flag
	$RETT				;And return

LOGCHR:	MOVE	S2,S1			;No..move character to S2
	SKIPL	S1,LOGIFN
	$CALL	F%OBYT			;Write the character
	$RETT
SUBTTL	MSGCHR	Text output routine routine for inferior servers

MSGCHR:	SKIPE	LOGHDR			;First time here?
	JRST	MSGCH1			;Store the character
	MOVE	S2,[POINT 7,MSGTXT]	;Point to IPCF message block
	MOVEM	S2,MSGPTR		;Store the pointer
	MOVEI	S2,MSGSIZ		;Get max character count
	MOVEM	S2,MSGCNT		;Store the count
	SETOM	LOGHDR			;Flag headers set
MSGCH1:	SOSLE	MSGCNT			;Bump character count
	IBP	MSGPTR			;Bump the pointer
	DPB	S1,MSGPTR		;Store the character
	JUMPN	S1,.RETT		;Return if not null
	IDPB	S1,MSGPTR		;Store the null
	SETZM	LOGHDR			;Clear the log header flag
MSGCH2:	MOVEI	S1,MT.TXT		;Get text message type
	MOVEM	S1,MSGHDR		;Store it in header
	MOVEI	S1,.CMTXT		;Get text argument type
	MOVEM	S1,MSGARH		;Store in Argument header
	MOVE	S1,MSGPTR		;Get message pointer
	MOVEI	S1,-MSGARC(S1)		;Get argument length
	HRLM	S1,MSGARH		;Save size in arg header
	AOS	MSGARC			;Increment argument count
	ADDI	S1,MSGARH-MSGHDR	;Get size of message
	HRLM	S1,MSGHDR		;Save in the header
	MOVEI	S2,MSGHDR		;Point to the message
	PJRST	SNDFAL			;Send the message to FAL
	$RETT
SUBTTL	SNDFAL	Routine to send IPCF packet to FAL

;ACCEPTS	S1/ Length of message
;		S2/ Address of message

SNDFAL:	MOVE	T1,FALPID
	MOVEM	T1,SNDSAB+SAB.PD	;Send only to FAL
SNDMSG:	MOVE	T1,STREAM		;Get my stream number
	MOVEM	T1,.MSCOD(S2)		;Save in message
	MOVEM	S1,SNDSAB+SAB.LN	;Store the length
	MOVEM	S2,SNDSAB+SAB.MS	;Store the address
	MOVEI	S1,SAB.SZ
	MOVEI	S2,SNDSAB
	$CALL	C%SEND
	$RETT				;Don't care about failures
	
;RELJFN		QUICKY ROUTINE TO RELEASE ALL NON-OPEN JFNS
;ACCEPTS	NO ARGUMENTS
;RETURNS	TRUE ALWAYS

CLSJFN::SKIPA	S1,[EXP CZ%ABT!.FHSLF]	;ABORT ALL FILE OPERATIONS
RELJFN::MOVX	S1,CZ%NCL!.FHSLF	;RELEASE ALL NON-OPEN JFNS
	CLZFF
	 ERJMP	.+1			;Ignore any errors
	$RETT				;RETURN

;CPYSTR		QUICKY ROUTINE TO COPY ASCIZ TEXT

;ACCEPTS	S1/ DESTINATION POINTER
;		S2/ SOURCE POINTER

CPYSTR:	SETZ	T1,			;Terminate on Null
	SOUT
	$RET
SUBTTL	PSIINI	Software interrupt system initialization

PSIINI:	MOVEI	S1,.FHSLF		;Initialize for me
	MOVE	S2,[LEVTAB,,CHNTAB]	;Point to tables
	SIR
	MOVX	S2,1B<.ICIPC>!1B<.ICCDN>!1B<.ICDAV>!1B<.ICIMA>!1B<.ICIFT>
	AIC				;Turn on selected channels
	EIR				;Enable requests
	$RETT

SUBTTL	Interrupt service routines

INTPSI:	$BGINT	1
	$CALL	C%INTR			;Flag the message
	$DEBRK

INTCDN:	$BGINT	1
	MOVEI	S1,SRVLNK		;POINT TO OUR LINK
	MOVEI	S2,.DICDN		;Get interrupt cause
	$CALL	D$INTR
	$DEBRK

INTDAV:	$BGINT	1
	MOVEI	S1,SRVLNK		;POINT TO OUR LINK
	MOVEI	S2,.DIDAV		;Get interrupt cause
	$CALL	D$INTR
	$DEBRK

INTINA:	$BGINT	1
	MOVEI	S1,SRVLNK		;POINT TO OUR LINK
	MOVEI	S2,.DIINA		;Get interrupt cause
	$CALL	D$INTR
	$DEBRK

INTIFT:	$BGINT	1			;Inferior fork termination
	SETOM	FRKFLG			;Request fork status check
	$DEBRK				;Dismiss for now
SUBTTL	Literals

;Dump the literals

	LSTOF.
	LIT
	LSTON.
SUBTTL	Interrupt tables

	.PSECT	DATA			;Load into impure storage

LEVTAB:	LEV1PC
	EXP  0
	EXP  0

;INTERRUPT CHANNELS

RADIX 5+5

CHNTAB:
ICHPSI:	1,,INTPSI			;PSI interrupts
ICHDAV:	1,,INTDAV			;Data available
ICHCDN:	1,,INTCDN			;Connect/Disconnect
ICHINA:	1,,INTINA			;Interrupt message
ICH004:	BLOCK 1				;ASSIGNABLE CHANNEL 4
ICH005:	BLOCK 1				;ASSIGNABLE CHANNEL 5
ICHAOV:	BLOCK 1				;ARITHMETIC OVERFLOW
ICHFOV:	BLOCK 1				;FLOATING OVERFLOW
ICH008:	BLOCK 1				;RESERVED
ICHPOV:	BLOCK 1				;PDL OVERFLOW
ICHEOF:	BLOCK 1				;END OF FILE
ICHDAE:	BLOCK 1				;DATA ERROR
ICHQTA:	BLOCK 1				;QUOTA EXCEEDED
ICH013:	BLOCK 1				;RESERVED
ICHTOD:	BLOCK 1				;TIME OF DAY (RESERVED)
ICHILI:	BLOCK 1				;ILLEG INSTRUCTION
ICHIRD:	BLOCK 1				;ILLEGAL READ
ICHIWR:	BLOCK 1				;ILLEGAL WRITE
ICHIEX:	BLOCK 1				;ILLEGAL EXECUTE (RESERVED)
ICHIFT:	1,,INTIFT			;INFERIOR FORK TERMINATION
ICHMSE:	BLOCK 1				;MACHINE SIZE EXCEEDED
ICHTRU:	BLOCK 1				;TRAP TO USER (RESERVED)
ICHNXP:	BLOCK 1				;NONEXISTENT PAGE REFERENCED
ICH023:	BLOCK 1				;ASSIGNABLE CHANNEL 23
ICH024:	BLOCK 1				;ASSIGNABLE CHANNEL 24
ICH025:	BLOCK 1				;ASSIGNABLE CHANNEL 25
ICH026:	BLOCK 1				;ASSIGNABLE CHANNEL 26
ICH027:	BLOCK 1				;ASSIGNABLE CHANNEL 27
ICH028:	BLOCK 1				;ASSIGNABLE CHANNEL 28
ICH029:	BLOCK 1				;ASSIGNABLE CHANNEL 29
ICH030:	BLOCK 1				;ASSIGNABLE CHANNEL 30
ICH031:	BLOCK 1				;ASSIGNABLE CHANNEL 31
ICH032:	BLOCK 1				;ASSIGNABLE CHANNEL 32
ICH033:	BLOCK 1				;ASSIGNABLE CHANNEL 33
ICH034:	BLOCK 1				;ASSIGNABLE CHANNEL 34
ICH035:	BLOCK 1				;ASSIGNABLE CHANNEL 35

RADIX 8

	.ENDPS	DATA
SUBTTL	IMPURE	Storage

	.PSECT	DATA

DEFINE	$DATA (NAME,SIZE<1>) <
 NAME:	BLOCK SIZE
	 ..LOC==.>


$DATA	FRKTBL,MAXSRV			;LH offset to fork data pages
$DATA	STREAM,1			;My stream number
$DATA	FALPID,1			;Fal's pid
$DATA	MESSAG,1			;Address of latest IPCF message
$DATA	FRKFLG,1			;-1 to check fork status
$DATA	FRKCNT,1			;Count of active forks
$DATA	SLPTIM,1			;Max time to sleep in main loop
$DATA	LOGIFN,1			;Logfile IFN
					;RH fork handle

$DATA	DATORG,0				;Start of area to clear

;Interrupt PC locations

$GDATA	LEV1PC,1			;RETURN PC FOR INTERRUPT LEVEL 1

$DATA	PDL,PDLEN			;PUSH DOWN POINTER

$DATA	SRVOBJ,5			;Requested object name

$DATA	SRVBEG,0			;Start of area to clear for SRV
$DATA	SRVNOD,2			;Remote node name
$DATA	SRVUSR,^D8			;[0026]Remote user name
$DATA	SRVPSW,^D8			;[0026]Remote password string
$DATA	SRVACT,^D8			;[0026]Remote account string
$DATA	SRVOPD,5			;Optional data
$DATA	SRVFIL,FILSIZ			;Remote file spec
$DATA	DIRBLK,.CDDAC+1			;Size of directory storage
	SRVSIZ==.-SRVBEG

$DATA	REMSWS,1			;Remote file switches


$DATA	SNDSAB,SAB.SZ
$DATA	MSGPTR,1			;Pointer to log message char
$DATA	MSGCNT,1			;Remaining room in MSGTXT

;IPCF message area

$DATA	MSGHDR,MSHSIZ			;Message header area
$DATA	MSGARF				;Message argument flags
$DATA	MSGARC				;Message argument count
$DATA	MSGARH				;Message argument header
$DATA	MSGTXT,<MSGSIZ/5+1>		;Message body goes here
$DATA	ERRTXT,^D30			;Room to store error text

$DATA	LOGHDR,1			;LOG HEADER FLAG

	.ENDPS	DATA			;End of Impure storage

	END	<3,,ENTVEC>