Google
 

Trailing-Edge - PDP-10 Archives - BB-T573C-DD_1986 - 10,7/who.man
There are 4 other files named who.man in the archive. Click here to see a list.


     
















                                      WHO MANUAL


                               Reflects version 4(155)
                                      March 1982




                                   William S. Meier
                            Digital Equipment Corporation
                           Internal Software Support Group


                            Table of contents for WHO.MAN



   CHAPTER 1       COMMAND FORMAT

           1.1     SPECIFICATIONS . . . . . . . . . . . . . . . . . . 1-1
           1.2     LOGICAL OPERATORS  . . . . . . . . . . . . . . . . 1-1


   CHAPTER 2       JOB MODE

           2.1     SELECTION SWITCHES . . . . . . . . . . . . . . . . 2-1
           2.1.1     /ACCOUNT:"string"  . . . . . . . . . . . . . . . 2-1
           2.1.2     /ACTIVE and /NOACTIVE  . . . . . . . . . . . . . 2-1
           2.1.3     /AUTODIALER and /NOAUTODIALER  . . . . . . . . . 2-1
           2.1.4     /BADGE:nn  . . . . . . . . . . . . . . . . . . . 2-1
           2.1.5     /BATCH and /NOBATCH  . . . . . . . . . . . . . . 2-2
           2.1.6     /BBATCH and /NOBBATCH  . . . . . . . . . . . . . 2-2
           2.1.7     /BEFORE:date:time  . . . . . . . . . . . . . . . 2-2
           2.1.8     /CAPABILITY:(key,key)  . . . . . . . . . . . . . 2-2
           2.1.9     /CATEGORY:oo . . . . . . . . . . . . . . . . . . 2-3
           2.1.10    /CHARGE:ss . . . . . . . . . . . . . . . . . . . 2-3
           2.1.11    /CID:ss  . . . . . . . . . . . . . . . . . . . . 2-3
           2.1.12    /CLASS:nn  . . . . . . . . . . . . . . . . . . . 2-3
           2.1.13    /CORE:nn:mm  . . . . . . . . . . . . . . . . . . 2-3
           2.1.14    /CTLJOB:nn . . . . . . . . . . . . . . . . . . . 2-3
           2.1.15    /CTLPRG:ss . . . . . . . . . . . . . . . . . . . 2-3
           2.1.16    /CTY or /NOCTY . . . . . . . . . . . . . . . . . 2-4
           2.1.17    /DIALUP and /NODIALUP  . . . . . . . . . . . . . 2-4
           2.1.18    /DDB:filespec  . . . . . . . . . . . . . . . . . 2-4
           2.1.19    /DDT or /NODDT . . . . . . . . . . . . . . . . . 2-4
           2.1.20    /DETACH or /DETACH:oo or /NODETACH . . . . . . . 2-4
           2.1.21    /DEVICE:ss . . . . . . . . . . . . . . . . . . . 2-4
           2.1.22    /DSKPRIORITY:n or /DSKPRIORITY . . . . . . . . . 2-4
           2.1.23    /FILE:filespec . . . . . . . . . . . . . . . . . 2-5
           2.1.24    /GANDALF and /NOGANDALF  . . . . . . . . . . . . 2-5
           2.1.25    /GLXOPR:key or /GLXOPR . . . . . . . . . . . . . 2-5
           2.1.26    /HARDWIRED and /NOHARDWIRED  . . . . . . . . . . 2-5
           2.1.27    /HPQ:n or /HPQ . . . . . . . . . . . . . . . . . 2-5
           2.1.28    /JOB:n . . . . . . . . . . . . . . . . . . . . . 2-5
           2.1.29    /JSTATUS:(key,key) . . . . . . . . . . . . . . . 2-6
           2.1.30    /LOCAL and /NOLOCAL  . . . . . . . . . . . . . . 2-6
           2.1.31    /LOCATE:oo or /LOCATE  . . . . . . . . . . . . . 2-6
           2.1.32    /LPPN:[p,pn] . . . . . . . . . . . . . . . . . . 2-6
           2.1.33    /MOUNT:ss  . . . . . . . . . . . . . . . . . . . 2-7
           2.1.34    /NAME:"ss" . . . . . . . . . . . . . . . . . . . 2-7
           2.1.35    /NODE:ssll or /NODE:ss  . . . . . . . . . . . . 2-7
           2.1.36    /NOOPERATOR  . . . . . . . . . . . . . . . . . . 2-7
           2.1.37    /OPERATOR:key  . . . . . . . . . . . . . . . . . 2-7
           2.1.38    /PFH or /NOPFH . . . . . . . . . . . . . . . . . 2-7
           2.1.39    /PIVOTED and /NOPIVOTED  . . . . . . . . . . . . 2-8
           2.1.40    /PPN:[p,pn]  . . . . . . . . . . . . . . . . . . 2-8
           2.1.41    /PRIVILEGE:(key,key) . . . . . . . . . . . . . . 2-8
           2.1.42    /PRGRUN:ss . . . . . . . . . . . . . . . . . . . 2-8
                                                                  Page ii


           2.1.43    /PROGRAM:ss  . . . . . . . . . . . . . . . . . . 2-9
           2.1.44    /PTY:oo or /PTY or /NOPTY  . . . . . . . . . . . 2-9
           2.1.45    /RBEFORE:date:time . . . . . . . . . . . . . . . 2-9
           2.1.46    /REMOTE and /NOREMOTE  . . . . . . . . . . . . . 2-9
           2.1.47    /RSINCE:date:time  . . . . . . . . . . . . . . . 2-9
           2.1.48    /SEGMENT:ss  . . . . . . . . . . . . . . . . . . 2-9
           2.1.49    /SELF and /NOSELF  . . . . . . . . . . . . . . . 2-9
           2.1.50    /SINCE:date:time . . . . . . . . . . . . . . .  2-10
           2.1.51    /SLOT:nn . . . . . . . . . . . . . . . . . . .  2-10
           2.1.52    /STATE:(key,key) . . . . . . . . . . . . . . .  2-10
           2.1.53    /STREAM:n  . . . . . . . . . . . . . . . . . .  2-10
           2.1.54    /SWAP:key  . . . . . . . . . . . . . . . . . .  2-10
           2.1.55    /TSN and /NOTSN  . . . . . . . . . . . . . . .  2-11
           2.1.56    /TTY:oo or /TTY or /NOTTY  . . . . . . . . . .  2-11
           2.1.57    /VCORE:nn:mm . . . . . . . . . . . . . . . . .  2-11
           2.1.58    /VM and /NOVM  . . . . . . . . . . . . . . . .  2-11
           2.1.59    /WHEELED and /NOWHEELED  . . . . . . . . . . .  2-11
           2.1.60    /WSCODE:ss . . . . . . . . . . . . . . . . . .  2-11
           2.1.61    /WTO:key or /WTO . . . . . . . . . . . . . . .  2-12
           2.2     TYPEOUT SWITCHES . . . . . . . . . . . . . . . .  2-12
           2.2.1     /DDBS  . . . . . . . . . . . . . . . . . . . .  2-12
           2.2.2     /DPY:n:m . . . . . . . . . . . . . . . . . . .  2-12
           2.2.3     /ERNONE  . . . . . . . . . . . . . . . . . . .  2-12
           2.2.4     /FAST  . . . . . . . . . . . . . . . . . . . .  2-13
           2.2.5     /FILES . . . . . . . . . . . . . . . . . . . .  2-13
           2.2.6     /FORMAT:(format-list)  . . . . . . . . . . . .  2-13
           2.2.7     /INCLUDE:key . . . . . . . . . . . . . . . . .  2-13
           2.2.8     /INCREMENTAL and /NOINCREMENTAL  . . . . . . .  2-13
           2.2.9     /INFORMATION:keys  . . . . . . . . . . . . . .  2-14
           2.2.10    /MAP . . . . . . . . . . . . . . . . . . . . .  2-14
           2.2.11    /NORMAL  . . . . . . . . . . . . . . . . . . .  2-14
           2.2.12    /OKNONE  . . . . . . . . . . . . . . . . . . .  2-15
           2.2.13    /ORIGIN and /NOORIGIN  . . . . . . . . . . . .  2-15
           2.2.14    /PERFORMANCE and /NOPERFORMANCE  . . . . . . .  2-15
           2.2.15    /PRINT and /NOPRINT  . . . . . . . . . . . . .  2-15
           2.2.16    /REPEAT:N:M  . . . . . . . . . . . . . . . . .  2-15
           2.2.17    /SLOW  . . . . . . . . . . . . . . . . . . . .  2-16
           2.2.18    /SORT:key:x:n or /SORT:key . . . . . . . . . .  2-16
           2.2.19    /STAMP and /NOSTAMP  . . . . . . . . . . . . .  2-17
           2.2.20    /SUMMARY:key . . . . . . . . . . . . . . . . .  2-18
           2.2.21    /TOTALS and /NOTOTALS  . . . . . . . . . . . .  2-19
           2.2.22    /VFAST . . . . . . . . . . . . . . . . . . . .  2-19


   CHAPTER 3       LINE MODE

           3.1     SELECTION SWITCHES . . . . . . . . . . . . . . . . 3-1
           3.1.1     /AUTODIALER and /NOAUTODIALER  . . . . . . . . . 3-1
           3.1.2     /ASSIGN and /NOASSIGN  . . . . . . . . . . . . . 3-1
           3.1.3     /CARRIER and /NOCARRIER  . . . . . . . . . . . . 3-1
           3.1.4     /CTY or /NOCTY . . . . . . . . . . . . . . . . . 3-1
           3.1.5     /DIALUP and /NODIALUP  . . . . . . . . . . . . . 3-2
           3.1.6     /GANDALF and /NOGANDALF  . . . . . . . . . . . . 3-2
           3.1.7     /HARDWIRED and /NOHARDWIRED  . . . . . . . . . . 3-2
           3.1.8     /INITED and /NOINITED  . . . . . . . . . . . . . 3-2
                                                                 Page iii


           3.1.9     /JOB:n . . . . . . . . . . . . . . . . . . . . . 3-2
           3.1.10    /LOCAL and /NOLOCAL  . . . . . . . . . . . . . . 3-2
           3.1.11    /LOCATE:"string" . . . . . . . . . . . . . . . . 3-2
           3.1.12    /MIC and /NOMIC  . . . . . . . . . . . . . . . . 3-3
           3.1.13    /NODE:ssll or /NODE:ss  . . . . . . . . . . . . 3-3
           3.1.14    /PHONE:"aa"  . . . . . . . . . . . . . . . . . . 3-3
           3.1.15    /PTY:oo or /PTY or /NOPTY  . . . . . . . . . . . 3-3
           3.1.16    /RCVSPEED:n  . . . . . . . . . . . . . . . . . . 3-3
           3.1.17    /REMOTE AND /NOREMOTE  . . . . . . . . . . . . . 3-3
           3.1.18    /SLAVE and /NOSLAVE  . . . . . . . . . . . . . . 3-4
           3.1.19    /SPEED:n . . . . . . . . . . . . . . . . . . . . 3-4
           3.1.20    /TSN and /NOTSN  . . . . . . . . . . . . . . . . 3-4
           3.1.21    /TTY:oo or /TTY or /NOTTY  . . . . . . . . . . . 3-4
           3.1.22    /TYPE:ss . . . . . . . . . . . . . . . . . . . . 3-4
           3.1.23    /USER and /NOUSER  . . . . . . . . . . . . . . . 3-4
           3.1.24    /XMTSPEED:n  . . . . . . . . . . . . . . . . . . 3-4
           3.2     TYPEOUT SWITCHES . . . . . . . . . . . . . . . . . 3-5
           3.2.1     /DPY:n:m . . . . . . . . . . . . . . . . . . . . 3-5
           3.2.2     /ERNONE  . . . . . . . . . . . . . . . . . . . . 3-5
           3.2.3     /FAST  . . . . . . . . . . . . . . . . . . . . . 3-5
           3.2.4     /INCLUDE:key . . . . . . . . . . . . . . . . . . 3-5
           3.2.5     /INCREMENTAL and /NOINCREMENTAL  . . . . . . . . 3-5
           3.2.6     /INFORMATION:keys  . . . . . . . . . . . . . . . 3-6
           3.2.7     /MAP . . . . . . . . . . . . . . . . . . . . . . 3-6
           3.2.8     /NORMAL  . . . . . . . . . . . . . . . . . . . . 3-6
           3.2.9     /OKNONE  . . . . . . . . . . . . . . . . . . . . 3-6
           3.2.10    /PERFORMANCE and /NOPERFORMANCE  . . . . . . . . 3-6
           3.2.11    /PRINT and /NOPRINT  . . . . . . . . . . . . . . 3-7
           3.2.12    /REPEAT:N:M  . . . . . . . . . . . . . . . . . . 3-7
           3.2.13    /SLOW  . . . . . . . . . . . . . . . . . . . . . 3-7
           3.2.14    /SORT:key:x:n or /SORT:key . . . . . . . . . . . 3-7
           3.2.15    /STAMP and /NOSTAMP  . . . . . . . . . . . . . . 3-8
           3.2.16    /SUMMARY:key . . . . . . . . . . . . . . . . . . 3-8
           3.2.17    /TOTALS and /NOTOTALS  . . . . . . . . . . . . . 3-9
           3.2.18    /VFAST . . . . . . . . . . . . . . . . . . . . . 3-9


   CHAPTER 4       FORMATTING THE DISPLAY

           4.1     FORMAT LIST  . . . . . . . . . . . . . . . . . . . 4-1
           4.2     FORMAT LIST SWITCHES . . . . . . . . . . . . . . . 4-1
           4.2.1     /FINAL:(format-list) . . . . . . . . . . . . . . 4-1
           4.2.2     /FOOTING:(format-list) . . . . . . . . . . . . . 4-2
           4.2.3     /HEADING:(format-list) . . . . . . . . . . . . . 4-2
           4.2.4     /INITIAL:(format-list) . . . . . . . . . . . . . 4-2
           4.2.5     /FORMAT:(format-list)  . . . . . . . . . . . . . 4-2
           4.3     DEFAULT FORMAT CONTROL . . . . . . . . . . . . . . 4-2
           4.3.1     /BLANK . . . . . . . . . . . . . . . . . . . . . 4-3
           4.3.2     /DEFAULT . . . . . . . . . . . . . . . . . . . . 4-3
           4.3.3     /FIX . . . . . . . . . . . . . . . . . . . . . . 4-3
           4.3.4     /FLOAT . . . . . . . . . . . . . . . . . . . . . 4-3
                                                                  Page iv


   CHAPTER 5       ACTION SWITCHES

           5.1     INPUT/OUTPUT FUNCTIONS . . . . . . . . . . . . . . 5-1
           5.1.1     /FORCE:command . . . . . . . . . . . . . . . . . 5-1
           5.1.2     /INPUT:"string"  . . . . . . . . . . . . . . . . 5-2
           5.1.3     /OUTPUT:"string" . . . . . . . . . . . . . . . . 5-2
           5.1.4     /SEND:"string" . . . . . . . . . . . . . . . . . 5-2
           5.2     NETWORK FUNCTIONS  . . . . . . . . . . . . . . . . 5-2
           5.2.1     /NETWORK:CONNECT . . . . . . . . . . . . . . . . 5-2
           5.2.2     /NETWORK:DISCONNECT  . . . . . . . . . . . . . . 5-2
           5.3     SETUUO FUNCTIONS . . . . . . . . . . . . . . . . . 5-2
           5.3.1     CPU:n  . . . . . . . . . . . . . . . . . . . . . 5-3
           5.3.2     DEFAULT:BUFFERS:n  . . . . . . . . . . . . . . . 5-3
           5.3.3     DEFAULT:PROTECTION:n . . . . . . . . . . . . . . 5-3
           5.3.4     DEFER:key  . . . . . . . . . . . . . . . . . . . 5-3
           5.3.5     DSKFUL:key . . . . . . . . . . . . . . . . . . . 5-3
           5.3.6     LIMIT:hh:mm:ss . . . . . . . . . . . . . . . . . 5-3
           5.3.7     PHYSICAL:key:n . . . . . . . . . . . . . . . . . 5-3
           5.3.8     TIME:hh:mm:ss  . . . . . . . . . . . . . . . . . 5-4
           5.3.9     VIRTUAL:n  . . . . . . . . . . . . . . . . . . . 5-4
           5.3.10    WATCH:(keys) . . . . . . . . . . . . . . . . . . 5-4


   CHAPTER 6       OUTPUT FILE CONTROL

           6.1     FILE SPECIFICATION DEFAULTS  . . . . . . . . . . . 6-1
           6.2     SWITCHES . . . . . . . . . . . . . . . . . . . . . 6-1
           6.2.1     /APPEND and /NOAPPEND  . . . . . . . . . . . . . 6-1
           6.2.2     /ERSUPERSEDE . . . . . . . . . . . . . . . . . . 6-1
           6.2.3     /OKSUPERSEDE . . . . . . . . . . . . . . . . . . 6-1
           6.2.4     /PROTECTION:n  . . . . . . . . . . . . . . . . . 6-2
           6.2.5     /VERSION:x . . . . . . . . . . . . . . . . . . . 6-2


   APPENDIX A      JOB STATE CODES


   APPENDIX B      INFORMATION DISPLAYS

           B.1     ACCOUNT  . . . . . . . . . . . . . . . . . . . . . B-1
           B.2     BATCH  . . . . . . . . . . . . . . . . . . . . . . B-1
           B.3     CAPABILITIES . . . . . . . . . . . . . . . . . . . B-1
           B.4     CHANNEL  . . . . . . . . . . . . . . . . . . . . . B-2
           B.5     CORE . . . . . . . . . . . . . . . . . . . . . . . B-2
           B.6     DDBS . . . . . . . . . . . . . . . . . . . . . . . B-2
           B.6.1     DSK DDB information  . . . . . . . . . . . . . . B-3
           B.6.2     MTA DDB information  . . . . . . . . . . . . . . B-3
           B.6.3     NET DDB information  . . . . . . . . . . . . . . B-3
           B.6.4     TSK DDB information  . . . . . . . . . . . . . . B-3
           B.6.5     TTY DDB information  . . . . . . . . . . . . . . B-4
           B.7     DEFAULTS . . . . . . . . . . . . . . . . . . . . . B-4
           B.8     IPCF . . . . . . . . . . . . . . . . . . . . . . . B-4
           B.9     JSL  . . . . . . . . . . . . . . . . . . . . . . . B-4
           B.10    LOGICAL  . . . . . . . . . . . . . . . . . . . . . B-5
           B.11    MTA  . . . . . . . . . . . . . . . . . . . . . . . B-5
                                                                   Page v


           B.12    ORIGIN . . . . . . . . . . . . . . . . . . . . . . B-5
           B.13    PATH . . . . . . . . . . . . . . . . . . . . . . . B-6
           B.14    PRIVILEGES . . . . . . . . . . . . . . . . . . . . B-6
           B.15    SIZE . . . . . . . . . . . . . . . . . . . . . . . B-6
           B.16    SPOOL  . . . . . . . . . . . . . . . . . . . . . . B-6
           B.17    TIME . . . . . . . . . . . . . . . . . . . . . . . B-7
           B.18    TMPCOR . . . . . . . . . . . . . . . . . . . . . . B-7











                                      CHAPTER 1

                                    COMMAND FORMAT



   .WHO file=spec                  !(default JOB mode)
   .WHO:LINE file=spec             !(LINE mode)
   .WHO:JOB file=spec              !(JOB mode)

   A mode can also be selected by the use of the /MODE switch which takes arguments
   WHO,  JOB, or LINE.  JOB mode primarily selects jobs, and lists attributes about
   them, such as users PPN, name,  program,  runtime,  etc.   LINE  mode  primarily
   selects  lines,  and  lists attributes about them, such as node, line, speed and
   terminal type.



   1.1  SPECIFICATIONS

   SPEC is a list of commands, each separated by commas, optionally followed  by  a
   list of switches.
   FILE is a standard file specification, to be used as the  output  specification.
   The default is TTY:WHO.LST[-].

   The following specifications have the following switch equivalents:
   Command Switch      Function
   n       /JOB:n      Select job n
   #n      /TTY:n      Select job on TTYn
   [p,pn]  /PPN:[p,pn] Select all ppns that match wildcarding
   mmmm    /NAME:mmmm  Select jobs with user name MMMM
   dev:    /DEVICE:dev Select jobs using DEV:



   1.2  LOGICAL OPERATORS

   The following SCAN logical operators can be used by WHO to control the selection
   of objects.

           'OR'        Select thing if matches spec A 'OR' spec B
           'AND'       Select thing if matches spec A 'AND' spec B
           'NOT'       Select thing if matches spec A 'NOT' spec B












                                      CHAPTER 2

                                       JOB MODE



   2.1  SELECTION SWITCHES

   The following switches can be included on the command line to  select  different
   classes  of  jobs.   None  of  these switches are global, they apply only to the
   current specification.  Multiple specifications are separated by commas.



   2.1.1  /ACCOUNT:"string"

   This switch selects jobs with the specified account string.  The account  string
   can  be up to 39 characters, optionally containing wildcards (?  and *).  If the
   account string contains blanks or other non-alpha numeric characters, it must be
   inclosed  in  quotations.   The  syntax  /ACCOUNT:""  selects jobs with the null
   account string.



   2.1.2  /ACTIVE and /NOACTIVE

   This switch selects active jobs.  An active job is defined  as  currently  using
   system  resources  or  the  CPU,  as  opposed  to waiting for terminal input, or
   sleeping or hibernating.  /NOACTIVE selects jobs which are not active.



   2.1.3  /AUTODIALER and /NOAUTODIALER

   This switch selects jobs that are on an autodialer line.  /NOAUTODIALER  selects
   jobs that are not on autodialer lines.



   2.1.4  /BADGE:nn

   This switch selects jobs that are logged in with the DEC badge number nn.
   JOB MODE                                                                Page 2-2
   SELECTION SWITCHES


   2.1.5  /BATCH and /NOBATCH

   This switch selects batch jobs running under BATCON, or MIC.   /NOBATCH  selects
   jobs that are not batch jobs.



   2.1.6  /BBATCH and /NOBBATCH

   This switch selects jobs that are running  in  the  background  batch  scheduler
   class  (if  one  has  been  defined).  This does not imply nor select batch jobs
   implicitly.  /NOBBATCH selects jobs that are not running in the background batch
   scheduler class.



   2.1.7  /BEFORE:date:time

   This switch selects jobs that have logged in before the specified date and time.
   Date and time can be any one of the standard formats.



   2.1.8  /CAPABILITY:(key,key)

   This  switch  selects  jobs  with  the  specified  capability  bits.    Multiple
   capability  bits  can  be  specified  by  including  a  list of keys inclosed in
   parentheses,  and  separated  by  commas.   An  optional  NO  can  precedes  any
   capability   bit   to   mean   not   the   specified  capability.   For  example
   /CAPABILITY:(POKE,NORTTRP) selects jobs who have POKE capability and do not have
   RTTRP capability.  A complete list of the CAPABILITY keys follows:

           CHGPPN      Change PPN (projects .GT.  10) privilege
           CPU         Ability to change CPU specifications
           DISK        Ability to set disk priority greater than 0
           ENQ         Ability to do privileged ENQ/DEQ functions
           HPQ         Ability to set high priority queue greater than 0
           IPCF        Ability to do IPCF privileged functions
           LOCK        Ability to LOCK in core
           METER       Ability to use METER UUO
           NETEXAM     Ability to do network examines (for NTRACK)
           POKE        Ability to use POKE UUO
           RTTRP       Ability to use RTTRP UUO
           SPYALL      Ability to SPY on all of core
           SPYMON      Ability to SPY on monitor low segment
           TRPSET      Ability to use TRPSET UUO
           UNSPOOL     Ability to unspool spooled devices
   JOB MODE                                                                Page 2-3
   SELECTION SWITCHES


   2.1.9  /CATEGORY:oo

   This switch selects jobs that are in job category oo.  OO is an  octal  category
   from 0 to 777.



   2.1.10  /CHARGE:ss

   This switch selects jobs that are logged in with the specified charge number ss.
   SS is a sixbit word with optional ?  and * wildcarding.



   2.1.11  /CID:ss

   This switch selects jobs that are logged in with the specified charge ID ss.  SS
   is a sixbit word with optional ?  and * wildcarding.



   2.1.12  /CLASS:nn

   This switch selects jobs that are in scheduler class nn.  NN is a decimal number
   from 0 to 31.



   2.1.13  /CORE:nn:mm

   This switch selects jobs whose core size (sum of the low and  high  segments  in
   pages)  is  in  the range specified by nn and mm.  NN and MM are decimal numbers
   from 0 to 511.  If :mm is omitted (eg /CORE:nn), jobs whose core size is  nn  or
   larger  are selected.  If nn is omitted, and mm is specified (eg /CORE::mm) jobs
   whose core size is less than or equal to mm are selected.



   2.1.14  /CTLJOB:nn

   This switch selects jobs who are being controlled by job number  nn.   NN  is  a
   decimal  number.   Typically, these are jobs on a PTY controlled by BATCON, MIC,
   or OPSER.



   2.1.15  /CTLPRG:ss

   This switch selects jobs who are being controlled by program ss.  SS is a sixbit
   word  with  optional  ?   and * wildcarding.  Typically, these are jobs on a PTY
   controlled by BATCON, MIC, or OPSER.
   JOB MODE                                                                Page 2-4
   SELECTION SWITCHES


   2.1.16  /CTY or /NOCTY

   This switch selects the job (if any) on the CTY, the console  terminal.   /NOCTY
   selects jobs that are not on the CTY (ie jobs on PTYs, TTYs, and detached).



   2.1.17  /DIALUP and /NODIALUP

   This switch selects jobs that are on dialup terminals.  /NODIALUP  selects  jobs
   that are not on dialup terminals.



   2.1.18  /DDB:filespec

   This switch selects jobs that have a DDB (device data block) for  the  specified
   file specification.  The file specification can include device, file, extension,
   and PPN.  File, extension, and PPN can be optionally wildcarded with  ?   and  *
   characters.   If  any  part of the specification is omitted, it is considered to
   match.  If the device name is exactly three characters long, it will  match  any
   device starting with those three characters.



   2.1.19  /DDT or /NODDT

   This switch selects jobs that have DDT in their address space (.JBDDT non-zero).
   /NODDT selects jobs that do not have DDT in their address space.



   2.1.20  /DETACH or /DETACH:oo or /NODETACH

   This switch selects jobs that are detached, ie not attached to  any  controlling
   terminal.   If  oo  is  specified,  jobs  who detached from terminal line oo are
   selected.  /NODETACH selects jobs that are not detached (ie jobs on PTYs,  TTYs,
   and CTY).



   2.1.21  /DEVICE:ss

   This switch selects the job (if any) that  has  device  ss  assigned  or  inited
   (opened).



   2.1.22  /DSKPRIORITY:n or /DSKPRIORITY

   This switch selects jobs with disk priority n.  N is a decimal number from -3 to
   3.  If :n is omitted any job with a disk priority greater than 0 is selected.
   JOB MODE                                                                Page 2-5
   SELECTION SWITCHES


   2.1.23  /FILE:filespec

   This switch selects jobs that have a DDB (device data block) for  the  specified
   file specification.  The file specification can include device, file, extension,
   and PPN.  File, extension, and PPN can be optionally wildcarded with  ?   and  *
   characters.   If  any  part of the specification is omitted, it is considered to
   match.  If the device name is exactly three characters long, it will  match  any
   device starting with those three characters.



   2.1.24  /GANDALF and /NOGANDALF

   This switch selects jobs that are on gandalf switched lines.  /NOGANDALF selects
   jobs that are not on gandalf switched lines.



   2.1.25  /GLXOPR:key or /GLXOPR

   This switch selects jobs that have Galaxy operator privileges.  Legal  keys  can
   be one of:

           HOST        Host operator privileges
           NONE        No operator privileges
           REMOTE      Remote operator privileges
           SYSTEM      System operator privileges

   If no keyword is present, all jobs with any operator privileges are selected.



   2.1.26  /HARDWIRED and /NOHARDWIRED

   This switch selects jobs that are on hardwired lines.  /NOHARDWIRED selects jobs
   that are not on hardwired lines.



   2.1.27  /HPQ:n or /HPQ

   This switch selects jobs running in high priority  queue  n.   N  is  a  decimal
   number  from 0 to 15.  If :n is omitted any job in a high priority queue greater
   than 0 is selected.



   2.1.28  /JOB:n

   This switch selects job n.  N is a decimal number greater than 0.
   JOB MODE                                                                Page 2-6
   SELECTION SWITCHES


   2.1.29  /JSTATUS:(key,key)

   This switch selects jobs with the specified job status attributes.  Multiple job
   status  attributes  can  be  specified  by  including a list of keys inclosed in
   parentheses, and separated by commas.  An optional NO can precedes any attribute
   to  mean  not  the  specified  attribute.   For example /JSTATUS:(JACCT,NOXONLY)
   selects jobs who are JACCTed and that are not execute only.  A complete list  of
   the job status attributes follows:

           CMDWAIT     Jobs waiting to have a command processed
           DCORE       Jobs doing a DCORE command
           DSKFUL      Jobs with DSKFUL PAUSE set
           JACCT       Jobs with JACCT set
           LOCK        Jobs locked in core
           MONERR      Jobs with a monitor detected error
           OPRWAIT     Jobs waiting for operator action
           RUN         Jobs with the run bit set
           SWAP        Jobs swapped out
           XONLY       Jobs that are execute only



   2.1.30  /LOCAL and /NOLOCAL

   This switch selects jobs running on local terminals.   Local  terminals  implies
   the "TTY NO REMOTE" setting rather than non-network terminals.  /NOLOCAL selects
   jobs not running on local terminals (eg remote terminals).



   2.1.31  /LOCATE:oo or /LOCATE

   This switch selects jobs who are logically located to node oo.  OO is  an  octal
   number  from 0 to 77.  The special case of 0 selects jobs who are located to the
   central site, and if :oo is omitted, jobs who are  logically  located  to  where
   their terminal is physically connected to are selected.



   2.1.32  /LPPN:[p,pn]

   This switch selects jobs with the specified logged-in PPN.  The logged-in PPN is
   the  PPN  the  job  logged  in  under, and remains the same if the job WHEELs or
   PIVOTs into another PPN.  PPN may be wildcarded with ?  and *  characters.   The
   constructions  [,pn],  [p,],  and  [,]  can  be  also  be used.  However, [-] is
   illegal.
   JOB MODE                                                                Page 2-7
   SELECTION SWITCHES


   2.1.33  /MOUNT:ss

   This switch selects jobs with file structure ss  mounted  (eg  in  their  search
   list).   SS must be a legal structure name.  This does not imply that these jobs
   have open files on the structure (see /FILE or /DDB for that function).



   2.1.34  /NAME:"ss"

   This switch selects jobs logged in in the specified name ss.  If ss  contains  n
   characters,  the  jobs  with user names who start with the first n characters of
   the users switch are selected.  Blanks are treated as  matching  any  character,
   and  if  ss  contains  blanks  or  more than 6 characters it must be inclosed in
   quotations.



   2.1.35  /NODE:ss_ll or /NODE:ss

   This switch selects  jobs  whose  terminals  are  physically  connected  to  the
   specified  node  ss  and  line  ll.   ss  is  a node name with optional ?  and *
   wildcarding, and ll is an octal line number.  If only a node name  is  specified
   any  jobs  whose  terminals  are  physically  connected  to node ss are selected
   regardless of their line number.



   2.1.36  /NOOPERATOR

   This switch selects jobs which are not operator jobs.  Operator jobs are defined
   as  jobs  with  PPN  [1,2] or [1nn,2] where nn is the node number for the remote
   operator.



   2.1.37  /OPERATOR:key

   This switch selects jobs as specified by the key.  KEY may be one of

           LOCAL       to select only [1,2] operator jobs
           NO          to select jobs that are neither local or remote operators
           REMOTE      to select only [1nn,2] operator jobs
           YES         to select either local or remote operator jobs



   2.1.38  /PFH or /NOPFH

   This switch selects jobs that have a page fault handler in their  address  space
   (.JBPFH  non  zero).  /NOPFH selects jobs that do not have page fault handler in
   their address space.
   JOB MODE                                                                Page 2-8
   SELECTION SWITCHES


   2.1.39  /PIVOTED and /NOPIVOTED

   This switch selects jobs that are pivoted into another PPN.  PIVOTed is  defined
   as the logged in PPN not equal to the current PPN.  /NOPIVOTED selects jobs that
   are not pivoted.



   2.1.40  /PPN:[p,pn]

   This switch selects jobs with the specified PPN.  PPN may be wildcarded  with  ?
   and  *  characters.  The constructions [,pn], [p,], and [,] can be also be used.
   However, [-] is illegal.



   2.1.41  /PRIVILEGE:(key,key)

   This switch selects jobs with the specified privilege bits.  Multiple  privilege
   bits  can  be specified by including a list of keys inclosed in parentheses, and
   separated by commas.  An optional NO can precedes any privilege bit to mean  not
   the specified privilege.  For example /PRIVILEGE:(POKE,NORTTRP) selects jobs who
   have POKE privileges and do not have RTTRP privileges.  A complete list  of  the
   privilege keys follows:

           CHGPPN      Change PPN (projects .GT.  10) privilege
           CPU         Ability to change CPU specifications
           DISK        Ability to set disk priority greater than 0
           ENQ         Ability to do privileged ENQ/DEQ functions
           HPQ         Ability to set high priority queue greater than 0
           IPCF        Ability to do IPCF privileged functions
           LOCK        Ability to LOCK in core
           METER       Ability to use METER UUO
           NETEXAM     Ability to do network examines (for NTRACK)
           POKE        Ability to use POKE UUO
           RTTRP       Ability to use RTTRP UUO
           SPYALL      Ability to SPY on all of core
           SPYMON      Ability to SPY on monitor low segment
           TRPSET      Ability to use TRPSET UUO
           UNSPOOL     Ability to unspool spooled devices



   2.1.42  /PRGRUN:ss

   This switch selects jobs with program to run set to be ss.  SS is a sixbit  word
   with optional ?  and * wildcarding.
   JOB MODE                                                                Page 2-9
   SELECTION SWITCHES


   2.1.43  /PROGRAM:ss

   This switch selects jobs whose program name is ss.  SS is  a  sixbit  name  with
   optional ?  and * wildcarding.



   2.1.44  /PTY:oo or /PTY or /NOPTY

   This switch selects the job (if any) running on pseudo-terminal (PTY)  line  oo.
   OO  is  an octal terminal number from 0 to the number of legal PTYs minus 1.  If
   :oo is omitted, jobs running on any PTY are selected.  /NOPTY selects jobs  that
   are not on a PTY ie jobs on TTYs, CTY and detached).



   2.1.45  /RBEFORE:date:time

   This switch selects jobs that have done a RESET UUO before  the  specified  date
   and  time.  Typically programs do a RESET as soon as they are started.  Date and
   time can be in any of the standard formats.



   2.1.46  /REMOTE and /NOREMOTE

   This switch selects jobs running on remote terminals.  Remote terminals  implies
   the  "TTY REMOTE" setting rather than network terminals.  /NOREMOTE selects jobs
   not running on remote terminals (eg local terminals).



   2.1.47  /RSINCE:date:time

   This switch selects jobs who have done a RESET UUO since the specified date  and
   time.   Typically  jobs do a RESET when they first start running.  Date and time
   can be in any of the standard formats.



   2.1.48  /SEGMENT:ss

   This switch selects jobs with high segment name ss.  SS is a  sixbit  word  with
   optional  ?  and * wildcarding.  The special names (OLD) for old/superseded high
   segments, and (PRIV), for private non-sharable high segments can also be used.



   2.1.49  /SELF and /NOSELF

   This switch selects jobs who are logged in with the same PPN as the current job.
   /NOSELF selects all jobs not logged in with the current jobs PPN.
   JOB MODE                                                               Page 2-10
   SELECTION SWITCHES


   2.1.50  /SINCE:date:time

   This switch selects jobs who have logged in since the specified date  and  time.
   Date and time may be in any of the standard formats.



   2.1.51  /SLOT:nn

   This switch selects jobs with an output distribution slot number nn.   NN  is  a
   decimal number from 0 to 511.



   2.1.52  /STATE:(key,key)

   This switch selects jobs with  the  specified  state  classes.   Multiple  state
   classes  can  be  specified by including a list of keys inclosed in parentheses,
   and separated by commas.  An optional NO can precedes any state  class  to  mean
   not  the  specified  state class.  For example /STATE:(EVENTWAIT,NOSWAP) selects
   jobs that are in an wait state and are not swapped out.  A complete list of  the
   state class keys follows:

           ACTIVE      Select active (running, or otherwise active) jobs
           CODES       Selects jobs in state codes (see S.MAC)
           EVENTWAIT   Select jobs in one of the event wait states
           IOWAIT      Select jobs in an I/O wait state
           LOCK        Select jobs locked in core
           QUEUES      Selects jobs in queues (see S.MAC)
           RWAITS      Selects jobs in resource wait (see S.MAC)
           RUN         Select jobs in a processor run queue
           SLEEP       Select jobs hibernating, sleeping, or napping
           STOP        Select jobs that are stopped
           SWAP        Select jobs that are swapped out



   2.1.53  /STREAM:n

   This switch selects the job that is in batch stream number "n", where "n"  is  a
   decimal  number greater than or equal to zero.  (Valid only under Galaxy version
   4.1 and later)



   2.1.54  /SWAP:key

   This switch selects the job that the swapper is currently dealing with.  KEY can
   be one of the following:

           FIT         to select the job trying to be fit into core
           FORCE       to select the job trying to be forced out
           IN          to select the job currently being swapped in
           OUT         to select the job currently being swapped out
   JOB MODE                                                               Page 2-11
   SELECTION SWITCHES


   2.1.55  /TSN and /NOTSN

   This switch selects jobs on TSN controlled lines.  /NOTSN selects jobs that  are
   not on TSN controlled lines.



   2.1.56  /TTY:oo or /TTY or /NOTTY

   This switch selects the job (if any) running on terminal (TTY) line oo.   OO  is
   an  octal  terminal  number  from  0 to the number of legal terminals (including
   PTYs) minus 1.  If :oo is omitted, jobs running on any TTY (not CTY or PTY)  are
   selected.   /NOTTY  selects  jobs  that are not on TTYs (ie jobs on PTYS, CTY or
   detached).



   2.1.57  /VCORE:nn:mm

   This switch selects jobs whose virtual core  size  (sum  of  the  low  and  high
   segments  in  pages)  is  in  the  range  specified by nn and mm.  NN and MM are
   decimal numbers from 0 to 511.  If :mm is omitted  (eg  /VCORE:nn),  jobs  whose
   core  size  is nn or larger are selected.  If nn is omitted, and mm is specified
   (eg /VCORE::mm) jobs whose core size is less than or equal to mm are selected.



   2.1.58  /VM and /NOVM

   This switch selects jobs that are running virtual.  Virtual is  defined  as  any
   job  whose  physical  core  core  does  not  equal its virtual core size.  /NOVM
   selects jobs that are not virtual.



   2.1.59  /WHEELED and /NOWHEELED

   This switch selects jobs that are WHEELed into [1,2].  WHEELed is defined as the
   logged  in  PPN  not  equal  to  [1,2], but with the current PPN equal to [1,2].
   /NOWHEELED selects jobs that are not wheeled.



   2.1.60  /WSCODE:ss

   This switch selects jobs with wait state code ss.  SS can be a two  letter  code
   (TO,  R2,  HB,  etc), or a quoted string such as "TO SW" which requires an exact
   match for swapped out jobs in terminal output wait.  For a complete list of wait
   state codes see Appendix A.
   JOB MODE                                                               Page 2-12
   SELECTION SWITCHES


   2.1.61  /WTO:key or /WTO

   This switch selects jobs with the specified WTO (Write To Operator)  privileges.
   The legal keys are

           ALL         All privileges (WTO and WTOR)
           NONE        No WTO privileges
           WTO         Only WTO privileges

   If no key is specified, jobs with any WTO or WTOR privileges are selected.



   2.2  TYPEOUT SWITCHES

   The following switches can be included on the command line to control the format
   of  the  job  mode  output.  In all cases, these switches are global, and can be
   specified anywhere in the command line and have the same effect.



   2.2.1  /DDBS

   This switch displays the DDBs for the selected jobs.  A DDB  is  a  device  data
   block,  and  one  exists  for  every  open file, or assigned device that the job
   controls.  For more information on the format of the output from the /DDBS refer
   to Appendix B under /INFORMATION:DDBS.



   2.2.2  /DPY:n:m

   This switch displays the selected jobs on a video  terminal  in  DPY  mode  with
   cursor  update  of  the  data.  If :n is specified, n is treated as a sleep scan
   between display updates.  The default is 10 seconds.  If :n is 0, DPY mode  will
   not  be  selected.   If  :M is specified, m in the number of times to repeat the
   display.  The default is to repeat forever.  While in DPY  mode,  the  following
   single characters can be typed to control the output on the display:  more



   2.2.3  /ERNONE

   This switch generates a fatal error when no jobs match the selection  criterion.
   Either  "?WHONTM  Job  number  not  assigned"  or  "?WHOARC All jobs rejected by
   constraints" message is generated as appropriate.  The default is to  issue  the
   standard message "No one".
   JOB MODE                                                               Page 2-13
   TYPEOUT SWITCHES


   2.2.4  /FAST

   This switch displays fast information about the selected jobs.  This information
   is in the format:

   17 MEIER,BILL   TTY43  WHO    R1

   The information displayed is  the  job  number  (17),  user  name  (MEIER,BILL),
   terminal name (TTY43), program name (WHO), and job state (R1).



   2.2.5  /FILES

   This switch displays the DDBs for the selected jobs.  A DDB  is  a  device  data
   block,  and  one  exists  for  every  open file, or assigned device that the job
   controls.  For more information on the format of  the  output  from  the  /FILES
   refer to Appendix B under /INFORMATION:DDBS.



   2.2.6  /FORMAT:(format-list)

   This switch can be used to completely control the  information  displayed  about
   each  job  in  the  format  desired.   For  more  information,  see  the chapter
   "FORMATTING THE DISPLAY".



   2.2.7  /INCLUDE:key

   This switch selects the inclusion of additional information in  the  job  format
   display.   The current keys are FUNNY, to include pages of funny space allocated
   to the job.



   2.2.8  /INCREMENTAL and /NOINCREMENTAL

   This switch selects the display of incremental job information  for  the  fields
   that  are  incremental  in  nature.   /NOINCREMENTAL  displays the total fields.
   Fields that are incremental are batch time limit, IPCF messages  received,  IPCF
   messages   sent,   uuos   executed,   CPU  runtime,  kilo-core-seconds,  virtual
   kilo-core-seconds, disk blocks read, disk blocks written, time since last  RESET
   UUO,  and  jobs  logged in time.  If /REPEAT or /DPY are specified, it should be
   noted that the first display will have zeros for all the incremental fields,  as
   no previous values are available to compute them.
   JOB MODE                                                               Page 2-14
   TYPEOUT SWITCHES


   2.2.9  /INFORMATION:keys

   This switch displays addition information about the selects jobs as specified by
   the  keys.   Typically  this information is one or more additional line per key.
   Legal keys are:

           ACCOUNT     Display jobs account string
           BATCH       Display jobs batch and operator information
           CAPABILITY  Display the jobs DEC and local capability bits
           CORE        Display virtual and physical core limits for the job.
           CHANNELS    Display information about each open channel for the job
           DDBS        Display the DDBS for the job
           DEFAULTS    Display the jobs SET DEFAULT parameters
           IPCF        Display IPCF message statistics and quotas
           JSL         Display the jobs search list and switch settings
           LOGICAL     Display the jobs pathological names
           MTA         Display information about each MTA the job has in use
           ORIGIN      Display the low and high segment origin and version
           PATH        Display the jobs current path
           PRIVILEGES  Display the jobs DEC and local privilege bits
           SIZE        Display information about open file sizes and dates
           SPOOL       Display the spooled devices and spooling status
           TIME        Displays the jobs logged in and reset time and date.
           TMPCOR      Display a directory of the jobs TMPCOR files

   For more information about the format of each detailed display, see Appendix B.



   2.2.10  /MAP

   This switch displays the line mode information about the job that was  selected.
   The  line  mode information is for the terminal that is controlling the job.  If
   it is detached, no additional information is printed.



   2.2.11  /NORMAL

   This  switch  displays  normal  information  about  the  selected  jobs.    This
   information is in the format:

   17 MEIER,BILL       10,3146  TTY43  WIZARD 1    WHO    26+33     R2    0:05:08

   The information displayed is  the  job  number  (17),  user  name  (MEIER,BILL),
   project  programmer  number (10,3146), terminal name (TTY43), node name and line
   number (WIZARD_1), program name (WHO), low+high segment core size  (26+33),  job
   state (R2), and cpu runtime (0:05:08).
   JOB MODE                                                               Page 2-15
   TYPEOUT SWITCHES


   2.2.12  /OKNONE

   This switch requests that no message be printed when no jobs match the selection
   criterion.  The default is to issue the standard message "No one".



   2.2.13  /ORIGIN and /NOORIGIN

   This switch displays the complete file specification of the origin of  the  high
   and  low segment of the jobs program.  The low and high version numbers are also
   displayed.



   2.2.14  /PERFORMANCE and /NOPERFORMANCE

   This switch displays performance ratios with various fields related to the  job.
   The current ratios are:

           DSK/C       disk blocks read and written per CPU second of runtime
           DSK/E       disk blocks read and written per elapsed second
           UUOS/C      UUOS executed per CPU second of runtime
           UUOS/E      UUOs executed per elapsed second
           CPU/E       CPU to elapsed time percentage ratio

   If /INCREMENTAL is  also  specified,  the  performance  statistics  reflect  the
   previous  incremental  interval  only, rather than since the job has been logged
   in.



   2.2.15  /PRINT and /NOPRINT

   This switch controls the output of the job line when used  in  conjunction  with
   the  /MAP  or  /SUMMARY switch.  If /MAP and /PRINT (default) is given, both the
   job and line mode information is printed, and if /NOPRINT  is  given,  only  the
   line mode information is printed.  If /SUMMARY and /PRINT is given, the selected
   jobs will be output, as well  as  the  summary  at  the  end,  and  if  /NOPRINT
   (default) is given, only the summary information will be displayed.



   2.2.16  /REPEAT:N:M

   This switch repeats the display of  the  selected  jobs  at  the  selected  time
   interval.   If  :n  is  specified,  n is treated as a sleep scan between display
   updates.  The default is 10 seconds.  If :n  is  0,  repeat  mode  will  not  be
   selected.   If  :M is specified, m in the number of times to repeat the display.
   The default is to repeat forever.
   JOB MODE                                                               Page 2-16
   TYPEOUT SWITCHES


   2.2.17  /SLOW

   This switch displays slow information about the selected jobs.  This information
   is in the format:

   17 MEIER,BILL       10,3146  TTY43  WIZARD 1    WHO    26+33     R2    0:05:08
        RD:6452   WR:2441   UUOS:32535   JLT:2:19:18   PC:422017 

   The information displayed is  the  job  number  (17),  user  name  (MEIER,BILL),
   project  programmer  number (10,3146), terminal name (TTY43), node name and line
   number (WIZARD_1), program name (WHO), low+high segment core size  (26+33),  job
   state  (R2),  cpu  runtime  (0:05:08),  disk  blocks read (RD:6452), disk blocks
   written (WR:2441), uuos executed (UUOS:32535), job logged in time (JLT:2:19:18),
   program  counter  (PC:422017).   Other  information  (if  non-zero)  may be also
   displayed, which can be disk priority  (DPR:2),  high  priority  queue  (HPQ:1),
   paging rate (PGR:4.23), and batch time limit (LIM:0:3:20).



   2.2.18  /SORT:key:x:n or /SORT:key

   This switch displays jobs in sorted order as specified by the switch  arguments.
   KEY  is  the field to sort on.  If :x is specified, x can be either ASCENDING or
   DESCENDING to control the sort, and if :n is present, only the  first  (last)  N
   jobs will be output.  The legal sort keys are:

           ACCOUNT     Sort by the first five characters of the account string
           APC         Sort by the jobs asynchronous port characteristics
           BADGE       Sort by jobs DEC badge number
           BATCH       Sort by batch job flag (no/yes)
           BATCORE     Sort by jobs batch core maximum
           CATEGORY    Sort by jobs login category
           CHARGE      Sort by jobs charge number
           CID         Sort by jobs charge ID.
           CLASS       Sort by jobs scheduler class
           CORE        Sort by jobs core size (sum low+high segment)
           CTLJOB      Sort by controlling job number
           CTLPRG      Sort by controlling jobs program name
           DEFATTACH   Sort by jobs default attach setting (yes/no)
           DEFBUFFER   Sort by jobs default number of buffers setting
           DEFPROTECT  Sort by the jobs default protection setting
           DSKPRIORITY Sort by jobs dsk priority
           FUNNY       Sort by jobs funny page allocation
           GLXOPR      Sort by the jobs galaxy operator privilege
           HPQ         Sort by jobs high priority queue setting
           IPCFOREC    Sort by number of outstanding IPCF receives
           IPCFOSEND   Sort by number of outstanding IPCF sends
           IPCFQREC    Sort by IPCF receive quotas
           IPCFQSEND   Sort by IPCF send quotas
           IPCFREC     Sort by IPCF messages received
           IPCFSEND    Sort by IPCF messages sent
           JLT         Sort by jobs logged in time
           KCS         Sort by jobs kilo-core-seconds
           LIMIT       Sort by jobs batch time limit
   JOB MODE                                                               Page 2-17
   TYPEOUT SWITCHES


           LINE        Sort by jobs terminal line number
           LOCATION    Sort by jobs logically located node
           LPPN        Sort by jobs logged-in PPN (project-programmer number)
           LPRGNUM     Sort by jobs logged-in programmer number
           LPRJNUM     Sort by jobs logged-in project number
           NAME        Sort by the first six characters of the user name
           NODE        Sort  by  node  name  where  jobs  terminal  is   physically
                       connected
           NODENAME    Sort  by  node  name  where  jobs  terminal  is   physically
                       connected
           NODENUMBER  Sort by  node  number  where  jobs  terminal  is  physically
                       connected
           PAGERATE    Sort by jobs paging rate
           PC          Sort by jobs PC (program counter)
           PHYHIGH     Sort by jobs physical high segment size.
           PHYLOW      Sort by jobs physical low segment size.
           PPN         Sort by jobs PPN (project-programmer number)
           PRGNUMBER   Sort by jobs programmer number only
           PRGRUN      Sort by program to run
           PRJNUMBER   Sort by jobs project number only
           PROGRAM     Sort by jobs program name
           PROSET      Sort by jobs default protection set (yes/no)
           READS       Sort by number of disk blocks read
           REMOTE      Sort by jobs remote flag (no/yes)
           RESET       Sort by jobs RESET time
           RUNTIME     Sort by jobs CPU runtime
           SEGMENT     Sort by jobs high segment name
           SLOT        Sort by jobs distribution slot
           TTY         Sort by jobs terminal name
           UUOS        Sort by jobs executed UUO count
           VCORE       Sort by jobs virtual core size (sum low+high segments)
           VIRHIGH     Sort by jobs virtual high segment size.
           VIRLOW      Sort by jobs virtual low segment size.
           VKCS        Sort by jobs virtual kilo-core-seconds
           WRITES      Sort by number of disk blocks written
           WSCODE      Sort by jobs wait state code
           WTO         Sort by jobs WTO privileges

   If /INCREMENTAL is also specified, and the key  is  an  incremental  field,  the
   sorted order will reflect the intervals incremental values.



   2.2.19  /STAMP and /NOSTAMP

   This switch displays a date/time stamp at the top of the display of the selected
   jobs.
   JOB MODE                                                               Page 2-18
   TYPEOUT SWITCHES


   2.2.20  /SUMMARY:key

   This switch displays a summary of jobs by the selected key.  The specified field
   and  the  number  of  jobs  matching  that field is displayed, one line for each
   different value of the field.  If the field can be a large numeric value, it  is
   rounded off, and grouped into various buckets and displayed.

           ACCOUNT     Summarize by the first five characters of the account string
           APC         Summarize by the jobs asynchronous port characteristics
           BADGE       Summarize by jobs DEC badge number
           BATCH       Summarize by batch job flag (no/yes)
           BATCORE     Summarize by jobs batch core maximum
           CATEGORY    Summarize by jobs login category
           CHARGE      Summarize by jobs charge number
           CID         Summarize by jobs charge ID.
           CLASS       Summarize by jobs scheduler class
           CORE        Summarize by jobs core size (sum low+high segment)
           CTLJOB      Summarize by controlling job number
           CTLPRG      Summarize by controlling jobs program name
           DEFATTACH   Summarize by jobs default attach setting (yes/no)
           DEFBUFFER   Summarize by jobs default number of buffers setting
           DEFPROTECT  Summarize by the jobs default protection setting
           DSKPRIORITY Summarize by jobs dsk priority
           FUNNY       Summarize by jobs funny page allocation
           GLXOPR      Summarize by the jobs galaxy operator privilege
           HPQ         Summarize by jobs high priority queue setting
           IPCFOREC    Summarize by number of outstanding IPCF receives
           IPCFOSEND   Summarize by number of outstanding IPCF sends
           IPCFQREC    Summarize by IPCF receive quotas
           IPCFQSEND   Summarize by IPCF send quotas
           IPCFREC     Summarize by IPCF messages received
           IPCFSEND    Summarize by IPCF messages sent
           JLT         Summarize by jobs logged in time
           KCS         Summarize by jobs kilo-core-seconds
           LIMIT       Summarize by jobs batch time limit
           LINE        Summarize by jobs terminal line number
           LOCATION    Summarize by jobs logically located node
           LPPN        Summarize by jobs logged-in PPN (project-programmer number)
           LPRGNUM     Summarize by jobs logged-in programmer number
           LPRJNUM     Summarize by jobs logged-in project number
           NAME        Summarize by the first six characters of the user name
           NODE        Summarize by node name where  jobs  terminal  is  physically
                       connected
           NODENAME    Summarize by node name where  jobs  terminal  is  physically
                       connected
           NODENUMBER  Summarize by node number where jobs terminal  is  physically
                       connected
           PAGERATE    Summarize by jobs paging rate
           PC          Summarize by jobs PC (program counter)
           PHYHIGH     Summarize by jobs physical high segment size.
           PHYLOW      Summarize by jobs physical low segment size.
           PPN         Summarize by jobs PPN (project-programmer number)
           PRGNUMBER   Summarize by jobs programmer number only
           PRGRUN      Summarize by program to run
   JOB MODE                                                               Page 2-19
   TYPEOUT SWITCHES


           PRJNUMBER   Summarize by jobs project number only
           PROGRAM     Summarize by jobs program name
           PROSET      Summarize by jobs default protection set (yes/no)
           READS       Summarize by number of disk blocks read
           REMOTE      Summarize by jobs remote flag (no/yes)
           RESET       Summarize by jobs RESET time
           RUNTIME     Summarize by jobs CPU runtime
           SEGMENT     Summarize by jobs high segment name
           SLOT        Summarize by jobs distribution slot
           TTY         Summarize by jobs terminal name
           UUOS        Summarize by jobs executed UUO count
           VCORE       Summarize by jobs virtual core size (sum low+high segments)
           VIRHIGH     Summarize by jobs virtual high segment size.
           VIRLOW      Summarize by jobs virtual low segment size.
           VKCS        Summarize by jobs virtual kilo-core-seconds
           WRITES      Summarize by number of disk blocks written
           WSCODE      Summarize by jobs wait state code
           WTO         Summarize by jobs WTO privileges

   If /INCREMENTAL is also specified, and the key  is  an  incremental  field,  the
   summary display will reflect the intervals incremental values.



   2.2.21  /TOTALS and /NOTOTALS

   This switch selects whether or not a total line will be  generated.   The  total
   line is of the format "Total of n jobs" where n is the number of jobs that match
   the selection criterion.



   2.2.22  /VFAST

   This switch displays very  fast  information  about  the  selected  jobs.   This
   information is in the format:

   MEIER,BILL   TTY43

   The information displayed is user name (MEIER,BILL) and terminal name (TTY43).











                                      CHAPTER 3

                                      LINE MODE



   3.1  SELECTION SWITCHES

   The following switches can be included on the command line to  select  different
   classes  of  lines.   None  of these switches are global, they apply only to the
   current specification.  Multiple specifications are separated by commas.



   3.1.1  /AUTODIALER and /NOAUTODIALER

   This switch selects lines that have autodialers.   /NOAUTODIALER  selects  lines
   that don't have autodialers.



   3.1.2  /ASSIGN and /NOASSIGN

   This switch selects lines that are assigned by a job  with  the  monitor  assign
   command.  /NOASSIGN selects lines that are not assigned by a job.



   3.1.3  /CARRIER and /NOCARRIER

   This  switch  selects  lines  that  are  dialup  lines  with  carrier   present.
   /NOCARRIER selects lines that are dialup but without carrier present.



   3.1.4  /CTY or /NOCTY

   This switch selects the line of the CTY, the console terminal.   /NOCTY  selects
   all lines except the CTY (ie TTYs and PTYs).
   LINE MODE                                                               Page 3-2
   SELECTION SWITCHES


   3.1.5  /DIALUP and /NODIALUP

   This switch selects lines that are dialup lines.  /NODIALUP selects  lines  that
   are not dialup lines.



   3.1.6  /GANDALF and /NOGANDALF

   This switch selects gandalf switched lines.  /NOGANDALF selects  jobs  that  are
   not gandalf switched lines.



   3.1.7  /HARDWIRED and /NOHARDWIRED

   This switch selects hardwired lines.  /NOHARDWIRED selects lines  that  are  not
   hardwired.



   3.1.8  /INITED and /NOINITED

   This switch selects lines that are inited (opened) by a job with the OPEN, INIT,
   or FILOP.  UUO.  /NOINITED selects lines that are not inited by a job.



   3.1.9  /JOB:n

   This switch selects lines that are in use by job n.  The lines may be  assigned,
   inited, or otherwise in use by job n.



   3.1.10  /LOCAL and /NOLOCAL

   This switch selects local  terminals.   Local  terminals  implies  the  "TTY  NO
   REMOTE"  setting  rather than non-network terminals.  /NOLOCAL selects non-local
   terminals (eg remote terminals).



   3.1.11  /LOCATE:"string"

   This switch selects lines with the  specified  location  string.   The  location
   string  can  be up to 19 characters, optionally containing wildcards (?  and *).
   If the location string contains blanks or other non-alpha numeric characters, it
   must  be  inclosed  in  quotations.  The lines location string is defined by the
   system administrator in the binary file STD:LINES.INI which  relates  node  name
   and  line number to a location string, which generally describes the location of
   the terminal drop.
   LINE MODE                                                               Page 3-3
   SELECTION SWITCHES


   3.1.12  /MIC and /NOMIC

   This switch selects lines by are being controlled by MIC, ie MIC  is  typing  or
   otherwise controlling the input or output to the terminal.  /NOMIC selects lines
   not controlled by MIC.



   3.1.13  /NODE:ss_ll or /NODE:ss

   This switch selects lines who are physically connected to the specified node  ss
   and line ll.  ss is a node name with optional ?  and * wildcarding, and ll is an
   octal line number.  If  only  a  node  name  is  specified  any  lines  who  are
   physically connected to node ss are selected regardless of their line number.



   3.1.14  /PHONE:"aa"

   This switch selects dialup phone lines with the specified phone  number  string.
   The  phone  number  string  can  be  up  to 19 characters, optionally containing
   wildcards (?  and *).  If the phone  number  string  contains  blanks  or  other
   non-alpha  numeric  characters,  it  must  be inclosed in quotations.  The lines
   phone number string is defined by the system administrator in  the  binary  file
   STD:LINES.INI  which relates node name and line number to a phone number string,
   which generally describes the phone number of the terminal line.



   3.1.15  /PTY:oo or /PTY or /NOPTY

   This switch selects pseudo-terminal (PTY) line oo.  OO is an octal  line  number
   from  0  to  the number of legal PTYs minus 1.  If :oo is omitted, all PTY lines
   are selected.  /NOPTY selects lines that arent PTYs (ie TTYs and the CTY).



   3.1.16  /RCVSPEED:n

   This switch selects lines that have a receive speed of n baud.



   3.1.17  /REMOTE AND /NOREMOTE

   This switch selects remote terminals.  Remote terminals implies the "TTY REMOTE"
   setting   rather  than  non-network  terminals.   /NOREMOTE  selects  non-remote
   terminals (eg local terminals).
   LINE MODE                                                               Page 3-4
   SELECTION SWITCHES


   3.1.18  /SLAVE and /NOSLAVE

   This switch selects lines that are  slaved  and  cannot  type  commands  to  the
   monitor.  /NOSLAVE selects lines that are not slaved.



   3.1.19  /SPEED:n

   This switch selects lines whose transmit and receive speed are both equal  to  n
   baud.



   3.1.20  /TSN and /NOTSN

   This switch selects TSN controlled lines.  /NOTSN selects lines that are not TSN
   controlled.



   3.1.21  /TTY:oo or /TTY or /NOTTY

   This switch selects the line (TTY) oo.  OO is an octal  number  from  0  to  the
   number  of legal terminals (including PTYs) minus 1.  If :oo is omitted, all TTY
   lines (but not CTY and PTY lines) are selected.  /NOTTY selects lines that arent
   TTYs (ie PTYs and the CTY).



   3.1.22  /TYPE:ss

   This switch selects lines whose terminal type is ss.  SS is a sixbit  word  with
   optional ?  and * wildcarding.



   3.1.23  /USER and /NOUSER

   This switch selects lines that are controlling a job  (user).   /NOUSER  selects
   lines that are not controlling a job.



   3.1.24  /XMTSPEED:n

   This switch selects lines that have a transmit speed of n baud.
   LINE MODE                                                               Page 3-5
   TYPEOUT SWITCHES


   3.2  TYPEOUT SWITCHES

   The following switches can be included on the command line to control the format
   of  the  line  mode output.  In all cases, these switches are global, and can be
   specified anywhere in the command line and have the same effect.



   3.2.1  /DPY:n:m

   This switch displays the selected lines on a video terminal  in  DPY  mode  with
   cursor  update  of  the  data.  If :n is specified, n is treated as a sleep scan
   between display updates.  The default is 10 seconds.  If :n is 0, DPY mode  will
   not  be  selected.   If  :M is specified, m in the number of times to repeat the
   display.  The default is to repeat forever.  While in DPY  mode,  the  following
   single characters can be typed to control the output on the display:  more



   3.2.2  /ERNONE

   This switch generates a fatal error when no lines match the selection criterion.
   Either   "?WHONTM  Line  not  connected"  or  "?WHOARC  All  lines  rejected  by
   constraints" message is generated as appropriate.  This is the default.



   3.2.3  /FAST

   This  switch  displays  fast  information  about  the  selected   lines.    This
   information is in the format:

   TTY43  WIZARD   1 RDC     A U job 17

   The information displayed is terminal name (TTY43),  node  name  (WIZARD),  line
   number (1), flags (RDC), and job control information (A U job 17).



   3.2.4  /INCLUDE:key

   This switch selects the inclusion of additional information in the  line  format
   display.  The current keys are PTY, to include PTY lines in the display.



   3.2.5  /INCREMENTAL and /NOINCREMENTAL

   This switch selects the display of incremental line information for  the  fields
   that  are  incremental  in  nature.   /NOINCREMENTAL  displays the total fields.
   Fields that are incremental are input character count, output  character  count,
   break  character count, and command count.  If /REPEAT or /DPY are specified, it
   should be noted that the first display will have zeros for all  the  incremental
   fields, as no previous values are available to compute them.
   LINE MODE                                                               Page 3-6
   TYPEOUT SWITCHES


   3.2.6  /INFORMATION:keys

   This switch displays addition information about the selects lines  as  specified
   by the keys.  Typically this information is one or more additional line per key.
   Legal keys are:

           TTY         Display all terminal parameters like INITIA TTY command



   3.2.7  /MAP

   This switch displays the job mode information about the line that was  selected.
   The  job  mode  information  is for the job that that has the terminal assigned,
   inited, or logged in.  If there is no related job, no additional information  is
   printed.



   3.2.8  /NORMAL

   This  switch  displays  normal  information  about  the  selected  lines.   This
   information is in the format:

   TTY43  WIZARD   1 Dataset - 1281     RDC   VT52     600  300  A U job 17

   The information displayed is terminal name (TTY43),  node  name  (WIZARD),  line
   number  (1),  location or phone string descriptor (Dataset - 1281), flags (RDC),
   terminal type (VT52), receive speed (600), transmit speed (300), and job control
   information (A U job 17).



   3.2.9  /OKNONE

   This switch requests that  no  message  be  printed  when  no  lines  match  the
   selection  criterion.   The default is /ERNONE which will generate a fatal error
   when no lines match the selection criterion.



   3.2.10  /PERFORMANCE and /NOPERFORMANCE

   This switch displays performance ratios with various fields related to the line.
   The current ratios are:

           O/I         Output to input character count ratio
           ICC/E       Input characters typed per elapsed second
           OCC/E       Output characters displayed per elapsed second
           BRK/EM      Break characters typed per elapsed minute
           CMD/EM      Commands typed per elapsed minute

   If /INCREMENTAL is  also  specified,  the  performance  statistics  reflect  the
   previous incremental interval only, rather than since the line has connected.
   LINE MODE                                                               Page 3-7
   TYPEOUT SWITCHES


   3.2.11  /PRINT and /NOPRINT

   This switch controls the output of the line line when used in  conjunction  with
   the  /MAP  or  /SUMMARY switch.  If /MAP and /PRINT (default) is given, both the
   line and job mode information is printed, and if /NOPRINT is given, only the job
   mode  information  is  printed.   If  /SUMMARY and /PRINT is given, the selected
   lines will be output, as well as  the  summary  at  the  end,  and  if  /NOPRINT
   (default) is given, only the summary information will be displayed.



   3.2.12  /REPEAT:N:M

   This switch repeats the display of the  selected  lines  at  the  selected  time
   interval.   If  :n  is  specified,  n is treated as a sleep scan between display
   updates.  The default is 10 seconds.  If :n  is  0,  repeat  mode  will  not  be
   selected.   If  :M is specified, m in the number of times to repeat the display.
   The default is to repeat forever.



   3.2.13  /SLOW

   This  switch  displays  slow  information  about  the  selected   lines.    This
   information is in the format:

   TTY43  WIZARD   1 Dataset - 1281     RDC   VT52     600  300  A U job 17
        ICC:44234  OCC:737227  BRK:4166  CMD:1211

   The information displayed is terminal name (TTY43),  node  name  (WIZARD),  line
   number  (1),  location or phone string descriptor (Dataset - 1281), flags (RDC),
   terminal type (VT52), receive speed (600), transmit  speed  (300),  job  control
   information  (A  U  job  17),  count  of  characters input (ICC:44234), count of
   characters output (OCC:737227), break characters typed (BRK:4166), and count  of
   commands typed (CMD:1211).



   3.2.14  /SORT:key:x:n or /SORT:key

   This switch displays lines in sorted order as specified by the switch arguments.
   KEY  is  the field to sort on.  If :x is specified, x can be either ASCENDING or
   DESCENDING to control the sort, and if :n is present, only the  first  (last)  N
   lines will be output.  The legal sort keys are:

           APC         Sort by asynchronous port characteristics
           ASSIGN      Sort by assigned flag (no/yes)
           BREAK       Sort by break character count
           CARRIER     Sort by carrier flag (no/yes)
           COMMANDS    Sort by commands typed
           DIALUP      Sort by dialup flag (no/yes)
           INITED      Sort by inited flag (no/yes)
           INPUT       Sort by input character count
           JOB         Sort by job using line
   LINE MODE                                                               Page 3-8
   TYPEOUT SWITCHES


           LINE        Sort by line
           NODE        Sort by node name
           NODENAME    Sort by node name
           NODENUMBER  Sort by node number
           OUTPUT      Sort by output character count
           RCVSPEED    Sort by receive speed
           REMOTE      Sort by remote flag (no/yes)
           SLAVE       Sort by slave flag (no/yes)
           TYPE        Sort by terminal type
           USER        Sort by user flag (no/yes)
           XMTSPEED    Sort by terminal transmit speed

   If /INCREMENTAL is also specified, and the key  is  an  incremental  field,  the
   sorted order will reflect the intervals incremental values.



   3.2.15  /STAMP and /NOSTAMP

   This switch displays a date/time stamp at the top of the display of the selected
   lines.



   3.2.16  /SUMMARY:key

   This switch displays a summary of lines by  the  selected  key.   The  specified
   field  and  the  number  of lines matching that field is displayed, one line for
   each different value of the field.  If the field can be a large  numeric  value,
   it is rounded off, and grouped into various buckets and displayed.

           APC         Summarize by asynchronous port characteristics
           ASSIGN      Summarize by assigned flag (no/yes)
           BREAK       Summarize by break character count
           CARRIER     Summarize by carrier flag (no/yes)
           COMMANDS    Summarize by commands typed
           DIALUP      Summarize by dialup flag (no/yes)
           INITED      Summarize by inited flag (no/yes)
           INPUT       Summarize by input character count
           JOB         Summarize by job using line
           LINE        Summarize by line
           NODE        Summarize by node name
           NODENAME    Summarize by node name
           NODENUMBER  Summarize by node number
           OUTPUT      Summarize by output character count
           RCVSPEED    Summarize by receive speed
           REMOTE      Summarize by remote flag (no/yes)
           SLAVE       Summarize by slave flag (no/yes)
           TYPE        Summarize by terminal type
           USER        Summarize by user flag (no/yes)
           XMTSPEED    Summarize by terminal transmit speed

   If /INCREMENTAL is also specified, and the key  is  an  incremental  field,  the
   summary display order will reflect the intervals incremental values.
   LINE MODE                                                               Page 3-9
   TYPEOUT SWITCHES


   3.2.17  /TOTALS and /NOTOTALS

   This switch selects whether or not a total line will be  generated.   The  total
   line  is  of  the  format "Total of n lines" where n is the number of lines that
   match the selection criterion.



   3.2.18  /VFAST

   This switch displays very fast  information  about  the  selected  lines.   This
   information is in the format:
   TTY43  WIZARD   1
   The information displayed is terminal name (TTY43), node name (WIZARD), and line
   number (1).











                                      CHAPTER 4

                                FORMATTING THE DISPLAY



   WHO provides the sophisticated used with complete control of the output display.
   The exact formats of the display line, as well as optional headings and footings
   can be specified.



   4.1  FORMAT LIST

   A number of format control switches take a  "format-list"  as  an  argument.   A
   "format-list"  is  a  list  of  parameters  separated  by commas and inclosed in
   parentheses.  Each parameter is either  a  text  string  or  a  switch  specific
   keyword.   Text  string  parameters  are simply ascii strings enclosed in double
   quotations (").  Keywords must be from  the  legal  set  of  keywords,  and  can
   include several arguments of the form keyword:arg1:arg2:arg3.  All arguments are
   optional, and can be omitted.   ARG1  is  the  default  fieldwidth  of  for  the
   specified keyword.  ARG2 is a keyword to control the justification of the field.
   It can be either LEFT (for left justification in  the  specified  field  width),
   CENTER  (for  centering  in  the  specified  field  width), or RRIGHT (for right
   justification in the specified field width).  ARG3 is the number  of  spaces  to
   follow  the  field (only valid when the fieldwidth is zero).  If any argument is
   omitted, a default depending on the nature of the keyword field destined  to  be
   output is used.



   4.2  FORMAT LIST SWITCHES

   The following switches take a format-list an an argument.  For  a  list  of  the
   keywords  that  each  format-list  can  be  composed  of, refer to the following
   section.



   4.2.1  /FINAL:(format-list)

   This format switch provides a format-controlled line to be output  once  at  the
   end  of  all  selected  jobs  or  lines.   It  is  useful  for including trailer
   information.   For  example,   [10,]/FINAL:list1,/PROGRAM:WHO   (equivalent   to
   [10,],/PROGRAM:WHO/FINAL:list1  since  FINAL  is  a  global switch) would output
   format-list 1 after listing all project 10 jobs, and all  jobs  running  program
   FORMATTING THE DISPLAY                                                  Page 4-2
   FORMAT LIST SWITCHES


   WHO.



   4.2.2  /FOOTING:(format-list)

   This format switch provides a format-controlled line to be output at the end  of
   each  list  of  job/line  specifications, and thus, is a "file" specific switch.
   For   example,   [10,]/FOOTING:list1,/PROGRAM:WHO/FOOTING:list2   would   output
   format-list 1 after listing all project 10 jobs, and format list 2 after listing
   all jobs running program WHO.



   4.2.3  /HEADING:(format-list)

   This format switch provides a format-controlled line to be  output  before  each
   list  of  job/line  specifications,  and thus, si also a "file" specific switch.
   For   example,   [10,]/HEADING:list1,/PROGRAM:WHO/HEADING:list2   would   output
   format-list  1  before  listing  all  project  10 jobs, and format list 2 before
   listings all jobs running program WHO.



   4.2.4  /INITIAL:(format-list)

   This format switch provides a format-controlled line to be  output  once  before
   the start of all the selected jobs or lines.  It is useful for including titles,
   or other information.  For example, [10,]/INITIAL:list1,/PROGRAM:WHO (equivalent
   to  [10,],/PROGRAM:WHO/INITIAL:list1  since  INITIAL  is  a global switch) would
   output format-list 1 before listing all project 10 jobs, and  all  jobs  running
   program WHO.



   4.2.5  /FORMAT:(format-list)

   This format switch controls the detailed listing for each job.  It is  a  global
   switch,  and  can  be  used  to taylor the output to display exactly the desired
   fields for each job.  The switches  /VFAST,  /FAST,  /NORMAL  and  /SLOW  select
   several common detail line formats.



   4.3  DEFAULT FORMAT CONTROL

   The following switches can be used to control the default global justifications.
   However,  any  specified as ARG2 to any of the above switches, will override the
   defaults.
   FORMATTING THE DISPLAY                                                  Page 4-3
   DEFAULT FORMAT CONTROL


   4.3.1  /BLANK

   This default format control switch suppresses  the  output  of  any  field  that
   normally would be blank.  Thus, this can destroy the neat, columnized output.



   4.3.2  /DEFAULT

   This default format control switch selects that  the  default  justification  be
   used for each field.



   4.3.3  /FIX

   This default format control switch forces all fields to  be  output  in  strict,
   fixed length columnized areas.



   4.3.4  /FLOAT

   This default format control switch allows all fields to be output in  completely
   free  floating format.  Generally, by default, each field will be separated from
   the previous field by exactly one space.











                                      CHAPTER 5

                                   ACTION SWITCHES



   The following action switches may be used to force various actions on the target
   job  or  line.   Some  switches require a target job, and use the job (if in JOB
   mode), or the job owning the terminal (if in LINE mode), others require a target
   line,  and use the line number of the selected job (if in JOB mode), or the line
   number (if in LINE mode).

   All of these functions can be done to any job with the same programmer number as
   the  commanding  job,  or  to  any terminal owned by the commanding job.  If the
   target job/line does not meet one of those criterion, POKE or  WHEEL  privileges
   are required.

   In all cases except for /NETWORK:CONNECT  the  action  is  preformed  after  the
   jobs/lines  are  selected,  and  the  information  displayed.   In  the  case of
   /NETWORK:CONNECT, the lines are selected, and information  displayed  after  the
   lines are connected.



   5.1  INPUT/OUTPUT FUNCTIONS

   5.1.1  /FORCE:command

   This switch uses the FRCUUO monitor call to force  a  command  on  the  selected
   jobs.   If  the  job  is detached, the switch is ignored.  Legal forced commands
   are:

           .HALT       Force a ^C (stop the stop with control-C trapping)
           .BYE        Detach the job
           .HELLO      Run the INITIA program
           .RESTA      Type the system restart greeting
           KJOB        Log the job out
           INITIA      Run the INITIA program
           .FCONT      Force a CONTINUE
           .TYPE       Retype the line (control-R)
           USESTA      Type statistics (control-T)
           .NETLDR     Force run the NETLDR program
           HALT        HALT the job regardless of control-C trapping
           CTEST       Force a CTEST command (for patching)
   ACTION SWITCHES                                                         Page 5-2
   INPUT/OUTPUT FUNCTIONS


   5.1.2  /INPUT:"string"

   This switch inputs the "string" into the terminal buffer, as though it was typed
   on  the  terminal.   Control  characters  can  be  imbedded by inserting them in
   up-arrow form.



   5.1.3  /OUTPUT:"string"

   This switch outputs the "string" on the terminal.   Control  characters  can  be
   imbedded by inserting them in up-arrow form.



   5.1.4  /SEND:"string"

   This switch outputs the "string" on the terminal,  prefixed  with  the  standard
   "<bell>;;TTYnnn - " leader.



   5.2  NETWORK FUNCTIONS

   5.2.1  /NETWORK:CONNECT

   This switch connects all the specified terminals to the host system.  The  /NODE
   switch  must  be  given,  and the node name cannot be wildcarded.  If a specific
   line is given (/NODE:name_line) only that terminal is connected, if no  line  is
   given (/NODE:name) all terminals on that node will be connected.



   5.2.2  /NETWORK:DISCONNECT

   This switch sends a disconnect message  to  the  node  to  which  each  selected
   terminal is connected to.  If a job is on the line, it is detached.



   5.3  SETUUO FUNCTIONS

   The following arguments can  be  specified  to  the  /SETUUO  switch.   Multiple
   /SETUUO  switches  with  different arguments can be specified.  Each argument to
   the  /SETUUO  switch  is  a  keyword  followed  by  another  argument  (such  as
   /SETUUO:DSKFUL:PAUSE to set disk-full pause for the job).
   ACTION SWITCHES                                                         Page 5-3
   SETUUO FUNCTIONS


   5.3.1  CPU:n

   This argument sets the CPU runability for the selected jobs to CPU n.  (.SET RUN
   CPUn ONLY)



   5.3.2  DEFAULT:BUFFERS:n

   This argument sets the default number of disk buffers for the  job  to  N  (.SET
   DEFAULT BUFFERS n).



   5.3.3  DEFAULT:PROTECTION:n

   This argument sets the default file protection for the selected jobs to n.  N is
   an octal number between 0 and 777.  (.SET DEFAULT PROTECTION n)



   5.3.4  DEFER:key

   This argument sets or clears defered spooling for the selected jobs.  Key may be
   either YES to set defered spooling (.SET DEFER), or NO to clear defered spooling
   (.SET NODEFER).



   5.3.5  DSKFUL:key

   This argument sets or clears the disk-full action for the  selected  jobs.   Key
   may  be  either PAUSE to enable disk-full pause (.SET DSKFUL PAUSE), or ERROR to
   disable disk-full pause (.SET DSKFUL ERROR).



   5.3.6  LIMIT:hh:mm:ss

   This argument sets the batch time limit for the selected jobs to hh:mm:ss.



   5.3.7  PHYSICAL:key:n

   This argument sets the physical core parameter to n pages for the selected jobs.
   Key  may  be  either  LIMIT  to  set  physical limit (.SET PHYSICAL LIMIT n), or
   GUIDELINE to set physical guideline (.SET PHYSICAL GUIDELINE n).
   ACTION SWITCHES                                                         Page 5-4
   SETUUO FUNCTIONS


   5.3.8  TIME:hh:mm:ss

   This argument sets the batch time limit for the selected jobs to hh:mm:ss.



   5.3.9  VIRTUAL:n

   This argument sets the virtual core limit to n  pages  for  the  selected  jobs.
   (.SET VIRTUAL n)



   5.3.10  WATCH:(keys)

   This argument sets watch parameters for the selected jobs.  Any of the  keywords
   to  the  monitor  .SET  WATCH  command  may  be specified.  Multiple keys can be
   specified, inclosed in parentheses, and separated by commas.











                                      CHAPTER 6

                                 OUTPUT FILE CONTROL



   6.1  FILE SPECIFICATION DEFAULTS

   The default output specification is TTY:WHO.LST.  However, if any part of a file
   specification is typed, the defaults are filled in from DSK:WHO.LST[-].



   6.2  SWITCHES

   The following switches may be placed on the output file specification to control
   it.



   6.2.1  /APPEND and /NOAPPEND

   This switch controls whether or not the output file is appended to.  The default
   (/NOAPPEND) is to supersede the output file for the first command, and append to
   it each time if /REPEAT is specified.  /APPEND will always append to the  output
   file.



   6.2.2  /ERSUPERSEDE

   This switch will cause a fatal error to be generated if the output file  exists,
   and would be superseded.  The default is not to generate an error, and supersede
   the file.



   6.2.3  /OKSUPERSEDE

   This switch allows the output file to be superseded, if it exists.  This also is
   the default action.
   OUTPUT FILE CONTROL                                                     Page 6-2
   SWITCHES


   6.2.4  /PROTECTION:n

   This switch sets the output file protection to n.  N is an octal number  between
   1 and 777.  A value of 0 uses the system default.



   6.2.5  /VERSION:x

   This switch sets the  output  file  version.   X  is  a  standard  version  word
   consisting  of  major minor(edit)-who.  The default is to use the version of the
   program.











                                      APPENDIX A

                                   JOB STATE CODES



   The following wait state codes may be output  for  the  jobs  wait  state.   The
   format  of  the  output  is  XXYY  where XX is the one of the wait states listed
   below, XX indicates the job is currently running on a CPU, YY  is  the  swapping
   state (SW=swapped out, SF=swapped out and fragmented, LK=locked in core), and YY
   indicates the job is actively  being  swapped.   A  list  of  wait  state  codes
   follows:

   State   Explanation

   AU      Alter disk UFD queue
   B1      Running background batch in PQ1
   B2      Running background batch in PQ2
   CA      Semi-permanent core allocation wait
   CB      Disk core-block scan wait
   D1      Dectape control wait (up to 8 drives)
   D2      Second DECtape controler wait
   DA      Disk storage allocation wait
   DC      Data control (DC) wait - magtape and dectape
   DI      Disk input wait
   DO      Disk output wait
   DS      Disk I/O wait satisfied
   DW      Disk I/O wait
   E6      Event wait (DN60)
   EF      Event wait (front ends)
   EI      Event wait (IPCF)
   EK      Event wait (tape kontroller)
   EL      Event wait (tape labeling)
   EN      Event wait (networks)
   EQ      ENQ/DEQ wait
   ER      Event wait (tape rewinding)
   ES      Event wait satisfied
   EV      Exec virtual memory wait
   EW      General event wait
   EW      Job in event wait
   GU      GETSEG UUO in progress
   HB      Hibernate (no sleep time)
   HS      Hibernate with sleep time
   Hd      Running in HPQ d
   IO      IO wait
   JD      Waiting for DAEMON to be run
   JOB STATE CODES                                                         Page A-2



   LK      Locked in core
   MM      Memory management wait
   NA      Job napping (.lt.  1 sec sleep)
   NU      Job number not assigned
   OW      Operator wait
   PI      Paging I/O wait
   PS      Paging I/O wait satisfied
   R1      Running in PQ1
   R2      Running in PQ2
   RN      Running
   RU      Run UUO in progress
   SF      Swapped and fragmented
   SL      Sleeping
   SW      Swapped out
   TI      TTY input wait
   TO      TTY output wait
   TS      TTY I/O wait satisfied
   TW      TTY I/O wait
   WI      General input wait
   WO      General output wait
   WS      I/O wait satisfied
   ^C      Job stopped
   ^D      Job in DAEMON DCORE wait
   ^W      Job in command wait











                                      APPENDIX B

                                 INFORMATION DISPLAYS



   The following is a detailed description of all the output for  the  /INFORMATION
   switch.   For  a description of the switch, refer to "selection switches" in the
   previous sections.



   B.1  ACCOUNT

   This  keyword  displays  the  account  string  for  the  selected  jobs.    This
   information is in the format:

        Account: 6PFS.C684422

   The information displayed is the account string (6PFS.C684422).



   B.2  BATCH

   This keyword displays batch and operator  information  for  the  selected  jobs.
   This information is in the format:

       WTO privs:all  OPR privs:system  Batch stream:no  Limit:0:09:45 Core:511

   The information displayed is the write to operator privileges (all) [can be  one
   of  ALL,  WTO,  NONE], operator privileges (system) [can be one of NONE, REMOTE,
   HOST, SYSTEM], batch stream number (no) [a stream number or "no" if  none  set],
   batch CPU time limit (0:9:45), and batch core limit (511).



   B.3  CAPABILITIES

   This keyword displays the enabled  capabilities  of  the  selected  jobs.   This
   information is in the format:

        Capabilities: 777777,1
         DEC: IPCF DPR:3 METER POKE CPU HPQ:15 USPL ENQ RTTRP LOCK TRPSET SPY MSPY 
         Local: CHGPPN 
   INFORMATION DISPLAYS                                                    Page B-2
   CAPABILITIES


   The information displayed is the octal capability  bits  (left  half=DEC,  right
   half=local)   (777777,1),  and  a  breakdown  of  each  of  the  DEC  and  local
   capabilities by name.



   B.4  CHANNEL

   This keyword displays information about all open channels for the selected jobs.
   This information is in the format:

      2  DSK         14      OO      OB      E       O   IC      

   The information displayed is the channel number (2), device  inited  (DSK),  I/O
   mode  (14)  and  various  channel  status flags from USRJDA (OO OB E O IC).  The
   channel status flags are:

           OI          Opened with input buffer specified
           OO          Opened with output buffer specified
           IB          Input buffers have been setup
           OB          Output buffers have been setup
           L           LOOKUP has been done
           E           ENTER has been done
           I           INPUT has been done
           O           OUTPUT has been done
           IC          Input close has been done (or not needed)
           OC          Output close has been done (or not needed)



   B.5  CORE

   This keyword displays the current and maximum physical and virtual  core  limits
   for the selected jobs.  This information is in the format:

        Core limits:  Current: Virt:200 Phys:120  Maximum: Virt:512 Phys:300

   The information displayed is the  jobs  current  virtual  limit  (200),  current
   physical  limit  (120),  maximum virtual limit (512), and maximum physical limit
   (300), all expressed in pages of core.



   B.6  DDBS

   This keyword displays information about all open devices for the selected  jobs.
   This information is in the format:

   * TTY104  A      node WIZARD(123) line 45                                     R
     LPT773  I      node SOFDCP(77) unit 3                                       W
     MTA710  A   MTA0    reelid:COBOL file 11 record 45                       WE/W
     DSK     I           DSKE0:PROJCT.SYS[10,7,GALAXY,ACT]                 1   U/R
     ACT     I   DEVIN   DSKE0:SYSDEV.BIN[1,7]                                   R
     TSK71   I           I: *::FTSFAL[1,2] P: TWINKY::NETSPL[1,2]                R
   INFORMATION DISPLAYS                                                    Page B-3
   DDBS


   The information displayed is the flag ('=device is  spooled,  *=I/O  active  for
   this  DDB),  the device name the program opened (DEVNAM), the status (A=assigned
   by console command, I=inited by program), and the logical  name  assignment  (if
   any).   The  rest of the information is device specific, and is discussed below.
   The final character is the last I/O direction, which is either R (reading last),
   or W (writing last).



   B.6.1  DSK DDB information

   If the DDB  is  for  a  disk,  the  following  device  specific  information  is
   displayed.   The  logical unit name (if a file is open), the file and extension,
   and the files complete path including five levels of SFD.   Following  the  file
   specification  information,  is  the  current block number to be read or written
   next.  If the file is open, the reader count followed by the access table status
   is  displayed.   The  access  table status is C=file being created, S=file being
   superseded, R=file being read, U=file being updated (single  user),  and  M=file
   being  updated (multi user).  If the file is marked for deletion, the separating
   "/" will turn into a "!".



   B.6.2  MTA DDB information

   If the DDB is for a  magtape,  the  following  device  specific  information  is
   displayed.   The tapes reelid (reelid:COBOL), the current file number (file 11),
   the current record number (record 45) [???   means  the  record  number  is  not
   known], various flags [BOT=tape at beginning of tape, EOT=tape at logical end of
   tape, REW=tape is in the process and being rewound], and the write enable status
   (WE) [WE=tape is write enabled, WL=tape is write locked].



   B.6.3  NET DDB information

   If the DDB is for a network device, with the exception of  TTYs  and  TSKs,  the
   following network device specific information is displayed.  The node name, node
   number, and unit number of the device is output.



   B.6.4  TSK DDB information

   If the DDB  is  for  a  task,  the  following  device  specific  information  is
   displayed.   The  network  process  descriptor (NPD) for both the input (I:) and
   passive (P:) tasks are displayed.  Each NPD includes the node name (*=any  node)
   and the ascii connect string, with \ substituted for nulls.
   INFORMATION DISPLAYS                                                    Page B-4
   DDBS


   B.6.5  TTY DDB information

   If the DDB is for a terminal,  the  following  device  specific  information  is
   displayed.   The  node  name,  node  number,  and line number of the terminal is
   output.



   B.7  DEFAULTS

   This keyword displays the various SET DEFAULT parameters for the selected  jobs.
   This information is in the format:

        Defaults: Buffers:10   Protection:<077>On  Attach:Ask

   The information displayed is the  default  number  of  disk  buffers  (from  SET
   DEFAULT  BUFFER  n  command)  (10),  the  jobs default file protection (from SET
   DEFAULT PROTECTION nnn command) (<077>), if the default file protection  is  set
   (On), and the ATTACH:  status (from LOGIN/ATTACH:[IGNORE,ASK]) (Attach:Ask).



   B.8  IPCF

   This keyword displays IPCF statistics for the selected jobs.   This  information
   is in the format:

     IPCF messages: S:12  R:7  outstanding: S:1  R:0  quotas: S:100 R:50

   The information displayed is the send and receive message counts (messages  S:12
   R:7),  the  outstanding send and receive message counts (outstanding:  S:1 R:0),
   and the send and receive quotas (quotas:  S:100 R:50).



   B.9  JSL

   This keyword displays the job search list and switches for  the  selected  jobs.
   The information displayed is in the format:

        Job search list:  TSG0:/NOWRITE, SOFT:, FENCE, DSKE:/NOCREATE

   The information displayed is the structures in the jobs active  search  list  to
   the  left  of  the  FENCE  (TSG0:,  SOFT:),  the  FENCE  itself (FENCE), and the
   structures in the jobs passive search list to the right of  the  FENCE  (DSKQ:).
   If  applicable,  the  switches  /NOWRITE  (do  not write on this structure), and
   /NOCREATE (do not create on this structure if generic DSK is specified)  may  be
   present.
   INFORMATION DISPLAYS                                                    Page B-5
   LOGICAL


   B.10  LOGICAL

   This keyword displays the pathological names  defined  for  the  selected  jobs.
   This information is in the format:

        Logical name definitions:
         SYS: = DSKQ:[10,3146,SYS],SSL:[1,5],SSL:[1,4]
         LIB:/SEARCH = DSKQ:[10,3146,LIB]
         WSM: = DSKQ:[10,3146]

   The information displayed is the pathological name (SYS:), the search  attribute
   (/SEARCH),  and  the  list of structures and paths that compose the logical name
   (DSKQ:[10,3146,SYS],SSL:[1,5],SSL:[1,4]).



   B.11  MTA

   This keyword displays information about the parameters of any magtapes in use by
   the job.  This keyword also implies DDBS (see above for a description of the DDB
   format).  The information displayed is in the format:

        Density:1600  Track:9  Mode:DEC core dump  Labels:ANSI

   The information displayed is the tape density (1600) [can be one  of  200,  556,
   800, 1600, 6250], the track (9) [can be either 7 or 9], the mode (DEC core dump)
   [can be one of none, DEC core dump, Industry core dump, SIXBIT, ASCII, DEC  core
   dump],  and  the  label type (ANSI) [can be of No MDA, Bypass, ANSI, ANSI(user),
   IBM, IBM(user), leading tape mark, nonstandard, none, COBOL ASCII, COBOL SIXBIT,
   user EOT].



   B.12  ORIGIN

   This keyword displays the program origin and version for both the  high  segment
   and low segment.  The information displayed is in the format:

      Origin: DSKQ:QUASAR[1,4,QSR] 4(761)/1(5) + DSKE:GLXLIB[1,4] 1(763)

   The information displayed is the low segment origin (DSKQ:QUASAR[1,4,QSR]),  the
   low segment Digital version (loc .JBVER==137) [4(761)], the low segment customer
   version (loc .JBCST==136) [1(5)], the high  segment  origin  (DSKE:GLXLIB[1,4]),
   and  the  high  segment  Digital version [1(763)].  If all the attributes of the
   high segment are the same as the low segment, only the low  segment  information
   and  a plus (+) are displayed.  If the program has no high segment, only the low
   segment information excluding the plus is displayed, and if the  program  has  a
   spy  segment, it is indicated by + SPY (117P), where 117P is the highest address
   spied upon.  If DDT and/or  PFH  (page  fault  handler)  are  present,  that  is
   indicated  by  DDT:   12345-45671, or PFH:  776000-777777.  The range of numbers
   indicates the core occupied by DDT or PFH.
   INFORMATION DISPLAYS                                                    Page B-6
   PATH


   B.13  PATH

   This keyword displays information about the jobs default path and path switches.
   The information displayed is in the format:

        Path:  [10,3146,WHO]/SCAN/NEW

   The information displayed is the  default  path  ([10,3146,WHO])  and  any  path
   switches,  such  as  /SCAN (scan higher level SFDs and the UFD), /NOSCAN (do not
   scan higher level SFDs and the UFDs), /NEW (include NEW  when  running  programs
   from SYS), and /SYS (include SYS when running programs from DSK).



   B.14  PRIVILEGES

   This keyword displays the privileges of the selected jobs.  This information  is
   in the format:

        Privileges: 777777,1
         DEC: IPCF DPR:3 METER POKE CPU HPQ:15 USPL ENQ RTTRP LOCK TRPSET SPY MSPY 
         Local: CHGPPN 

   The information displayed is the octal  privilege  bits  (left  half=DEC,  right
   half=local)  (777777,1), and a breakdown of each of the DEC and local privileges
   by name.



   B.15  SIZE

   This keyword displays information about the file size of the  opened  files  for
   the  selected jobs.  This keyword also implies DDBS (see above for a description
   of the DDB format).  The information displayed is in the format:

        Size written: 5 allocated: 30 Created:  3-Mar-81 20:36

   The information displayed for each open file is the written size in blocks (size
   written:   5),  the  allocated size in blocks (allocated:  30), and the creation
   date and time (Created:  3-Mar-81 20:36).



   B.16  SPOOL

   This keyword displays information about the  spooling  status  of  the  selected
   jobs.  The information displayed is in the format:

        Defered spooling: CDR:XYZ, CDP:, LPT: (unspooling allowed)

   The information displayed is the  spooling  mode  ("Defered  spooling"  or  just
   "Spooling"),  the  spooled  devices  (CDR:, CDP:, LPT:), the spooled card reader
   name if CDR:  is spooled (CDR:XYZ), and  the  unspooling  privilege  (unspooling
   allowed) if applicable.
   INFORMATION DISPLAYS                                                    Page B-7
   TIME


   B.17  TIME

   This keyword displays information about the login duration,  and  date/time  and
   the  RESET  UUO  duration  and  date/time.   The information displayed is in the
   format:

        Login for 1:08:29 at Fri 19-Mar-82: 8:25:57
        Reset for 0:04:07 at Fri 19-Mar-82: 9:30:19

   The information displayed is the time since LOGIN (1:08:29) and the date/time of
   LOGIN (Fri 19-Mar-82: 9:30:19) , and the time since last RESET UUO (0:04:07) and
   the date/time of the RESET UUO (Fri 19-Mar-82: 9:30:19) .



   B.18  TMPCOR

   This keyword displays information about the selected  jobs  TMPCOR  file  usage.
   The information displayed is in the format:

        TMPCOR directory:
           SVC    6
           EDS    3
        Total of 9 words in 2 files

   The information displayed is the TMPCOR file name (SVC),  and  the  TMPCOR  file
   size in words (6).  A summary line including the total number of words allocated
   to TMPCOR files, and the total number of files is also displayed.