Google
 

Trailing-Edge - PDP-10 Archives - BB-KL11J-BM_1990 - t20src/newt20.b36
There are 11 other files named newt20.b36 in the archive. Click here to see a list.
!	COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1985, 1989.
!	ALL RIGHTS RESERVED.
!
!	THIS SOFTWARE IS FURNISHED UNDER A  LICENSE AND MAY BE USED AND  COPIED
!	ONLY IN  ACCORDANCE  WITH  THE  TERMS OF  SUCH  LICENSE  AND  WITH  THE
!	INCLUSION OF THE ABOVE  COPYRIGHT NOTICE.  THIS  SOFTWARE OR ANY  OTHER
!	COPIES THEREOF MAY NOT BE PROVIDED  OR OTHERWISE MADE AVAILABLE TO  ANY
!	OTHER PERSON.  NO  TITLE TO  AND OWNERSHIP  OF THE  SOFTWARE IS  HEREBY
!	TRANSFERRED.
!
!	THE INFORMATION IN THIS  SOFTWARE IS SUBJECT  TO CHANGE WITHOUT  NOTICE
!	AND SHOULD  NOT  BE CONSTRUED  AS  A COMMITMENT  BY  DIGITAL  EQUIPMENT
!	CORPORATION.
!
!	DIGITAL ASSUMES NO  RESPONSIBILITY FOR  THE USE OR  RELIABILITY OF  ITS
!	SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!
! This is the TOPS-20 System Specific portion of the MXUFIL utility module.
!
%routine ('ALLOC_BUFFER', FILE : ref FILE_DATA_BLOCK) =

!++
! FUNCTIONAL DESCRIPTION:
!     This routine adds a buffer to the buffer ring, or creates a buffer
!     ring if none exists.
!
! FORMAL PARAMETERS
!
!	.FILE     The address of the FILE DATA BLOCK
!
! IMPLICIT INPUTS
!
!	NONE.
!
! ROUTINE VALUE:
!
!	$TRUE if successful
!       $FALSE otherwise
!
! SIDE EFFECTS:
!
!	NONE.
!
!--

    BEGIN
    BIND
        first_buffer = .file [fd_current_buffer] : buffer_data_block;

    LOCAL
         buffer : REF buffer_data_block;

    EXTERNAL ROUTINE
             nmu$page_get;

    buffer = nmu$memory_get (buffer_data_block_allocation);

    buffer [bd_valid] = $false;

    !
    ! Get the number of a page to use as a buffer.
    !

    IF (buffer [bd_address] = nmu$page_get ()) EQL 0
    THEN
        BEGIN
        file [fd_error] = uf$cgp;       !Can't get page
        RETURN $false;
        END;

    !
    ! Convert the page number to an address and save it.
    ! Set up allocation and length of buffer.
    ! Build pointer to current position within buffer.
    !

    buffer [bd_address] = .buffer [bd_address] * page_size;

    buffer [bd_allocation] = page_size;
    buffer [bd_length] = page_size * (%BPVAL / .file [fd_byte_size]);

    !
    ! Link buffer into buffer ring
    !

    IF first_buffer EQL 0
    THEN
        BEGIN
        file [fd_current_buffer] = .buffer;
        buffer [bd_next] = .buffer;
        END
    ELSE
        BEGIN
        buffer [bd_next] = .first_buffer [bd_next];
        first_buffer [bd_next] = .buffer;
        END;

    RETURN $true

    END;				!End of ALLOC_BUFFER
%routine ('DEALLOC_BUFFER', file : REF file_data_block) : NOVALUE =

!++
! FUNCTIONAL DESCRIPTION:
!        This routine removes a buffer from the buffer ring.
!
! FORMAL PARAMETERS
!
!	.FILE     The address of the FILE DATA BLOCK
!
! IMPLICIT INPUTS
!
!	NONE.
!
! ROUTINE VALUE:
!
!	NONE.
!
! SIDE EFFECTS:
!
!	NONE.
!
!--

    BEGIN
    BIND
        buffer_ring = .file [fd_current_buffer] : buffer_data_block ;

    LOCAL
        buffer : REF buffer_data_block ;

    EXTERNAL ROUTINE
             nmu$page_release;

    buffer = buffer_ring;

    nmu$page_release ((.buffer [bd_address] / page_size));

    buffer [bd_address] = 0;
    buffer [bd_length] = 0;
    buffer [bd_allocation] = 0;

    IF .buffer [bd_next] EQL .buffer
    THEN 
        file [fd_current_buffer] = 0
    ELSE 
        file [fd_current_buffer] = .buffer [bd_next];

    nmu$memory_release (.buffer, buffer_data_block_allocation);

    RETURN $true

    END;				!End of DEALLOC_BUFFER
%routine ('OPEN_FILE', FILE : ref FILE_DATA_BLOCK, FN : ref FILE_NAME_BLOCK) =

!++
! FUNCTIONAL DESCRIPTION:
!
!	Performs system specific functions to allow access to a
!       file. Sets various fields within the FILE_BLOCK.
!
! FORMAL PARAMETERS
!
!	.FILE - Address of a file data block.
!       .FN - Address of a file name block.
!
! IMPLICIT INPUTS
!
!	NONE.
!
! ROUTINE VALUE:
!
!	$TRUE, if file is successfully opened;
!       $FALSE, otherwise.
!
! SIDE EFFECTS:
!
!	NONE.
!
!--

    BEGIN

    LOCAL
         err,
         gtjfn_flags,
         openf_flags;

    declare_jsys (gtjfn,openf,sizef,chfdb,rljfn);

    gtjfn_flags = gj_sht ;

    IF .file [fd_access] EQL file_access_write_only
    THEN
        gtjfn_flags = .gtjfn_flags OR gj_fou
    ELSE
        BEGIN
        gtjfn_flags = .gtjfn_flags OR gj_old;
        IF .file [fd_access] EQL file_access_append_only
        THEN
            gtjfn_flags = .gtjfn_flags OR gj_del;
        END;

    openf_flags = (fld (.file[fd_byte_size], of_bsz)
                   OR (IF .file[fd_access] EQL file_access_read_only
                       THEN of_rd
                       ELSE (of_rd OR of_wr)));

    !
    ! Get a JFN to the file. Use file name string in FD_NAME
    ! because GTJFN needs ASCIZ string.
    !

    IF NOT $$gtjfn (.gtjfn_flags, CH$PTR(file [fd_name]); file [fd_jfn])
    THEN
        BEGIN
        file [fd_error] = .file [fd_jfn];
        IF (.file [fd_error] EQL gjfx18)
        OR (.file [fd_error] EQL gjfx19)
        OR (.file [fd_error] EQL gjfx24)
        THEN
            file [fd_error] = uf$fnf;
        file [fd_jfn] = 0;
        RETURN $false;
        END;

    !
    ! Open the file for required access and byte size.
    !

    IF NOT $$openf (.file [fd_jfn], .openf_flags; err)
    THEN
        BEGIN
        file [fd_error] = .err;
        $$rljfn(.file [fd_jfn]);
        RETURN $false;
        END;
    !
    ! If file is being opened for write access only then it will
    ! be treated as a new file. Set its byte size in the FDB.
    !
    ! Otherwise it must be an existing file. Determine its length
    ! in bytes and save in file data block.
    !

    IF .file [fd_access] NEQ file_access_write_only
    THEN
        BEGIN
        IF NOT $$sizef(.file[fd_jfn];err,file[fd_length])
        THEN
            BEGIN
            $TRACE ('SIZEF failed on open of file %A - %J',
                CH$PTR(file[fd_name]),
                .err);

            file[fd_abort] = 1;
            close_file(.file);
            file[FD_ERROR] = .err;
            RETURN $false;
            END;

        file[fd_page_count] = (.file[fd_length]/(512*5)) + 1;
        END;
!    ELSE
        BEGIN
        LOCAL
             fdb_fbbyv;

        !
        ! Set word .FBBYV (11) of the files FDB, to reflect the
        ! files byte size.
        !

        fdb_fbbyv = fld (.file [fd_byte_size], fb_bsz);

        $$chfdb ((cf_nud OR fld ($fbbyv, cf_dsp)
                  OR fld (.file [fd_jfn], cf_jfn)),
                  fb_bsz,
                  .fdb_fbbyv);

        END;

    $true
    END;				!End of OPEN_FILE
%routine ('MAP_PAGE', FILE : ref FILE_DATA_BLOCK) =

!++
! FUNCTIONAL DESCRIPTION:
!     This routine does a PMAP to map a file page to the process.  The
!     appropriate counts and pointers to the buffer are maintained.
!
! FORMAL PARAMETERS
!
!	.FILE     The address of a FILE DATA BLOCK
!
! IMPLICIT INPUTS
!
!	NONE.
!
! ROUTINE VALUE:
!
!	NONE.
!
! SIDE EFFECTS:
!
!	NONE.
!
!--

    BEGIN
    BIND
        buffer = .file [fd_current_buffer] : buffer_data_block,
        bytes_per_page = .buffer [bd_length];

    LOCAL
         file_page,
         buffer_page,
         flag_count;

    declare_jsys (pmap);

    !
    ! This buffer is at next position to read from file.
    !

    buffer [bd_file_position] = .file [fd_file_position];

    !
    ! Set up to do PMAP. Get the files JFN. Calculate a page number
    ! in the file to be mapped. Page will be mapped into our process
    ! at page number determined by address in BD_ADDRESS. Preload
    ! the page and allow copy-on-write access.
    !
    ! Note that by using PMAP we can go directly to the page
    ! indicated by current position. Sequential access would
    ! require multiple file reads.
    !

    file_page<18,18> = .file [fd_jfn];
    file_page<0,18> = .file [fd_current_position] / bytes_per_page;
    buffer_page<18,18> = $fhslf;
    buffer_page<0,18> = .buffer [bd_address] / page_size;

    flag_count = pm_rd OR pm_wr ;

    !
    ! Assuming a sequential file the current page to be mapped
    ! should be less than the number of pages in the file.
    !

    IF NOT $$pmap (.file_page,.buffer_page,.flag_count)
    THEN
        BEGIN
        file [fd_error] = $last_error;
        RETURN $false;
        END;

    buffer [bd_current_position] = .file [fd_current_position] MOD bytes_per_page;

    buffer [bd_pointer] = CH$PTR (.buffer [bd_address],
                                  .buffer [bd_current_position],
                                  .file [fd_byte_size]);

    IF (.file [fd_current_position] + bytes_per_page) GEQ .file [fd_length]
    THEN
        BEGIN
        buffer [bd_end_of_file] = $true;
        buffer [bd_data_count] = .file [fd_length] MOD bytes_per_page;
        buffer [bd_remaining_count] = .file [fd_length] -
                                      .file [fd_current_position];
        END
    ELSE
        BEGIN
        buffer [bd_data_count] = bytes_per_page;
        buffer [bd_remaining_count] = bytes_per_page - .buffer [bd_current_position]
        END;

    !
    ! Update position in file.
    !

    buffer [bd_max_position] = .buffer [bd_file_position] +
                               .buffer [bd_data_count];

    file [fd_file_position] = .buffer [bd_max_position];


    !
    ! Buffer now has valid data.
    ! File is now positioned by amount of data read.
    !

    buffer [bd_valid] = $true;

    RETURN $true

    END;				!End of READ_FILE
%routine ('UNMAP_PAGE', FILE : ref FILE_DATA_BLOCK) =

!++
! FUNCTIONAL DESCRIPTION:
!     This routine PMAP to release a page that was mapped by a previous PMAP.
!     The buffer is invalidated.
!
! FORMAL PARAMETERS
!
!	.FILE     The address of a FILE DATA BLOCK
!
! IMPLICIT INPUTS
!
!	NONE.
!
! ROUTINE VALUE:
!
!	NONE.
!
! SIDE EFFECTS:
!
!	NONE.
!
!--

    BEGIN
    BIND
        buffer = .file [fd_current_buffer] : buffer_data_block,
        bytes_per_page = ((%BPVAL / .file [fd_byte_size]) * page_size);

    LOCAL
         buffer_page;

    declare_jsys (pmap);

    !
    ! Set up to do PMAP.  Buffer page will be unmapped.
    !

    buffer_page<18,18> = $fhslf;
    buffer_page<0,18> = .buffer [bd_address] / page_size;

    IF NOT $$pmap (-1, .buffer_page, 0)
    THEN
        BEGIN
        file [fd_error] = $last_error;
        RETURN $false;
        END;

    buffer [bd_valid] = $false;

    RETURN $true

    END;				!End of READ_FILE
%routine ('CKP', file: ref FILE_DATA_BLOCK) =
    BEGIN
    declare_jsys(chfdb,ufpgs);
    LOCAL
        openf_flags,
        err;

    $$ufpgs((.file[fd_jfn]^18) + MAX(.file[fd_page_count] - 1,0),
             .file[fd_length]/bytes_per_page - .file[fd_page_count] + 2);

!    $$chfdb ((cf_nud OR fld ($fbbyv, cf_dsp)
!              OR fld (.file [fd_jfn], cf_jfn)),
!              fb_pgc,
!              .file [fd_length]/bytes_per_page + 1);

    $$chfdb ((fld ($fbsiz, cf_dsp)
              OR fld (.file [fd_jfn], cf_jfn)),
              -1,
              .file [fd_length]);

    file[fd_page_count] = (.file[fd_length]/(512*5)) + 1;

    RETURN 0;
    END;
%routine ('CLOSE_FILE', FILE : ref FILE_DATA_BLOCK) =

!++
! Functional description:
!     Actually close an open file.
!
! Formal parameters:
!
!       .FILE    Address of file data block
!
! Implicit inputs:
!
!
! Routine value:
!
!       $true    close succeeded
!       $false   close failed
!
! Note:  Even if this routine fails, the file is no longer open
!        for access.  Close failure means that any changes written
!        to a file may not be saved.
!
!--

    BEGIN
    LOCAL
         err;

    declare_jsys (closf,chfdb,ufpgs,rljfn);

    !
    ! If this is a new file then update file length
    ! in bytes and save in files FDB.
    !
    ! NOTE: To handle the case of update mode access
    ! a flag must be maintained in the FD to indicate
    ! whether the file size has changed since it was
    ! opened and update the FDB only if it has changed
    ! to avoid updating when not necessary. This code
    ! will not do any updating now except for new files.
    !

    IF NOT .file [fd_abort]
    THEN
        BEGIN
        IF .file [fd_access] NEQ file_access_read_only
        THEN
            BEGIN
            $$chfdb ((cf_nud OR fld ($fbsiz, cf_dsp)
                      OR fld (.file [fd_jfn], cf_jfn)),
                      -1,
                      .file [fd_length]);

            IF .file [fd_access] EQL file_access_append_only
            THEN
                $$ufpgs((.file[fd_jfn]^18) + MAX(.file[fd_page_count] - 1,0),
                    .file[fd_length]/bytes_per_page - .file[fd_page_count] + 2)
            END;

!        $$chfdb ((cf_nud OR fld ($fbbyv, cf_dsp)
!                  OR fld (.file [fd_jfn], cf_jfn)),
!                  fb_pgc,
!                  .file [fd_length]/bytes_per_page + 1);

        $$chfdb ((fld ($fbctl, cf_dsp)
                  OR fld (.file [fd_jfn], cf_jfn)),
                 fb_del,
                 0);

        IF NOT $$closf (fld(.file [fd_jfn], co_jfn) ; err)
        THEN
            BEGIN
            file [fd_error] = .err;
            RETURN $false;
            END;
        END
    ELSE
        IF $$closf (fld(1, cz_abt) OR
                    fld(.file [fd_jfn], co_jfn) ; err)
        THEN
            $$rljfn(.file[fd_jfn])
        ELSE
            BEGIN
            file [fd_error] = .err;
            RETURN $false;
            END;

    RETURN $true

    END;				!End of CLOSE_FILE