Google
 

Trailing-Edge - PDP-10 Archives - BB-T573C-DD_1986 - 2,5/path.hlp
There are 7 other files named path.hlp in the archive. Click here to see a list.
1.0  DEFAULT PATH COMMANDS:


     .PATH [newpath]/switches
    -or-
     .PATH =name:/switches

where  "newpath"  is  the  desired   default   path,   "name"   is   a
(path-defined)  logical name, and "switches" may be one or more of the
following:


/SCAN       Enable scanning.

/NOSCAN     Disable scanning.

/SYS        Enable auto search of [1,4].

/NOSYS      Disable auto search of [1,4].

/NEW        Enable auto search of [1,5].

/NONEW      Disable auto search of [1,5].

/UP:n       Ascend n levels of SFDs.

/DOWN:list Append the list of SFDs to the current path.


The effect of the /UP and /DOWN switches may also  be  obtained  using
the following command form:
            .PATH ascenders descenders switches

where "switches" can be any of the switches listed above,  "ascenders"
is  as  many  "<"  characters  as  SFD  levels you wish to ascend, and
"descenders" is a ">" character followed by a list of SFDs  to  append
to  your  path  (after  the  effect  of the ascenders, if any).  Legal
separators in the SFD list in the "descenders" field are:   ",",  ".",
and ">".






2.0  SEARCH LIST COMMANDS:

(System search list commands require that your job be privileged)

            .PATH/switches

where "switches" may be one or more of the following:

/ADD:list       Add the structures specified by list to the job search
                list.

/REMOVE:list    Remove the structures specified by list from  the  job
                search list.

/CREATE:list    Create a new  job  search  list  consisting  of  those
                structures in list.

/MODIFY:list    Modify the  structures  in  the  job  search  list  as
                specified by list.

/SADD:list      Add the structures specified by  list  to  the  system
                search list.

/SREMOVE:list   Remove the  structures  specified  by  list  from  the
                system search list.

/SCREATE:list   Create a new system search list  consisting  of  those
                structures in list.

/SMODIFY:list   Modify the structures in the  system  search  list  as
                specified by list.


The same search list switch may appear more than once in a command but
the effect is the same as if the user had specified all the structures
in one switch.  ADD, REMOVE, and MODIFY switches may  appear  together
in  any  combination,  but  CREATE may not be combined with any of the
above switches.  Regardless of the position of the  REMOVE,  ADD,  and
MODIFY  switches,  PATH  will  always  process them in the order given
above.  PATH does not set  the  search  list  once  for  each  switch.
Instead,  it  starts  with the search list at the time the program was
run, removes the structures specified by the REMOVE switches, adds the
structures  specified  by  the  ADD switches, and finally modifies any
structures specified by the MODIFY switches.  This means that the  ADD
switches  may  add  structures  added  by  the REMOVE switches and the
MODIFY switches may not find a structure  removed  with  REMOVE.   The
argument  to  the  search list switches is an ordered list of elements
which represent the structures on which to  act.   If  more  that  one
element  is  specified,  they  must  be  enclosed  in  parenthesis and
separated by commas.  Each element has the form:

                name:modifier:modifier...

where name is the name of a structure (e.g.,  DSKB),  an  abbreviation
for  a structure name (e.g., DS), or an asterisk (*).  PATH interprets
an asterisk to mean the search list at the time the  program  was  run
minus any structures from the current search list that were explicitly
given in the switch.  The structure modifiers may be one  or  more  of
the following:

WRITE       Write enable the specified structure

NOWRITE     Write lock the specified structure

CREATE      Allow file creation on the specified structure  when  DSK:
            is specified in an OPEN.

NOCREATE    Allow file creation on the  specified  structure  only  if
            it's name is explicitly given in an OPEN.



3.0  LOGICAL PATH NAME COMMANDS:


.PATH name:/switches=dev:file.ext[path],dev:file.ext[path],...

where  "name"  is  the  name  of  a  logical  path   name   and   each
"dev:file.ext[path]"  are the components of that logical name.  If the
device of a logical path name component  has  an  implied  PPN  or  is
itself a logical name, PATH will ignore any directory specified by the
user and substitute the implied ppn or the body of  the  logical  path
name  in  its  place.   In  the latter case, any filename or extension
specified in the  component  being  defined  are  overwritten  by  the
filename  or  extension  from the substituted body of the logical path
name.  The filename or extension are not overwritten if  there  is  no
corresponding field in the substituted body or if the /OVERRIDE switch
was specified in  the  definition  of  the  logical  path  name  being
substituted.

If the component of a  logical  path  name  is  defined  using  "[,]",
"[,pn]",  or  "[p,]",  PATH  does not substitute the current login PPN
when defining the logical path name.  Instead, the  monitor  does  the
substitution  at  the  time  of  the use of the logical path name.  In
general, this is not a problem, unless the user's PPN changes  between
the  definition  of  the  logical  path  name  and  the use of it.  To
indicate that a logical path name was defined  in  this  manner,  PATH
will list the path of each component of a logical path name in exactly
the same way that it was defined.

If no components are specified to the right of  the  equal  sign,  the
definition of the existing logical name will be deleted.

"Switches" may be one of the following:

   /SEARCH     - Enable auto search of the components of this  logical
                 name if no file is found on a LOOKUP/enter to generic
                 device DSK:.  (This is similar  to  the  SETSRC  /LIB
                 attribute  although  they are implemented differently
                 so  that  the  old  SETSRC  /LIB  attribute  operates
                 consistently  with  previous  monitors).  The /SEARCH
                 attribute may apply to only one logical path name and
                 implicitly  deletes  the  SETSRC  /LIB definition, if
                 any.

   /NOSEARCH   - Remove the above attribute.

   /OVERRIDE   - If this logical name is specified to OPEN  a  channel
                 and  a  LOOKUP, ENTER, etc.  is done that specifies a
                 filename  or  extension,  ignore  the  filename   and
                 extension  in  the LOOKUP, ENTER, etc.  block and use
                 the values  from  the  logical  name  component.   In
                 addition,  this  switch  controls  the  way that path
                 substitutes logical name bodies during the definition
                 of a logical names as described above.

   /NOOVERRIDE - Remove the above attribute.

An existing logical name may have the  SEARCH  or  OVERRIDE  attribute
changed with the following command:

            .PATH name:/[NO]switch

The following switch alters the definition of logical path  names  but
may  not  appear in conjunction with any other logical name command or
switch:

            /CLEAR - Clear all logical name definitions.






4.0  LISTING PATHS, SEARCH LISTS, AND LOGICAL PATH NAMES:


The following switches may be placed anywhere on the command  line  or
in SWITCH.INI:

/LIST:CHANGE    List only those things changed in the current command.

/LIST:PATH      List the default path, path switches, and  the  SETSRC
                style /LIB setting (default).

/LIST:JSL       List the job search list.

/LIST:SSL       List the system search list.

/LIST:NAMES     List the logical path name definitions.

/LIST:ALL       List all of the above.

/LIST           Same  as   /LIST:CHANGE.    (Exception:    .PATH   and
                .PATH/LIST are treated as .PATH/LIST:PATH).

/NOLIST         Don't list anything.



Any of the above PATH functions may be combined in  the  same  command
string (with the exceptions specifically noted above).  Note that PATH
uses SCAN to interpret the command string so that  all  SCAN  defaults
with regard to "sticky" devices and PPNs apply.