Google
 

Trailing-Edge - PDP-10 Archives - BB-JR93K-BB_1990 - 10,7/galaxy/lptspl/lpttty.mac
There are 10 other files named lpttty.mac in the archive. Click here to see a list.
TITLE	LPTTTY - Terminal driver (LP20 Emulation) for LPTSPL-10
SUBTTL	D. Mastrovito/DPM/TL/DPM	16-OCT-89

;
;
;		COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION
;		     1984,1985,1986,1987,1990.
;			ALL RIGHTS RESERVED.
;
;     THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY  BE  USED
;     AND COPIED ONLY IN ACCORDANCE WITH THE TERMS OF SUCH LICENSE
;     AND WITH THE INCLUSION OF THE ABOVE COPYRIGHT NOTICE.   THIS
;     SOFTWARE  OR ANY OTHER COPIES THEREOF MAY NOT BE PROVIDED OR
;     OTHERWISE MADE AVAILABLE TO ANY OTHER PERSON.  NO  TITLE  TO
;     AND OWNERSHIP OF THE SOFTWARE IS HEREBY TRANSFERRED.
;
;     THE INFORMATION  IN  THIS  SOFTWARE  IS  SUBJECT  TO  CHANGE
;     WITHOUT  NOTICE  AND SHOULD NOT BE CONSTRUED AS A COMMITMENT
;     BY DIGITAL EQUIPMENT CORPORATION.
;
;     DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY
;     OF  ITS  SOFTWARE  ON  EQUIPMENT  WHICH  IS  NOT SUPPLIED BY
;     DIGITAL.
;

	SEARCH	GLXMAC			;SEARCH GALAXY PARAMETERS
	SEARCH	QSRMAC			;SEARCH QUASAR PARAMETERS
	SEARCH	ORNMAC			;SEARCH ORION/OPR PARAMETERS
	SEARCH	LPTMAC			;SEARCH LPTSPL PARAMETERS
	SEARCH	GALCNF			;SEARCH GALGEN PARAMETERS
	PROLOG	(LPTTTY)

IF2,<PRINTX Assembling GALAXY-10 LPTTTY>


	SALL				;FOR CLEAN LISTINGS
	.DIRECT	FLBLST			;FOR CLEANER LISTINGS

	ENTRY	LPTTTY			;LOAD IF LIBRARY SEARCH

	%%.LPT==:%%.LPT			;VERSION
SUBTTL	LPTTTY - Dispatch table


; This module will drive either an LA120 or LA180 hard copy
; terminal as a printer.  It is by far, the most simple of
; all the printer drivers for LPTSPL, and as such provides
; the customer with a template for writing drivers for other
; types of terminals (i.e. DIABLOs, etc.).

LPTTTY::DEVDSP	(TTY,<Terminal>)


; Table of LA120/LA180 compatible terminal types
TTYTYP:	SIXBIT	/LA50  /
	SIXBIT	/LA120 /
	SIXBIT	/LA210 /
	SIXBIT	/LA180 /
	G$$TTY
TTYLEN==.-TTYTYP			;LENGTH OF TABLE


; Some drivers require storage on a per-stream basis.  There are several
; words reserved for this purpose in the job data base.  The words may
; be defined as follows:

	 .ORG	J$DWDS			;DEFINE WORDS STARTING AT J$DWDS
FOOWDS:	BLOCK	2			;OR WHATEVER YOU NEED, UP TO J$DWDS
TTYANS:	BLOCK	1			;TERMINAL IS OF TYPE "ANSI"
TTYLP2:	BLOCK	1			;[4106] LP20 SIMULATION FLAG
TTYSIZ:!				;END OF DRIVER SPECIFIC STORAGE
	 .ORG

IF2,<
	IFL <DRVWDS-<TTYSIZ-J$DWDS>>,<
	PRINTX ? Terminal driver definitions overflow storage
	>
> ;END IF2


; Some drivers must maintain special status  information bits.  These
; may be stored in AC 'S'.  The mask STSDRV defines those bits which
; are reserved to the driver.
SUBTTL	TTYINX - Terminal Initialization


; Device initialization.  This routine is called by the
; SETUP message processor to initialize device dependent
; data in the job data base.
;
; Call:	MOVE	J, job data base address
;	MOVE	M, Page containing SETUP message or 0 if LPTSPL startup
;	PUSHJ	P,TTYINX
;
; TRUE return:	Initialization complete
; FALSE return:	S1 contains -1 if must try a different driver, or
;		S1 contains a standard response-to-setup code
;		S2 contains any extra attributes (for RSU.FL)

TTYINX:	JUMPE	M,.RETT			;RETURN IF LPTSPL INITIALIZATION
	MOVE	S1,STREAM##		;GET STREAM NUMBER
	MOVE	S1,JOBOBA##(S1)		;AND THE OBJECT BLOCK
	MOVE	S1,OBJ.ND(S1)		;GET STATION NUMBER
	PUSHJ	P,LPTANF##		;MUST BE ANF-10
	SKIPN	J$LLAT(J)		; OR A LAT LINE
	JUMPF	INIT.1			;NO: NOT OUR KIND OF DEVICE
	MOVE	S1,SUP.ST(M)		;GET DEVICE NAME
	PUSHJ	P,LPTLIN##		;GENERATE DEVICE NAME
	JUMPF	INIT.1			;DEVICE NOT OUR TYPE
	MOVE	T1,J$LDEV(J)		;GET DEVICE NAME
	DEVCHR	T1,UU.PHY		;GET DEVICE CHARACTERISTICS
	TXNE	T1,DV.TTY		;DEFEND AGAINST NUL
	TXNE	T1,DV.DSK		; OR NOT A TTY
	JRST	INIT.3			;  OR CONTROLLING A JOB
	MOVE	T1,[2,,T2]		;SET UP UUO AC
	MOVEI	T2,.TOTRM		;WANT TO READ TERMINAL TYPE
	MOVE	T3,J$LION(J)		;GET I/O INDEX
	TRMOP.	T1,			;READ TERMINAL TYPE
	  JRST	INIT.3			;PREHISTORIC MONITOR
	MOVSI	T2,-TTYLEN		;AOBJN POINTER
	CAME	T1,TTYTYP(T2)		;KNOWN TERMINAL TYPE?
	AOBJN	T2,.-1			;CHECK ENTIRE TABLE
	JUMPGE	T2,INIT.3		;RETURN IF UNKNOWN
	MOVEM	T1,J$LTYP(J)		;SAVE AS UNIT TYPE FOR QUASAR
	MOVE	T1,[XWD 2,T2]		;UUO POINTER
	MOVEI	T2,.TOAT2		;ANSI
	MOVE	T3,J$LION(J)		;GET UDX
	TRMOP.	T1,			;SEE IF ANSI TERMINAL
	  SETZ	T1,			;ASSUME NOT
	LDB	T2,[POINTR (T1,T2.ACL)]	;PICK UP ANSI CONFORMANCE LEVEL
	MOVEM	T2,TTYANS(J)		;SET THAT AS THE ANSI FLAG
	MOVE	T1,[XWD 2,T2]		;UUO POINTER
	MOVX	T2,.TOLCT		;LC
	MOVE	T3,J$LION(J)		;GET UDX
	TRMOP.	T1,			;SEE IF LOWER-CASE
	  SETO	T1,			;ASSUME UPPER-CASE
	SETZM	J$LLCL(J)		;DEFAULT TO UPPER CASE
	TRNN	T1,1			;LOWER-CASE?
	SETOM	J$LLCL(J)		;YES, REMEMBER THAT
	HRLZI	T1,LPTTTY		;POINT TO DISPATCH TABLE
	HRRI	T1,J$$DEV(J)		;MAKE A BLT POINTER
	BLT	T1,J$$DND(J)		;COPY INTO JOB STORAGE AREA
	SETOM	J$FFDF(J)		;WE DO FORM FEEDS

	MOVX	S1,.OFLYE		;[4106] SIMULATE BY DEFAULT
	LOAD	S2,SUP.FL(M),SUFLP2	;[4106] GET OPR-SET SIMULATION
	CAIN	S2,.OFLDF		;[4106] DEFAULTED?
	MOVE	S2,S1			;[4106] YES, USE DEFAULT
	SETZM	TTYLP2(J)		;[4106] ASSUME NO LP20-SIMULATION
	CAIE	S2,.OFLNO		;[4106] GUESS RIGHT?
	SETOM	TTYLP2(J)		;[4106] NOPE, LP20-SIMULATION WANTED
	SKIPE	TTYLP2(J)		;[4106] SIMULATING LP20?
	PUSHJ	P,VFUINX##		;[4106] YES, INITIALIZE THE SIMULATOR
	SETZ	TF,			;[4106] MAKE EXTRA ATTRIBUTE WORD
	STORE	S2,TF,OF.LP2		;[4106] 
	MOVE	S2,TF			;[4106] 
	MOVEI	S1,%RSUOK		;[4106] LOAD THE CODE
	$RETT

INIT.1:	MOVNI	S1,1			;-1 MEANS DEVICE NOT FOR US
	$RETF				;RETURN

INIT.2:	SKIPA	S1,[%RSUNA]		;UNIT NOT AVAILABLE
INIT.3:	MOVEI	S2,%RSUDE		;UNIT WILL NEVER BE AVAILABLE
	$RETF				;RETURN
SUBTTL	TTYIPC - Special IPCF message processing


; This routine will process any special messages peculiar to
; the device driver.
;
; Call:	MOVE	M, IPCF message address
;	MOVE	S2, message type
;	PUSHJ	P,TTYIPC
;
; TRUE return:	Message processed by this driver
; FALSE return:	Message unknown to this driver
;		S1 must contain -1, S2 must be preserved

TTYIPC:	MOVNI	S1,1			;WE HAVE NO SPECIAL MESSAGE
	$RETF				;RETURN
SUBTTL	TTYSCD - Scheduler call


; This routine is provided for drivers which must do special
; things at LPTSPL job scheduler level.  For most drivers, it
; is a no-op.
;
; Call:	MOVE	J,  job data base address
;	MOVE	P1, stream number
;	PUSHJ	P,TTYSCD
;
; TRUE return:	Always
; FALSE return:	Never

TTYSCD::$RETT				;RETURN
SUBTTL	TTYWAK - WAKEUP TIME CHECK


; This routine is provided for special devices that may have
; critical time dependencies.  The driver is called buy the
; CHKTIM routine to see if a premature wakeup is necessary.
;
; Call:	MOVE	J,  job data base address
;	MOVE	S1, current UDT
;	MOVE	S2, normal wakeup time
;	PUSHJ	P,TTYWAK
;
; TRUE return:	OK to zero JOBWKT if needed
; FALSE return:	Never zero JOBWKT under any circumstances
;
; On either return, S1 must be preserved and S2 may be altered to
; contain the desired wakeup time.  Most drivers will always want
; their JOBWKT entry zeroed unless their keeping track of several
; wakeup times.

TTYWAK:	$RETT				;RETURN
SUBTTL	TTYOPX - OPEN device

; This routine will setup device specific information for an OPEN.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYOPX
;
; TRUE return:	Appropriate response-to-setup code returned in S1
; FALSE return:	ditto

TTYOPX:	MOVEI	T1,.IOASC		;OPEN MODE
	PUSHJ	P,LPTOPN##		;SETUP I/O, OPEN CHANNEL, ETC.
	JUMPF	OPEN.1			;CAN'T HAVE IT RIGHT NOW
	SKIPE	TTYLP2(J)		;[4106] SKIP IF NO LP20 SIMULATION
	PUSHJ	P,VFUOPX##		;DO THE VFU OPEN TIME INTIALIZATION
	PUSHJ	P,INTCNL##		;CONNECT TO INTERRUPT SYSTEM
	JUMPF	OPEN.2			;GIVE UP
	TXO	S,INTRPT		;INDICATE WE'RE CONNECTED
	MOVEI	S1,%RSUOK		;LOAD THE CODE
	$RETT				;RETURN

OPEN.1:	SKIPA	S1,[%RSUNA]		;UNIT NOT AVAILABLE
OPEN.2:	MOVEI	S2,%RSUDE		;UNIT WILL NEVER BE AVAILABLE
	$RETF				;RETURN
SUBTTL	TTYCLS - CLOSE device

; This routine is called to CLOSE the channel.  In simple
; drivers which use standard TOPS-10 I/O facilities, this
; is accomplished with a CLOSE or RESDV. UUO.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYCLS
;
; TRUE return:	Always
; FALSE return:	Never

TTYCLS:	PJRST	LPTCLS##		;CALL COMMON CLOSE ROUTINE
SUBTTL	TTYFLS - Flush a job

; This routine is called whenever a job is to be flushed.
; Most drivers don't need to do anything special and a
; common routine in LPTSPL can be called.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYFLS
;
; TRUE return:	Always
; FALSE return:	Never

TTYFLS:	PJRST	LPTFLS##		;CALL COMMON FLUSH ROUTINE
SUBTTL	TTYFVU - Load VFU

; This routine is called to load the VFU for a printer.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYVFU
;
; TRUE return:	VFU loaded or no VFU needed
; FALSE return:	VFU load failed

TTYVFU:	CAIE	S1,1			;IS COMMAND "LOAD"?
	 PJRST	VFUVFU##		;NO, DO NOTHING NOW

	;HERE COMMAND IS "LOAD VFU".  VFUVFU WILL TELL US WHAT PITCH VFU
	;IT GOT.  IF THE VFU SPECIFIED A PARTICULAR VERTICAL PITCH, HONOR IT
	;IF THE PRINTER WE HAVE UNDERSTANDS ANSI (DEC PRIVATE) SEQUENCES.

	PUSHJ	P,VFUVFU##		;LET THE VFU HANDLER DO IT ALL
	 SKIPE	TTYANS(J)		;IF SIMPLE PRINTER, DON'T SELECT PITCH
	CAIN	C,356			;SIMPLE START?
	 PJRST	OUTDMP##		;YES, WE'RE DONE

	SETZ	S1,			;ASSUME BAD VFU
	CAIN	C,354			;6-LPI?
	 MOVEI	S1,"1"			;YES, CODE FOR THAT
	CAIN	C,355			;8-LPI?
	 MOVEI	S1,"2"			;YES, CODE FOR THAT
	JUMPE	S1,OUTDMP##		;I DON'T THINK THIS CAN HAPPEN
	PUSH	P,S1			;SAVE THE SELECTION CHAR
	MOVEI	C,.CHESC		;NOW, TELL THE PRINTER
	PUSHJ	P,PHSOUT##
	MOVEI	C,"["
	PUSHJ	P,PHSOUT##
	POP	P,C			;THE SELECTION CHAR
	PUSHJ	P,PHSOUT##
	MOVEI	C,"z"			;SET VERTICAL PITCH
	PUSHJ	P,PHSOUT##		;SO

	PJRST	OUTDMP##		;FORCE OUT THE BUFFERS
SUBTTL	TTYRAM - Load RAM


; This routine is called to load the character translation
; RAM for a printer.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYRAM
;
; TRUE return:	RAM loaded or no RAM needed
; FALSE return:	RAM load failed

TTYRAM:	PJRST	VFURAM##		;LET THE VFU HANDLER DO IT
SUBTTL	TTYLER - File LOOKUP error processing

; This routine is provided for special devices which accumulate
; LPTSPL run log data differently than most.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYLER
;
; TRUE return:	Never
; FALSE return:	Always

TTYLER:	PJRST	LPTLER##		;CALL COMMON ERROR ROUTINE
SUBTTL	TTYIER - File input error processing

; This routine is provided for special devices which accumulate
; LPTSPL run log data differently than most.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYIER
;
; TRUE return:	Never
; FALSE return:	Always

TTYIER:	PJRST	LPTIER##		;CALL COMMON ERROR ROUTINE
SUBTTL	TTYOUT - Output a buffer

; This routine is provided for special devices that cannot
; use the conventional output routine (LPTOUT) or must first
; condition the data before doing the output.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYOUT
;
; TRUE return:
; FALSE return:

TTYOUT:	PJRST	LPTOUT##		;CALL COMMON OUTPUT ROUTINE
SUBTTL	TTYOER - Output error processing


; This routine provides for driver or device-specific I/O error
; processing.  When called, both S1 and J$LIOS(J) will contain
; the returned I/O error status bits (GETSTS information).  No
; attempt will be made to determine the validity or severity of
; any errors.  That is left for the driver.
; Call:	MOVE	S1,J$LIOS(J)	;Justed updated with physical GETSTS
;	MOVE	S2,J$XIOS(J)	;Just updated with physical DEVOP.
;	PUSHJ	P,TTYOER
;
; TRUE return:	No output error or error recovery sucessful
; FALSE return:	Unrecoverable output error

TTYOER:	PUSHJ	P,VFUOER##		;LET THE VFU HANDLER FIDDLE WITH ERRORS
	PJRST	LPTOER##		;CALL LPTSPL TO PROCESS
SUBTTL	TTYEOX - Output EOF processing

; This routine is called at the end of the job to do special
; EOF processing for the device being used.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYEOX
;
; TRUE return:	Always
; FALSE return:	Never

TTYEOX:	$RETT				;NO SPECIAL PROCESSING
SUBTTL	TTYBJB - Begining of job


; This routine is called at the begining of job processing.
; It is used to reset device dependent job parameters such
; as switching back to a default font.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYBJB
;
; TRUE return:	Always
; FALSE return:	Never

TTYBJB:	MOVEI	C,.CHCRT		;MAKE SURE (AB)USER DIDN'T
	PUSHJ	P,PHSOUT##		;LEAVE THE CARRIAGE SOMEPLACE STRANGE
	$RETT				;RETURN
SUBTTL	TTYEJB - End of job


; This routine is called at the end of job processing.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYEJB
;
; TRUE return:	Always
; FALSE return:	Never

TTYEJB:	$RETT				;RETURN
SUBTTL	TTYBFL - Begining of input file


; This routine is called at the begining of input file
; processing. It; is used to reset device dependent file
; parameters such as non-sticky font specs and attributes.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYBFL
;
; TRUE return:	Print file
; FALSE return:	Do not print file

TTYBFL:	$RETT				;RETURN
SUBTTL	TTYEFL - End of input file


; This routine is called at the end of input file
; processing.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYEFL
;
; TRUE return:	Continue file processing
; FALSE return:	Do not print additional copies of file

TTYEFL:	$RETT				;RETURN
SUBTTL	TTYBAN - Banner initialization

; This routine is called at the start of banner processing.
; It is used to alter the appearance if a banner page.  For
; example, a special font or page orientation could be selected
; at this time and it would only affect the printing of the
; banner page.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYBAN
;
; TRUE return:	Always
; FALSE return:	Never

TTYBAN:	$RETT				;RETURN
SUBTTL	TTYHDR - Header initialization

; This routine is called at the start of header processing.
; It is used to alter the appearance if a header page.  For
; example, a special font or page orientation could be selected
; at this time and it would only affect the printing of the
; header page.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYHDR
;
; TRUE return:	Always
; FALSE return:	Never

TTYHDR:	$RETT				;RETURN
SUBTTL	TTYWID - Header width initialization

; This routine is called to initialize the page width for
; header processing.  It is needed because page orientation
; (determined by LPTTTY) could affect the width of the page
; hence, the number of characters that may be printed on a
; single line.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYWID
;
; TRUE return:	Always
; FALSE return:	Never

TTYWID:	$RETT				;RETURN
SUBTTL	TTYRUL - Ruler processing

; This routine is called to output the ruler lines between jobs.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYRUL
;
; TRUE return:	Always
; FALSE return:	Never

TTYRUL:	PJRST	LPTRUL##		;LET COMMON CODE DO IT
SUBTTL	TTYSHT - Stream shutdown


; This routine is called when a stream is shutdown, just
; prior to releasing the job data page.
;
; Call:	MOVE	J, job data base address
;	PUSHJ	P,TTYSHT
;
; TRUE return:	Always
; FALSE return:	Never

TTYSHT:	PJRST	VFUSHT##		;LET THE VFU HANDLER DO IT
SUBTTL	TTYSTS - Status message generation


; This routine allows a driver to append device specific data to the
; status update message text which is sent to QUASAR.  This text is
; appears on queue listings and SHOW STATUS displays.  It appears as
; the second line of request or unit status display.  LPTSPL will start
; the text with "   Started at ...".  The driver may then append useful
; information such as "printed 47 out of 56 pages".

TTYSTS::PJRST	LPTSTS##		;CALL COMMON CODE
SUBTTL	TTYCHR - File data intercept

; This routine is called for file data only, if the character in C
; is in the break mask pointed to by J$DBRK and the special interpretation
; (graphics) flag is set. (J$FASC .LT. 0)  See FILCHR.
;
; Call:	MOVE	J, job data base address
;	MOVE	C, break character
;	PUSHJ	P,TTYCHR
; TRUE return:	Break condition handled
; FALSE return:	Abort job (eg, error in escape sequence)

TTYCHR:	$RETT
SUBTTL	TTYCHO - Character translator


; This routine will handle character translation.  Called when a character
; is about to be sent to what everyone else thinks is the physical device.
; It simulates a hardware translation RAM.
;
; Call:	MOVE	J, job data base address
;	MOVE	C, intercepted character
;	PUSHJ	P,TTYCHO
; TRUE return:	Character translated if necessary, caller to output
; FALSE return:	Character processed here, nothing to output

TTYCHO:	SKIPE	TTYLP2(J)		;DOING SIMULATION?
	PJRST	VFUCHO##		;THE VFU HANDLER CAN DO IT
	$RETT				;LEAVE CHARACTER ALONE
SUBTTL	Literal pool


TTYLIT:	LIT

TTYEND::!END