Google
 

Trailing-Edge - PDP-10 Archives - BB-JR93K-BB_1990 - 10,7/decmai/mx/tbl.r36
There are 14 other files named tbl.r36 in the archive. Click here to see a list.
!	COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1985, 1989.
!	ALL RIGHTS RESERVED.
!
!	THIS SOFTWARE IS FURNISHED UNDER A  LICENSE AND MAY BE USED AND  COPIED
!	ONLY IN  ACCORDANCE  WITH  THE  TERMS OF  SUCH  LICENSE  AND  WITH  THE
!	INCLUSION OF THE ABOVE  COPYRIGHT NOTICE.  THIS  SOFTWARE OR ANY  OTHER
!	COPIES THEREOF MAY NOT BE PROVIDED  OR OTHERWISE MADE AVAILABLE TO  ANY
!	OTHER PERSON.  NO  TITLE TO  AND OWNERSHIP  OF THE  SOFTWARE IS  HEREBY
!	TRANSFERRED.
!
!	THE INFORMATION IN THIS  SOFTWARE IS SUBJECT  TO CHANGE WITHOUT  NOTICE
!	AND SHOULD  NOT  BE CONSTRUED  AS  A COMMITMENT  BY  DIGITAL  EQUIPMENT
!	CORPORATION.
!
!	DIGITAL ASSUMES NO  RESPONSIBILITY FOR  THE USE OR  RELIABILITY OF  ITS
!	SOFTWARE ON EQUIPMENT THAT IS NOT SUPPLIED BY DIGITAL.
!++
!           The following macro initializes a tbluk table.  It may be
!       used in the following manner:
!
!       STACKLOCAL              !or OWN
!           tbl: tbluk_table(100);
!
!           This case allocates space for a tbluk_table capable of
!       holding 100 elements.
!
!       STACKLOCAL
!           tbl: tbluk_table(0,                 !Size is 0 (minimum size)
!                            'Abort',0,(),      !key='Abort', Data=0, No flags
!                            'Bomb',1,(INV),    !Key='Bomb', Data=1, INVisible
!                            'Cr',-1,(NOR,INV), !Key='Cr', Invisible,Norec
!                            'Crash,2,()        !key='Crash', Data=2, No flags
!                            );
!           This form reserves a table with only those four entries.
!       INV, NOR, and ABR are defined as flags which set the
!       appropriate bits in the argument block.  If the size field had
!       been greater than 0, then the table would have been allocated
!       to hold that many entries instead of the minimum size.  This
!       allows tbluk_tables to have room for expansion if desired.
!
!--
COMPILETIME 
    args_ = 0,
    siz_ = 0;

MACRO
    tbluk_table(siz)[] =    
        %ASSIGN(args_,(%LENGTH - 1) / 3)
        %IF siz LEQ 0
        %THEN
            %ASSIGN(siz_,args_)
        %ELSE
            %ASSIGN(siz_,siz) %FI

        tbl[siz_] INITIAL(args_ ^ 18 + siz_,
                         %IF NOT %NULL(%REMAINING)
                         %THEN tblent(%REMAINING) , %FI
                         REP (siz_ - args_) OF (0)) %;

MACRO
    tblent(key,val,flgs)[] =    !Used by TBLUK_TABLE macro
        UPLIT(tblflg(%remove(flgs))
              %ASCIZ key) ^ 18 + val
        %IF NOT %NULL(%REMAINING) %THEN ,tblent(%REMAINING) %FI %;
        
MACRO
    tblflg(flg)[] =             !Used by TBLENT macro
        %IF NOT %NULL(flg)
        %THEN
            %IF %COUNT EQL 0 %THEN cm_fw %FI

            %IF %IDENTICAL(flg,INV) %THEN OR cm_inv %ELSE
            %IF %IDENTICAL(flg,NOR) %THEN OR cm_nor %ELSE
            %IF %IDENTICAL(flg,ABR) %THEN OR cm_abr %ELSE
            OR flg %FI %FI %FI

            %IF %NULL(%REMAINING) %THEN , %FI

            tblflg(%REMAINING) 
        %FI %;
!++
!           The following fields and macros describe the bits and
!       fields in a TBLUK table ENTry, and in the ARGument block.
!--
FIELD
    arg_fields =
        SET
        ARG_INV  = [0,0,1,0],   !cm%inv
        ARG_NOREC= [0,1,1,0],   !cm%nor
        ARG_ABR  = [0,2,1,0],   !cm%abr
        ARG_FLAG = [0,28,8,0]   !cm%fw
        TES,

    ent_fields =
        SET
        ENT_WORD = [0,0,36,0],  !The whole word
        ENT_KEY = [0,18,18,0],  !The key address
        ENT_DATA = [0,0,18,0]   !The data field
        TES;

MACRO
    tbl_arg_block = 
        BLOCK[1] FIELD(arg_fields) %,

    tbl_entry =
        BLOCK[1] FIELD(ent_fields) %;

!++
!           The following macro describes the fields used in the TBL
!       data structure.
!--
MACRO
    tbl_maximum_entries = 0,0,18 %,
    tbl_actual_entries = 0,18,18 %,
    tbl_word = 0,36 %,
    tbl_key  = 18,18 %,
    tbl_data = 0,18 %;

!++
!           The following structure defines a tbluk table
!--
LITERAL
    def_tbl_siz = 50;

STRUCTURE
    tbl [i,j,k; tbl_siz=def_tbl_siz] =
        [tbl_siz + 1]
        (tbl + i)<j,k,0>;
!++
!           Return codes for TBL_LOOKUP, TBL_ADD, and TBL_DELETE
!--
LITERAL
    tbl_nomatch =       0,      !Tbl_lookup
    tbl_exactmatch =    1,
    tbl_ambiguous =     2,
    tbl_abreviation =   3,

    tbl_full =          0,      !Tbl_add
    tbl_entry_exists =  2,

    tbl_empty =         0,      !Tbl_delete
    tbl_invalid_index = 2,
    tbl_ok =            1,      !Tbl_ok can be returned by both
                                !TBL_ADD and TBL_DELETE

    tbl_lessthan =     -1,      !Only used internally
    tbl_equalto =       0,
    tbl_greaterthan =   1;
!++
!           KEY$ returns the address of the ASCIZ key string from the
!       tbluk_table.  It knows about the ARG_FLAG and the two
!       different formats for the argument block.
!
!       TT:     The address of the tbluk table.
!       II:     The value of the index.
!       FLG:    The address to return the flags in (May be omitted)
!--
MACRO 
    key$(tt,ii,flg) =
        BEGIN
        LOCAL
            argument: REF tbl_arg_block;

        argument = .tt[ii, TBL_KEY];
        IF .argument[ARG_FLAG] EQL 1
        THEN
            BEGIN
            %IF NOT %NULL(flg) %THEN flg = .argument[ARG_NOREC]; %FI
            .argument + 1
            END
        ELSE
            BEGIN
            %IF NOT %NULL(flg) %THEN flg = 0; %FI
            .argument
            END
        END %;

!++
!           SEQ generates a sequence of integers
!
!       min, min+1, min+2, ... max
!
!       It is used to generate the UpperCase translation TABle.
!--
MACRO
    seq(min,max)[] =
        min
        %IF min LSS max %THEN , seq(min + 1, max) %FI %;