Google
 

Trailing-Edge - PDP-10 Archives - BB-KL11L-BM_1990 - t20src/msseq.mac
There are 14 other files named msseq.mac in the archive. Click here to see a list.
;This software is furnished under a license and may only be used
;  or copied in accordance with the terms of such license.
;
;Copyright (C) 1979,1980,1981,1982 by Digital Equipment Corporation
;	       1983,1984,1985,1986    Maynard, Massachusetts, USA


	TITLE MSSEQ - Message sequence parsing routines for MS

	SEARCH GLXMAC,MSUNV
	PROLOG (MSSEQ)

	CPYRYT
	MSINIT

;Define globals

	GLOBS			; Storage
	GLOBRS			; Routines

;Global routines defined elsewhere

;MSUTL.MAC
	EXTERNAL CMDER1, RFIELD, MOVST0, SSEARC, SETSFL, REMAP, GTBFL

;Global data items defined elsewhere

;MSUTL.MAC
	EXTERNAL ATMBUF, MSGFAD, WBOT, WTOP, CMDRES, MSGSSQ, MSGSQE

;Local storage

	IMPUR0

MSGSEQ:	EXP 0			; Table of numbers of messages adress
LSTMSG:	BLOCK 1			; Saved last message for typing out seq
SAVEM:	BLOCK 1			; Saved current message number
COMPDT:	BLOCK 1			; Date/time for "since" and "before"
NXTMSG:	BLOCK 1			; Dispatch to fetch next message
PATSTR:	BLOCK 40		; String pattern for from/subj matching
ANDFLG:	BLOCK 1			; Qualifiers being ANDed
PRIORM:	BLOCK 1
RECLVL:	EXP 0
MSGQLN:	BLOCK 1
HEADNR:	BLOCK 1
	PURE
 SUBTTL Message sequence subroutines

; Get sequence

DFSQNW:	MOVEI A,DEFNEW		; Default to new (unseen)
	JRST GETSEQ

DFSQTH:	MOVEI A,DEFCUR		; Default to current message
GETSEQ:	PUSH P,A		; Save command block addrs
	SETZM LCNT		; Say no matches seen yet
	SKIPG MSGJFN		; Have a message file?
	 CWARN (No current mail file)
	NOISE (messages)
	MOVEI A,MSGSSQ
	SKIPN MSGSEQ
	MOVEM A,MSGSEQ		;SET UP ADRESS IF NECESSARY
	MOVE L,MSGSEQ
	ADD L,[POINT 18,0]
	SETOB X,LSTMSG
	POP P,A			; Restore command block
	CALL RFIELD		; Get command field
	MOVE A,CR.COD(A)	; Get code
	CAIN A,.CMKEY		; Keyword?
	JRST GETSQK		; Yes - done
	CAIN A,.CMNUM		; Number?
	JRST GETSQN		; Yes - proceed
	JRST GETSQT		; Must be token (% or .)

;Keyword seen , handle defaulting and return

GETSQK:	HRRZ A,(B)		; Get routine addrs
	JRST (A)


;Token - check for % or . and supply number

GETSQT:	LDB A,[POINT 7,ATMBUF,6]	; Get token character
	CAIN A,"%"
	SKIPA B,LASTM		; % = last message number
	MOVEI B,(M)		; . = current message number
	AOJA B,GETSQN		; Handle as number now
;Number parsed - handle n:m n,m or n alone

GETSQN:	JUMPE B,GTSQNE		; Range error
	SOJL B,GTSQNE
	CAMLE B,LASTM
	 JRST GTSQNE
	JUMPGE X,GTSQN2		; 2nd in series n:m
	IDPB B,L		; Save number in list
	CALL CHKL		;CHECK THE RANGE
	MOVEI A,GTNBK1		; Now try for <cr> ! , ! :
GTSQNA:	CALL RFIELD
	MOVE A,CR.COD(A)	; Get function code parsed
	CAIN A,.CMCFM		; EOL?
	JRST GTSQNR		; Yes - done
	CAIE A,.CMCMA		; Comma?
	LDB X,L			; Must be ":" ,setup for 2nd arg
	MOVEI A,DEFLST		; Yes - try for <number> ! . ! %
	CALL RFIELD
	MOVE A,CR.COD(A)	; Get function code
	CAIN A,.CMCFM		; EOL?
	JRST GTSQNR		; Yes - done
	CAIN A,.CMNUM		; Number?
	JRST GETSQN		; Yes - handle
	CAIN A,.CMKEY		; Keyword?
	JRST GETSQK		; Yep, go handle it
	JRST GETSQT		; Handle token


;2nd in range seen - fill list

GTSQN2:	CAIN X,(B)		; Done with range
	JRST GTSQNC		; Look for next field
	CAIG X,(B)		; If going forwards,
	 AOSA X			;   increment,
	SOS X			;  else decrement
 	IDPB X,L		; Save in table
	CALL CHKL		;CHECK THE RANGE
	JRST GTSQN2		; Loop till done
GTSQNC:	SETO X,			; Say looking for 1st number of pair
	MOVEI A,GTNBK3		; Try for <cr> ! ,
	JRST GTSQNA


;EOL seen , wrapup numbers

GTSQNR:	MOVEI B,777777		; Mark end of list
	IDPB B,L
	MOVEI A,NXTSEQ		; Next in the sequence
	MOVEM A,NXTMSG		; Setup as dispatch
	MOVE A,MSGSEQ
	ADD A,[POINT 18,0]
	EXCH A,L		; Reset L, get old contents
	MOVE B,MSGSEQ
 	ADD B,[POINT 18,0,17]
	CAMN A,B		;ANY MESSAGES AT THE LISTAT ALL ?
	RET			; No -- leave M alone then
	PUSH P,L		; Save these for a bit
	PUSH P,M
	SETZM LCNT		; Zero msg count
GTSQN3: ILDB M,L		; Check to see all msgs are parsed
	CAIN M,777777		; End of list?
	JRST GTSQN4		; Yes, all done
	AOS LCNT		; Count messages in this sequence
	GTMBL (M,B)  		; Get ptr to message block
	MOVX A,M%VALI		; Valid info for this message?
	TDNN A,MSGBTS(B)	;  ..
	CALL PRSMS0		; No, get some then
	JRST GTSQN3		; Check all msgs in sequence
GTSQN4:	POP P,M
	POP P,L			; Finish up
	RET			; Return

GTSQNE:	CMERR (Invalid message number)
	JRST CMDER1


DEFCUR:	FLDDB1 (.CMNUM,CM%SDH,^D10,<-1,,SEQHLP>,<current>,DEFDEF)
DEFNEW:	FLDDB1 (.CMNUM,CM%SDH,^D10,<-1,,SEQHLP>,<new>,DEFDEF)
DEFALL:	FLDDB1 (.CMNUM,CM%SDH,^D10,<-1,,SEQHLP>,<all>,DEFDEF)
DEFLST:	FLDDB1 (.CMNUM,CM%SDH,^D10,<-1,,SEQHLP>,<last>,DEFDEF)

DEFDEF:	FLDDB1 (.CMTOK,,<POINT 7,[ASCII "%"]>,,,TKNDOT)
TKNDOT: FLDDB1 (.CMTOK,,<POINT 7,[ASCII "."]>,,,[FLDDB1 (.CMKEY,,SQCMTB)])

GTNBK1:	FLDDB1 (.CMCFM,,,,,[FLDDB1 (.CMCMA,,,,,[FLDDB1 (.CMTOK,,<POINT 7,[ASCII ":"]>)])])

GTNBK3:	FLDDB1 (.CMCFM,,,,,[FLDDB1 (.CMCMA)])

SEQHLP:	ASCIZ \message sequence, one of the following:
     message number
  or list of numbers (4,14,11,...)
  or range of numbers (11:37)\
SQCMTB:	NSQCMS,,NSQCMS
	CMD1 (A,ENTALL,CM%INV!CM%ABR)
ENTALL:	CMD1 (All,STQALL)
	CMD1 (Answered,STQANS)
	CMD1 (Before,STQTMB)
	CMD1 (Current,STQCUR)
	CMD1 (Deleted,STQDEL)
	CMD1 (F,ENTFRM,CM%INV!CM%ABR)
	CMD1 (First,STQFRS)
	CMD1 (Flagged,STQFLG)
ENTFRM:	CMD1 (From,STQFRM)
	CMD1 (Inverse,STQREV)
	CMD1 (Keyword,STQKWD)
	CMD1 (L,ENTLST,CM%INV!CM%ABR)
	CMD1 (Larger,STQLRG)
ENTLST:	CMD1 (Last,STQLST)
	CMD1 (N,ENTNEW,CM%INV!CM%ABR)
ENTNEW:	CMD1 (New,STQNEW)
	CMD1 (Next,STQNXT)
	CMD1 (Old,STQOLD)
	CMD1 (Related-to,STQREL)
	CMD1 (Same,STQSAM)
	CMD1 (Since,STQTMS)
	CMD1 (Smaller,STQSML)
	CMD1 (Sorted,STQSOR)
	CMD1 (Subject,STQSBJ)
	CMD1 (To,STQTO)
	CMD1 (Unanswered,STQUNA)
	CMD1 (Undeleted,STQUND)
	CMD1 (Unflagged,STQUNF)
NSQCMS==.-SQCMTB-1

STQSRC:	STQSRN,,STQSRN
	CMD1 (Date-time,SQSRDT)
STQSRN==.-STQSRC-1
STQSAM:	NOISE (as last sequence)
	CONFRM
	MOVE C,MSGSEQ
	HRLI C,(POINT 18)
	MOVE L,C		;RETURN THIS IN L
	SETZ D,
STQSA0: ILDB A,C		; Get msg number
	CAIE A,777777		; Check for terminator
	AOJA D,STQSA0
STQSA1:	MOVEM D,LCNT		; Save count
	CAIG D,0		; If none...
	WARN <No previous sequence exists> ;Complain here
	RET

;Larger (than) n (characters)

STQLRG:	CALL STQLR0		; Parse character count
STQLR1:	GTMBL (M,A)  		; Get ptr to message block
	CAMGE B,MSGBON(A)	; Is this one big enough?
	IDPB M,L		; Yes, add to sequence
	CALL CHKL		;CHECK THE RANGE
	CAME M,LASTM		; Loop through all messages
	AOJA M,STQLR1		;  ..
	JRST GTSQNR		; Finished


;Smaller (than) n (characters)

STQSML:	CALL STQLR0		; Parse character count
STQSM1:	GTMBL (M,A)  		; Get ptr to message block
	CAMLE B,MSGBON(A)	; Match?
	IDPB M,L		; Yes, stuff into sequence
	CALL CHKL		;CHECK THE RANGE
	CAME M,LASTM		; Loop over all msgs
	AOJA M,STQSM1		;  ..
	JRST GTSQNR		; Done


STQLR0:	NOISE (than)
	MOVEI A,[FLDDB. (.CMNUM,CM%SDH,^D10,<character count>)]
	CALL RFIELD
	SETZ M,			; Init message pointer
	PUSH P,B		; Save size limit
	NOISE (characters)
	CONFRM
	POP P,B			; Restore size limit
	RET


STQSOR:	NOISE (by)
	MOVEI A,[FLDDB. (.CMKEY,,STQSRC,,<Date-time>)]
	CALL RFIELD
	HRRZ A,(B)		; Dispatch to sort routine
	CALLRET (A)
;Sort by date/time

SQSRDT:	TRVAR <LOW,LOWM>	; Low date/time, and its M
	CONFRM
	SETZ M,
SQSRD0:	GTMBL (M,B)  		; Get ptr to message block
	MOVX A,M%TEMP		; Temporary marker bit
	ANDCAM A,MSGBTS(B)	; Clear markers
	MOVX A,M%VALI		; Parsed this one yet?
	TDNN A,MSGBTS(B)	;  ..
	CALL PRSMS0		; No, insure it has a date/time
	CAME M,LASTM		;  for all messagges
	AOJA M,SQSRD0
	SETOM LOWM		; Flag nothing found yet
	MOVE A,[377777,,777777]	; Get largest integer
	MOVEM A,LOW		; Init floor counter
	SETZ M,
SQSRD1:	GTMBL (M,B)  		; Get ptr to message block
	MOVX A,M%TEMP		; Skip this message
	TDNE A,MSGBTS(B)	;  if already done
	JRST SQSRD2		;  ..
	MOVE A,MSGDAT(B)	; Get this msgs date
	CAMGE A,LOW		; Is this lowest yet?
	JRST [	MOVEM M,LOWM		; Yes, remember it
		MOVEM A,LOW		;  and its date/time
		JRST .+1]
SQSRD2:	CAME M,LASTM		; Check all msgs
	AOJA M,SQSRD1		;  ..
	SKIPGE M,LOWM		; Did we find one?
	JRST GTSQNR		; No, all done then - tie off sequence
	IDPB M,L		; Yes, stuff into sequence
	CALL CHKL		;CHECK THE RANGE
	GTMBL (M,B)  		; Get ptr to message block
	MOVX A,M%TEMP		; Mark this one as gotten
	IORM A,MSGBTS(B)	;  ..
	SETZ M,			; Begin scan again
	SETOM LOWM		; Flag nothing found this scan yet
	MOVE A,[377777,,777777]	; Init ceiling again
	MOVEM A,LOW		;  ..
	JRST SQSRD1		;  ..
STQALL:	SKIPA A,[NXTALL]
STQDEL:	 MOVEI A,NXTDEL
STQDL0:	MOVEM A,NXTMSG
	CONFRM			; Get confirmation
	MOVEM M,SAVEM		; Save current in case none in list
STQDL2:	SETO M,
STQDL1:	CALL @NXTMSG		; Get next in sequence
	 JRST GTSQNR		; No more, finish up
 	IDPB M,L		; Save this one in list
	CALL CHKL		;CHECK THE RANGE
	JRST STQDL1		; Go for more

STQFLG:	SKIPA A,[NXTFLG]
STQUND:	 MOVEI A,NXTUND
	 JRST STQDL0

STQNEW:	SKIPA A,[NXTNEW]
STQOLD:	 MOVEI A,NXTOLD
	JRST STQDL0

;Related-to (messages)

STQREL:	CALL DFSQTH		; Get sequence, default to current
	PUSH P,[-1]		; Put a marker on the stack
STQRL0:	CALL NXTSEQ		; Get next message from sequence of originals
	 JRST STQRL1		; None left
	PUSH P,M		; Push this message number
	JRST STQRL0		; Push all message numbers from original seq.
STQRL1:	MOVE L,MSGSEQ
	ADD L,[POINT 18,0]	;RESET SEQUENCE POINTER
STQRL2:	POP P,M			; Get a message from the original sequence
	CAMN M,[-1]		; Hit the marker (end of stack) yet?
	JRST GTSQNR		; Yes, done then, tie off sequence and return
	MOVEM M,HEADNR		;SAVE HEAD NUMBER
	CALL RELSEQ		; No, add msgs related to this one to sequence
	 JFCL			; Don't care if none found
	JRST STQRL2		; Repeat for all msgs in original sequence
STQLST:	CALL STQLSS		; Get number of messages to put into list
	 JRST GTSQNE		; Range error
	MOVE C,LASTM		; Number of last message
	JUMPL X,STQLS2		; If no previous no. with colon, this is easy
	MOVE B,C		; There was one, set up to count from there
	JRST GTSQN2		; Go count from number to end
STQLS2: IDPB C,L		; Stuff message numbers
	CALL CHKL		;CHECK THE RANGE
	SUBI C,1		; Next message from end
	SOJG A,STQLS2		; Do for all in list
	CONFRM
	JRST GTSQNR		; Done with list

STQNXT:	CALL	STQLSS
	 JRST	GTSQNE
	JUMPGE	X,RANNXT
	MOVE	C,M		;START FROM WHERE WE WERE
	CAML	C,LASTM		;MAKE SURE NOT AT END
	JRST	GTSQNE		;GO COMPLAIN
STQNX2:	ADDI	C,1		;+1
	IDPB	C,L
	CALL	CHKL
	CAMGE	C,LASTM		;AT END? QUIT NICELY
	SOJG	A,STQNX2	;CAN STILL GO ON
	JRST	GTSQNC		;GO PARSE MORE
RANNXT:	MOVE	B,X		;Start from beginning of range
	ADD	B,A		;up by arg to NEXT
	CAMLE	B,LASTM
	MOVE	B,LASTM		;MAX fo LASTM
	JRST	GTSQN2		;GO FILL RANGE


STQFRS:	CALL STQLSS		; Similarly, first n messages
	 JRST GTSQNE		;  ..
	SETZ C,			;  ..
STQFR2: IDPB C,L		;  ..
	CALL CHKL		;CHECK THE RANGE
	ADDI C,1		;  ..
	SOJG A,STQFR2		;  ..
	CONFRM
	JRST GTSQNR		;  ..

STQLSS:	MOVEI A,[FLDDB. (.CMNUM,,^D10,,<1>)]
	CALL RFIELD
	PUSH P,B		; NOISEs clobber this
	CAIE B,1		; Singular?
	JRST STQLS0		; No, use plural
	NOISE (message)
	JRST STQLS1
STQLS0:	NOISE (messages)
STQLS1:	POP P,A			; Restore number typed
	JUMPLE A,R		; Range check
	SUBI A,1		; LASTM is counted from zero
	CAMLE A,LASTM		;  ..
	RET			;  ..
	ADDI A,1		; recorrect A
	RETSKP			; Good return


STQCUR:	MOVEI B,(M)		; Default to current
	IDPB B,L		; Save on list
	CALL CHKL		;CHECK THE RANGE
	CONFRM			; Grntee EOL
	JRST GTSQNR		; Done with list

STQUNF:	SKIPA A,[NXTUNF]
STQREV:	MOVEI A,NXTREV		; Reverse order
	JRST STQDL0

STQANS:	SKIPA A,[NXTANS]	; Answered
STQUNA:	MOVEI A,NXTUNA		; Unanswered
	JRST STQDL0
STQFRM:	MOVEI X,NXTFRM		; Match "from" string
	MOVEI A,[FLDDB. (.CMCFM,CM%SDH,,,,[FLDDB. (.CMQST,,,<string to find in "From" field,
 >,,[FLDDB. (.CMTXT)])])]
	JRST STQSB0		; Common routine to get pattern

STQTO:	MOVEI X,NXTTO		; Find "to" string
	MOVEI A,[FLDDB. (.CMCFM,CM%SDH,,,,[FLDDB. (.CMQST,,,<string to find in "To" field,
 >,,[FLDDB. (.CMTXT)])])]
	JRST STQSB0

STQKWD:	MOVEI X,NXTKWD		; Match keyword in header or text
	MOVEI A,[FLDDB. (.CMCFM,CM%SDH,,,,[FLDDB. (.CMQST,,,<string to find anywhere in message,
 >,,[FLDDB. (.CMTXT)])])]
	JRST STQSB0

STQSBJ:	MOVEI X,NXTSBJ		; Match subject string
	MOVEI A,[FLDDB. (.CMCFM,CM%SDH,,,,[FLDDB. (.CMQST,,,<string to find in "Subject" field,
 >,,[FLDDB. (.CMTXT)])])]

STQSB0:	PUSH P,A		; Save arg
	NOISE (string)
	POP P,A
	CALL RFIELD		; Read subject line or crlf
	MOVE A,CR.COD(A)	; Get code
	CAIN A,.CMCFM		; Just CR?
	JRST [	CMERR <No string given.>	; Yes - error
		JRST CMDER1]
	CAIN A,.CMQST		; Quoted string?
	SETOM ANDFLG		; Yes, flag that we might "and" qualifiers
	MOVEI B,ATMBUF		; Copy string to pattern buffer
	MOVEI A,PATSTR
	HRLI A,(POINT 7,)
	CALL MOVST0
	MOVE A,X		; Routine addrs
	JRST STQDL0
;Find substring in From, To, or Subject field

NXTKWD:	SKIPA C,[CALL KWDSTR]	; Routine to match keyword in message
NXTTO:	MOVE C,[CALL TOSTR]	; Routine to match To string
	JRST NXTAL0		; Join common loop
NXTSBJ:	SKIPA C,[CALL SBJSTR]	; Routine to match Subject string
NXTFRM:	MOVE C,[CALL FRMSTR]	; Routine to match From string
	JRST NXTAL0		; Use common loop


;Test routines to check for a string match in a message.  These are all
; called with D/ pointer to message block (MSGIDX(M))

FRMSTR:	$SAVE <A,C>		; Save these regs
	MOVEI T,PATSTR		; String to match
	MOVE V,MSGFRM(D)	; From field for this message
	MOVE W,MSGFRN(D)
	CALL SETSFL		;MAKE SURE 1 PAGE IS IN THE WINDOW
	MOVE A,MSGFAD
	IMULI A,5
	SUB V,WBOT
	ADD V,A			;MAKE NORMAL CHAR POINTER
	CALL SSEARC		; Look for string
	 RETSKP			; Not found - try next
	RET			; Found - use this

SBJSTR:	$SAVE <A,C>		; Save these regs
	MOVEI T,PATSTR		; String to match
	MOVE V,MSGSUB(D)	; Subject field for this message
	MOVE W,MSGSUN(D)
	CALL SETSFL		;MAKE SURE 1 PAGE IS IN THE WINDOW
	MOVE A,MSGFAD
	IMULI A,5
	SUB V,WBOT
	ADD V,A			;MAKE NORMAL CHAR POINTER
	CALL SSEARC		; Look for string
	 RETSKP			; Not found - try next
	RET			; Found - use this

TOSTR:	$SAVE <A,C>		; Save these regs
	PUSH P,D
	MOVEI T,PATSTR		; String to match
	MOVE V,MSGTO(D)		; To field for this message
	MOVE W,MSGTOK(D)	; Use entire To field
	CALL SETSFL		;MAKE SURE 1 PAGE IS IN THE WINDOW
	MOVE A,MSGFAD
	IMULI A,5
	SUB V,WBOT
	ADD V,A			;MAKE NORMAL CHAR POINTER
	CALL SSEARC
	 SKIPA			; Not found, try CC field
	JRST [	POP P,D		; Found... but don't jump into garbage!
		RET ]
	POP P,D			; SSearch trashes many things...
	SKIPN V,MSGCC(D)	; Is there any CC field to search?
	 RETSKP			;  Apparently not...
	MOVE W,MSGCCN(D)
	MOVEI T,PATSTR		; SSearch trashes this too!
	MOVE A,MSGFAD
	IMULI A,5
	SUB V,WBOT
	ADD V,A			; Make char pointer
	CALL SSEARC
	 RETSKP			; Not in CC either
	RET			; Got it!

KWDSTR:	$SAVE <A,C>		; Save these regs
	STKVAR <COUNT>
	MOVE V,MSGBOD(D)	; Point to entire message
	MOVE W,MSGBON(D)	;  ..
	CALL SETSFL		;make sure we are all right
KWDS1:	MOVEI T,PATSTR		; String to match
	MOVNM W,COUNT		;COMMON COUNT (NEGATIVE)
	ADD W,V			;POINTER TO THE END OF THE FIELD
	CAMLE W,WTOP		;FIT ?
	MOVE W,WTOP		;NO
	SUB W,V			;ACTUAL LENGHT
	ADDM W,COUNT		;UPDATE COUNT
	MOVE A,MSGFAD
	IMULI A,5
	SUB V,WBOT
	ADD V,A
	CALL SSEARC		; Check for this string
	 SKIPA
	RET			; Found
	SKIPN W,COUNT		; Not found
	RETSKP			;AND NOTHING TO SEARCH FOR
	MOVN W,W		;NEW COUNT
	MOVE V,WTOP		;NOW BEGIN FROM THE TOP
	SUBI V,40		;A LITTLE BACK UP
	CALL REMAP		;REMAP
	JRST KWDS1		;AND LOOK MORE
; Get date-time arg for "before" and "since" keywords

STQTMB:	MOVEI X,NXTTMB		; Rountine addrs
	MOVEI A,DEFTMB		; Date/time parse
	JRST STQTIM

STQTMS: MOVEI X,NXTTMS		; Routine addrs
	MOVEI A,DEFTMS		; Date/time parse
STQTIM:	PUSH P,A		; Save arg
	NOISE (Date and Time)
	POP P,A			; Restore arg
	CALL RFIELD
	MOVEM B,COMPDT		; Save it for compare
	MOVE A,X		; Copy routine to a
	JRST STQDL0		; Common exit

DEFTMB:	FLDDB1 (.CMTAD,CM%SDH,<CM%IDA!CM%ITM!TOPS10<CM%PST>>,<-1,,TMBTXT>,,DEFTIM)
DEFTMS:	FLDDB1 (.CMTAD,CM%SDH,<CM%IDA!CM%ITM!TOPS10<CM%PST>>,<-1,,TMSTXT>,,DEFTIM)
DEFTIM:	FLDDB1 (.CMTAD,CM%SDH,<CM%IDA!TOPS10<CM%PST>>,,,[FLDDB1 (.CMTAD,CM%SDH,<CM%ITM!TOPS10<CM%PST>>)])

TMBTXT:	ASCIZ \Date and Time:
Only messages with date-times prior to the specified
date and time will be used.\

TMSTXT:	ASCIZ \Date and Time:
Only messages with date-times greater than or equal to the
specified date and time will be used.\


; Compare date/time

NXTTMB:	SKIPA C,[CAMLE B,MSGDAT(D)]
NXTTMS: MOVE C,[CAMG B,MSGDAT(D)]
	MOVE B,COMPDT		; Date/time to compare against
	JRST NXTAL0		; Use common rountine
; Print out sequence

PRTSEQ:	SKIPGE A,LSTMSG		; Any last message?
	 JRST PRTSQ3		; No, install this one then
	CAIE M,-1(A)		; Yes, is this next or previous?
	CAIN M,1(A)		;  ..
	 JRST PRTSQ2		; Yes, keep accumulating
	CALL PRTSQS		; Print what is there now otherwise
PRTSQ1:	HRLM M,LSTMSG		; And set ourselves up as start
PRTSQ2:	HRRM M,LSTMSG		; Set ourselves up as next link in chain
	RET
PRTSQ3:	TXZ F,F%CMA		; Reset comma flag
	JRST PRTSQ1

PRTSQS:	SKIPGE LSTMSG		; Any messages selected at all?
	JRST [	WARN <No messages match this specification>
		RET]
	TXOE F,F%CMA		; Maybe a comma first
	$TEXT (KBFTOR,<,^A>)
	HLRZ A,LSTMSG		; Start of sequence
	ADDI A,1		; Make real message number
	$TEXT (KBFTOR,< ^D/A/^A>)
	HRRZ B,LSTMSG		; End of sequence
	CAIN A,1(B)		; Same (ie., sequence of one)?
	JRST PRTSQ0		; Yes, quit
	ADDI B,1		; Actual is 1 more than LSTMSG
	$TEXT (KBFTOR,<:^D/B/^A>)
PRTSQ0:	$CALL K%FLSH		; This can be slow, so say something
	RET			; Return
; Get next messages

NXTSEQ:	PUSH P,L		; Save msg pointer
	ILDB A,L		; Get next byte
	CAIE A,777777		; End?
	JRST NXTSQ0		; No, return msg number in M
	POP P,L			; Yes, restore L to prevent running past fence
	 RET			; Yes,single return
NXTSQ0:	POP P,M			; Adjust stack
	MOVEI M,(A)		; No, this is next message
	RETSKP			; Skip return
NXTSQ1:	MOVEI M,(A)		; No, this is next message
	RETSKP			; Skip return


;Routines to select messages based on message flag bits.
; These routines need not parse the messages (unless a match is found,
; in which case GTSQNR will parse them.)

NXTANS:	SKIPA B,[M%RPLY]	; Answered
NXTOLD:	MOVX B,M%SEEN		; Old := seen bit set
	JRST NXTDL0

NXTFLG:	SKIPA B,[M%ATTN]	; Flagged
NXTDEL:	 MOVX B,M%DELE		; Deleted
NXTDL0:	MOVE C,[TDNE B,MSGBTS(D)]	; Bit must be set
	JRST NXTAL4

NXTUNA:	SKIPA B,[M%RPLY]	; Unanswered
NXTUNF:	MOVX B,M%ATTN		; Unflagged
	JRST NXTUD0

NXTNEW:	SKIPA B,[M%SEEN]	; New := seen bit clear
NXTUND:	 MOVX B,M%DELE		; Undeleted
NXTUD0:	MOVE C,[TDNN B,MSGBTS(D)]	; Bit must be clear
NXTAL4:	MOVEI A,1(M)		; Start here
NXTAL5:	CAMLE A,LASTM		; Done?
	 JRST NXTEND		; Yes, see if any found
	GTMBL (A,D)  		; Get ptr to message block
	XCT C			; Test this message
	 JRST NXTSQ1		; Matches -- add to list
	AOJA A,NXTAL5		; No match, check next
;If selecting messages based on contents, must insure that the
; message is parsed before calling selection routine

NXTALL:	MOVSI C,(<JFCL>)	; All := pass all thru
NXTAL0:	MOVEI A,1(M)		; Start here
NXTAL1:	CAMLE A,LASTM		; Done?
	 JRST NXTEND		; Check if any done
	PUSH P,E
	GTMBL (A,D)  		; Get ptr to message block
	MOVX E,M%VALI		; Valid info for this msg?
	TDNN E,MSGBTS(D)	; If not, must parse it before testing it
	JRST [	EXCH A,M		; Msg to parse is c(A)
		PUSH P,C		; Save test instruction
		CALL PRSMSG		; Go parse it
		POP P,C
		EXCH A,M		; Restore ACs
		JRST .+1]		; Go test it now
	POP P,E
	XCT C			; Test it out
	 JRST NXTSQ1		; Matches
	AOJA A,NXTAL1		; No good, try next one

NXTEND:	JUMPGE M,R		; Ok if not -1
	HRRZ M,SAVEM		;  else restore prior current msg
	RET

NXTREV:	JUMPGE M,NXTRV1		; First time here?
	HRRZ A,LASTM		; Yes - start at end
	JRST NXTSQ1

NXTRV1:	MOVEI A,(M)		; Try next
	SOJGE A,NXTSQ1		; Keep going till all done
	RET
;Form message sequence of messages related to current one
;Return	+1: no related messages found
;	+2: related messages found and sequence stored

RELSEQ:	TRVAR <MIDX,THISL,THISM>
	MOVEM L,THISL		; Save current sequence pointer
	MOVEM M,THISM		; Save current M
	GTMBL (M,B)  		; Get ptr to message block
	MOVEM B,MIDX		; Save in safe place
	MOVX A,M%VALI		; Insure we've got valid information
	TDNN A,MSGBTS(B)	;  for this message
	CALL PRSMS0		;  ..
	MOVE B,MIDX		; Get index back
	SKIPN V,MSGREF(B)	; Any 'Reference:' field?
	JRST RELSQ0		; No, go check for replies to this then
	MOVE W,MSGRFN(B)	; Yes, get its length
	CALL FEQMID		; Find equal message-ID's
RELSQ0:	MOVE B,MIDX		; Restore Msg index, clobbered by FEQMID
	SKIPN V,MSGMID(B)	; Does this message have a message-ID?
	JRST RELSQX		; Doesn't have one, all done
	MOVE W,MSGMIN(B)	; Yes, get its length
	MOVE M,THISM		; Restore M for FEQREF
	CALL FEQREF		; Find equal reference fields
RELSQX:	MOVE M,THISM		; Restore M
	CAMN L,THISL		; Any messages added to sequence?
	RET			; No, failure return
	RETSKP
;FEQMID - Find message-ID's with equal contents to string
;FEQREF - Find references with equal contents to string
;Recurses up-level to RELSEQ to find messages related to messages related to...
;Call:
;	V/ character address of test string
;	W/ length of test string
;Return	+1: always, messages added to sequence via IDPB M,L

FEQMID:	MOVEI A,MSGMID		; Load address of field we're searching
	MOVEI B,MSGMIN		;  and its length
	JRST FEQ0		; Go join common code
FEQREF:	MOVEI A,MSGREF		; Same for reference field
	MOVEI B,MSGRFN		;  ..
FEQ0:	TRVAR <VW2,<MN2,2>,BADR,BLEN,MM>
	MOVEM W,VW2		; Save pointer and length to test string
	DMOVEM A,MN2		;  and pointers to ptr and length of object
	MOVEM M,MM		;STORE MESSAGE NUMBER

;NOW MOVE TEST STRING

	MOVE A,W		;SIZE OF TEST STRING
	ADDI A,5
	IDIVI A,5		;IN WORDS
	MOVEM A,BLEN
	$CALL M%GMEM		;GET MEMORY
	 JUMPF [WARN (SHORTAGE OF MEMORY IN FEQMID)
		RET]
	MOVEM B,BADR		;STORE THE ADRESS
	ADD B,[POINT 7,0]
EQQ1:	CALL GTBFL
	AOS V
	IDPB A,B		;MOVE BYTE
	SOJG W,EQQ1		;LOOP UNTIL DONE
	SETZ M,			; Scan all messages
EQFSQ0:	CAME M,MM		;DON'T CHECK ITSELF
	CALL CHKPRS		; Check for presence of this msg already
	 JRST EQFSQ2		; Already present, don't recurse infinitely
	CAMN M,HEADNR		;DON'T CHECK ROOT NUMBER
	 JRST EQFSQ2
	MOVX A,M%VALI		; Have valid data for this message yet?
	GTMBL (M,B)  		; Get ptr to message block
	TDNN A,MSGBTS(B)	;  ..
	CALL PRSMS0		; No, go parse it then
	DMOVE A,MN2		; Get ptr and length for MSGMID/MSGREF
	PUSH P,A
	GTMBL (M,A)  		; Get ptr to message block
	ADD A,(P)		; Index to current message
	ADJSP P,-1
    	SKIPN V,(A)		; Get appropriate character pointer
	JRST EQFSQ2		; Doesn't have one, so skip it
	PUSH P,B
	GTMBL (M,B)  		; Get ptr to message block
	ADD B,(P)		; Index to current message
	ADJSP P,-1
    	SKIPN D,(B)		; Get length of object string
	JRST EQFSQ2		; Zero length, skip this
	MOVE W,VW2		; Get length of test string
	CAMLE W,D		; Use MIN of object length and test length
	MOVE W,D		;  ..
	MOVE D,BADR
	ADD D,[POINT 7,0]	;CHAR POINTER
EQFSQ1:	CALL GTBFL		; Get character of header contents
	AOS V
	ILDB B,D		; Get character of test string
	CAME A,B		; Matching?
	JRST EQFSQ2		; No, skip this message then
	SOJG W,EQFSQ1		; Yes, do for all chars in test string
	IDPB M,L		; This message matches, add to sequence
	CALL CHKL		;CHECK THE RANGE
	CALL RELSEQ		; Now add msgs related to this one, recursively
	 JFCL			; Don't care if none found here
EQFSQ2:	CAME M,LASTM		; At last message?
	AOJA M,EQFSQ0		; Not yet, keep going
	MOVE A,BLEN
	MOVE B,BADR
	$CALL M%RMEM
	RET			; Yes, return
;CHECK TO SEE IF THERE IS MEMORY TO STORE 1 ELEMENT
CHKL:	PUSH P,L
	MOVEI L,1
	ADJBP L,(P)		;EVALUATING I
	TLZ L,777777		;ADRESS
	CAIN L,MSGSQE		;LAST WORD ?
	JRST NOMEM		;YES, ALARM
	POP P,L
	RET			;RETURN

NOMEM:	MOVE A,MSGSEQ
	CAIE A,MSGSSQ		;ARE WE AT THE VERY BEGINNING ?
	 JRST [ PUSH P,F	;NO
	 	JSP F,RESMSQ	;RESTORE CONTEXT
		POP P,F
		JRST .+1]
;**;[3107] Change 1 line at NOMEM+6		Ned 	9-Sep-88
	CMERR <ADDRESS SPACE TO STORE SEQUENCE EXHAUSTED>
	JRST CMDER1 	;AND GO TO THE START

;Check to see if a message, M, is already in the list
;Return	+1: already present
;	+2: not there yet

CHKPRS:	MOVE D,MSGSEQ
	ADD D,[POINT 18,0]
CHKPR0:	CAMN D,L		; Reached end of list yet?
	JRST RSKP		; Yes, give good return
	ILDB A,D		; No, get next message number
	CAME A,M		; Is this message it?
	JRST CHKPR0		; No, keep looking
	RET			; Yes, give nonskip return
;SEQUENCE SAVE/RESTORE ROUTINES

;SAVE MESSAGE SEQUENCE

SAVMSQ: TRVAR <<SAVLM,2>,SAVPRI,SVLCNT>
	DMOVEM L,SAVLM		; Save current read mode context L,M
	MOVE A,PRIORM		;  ..
	MOVEM A,SAVPRI		;  ..
	MOVE A,LCNT		; Save count of msgs in this sequence
	MOVEM A,SVLCNT		;  ..
	JUMPE A,RRR		; If no msgs to save, don't!
        ADDI A,2		;NO,COMPUTE BLOCK LENGHT
	ASH A,-1		;IN WORDS
	MOVE B,MSGSEQ		;SEQUENCE START ADRESS
	ADD A,B			;NEXT SEQUENCE START ADRESS
	CAIL A,MSGSQE		;NO MEMORY ?
	JRST NOMEM		;NO ANYMORE
	MOVEM A,MSGSEQ		;SAVE ITS ADRESS
RRR:	JRST (F)		;RETURN

;RESTORE MESSAGE SEQUENCE

RESMSQ: MOVE A,SVLCNT		; Get count of saved messages
	MOVEM A,LCNT		; Restore
	JUMPE A,RES1		; If none, this is easy
	ADDI A,2		;NO,COMPUTE BLOCK LENGHT
	ASH A,-1		;IN WORDS
	MOVE B,MSGSEQ		;GET ITS ADRESS
	SUB B,A			; Compute BLT fence
	MOVEM B,MSGSEQ		; RESTORE message sequence
RES1:   MOVE A,SAVPRI		;;  ..
	MOVEM A,PRIORM		;;  ..
	DMOVE L,SAVLM		;;  ..
	JRST (F)		;DONE
	END

; Edit 2452 to MSSEQ.MAC by MAYO on 18-Oct-85
; "verb SAME" shouldn't always claim %No previous sequence exists


; *** Edit 2486 to MSSEQ.MAC by PRATT on 22-Nov-85
; Copyright statements
; *** Edit 2494 to MSSEQ.MAC by MAYO on 5-Dec-85
; Add NEXT n for commands like READ, SUMMAR, etc.
; *** Edit 2601 to MSSEQ.MAC by MAYO on 5-Dec-85
; Allow number:NEXT n to do useful things.

; Edit= 3107 to MSSEQ.MAC on 23-Sep-88 by SANTEE
;Address was spelled incorrectly.