Trailing-Edge
-
PDP-10 Archives
-
BB-FP64A-SB_1986
-
10,7/fedel/fedel.mac
There are 5 other files named fedel.mac in the archive. Click here to see a list.
TITLE FEDEL -- Delete tracks of front-end file system
SUBTTL G.M. Uhler/GMU 17-Jul-80
;This program zeroes the words in both HOM blocks of a disk containing
;information about the RSX20F front-end file system and then zeroes
;every 400 blocks on the pack starting at block 0 to destroy the
;front-end HOM block. This action removes all tracks that a front-end
;file system ever existed on the pack and allows a new one to be built.
;Copyright (C) 1980,1981,1982,1983 by
;Digital Equipment Corporation, Maynard, Mass.
;
;
;This software is furnished under a license and may be used and copied
;only in accordance with the terms of such license and with the
;inclusion of the above copyright notice. This software or any other
;copies thereof may not be provided or otherwise made available to any
;other person. No title to and ownership of the software is hereby
;transferred.
;
;The information in this software is subject to change without notice
;and should not be construed as a commitment by Digital Equipment
;Corporation.
;
;Digital assumes no responsibility for the use or reliability of its
;software on equipment which is not supplied by Digital.
SEARCH JOBDAT,MACTEN,UUOSYM
SALL
FDLVER==1 ;Major version number
FDLMIN==0 ;Minor version number
FDLEDT==6 ;Edit number
FDLWHO==0 ;Who last edited
TWOSEG
RELOC 400000
LOC .JBVER
VRSN. (FDL)
RELOC
;AC Definitions
T1==1 ;First of 4 temporaries
T2==2
T3==3
T4==4
P1==5 ;First of 4 preserved
P2==6
P3==7
P4==10
P==17 ;PDL pointer
;Miscelaneous definitions
PDLLEN==10 ;Length of PDL
BLKINC==400 ;Stomp every this many blocks on the disk
BLKSIZ==200 ;Size of a disk block
DSK==1 ;Disk channel
DEL==2 ;Channel to delete FE.SYS
HOM1==1 ;Block address of first HOM block
HOM2==12 ;Block address of second HOM block
HOMHID==1 ;Unit ID in HOM block
HOMFEB==61 ;HOM block offset of pointer to FE
HOMFEL==62 ;HOM block offset of length of FE
RIBSTS==17 ;RIB offset of status bits
RIPNDL==1B19 ;No delete bit in RIB
RIBSLF==177 ;RIB offset of RIB block number
EO.ERR==1 ;Error message
EO.WRN==2 ;Warning message
EO.STP==4 ;Stop program on this error
EO.NCR==10 ;No CRLF at the end of this error
DEFINE ERROR(MSG,OPT,LABEL),<
PUSHJ P,ERRMSG
XLIST
..OPT==EO.ERR ;Initialize type
IRP OPT,<
IFIDN <OPT>,<STOP>,<..OPT==..OPT!EO.STP>
IFIDN <OPT>,<NOCRLF>,<..OPT==..OPT!EO.NCR>
>
IFB <LABEL>,<
CAI ..OPT,[ASCIZ/?'MSG/]
>
IFNB <LABEL>,<
CAIA ..OPT,[ASCIZ/?'MSG/]
JRST LABEL
>
LIST
>
DEFINE WARN(MSG,OPT,LABEL),<
PUSHJ P,ERRMSG
XLIST
..OPT==EO.WRN ;Initialize type
IRP OPT,<
IFIDN <OPT>,<STOP>,<..OPT==..OPT!EO.STP>
IFIDN <OPT>,<NOCRLF>,<..OPT==..OPT!EO.NCR>
>
IFB <LABEL>,<
CAI ..OPT,[ASCIZ/%'MSG/]
>
IFNB <LABEL>,<
CAIA ..OPT,[ASCIZ/%'MSG/]
JRST LABEL
>
LIST
>
FEDEL: JFCL ;Ignore CCL entry
RESET ;Stop the world
GETPPN T1, ;GET OUR PPN
JFCL ;AVOID STUPID SKIP
CAME T1,[1,,2] ;Privileged?
ERROR <Job not privileged, must be run as [1,2]>,STOP
OUTSTR [ASCIZ/
***********************************************************************
* This program deletes all traces of an RSX20F front-end file system. *
* In doing so, it destroys the ENTIRE contents of the pack. *
* DO NOT CONTINUE if this is not what you want to do. *
***********************************************************************
/]
MOVE P,[IOWD PDLLEN,PDL] ;Setup PDL
OUTSTR [ASCIZ/
Physical unit name: /]
PUSHJ P,GETNAM ;Get name of unit, return in P1
JRST NOTPHY ;Give error message
MOVEM P1,DSCBLK+.DCNAM ;Store name in DSKCHR block
MOVE P2,[.DCUSZ+1,,DSCBLK] ;Point at the block
DSKCHR P2, ;See what the monitor thinks
JRST NOTPHY ;It doesn't
LDB T2,[POINTR P2,DC.TYP] ;Get type of unit
CAXE T2,.DCTPU ;Must be physical unit
NOTPHY: ERROR <Not a physical unit>,STOP
LDB T1,[POINTR P2,DC.CNT] ;Get type of controller
LDB T2,[POINTR P2,DC.UNT] ;Get type of drive
CAXN T1,.DCCRP ;RH10/RH20?
CAXLE T2,.DCUR6 ;Yes, RP04 or RP06?
ERROR <Not an RP04 or RP06>,STOP
OUTSTR [ASCIZ/
You have specified unit /]
MOVE T2,P1 ;Get unit name
PUSHJ P,PRTNAM ;Print it
SKIPN T2,DSCBLK+.DCSNM ;Get STR name if any
JRST FEDEL1 ;None, skip it
OUTSTR [ASCIZ/
Structure ID for the pack mounted on this unit is /]
PUSHJ P,PRTNAM ;PRINT STR NAME
FEDEL1: MOVX T1,UU.PHS!.IODMP ;Need a physical device in dump mode
MOVE T2,P1 ;Get device name
MOVX T3,0 ;No buffers in dump mode
OPEN DSK,T1 ;OPEN the channel
ERROR <Can't OPEN specified unit>,STOP
MOVX T1,HOM1 ;Point at first HOM block
PUSHJ P,REDBLK ;Read it
ERROR <Read error on first HOM block>,NOCRLF,IOEPRT
MOVE T2,BUF+HOMHID ;Get unit ID from HOM block
OUTSTR [ASCIZ/
HOM block unit ID for this unit is /]
PUSHJ P,PRTNAM ;Print it
OUTSTR [ASCIZ/
Continuing will destroy the ENTIRE contents of this pack.
Do you wish to continue? /]
PUSHJ P,YESNO ;Ask for YES or NO
JRST FEDEL3 ;No
PUSHJ P,DELFIL ;Delete FE.SYS
WARN <Delete of FE.SYS failed>
SETZM BUF+HOMFEB ;Clear pointer to FE
SETZM BUF+HOMFEL ;Plus length
MOVX T1,HOM1 ;Get back address
PUSHJ P,WRTBLK ;Write it back
ERROR <Write error on first HOM block>,NOCRLF,IOEPRT
MOVX T1,HOM2 ;Point at second HOM block
PUSHJ P,REDBLK ;Read it
ERROR <Read error on second HOM block>,NOCRLF,IOEPRT
SETZM BUF+HOMFEB ;Clear pointer to FE
SETZM BUF+HOMFEL ;Plus length
MOVX T1,HOM2 ;Get back address
PUSHJ P,WRTBLK ;Write it back
ERROR <Write error on second HOM block>,NOCRLF,IOEPRT
SETZM BUF ;Clear first word of buffer
MOVE T1,[BUF,,BUF+1] ;Setup BLT pointer
BLT T1,BUF+177 ;Clear entire buffer
MOVX P3,0 ;Init block pointer
FEDEL2: MOVE T1,P3 ;Transfer block address
CAML T1,DSCBLK+.DCUSZ ;Still on unit?
JRST FEDEL3 ;No, quit
PUSHJ P,WRTBLK ;Write zeros into that block
ERROR <Write error zeroing block>,NOCRLF,IOEPRT
ADDI P3,BLKINC ;Bump to next block to zero
JRST FEDEL2 ; and loop
FEDEL3: RELEAS DSK, ;Release channel
MONRT. ;Exit quietly
JRST FEDEL ;Loop if CONT
;Routine to process the ERROR and WARN macros.
;Return+2 always unless EO.STP is set
ERRMSG: OUTSTR CRLF ;Start on a new line
MOVE T1,@0(P) ;Get CAI word
OUTSTR (T1) ;Put out the message
TXNN T1,<<EO.NCR>B12> ;No CRLF wanted?
OUTSTR CRLF ;No, add one
TXNN T1,<<EO.STP>B12> ;Stop on this error?
JRST CPOPJ1 ;No, return
JRST KILL ;Stop the program
;Here on I/O errors from the disk to print the block number and
;status and give up
IOEPRT: OUTSTR [ASCIZ/, block = /]
MOVE T1,LSTBLK ;Get block number
PUSHJ P,PRTOCT ;Print it
OUTSTR [ASCIZ/, status = /]
MOVE T1,ERRSTS ;Get status
PUSHJ P,PRTOCT ;Print it
OUTSTR CRLF
KILL: RESET ;Insure all is stopped
EXIT ; and give up
;Routine to delete FE.SYS from the pack selected in the startup
;dialog. Call with:
; P1/Device name
;Return+1 if couldn't delete the file
;Return+2 if file was deleted
DELFIL: MOVX T1,UU.PHS!.IODMP ;Physical device in dump mode
MOVE T2,P1 ;Get device name
MOVX T3,0 ;No buffers
OPEN DEL,T1 ;Open channel
POPJ P, ;Failed
MOVE T4,[DELBLK,,T1] ;Setup to move LOOKUP block
BLT T4,T4 ;Move it
LOOKUP DEL,T1 ;LOOKUP FE.SYS
JRST [TRNE T2,-1 ;File not found?
POPJ P, ;No, give non-skip return
JRST CPOPJ1] ;Yes, give skip return
USETI DEL,0 ;Set to read RIB
STATZ DEL,IO.ERR ;Any errors?
POPJ P, ;Yes, return
INPUT DEL,DSKIOW ;Read the RIB of the file
STATZ DEL,IO.ERR ;Any errors?
POPJ P, ;Yes, return
MOVEI T1,DEL ;Get the channel
MOVEM T1,DSCBLK+.DCNAM ;Store for DSKCHR
MOVE T1,[.DCUPN+1,,DSCBLK] ;Setup for DSKCHR
DSKCHR T1, ;Find out where the RIB is
POPJ P, ;Failed
CLOSE DEL,CL.DAT ;Close and toss monitor core blocks
MOVX T1,UU.PHS!.IODMP ;Physical device in dump mode
MOVE T2,DSCBLK+.DCUPN ;Get physical unit name
MOVEI T3,0 ;No buffers
OPEN DEL,T1 ;Open the channel
POPJ P, ;Failed
MOVX T1,RIPNDL ;Get no delete bit
ANDCAM T1,BUF+RIBSTS ;Clear it in RIBSTS
USETO DEL,BUF+RIBSLF ;Set to write block back
STATZ DEL,IO.ERR ;Errors?
POPJ P, ;Yes, return
OUTPUT DEL,DSKIOW ;Rewrite RIB
STATZ DEL,IO.ERR ;Errors?
POPJ P, ;Yes
MOVE T4,[DELBLK,,T1] ;Setup to move LOOKUP block
BLT T4,T4 ;Move it
LOOKUP DEL,T1 ;LOOKUP file again
POPJ P, ;Failed
SETZB T1,T2 ;Clear name and extension for delete
RENAME DEL,T1 ;Delete it
POPJ P, ;Failed
CLOSE DEL, ;Close the file
RELEAS DEL, ;Release channel
JRST CPOPJ1 ;Give skip return
;Routine to read a command from the terminal. Store the command
;in CMDBUF and a byte pointer in CMDB.
;Return+1 always
REDCMD: MOVE T2,[POINT 7,CMDBUF] ;Get pointer to buffer
MOVEM T2,CMDB ;Save for caller
MOVX T3,^D80 ;Allow only 80 chars
REDCM1: PUSHJ P,GETCHR ;Get next character
PUSHJ P,CHKBRK ;Break?
SKIPA ;No
JRST REDCM2 ;Yes, finish up
SOJL T3,REDCM1 ;Loop if too many
IDPB T1,T2 ;Store in buffer
JRST REDCM1 ; and loop
REDCM2: MOVEI T1,0 ;Terminate buffer
IDPB T1,T2 ; with two
IDPB T1,T2 ; zeros
POPJ P, ; and return
;Routine to read one character from the TTY. Ignores nulls and
;carriage returns, maps lower to upper case.
;Return+1 always with
; T1/Character
GETCHR: INCHWL T1 ;Get character
JUMPE T1,GETCHR ;Loop if null
CAXN T1,.CHCRT ; or if CR
JRST GETCHR ;...
CAIL T1,"a" ;Lower case character?
CAILE T1,"z" ;...
POPJ P, ;No, just return it
SUBI T1,"a"-"A" ;Fold to upper case
POPJ P, ; and return
;Routine to check for break character. Call with:
; T1/Character
;Return+1 if not a break character
;Return+2 if a break character
CHKBRK: PUSH P,T2 ;Destroy no ACs
MOVX T2,1 ;Get a bit to shift
LSH T2,(T1) ;Shift by value of character
TDNE T2,BRKTBL ;This a break character?
AOS -1(P) ;Yes, bump return point
POP P,T2 ;Restore T2
POPJ P, ; and return
BRKTBL: 1_.CHBEL!1_.CHVTB!1_.CHFFD!1_.CHCNZ!1_.CHESC!1_.CHLFD
;Routine to print a SIXBIT name on the TTY. Stops on the first
;space. Call with:
; T2/SIXBIT word
;Return+1 always
PRTNAM: LSHC T1,^D36 ;Move to T1, clear T2
LSHC T1,-<5*6> ;Right justify char in T1
JUMPE T1,CPOPJ ;Return on first null
MOVEI T1,"0"-'0'(T1) ;Convert to ASCII
OUTCHR T1 ;Output it
PJRST PRTNAM ;Loop for all chars
;Routine to get a SIXBIT name from the terminal.
;Return+1 if bad name typed
;Return+2 with SIXBIT name in P1
GETNAM: PUSHJ P,REDCMD ;Read in the command
MOVX P1,0 ;Init name
MOVE T2,[POINT 6,P1] ;Build byte pointer to P1
GETNA1: ILDB T1,CMDB ;Get next character
JUMPE T1,CPOPJ1 ;Return at end of line
CAIN T1,":" ;Specify a colon?
JRST GETNA2 ;Yes
SUBI T1,"A"-'A' ;Convert to SIXBIT
TLNE T2,770000 ;Done more than 6?
IDPB T1,T2 ;Store in next slot in P1
JRST GETNA1 ;Loop for more
GETNA2: ILDB T1,CMDB ;Get next char
SKIPN T1 ;Must be a break here
CPOPJ1: AOS (P) ;Give skip return
CPOPJ: POPJ P, ; and return
;Routine to check for a YES/NO response.
;Return+1 if no
;Return+2 if yes
YESNO: PUSHJ P,REDCMD ;Read in a line
ILDB T1,CMDB ;Get character
CAIE T1,"Y" ;Must be a YES
CAIN T1,"N" ; or a NO
JRST YESNO1 ;It is
OUTSTR [ASCIZ/
%Please respond with a Y or N: /]
JRST YESNO ; and loop
YESNO1: CAIN T1,"Y" ;If a Y,
AOS (P) ; we must give a skip return
POPJ P, ;Return
;Standard routine to print an octal number. Call with:
; T1/Number
;Return+1 always
PRTOCT: IDIVI T1,^D8 ;Divide by radix, remainder in T2
HRLM T2,0(P) ;Store remainder on stack
SKIPE T1 ;Done yet?
PUSHJ P,PRTOCT ;No, do next digit
HLRZ T1,0(P) ;Get next digit back from stack
ADDI T1,"0" ;Convert to ASCII
OUTCHR T1 ;Output it
POPJ P, ;Return to caller
;Routine to read a block from the disk into BUF. Call with
; T1/Block number to read
;Return+1 if errors detected
;Return+2 if no errors and block in BUF
REDBLK: MOVEM T1,LSTBLK ;Save for error messages
USETI DSK,T1 ;Setup to read that block
STATZ DSK,IO.ERR ;Any errors?
JRST IOERR ;Yes
INPUT DSK,DSKIOW ;Read the block
STATO DSK,IO.ERR ;Any errors?
JRST CPOPJ1 ;No, give skip
JRST IOERR ;Get status and return non-skip
;Routine to write a block from BUF to the disk. Call with:
; T1/Block number to write
;Return+1 if errors detected
;Return+2 if no errors and block written
WRTBLK: MOVEM T1,LSTBLK ;Save for messages
USETO DSK,T1 ;Setup to write specified block
STATZ DSK,IO.ERR ;Any errors?
JRST IOERR ;Yes
OUTPUT DSK,DSKIOW ;Do the output
STATO DSK,IO.ERR ;Any errors?
JRST CPOPJ1 ;No, give skip return
IOERR: GETSTS DSK,ERRSTS ;Get status for message
POPJ P, ;Give non-skip return
RELOC
CMDB: BLOCK 1 ;Command buffer byte pointer
CMDBUF: BLOCK <^D80/5>+2 ;Command buffer
LSTBLK: BLOCK 1 ;Last block read/written
ERRSTS: BLOCK 1 ;Status on last error
CRLF: ASCIZ/
/
DELBLK: SIXBIT/FE/ ;LOOKUP block for FE.SYS
SIXBIT/SYS/
EXP 0
XWD 1,4
PDL: BLOCK PDLLEN ;PDL
DSCBLK: BLOCK .DCUPN+1 ;DSKCHR block
DSKIOW: IOWD BLKSIZ,BUF ;IOWD to BUF
EXP 0
BUF: BLOCK BLKSIZ ;Buffer
END FEDEL