Google
 

Trailing-Edge - PDP-10 Archives - BB-F493Z-DD_1986 - 10,7/initia.mac
There are 10 other files named initia.mac in the archive. Click here to see a list.
SUBTTL	AUTHOR:P.CONKLIN /PMW/JNG/WLH/KPY/WCL/GMU/CDO/TARL
; OLD AUTHOR INITIALS:/RCC/DAL/PFC




;COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1970,1971,1972,1973,1974,1975,1976,1977,1978,1980,1982,1984,1985,1986. 
;ALL RIGHTS RESERVED.
;
;
;THIS SOFTWARE IS FURNISHED UNDER A LICENSE AND MAY BE USED AND COPIED
;ONLY  IN  ACCORDANCE  WITH  THE  TERMS  OF  SUCH LICENSE AND WITH THE
;INCLUSION OF THE ABOVE COPYRIGHT NOTICE.  THIS SOFTWARE OR ANY  OTHER
;COPIES THEREOF MAY NOT BE PROVIDED OR OTHERWISE MADE AVAILABLE TO ANY
;OTHER PERSON.  NO TITLE TO AND OWNERSHIP OF THE  SOFTWARE  IS  HEREBY
;TRANSFERRED.
;
;THE INFORMATION IN THIS SOFTWARE IS SUBJECT TO CHANGE WITHOUT  NOTICE
;AND  SHOULD  NOT  BE  CONSTRUED  AS A COMMITMENT BY DIGITAL EQUIPMENT
;CORPORATION.
;
;DIGITAL ASSUMES NO RESPONSIBILITY FOR THE USE OR RELIABILITY  OF  ITS
;SOFTWARE ON EQUIPMENT WHICH IS NOT SUPPLIED BY DIGITAL.


INTWHO==0		; LAST MODIFIER
INTVER==11		; MAJOR VERSION
INTMIN==0		; MINOR VERSION
INTEDT==254		; EDIT LEVEL

	SALL				; CLEAN ASSEMBLY LISTINGS

	SEARCH	JOBDAT,MACTEN,UUOSYM

	TITLE. (INT,INITIA,SYSTEM START-UP PROGRAM)
	INTTTL
	INTPTX

; JOB DATA AREA
	INT137

; SHOW VERSIONS OF UNIVERSAL FILES
	%%JOBD==%%JOBD			; SHOW VERSION OF JOBDAT
	%%MACT==%%MACT			; VERSION OF MACTEN
	.REQUEST  REL:HELPER		; USES HELPER [10(146)]

;ASSEMBLY INSTRUCTIONS:
;	.LOAD INITIA



;ASSEMBLY PARAMETERS

ND	L$PDL,40	;LENGTH OF PUSH-DOWN LIST
ND	L$TTBF,^D100	;SIZE OF TTY OUTPUT BUFFER IN WORDS
ND	N$HSGF,^D50	;NUMBER OF FILES WHICH CAN BE REMEMBERED
ND	N$STRS,^D36	;NUMBER OF STRUCTURES IN S/L (MAX)
ND	FLN$MX,^D200	;NUMBER OF CHARACTERS TO BUFFER TO FRCLIN
ND	FLO$MX,^D80	;MAXIMUM CHARS FOR PRE-7.03 MONITORS
ND	CTYHPQ,1	;HPQ TO RUN IN ON THE CTY
ND	NETSLP,^D5	;NETWORK SLEEP TIME IN FILCON
ND	TTWMAX,^D05	;.GT. 0 THEN FRCLIN INITIA STOMPS ON "OPEN" TTY LINES
			; WHERE "OPEN" := .GE. TTWMAX CHARS PER SECOND INPUT
ND	TTWSLP,^D60	;TIME TO SLEEP 'TWIXT SAMPLINGS
ND	LNTPAG,600	;START PAGE TO USE TO MAP IN LINTAB
ND	LDBPAG,640	;START PAGE TO USE TO MAP IN LDBS
ND	L$TERM,<<^D16+3>/4> ;LENGTH OF PORT ID STRING IN WORDS
ND	L$NNAM,<<^D16+3>/4> ;LENGTH OF NODE NAME STRING IN WORDS
L$SBLK==L$NNAM		;DEFAULT LENGTH FOR GENERIC STRING BLOCK
IFG <L$TERM-L$NNAM>,<L$SBLK==L$TERM> ;UNLESS THE PORT ID IS BIGGER
SUBTTL	TABLE OF CONTENTS

;               TABLE OF CONTENTS FOR INITIA
;
;
;                        SECTION                                   PAGE
;    1. TABLE OF CONTENTS.........................................   2
;    2. REVISION HISTORY..........................................   3
;    3. DEFINITIONS...............................................   6
;    4. INITIALIZATION............................................   8
;    5. CODE TO HANDLE SPECIAL STARTUP CONDITIONS.................  10
;    6. MAIN PROGRAM
;         6.1   HANDLE COMMAND SCANNING AND DISPATCH..............  12
;    7. HANDLE COMMAND LINE.......................................  16
;    8. SUBROUTINE TO IDENTIFY AND SAVE COMMAND...................  20
;    9. DEFINE SYSTEMS WHICH NEED SPECIAL SET-UP..................  21
;   10. SYSTEM TABLES.............................................  22
;   11. STANDARD COMMAND TABLES...................................  23
;   12. ROUTINES FOR VARIOUS COMMANDS.............................  25
;   13. NO COMMAND HANDLER........................................  25
;   14. RCV/XMT SPEED COMMAND HANDLER.............................  25
;   15. PAGE COMMAND HANDLER......................................  26
;   16. DIAL COMMAND HANDLER......................................  26
;   17. ROUTINE TO SETUP TTY......................................  27
;   18. ROUTINE TO SETUP TTY "TYPE"...............................  29
;   19. TTY CONTROL LIST ROUTINE..................................  30
;   20. ROUTINE TO KJOB IF SYSTEM GOING DOWN......................  31
;   21. SPECIAL PROCESSORS........................................  32
;   22. FILEX PROCESSOR...........................................  32
;   23. OMOUNT PROCESSOR..........................................  32
;   24. DAEMON PROCESSOR..........................................  32
;   25. CHKPNT PROCESSOR..........................................  32
;   26. OPSER PROCESSOR...........................................  32
;   27. PRINTR PROCESSOR..........................................  32
;   28. SYSDPY PROCESSOR..........................................  32
;   29. LOGIN TO 1,2 AND RUN CUSP NAMED IN T4.....................  33
;   30. START UP CUSP NAMED IN T2.................................  33
;   31. KILL JOB ROUTINE..........................................  34
;   32. SUBROUTINE TO LIST STRUCTURE NOTES........................  35
;   33. HELP ROUTINE..............................................  35
;   34. SUBROUTINES TO LIST SYSTEM,BATCH AND TEXT NOTICES.........  36
;   35. SUBROUTINE TO TYPE TTY SETTINGS...........................  38
;   36. ROUTINE TO TYPE PAGE:N OR NOPAGE..........................  39
;   37. ROUTINE TO FORMAT SPEED...................................  39
;   38. ROUTINE TO TYPE TYPE:XXXXXX...............................  39
;   39. ROUTINE TO FORMAT DECIMAL.................................  39
;   40. ROUTINE TO FORMAT BIT VALUES..............................  39
;   41. TTY SETUP PROCESSORS......................................  40
;   42. TERMINET ROUTINE..........................................  40
;   43. INPUT ROUTINES............................................  41
;   44. TABLE SEARCH ROUTINE......................................  41
;   45. SKIP TO VALUE ROUTINE.....................................  42
;   46. DECIMAL READ ROUTINE......................................  42
;   47. OCTAL READ ROUTINE........................................  42
;   48. SIXBIT NAME ROUTINE (GETSIX)..............................  43
;   49. TTY EXPANSION ROUTINE (XPNTTY)............................  44
;   50. CVTSIX....................................................  45
;   51. SIXBIT WORD ROUTINE (GETWRD)..............................  46
;   52. CHARACTER ROUTINE (GETCHA)................................  47
;   53. SUBROUTINE TO READ FROM COMMAND TTY.......................  47
;   54. COMMAND LINE PROCESSOR....................................  48
;   55. SUBROUTINE TO TYPE CONTENTS OF FILE.......................  48
;   56. SUBROUTINE TO READ FROM FILE..............................  54
;   57. SUBROUTINES...............................................  55
;   58. SUBROUTINE TO LOGIN A JOB.................................  55
;   59. SUBROUTINE TO TYPE SIGN ON MESSAGE........................  60
;   60. SUBROUTINE TO TYPE KSYS MESSAGE...........................  62
;   61. ERROR HANDLERS............................................  63
;   62. TYPEOUT ROUTINES..........................................  63
;   63. GTNTN. ROUTINE............................................  66
;   64. SPECIAL TTY SETUP SEQUENCES...............................  66
;   65. STORAGE AREA..............................................  67
SUBTTL	REVISION HISTORY

;%3	OCT, 71

;40	UPDATE DEC APR TABLES
;41	(10-11146) CORRECT FILEX PPN
;42	CONVERT TO C AND MAKE REENTRANT
;43	ADD APR S/N TO SIGNON MESSAGE
;44	HANDLE CASE OF .HELLO (TTY DATASET ANSWER)
;45	CHANGE TERMINET OPTION TO COMMAND LINE
;46	ADD STRUCTURE COMMAND TO COMMAND LINE
;47	LOOK AT FILE SYS:TTY.INI. LINES ARE ALL, OTHER, TTYX,TTYX-Y
;50	ADD ALL TRMOP'S FROM TTY.INI
;51	ADD HELP
;52	ADD KSYS OPTION
;53	ADD JOB # AND USER NAME IF LOGGED IN
;54	ADD ".LOGIN A,B" WHEN LOGGING IN
;55	ADD NOTICE OPTION
;56	ADD TTY OPTION
;57	GET REAL S/L IF POSSIBLE
;60	IMPLEMENT DIAL OPTION
;61	ALLOW CONTINUATION IN FILE TTY.INI AND COMMENTS ON
;	ALL COMMANDS
;62	ENSURE . IS ALWAYS TYPED JUST ONCE AT EXIT
;63	USE C AS A UNIVERSAL
;64	ADD NONAME
;65	ADD NORUN
;66	ADD NOSETTTY
;67	IF LOGGED IN, ALSO USE SWITCH.INI
;70	ALLOW TT: FOR TTY:
;71	DEFAULT TO NOSETTTY IF LOGGED IN
;72	SEPARATE USER SETTABLE TTY STUFF IN TTY TYPEOUT
;73	FIX BUGS REPORTED IN QAR-1563 (WPI)
;74	ALLOW () IN .INI OPTIONS
;%4(74)	JUNE, 1974
;75	HAVE INITIA REMEMBER TTY.INI AND STR.TXT IN HISEG
;76	CHANGE ALL OUTCHR UUO'S TO SUBROUTINE CALLS AND DO
;	BUFFERED TTY OUTPUT FOR SPEED
;77	ADD RTCOMPAT TO LIST OF TTY SWITCHES
;100	USE NON-BLOCKING TTY I/O TO AVOID GETTING HUNG IN 'TO'
;	STATE.
;101	(10-13,784) GET JOB NUMBER CORRECTLY IF JOBSTS FAILS
;102	(10-13,784) ADD OPTION FOR DAEMON
;103	OUTPUT "OR ATTACH" ONLY IF SOME DETACHED JOBS
;104	(SER 922) DON'T PRINT SPEED:0
;105	(10-13,595) REMOVE INICER MESSAGE ON NULL COMMAND
;106	(10-14,000) FIX BUG WHICH MISSED OTHER IN SWITCH.INI
;107	SUPPRESS "PLEASE LOGIN" IF SCHED 7
;110	(CER S70-725) WHEN LISTING USER NAME, ALSO GIVE PPN
;111	HANDLE UP TO 36 STRS IN S/L
;112	SET DEFAULT PHY & VIRT LIMITS TO 1000P
;113	REMOVE KSYS CALL OF KJOB (OPSER 5A DOES IT)
;114	DON'T LOGIN [1,2] UNLESS LOCAL TERMINAL
;115	PREVENT LOOP IF UNMATCHED '(' IN TTY.INI OR SWITCH.INI
;116	IMPLEMENT BATCH KEYWORD
;117	FIX HILOOK BUG
;120	IMPLEMENT TEXT KEYWORD
;121	BE SUSPICIOUS OF DEAD HI-SEG INTERLOCKS -- SLOWS SYS START UP
;122	ADD SYSV52 AND SYSV61 [TTY.INI COMMANDS--SYSVFT AND SYSVSO]
;123	FIX PROBLEM WITH CORE UUO FAILURE
;124	DON'T GIVE ALL PRIVILEGES TO REMOTE OPR
;125	UNKNOWN.
;126    CHANGES  TO  IMPLEMENT  'DETECT  XXXX'   FOR   SPEED
;       DEPENDENT SETUP OF DIAL-UP LINES, 'LINSPD' FOR LINES
;       RUNNING AT SPECIFIED BAUD, AND  'OTHSPD'  FOR  LINES
;       NOT AT THE SPECIFIED BAUD.
;127	ADD NETWORK CAPABILITIES FOR DIRECT ACCESS TO PHYSICAL TTY'S
;130	MERGE EDITS 126-127.
;131-132 CLEAN UP LISTING.
;133	CLEAR EOF BIT BEFORE READING ACCOUNTING FILE.
;134	FIX BUG IN NTKSYS ROUTINE..USED WRONG
;	UUO TO GET STATION STATUS.
;135	FIX BUG THAT SETUP NETWORK LINES IMPROPERLY.
;136	INSTALL CONTROL-C INTERCEPT SO HIGH SEGMENT DOESN'T
;	GET LEFT IN AN INTERLOCKED STATE.
;137	DON'T TYPE NETWORK STUFF UNLESS WERE ON A NODE,
;	QAR#631.
;	FIX CTY BUG IN XPNTTY ROUTINE.
;	USE TITLE. MACRO FROM MODUNV.UNV.
;140	MINOR FIXUPS...QAR'S 10-00671 & 10-00681
;141	MAKE SURE THAT NO LINE, LOCAL OPR OR NOT, GETS TO
;	BE A REMOTE OPR, IF IT'S ON NODE 0.
;142	1) EDIT 136 ALLOWS CONTROL-C INTERCEPT TO HAPPEN FOR ALL
;	JOBS RUNNING AT SYSTEM STARTUP TIME....DON'T DO THAT.
;	TURN THE INTERCEPT OFF AGAIN AS SOON AS WE FIND OUT
;	THAT WE'RE GOING TO WAIT FOR SOMEONE ELSE TO DO THE
;	DIRTY WORK!
;	2) PURGE REMOTE STATION STUFF..RUNNING OF REMLOD ETC.
;	AND CHANGE CODE FOR CENTRAL OPR TO GET CENTRAL OPR AND
;	NOT LOCAL OPR.
;143	CLEAN UP LISTING. REMOVE VRSN. MACRO.
;144	FIX FAULTY COMPARE AT NOTFND ROUTINE. CAUSED REMOTE
;	STATION OPR TERMINAL NOT TO COME UP.
;145	MAKE 144 WORK. CHANGE TO VERSION 7 FOR DISTRIBUTION.
;	CHANGE KEYWORD "BLANK" TO "BLANKS" IN STANDARD COMMAND TABLES.
;146	1) FIX TO HANDLE TTY0 AT CENTRAL SITE.
;	2) GET HELPER.REL FROM REL: RATHER THAN DSK:  IN ".REQUEST"
;	   PSEUDO-OP.
;	3) ELIMINATE REFERENCE TO MODUNV.UNV FILE.
;	   MACROS DEFINED IN MACTEN.UNV.
;147	(WEM) MAKE 'TTY.INI' AND 'AUXACC.SYS' LOOKUPS PHYSICAL
;	      ONLY.
;150	(WEM) MAKE INITIA USE THE HIBER AND WAKE UUO'S IN ORDER
;	      TO LESSEN THE AMOUNT OF TIME IT SPENDS WAITING ON
;	      THE HIGH-SEGMENT INTERLOCK.
;151	(KPY) FIX SOME BUGS INTRODUCED WITH EDIT 150
;	      AND REMOVE SOME EXTRANEOUS CODE.
;152    MAKE IT SKIP TABS PRECEDING COMMAND
;153    INCLUDE SKIPPING OF TABS WITHIN COMMAND LINE
;154    FIX RESCANNING OF COMMENT AT END OF LINE
;155	REMOVE CHECK IF TTY# EQUALS PHYSICAL LINE #
;	(HISTORICAL REASONS ONLY) THUS PRINT MESSAGE
;	"CONNECTED TO NODE" IN ANY CASE.
;156	ADD CODING FOR SETTING/REPORTING TERMINAL TYPE
;157	MAKE TERMINAL TYPE COMPATIBLE WITH "NO" CONSTRUCTION
;160	MORE ON "NO" CONSTRUCTION FOR TERMINAL TYPE
;161	MAKE TERMINAL TYPE SETTING SAME AS OTHER TTY SETUP FEATURES
;162	MAKE CHANGE FOR NEW TRMOP. WHICH RETURNS TERMINAL TYPE
;	IN SIXBIT
;163	ADD LOCATE:NN COMMAND WHICH WILL LOCATE USER TO NODE
;	SPECIFIED.  OR IN THE ABSENCE OF A LOCATE COMMAND, LOCATE TO
;	THE CENTRAL SITE IF HE IS BEING LOGGED IN ON A NODE WITHOUT
;	AN LPT
;164	CHANGE ORDER OF TRMOP.S,  DO TYPE BEFORE PAGESIZE
;	(IN DOTTYT: .TOTRM BEFORE .TOPSZ)
;165	ON A FORCED RUN OF INITIA AT SYSTEM STARTUP, ONLY ONE COPY OF
;	INITIA WAS RUNNING AT A TIME.  THIS IS ONLY NEEDED WHEN THE
;	FIRST ONE TO RUN IS READING THE FILES INTO THE HIGH SEG.
;	AFTER THIS IS DONE, ALLOW ALL OTHER COPIES TO RUN CONCURRENTLY.
;	ALSO DO SOME PERFORMANCE WORK TO MAKE INITIA RUN FASTER AT
;	SYSTEM STARTUP.
;166	ADD GALOPR COMMAND IN TTY.INI TO GIVE CCL RUN TO GALAXY OPR
;167	PUSH THE CONTENTS OF SYS:SYSJOB.INI DOWN FRCLIN DURING SYSTEM STARTUP
;170	DO SETUUO TO SETUP OPR PRIVILEGES BEFORE LOGGING IN
;	SET ONLY REMOTE OPR PRIV IF LOGGING IN A REMOTE OPR
;171	MORE OF EDIT 165
;172	RE-FORMAT OUTPUT OF TTY CHARACTERISTICS
;173	FIX BUG WHICH ALLOWED "INITIA SETTTY NO REMOTE" IN SWITCH.INI
;	TO ACTUALLY SET THE LINE NO REMOTE
;174	ACCEPT "DEFER" IN TTY.INI/SWITCH.INI FOR DEFERED ECHOING
;	REPORT SAME IN TYPTTY.
;**** SHIPPED WITH 701
;**** START VERSION 10
;175	SPR #30106	BCM	10-DEC-80
;	DETACH FROM FRCLIN SO COMMANDS CAN START TO BE PROCESSED
;176	SPR #30351	RKB	31-DEC-80
;	THE CODE AROUND FILE.1 WAS NOT READING SYS:TTY.INI PROPERLY FOR
;	NODES NAMED "OTHER", "DETECT", "LINSPD", OR "OTHSPD".
;177	NO SPR		RDH	14-JAN-81
;	ADD "CONNECT" PSEUDO-COMMAND TO TTY.INI
;200	NO SPR		RDH	20-JAN-81
;	IF TTWMAX .GT. 0 THEN HAVE FRCLIN INITIA HANG AROUND AND WATCH FOR
;	TTY LINES RUNNING OPEN AND STOMP ON 'EM
;201	SPR #30510	BCM	16-Apr-81
;	REMOVE OBSOLETE "BATCH" OPTION SINCE MPB IS GONE
;	ALSO CHANGE THE OPR PRIV. SINCE UUOSYM CHANGED
;202	SPR #30875	BCM	16-Apr-81
;	IF SYSJOB.INI DOES NOT EXIST, DIE GRACEFULLY
;203	NO SPR		TARL	21-apr-81
;	MORE EDIT 200. MAKE INITIA ASSIGN THE OPEN LINES, SO THEY WON'T
;	WAKE UP AGAIN WHEN THE -11 SENDS THE DISCONNECT MESSAGE. ALSO
;	LOG INITIA IN, SO IT LOOKS LESS LIKE A MUNCHING PROGRAM AND
;	DOESNT GET CAUGHT BY KILL DOING A 'ZAP *'
;204	NO SPR	TARL	23-Jul-81
;	ADD XONXOFF TO LIST OF CHARACTERISTICS DISPLAYED ON .I TTY
;	[KEEP WSM HAPPY]
;205	NO SPR	TARL	8-Aug-81
;	CHANGE INPUT BUFFER CHECK IN FRCLIN PROCESSING FROM .TOSIP TO
;	A .TOTTC, SINCE A .TOSIP WILL MAKE RESCANS FROM FRCLIN FAIL.
;206	NO SPR TARL 9-Aug-81
;	MORE EDIT 200. CLEAN UP SOME EDIT 203, AND GIVE MORE INFORMATIVE
;	MESSAGES WHEN WE STOMP ON A LINE
;207	NO SPR TARL 18-oct-81
;	CLEAN UP CLEAN UP PROCEDURES FOR TTY STOMPER.
;210	NO SPR TARL 19-jan-82
;	MAKE TTY STOMPER GIVE SIXBIT LOGICAL NAMES TO THE TTYS IT OPENS.
;211	NO SPR TARL 16-Feb-82
;	FIX STACK SKEW PROBLEM WITH EDIT 206
;212	NO SPR TARL 24-aug-82
;	GIVE AN ERROR (TNF) IF SYS:TTY.INI CAN'T BE FOUND.
;213	NO SPR TARL 24-aug-82
;	MAKE TTY STOMPER SET IT'S PROGRAM NAME TO SOMETHING RECOGNIZABLE
;	AND FINDABLE BY WHO: "STOMPR". ALSO DO CLRBFI'S ON ALL TTY LINES
;	THAT HAVE ANY CHARACTERS IN THEIR INPUT BUFFERS.
;214	NO SPR Tarl 11-Apr-83
;	ASSORTED CLEANUPS.
;	  ALLOW TURNING OFF TTY STOMPER (MISSING ANGLE BRACKET)
;	  ALLOCATE ONLY ENOUGH ENTRIES FOR REAL TTYS (LH %CNPTY) IN STOMPER
;		TABLES.
;	  MAKE MESSAGES FROM STOMPER SAY "%%TTY STOMPER -". RESERVE THE HEADING
;		"%%FRCLIN INITIA" TO ITS FRCLIN STAGE.
;	  MAKE STOMPR LESS VICIOUS. IF A TERMINAL IS BUSY, MERELY FLAG THE FACT
;		AND DON'T GET CHARACTER COUNTS. WE'LL GET THEM WHEN TTY IS FREE.
;	  MAKE STOMPR FASTER. MAP IN LINTAB AND LDBS, SO WE CAN CHECK FAST IF
;		TTY IS BUSY. IF NO DDB, WE GO THROUGH NORMAL ALGORITHM.
;215	NO SPR Tarl 25-Apr-83
;	MORE 214. ALLOW TURNING OFF TTY STOMPER AGAIN. MAKE SURE INITIA GOES
;	AWAY IF HE DECIDES TO LOG OUT.
;216	QAR 125089 Tarl 25-Apr-83
;	MAKE THE STOMPR FUNCTION DEPENDANT ON THE "STOMP" KEYWORD BEING
;	PRESENT IN TTY.INI. ALSO MAKE "STOMP" INLINE COMMAND WORK VIA
;	JUMPPR, SO THAT WE ARE APPROPRIATLEY CLEANED UP.
;	NOTE THAT IT IS NO LONGER NECESSARY TO TURN OFF STOMPR VIA TTWMAX,
;	YOU CAN MERELY NOT INCLUDE THE STOMP COMMAND IN TTY.INI
;217	QAR 125113 Tarl 25-Apr-83
;	MAKE INITIA RUN THE RIGHT VERSION OF SYSDPY DEPENDING ON WHAT TERMINAL
;	TYPE YOU ARE. ALL SYSDPY KEYWORDS NOW DISPATCH TO THE SAME LOCATION,
;	WHICH WILL DETERMINE TERMINAL TYPE, AND THEN RUN A VERSION OF SYSDPY.
;
;	CUSTOMERS: TO ADD TERMINAL TYPES, LOOK AT "DPYNAM" MACRO.
;
;220	QAR        Tarl 22-May-83
;	KEEP IT RUNNABLE ON KI'S. CHANGE ADJSP TO POP P,(P)
;
;CLOSE HERE FOR 7.02 SHIP.
;221	QAR 125818	SMW 22-Feb-84
;	FRCLIN SHOULD NOT SET CUSTOMER PRIV BITS.
;
;222	SPR 34526	TARL 22-Feb-84
;	DON'T THINK TTY0 OF AN MCR IS A REMOTE OPR. HE ISN'T.
;
;223	SPR 35019	DRB 05-Dec-84
;	ALLOW LEADING SPACES ON DECIMAL ARGUMENTS IN TTY.INI.
;
;224	SPR 34181	DRB 14-Dec-84
;	GUARD AGAINST SPURIOUS WAKES WHILE WAITING FOR TERMINAL OUTPUT
;	TO COMPLETE AT TTYP.1.
;
;225	NO SPR		DRB 03-Jan-85
;	THE STARTUP CODE IS ZEROING ONE TOO MANY WORDS OF LOW SEGMENT.
;	DON'T DO THAT.
;
;226	NO SPR		DRB 03-Jan-85
;	CHANGE HOW SYSJOB.INI WORKS:  THE .TOTYP TRMOP. WILL NOW SEND THE
;	ENTIRE STRING IT'S GIVEN IN A FASHION THAT MAKES ANY RACE CONDITION
;	IMPOSSIBLE.  SEND ALL TEXT IN SYSJOB.INI THAT OCCURS BETWEEN LOGIN
;	COMMANDS AS A SINGLE STRING TO .TOTYP, SO THERE IS NO THREAT OF A RACE
;	CONDITION ON THE FRCLIN COMMAND EXECUTION.  FOR EXAMPLE:
;		...
;		LOG
;		BATCON
;		LOG
;		LPTSPL
;		LOG
;		...
;	WILL SEND "LOG<CR>BATCON<CR>" AS A SINGLE STRING,
;	THEN "LOG<CR>LPTSPL<CR>"
;
;227	NO SPR		DRB 04-Jan-85
;	REMOVE TO CODE TO READ THE SEARCH LIST FOM AUXACC.SYS, NOW THAT
;	ACTDAE IS IN CHARGE OF THESE THINGS.  SINCE WE'RE HERE TO LOG THINGS
;	IN BEFORE ACTDAE IS AROUND, WE CAN'T COUNT ON ACTDAE TELLING US
;	EITHER, SO WE'LL JUST HAVE TO GO WITH THE SYS SEARCH LIST.
;
;230	NO SPR		DRB 17-Jan-85
;	ADD NEW "EIGHTBIT", "ESCAPE", "QUOTE", "IDLEDISC" AND "UNPAUSE"
;	TERMINAL PARAMETERS TO TTY.INI.  THIS ALSO IMPLEMENTS GCHVAL WHICH
;	READS CHARACTER VALUE ARGUMENTS TO "ESCAPE" AND "UNPAUSE".
;
;231	NO SPR		DRB 21-Jan-85
;	MAKE THE TTY STOMPER LOOK IN THE CORRECT SECTION FOR THE LDBS.
;
;232	NO SPR		DRB 21-Jan-85
;	DON'T TYPE ANYTHING ON A LINE WE MAY HAVE JUST SLAVED.
;
;233	NO SPR		DRB 25-Jan-85
;	ADD VT220 AND VT240 TO THE TABLE OF TERMINAL TYPES FOR SYSDPY.
;
;234	NO SPR		DRB 12-Feb-85
;	LENGTHEN THE STACK TO ACCOMODATE THE NEW HELPER.
;
;235	NO SPR		DRB 19-Feb-1985
;	USE %CNPRV TO SET THE PRIVILEGE WORD FOR JOBS WE LOG IN.
;
;236	10-35151	DRB 28-MAR-85
;	ADD THE "ACCOUNT" ARGUMENT FOR TTY.INI TO BE APPLIED TO JOBS WE'RE
;	LOGGING IN.  CREATE A NEW "FRCLIN" TTY SPECIFIER TO MEAN THE
;	FRCLIN JOB.  ALLOW THIS ARGUMENT ON THE "STOMP" COMMAND AS WELL.
;
;237	QAR 868003	DRB 1-Apr-85
;	ALLOW TERMINAL SPECIFIERS OF THE FORM NODE_NN AS WELL AS NODE_TTYNN
;	AS DOCUMENTED IN THE SOFTWARE INSTALLATION GUIDE.
;
;240	NO SPR		DRB 8-Apr-85
;	DON'T TYPE ANYTHING ON DIALUPS THAT AREN'T DIALED INTO.  REWORK THE
;	CODE FOR NOT TYPING ON SLAVED LINES SO THAT SYSDPY CAN STILL BE RUN.
;
;241	NO SPR		DRB 16-Apr-85
;	DON'T SAY "NOESCAPE" OR "NOUNPAUSE" WHEN THE RESPECTIVE CHARACTER IS
;	ZERO.  JUST USE THE "NO" PREFIX WHEN THE CHARACTER HAS ITS DEFAULT
;	VALUE.
;
;242	QAR868121	DRB 31-May-85
;	NOSLAVE CAUSES THE OUTPUT TO BE SUPPRESSED 'CAUSE WE'RE CHECKING THE
;	WRONG THING.  FIX IT.
;
;243	NO SPR		DRB 07-Aug-85
;	SET PHYSICAL AND VIRTUAL PAGE LIMITS TO 512 (EACH) WHEN LOGGING IN A
;	JOB.
;
;244	NO SPR		LEO  12-Aug-85
;	DO COPYRIGHTS.
;
;245	NO SPR		DRB 03-Sep-85
;	ASSIGN LARGE PID QUOTAS FOR JOBS WE RUN OPR ON.
;
;246	QAR868260	DRB 09-Sep-85
;	RE-IMPLEMENT DOWNWARD COMPATIBILITY WITH OLDER (PRE 7.03) MONITORS.
;
;247	NO SPR		DRB 17-Sep-85
;	LEARN ABOUT LAT AND DECNET TERMINALS.  (READ TTY.INI, ETC)
;
;250	NO SPR		DRB 30-Sep-85
;	EDIT 245 ISN'T WORKING 'CAUSE WE'RE TRYING TO SET THE QUOTAS BEFORE
;	THE JOB IS LOGGED IN.  DON'T ATTEMPT TO SET THE IPCF QUOTAS UNTIL
;	THE LOGIN UUO HAS BEEN CALLED.
;
;251	NO SPR		DRB 1-Oct-85
;	TYPE "LINE " INSTEAD OF "LINE # " IF WE'RE DISPLAYING A LAT PORT ID
;	INSTEAD OF AN ANF-10 OR CTERM TERMINAL NUMBER.
;
;252	QAR868358	DRB 18-Oct-85
;	WHEN USING REMEMBERED FILES IN THE HIGH SEGMENT, LOOKUP THE REAL FILE
;	AND COMPARE THE CREATION DATE WITH THE REMEMBERED COPY TO MAKE SURE
;	THE REAL FILE HASN'T CHANGED.  THIS SHOULDN'T CAUSE MUCH OF A 
;	PERFORMANCE PROBLEM AT STARTUP, AS ALL THAT INFORMATION SHOULD BE
;	LAYING ABOUT IN THE MONITOR'S DATABASE AND DISK CACHE.
;
;253	NO SPR		DRB 18-Oct-85
;	EXPAND THE LOGGED IN JOB'S CORE LIMITS TO 32 SECTIONS INSTEAD OF
;	JUST 511 PAGES.
;
;254	10-35378	DRB 14-Nov-85
;	THE TTY STOMPER IS ZERO BAUDING LINES TOO SOON, AS IT HAS THE MISTAKEN
;	IMPRESSION THAT IT CAN ZERO THE LINE'S INPUT CHARACTER COUNT.  DON'T
;	TRY TO DO THIS, AND JUST USE THE PREVIOUS SAVED CHARACTER COUNT FOR
;	COMPARISONS.
;
;END OF EDIT HISTORY
SUBTTL	DEFINITIONS

;AC NAMES

F=0	;FLAGS
T1=1	;TEMPORARIES
T2=2
T3=3
T4=4
T5=5
T6=6
T7=7
T8=10
I=11	;INDEX INTO HISEG TABLES
OC=12	;TEMP FOR TTYSTR LUUO

WD=13	;LAST INPUT WORD
CH=14	;LAST INPUT CHARACTER
BP=15	;BOMB OUT PC
ME=16	;TTY NAME OF THIS TTY
P=17	;PUSHJ-DOWN LIST POINTER


;INPUT/OUTPUT CHANNELS

IO==0	;USED FOR TEMP FILES
TI==1	;TTY.INI
TTY==2	;TTY OUTPUT
TTZ==3	;FOR USE CHECKING IN FILCON
;FLAG BITS

F.LOGI==1B0		;LOGGED IN
F.LOGX==1B1		;OK IF ALREADY LOGGED IN
F.CCL==1B2		;FORCE CCL STARTING POINT
F.NOHD==1B3		;SUPPRESS HEADER TYPEOUT
F.PRIV==1B4		;GIVE JOB ALL PRIVILEGES
F.CCLC==1B5		;CALLED FROM CCL MODE
F.REMO==1B6		;REMOTE OPR
F.IPCQ==1B7		;GIVE JOB BIG IPCF QUOTAS
F.ANSW==1B8		;JUST ANSWERED TTY MODEM
F.ICMD==1B9		;INITIA COMMAND
F.ECMD==1B10		;END OF COMMAND LINE
F.EOF==1B11		;END OF FILE
F.NO==1B12		;NO XXX
F.CERR==1B13		;COMMAND ERROR
F.BIN==1B14		;READ IN BINARY
F.ALIN==1B15		;SOME LINE FOUND IN TTY.INI
F.RTTY==1B16		;RESCANNED TTY, BUT NOT REEATEN ALL YET
F.TSOL==1B17		;TYPED SOMETHING ON THIS LINE

F.PARN==1B18		;PAREN LIST OF TTYS
F.PHYS==1B19		;RUN JOB VIA PHYSICAL RUN
F.NJBS==1B20		;SET IF NO JOBSTS UUO
F.CTY==1B21		;RUNNING ON CTY
F.FLN==1B22		;RUNNING ON FRCLIN
F.OLD==1B23		;RUNNING ON PRE-7.03 SYSTEM
F.ANFL==1B24		;RUNNING ON AN ANF-10 LINE (NOT DECNET, LAT)
F.DCNL==1B25		;RUNNING ON A DECNET (POSSIBLY CTERM) LINE
F.NODL==1B26		;SET IF LIST OF NODE_ID (INSTEAD OF NODE_(..))
F.QUOT==1B27		;SET IF LAST ASCII STRING READ WAS QUOTED


;USEFUL OPDEFS

OPDEF	BOMB$	[JSP BP,E$$BMB]	;DEBUGGING AID--PERMANENT FEATURE

;FOR LUUOS, IF AC1 IS ON, POPJ AFTER DOING LUUO

OPDEF	TTYCHR	[1B8]	;IMMEDIATE MODE OUTCHR LUUO
OPDEF	TTYSTR	[2B8]	;OUTSTR LUUO

OPDEF	CTYSTR	[3B8]	;OUTSTR TO THE CTY
OPDEF	CTYCHR	[4B8]	;OUTCHR TO THE CTY



	TWOSEG
	RELOC	400000


COPYRIGHT (c) DIGITAL EQUIPMENT CORPORATION 1970,1986. ALL RIGHTS RESERVED.
\;END COPYRIGHT MACRO


SUBTTL	INITIALIZATION

INITIA:	TDZA	F,F		;ALLOW FOR CCL ENTRY
	MOVX	F,F.NOHD!F.CCLC	;IF CCL CALL, SUPPRESS HEADER
	RESET			;CLEAR THE WORLD
	SETZB	1,ZER		;CLEAR OUT STORAGE
	MOVE	P,[ZER,,ZER+1]
	BLT	P,EZER-1
	MOVE	P,[1,,2]
	BLT	P,P
	MOVE	P,[IOWD L$PDL,PDL]  ;INITIALIZE PUSH-DOWN LIST
	MOVEI	T1,L$SBLK+.NSAST ;GET THE LENGTH OF OUR GENERIC STRING BLOCK
	MOVEM	T1,STR8BK	;SETUP THE WORD COUNT HALFWORD
IFN <L$SBLK-L$TERM>,MOVEI T1,L$TERM+.NSAST ;GET THE LENGTH OF A TERMINAL STRING BLOCK
	MOVEM	T1,MYTERM	;SETUP THE WORD COUNT
IFN <L$TERM-L$NNAM>,MOVEI T1,L$NNAM+.NSAST ;GET THE LENGTH OF A NODE NAME BLOCK
	MOVEM	T1,MYNODE	;SETUP THE WORD COUNT
	MOVEM	T1,MYNUMB	;  OF BOTH TYPES OF NODE NAMES

;NOW FIND SOME INITIAL SYSTEM VALUES

	MOVX	T1,%LDFFA	;GET [1,2]
	GETTAB	T1,		;PPN
	  MOVE	T1,[1,,2]	;(DEFAULT)
	MOVEM	T1,FFAPPN	;SAVE FOR LATER

	MOVX	T1,%LDSYS	;GET SYS:
	GETTAB	T1,		; PPN
	  MOVE	T1,[1,,4]	;(DEFAULT)
	MOVEM	T1,SYSPPN	;SAVE FOR LATER

	MOVX	T1,%CNFLN	;FRCLIN GETTAB INDEX
	GETTAB	T1,		;GET FRCLIN TTY LINE NUMBER
	 SETO	T1,		;OOPS - NO SUCH BEAST
	TXO	T1,.UXTRM	;FAKE IT INTO A UDX
	MOVEM	T1,FLNNUM	;REMEMBER FRCLIN NUMBER

	GETPPN	T1,		;GET THIS JOB'S PPN
	  JFCL			;(IN CASE OF JACCT)
	MOVEM	T1,MYPPN	;SAVE FOR LATER USE
	PJOB	T1,		;GET THIS JOB NUMBER
	MOVEM	T1,JOBN		;REMEMBER IT
	MOVN	T2,T1		;NEGATIVE JOB NUMBER FOR JOBSTS TO
	JOBSTS	T2,		;GET THIS JOB'S STATUS
	  JRST	[TXO   	F,F.NJBS	;INDICATE JOBSTS FAILED
		MOVX   T2,%LDHLP	;CAN'T TELL--GET
		GETTAB T2,		;HELP PPN (UNLOGGED JOB)
		  MOVE T2,[2,,5]	; FROM SYSTEM
		CAME   T2,MYPPN		;SEE IF SAME
		TXO    F,F.LOGI		;NO--MUST BE LOGGED IN
		JRST   .+1]		;AND PROCEED
	TXNE	T2,JB.ULI	;SEE IF LOGGED IN YET
	TXO	F,F.LOGI	;YES. REMEMBER THAT

;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE

	MOVX	T1,%CNDVN	;GET THE MONITOR'S
	GETTAB	T1,		;  VERSION NUMBER
	 SETZ	T1,		;ASSUME NO VERSION?
	ANDX	T1,VR.VER	;MASK DOWN TO THE MAJOR VERSION NUMBER
	CAMGE	T1,[INSVL.(703,VR.VER)] ;IS IT A GOOD VERSION NUMBER?
	TXO	F,F.OLD		;NO, OLD MONITOR
	MOVE	T3,FFAPPN	;GET FULL-FILE-ACCESS (OPR) PPN
	SETOM	T1		;-1 := PROGRAM'S CONTROLLING TTY
	GETLCH	T1		;GET OUR LINE CHARACTERISTICS
	HRRZ	T2,T1		;COPY OF JUST LINE INDEX
	MOVEM	T2,TERNUM	;REMEMBER TERMINAL UDX
	CAMN	T2,FLNNUM	;RUNNING ON FRCLIN?
	TXO	F,F.FLN		;YES, NOTE THAT FACT
	TXNE	F,F.FLN		;RUNNING ON FRCLIN?
	JRST	INITI2		;YES
	TXNN	T1,GL.CTY	;ON THE CTY?
	JRST	INITI4		;NO
	TXNE	F,F.LOGI	;ARE WE LOGGED IN?
	CAMN	T3,MYPPN	;YES, AS OPR?
	TXOA	F,F.CTY		;NOT LOGGED IN OR LOGGED IN AS OPR
	JRST	INITI4		;LOGGED IN AS RANDOM USER, NO CTY-SPECIAL
INITI2:	TXNN	F,F.LOGI	;ALREADY LOGGED IN?
	CHGPPN	T3,		;NO, REALLY WANT PRIVILEGES (FOR HPQ OR FRCUUO)
	 JFCL			;OH WELL, BLUNDER ONWARDS
IFG CTYHPQ,<			;IF WANT TO RUN IN HPQ
	MOVEI	T3,CTYHPQ	;SELECT DESIRED HPQ
	HPQ	T3,		;AND ASK MONITOR FOR PREFERENTIAL TREATMENT
	 JFCL			;HOHUM
> ;END IFG CTYHPQ

INITI4:	OPEN	TTY,[UU.AIO+.IOASC
		     SIXBIT /TTY/
		     XWD TTYOBF,0]
	  JRST	LOGOF$		;CAN NOT FIX THIS
	MOVE	T1,[BF.VBR+TTYBUF+1] ;SETUP BUFFER HEADER
	MOVEM	T1,TTYOBF	; TO POINT TO OUR
	MOVE	T1,[POINT 7,0,35] ; OVERSIZED TTY
	MOVEM	T1,TTYPNT	; BUFFER
	MOVE	T1,[L$TTBF+1,,TTYBUF+1]
	MOVEM	T1,TTYBUF+1	;STORE POINTER IN BUFFER
	MOVE	T1,[PUSHJ P,LUUO] ;SET UP LOCATION 41
	MOVEM	T1,.JB41

;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE

	MOVSI	T1,'CTY'	; GET NODE,LINE FOR CENTRAL STATION
	PUSHJ	P,GTNTN$
	HRRZM	T1,NL.CTY
	IORI	T1,.UXTRM	;MAKE INTO A UDX
	HRRZM	T1,CTYNUM	;REMEMBER UDX FOR THE CTY

; NOW GET THE SIXBIT TTY NAME FOR THE CTY

	TLZ	T1,-1		; CLEAR OUT THE NODE
	PUSHJ	P,CVTSIX	; CONVERT TO SIXBIT
	LSH	T1,-^D18	; SHIFT NUMBER INTO RIGHT HALF
	HRLI	T1,'TTY'	; PLANT TTY
	MOVEM	T1,CTYTTY	; AND STORE AWAY FOR LATER

	MOVE	T1,['OPR0  ']	; GET NODE,LINE FOR CENTRAL OPR
	PUSHJ	P,GTNTN$
	MOVEM	T1,NL.OPR

	GETLIN	ME,0
	MOVE	WD,ME		; COPY THE TERMINAL NAME
	PUSHJ	P,XPNTTY	; EXPAND THE TERMINAL NUMBER
	MOVEM	WD,TRMNAM	; SAVE IT FOR LATER
	MOVE	T1,ME
	PUSHJ	P,GTNTN$
	MOVEM	T1,NL.ME
	TLZ	T1,-1		; GET RID OF THE NODE NUMBER
	PUSHJ	P,CVTSIX	; CONVERT TO A SIXBIT NUMBER
	HRRI	T1,'TTY'	; FILL IN THE OTHER HALF WITH A NAME
	MOVS	WD,T1		; COPY THE TERMINAL NAME
	PUSHJ	P,XPNTTY	; EXPAND THE NAME
	MOVEM	WD,TRMNNM	; SAVE THE NODE RELATIVE FLAVOR

	MOVE	T1,[.NOPNM+1,,.NOGDI] ; GET OUR NETOP. FUNCTION CODE AND ARG LENGTH
	MOVEM	T1,NOPBLK+.NOFCN;  TO READ THE TERMINAL INFO
	MOVEM	ME,NOPBLK+.NODEV; STORE THE DEVICE NAME
	MOVEI	T1,MYNODE	; GET STORAGE FOR THE NODE NAME STRING
	MOVEM	T1,NOPBLK+.NONOD; AND STORE IN THE NETOP. ARG BLOCK
	MOVEI	T1,MYTERM	; GET THE STRING BLOCK FOR THE PORT ID
	MOVEM	T1,NOPBLK+.NOPNM; STORE IT TOO.
	MOVEI	T1,NOPBLK	; POINT TO THE ARG BLOCK
	NETOP.	T1,		; GET OUR TERMINAL'S REAL NAME
	 JRST	INITI3		; ERROR, GO TRY OLD ANF WAY
	MOVEI	T1,MYNODE	; OK, POINT AT MY NODE NAME
	PUSHJ	P,GET826	; CONVERT IT TO SIXBIT
	MOVEM	WD,MYNNAM	; STORE MY SIXBIT NODE NAME
	MOVE	T1,NOPBLK+.NOFLG; GET THE RETURNED FLAGS WORD
	TXNE	T1,NO.DCN	; IS THIS A DECNET LINE?
	TXO	F,F.DCNL	; YES, REMEMBER THAT
	TXNN	T1,NO.DCN!NO.LAT; ARE WE A FUNNY TERMINAL?
	TXOA	F,F.ANFL	; NO, ASSUME ANF
	JRST	INITI5		; YES, DON'T GET A NUMERIC NODE NAME THEN
INITI3:	HLRZ	T1,NL.ME	; GET MY NODE NUMBER
	PUSHJ	P,CVTSIX	; CONVERT TO SIXBIT-LEFT JUSTIFIED
	EXCH	WD,T1		; PUT THE WORD WHERE WE CAN COPY IT
	MOVEI	T1,MYNUMB	; POINT TO THE ASCII STORAGE BLOCK
	PUSHJ	P,GET628	; GET AN ASCII VERSION OF THIS
	EXCH	T1,WD		; PUT THE NODE NAME BACK INTO T1
	LSH	T1,-^D18	; SHIFT RESULT TO RIGHT HALF
	HRLI	T1,'OPR'
	PUSHJ	P,GTNTN$	; GET OUR, POSSIBLY LOCAL, OPR
	MOVEM	T1,NL.LOP

	TXOE	F,F.ANFL	;ALREADY HAVE OUR NODE NAME SETUP?
	JRST	INITI5		;YES, SKIP THIS
	MOVE	T2,[2,,T3]	; NODE. UUO ARGUMENT POINTER
	MOVEI	T3,2		; COUNT
	HLRZ	T4,NL.ME	; MY NODE
	NODE.	T2,0
	 MOVE	T2,['CENTRA']
	MOVEM	T2,MYNNAM	; SAVE SIXBIT NODE NAME
	MOVE	WD,T2		;COPY THE NODE NAME
	MOVEI	T1,MYNODE	;POINT TO THE NODE NAME STRING BLOCK
	PUSHJ	P,GET628	;CONVERT IT TO ASCII
	HRRZ	T1,NL.ME	;GET MY LINE NUMBER ON ANF NODE
	PUSHJ	P,CVTSIX	;CONVERT IT TO SIXBIT
	HRRI	T1,'TTY'	;MAKE IT INTO 'TTYNN' (SORT OF)
	MOVS	WD,T1		;COPY THE TERMINAL NAME
	MOVEI	T1,MYTERM	;POINT TO THE STORAGE FOR THE ASCII VERSION
	PUSHJ	P,GET628	;GET THE ASCII VERSION OF THE TERMINAL NAME
INITI5:	MOVX	T1,%CNSER	;GET APR
	GETTAB	T1,		; SERIAL
	  MOVEI	T1,0		; NUMBER
	MOVEM	T1,APRSN	;SAVE FOR LATER
	MOVE	T2,JOBN		;GET JOB NUMBER
	IDIVI	T2,^D36		;COMPUTE WORD AND POSITION FOR MY JOB
	MOVSI	T1,(1B0)	;IN "JOB WAITING FOR HIGHSEG LOCK" TABLE
	MOVNS	T3		;TO SPEED UP SYSTEM STARTUP
	LSH	T1,(T3)		;BY ONLY WAKING UP THE JOBS ACTUALLY
	MOVEM	T1,MYBIT	;WAITING, THIS PREVENTS LOTS OF
	ADDI	T2,JOBWAT	;JOBS FIGHTING FOR THE INTERLOCK
	MOVEM	T2,MYWRD

INIT.1:	MOVE	T2,TERNUM	;GET TERMINAL NUMBER
	MOVEI	T1,.TORSP	; GET RECEIVE SPEED
	MOVE	T3,[2,,T1]
	TRMOP.	T3,
	 SETO	T3,		; IF FAILS, USE ONES
	MOVEM	T3,MYSPD
SUBTTL	CODE TO HANDLE SPECIAL STARTUP CONDITIONS

;HERE TO SEE IF THIS IS DUE TO A SYSTEM GOING DOWN OPERATION
;THE IDEA IS THAT INITIA WILL HAVE BEEN INVOKED BY OPSER
;OVER A PTY IN ORDER TO CALL KJOB IN A DETACHED FASHION

REPEAT 0,<	;NO LONGER NEEDED (SINCE OPSER V.5A)
	MOVX	T1,%NSKTM	;GET THE KSYS COUNTER
	GETTAB	T1,		; FROM THE MONITOR
	  JRST	NTKSYS		;IF NOT, MUST BE PRE-KSYS
	JUMPGE	T1,NTKSYS	;SEE IF BEYOND SHUT DOWN
	SETOM	T1		;YES--SEE IF WE ARE A SUBJOB
	CTLJOB	T1,		; BY SEEING IF WE ARE CONTROLLED
	  JRST	NTKSYS		;NOT KSYS IF NO SUCH UUO
	TLNE	ME,-1		;SEE IF DETACHED
	JUMPL	T1,NTKSYS	;JUMP IF ATTACHED TO REAL TTY
	JRST	KSYS		;KILL OFF IF DET. OR CONTROLLED
>; END REPEAT 0

NTKSYS:	MOVE	T1,NL.ME	; GET OUR NODE/LINE
	TXNE	F,F.ANFL	; SKIP IF NOT ON AN ANF-10 LINE
	TLNN	T1,-1		; NODE ZERO?
	JRST	NOTREM		; YES, CAN'T BE REMOTE OPR THEN
	CAMN	T1,NL.LOP	; AM I A REMOTE OPR?
	CAMN	T1,NL.OPR	; ..
	JRST	NOTREM		; NO
	MOVEI	T1,4		;YES, MAKE SURE IT'S A REMOTE STATION
	MOVE	T2,MYNNAM	;OUR NODE NAME
	SETZ	T3,		;BLANK (RESERVED)
	MOVEI	T4,.TYMCR	;COMMAND PROCESSOR
	MOVE	T5,[.NDRCI,,T1]	;FUNCTION CODE FOR NODE.
	NODE.	T5,		;ASK
	  TLO	T4,1		;FAILED, CAN'T BE REMOTE OPR
	TLNN	T4,-1		;DOES THIS NODE HAVE ANY COMMAND DECODERS?
	TXO	F,F.REMO	;NO, MUST BE REMOTE OPERATOR
;HERE TO SEE IF CALLED FROM FORCED .HELLO COMMAND OR
;IF NORMAL COMMAND WITH ARGUMENTS.

NOTREM:	TLNE	ME,-1		;SEE IF DETACHED
	TXNE	F,F.CCLC	;OR IF CCL CALL
	JRST	INIC.6		;RIGHT--NO RESCAN

;HERE TO SEE IF WE HAVE COMMANDS ON LINE

	MOVEI	T1,TTYIN	;SET FOR TTY INPUT
	MOVEM	T1,GETCH	; IN CHARACTER GETTER
	RESCAN	1		;RETRY LINE
	  SKPINC		;SEE IF SOMETHING THERE
	    JRST INIC.3		;NOTHING--CHECK FOR FORCED CALL
	TXO	F,F.RTTY	;INDICATE COMMITMENT TO REEAT LINE
	PUSHJ	P,GETWRD	;SEE IF INITIA
	CAIN	CH,":"		;SEE IF DEVICE
	JRST	.-2		;YES--TRY AGAIN
	XOR	WD,['INITIA']	;SEE IF INITIA COMMAND
	TDNN	WD,T1		; OR ABBREVIATION
	JRST	INIC.2		;YES--GO SET FLAG
INIC.1:	CAIN	CH,"("		;SEE IF THIS FORM
	JRST	INIC.2		;YES--FLAG COMMAND
	PUSHJ	P,GETWRD	;NO--MOVE ON FOR (...) FORM
	TXNE	F,F.ECMD!F.EOF	;SEE IF END OF LINE YET
	JRST	INIC.6		;YES--GIVE UP
	JRST	INIC.1		;NO--LOOP ONWARDS
INIC.2:	TXO	F,F.ICMD	;SET COMMAND FLAG
	JRST	INIC.6		;AND PROCEED

;HERE IF NO COMMAND IN INPUT BUFFER.

INIC.3:			;COULD CHECK FOR .HELLO HERE
	TXNN	F,F.LOGI	;SEE IF LOGGED IN
	TXO	F,F.ANSW	;NO--INDICATE ANSWER MODE
INIC.6:
;CONTINUED ON NEXT PAGE
SUBTTL	MAIN PROGRAM--HANDLE COMMAND SCANNING AND DISPATCH

;CONTINUED FROM PREVIOUS PAGE

;HERE WHEN DONE WITH COMMAND ANALYSIS AND READY TO ISSUE
;THE SYSTEM SIGNON MESSAGE

INIS.0:	SETZM	GETCH		;CLEAR CHARACTER GETTER

;HERE TO LOOK FOR FILE SYS:TTY.INI

	MOVSI	T5,(UU.PHS)	;ASCII MODE, PHYSICAL ONLY.
	MOVSI	T6,'SYS'	;DEVICE SYS:
	MOVEI	T7,IBF		;POINT TO BUFFER HEADER
	MOVSI	T1,'TTY'	;FILE NAMED
	MOVSI	T2,'INI'	;  TTY.INI[-]
	SETZB	T3,T4		;  ..
	PUSHJ	P,HILOOK	;LOOK IN HISEG OR ON DSK:
	  INTERR(TNF,<SYS:TTY.INI not found>,<JRST TYIN.2>)
	MOVEI	T1,FILINC	;SET FOR FILE INPUT
	MOVEM	T1,GETCH	; FOR CHARACTER GRABBER
	TXZ	F,F.ECMD!F.EOF!F.ALIN ;CLEAR SCANNING FLAGS

;HERE TO LOOP OVER LINES IN FILE TO FIND ONE FOR THIS TTY

TYIN.1:	PUSHJ	P,FILELC	;CONDITIONALLY DO THIS LINE
	JUMPGE	CH,TYIN.1	;UNLESS EOF, LOOP THROUGH FILE
	SETZM	GETCH		;CLEAR CHARACTER GETTER
	SETZM	LOWPTR		;CLEAR PTR TO HISEG
TYIN.2:	RELEAS	TI,		;RELEASE FILE
;HERE TO LOOK FOR ENTRY IN DSK:SWITCH.INI[,]/PHY IF LOGGED IN

	TXNN	F,F.LOGI	;SEE IF LOGGED IN
	JRST	SWIN.3		;NO--SKIP SWITCH.INI
	MOVX	T1,UU.PHS	;YES--SET /PHYSICAL
	MOVSI	T2,'DSK'	;DSK:
	MOVEI	T3,IBF		;BUFFER HEADER
	OPEN	TI,T1		;OPEN
	  JRST	SWIN.3		;IGNORE IF CAN'T OPEN
	MOVE	T1,['SWITCH']	;FILE
	MOVSI	T2,'INI'	; SWITCH.INI
	MOVEI	T3,0		; ..
	MOVE	T4,MYPPN	; [,]
	LOOKUP	TI,T1		;GET FILE
	  JRST	SWIN.3		;IGNORE IF NOT THERE
	MOVEI	T1,FILINC	;SET FOR FILE INPUT
	MOVEM	T1,GETCH	; FOR CHARACTER GRABBER
	TXZ	F,F.ECMD!F.EOF!F.ALIN ;CLEAR SCANNING FLAGS

;HERE TO LOOP OVER LINES IN FILE TO FIND ONE FOR INITIA THIS TTY

SWIN.1:	PUSHJ	P,GETWRD	;GET FIRST WORD OF LINE
	CAME	WD,['INITIA']	;SEE IF FOR INITIA
	JRST	[PUSHJ P,FILELS	;NO--SKIP LINE
		 JRST  SWIN.2]	;AND FINISH LINE
	CAIE	CH,":"		;YES--SEE IF OPTION
	JRST	[PUSHJ P,FILELN	;NO--ASSUME ALL
		 JRST  SWIN.2]	;AND FINISH LINE
	PUSHJ	P,FILELC	;YES--DO IF THIS TTY
SWIN.2:	JUMPGE	CH,SWIN.1	;LOOP TO EOF
	SETZM	GETCH		;CLEAR CHARACTER GRABBER
SWIN.3:	RELEAS	TI,		;FREE CHANNEL
;HERE TO LOOK FOR THIS PROCESSOR S/N IN TABLE

	PUSHJ	P,DOCMD		;GO HANDLE COMMAND LINE
	PUSHJ	P,DOTTYS	;GO DO TTY SETUP
	TXNE	F,F.FLN		;FRCLIN?
	 JRST	INIF.0		;YES, START DUMPING STUFF DOWN FRCLIN
	SKIPE	T1,JUMPPR	;SEE IF PROCESSOR SET
	JRST	(T1)		;YES--GO DO THAT
	MOVE	T1,APRSN	;GET APR S/N
	MOVSI	T2,-APRTBL	;INITIALIZE FOR SEARCH ON APR S/N
	CAME	T1,APRTAB(T2)	;TEST FOR MATCH
	AOBJN	T2,.-1		;NO--LOOP UNTIL DONE
				;IF NOT FOUND, USE CATCHALL SET

;HERE TO LOOK THROUGH SPECIAL PROCESSING TABLE

	HRRZ	T3,APRTBV(T2)	;GET ADDRESS OF JUMP TABLE
	HLRZ	T2,APRTBV(T2)	;GET ADDRESS OF NAME TABLE
	HRLI	T2,T1		;ADD INDEXING
	HRLI	T3,T1		; ..

	MOVSI	T1,-SPTABL	;INITIALIZE FOR SEARCH ON NAME
TTYS.1:	SKIPN	T4,@T2		;FETCH TTY NAME, CHECK FOR END
	JRST	NOTFND		;END OF TABLE
	CAME	ME,T4		;TEST FOR MATCH
	AOBJN	T1,TTYS.1	;NO--LOOP UNTIL DONE
	JUMPGE	T1,NOTFND	;YES--IF NOT FOUND, GIVE UP
	HLRZ	T2,@T3		;SEE IF ANY TTY SET-UP NEEDED
	SKIPE	T2		;NO--SKIP
	PUSHJ	P,(T2)		;YES--SEND IT VIA SPECIAL ROUTINES
	HRRZ	T2,@T3		;GET SPECIAL PROCESSOR
	JUMPN	T2,(T2)		;GO TO IT IF NEEDED


;HERE IF NO SPECIAL PROCESSING REQUESTED IN TABLES
;SEE IF DEVICE OPR:, IF SO, BRING UP OPSER IN CCL MODE.
;THIS WILL CAUSE OPSER TO READ THE AUTO FILE AUTOMATICALLY.

NOTFND:	MOVX	T1,%CNOPR	;GET NAME OF
	GETTAB	T1,		; DEVICE OPR:
	  JRST	GEN		; IGNORE IF UNKNOWN
	TXNN	F,F.REMO	;YES--SEE IF REMOTE OPR
	CAMN	T1,ME		;NO--SEE IF LOCAL OPR
	JRST	OPSER1		;YES--GO DO OPSER CCL
;HERE FOR NON-INTERESTING TERMINAL

GEN:	MOVX	T1,%CNSTS	;GET SYSTEM STATES
	GETTAB	T1,		; FROM MONITOR
	  MOVEI	T1,0		;(ASSUME OK)
	TXNN	T1,ST%BON!ST%NRL!ST%NLG ;IF LOGIN ALLOWED,
	TXNN	F,F.ANSW	;SEE IF FORCED COMMAND
	JRST	GEN.4		;NO--JUST FINISH UP
	TTYSTR	[ASCIZ \Please LOGIN\]
	TXNE	F,F.NJBS	;SEE IF JOBSTS WORKED
	JRST	GEN.2		;NO--SKIP THIS LOGIC
	MOVEI	T1,1		;YES--START AT JOB 1
GEN.1:	MOVE	T2,T1		;GET THIS JOB NUMBER
	TRMNO.	T2,		;GET ITS TERMINAL
	  JRST	[JUMPN  T2,GEN.2 ;FAILED--IF NO ANSWER, GIVE UP
		 MOVN   T2,T1	;GET JOB
		 JOBSTS T2,	;GET ITS STATUS
		   JRST GEN.3	;OK IF NONE
		 HRLZ   T3,T1	;GET JOB NUMBER
		 HRRI   T3,.GTPPN ;GET ITS PPN
		 GETTAB T3,	;(FROM MONITOR)
		   MOVEI T3,0	; ..
		 CAME   T3,FFAPPN ;UNLESS [1,2],
		 JUMPL  T2,GEN.2 ; IF DETACHED, ISSUE MESSAGE
		 JRST   .+1]	;ELSE, CONTINUE LOOP
	AOJA	T1,GEN.1	;LOOP
GEN.2:	TTYSTR	[ASCIZ / or ATTACH/]
GEN.3:	TTYSTR	CRLFM

GEN.4:	JRST	KILJOB		;JUST TYPE SYSTEM START-UP MESSAGE
				; AND RETURN TO MONITOR
	SUBTTL	FRCLIN PROCESSING

;HERE TO FIND SYS:SYSJOB.INI AND FORCE IT DOWN FRCLIN'S THROAT

INIF.0:	CTYSTR	[ASCIZ\[FRCLIN INITIA: running]
\]				;LEAVE INCONTESTABLE TRACKS
	RELEAS	TTY,		;LEGGO OF TTY (AKA FRCLIN)
	MOVSI	T1,-1		;-1,,0 = DETACH
	ATTACH	T1,		;DETACH FROM FRCLIN
	 JRST	[CTYSTR	[ASCIZ\?FRCLIN INITIA: Unable to DETACH from FRCLIN
\]
		JRST	LOGO1$]		;SLIP BACK INTO THE CRACKS
	PUSHJ	P,ACCT$		;GO SET THE ACCOUNT STRING
	 CTYSTR	[ASCIZ\%FRCLIN INITIA: Unable to set account string for TTY STOMPER
\]				;COMPLAIN IF ERRORS HERE
	MOVE	T1,[-4,,T2]	;I'M DETACHED, ITS SAFE TO LOG IN AS [1,2]
	MOVE	T2,FFAPPN	;PPN WE ARE GOING TO LOGIN TO. (OPR JOB)
	MOVX	T3,%CNPRV	;GET THE PRIVILEGE
	GETTAB	T3,		;  BITS THAT WE'RE ALLOWED
	 MOVSI	T3,-1		;ERROR? DEC PRIVS ONLY,
	DMOVE	T4,[SIXBIT /TTY STOMPER/] ;USER NAME, MNEMONIC FOR JOB
	LOGIN	T1,		;LOG US IN, TO KEEP US SAFE FROM PROGRAMS
				;THAT DESTROY LOGGED OUT JOBS
	JFCL			;Documentation claims this is an error return.
	MOVE	T1,[.STUVM,,[^D16384,,^D16384]] ;SET THE PHYSICAL AND VIRTUAL
	SETUUO	T1,		;  PAGE LIMITS FOR THIS JOB
	  SKIPA	T1,[.STUVM,,[^D512,,^D512]] ;FAILED?  TRY LOWER LIMITS
	SKIPA			;OK, GO ON
	SETUUO	T1,		;TRY TO SET THE LOWER LIMITS
	 JFCL			;NOT REALLY THAT IMPORTANT I GUESS
	MOVSI	T5,(UU.PHS)	;PHYSICAL ONLY SYS
	MOVSI	T6,'SYS'
	MOVEI	T7,IBF		;THE INPUT BUFFER
	MOVE	T1,[SIXBIT/SYSJOB/]
	MOVSI	T2,'INI'	;THE FILE TO READ
	SETZB	T3,T4		;REST OF THE LOOKUP BLOCK
	SETZM	LOWPTR		;IN CASE JUNK THERE
	OPEN	TI,T5		;OPEN DEVICE FOR SYSJOB
	 JRST	INIF.1		;SYS ISN'T THERE? LOSE.
	LOOKUP	TI,T1		;FIND SYSJOB.INI
	 JRST	INIF.1		;HMM. TELL CTY WE CAN'T FIND SYSJOB
	TXZ	F,F.EOF		;HAVEN'T SEEN EOF YET
	SETZM	FLNPNT		;NEED TO INIT BYTE STUFFER
	SETO	T7,		;SET THE INITIAL STATE FOR LOOKING FOR "LOG"
	MOVEI	CH,.CHCNC	;A CONTROL-C TO START THINGS OFF WITH A BANG
	TXO	F,F.ECMD	;"EOL"
	JRST	INIF.5		;ENTER SYSJOB.INI LOOP

INIF.1:	CTYSTR	[ASCIZ\%FRCLIN INITIA: Can't read SYS:SYSJOB.INI
\]
	JRST	TTWINI		;KEEP GOING
;LOOP SENDING SYSJOB.INI TO FRCLIN

INIF.3:	PUSHJ	P,FILIN		;GET ANOTHER CHARACTER
	 SKIPA			;EOL OR EOF. SEE WHICH
	JRST	INIF.5		;NORMAL CHARACTER, STUFF IT
	TXNN	F,F.OLD		;IF OLD MONITOR, END OF LINE MEANS END OF CMD
	SKIPGE	CH		;END OF FILE?
	TXO	F,F.ECMD	;YES, SAY SO.
	MOVEI	CH,.CHCRT	;GET EOL INDICATOR

;HERE WITH CHARACTER IN CH FOR FRCLIN

INIF.5:	SKIPN	FLNPNT		;READY FOR CHARACTERS?
	JRST	[MOVEI	T1,FLN$MX-1	;MAXIMUM BYTE COUNT
		TXNE	F,F.OLD		;OLD MONITOR?
		MOVEI	T1,FLO$MX-1	;YES, GET OLD MAXIMUM BYTE COUNT
		MOVEM	T1,FLNCNT	;SET THAT FOR CHAR LOOP
		MOVE	T1,[POINT 7,FLNBUF]  ;INITIAL BYTE POINTER
		MOVEM	T1,FLNPNT	;SET FOR CHAR LOOP
		SKIPG	T7		;DID WE FIND "<CR>LOG"?
		JRST	.+1		;NO, JUST CONTINUE WITH THIS CHARACTER
		MOVEI	T1,FLN$MX-4	;YES, SAY WE ATE FOUR CHARACTERS
		MOVEM	T1,FLNCNT	;STORE THE NEW BYTE COUNT
		MOVE	T1,[POINT 7,FLNBUF,20] ;GET THE CORRECT BYTE POINTER
		MOVEM	T1,FLNPNT	;STORE THE NEW BYTE POINTER
		MOVE	T1,[ASCII \LOG\] ;GET THE CHARACTERS WE ATE
		MOVEM	T1,FLNBUF	;PUT THEM IN THE BUFFER
		JRST	.+1]		;CONTINUE WITH CHARACTER
	IDPB	CH,FLNPNT	;STASH THIS CHARACTER
	CAIL	CH,"a"		;IS THIS CHARACTER
	CAILE	CH,"z"		; LOWER CASE?
	SKIPA			;NO, GO ON
	SUBI	CH,"a"-"A"	;YES, MAKE IT UPPER CASE NOW
	CAMN	CH,[EXP .CHCRT,"L","O","G"]+1(T7) ;IS IT WHAT WE'RE LOOKING FOR NOW?
	XCT	[AOSA	T7		;YES, INCREMENT THE STATE
		 AOSA	T7
		 AOSA	T7
		 JRST	[TXO	F,F.ECMD	;END OF STRING. SAY END OF COMMAND TOO
			 MOVEM	T6,FLNPNT	;RESET THE BUFFER POINTER TO BEFORE COMMAND
			 JRST	INIF.4]]+1(T7)	;SEND THE STRING
	 SETO	T7,		;NO MATCH, RESET THE STATE
	SKIPN	T7		;JUST MOVE TO STATE ZERO?
	MOVE	T6,FLNPNT	;YES, SAVE THE STORAGE POINTER
	SOSLE	FLNCNT		;IF BUFFER FULL,
	TXNE	F,F.ECMD	;OR IF EOL
	CAIA			;EOL, OR BUFFER FULL
	JRST	INIF.3		;WANT MORE CHARACTERS

;TYPE THE CHARACTER STRING INTO FRCLIN AS A COMMAND

INIF.4:	MOVEI	T4,0		;A NULL
	IDPB	T4,FLNPNT	;ASCIZIZE THE STRING
	MOVEI	T4,FLNBUF	;THE BUFFER/STRING ADDRESS
	MOVE	T3,FLNNUM	;FRCLIN UDX
	MOVEI	T2,.TOTYP	;"TYPE" FUNCTION
	MOVE	T1,[3,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;TYPE INTO FRCLIN
	 JRST	[CTYSTR	[ASCIZ\?FRCLIN INITIA: Error typing SYSJOB.INI into FRCLIN
\]
		JRST	TTWINI]		;KEEP GOING
	SETZB	T4,FLNPNT	;RESET BYTE POINTER
	TXZN	F,F.ECMD	;WAS THAT EOL, OR LONG LINE?
	JRST	[CTYSTR	[ASCIZ \%FRCLIN INITIA: FRCLIN command too long
\]					;LONG LINE, JUST WARN ABOUT IT
		 SETO	T7,		;RESET THE STATE
		 JRST	INIF.3]		;GO GET THE REST OF THIS BUNCH
	TXZE	F,F.EOF		;EOL, ANY MORE FILE TO DO?
	JRST	TTWINI		;NO, JUST SLIP AWAY
	MOVEI	T2,.TOTTC	;SKIP IF INPUT IN PROGRESS
INIF.8:	MOVE	T1,[2,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;SEE IF INPUT IN PROGRESS ON FRCLIN
	 JRST	INIF.9		;THIS CAN'T FAIL.
	JUMPE	T1,INIF.3	;WHEN INPUT BUFFER EMPTY, GIVE HIM MORE
	SLEEP	T4,		;WAIT TWO TICS
	JRST	INIF.8		;SEE IF READY YET

INIF.9:	CTYSTR	[ASCIZ \%FRCLIN INITIA - Problem checking FRCLIN buffer
\]
	JRST LOGO2$		;QUIT
;HERE WHEN SYSJOB.INI HAS BEEN STUFFED DOWN FRCLIN'S THROAT.
;NOW WATCH FOR OPEN TTY LINES BOGGING DOWN THE SYSTEM, IF SO DESIRED.

TTWINI:
IFLE TTWMAX,<JRST LOGO2$>	;NO STOMPR DESIRED, GO AWAY.
IFG TTWMAX,<
	SKIPN	TTWFLG		;START UP STOMPR?
	JRST	[CTYSTR [ASCIZ \%%TTY STOMPER - Not starting
\]
		JRST LOGO2$]
	RELEASE	TI,		;LET GO OF ANYTHING ON THIS CHANNEL, SINCE
				;WE ARE GOING TO BE AROUND FOREVER.
	CTYSTR	[ASCIZ \%%TTY STOMPER - Starting
\]
	MOVE	T1,[SIXBIT \STOMPR\] ;SET NAME TO SOMETHING RECOGNIZABLE.
	SETNAM	T1,		;(SINCE WE DON'T NEED JACCT ANY MORE)

	MOVE	T1,[%FTDEB]	;GETTAB TABLE WITH FTRSP IN IT
	GETTAB	T1,		;FIND OUT THIS SET OF FEATURE TESTS
	 SKIPA			;FAIL
	TRNN	T1,F%RSP&777777	;DO WE HAVE FTRSP?
	 JRST	[CTYSTR[ASCIZ\?TTY STOMPER - FTRSP is turned off, aborting
\]
		JRST LOGO2$]
	SKIPE	TTWPCT		;GOT POINTERS?
	JRST	TTWIN0		;YES
	AOS	T1,.JBREL	;CALCULATE START ADDRESS OF CHAR COUNT BUFFER
	HRLI	T1,(<1B0 (T7)>)	;SO INDIRECT INDEXES OFF OF T7
	MOVEM	T1,TTWPCT	;SET LINE-INDEXED CHAR COUNT POINTER
	ADD	T1,NL.CTY	;ALLOW FOR ALL POSSIBLE TTY'S
	MOVEM	T1,TTWPTM	;SET LINE-INDEXED COUNT TIMER
	ADD	T1,NL.CTY	;ALLOW FOR ALL POSSIBLE TTY'S
	MOVEM	T1,TTWPRS	;SET LINE-INDEXED CHANNEL,,RECEIVE SPEED
	ADD	T1,NL.CTY	;T1 := FIRST ADDRESS PAST LAST DESIRED ADDRESS
	TLZ	T1,-1		;CLEAR JUNK OUT OF LEFT HALF
	MOVEM	T1,.JBFF	;NOTIFY .JBFF OF HAVING GRABBED MEMORY
	SUBI	T1,1		;T1 := LAST DESIRED ADDRESS
	CORE	T1,		;EXPAND MEMORY AS NEEDED FOR BUFFERS
	 JRST	[CTYSTR	[ASCIZ\?TTY STOMPER - Memory expansion failure
\]
		JRST	LOGO2$]		;GO AWAY

;MAP LINTAB AND LDBS IN, SO WE DON'T HAVE TO EXPEND UUOS.

	MOVE	T1,[%CNLNP]	;POINTER TO LINTAB
	GETTAB	T1,		;ASK MONITOR FOR POINTER
	 JRST	[CTYSTR[ASCIZ\?TTY STOMPER - Gettab failed
\]
		JRST LOGO2$]
	HRRZS	T2,T1		;CLEAR LEFT HALF, COPY ADDRESS
	ADD	T2,NL.CTY	;POINT TO END OF LINTAB
	LSHC	T1,-9		;CONVERT TO PAGE NUMBERS
	HLRZ	T4,T2		;COPY OFFSET WITHIN PAGE TO LINTAB
	SUBI	T1,1(T2)	;CONVERT TO NUMBER OF PAGES
	ADDI	T2,1(T1)	;POINT TO STARTING PAGE
	HRLZ	T2,T2		;PUT IN LEFT HALF AS MONITOR SOURCE ADDRESS
	HRRI	T2,LNTPAG	;PAGE IN OUR ADDRESS SPACE
	MOVE	T3,[.PAGSP,,T1]	;ARG FOR PAGE UUO
	PAGE.	T3,		;MAP IN LINTAB
	 JRST	[CTYSTR[ASCIZ\?TTY STOMPER - PAGE. to map LINTAB failed
\]
		JRST LOGO2$]	;GO AWAY.
	HRLI	T4,LNTPAG	;OUR PAGE FOR LINTAB
	LSH	T4,-9		;RIGHT JUSTIFY
	HRLI	T4,(<1B0(T7)>)	;MAKE IT AN INDIRECT POINTER
	MOVEM	T4,LINTAB	;ESTABLISH POINTER TO LINTAB
;MAP LDBS
	SETZ	T7,		;GET ZEROETH LDB
	MOVE	T1,@LINTAB	;GET POINTER TO FIRST LDB
	TXNE	F,F.OLD		;OLD MONITOR?
	TLZ	T1,-1		;YES, GET RID OF JUNK
	MOVE	T7,NL.CTY	;NUMBER OF LDBS
	SUBI	T7,1		;POINT TO LAST
	MOVE	T2,@LINTAB	;GET LAST LDB
	TXNE	F,F.OLD		;OLD MONITOR?
	TLZ	T2,-1		;YES, GET RID OF JUNK AGAIN
	LSHC	T1,-9		;CONVERT TO PAGE NUMBERS
	SUBI	T1,1(T2)	;CONVERT TO NUMBER OF PAGES
	ADDI	T2,1(T1)	;CONVERT TO STARTING PAGE
	HRLZ	T2,T2		;PUT IN LEFT HALF AS MONITOR SOURCE PAGE
	HRRI	T2,LDBPAG	;PAGE IN OUR ADDRESS SPACE
	MOVE	T4,T2		;SAVE FOR LATER
	MOVE	T3,[.PAGSP,,T1]	;ARG FOR PAGE UUO
	PAGE.	T3,		;ASK FOR THE PAGES
	 JRST	[CTYSTR[ASCIZ\?TTY STOMPER - PAGE. to map LDBs failed
\]
		JRST LOGO2$]	;GO AWAY
	HLRZ	T1,T4		;MONITOR'S PAGE
	SUBI	T1,(T4)		;MINUS OUR PAGE
	ASH	T1,9		;CONVERT TO ADDRESS (OFFSET)
	MOVEM	T1,LDBOFF	;SAVE AS OFFSET FROM LDB ADDR TO VIRTUAL ADDR

TTWIN0:	HRRZ	T8,NL.CTY	;LAST PHYSICAL TTY IN SYSTEM
	MOVNI	T8,-1(T8)	;(NEGATIVE) LAST "USER" TTY IN SYSTEM
	HRLZ	T8,T8		;T8 := MASTER AOBJN INDEXER FOR TTW LOOP

;FIRST MAKE A PASS OVER THE TTY LINES GETTING BASE VALUES

TTWIN2:	MOVE	T7,T8		;COPY OF AOBJN INDEXER
TTWIN3:	MOVEI	T3,.UXTRM(T7)	;TTY UDX
	MOVEI	T2,.TOICT	;TOTAL INPUT CHARACTER COUNT
	MOVE	T1,[2,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;READ TERMINAL INPUT CHARACTER COUNT
	 SETZ	T1,		;FAILED? ASSUME 0
	MOVEM	T1,@TTWPCT	;SAVE COUNT FOR THIS LINE
	MSTIME	T4,		;TIME OF DAY (MILLISECONDS)
	MOVEM	T4,@TTWPTM	;REMEMBER WHEN THE LAST COUNT WAS TAKEN
	SKIPE	@TTWPRS		;BETTER NOT HAVE ANY LINES HANGING AROUND
	HALT	.+1		;OH WELL
	SETZM	@TTWPRS		;CLEAR NEED-TO-GRAB FLAG
	AOBJN	T7,TTWIN3	;LOOP FOR ALL REAL TTY'S
	MOVX	T1,%SCNRI	;GETTAB INDEX TO
	GETTAB	T1,		;READ TOTAL SYSTEM CHARACTER COUNT
	 JRST	LOGO2$		;DON'T BOTHER
	MOVEM	T1,TTWNRI	;SAVE LAST TOTAL SYSTEM COUNT
	MOVEM	T4,TTWNTM	;AND THE TIME IT WAS SAMPLED

;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE

;NOW CHECK ONCE A MINUTE FOR LINES RUNNING OPEN

TTWSL:
	MOVEI	T1,TTWSLP	;SLEEP INTERVAL
	SLEEP	T1,		;A (YAWN) QUICK NAP
TTWSL2:	MOVX	T1,%SCNRI	;GETTAB ITEM TO
	GETTAB	T1,		;OBTAIN SYSTEM CHARACTERS RECEIVED
	 JFCL			;CAN'T HAPPEN
	SUB	T1,TTWNRI	;T1 := INCREMENTAL CHARACTER COUNT
	ADDM	T1,TTWNRI	;ACCUMULATE TOTAL
	MSTIME	T4,		;GET CURRENT TIME OF DAY
	SUB	T4,TTWNTM	;T4 := MILLISECONDS SINCE LAST SAMPLE
	ADDM	T4,TTWNTM	;KEEP TOTAL UP TO DATE
	JUMPLE	T4,TTWIN2	;IF WRAPPED PAST MIDNIGHT, RESET
	IMULI	T1,^D1000	;ALLOW FOR UNITS CONVERSION
	IDIVI	T1,(T4)		;T1 := SYSTEM CHARACTERS PER SECOND THIS SAMPLE
	HRRZ	T2,NL.CTY	;NUMBER OF PHYSICAL TTY'S POSSIBLE
	ASH	T2,-4		;SCALE IT DOWN
	CAMGE	T1,T2		;SEEING MUCH TTY ACTIVITY?
	JRST	TTWSL		;NO

TTWCHN:	MOVEI	T5,20		;FIRST CHANNEL WE USE
TTWCH0:	CAMLE	T5,TTWMCN	;PAST HIGHEST CHANNEL YET?
	 JRST	TTWSP		;YUP - GO AND CHECK FOR NEW OPEN LINES.
	HRLZ	T2,T5		;GET COPY OF CHANNEL NUMBER
	HRRI	T2,.FOGET	;FUNCTION CODE TO FILOP
	MOVE	T1,[XWD 1,T2]	;1 WORD, AND IT IS IN T2
	FILOP.	T1,		;GET STATUS OF THIS DEVICE
	 AOJA	T5,TTWCH0	;NOTHING THERE, TRY NEXT CHANNEL
	TRNE	T1,IO.ERR	;ANY ERROR ON IT?
	 JRST	TTWDET		;YES, LET GO OF THIS TTY
	MOVE	T2,T5		;GET THE CHANNEL NUMBER
	IONDX.	T2,		;GET THE UDX FOR THE CHANNEL
	 AOJA	T5,TTWCH0	;LOST. IGNORE THIS CHANNEL.
	MOVEI	T1,.TOICT	;NUMBER OF CHARACTERS SEEN (SHOULD BE 0)
	MOVE	T4,[2,,T1]	;ARG FOR TRMOP.
	TRMOP.	T4,		;GET NUMBER OF CHARACTER SINCE LAST TIME
	 MOVE	T4,@TTWPCT	;IF WE CAN'T, ASSUME NO CHARACTERS
	HRRZI	T7,-.UXTRM(T2)	;COPY THE TERMINAL'S NUMBER
	CAMG	T4,@TTWPCT	;DID WE GET ANYTHING?
	 AOJA	T5,TTWCH0	;NOPE - IGNORE THIS TERMINAL
	MOVEI	T1,.TOCIB	;CLEAR INPUT BUFFER
	MOVE	T4,[2,,T1]	;ARG FOR TRMOP
	TRMOP.	T4,		;CLEAR HIS INPUT BUFFER
	 AOJA	T5,TTWCH0	;NO CAN DO, MONITOR IS CONFUSED
	MOVEI	T1,.TORSP	;GET THE RECEIVE SPEED.
	MOVE	T4,[2,,T1]	;ARG FOR TRMOP.
	TRMOP.	T4,		;GET THE RECEIVE SPEED FOR THIS TERMINAL
	 AOJA	T5,TTWCH0	;THE MONITOR IS CONFUSED, IGNORE HIM.
	JUMPE	T4,TTWCH1	;SPEED IS ALREADY ZERO. CAN'T HELP THIS.
	SETZ	T3,		;MAKE HIS SPEED 0
	ADDI	T1,.TOSET	;SET FUNCTION.
	MOVE	T4,[3,,T1]	;ARG FOR TRMOP UUO.
	TRMOP.	T4,		;ZAP HIS SPEED.
	 AOJA	T5,TTWCH0	;THIS CANNOT HAPPEN. (KNOCK ON WOOD)
	CTYSTR	[ASCIZ \%TTY STOMPER: Zero-bauded line at \]
	PUSHJ	P,TTCNOD	;TYPE NODE SPECIFICATION FOR TTY ON CTY
TTWCH1:	MOVE	T7,T2		;LETS CLEAN THAT TTY A BIT.
	TRZ	T7,777000	;LEAVE ONLY THE LINE NUMBER.
	PUSHJ	P,TTWTCL	;CLEAN UP INPUT AND OUTPUT.
	AOJA	T5,TTWCH0	;AND GO ON TO THE NEXT TERMINAL

TTWDET:	MOVE	T3,T5		;TYPE THE CHANNEL NUMBER IN OCTAL
	PUSHJ	P,TTCOCT	; SO WE CAN TRACK WHEN WE GRABBED WHAT.
	CTYSTR	CRLFM		;END LINE
	MOVE	T3,T5		;GET COPY OF CHANNEL
	RESDV.	T3,		;RELEASE THE CHANNEL.
	 JFCL			;NO ERROR RECOVERY HERE.
	AOJA	T5,TTWCH0	;TRY NEXT CHANNEL

;NOW SEE IF ANY LINES ARE BEHAVING OBNOXIOUSLY

TTWSP:	MOVE	T7,T8		;RESET LINE INDEXER
	SETZ	T6,		;OPEN LINES FLAG
TTWSP1:	MOVE	T1,@LINTAB	;GET LINTAB ENTRY FOR THIS TTY
	SUB	T1,LDBOFF	;CONVERT TO USER VIRTUAL ADDRESS
	HRRZ	T1,0(T1)	;GET DDB ADDRESS
	JUMPN	T1,[SETOM @TTWPTM ;FLAG DDB OCCUPIED
		   JRST TTWSP2]	;AND JOIN COMMON CODE
	MOVEI	T3,.UXTRM(T7)	;TTY UDX
	MOVEI	T2,.TOICT	;TOTAL INPUT CHARACTER COUNT
	MOVE	T1,[2,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;SEE HOW MANY CHARACTERS THIS LINE HAS SEEN
	 MOVE	T1,@TTWPCT	;DUH? ASSUME NO CHANGE
	MSTIME	T4,		;TIME OF DAY
	SKIPGE	@TTWPTM		;MAKE SURE WE COUNTED LAST TIME THROUGH.
	 JRST	[MOVEM T1,@TTWPCT ;WE DIDN'T, SET THINGS UP NOW
		MOVEM T4,@TTWPTM
		JRST TTWSP2]	;AND FALL INTO COMMON CODE.
	SUB	T1,@TTWPCT	;T1 := COUNT OF CHARACTERS SINCE LAST TIME
	ADDM	T1,@TTWPCT	;UPDATE TOTAL FOR NEXT ITERATION
	SUB	T4,@TTWPTM	;T4 := MILLISECONDS ELAPSED TIME
	ADDM	T4,@TTWPTM	;UPDATE TOTAL FOR NEXT ITERATION
	JUMPL	T4,TTWIN2	;IF WRAPPED AROUND MIDNIGHT, RESET EVERYTHING
	JUMPLE	T1,TTWSP2	;IF NO INPUT ACTIVITY THEN TTY IS OK
	IMULI	T1,^D1000	;SAME MULTIPLE AS TIME OF DAY
	IDIVI	T1,(T4)		;T1 := CHARACTERS PER SECOND
	CAIL	T1,TTWMAX	;SEEING "LOTS" OF ACTIVITY
	SETOB	T6,@TTWPRS	;FLAG TO STOMP ON THIS TTY
TTWSP2:	AOBJN	T7,TTWSP1	;SEE WHAT ELSE IS RUNNING OPEN
	JUMPE	T6,TTWSL	;IF NO LIKELY CANDIDATES, GO BACK TO SLEEP

;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE

;AT LEAST ONE LIKELY CANDIDATE, SEE IF RUNNING OPEN, AND STOMP ON IT IF SO

	MOVE	T7,T8		;RESET AOBJN INDEXER
TTWSP4:	SKIPN	@TTWPRS		;WANT TO CHECK THIS LINE?
	JRST	TTWSP7		;NO
	HRRZ	T1,T7		;YES, GET LINE NUMBER
	PUSHJ	P,CVTSIX	;MAKE SIXBIT NNN
	IORI	T1,'TTY'	;MAKE INTO TTY NAME (SWAPPED)
TTWSP5:	MOVS	T3,T1		;PHYSICAL NAME OF THE TERMINAL
	SETZ	T4,		;NO BUFFERS
	MOVX	T2,UU.PHS+IO.SUP+.IOASC;NO ECHO, BUT ALLOW ^C
	MOVE	T1,[FO.PRV!FO.ASC+.FORED]  ;"OPEN" FILOP. FUNCTION
	MOVE	WD,[4,,T1]	;FILOP. ARG POINTER TO
	FILOP.	WD,		;OPEN THE TTY AS AN I/O DEVICE
	 JRST	[SETZM	@TTWPRS		;ASSUME IN USE AND VALID
		JRST	TTWSP7]		;CHECK THE REST
	LDB	T1,[POINTR T1,FO.CHN]  ;GET MONITOR-ALLOCATED CHANNEL
	CAMLE	T1,TTWMCN	;GREATER THAN MAX. CHANNEL?
	 MOVEM	T1,TTWMCN	;YUP. SAVE AWAY NEW HIGH.
	PUSH	P,T3		;SAVE DEVICE NAME FOR A WHILE
	GTNTN.	T3,		;CONVERT TO NODE,,LINE
	 JRST	[RESDV.	T1,	;NOT CONNECTED ANYWHERE - LET GO OF HIM.
		 JFCL		;IF WE CAN'T GET RID OF HIM, DON'T WORRY.
		POP	P,(P)	;POP DEVICE NAME OFF FOR A WHILE.
		SETZM	@TTWPRS	;ASSUME IN USE.
		JRST	TTWSP7]	;KEEP ON CHECKING FOR OTHER TTYS
;BUILD A LOGICAL NAME THAT LOOKS LIKE "NODE_TTY", WHERE NODE IS TWO DIGITS,
;AND TTY IS THREE DIGITS. IF NODE .GT. 100 (OCTAL), THE TOP DIGIT WILL BE JUNK.
TTWNAM:	HLRZ	T4,T3		;GET NODE NUMBER
	LSHC	T4,-3		;DROP LOW ORDER BYTE DIGIT FOR A WHILE
	ADDI	T4,'0'		;MAKE IT A SIXBIT NUMBER
	LSH	T4,3		;MAKE ROOM FOR PART OF A SIXBIT DIGIT
	LSHC	T4,3		;MAKE ROOM FOR THE REST, BRINGING IT IN.
	ADDI	T4,'0'		;MAKE IT A SIXBIT DIGIT
	LSH	T4,6		;MAKE ROOM FOR ANOTHER SIXBIT DIGIT
	ADDI	T4,'_'		;ADD IT IN
	MOVS	T5,T4		;SAVE NODE NUMBER FOR A WHILE
				;NOW DO THE TTY NUMBER
	LSHC	T3,-6		;DROP LOW ORDER TWO BYTES FOR A WHILE
	ANDI	T3,7		;KEEP ONLY HUNDREDS (64'S) DIGIT
	ADDI	T3,'0'		;MAKE IT SIXBIT
	LSH	T3,3		;MAKE ROOM FOR PART OF NEXT DIGIT
	LSHC	T3,3		;ROOM FOR REST, BRINGING IT IN
	ADDI	T3,'0'		;MAKE IT SIXBIT
	LSH	T3,3		;ROOM FOR LAST DIGIT
	LSHC	T3,3		;..
	ADDI	T3,'0'		;.....
	HLL	T3,T5		;GET "NODE_"
	POP	P,T2		;AND GET BACK TTY NAME
	DEVLNM	T2,		;SET LOGICAL NAME TO NODE,,LINE
	 JFCL			;IGNORE ANY ERROR.
	HRLOM	T1,@TTWPRS	;SAVE THE CHANNEL NUMBER AWAY

;NOW TRY TO CALM THE TTY DOWN

	MOVEI	T3,.UXTRM(T7)	;TTY UDX
	MOVEI	T2,.TORSP	;TTY RECEIVE SPEED
	MOVE	T1,[2,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;READ TTY RECEIVE SPEED
	 SETO	T1,		;DUH?
	HRRM	T1,@TTWPRS	;SAVE AWAY OLD TERMINAL RECEIVE SPEED
	MOVEI	T4,0		;0 BAUD
	MOVEI	T2,.TORSP+.TOSET;TTY RECEIVE SPEED
	MOVE	T1,[3,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;SET TERMINAL RECEIVE SPEED
	 JFCL			;OH WELL
	PUSHJ	P,TTWTCL	;CLEAR OUT ANY CHARACTERS
	AOS	T6		;FLAG WE DID SOMETHING
	PUSH	P,T3		;Save UDX for this terminal
	CTYSTR	[ASCIZ \%%TTY STOMPER: Quieting open line on TTY\]
	HRRZ	T3,T7		;GET TTY NUMBER
	PUSHJ	P,TTCOCT	;TYPE DIGITS
	CTYSTR	[ASCIZ	\ at \]
	POP	P,T2		;GET UDX BACK INTO T2
	PUSHJ	P,TTCNOD	;AND TYPE OUT THE NETWORK SPECIFICATION
TTWSP7:	AOBJN	T7,TTWSP4	;LOOK FOR ANY MORE TERMINALS
	JUMPL	T6,TTWSL	;IF NOTHING ACCOMPLISHED, BACK TO SLEEP

;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE

;NOW WAIT AROUND A BIT FOR THE LINES TO SETTLE DOWN

TTWSQ:	MOVEI	T6,4		;REPEATITION COUNTER
TTWSQ0:	MOVE	T7,T8		;RESET INDEXER
TTWSQ1:	SKIPE	@TTWPRS		;POUNDING ON THIS TERMINAL?
	PUSHJ	P,TTWTCL	;YES, EAT ANY STRAGGLING CHARACTERS
	AOBJN	T7,TTWSQ1	;CHECK EM ALL
	MOVEI	T1,1		;A FEW SECONDS
	SLEEP	T1,		;TO WAIT FOR STRAGGLERS
	SOJG	T6,TTWSQ0	;LOOK FOR STRAGGLING STRAGGLERS

;NOW RESET THE TERMINALS TO A WORKABLE STATE

TTWSR:	MOVE	T7,T8		;RESET AOBJN INDEXER
TTWSR1:	SKIPN	T6,@TTWPRS	;HAVE WE GRABBED THIS LINE?
	JRST	TTWSR7		;NO
	HRRE	T4,T6		;GET ORIGINAL TERMINAL RECEIVE SPEED
	JUMPL	T4,TTWSR3	;IF NO RECEIVE SPEED DON'T RESET IT
	MOVEI	T3,.UXTRM(T7)	;TTY UDX
	MOVEI	T2,.TORSP+.TOSET;TTY RECEIVE SPEED
	MOVE	T1,[3,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;RESTORE TERMINAL RECEIVE SPEED
	 JFCL			;TOO BAD
TTWSR3:	SETZM	@TTWPRS		;THIS TTY LINE OF NO FURTHER INTEREST
TTWSR7:	AOBJN	T7,TTWSR1	;LOOP FOR EM ALL
	JRST	TTWSL2		;BACK AND TRY AGAIN


;HELPER TO CLEAR TTY INPUT AND OUTPUT (ASSUMES T7 IS LINE NUMBER)

TTWTCL:	MOVEI	T3,.UXTRM(T7)	;TTY UDX
	MOVEI	T2,.TOCIB	;CLEAR INPUT BUFFER FUNCTION
	MOVE	T1,[2,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;EAT ALL INPUT PENDING
	 JFCL			;DUH?
	MOVEI	T2,.TOCOB	;CLEAR OUTPUT BUFFER FUNCTION
	MOVE	T1,[2,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	T1,		;EAT ALL OUTPUT TOO
	 JFCL			;SHOULDN'T HAPPEN
	MOVE	T1,[2,,T2]	;TRMOP. ARG POINTER TO
	MOVEI	T2,.TOICT	;READ INPUT CHARACTER COUNT
	TRMOP.	T1,		;GO READ IT
	 MOVE	T1,@TTWPCT	;CAN'T? JUST USE AN OLD VALUE
	MOVEM	T1,@TTWPCT	;STORE NUMBER OF CHARACTERS SEEN.
	POPJ	P,		;ALL CHARACTERS EATEN

;Type out a node specification for a TTY on the CTY
;Assumes UDX is in T2

TTCNOD:	MOVE	T1,T2		;UDX, TO GET THE NODE NUMBER
	GTNTN.	T1,		;WE GET NODE,,LINE NUMBER
	 JRST	TTCGER		;FAILED??
	HLRZM	T1,NODLOC	;GET NODE NUMBER
	MOVEI	T3,2		;LENGTH OF ARGLIST
	MOVEM	T3,NODLEN	;NUMBER OF WORDS FOR NODE UUO
	MOVE	T3,[.NDRNN,,NODBLK];ARGUMENT FOR NODE. UUO
	NODE.	T3,		;TRANSALATE NODE NUMBER TO NODE NAME
	 JRST	TTCNER		;THIS SHOULDN'T HAPPEN.
	PUSHJ	P,TTCSIX	;TYPE IT OUT ON THE CTY
	CTYSTR	[ASCIZ \_TTY\]	;NODE_TTYNNN SEPARATOR
TTWT1O:	HRRZ	T3,T1		;LINE NUMBER
	PUSHJ	P,TTCOCT	;TYPE THE OCTAL LINE NUMBER ON CTY
	CTYSTR	CRLFM		;END LINE WITH CRLF
	POPJ	P,		;FINISHED DUMPING JUNK.

TTCGER:	CTYSTR	[ASCIZ\ GTNTN. failed, code \]
	TRNA			;FALL INTO TYPEOUT CODE
TTCNER:	CTYSTR	[ASCIZ\ NODE. failed, code \]
	JRST	TTWT1O		;TYPE OUT T1 IN OCTAL

;Type out an octal number on the CTY.
;Assumes octal number in T3

TTCOCT:	IDIVI	T3,10		;GET OUT A DIGIT
	PUSH	P,T4		;PUSH THE DIGIT
	SKIPE	T3		;HAVE WE EXTRACTED ALL WE CAN?
	 PUSHJ	P,TTCOCT	;NOPE, TRY FOR ANOTHER DIGIT OR TWO.
	POP	P,T4		;GET TOP DIGIT (FIRST DIGIT)
	CTYCHR	"0"(T4)		;TYPE OUT THE DIGIT CORRESPONDING.
	POPJ	P,		;RETURN, EITHER MORE DIGITS, OR TO USER.

TTCSIX:	JUMPE	T3,CPOPJ	;IF NOTHING LEFT, RETURN
	SETZ	T4,		;CLEAR DESTINATION
	ROTC	T3,6		;SHIFT BY ONE CHARACTER
	CTYCHR	" "(T4)		;OUTPUT THE CHARACTER IN ASCII ON THE CTY
	JRST	TTCSIX		;AND TRY FOR A FEW MORE CHARACTERS.
>;END IFG TTWMAX
SUBTTL	HANDLE COMMAND LINE

;SUBROUTINE TO HANDLE COMMAND LINE

DOCMD:	TXNE	F,F.RTTY	;IF NO COMMAND LEFT, RETURN
	TXNN	F,F.ICMD	;SEE IF COMMAND
CPOPJ:	POPJ	P,		;NO--GIVE UP
	MOVEI	T1,TTYIN	;SET FOR TTY
	MOVEM	T1,GETCH	; IN CHARACTER GRABBER
	MOVEI	CH,0		;CLEAR CHARACTER GRABBER
	TXZ	F,F.ECMD!F.EOF!F.ALIN ;CLEAR SCANNING FLAGS
DOCM.1:	TXNN	F,F.ECMD!F.EOF	;SEE IF END OF COMMAND
	CAIN	CH,")"		;SEE IF END OF COMMAND YET
	JRST	DOCM.3		;YES--ALL DONE
	PUSHJ	P,GETWRD	;GET NEXT COMMAND WORD
	JUMPE	WD,DOCM.2	;LOOP IF NULL
	MOVE	T2,[IOWD CMDLL,CMDT]	;POINT TO POSSIBILITIES
	PUSHJ	P,FNDCMD	;FIND AND STORE COMMAND
	INTERR	(CER,Command Error,<JRST KILJOB>)
DOCM.2:	CAIN	CH,"-"		;SEE IF -XYZ
	PUSHJ	P,NO$		;YES--SET NOXYZ
	TXZN	F,F.CERR	;SEE IF ERROR
	JRST	DOCM.1		;NO--LOOP

;HERE AT END OF COMMAND--CLEAN UP LINE

DOCM.3:	TXZE	F,F.ECMD!F.EOF	;SEE IF END OF LINE
	JRST	DOCM.4		;YES--RETURN
	PUSHJ	P,GETWRD	;NO--GET NEXT WORD
	JRST	DOCM.3		;LOOP UNTIL DONE
DOCM.4:	SETZM	GETCH		;CLEAR CHARACTER GRABBER
	POPJ	P,		;RETURN
;ROUTINES TO HANDLE A LINE IN TTY.INI
;FILELC--CONDITIONAL BASED ON FIRST WORD BEING THIS TTY
;FILELN--ALWAYS
;FILELS--NEVER
;ALL RETURN AT END OF LINE

FILELC:	TXZ	F,F.PARN!F.NODL	;CLEAR THE PAREN INDICATOR

;TOP OF LOOP FOR LIST OF THE FORM (NODE_ID,NODE_ID):

FILE.0:	MOVE	T8,TRMNAM	;GET OUR EXPANDED TERMINAL NAME
	SETZ	T7,		;CAN'T USE OUR ASCII NAME UNLESS NODE MATCH

;GET A NODE NAME:

	MOVEI	T1,STR8BK	;POINT TO OUR STRING STORAGE
	PUSHJ	P,GETAS8	;GET THE NODE NAME

;SEE IF WE'VE GOT A LIST OF NODE_ID PAIRS:

	HLRZ	T1,STR8BK+.NSASL ;GET THE NUMBER OF BYTES READ
	JUMPE	T1,[CAIE CH,"("		;NONE.  ARE WE DOING A LIST?
		    JRST FILELS		;NOPE.  LOOPS LIKE GARBAGE
		    TXO  F,F.PARN!F.NODL;YEAH, SAY WE'RE DOING A LIST
		    JRST FILE.0]	;RESTART THE LOOP

;SEE IF IT REALLY LOOKS LIKE A NODE NAME:

	SETZ	WD,		;ASSUME QUOTED NODE NAME STRING
	MOVEI	T1,STR8BK	;POINT TO THE STRING STORAGE
	TXNN	F,F.QUOT	;WAS IT QUOTED?
	PUSHJ	P,GET826	;NO, CONVERT IT TO SIXBIT
	CAIE	CH,":"		;IS THIS ANY SORT OF
	CAIN	CH,"_"		; NODE NAME TERMINATOR?
	SKIPA			;YES, PROCESS THE NODE NAME
	JRST	FILE.3		;NO, GO DO A RAW TERMINAL NAME THEN
	CAIN	CH,":"		;IS IT A NEW FLAVOR TERMINATOR?
	JRST	[PUSHJ	P,GETCHA	;MAYBE, GET THE NEXT CHARACTER
		 CAIN	CH,":"		;IS IT "::"?
		 JRST	.+1		;YEAH, GO ON THEN
		 MOVEM	CH,REEAT	;NO, PUT THE CHARACTER BACK
		 JRST	FILE.3]		;AND TRY THE TERMINAL NAME
;GOT A NODE NAME. SEE IF IT MATCHES SOME FORM OF OUR NODE NAME OR "ALL"

	CAMN	WD,['ALL   ']	;UNIVERSAL NODE DESIGNATOR?
	JRST	FILE.1		;YES, THIS NODE NAME WINS
	MOVEI	T1,STR8BK	;NO, POINT TO THE NODE NAME
	MOVEI	T2,MYNODE	; AND MY NODE NAME
	PUSHJ	P,CMPS8		;ARE THEY THE SAME?
	 SKIPA			;NO, TRY THE NODE NUMBER IF THERE IS ONE
	JRST	FILE.1		;YES, GO LOOK FOR THE TERMINAL NAME
	MOVEI	T1,STR8BK	;POINT TO THE NODE NAME AGAIN
	MOVEI	T2,MYNUMB	; BUT THIS TIME, TRY MY NODE NUMBER
	PUSHJ	P,CMPS8		;ARE THEY THE SAME?
	 SKIPA			;NO, SKIP THIS LINE
	JRST	FILE.1		;YES, GO PROCESS THIS LINE

;IF NODE NAME DOESN'T MATCH, GO AHEAD AND EAT THE PORT ID JUST IN CASE WE'RE
;PROCESSING A LIST (WE'D LIKE TO SEE THE ",")

	MOVEI	T1,STR8BK	;POINT TO THE SCRATCH STORAGE
	PUSHJ	P,GETAS8	;GO READ THE PORT ID ANYWAY
	JRST	FILE.7		;THEN SEE IF WE'RE IN A LIST

;NODE NAMES MATCH.  READ THE TERMINAL NAME, AND MAKE SURE WE ONLY TRY TO MATCH
;THE NODE'S TTY NUMBER INSTEAD OF THE CENTRAL STATION'S

FILE.1:	MOVE	T8,TRMNNM	;GET THE NODE RELATIVE TERMINAL NAME
	MOVEI	T7,MYTERM	;AND POINT TO THE ASCII TERMINAL NAME STRING

;TOP OF LOOP FOR LISTS OF THE FORM NODE_(ID,ID,ID)

FILE.2:	MOVEI	T1,STR8BK	;POINT BACK AT OUR SCRATCH STORAGE
	PUSHJ	P,GETAS8	;GET THE NEXT PIECE OF ASCII
	MOVEI	T1,STR8BK	;POINT AT THE NEWLY FILLED BLOCK
	SETZ	WD,		;ASSUME IT WAS A QUOTED STRING
	TXNN	F,F.QUOT	;WAS IT?
	PUSHJ	P,GET826	;NO, CONVERT IT TO SIXBIT

;HERE IF NO NODE NAME, OR IF NODE NAMES MATCH.  SEE IF THE APPARENT TERMINAL
;NAME IS REALLY SOME MAGIC COMMAND:

FILE.3:	MOVSI	T1,-FILECL	;GET THE NUMBER OF MAGIC COMMANDS

FILE.4:	CAMN	WD,FILECM(T1)	;HAVE WE GOT A MATCH?
	JRST	@FILECD(T1)	;YES, GO DISPATCH IT
	AOBJN	T1,FILE.4	;NO, TRY THE NEXT ONE
;NOT A COMMAND, TRY TERMINAL LIST, TERMINAL NAME, ETC

	HLRZ	T1,STR8BK+.NSASL ;GET THE NUMBER OF BYTES READ
	JUMPE	T1,[CAIN CH,"("		;NONE?  IS THIS A LIST?
		    TXOE F,F.PARN	;YES, ALREADY DOING A LIST?
		    JRST FILELS		;NO, YES. PUNT OFF THIS LINE
		    JRST FILE.2]	;YES, NO. GO GET FIRST LIST ITEM
	SKIPE	WD		;ANY SIXBIT TERMINAL NAME?
	PUSHJ	P,XPNTTY	;YES, EXPAND THE NUMBER
	CAIE	CH,"-"		;ARE WE DOING A RANGE?
	JRST	FILE.5		;NO, TRY AN EXPLICIT TERMINAL NAME THEN
	TXNN	F,F.ANFL	;IS THIS AN ANF-10 NODE?
	JRST	FILELS		;NO, CAN'T DO LISTS ON DECNET/LAT PORT IDS

;WE'VE BEEN GIVEN A RANGE OF TTY NUMBERS OF THE FORM "TTYnn-TTYmm" or "TTYnn-mm"

	PUSHJ	P,CVTBIN	;YES, CONVERT THE NUMBER TO BINARY
	MOVE	T6,WD		;COPY THE LOWER BOUND
	PUSHJ	P,GETSIX	;GET THE NEXT BIT OF BINARY
	JUMPG	WD,[HLRZS WD		;IF DIGITS ONLY,
		    HRLI  WD,'TTY'	; MAKE IT TTYNN
		    JRST  .+1]		;AND CONTINUE
	PUSHJ	P,XPNTTY	;EXPAND THE TERMINAL NUMBER
	PUSHJ	P,CVTBIN	;AND CONVERT THE NUMBER TO BINARY
	MOVE	T5,WD		;COPY THE UPPER BOUND
	CAMGE	T5,T6		;ARE THEY IN REVERSE ORDER?
	EXCH	T6,T5		;YES, UNREVERSE THEM
	MOVE	WD,T8		;GET OUR CURRENT LINE NAME
	PUSHJ	P,CVTBIN	;PULL THE NUMBER OUT OF IT
	CAMG	T6,WD		;IS IT IN THE
	CAMGE	T5,WD		;SPECIFIED RANGE?
	JRST	FILE.7		;NO, SKIP IT
	JRST	FILE.6		;YES, WE WIN

;HERE IF JUST A GENERIC TTY DESIGNATOR.  SEE IF THE SIXBIT LINE ID MATCHES.
;IF NOT, COMPARE THE ASCII VERSIONS.  THE ASCII COMPARISON CAN ONLY HAPPEN
;WHEN WE'VE SEEN AN EXPLICIT NODE NAME MATCH.

FILE.5:	HLRZ	T1,STR8BK	;GET THE NUMBER OF BYTES FROM TTY.INI
	JUMPE	T1,FILE.7	;NOTHING?  TRY NEXT LIST ITEM
	CAMN	WD,T8		;DO WE MATCH LINE NAMES?
	CAILE	T1,6		;YES. IS IT BIGGER THAN A SIXBIT WORD THOUGH?
	SKIPA			;NO. TRY THE REGULAR NAME
	JRST	FILE.6		;YES, GO DO IT THEN
	MOVEI	T1,STR8BK	;NO, POINT AT THE STRING STORAGE
	SKIPE	T2,T7		;AND AT OUR PORT ID IF APPROPRIATE
	PUSHJ	P,CMPS8		;DO THEY MATCH?
	 JRST	FILE.7		;NO, PUNT IT
	SKIPA			;YES, SKIP "OTHER" ENTRY
;HERE IF "OTHER" FOR THE TERMINAL NAME:

FILEOT:	TXNN	F,F.ALIN	;SKIP IF WE'VE EVER DONE ANYTHING

;HERE IF WE WANT TO DO A LINE:

FILE.6:	PUSHJ	P,FILELN	;GO DO THE REST OF THE LINE
	TXO	F,F.ALIN	;SAVE WE'VE BEEN HERE
	POPJ	P,		;AND RETURN

;HERE IF THIS LINE DOESN'T MATCH.  SEE IF WE'RE DOING A LIST:

FILE.7:	CAIN	CH,","		;DOES IT LOOK LIKE A LIST?
	TXNN	F,F.PARN	;YES, DOES IT SMELL LIKE ONE TOO?
	JRST	FILELS		;NOPE.  SKIP THE REST OF THE LINE
	TXNN	F,F.NODL	;YES, ARE WE LOOPING ON IDS ONLY?
	JRST	FILE.2		;YES, GO TRY THE NEXT ID
	JRST	FILE.0		;NO, TRY FOR A NEW NODE NAME

;TABLE OF MAGIC COMMANDS THAT CAN OCCUR IN PLACE OF A TERMINAL NAME:

FILECM:	<SIXBIT	\OTHER\>	;CONNECT IF NOTHING MATCHED SO FAR
	<SIXBIT	\ALL\>		;APPLIES TO EVERYTHING WITH NODE MATCH
	<SIXBIT	\DETECT\>	;MATCH IF AUTOBAUD LINE
	<SIXBIT	\LINSPD\>	;MATCH IF SPEED MATCHES
	<SIXBIT	\OTHSPD\>	;MATCH IF OTHER THAN SPEED GIVEN
	<SIXBIT	\CONNECT\>	;CONNECT ANF NETWORK LINES
	<SIXBIT	\STOMP\>	;START THE TTY STOMPER
	<SIXBIT	\FRCLIN\>	;MATCH IF WE'RE FRCLIN
FILECL==.-FILECM		;NUMBER OF ENTRIES IN THIS TABLE

FILECD:	FILEOT			;DISPATCHES FOR ABOVE COMMANDS
	FILELN
	FILDET
	FILASP
	FILOSP
	FILCON
	STOMP
	FRCLIN
;HERE IF WE'VE GOT A TERMINAL MATCH.  PROCESS COMMANDS ON THIS LINE

FILELN:	TXZE	F,F.PARN	;DO COMMAND--SEE IF IN LIST
	JRST	[CAIN  CH,")"	;YES--SEE IF DONE YET
		 JRST  .+1	;YES--PROCEED
		 PUSHJ P,GETSIX	;NO--GET ANOTHER WORD
		 CAIN CH,.CHLFD	;CHECK FOR END-OF-LINE
		 JRST	FILE.8	;FOUND IT, STOP LOSING SEARCH
		 JUMPE CH,FILE.8 ;STOP ON END-OF-FILE TOO
		 JRST	.]	;AND LOOP
	PUSHJ	P,DOFILE	;DO THIS COMMAND
FILELS:	JUMPLE	CH,FILE.9	;IF END OF FILE, SKIP ON
	CAIN	CH,.CHLFD	;IF END OF LINE,
	JRST	FILE.9		;  SKIP ON
	PUSHJ	P,GETWRD	;ELSE, SKIP THIS LINE
	JRST	FILELS		; AND LOOP

;HERE WHEN TIME TO PROCEED ON THROUGH FILE

FILE.8:	PUSHJ	P,ERRFCR	;UNMATCHED LEFT PAREN -- COMPLAIN
FILE.9:	TXZ	F,F.ECMD	;CLEAR END OF COMMAND LINE
	TXZ	F,F.PARN	;CLEAR PAREN INDICATOR
	POPJ	P,		;RETURN

	; ROUTINES TO SCAN LINES BASED ON SPEEDS

SCNSPD:	; SCAN OFF THE SPEED PART
	PUSHJ	P,SKIPTV	;SKIP TO VALUE
	PUSHJ	P,GETSIX	;GET SIXBIT WORD
	MOVE	T2,[IOWD SPEEDL,SPEEDT]
	PUSHJ	P,FNDWRD	;FIND SPEED
	 SKIPA			; TRY SPEED UNKNOWN
	POPJ	P,		;RETURN
	MOVNI	T2,2		; USE -2 FOR ERROR, -1 FOR UNKNOWN
	MOVE	T3,['UNKNOW']	; SEE IF UNKNOWN
	AND	T3,T1		; GET TO RIGHT LENGTH
	CAMN	WD,T3		; SEE IF SAME
	 SETO	T2,		; YES, USE -1
	POPJ	P,
FILASP:	PUSHJ	P,SCNSPD	; GET THE SPEED INDICATED
	CAME	T2,MYSPD	; SAME AS MINE?
	 JRST	FILE.5		; NO, TRY ANOTHER LINE
	JRST	FILE.4		; YES, DO THIS LINE

FILOSP:	PUSHJ	P,SCNSPD	; GET THE SPEED
	CAMN	T2,MYSPD	; SAME AS MINE?
	 JRST	FILE.5		; YES, TRY ANOTHER
	JRST	FILE.4		; NO, SO DO THIS ONE

FILDET:	PUSHJ	P,SCNSPD	; GET SPEED
	CAME	T2,MYSPD	; SAME AS MINE?
	 JRST	FILE.5		; NO
	TXNN	F,F.ANSW	; ARE WE DOING .HELLO?
	 JRST	FILE.5		; NO
	JRST	FILE.4		; YES

;HERE IF "FRCLIN" SEEN IN TTY.INI

FRCLIN:	TXNN	F,F.FLN		;RUNNING ON FRCLIN?
	JRST	FILELS		;NO, IGNORE THIS COMMAND
	JRST	STMP.0		;GO LOOK FOR FRCLIN COMMANDS

;HERE TO FLAG STOMP SEEN IN TTY.INI

STOMP:	TXNN	F,F.FLN		;RUNNING ON FRCLIN?
	JRST	FILELS		;NO, IGNORE THIS COMMAND
	SETOM	TTWFLG		;FLAG THAT WE SHOULD START STOMPER
STMP.0:	TXNE	F,F.ECMD!F.EOF	;SEE IF END OF COMMAND
	POPJ	P,		;YES--RETURN
	PUSHJ	P,GETSIX	;GET NEXT WORD
	JUMPE	WD,STMP.1	;IF NULL, IGNORE IT
	MOVE	T2,[IOWD CMDS-CMDLL,CMDT+CMDLL]	;ALLOWABLE STOMP COMMANDS TABLE
	PUSHJ	P,FNDCMD	;FIND AND STORE COMMAND
	  JRST	ERRFCR		;ERROR IF MISSING
STMP.1:	CAIN	CH,"-"		;SEE IF - XYZ
	PUSHJ	P,NO$		;YES--SET NOXYZ
	TXZN	F,F.CERR	;SEE IF ERROR
	JRST	STMP.0		;NO--LOOP
	JRST	ERRFCR		;YES--SAY SO
;HERE TO CONNECT REMOTE NETWORK TERMINALS

FILCON:	TXNN	F,F.CTY		;RUNNING ON THE CTY?
	JRST	FILELS		;NO, IGNORE THE CONNECT COMMAND(S)
	MOVEI	T1,NETSLP	;GET SECONDS TO WAIT
	MOVEM	T1,FILCWT	;SET MAXIMUM WAITABILITY

;LOOP READING NODE_TTY PAIRS FROM TTY.INI

FILCO2:	PUSHJ	P,GETSIX	;GET A NODE ID
	CAIE	CH,"_"		;LOOK LIKE A NODE?
	JRST	FILELS		;NO, EAT THE LINE
FILCO3:	MOVE	T3,WD		;YEAH, POSITION
	PUSHJ	P,NDNAM		;AND TRY TO DECIPHER THE NODE ID
 	JUMPLE	T2,[SOSGE FILCWT	;TIME TO FLICK IT IN?
		JRST	FILCE3		;YES
		MOVEI	T1,1		;NO,
		SLEEP	T1,		;GIVE THE NETWORK A CHANCE TO COME UP
		JRST	FILCO3]		;AND TRY AGAIN
	MOVE	T6,T1		;SAVE REAL NODE NAME
	HRLZ	T8,T2		;SAVE NODE NUMBER
	PUSHJ	P,GETSIX	;READ IN THE TTY ID
	PUSHJ	P,XPNTTY	;FORCE INTO KNOWN FORMAT
	PUSHJ	P,CVTBIN	;AND CONVERT TO LINE NUMBER
	JUMPLE	T8,FILCO7	;IF UNKNOWN NODE, JUST IGNORE IT
	HRR	T8,WD		;MAKE NODE,,LINE ARG
	MOVEI	T7,2		;LENGTH OF NODE. ARG LIST BLOCK
FILCO4:	MOVE	WD,[.NDTCN,,T7]	;ARG POINTER TO
	NODE.	WD,		;TRY TO CONNECT NETWORK TERMINAL
	 JRST	[SOSGE	FILCWT		;WILLING TO WAIT AROUND A BIT?
		JRST	FILCE4		;TIMED OUT, JUST IGNORE IT
		MOVEI	WD,1		;ONE SECOND
		SLEEP	WD,		;WAIT TO GIVE THE NET A CHANCE
		JRST	FILCO4]		;TRY TO CONNECT AGAIN
	MOVX	T1,UU.PHS	;PHYSICAL ONLY
	MOVE	T2,WD		;RESULTANT TERMINAL NAME
	SETZ	T3,		;NO BUFFER RINGS
	OPEN	TTZ,T1		;IS TERMINAL IN USE?
	 JRST	FILCO7		;YES, DON'T FORCE AN INITIA ON IT
	MOVEI	T8,TTZ		;NO, TERMINAL IS FREE,
	IONDX.	T8,		;GET ITS UDX
	 JRST	FILCO7		;THIS JUST CAN'T FAIL
	RELEAS	TTZ,		;NO, RETURN IT TO MONITOR
	MOVE	T7,['INITIA']	;YOURS TRULY
	MOVE	T1,[2,,T7]	;FRCUUO ARG POINTER TO
	FRCUUO	T1,		;RUN INITIA ON NEW-FOUND LINE
	 JRST	FILCE6		;WIN A FEW, LOSE A FEW . . .

;SEE IF MORE TO DO

FILCO7:	CAIE	CH,.CHLFD	;END OF LINE?
	JUMPG	CH,FILCO2	;NO, MORE TO DO
	JRST	FILE.9		;MARK END OF COMMAND
;VARIOUS "CONNECT" COMMAND ERRORS OF NOTE

;NO SUCH NODE

FILCE3:	TTYSTR	[ASCIZ\% No such node "\]
	MOVE	T2,WD		;COPY OF THE NODE NAME
	PUSHJ	P,TYPSIX	;TYPE SIXBIT NODE NAME
	TTYSTR	[ASCIZ\" in CONNECT command\]
	TTYSTR	CRLF		;CAP OFF WITH A CRLF
	JRST	FILCO7		;CONTINUE WITH TTY.INI

;CAN'T CONNECT TO TERMINAL

FILCE4:	TTYSTR	[ASCIZ\% Can't CONNECT to \]
	PUSHJ	P,FILCET	;TYPE NODE_TTY
	TTYSTR	CRLF		;CAP OFF WITH A CRLF
	JRST	FILCO7		;CONTINUE WITH TTY.INI

;CAN'T FORCE AN INITIA

FILCE6:	TTYSTR	[ASCIZ\% Can't force an INITIA on \]
	PUSHJ	P,FILCET	;LIST THE NODE_TTY
	TTYSTR	[ASCIZ\ (\]
	MOVE	T2,WD		;GET -10'S TTY NAME
	PUSHJ	P,TYPSIX	;TYPE THE RESULTANT TTY NAME
	TTYCHR	")"		;END PARENTHESIZED TTY NAME
	TTYSTR	CRLF		;CAP OFF WITH A CRLF
	JRST	FILCO7		;CONTINUE WITH TTY.INI

;TYPE NODE_TTY

FILCET:	MOVE	T2,T6		;COPY OF RESULTANT NODE NAME
	PUSHJ	P,TYPSIX	;LIST SIXBIT NODE NAME
	TTYSTR	[ASCIZ\_TTY\]	;SEPARATE NODE NAME FROM TTY NAME
	HRRZ	T1,T8		;GET NODE LINE NUMBER
	PJRST	TYPOCT		;AND LIST OCTAL LINE NUMBER
;SUBROUTINE TO HANDLE LINE OF COMMAND FILE
;CALLED AFTER FIRST WORD OF LINE IS FOR US

DOFILE:	TXNE	F,F.ECMD!F.EOF	;SEE IF END OF COMMAND
	POPJ	P,		;YES--RETURN
	PUSHJ	P,GETSIX	;GET NEXT WORD
	JUMPE	WD,DOFI.1	;IF NULL, IGNORE IT
	MOVE	T2,[IOWD CMDL,CMDT]	;FULL COMMAND TABLE
	PUSHJ	P,FNDCMD	;FIND AND STORE COMMAND
	  JRST	ERRFCR		;ERROR IF MISSING
DOFI.1:	CAIN	CH,"-"		;SEE IF - XYZ
	PUSHJ	P,NO$		;YES--SET NOXYZ
	TXZN	F,F.CERR	;SEE IF ERROR
	JRST	DOFILE		;NO--LOOP

ERRFCR:	INTWRN	(FCR,File command error)
	OUTSTR	CRLFM
	POPJ	P,0
SUBTTL	SUBROUTINE TO IDENTIFY AND SAVE COMMAND

;CALL:	MOVE	T2,[IOWD LENGTH,LIST]
;	PUSHJ	P,FNDCMD
;NON-SKIP RETURN IF ERROR
;SKIP RETURN IF DONE
;VALUES CAN BE SEPARATED BY

FNDCMD:	MOVE	T7,T2		;SAVE A COPY OF LIST
FNDC.1:	PUSHJ	P,FNDWRD	;LOOK WD UP IN TABLE
	  JRST	[XOR   WD,['NO    ']
		 TLNE  WD,777700  ;SEE IF NOXYZ
		 POPJ  P,	;NO--ERROR
		 PUSHJ P,NO$	;YES--SET FLAG
		 LSH   T1,^D12	;ADJUST MASK
		 LSH   WD,^D12	;ADJUST REST OF WORD
		 MOVE  T2,T7	;RESTORE LIST OF WORDS
		 JRST  FNDC.1]	;AND TRY AGAIN
	ADDI	T2,CMDP-CMDT+1(T7);POINT TO THE PROCESSOR
	SKIPGE	T1,(T2)		;GET PROCESSOR
	HRRZM	T1,JUMPPR	;IF -1,,ADDR, GIVES FINAL ROUTINE
	TXNE	F,F.NO		;SEE IF NO XXX
	JUMPL	T1,CPOPJ	;IF ROUTINE, ERROR
	HLRE	T2,T1		;GET POSSIBLE VALUE
	JUMPLE	T2,FNDC.2	;IF JUMP/ROUTINE, GO HANDLE
	TXZE	F,F.NO		;SEE IF NO XXX
	TRC	T2,3		;YES--INTERCHANGE 1-2
	CAIE	T2,1		;SEE IF YES
	CAIN	T2,2		;SEE IF NO
	MOVEM	T2,(T1)		;YES--STORE VALUE
	CAIG	T2,3		;SEE IF BIT VALUE
	JRST	CPOPJ1		;YES--ALL OK
	CAIE	T2,4		;SEE IF DECIMAL VALUE
	POPJ	P,		;NO--MUST BE ERROR
	PUSH	P,T1		;SAVE LOCATION
	PUSHJ	P,SKIPTV	;SKIP TO VALUE
	PUSHJ	P,GETDEC	;GET DECIMAL VALUE
	POP	P,T2		;RESTORE LOCATION
	HRROM	T1,(T2)		;STORE VALUE
	JRST	CPOPJ1		;GIVE GOOD RETURN
FNDC.2:	TLNN	T1,-1		;SEE IF 0,,ADDR
	PUSHJ	P,(T1)		; CALL ROUTINE
	TXZE	F,F.CERR	;SEE IF COMMAND ERROR
	POPJ	P,		;YES--GIVE ERROR
	JRST	CPOPJ1		;NO--GIVE SUCCESS
SUBTTL	DEFINE SYSTEMS WHICH NEED SPECIAL SET-UP

	DEFINE	APRS,<
	X 546
;OTHERS MAY BE ADDED--EACH REQUIRES A SP MACRO
>



;DEFINE TABLE OF APR S/N TO PROCESS

	DEFINE	X(A),<
			XLIST
			EXP A
			LIST
>


	RADIX	10
APRTAB:	APRS
APRTBL==.-APRTAB
	RADIX	8



;DEFINE LIST OF TTY NAME TABLE AND PROCESSING TABLE

	DEFINE	X(A),<
			XLIST
			XWD TT'A,JJ'A
			LIST
>

APRTBV:	APRS
	XWD	TTXXX,JJXXX	;CATCHALL
SUBTTL	SYSTEM TABLES

;SYSTEM 546 TABLES
	DEFINE	SP546,<
>

;CATCHALL TABLES FOR UNRECOGNIZED SYSTEMS
	DEFINE	SPXXX,<
>
;PEEL OUT THE TTY NAMES

T.==0

	DEFINE	X(A),<
	XLIST
TT'A:	SP'A
	0
	IFG	.-TT'A-T.,<T.==.-TT'A>
	LIST
>

	DEFINE	Y(A,B,C),<EXP SIXBIT /A/>

	APRS
	X XXX

SPTABL==T.		;SAFETY FACTOR FOR LOOP


;PEEL OUT JUMP TABLES

	DEFINE	X(A),<	XLIST
JJ'A:	SP'A
	LIST>

	DEFINE	Y(A,B,C),<XWD C,B>

	APRS
	X XXX
SUBTTL	STANDARD COMMAND TABLES

;FOR EACH KEYWORD, DEFINE LOCATION OF
;PROCESSOR AND WHETHER OR NOT COMMAND CAN GIVE
;W	KEY,PROCESSOR,X,Y
;		X=C IF COMMAND ALLOWED
;		  S IF ALLOWED ON STOMP OR FRCLIN
;		Y=J IF CALLED WITH JRST
;		  B IF SET A BIT
;		  I IF INVERT (OFF) A BIT
;		  D IF DECIMAL NUMBER

	DEFINE	CMDLST(J,B,I,D),<

;;FIRST THE COMMANDS ET AL

W	H,HELP,C,
W	HELP,HELP,C,
W	KSYS,FLKSYS,C,B
W	NAME,FLNAME,C,I
W	NO,NO$,C,
W	NORUN,GEN,C,J
W	NOTICE,FLNOTC,C,B
W	STRUCTURES,FLSTR,C,B
W	SYSTEM,SYSIN$,C,
W	STOMP,STOMP$,C,
W	TEXT,FLTEXT,C,B
W	UN,NO$,C,

W	ACCOUNT,REDACT,S,
W	AUTOMATIC,OPSER1,,J
W	CHKPNT,CHKPNT,,J
W	CRASH,FILEX,,J
W	DAEMON,DAEMON,,J
W	GALOPR,GALOPR,,J
W	LOCATE,LOCAT,,D
W	OMOUNT,OMOUNT,,J
W	OPSER,OPSER,,J
W	SYSDLT,SYSDPY,,J
W	SYSDPA,SYSDPY,,J
W	SYSDPB,SYSDPY,,J
W	SYSDPY,SYSDPY,,J
W	SYSHZL,SYSDPY,,J
W	SYSV52,SYSDPY,,J
W	SYSV61,SYSDPY,,J
W	SYSVFT,SYSDPY,,J
W	SYSVSO,SYSDPY,,J
;;THEN THE TTY PARAMETERS

W	ALTMODE,ALT,,I
W	BLANKS,BLANK,,I
W	CRLF,CRLF,,I
W	DEBREAK,DEBR,,B
W	DEFER,ECHDEF,,B
W	DIALOUT,DIAL$,,
W	DISPLAY,DISP,,B
W	ECHO,ECHO,,I
W	EIGHTBIT,EIGHT,,B
W	ELEMENT,ELEM,,D
W	ESCAPE,ESCCMD,,
W	FILL,FILL,,D
W	FORM,FORM,,B
W	GAG,GAG,,I
W	HDX,HDX,,B
W	IDLEDISC,IDLE,,D
W	LC,LC,,I
W	LENGTH,LENGTH,,D
W	PAGE,PAGCMD,,
W	QUOTE,QUOTE,,B
W	RCVSPEED,RCV$,,
W	REMOTE,REM,,B
W	RTCOMPATABILITY,RTCOMP,,B
W	SBELL,SBELL,,B
W	SETTTY,FLSET,C,I
W	SLAVE,SLAVE,,B
W	SPEED,SPEED$,,
W	SSIZE,SSIZE,,D
W	SSTOP,SSTOP,,B
W	STOP,STOP,,B
W	TABS,TAB,,B
W	TAPE,TAPE,,B
W	TERMINET,TRMNET,C,
W	TIDY,TIDY,,B
W	TTY,FLTTY,C,B
W	TYPE,TYPE$,,
W	UC,LC,,B
W	UNPAUSE,UNPCMD,,
W	WIDTH,WIDTH,,D
W	XMTSPEED,XMT$,,
W	XONXOFF,XONXOF,,B
>
	XALL
	DEFINE	W($KEY,$PROC,$COM,$JUMP),<
IFIDN	<$COM><C>,<
	EXP	<SIXBIT /$KEY/>	; $KEY
>>

	;TABLE OF COMMAND NAMES
CMDT:	CMDLST	(-1,1,2,4)
CMDLL==.-CMDT

	DEFINE	W($KEY,$PROC,$COM,$JUMP),<
IFIDN	<$COM><S>,<
	EXP	<SIXBIT /$KEY/>	; $KEY
>>
	CMDLST	(-1,1,2,4)
CMDS==.-CMDT

	DEFINE	W($KEY,$PROC,$COM,$JUMP),<
IFDIF	<$COM><C>,< IFDIF <$COM><S>,<
	EXP	<SIXBIT /$KEY/>	; $KEY
>>>
	CMDLST	(-1,1,2,4)
CMDL==.-CMDT


	DEFINE	W($KEY,$PROC,$COM,$JUMP),<
IFIDN	<$COM><C>,<
	XWD	$JUMP,$PROC		; $KEY
>>

	;LIST OF PROCESSORS
CMDP:	CMDLST	(-1,1,2,4)

	DEFINE	W($KEY,$PROC,$COM,$JUMP),<
IFIDN	<$COM><S>,<
	XWD	$JUMP,$PROC		;$KEY
>>
	CMDLST	(-1,1,2,4)

	DEFINE	W($KEY,$PROC,$COM,$JUMP),<
IFDIF	<$COM><C>,< IFDIF <$COM><S>,<
	XWD	$JUMP,$PROC		;$KEY
>>>
	CMDLST	(-1,1,2,4)
	SALL

SUBTTL	ROUTINES FOR VARIOUS COMMANDS

SUBTTL	NO COMMAND HANDLER

NO$:	TXOE	F,F.NO		;SET NO FLAG
	TXO	F,F.CERR	;IF ON, ERROR
	POPJ	P,		;RETURN

SUBTTL	RCV/XMT SPEED COMMAND HANDLER

SPEED$:	MOVEI	T7,3		;BOTH SPEEDS
	JRST	SPEED		;GO HANDLE
RCV$:	MOVEI	T7,2		;REC SPEED
	JRST	SPEED		;GO HANDLE
XMT$:	MOVEI	T7,1		;XMT SPEED
SPEED:	PUSHJ	P,SKIPTV	;SKIP TO VALUE
	PUSHJ	P,GETSIX	;GET SIXBIT WORD
	MOVE	T2,[IOWD SPEEDL,SPEEDT]
	PUSHJ	P,FNDWRD	;FIND SPEED
	  TXO	F,F.CERR	;ERROR IF UNKNOWN
	TXZE	F,F.NO		;SEE IF NO
	TXO	F,F.CERR	;YES--COMMAND ERROR
	TRNE	T7,2		;SEE IF RCV
	HRROM	T2,RCV		;YES
	TRNE	T7,1		;SEE IF XMT
	HRROM	T2,XMT		;YES
	TRNE	T7,2		; IF RECEIVE SPEED
	 HRRZM	T2,MYSPD	; CHANGE MYSPEED
	POPJ	P,		;RETURN

SPEEDT:	SIXBIT	/0/
	SIXBIT	/50/
	SIXBIT	/75/
	SIXBIT	/110/
	SIXBIT	/134/
	SIXBIT	/150/
	SIXBIT	/200/
	SIXBIT	/300/
	SIXBIT	/600/
	SIXBIT	/1200/
	SIXBIT	/1800/
	SIXBIT	/2400/
	SIXBIT	/4800/
	SIXBIT	/9600/
	SIXBIT	/EXTA/
	SIXBIT	/EXTB/
SPEEDL==.-SPEEDT
SUBTTL	PAGE COMMAND HANDLER

PAGCMD:	PUSHJ	P,SKIPTV	;SKIP TO VALUE IF ANY
	CAIN	CH,":"		;SEE IF VALUE
	JRST	PAGCM1		;YES--SETTING NUMBER
	CAIL	CH,"0"		;OR
	CAILE	CH,"9"		; DECIMAL
	JRST	PAGCM2		;NO--MUST JUST BE ON/OFF
PAGCM1:	TXZE	F,F.NO		;NUMBER
	TXO	F,F.CERR	;NO IS ERROR
	PUSHJ	P,GETDEC	;GET DECIMAL PAGE COUNT
	HRROM	T1,PAGE		;SET PAGE NUMBER
PAGCM2:	TXZE	F,F.NO		;ON/OFF--SEE IF OFF
	TDZA	T1,T1		;NO SO OFF
	MOVEI	T1,1		;ELSE ON
	HRROM	T1,PAGEON	;SET FOR PAGE FLAG
	POPJ	P,		;RETURN

SUBTTL	DIAL COMMAND HANDLER

DIAL$:	PUSHJ	P,SKIPTV	;SKIP TO VALUE
	SETOM	DIAL		;FILL WITH MARKERS
	SETOM	DIAL+1		;..
	MOVE	T7,[POINT 4,DIAL]
	MOVEI	T6,^D18		;PROTECTIVE COUNT
DIAL.1:	PUSHJ	P,GETCHA	;GET NEXT DIGIT
	CAIE	CH,"	"	;SEE IF TAB
	CAIN	CH," "		; OR SPACE
	JRST	DIAL.1		;YES--DISCARD
	CAIN	CH,"-"		;SEE IF SEPARATOR
	JRST	DIAL.1		;YES--DISCARD
	CAIE	CH,"("		;SEE IF
	CAIN	CH,")"		; AREA CODE SEPARATOR
	JRST	DIAL.1		;YES--DISCARD
	CAIN	CH,"*"		;SEE IF DELAY MARKER
	JRST	[MOVEI CH,16	;YES--INDICATE THAT
		 JRST  DIAL.2]	;AND STORE
	CAIL	CH,"0"		;SEE IF
	CAILE	CH,"9"		; DIGIT
	POPJ	P,		;NO--MUST BE END
DIAL.2:	IDPB	CH,T7		;STORE DIGIT
	SOJG	T6,DIAL.1	;SEE IF OVERFLOW
	TXO	F,F.CERR	;YES--SET ERROR
	SETZM	DIAL		;AND CLEAR
	SETZM	DIAL+1		; RESULT
	POPJ	P,		;RETURN
SUBTTL	ESCAPE COMMAND HANDLER

ESCCMD:	MOVX	T1,.CHESC	;GET THE DEFAULT ESCAPE CHARACTER
	PUSH	P,[ESCAPE]	;GET THE STORAGE ADDRESS
	PJRST	UNPC.0		;CALL THE COMMON CODE BELOW

SUBTTL	UNPAUSE COMMAND HANDLER

UNPCMD:	MOVEI	T1,.CHCNQ	;GET THE DEFAULT FOR THIS GUY
	PUSH	P,[UNPAUSE]	;GET THE STORAGE ADDRESS

UNPC.0:	TXZE	F,F.NO		;DID HE SAY NO?
	JRST	UNPC.1		;YES, JUST USED THE DEFAULT
	PUSHJ	P,GCHVAL	;NO, GO GET THE CHARACTER VALUE
	  TXOA	F,F.CERR	;ERROR, DON'T STORE
UNPC.1:	HRROM	T1,@(P)		;OK, STORE THE CHARACTER
	POP	P,(P)		;CLEAN UP THE STACK
	POPJ	P,		;RETURN

SUBTTL	ACCOUNT COMMAND HANDLER

REDACT:	TXZN	F,F.NO		;DID HE SAY NO?
	JRST	REDA.1		;NO, GET THE STRING VALUE
	SETZM	ACTSTR		;YES, THEN
	MOVE	T1,[ACTSTR,,ACTSTR+1] ; ZERO
	BLT	T1,ACTSTR+7	;  ANY LEFTOVER STUFF
REDA.1:	MOVE	T1,[POINT 7,ACTSTR] ;POINT TO THE STRING STORAGE
	MOVEI	T2,^D39		;GET THE MAXIMUM LENGTH (NOT INCL NULL)
	PUSHJ	P,GSTARG	;GET THE STRING ARGUMENT
	  TXO	F,F.CERR	;ERROR, SO LITE THE BIT
	POPJ	P,		;RETURN
SUBTTL	ROUTINE TO SETUP TTY

DOTTYS:	SKIPN	T1,FLSET	;SEE IF
	TXNN	F,F.LOGI	; (IF DIDN'T SAY, AND LOGGED IN, ASSUME NO)
	TRNE	T1,1		; USER SAID NOSETTTY
	JRST	DOTT.2		;RIGHT--SKIP THIS
	MOVE	T1,FFAPPN	;GET [1,2]
	CHGPPN	T1,		;CHANGE TO IT FOR
	  JFCL			; PRIVILEGED TRMOP.S
	MOVSI	T7,-DOTTYU	;SET LOOP LENGTH
	TXNE	F,F.LOGI	;JOB LOGGED IN
	MOVSI	T7,-DOTTLG	;YES, DON'T ALLOW SPECIAL THINGS FROM TTY.INI
DOTT.1:	MOVE	T1,[3,,T2]	;POINTER FOR TRMOP
	HLRZ	T2,DOTTYT(T7)	;GET TRMOP FUNCTION
	CAIL	T2,1000		;SEE IF READ TRMOP.
	ADDI	T2,.TOSET	;YES--CHANGE TO SET
	MOVE	T3,TERNUM	;GET TERMINAL NUMBER
	HRRZ	T5,DOTTYT(T7)	;GET POINTER TO VALUE
	HLRZ	T4,DOTTYT(T7)	;GET TRMOP FUNCTION
	CAIN	T4,.TOTRM	;IS IT .TOTRM?
	 SKIPA	T4,(T5)		;YES--GET FULL WORD
	HRRZ	T4,(T5)		;GET VALUE IF ANY
	SKIPE	(T5)		;UNLESS NULL,
	TRMOP.	T1,		; SET VALUE
	  JFCL			;IGNORE ERRORS
	AOBJN	T7,DOTT.1	;LOOP FOR ALL FUNCTIONS
	MOVE	T1,MYPPN	;RECOVER ORIGINAL PPN
	CHGPPN	T1,		;CHANGE BACK TO IT
	  JFCL			;(IGNORE IF CAN'T)

	MOVE	T1,[4,,T2]	;POINTER FOR TRMOP
	MOVEI	T2,.TODSC	;INDICATE CALL
	MOVE	T3,TERNUM	;GET OUR NUMBER
	MOVE	T4,DIAL		;GET FIRST HALF OF NUMBER
	SKIPE	T5,DIAL+1	;IF SET,
	TRMOP.	T1,		; MAKE CALL
	  JFCL			;IGNORE ERRORS
	SKIPE	T1,SLAVE	;DID WE SET/CLEAR SLAVE?
	 TRNN	T1,1		;YES, DID WE SET IT?
	  SKIPA			;NO, GO ON
	   JRST	DOTT0A		;YES, DON'T TYPE ANYTHING
DOTT.2:	MOVE	T1,[2,,T2]	;SETUP A TRMOP. ARGUMENT BLOCK
	MOVX	T2,.TOAPC	;  TO FIND OUT WHAT KIND OF
	MOVE	T3,TERNUM	;  LINE THIS IS
	TRMOP.	T1,		;GO ASK
	 MOVX	T1,.TOHWD	;ASSUME HARD WIRED
	CAIE	T1,.TODSD	;IS THIS A DATASET LINE?
	  JRST	DOTT.0		;NO, GO CHECK FOR SLAVE LINE
	MOVX	T2,.TODSS	;YES, SETUP A NEW TRMOP. CALL
	MOVE	T1,[2,,T2]	;  TO SEE IF WE HAVE CARRIER
	TRMOP.	T1,		;  ON THIS LINE
	  JRST	DOTT.0		;ASSUME YES
	JUMPL	T1,DOTT.0	;YES, GO AHEAD WITH THE BANNER
DOTT0A:	MOVEI	T1,TI		;YES, GET THE TERMINAL'S CHANNEL NUMBER
	RESDV.	T1,		;GET RID OF THE TERMINAL
	  JFCL			;NO BIG DEAL IF THIS FAILS
	SETOM	SILENC		;MAKE SURE WE DON'T TRY TO TYPE ANYTHING
	POPJ	P,		;RETURN QUIETLY
DOTT.0:	PUSHJ	P,SIGNON	;ISSUE SIGNON MESSAGE
	MOVE	T1,FLKSYS	;SEE IF
	TRNE	T1,1		; USER WANTS KSYS
	PUSHJ	P,TYKSYS	;YES--ISSUE IT
	MOVE	T1,FLTEXT
	TRNE	T1,1
	PUSHJ	P,TEXT
	MOVE	T1,FLSTR	;SEE IF STRUCT
	TRNE	T1,1		; ..
	PUSHJ	P,STRUCT	;YES--TYPE STRUCTURE NOTES
	MOVE	T1,FLTTY	;GET TTY FLAG
	TRNE	T1,1		;SEE IF SET
	PUSHJ	P,TYPTTY	;YES--TYPE TTY SETTINGS
	MOVE	T1,FLNOTC	;GET NOTICE FLAG
	TRNE	T1,1		;SEE IF SET
	PUSHJ	P,NOTICE	;YES--TYPE NOTICE.TXT
	POPJ	P,		;RETURN
SUBTTL	ROUTINE TO SETUP TTY "TYPE"

TYPE$:	TXZE	F,F.NO		;TEST AND ZERO NO BIT
	 JRST	[SETZ	WD,	;BIT ON--CLEAR WD
		 JRST	TYPE$1]	;AND WRAPUP
	PUSHJ	P,SKIPTV	;SKIP TO VALUE
	PUSHJ	P,GETSIX	;GET TERMINAL NAME
	JUMPN	WD,TYPE$1	;WAS ANYTHING SPECIFIED?
	INTWRN	(NTS,No type specified)
	POPJ	P,		;OK RETURN
TYPE$1:	MOVEM	WD,TYPE		;STORE TERMINAL TYPE
	POPJ	P,		;OK RETURN
SUBTTL	TTY CONTROL LIST ROUTINE
;FORMAT IS XWD TRMOP.,VALUE

DOTTYT:
	.TOELE,,ELEM	;TTY ELEMENT
	.TOTRM,,TYPE	;TTY TYPE:XXXXXX
	.TORSP,,RCV	;TTY RCV:XX
	.TOTSP,,XMT	;TTY XMT:XX
	.TOLCP,,ECHO	;TTY NO ECHO
	.TODEM,,ECHDEF	;TTY DEFER
	.TOWID,,WIDTH	;TTY WIDTH:N
	.TOLNB,,LENGTH	;TTY LENGTH:N
	.TOSSZ,,SSIZE	;TTY STOP:N
	.TOSST,,SSTOP	;TTY SSTOP
	.TOSTO,,STOP	;TTY STOP
	.TOFLC,,FILL	;TTY FILL:N
	.TOLCT,,LC	;TTY LC
	.TOTAB,,TAB	;TTY TAB
	.TOFRM,,FORM	;TTY FORM
	.TONFC,,CRLF	;TTY NO CRLF
	.TOSND,,GAG	;TTY NO GAG
	.TOSBL,,SBELL	;TTY SBELL
	.TODIS,,DISP	;TTY DISPLAY
	.TOTAP,,TAPE	;TTY TAPE
	.TOPAG,,PAGEON	;TTY PAGE
	.TOPSZ,,PAGE	;TTY PAGE:N
	.TOBLK,,BLANK	;TTY NO BLANKS
	.TOALT,,ALT	;TTY ALT
	.TODBK,,DEBR	;TTY DEBREAK
	.TOTDY,,TIDY	;TTY TIDY
	.TORTC,,RTCOMP	;TTY RTCOMP
	.TORMT,,REM	;TTY REMOTE (NOT LOCAL)
	.TOXNF,,XONXOFF	;TTY XONXOFF
	.TOUNP,,UNPAUSE	;TTY UNPAUSE
	.TOESC,,ESCAPE	;TTY ESCAPE
	.TO8BT,,EIGHT	;TTY EIGHTBIT
	.TOQOT,,QUOTE	;TTY QUOTE
	.TOMXT,,IDLE	;TTY IDLEDISC

DOTTLG==.-DOTTYT

;THE FOLLOWING ARE NOT SETTABLE BY THE USER, FOR TYPEOUT ONLY, AND MUST BE LAST

	.TOSLV,,SLAVE	;TTY SLAVE
	.TOHLF,,HDX	;TTY HDX (HALF-DUPLEX)

DOTTYU==.-DOTTYT
SUBTTL	ROUTINE TO KJOB IF SYSTEM GOING DOWN

REPEAT 0,<	;NO LONGER NEEDED
KSYS:	MOVE	T1,[3,,['KJO',,0
			IOWD KSYSL,KSYSC]]
	TMPCOR	T1,		;WRITE  KJOB COMMAND TO TMPCOR
	  JRST	.+2		;CAN'T--TRY DISK
	JRST	KJOB1		;DID--CALL KJOB AT CCL ENTRY

;HERE WHEN CAN'T DO IT IN TMPCOR--TRY THE DISK

	OPEN	IO,DSKOPN	;OPEN DISK CHANNEL
	  BOMB$		;GIVE UP IF CAN'T
	MOVE	T1,JOBN		;GET FILE NAME
	MOVEI	T4,3		;BY TIME-HONORED NAME MAKER
KSYSFN:	IDIVI	T1,^D10		;GET NEXT DIGIT
	ADDI	T2,'0'		;CONVERT TO SIXBIT
	LSHC	T2,-6		;CONCATENATE WITH ANSWER
	SOJG	T4,KSYSFN	;LOOP UNTIL DONE WITH 3 DIGITS
	HRRI	T3,'KJO'	;APPEND FILE CODE
	MOVSI	T4,'TMP'	;GET EXTENSION
	SETZB	T5,T6		;CLEAR DIRECTORY
	ENTER	IO,T3		;MAKE  FILE
	  BOMB$		;GIVE UP IF ILLEGAL
	OUTPUT	IO,[IOWD KSYSL,KSYSC
			0]
	RELEASE	IO,		;COMPLETE OPERATION

;HERE WHEN CCL FILE WRITTEN AND TIME TO CALL KJOB

KJOB1:	MOVE	T2,[SIXBIT /KJOB/]  ;GET CUSP NAME
	JRST	CUSP1		;RUN IT AT CCL ENTRY

DSKOPN:	1B0+17		;PHYSICAL DISK OPEN
	'DSK   '
	0

KSYSC:	ASCIZ	\KJOB KSYS.LOG=/W/B
\
KSYSL==.-KSYSC
>; END REPEAT 0
SUBTTL	SPECIAL PROCESSORS

;HERE TO START UP FILEX UNDER [10,1] TO SAVE CRASH

SUBTTL	FILEX PROCESSOR
FILEX:	MOVX	T2,%LDCRP	;GET NUMBER OF CRASH STORAGE AREA
	GETTAB	T2,		;FROM THE MONITOR
	  MOVE	T2,[10,,1]	;(FOR PRE 5.3)
	TLNE	T2,777760	;HACK TO GET AROUND 5.2 BUG
	MOVE	T2,[10,,1]	;WHICH GAVE JUNK IN 16,,16
	MOVE	T4,[SIXBIT /FILEX/]  ;GET CUSP NAME
	JRST	LOGCSP		;GO LOGIN AND RUN CUSP

SUBTTL	OMOUNT PROCESSOR
OMOUNT:	MOVE	T4,[SIXBIT /OMOUNT/]  ;GET CUSP NAME
	JRST	CUSP12		;GO LOGIN AND RUN IT

SUBTTL	DAEMON PROCESSOR
DAEMON:	MOVE	T4,[SIXBIT /DAEMON/]  ;GET THE CUSP NAME
	JRST	CUSP12		;GO LOGIN AND RUN IT

SUBTTL	CHKPNT PROCESSOR
CHKPNT:	MOVE	T4,[SIXBIT /CHKPNT/]  ;GET THE CUSP NAME
	JRST	CUSP12		;GO LOGIN AND RUN IT

SUBTTL	OPSER PROCESSOR
OPSER1:	TXO	F,F.CCL		;FORCE CCL ENTRY POINT
OPSER:	MOVE	T4,[SIXBIT /OPSER/]  ;GET CUSP NAME
	JRST	CUSP12		;LOGIN AND RUN IT

SUBTTL	PRINTR PROCESSOR
PRINTR:	MOVE	T4,[SIXBIT /PRINTR/]  ;GET THE CUSP NAME
	JRST	CUSP12		;AND LOGIN AND START IT

SUBTTL	GALOPR PROCESSOR
GALOPR:	TXO	F,F.CCL!F.IPCQ	;FORCE CCL RUN AND LARGE IPCF QUOTAS
	MOVSI	T4,'OPR'	;NAME OF PROGRAM
	JRST	CUSP12		;LOGIN AND START IT

SUBTTL	SYSDPY PROCESSOR

DEFINE	DPYNAM,<
        X VT05A,SYSDPA
	X VT05B,SYSDPB
	X VT06 ,SYSDPY
	X VT50 ,SYSV50
	X VT52 ,SYSV52
	X VT61 ,SYSV61
	X VK100,SYSANS		;GIGI
	X VT100,SYSANS
	X VT101,SYSANS
	X VT102,SYSANS
	X VT103,SYSANS
	X VT125,SYSANS
	X VT180,SYSANS
	X VT185,SYSANS
	X VT220,SYSANS
	X VT240,SYSANS
;NON-STANDARD TERMINAL TYPES, MONITOR DOESN'T KNOW ABOUT THEM.
	X HAZELT,SYSHZL		;HAZELTINE 2000
	X DELTA,SYSDLT		;DELTA DATATERM
	X VB10C,SYSVBC		;VB10C. HAH!
>

DEFINE X(TERM,PROG),<SIXBIT \TERM\>
DPYTRM:	DPYNAM
DPYOFF=.-DPYTRM

DEFINE X(TERM,PROG),<SIXBIT \PROG\>
DPYPRG:	DPYNAM

	PURGE X
DPYTAB:	IOWD DPYOFF,DPYTRM

SYSDPY:	MOVE	T1,[2,,T2]	;ARG FOR TRMOP
	MOVEI	T2,.TOTRM	;TERMINAL TYPE
	SETO	T3,		;MYSELF
	TRMOP.	T1,		;ASK
	 SETZ	T1,		;GIVE A NONEXISTANT TERMINAL TYPE
	MOVE	T2,DPYTAB	;AOBJN POINTER TO TERMINAL TYPE TO SYSDPY NAME
	CAME	T1,(T2)		;IS THIS THE RIGHT NAME?
	AOBJN	T2,.-1		;NO, TRY NEXT NAME
	SKIPL	T2		;DID WE GET A NAME?
	 SKIPA	T4,[SIXBIT \SYSV52\] ;NO, RUN A DEFAULT VERSION
	MOVE	T4,DPYOFF(T2)	;GET PROGRAM NAME TO RUN
        TXO	F,F.LOGX	;FLAG OK TO RUN UNDER ANY NUMBER
SUBTTL	LOGIN TO 1,2 AND RUN CUSP NAMED IN T4

CUSP12:	PUSH	P,T4		;SAVE T4
	PUSHJ	P,LOGI12	;LOG INTO 1,2 TO DISPLAY PRIVILEGED INFORMATION
	JRST	CUSPXX		;GO FINISH RUNNING CUSP

;HERE TO DO ARBITRARY LOGIN TO (T2) AND RUN CUSP IN (T4)

LOGCSP:	PUSH	P,T4		;SAVE COPY OF CUSP NAME
	PUSHJ	P,LOGIN$	;GO DO LOGIN

CUSPXX:	POP	P,T2		;RESTORE T2

SUBTTL	START UP CUSP NAMED IN T2

CUSP:	PUSH	P,T2		;SAVE NAME
	TTYSTR	[ASCIZ /.R /]
	PUSHJ	P,TYPSIX	;TYPE NAME
	TTYSTR	CRLFM
	POP	P,T2		;RECOVER NAME
	TXNN	F,F.CCL		;SEE IF FORCED CCL ENTRY POINT
	TLZA	T1,-1		;CLEAR RUN OFFSET
CUSP1:	MOVSI	T1,1		;SET RUN OFFSET FOR CCL ENTRY
	MOVEM	T2,RUNBLK+1	;SAVE CUSP NAME
	MOVSI	T2,(SIXBIT /SYS/)  ;GET CUSPS FROM SYS
	MOVEM	T2,RUNBLK	;SAVE DEVICE
	HRRI	T1,RUNBLK	;SET POINTER FOR RUN UUO
	MOVEM	F,SAVEF		;SAVE FLAGS FOR LATER
	PUSHJ	P,TTYPBF	;DUMP TTY BUFFER
	MOVE	T2,[RUN T1,]	;GET RUN UUO
	TXNE	F,F.PHYS	;SEE IF PHYSICAL NEEDED
	TXO	T2,UU.PHY	;YES--SET IT
	XCT	T2		;GO RUN THE CUSP
	MOVE	P,[IOWD L$PDL,PDL]  ;IN CASE OF FAILURE--LOGOUT
	MOVEI	ME,0		;CLEAR GARBAGE
	MOVE	F,SAVEF		;RESTORE FLAGS
	INTERR	(NFD,,<JRST .+1>)
	MOVE	T2,RUNBLK+1	;GET CUSP NAME
	PUSHJ	P,TYPSIX	;TYPE IT OUT
	TTYSTR	[ASCIZ / not found
/]
SUBTTL	KILL JOB ROUTINE

KILJOB:	TXNE	F,F.RTTY	;SEE IF STILL SOME TO REEAT
	PUSHJ	P,TTYIND	;YES--EAT IT UP
	TXNN	F,F.LOGI	;SEE IF LOGGED IN
	TTYSTR	[ASCIZ	/
./]				;NO--GIVE CONVENTIONAL DOT
LOGOF$:	PUSHJ	P,TTYPBF	;EMPTY TTY BUFFER
LOGO1$:	LOGOUT	1,		;EXIT WITH JUST A DOT

LOGOU$:	LOGOUT			;DESTROY THE JOB

LOGO2$:	CTYSTR	[ASCIZ \%FRCLIN INITIA - Logging out
\]
	MOVEI	1,[SIXBIT \SYS\
		SIXBIT \LOGOUT\
		EXP 0,0,0,0]	;SYS:LOGOUT, NOTHING FANCY.
	RUN	1,
	 JFCL
	LOGOUT			;IF RUN FAILED, GIVE UP.

SUBTTL	SUBROUTINE TO LIST STRUCTURE NOTES

STRUCT:	MOVEI	T7,0		;PRESET FOR SYSSTR
	MOVE	T6,.JBFF	;SAVE FREE CORE
STRUCL:	MOVEM	T6,.JBFF	;RESTORE FREE CORE
	SYSSTR	T7,		;GET NEXT STR IN SYSTEM
	  POPJ	P,		;GIVE UP IF NOT LEVEL-D
	JUMPE	T7,CPOPJ	;RETURN WHEN DONE
	PUSH	P,T6		;SAVE TWO AC'S
	PUSH	P,T7		; ..
	MOVX	T5,UU.PHS	;ACCESS /PHYSICAL
	MOVE	T6,T7		;GET STR NAME
	MOVEI	T7,IBF		;POINT TO INPUT BUFFER HEADER
	MOVSI	T1,'STR'	;PREPARE
	MOVSI	T2,'TXT'	; FILE
	MOVEI	T3,0		; STR.TXT[1,4]
	MOVE	T4,SYSPPN	; ON EACH STRUCTURE
	PUSHJ	P,HILOOK	;LOOKUP FILE ON DISK OR HISEG
	  JRST	STRUCO		;IGNORE IF MISSING OR SCREWY
	MOVE	T2,(P)		;GET STR NAME
	PUSHJ	P,TYPSIX	;TYPE IT
	TTYSTR	[ASCIZ /:	/]
	PUSHJ	P,TYPFIL	;GO TYPE FILE
STRUCO:	POP	P,T7		;RESTORE STR NAME
	POP	P,T6		;RESTORE .JBFF
	SETZM	LOWPTR		;FORGET ABOUT FILE
	RELEAS	TI,		;RELEASE CHANNEL
	HLLZS	.JBINT		;CLEAR INTERCEPT
	TXZ	F,F.EOF		;CLEAR EOF FLAG
	JRST	STRUCL		;LOOP FOR NEXT STR
SUBTTL	SYSTEM STARTUP COMMAND (FORCE INITIA ON FRCLIN)

SYSIN$:	TXNN	F,F.CTY		;ARE WE A GOOD GUY?
	JRST	SYSINE		;NO
	MOVE	T3,FLNNUM	;GET FRCLIN UDX
	MOVE	T2,['INITIA']	;INITIA COMMAND
	MOVE	T1,[2,,T2]	;FRCUUO ARG POINTER TO
	FRCUUO	T1,		;FORCE AN INITIA COMMAND ON FRCLIN
	 JFCL			;OH WELL
	POPJ	P,		;SUCCESSFUL RETURN

SYSINE:	INTERR	(SLC,<SYSTEM command legal only from [OPR] on CTY:>,<JRST .+1>)
	TXO	F,F.CERR	;FLAG ERROR
	POPJ	P,		;AND DISAPPEAR

;NOTE, THAT IF WE GET HERE, WE DO NOT DO INITIA NORMAL STUFF
STOMP$:
	MOVE	T1,MYPPN	;FIND OUT WHAT I AM
	CAMN	T1,FFAPPN	;ARE WE GOD?
	 JRST	STOMP1		;I'M O.K. - GO AHEAD.
	INTERR	(STC,<STOMP command legal only from [OPR]>,<JRST .+1>)
	TXO	F,F.CERR	;FLAG AN ERROR
	POPJ	P,		;AND RETURN TO COMMAND PARSER

STOMP1:	SETOM	TTWFLG		;FLAG THAT WE WANT TO START STOMPING.
	MOVEI	T1,STOMP3	;ROUTINE TO START STOMPING WITH
	MOVEM	T1,JUMPPR	;WILL CATCH THIS AT END OF PROCESSING.
	POPJ	P,		;AND RETURN


STOMP3:	OUTSTR	[ASCIZ \%%TTY STOMPER detaching from terminal
\]
	HRROI	T1,		;SET UP FOR DETACH
	ATTACH	T1,		;LET GO OF THE TERMINAL
	 JRST	[INTERR (ATF,<ATTACH uuo to detach failed!!!>,<POPJ P,>)]
	JRST	TTWINI		;JUMP INTO TTY STOMPER CODE


SUBTTL	HELP ROUTINE

HELP:	MOVE	T1,['INITIA']
	PUSHJ	P,.HELPR##	;GO GIVE HELP
	JRST	KILJOB		;GO KILL JOB
SUBTTL	SUBROUTINES TO LIST SYSTEM AND TEXT NOTICES

;ROUTINE TO TYPE OUT INITIA.TXT FROM SYS:

TEXT:	MOVEI	T5,0		;READ IN ASCII MODE
	MOVSI	T6,'SYS'	;SYS:
	MOVEI	T7,IBF		;INPUT BUFFER
	MOVE	T1,['INITIA']	;LOOKUP
	MOVSI	T2,'TXT'	; FILE
	SETZB	T3,T4		; SYS:INITIA.TXT[-]
	PUSHJ	P,HILOOK	;FIND FILE IN HISEG
	  POPJ	P,		;GIVE UP IF NO FILE
	PUSHJ	P,TYPFIL	;TYPE CONTENTS OF FILE
	SETZM	LOWPTR		;FORGET FILE
	RELEAS	TI,		;RELEASE CHANNEL
	TXZ	F,F.EOF		;CLEAR EOF INDICATOR
	POPJ	P,		;RETURN

NOTICE:	MOVEI	T5,0		;READ IN ASCII MODE
	MOVSI	T6,'SYS'	;SYS:
	MOVEI	T7,IBF		;INPUT BUFFER
	MOVE	T1,['NOTICE']	;LOOKUP
	MOVSI	T2,'TXT'	; FILE
	SETZB	T3,T4		; SYS:NOTICE.TXT[-]
	PUSHJ	P,HILOOK	;FIND FILE IN HISEG
	  POPJ	P,		;GIVE UP IF NO FILE
	PUSHJ	P,TYPFIL	;TYPE CONTENTS OF FILE
	SETZM	LOWPTR		;FORGET FILE
	RELEAS	TI,		;RELEASE CHANNEL
	TXZ	F,F.EOF		;CLEAR EOF INDICATOR
	POPJ	P,		;RETURN
SUBTTL	SUBROUTINE TO TYPE TTY SETTINGS

TYPTTY:
TYPT.1:	MOVSI	T7,-DOTTYU	;LOOP OF TTY SETUP TABLE
	SETZB	WD,CHRSOU	;CLEAR NUMBER OF THINGS TYPED
TYPT.2:	MOVE	T1,[2,,T2]	;ARG POINTER
	HLRZ	T2,DOTTYT(T7)	;GET FUNCTION
	CAIGE	T2,1000		;SEE IF READ FUNCTION
	JRST	TYPT.6		;NO--IGNORE IT
	HRRZ	T6,DOTTYT(T7)	;GET STORAGE
	MOVSI	T5,-TYPTTU	;LOOP OVER SPECIAL FORMATTERS
TYPT.3:	HRRZ	T4,TYPTTT(T5)	;GET ITS STORAGE
	CAME	T4,T6		;SEE IF SAME
	AOBJN	T5,TYPT.3	;NO--LOOP
	MOVE	T6,TYPTTW(T5)	;YES OR END--GET NAME
	HLR	T5,TYPTTT(T5)	;GET ADDRESS OF FORMATTER
	JUMPL	T5,TYPT.5	;IF FOUND, GO DO IT
	HRRZ	T6,DOTTYT(T7)	;RESTORE MATCHING VALUE
	MOVSI	T5,-CMDL	;ELSE LOOP OVER COMMAND TABLE
TYPT.4:	HRRZ	T4,CMDP(T5)	;GET ITS STORAGE
	CAME	T4,T6		;SEE IF SAME
	AOBJN	T5,TYPT.4	;NO--LOOP
	JUMPG	T5,TYPT.6	;IGNORE IF NOT IN EITHER TABLE
	MOVE	T6,CMDT(T5)	;GET NAME
	HLRE	T5,CMDP(T5)	;GET FORMAT INDICATOR
	JUMPLE	T5,TYPT.6	;IF SPECIAL ROUTINE, IGNORE
	CAIL	T5,3		;SEE IF 4
	MOVEI	T5,3		;YES--MERGE INTO SEQUENCE
	MOVE	T5,[TYPBON	;1=BIT ON
		    TYPBOF	;2=BIT OFF
		    TYPVAL]-1(T5) ;3/4=DECIMAL VALUE
;HERE WHEN STYLE IDENTIFIED
TYPT.5:	MOVE	T3,TERNUM	;GET TTY NUMBER
	TRMOP.	T1,		;READ VALUE
	  JRST	TYPT.6		;IGNORE IF ERROR
	PUSHJ	P,(T5)		;FORMAT OUTPUT
	SKIPN	T1,CHRSOU	;GET CHARACTERS TYPED
	JRST	TYPT.6		;NO OUTPUT THIS TIME
	AOS	WD		;NUMBER OF THINGS TYPED
	TLC	T7,-1		;THIS IS TO BUM THE TABS AFTER THE LAST ITEM
	TLCE	T7,-1		;ONLY WORKS BECAUSE "REMOTE" TYPES SOMETHING
	TRNN	WD,3		;DO ONLY 4 PER LINE
	JRST	[TTYSTR CRLFM	;END THIS LINE
		JRST TYPT.6]	;AND GET THE NEXT THING
	CAIGE	T1,^D8		;NUMBER OF CHARACTERS TYPED
	TTYCHR	"	"	;SMALL, NEED 2 TABS
	TTYCHR	"	"	;ALIGN NEXT OUTPUT FIELD
TYPT.6:	SETZM	CHRSOU		;COUNT FRESH
	AOBJN	T7,TYPT.2	;LOOP OVER TRMOP TABLE
	POPJ	P,		;RETURN
TYPTTT:			;TABLE OF SPECIAL FORMATTERS,,VALUE
;	TYPAGA,,PAGEON
;	TYPAGB,,PAGE
	TYPT.6,,PAGEON	;TTY PAGE (OBSOLETE)
	TYPT.6,,PAGE	;TTY PAGE:N (OBSOLETE)
	TYPSSI,,SSIZE	;TTY STOP N (DEFER UNTIL TTY STOP)
	TYPSST,,SSTOP	;TTY SSTOP  (DEFER UNTIL TTY STOP)
	TYPSTP,,STOP	;TTY STOP (ONE OF: NO STOP; STOP:N; SSTOP:N)
	TYPSPD,,RCV
	TYPSPD,,XMT
	TYPTYP,,TYPE
	TYPECA,,ECHO
	TYPECB,,ECHDEF
	TYPESC,,ESCAPE
	TYPUNP,,UNPAUSE
TYPTTU==.-TYPTTT

TYPTTW:			;TABLE OF NAMES OF ABOVE
	SIXBIT	/PAGE/
	SIXBIT	/PAGE/
	SIXBIT	/SSIZE/
	SIXBIT	/SSTOP/
	SIXBIT	/STOP/
	SIXBIT	/RCV/
	SIXBIT	/XMT/
	SIXBIT	/TYPE/
	SIXBIT	/ECHO/
	SIXBIT	/ECHO/
	SIXBIT	/ESCAPE/
	SIXBIT	/UNPAUS/
;ROUTINE TO TYPE ECHO:DEFER OF NO ECHO OR JUST ECHO

TYPECA:	MOVEM	T1,ECHO		;SAVE FOR ECHO:DEFER LOGIC
	JUMPN	T1,TYPBOF	;TYPE NO ECHO IF SET
	POPJ	P,		;ELSE WAIT FOR THE NEXT OONE
TYPECB:	SKIPE	ECHO		;DID WE ALREADY SAY "NO ECHO"
	POPJ	P,		;YES, THAT'S VERBOSE ENOUGH
	JUMPE	T1,TYPBOF	;NO, JUST SAY "ECHO" IF NOT DEFERED
	TTYSTR	1,[ASCIZ/ECHO:DEFER/] ;OUTPUT IT AND RETURN

;ROUTINE TO TYPE PAGE:N OR NOPAGE

TYPAGA:	MOVEM	T1,PAGEON	;SAVE FOR PAGE:N LOGIC
	JUMPE	T1,TYPBON	;IF NO PAGE, GO TYPE
	POPJ	P,		;ELSE, RETURN
TYPAGB:	SKIPN	PAGEON		;SEE IF NO PAGE
	POPJ	P,		;YES--RETURN
	JUMPE	T1,TYPBOF	;NO--IF PAGE:0 TYPE PAGE
	JRST	TYPVAL		;ELSE, TYPE DECIMAL PAGE

;ROUTINE TO FORMAT SPEED

TYPSPD:	ANDI	T1,17		;PROTECT AGAINST JUNK
	JUMPE	T1,CPOPJ	;IGNORE IF ZERO
	PUSH	P,T1		;SAVE VALUE
	MOVE	T2,T6		;GET NAME
	PUSHJ	P,TYPSIX	;TYPE IN SIXBIT
	TTYSTR	[ASCIZ /SPEED:/]
	POP	P,T1		;RECOVER SPEED INDEX
	MOVE	T2,SPEEDT(T1)	;GET SPEED
	PJRST	TYPSIX		;TYPE IN SIXBIT

;ROUTINE TO TYPE TYPE:XXXXXX

TYPTYP:	MOVE	T2,T1		;PUT TYPE IN T2
	TTYSTR	[ASCIZ /TYPE:/]
	PJRST	TYPSIX		;TYPE IT OUT

;HANDLE STOP PARAMETER(S)

TYPSTP:	JUMPE	T1,TYPBNO	;TYPE "NO STOP" IF TTY NO STOP
	SKIPN	SSIZE		;OR IF TTY STOP:0
	JRST	TYPBNO		;THEN "TTY NO STOP"
	SKIPE	SSTOP		;SUPER-STOP SET?
	TTYSTR	[ASCIZ\S\]	;YES, SO INDICATE
	TTYSTR	[ASCIZ\STOP:\]	;NAME THE FIELD/FUNCTIONALITY
	MOVE	T1,SSIZE	;GET AUTO-STOP SIZE
	PJRST	TYPDEC		;AND LIST DECIMAL LINES

TYPSSI:	MOVEM	T1,SSIZE	;SAVE SSIZE PARAMETER FOR TYPSTP
	POPJ	P,		;BUT OTHERWISE IGNORE

TYPSST:	MOVEM	T1,SSTOP	;SAVE SSTOP PARAMETER FOR TYPSTP
	POPJ	P,		;BUT OTHERWISE IGNORE IT

;ROUTINE TO TYPE CHARACTER VALUES

TYPESC:	CAIN	T1,.CHESC	;REAL ESCAPE?
	JRST	TYPBNO		;YES, SAY "NOESCAPE"
	JRST	TYPCHR		;NO, TYPE THE VALUE

TYPUNP:	CAIN	T1,.CHCNQ	;REAL CONTROL-Q?
	JRST	TYPBNO		;YES, SAY "NOUNPAUSE"

TYPCHR:	PUSH	P,T1		;SAVE VALUE
	MOVE	T2,T6		;GET NAME
	PUSHJ	P,TYPSIX	;TYPE IN SIXBIT
	TTYCHR	":"		;SEPARATE FROM VALUE
	POP	P,T1		;RECOVER SPEED INDEX
	PJRST	TYPOCT		;TYPE THE CHARACTER VALUE IN OCTAL
;ROUTINE TO FORMAT DECIMAL

TYPVAL:	PUSH	P,T1		;SAVE VALUE
	MOVE	T2,T6		;GET NAME
	PUSHJ	P,TYPSIX	;TYPE IN SIXBIT
	TTYCHR	":"		;SEPARATE FROM VALUE
	POP	P,T1		;RESTORE VALUE
	PJRST	TYPDEC		;TYPE IN DECIMAL

;ROUTINE TO FORMAT BIT VALUES

TYPBOF:	TRC	T1,1		;VALUE NORMALLY ON SO SWITCH
TYPBON:	TRNN	T1,1		;SEE IF SET
TYPBNO:	TTYSTR	[ASCIZ /NO/]	;NO--INDICATE
	MOVE	T2,T6		;GET NAME
	PJRST	TYPSIX		;TYPE IN SIXBIT
SUBTTL	TTY SETUP PROCESSORS


;NOTE--ALL MUST PRESERVE T1, T3

SUBTTL	TERMINET ROUTINE
;TRMNET -- SETUP TERMINET 300 TABS

TRMNET:	MOVEI	T2,TRMIMG	;GET SPECIAL TEXT TO SEND
	PUSHJ	P,SNDIMG	;SEND TO UNIT
	SETOM	T2		;FLAG FOR THIS UNIT
	GETLCH	T2		;GET LINE CHARACTERISTICS
	TXO	T2,GL.TAB	;SET TABS FLAG
	SETLCH	T2		;SET LINE CHARACTERISTICS
	POPJ	P,		;RETURN
SUBTTL	COMPARE EIGHT BIT ASCII STRINGS (CMPS8)

;SUBROUTINE TO COMPARE TWO EIGHT BITS ASCII STRINGS
;CALL:	MOVEI	T1,<ADDRESS OF FIRST STRING BLOCK>
;	MOVEI	T2,<ADDRESS OF SECOND STRING BLOCK>
;	PUSHJ	P,CMPS8
;	 ERROR RETURN IF STRINGS DON'T MATCH
;	SKIP RETURN IF MATCH
;USES T1, T2

CMPS8:	PUSH	P,T1		;SAVE THE FIRST STRING BLOCK ADDRESS
	PUSH	P,T2		;SAVE THE SECOND STRING BLOCK ADDRESS
	HLRZ	T1,.NSASL(T1)	;GET THE NUMBER OF BYTES IN THE FIRST STRING
	PUSH	P,T1		;SAVE IT
	HLRZ	T1,.NSASL(T2)	;GET THE LENGTH OF THE SECOND STRING
	CAME	T1,(P)		;ARE THEY THE SAME LENGTH?
	JRST	CMPS.3		;NO, RETURN ERROR
	JUMPE	T1,CMPS.2	;IF ZERO LENGTH, ALWAYS WINS
	MOVE	T1,[POINT 8,.NSAST] ;GET THE BYTE POINTER BITS
	ADDM	T1,-2(P)	;AND FIX UP BOTH
	ADDM	T1,-1(P)	; OF THE BLOCK POINTERS
CMPS.1:	ILDB	T1,-2(P)	;GET A BYTE FROM THE FIRST STRING
	CAIL	T1,"a"		;IS IT
	CAILE	T1,"z"		; LOWER CASE?
	SKIPA			;NOPE
	SUBI	T1,"a"-"A"	;YES, CONVERT IT TO UPPER
	CAIL	T1,"a"!200	;IS IT INTERNATIONALLY
	CAILE	T1,"z"!200	;  LOWER CASE?
	SKIPA			;NOPE
	SUBI	T1,"a"-"A"	;YES, SORT OF
	ILDB	T2,-1(P)	;GET A BYTE FROM THE FIRST STRING
	CAIL	T2,"a"		;IS IT
	CAILE	T2,"z"		; LOWER CASE?
	SKIPA			;NOPE
	SUBI	T2,"a"-"A"	;YES, CONVERT IT TO UPPER
	CAIL	T2,"a"!200	;IS IT INTERNATIONALLY
	CAILE	T2,"z"!200	;  LOWER CASE?
	SKIPA			;NOPE
	SUBI	T2,"a"-"A"	;YES, SORT OF
	CAME	T1,T2		;ARE THE TWO CHARACTERS EQUAL?
	JRST	CMPS.3		;NOPE.  THAT'S AN ERROR
	SOSLE	(P)		;YES, ANY MORE CHARACTERS?
	JRST	CMPS.1		;YES, DO ANOTHER ONE THEN
CMPS.2:	AOS	-3(P)		;NO, WE'RE HAPPY THEN
CMPS.3:	POP	P,(P)		;CLEAN ALL
	POP	P,(P)		; THE JUNK
	POP	P,(P)		; OFF THE STACK
	POPJ	P,		;AND RETURN
SUBTTL	INPUT ROUTINES

;SUBROUTINE TO FIND A WORD IN A TABLE
;CALL:	MOVE	WD,WORD IN SIXBIT
;	MOVE	T1,MASK OF WHAT TYPED
;	MOVE	T2,[IOWD LEN,TABLE]
;	PUSHJ	P,FNDWRD
;	ERROR RETURN
;	FOUND WITH T2=INDEX OF RESULT
;USES T3, T4, T5

SUBTTL	TABLE SEARCH ROUTINE
FNDWRD:	MOVE	T3,T2		;SAVE POINTER
	MOVEI	T5,0		;CLEAR ABBREVIATION POINTER
FNDW.1:	MOVE	T4,1(T3)	;GET NEXT TRIAL
	XOR	T4,WD		;COMPARE
	JUMPE	T4,FNDW.3	;GOOD MATCH
	TDNE	T4,T1		;SEE IF OK AS ABBREVIATION
	JRST	FNDW.2		;NOT ABBREVIATION
	SKIPE	T5		;SEE IF ABBREVIATION KNOWN
	SETOM	T5		;YES--SET FLAG
	SKIPN	T5		;SEE IF ANY ABBREVIATION
	HRRZ	T5,T3		;SAVE POINTER
FNDW.2:	AOBJN	T3,FNDW.1	;LOOP OVER LIST
	SKIPG	T3,T5		;RECOVER ABBREVIATION
	POPJ	P,		;ERROR RETURN IF NONE
FNDW.3:	SUBI	T3,(T2)		;GET INDEX
	MOVEI	T2,(T3)		;COPY RESULT
CPOPJ1:	AOS	(P)		;SUCCESS
	POPJ	P,		;RETURN
;SUBROUTINE TO GET A CHARACTER VALUE:  WHICH IS EITHER AN OCTAL CHARACTER
;CODE, A SINGLE CHARACTER ^X FOR CONTROL CHARACTER OR ^^ FOR ^
;RETURNS VALUE IN T1; USES T2
	
GCHVAL:	PUSHJ	P,SKIPTV	;SKIP TO VALUE IF ANY
	CAIN	CH,":"		;SEE IF VALUE
	JRST	GCHVA1		;YES--SETTING NUMBER
	CAIL	CH,"0"		;OR
	CAILE	CH,"7"		; OCTAL
	JRST	GCHVA2		;NO. MUST BE REAL CHARACTER
GCHVA1:	PUSHJ	P,GETOCT	;GET THE OCTAL CHARACTER VALUE
	JRST	CPOPJ1		;OK, RETURN WITH CHAR VALUE
GCHVA2:	PUSHJ	P,GETCHA	;GET THE NEXT CHARACTER
	CAIE	CH," "		;ANY LEADING WHITESPACE?
	CAIN	CH,"	"	; (INCLUDING TABS)?
	JRST	GCHVA2		;YES, SKIP IT
	CAIN	CH,"^"		;DOES IT LOOK LIKE A CONTROL CHARACTER?
	JRST	[MOVE	T1,CH		;NO, GET THE CHARACTER AS GIVEN
		 JRST	CPOPJ1]		;AND GIVE THE SUCCESS RETURN
	PUSHJ	P,GETCHA	;YES, GET THE NEXT CHARACTER
	MOVE	T1,CH		;COPY THE CHARACTER
	CAIN	T1,"^"		;OR DID HE REALLY MEAN CIRCUMFLEX?
	JRST	CPOPJ1		;HE REALLY MEANT ^
	TRNN	T1,100		;IS IT SOMETHING WE CAN MAKE A CONTROL CHAR OUT OF?
	JRST	[MOVX	T1,.CHESC	;NO, JUST ASSUME GOOD OL' ESCAPE
		 POPJ	P,]		;GIVE ERROR RETURN
	ANDI	T1,37		;YES, MAKE IT A CONTROL CHARACTER
	JRST	CPOPJ1		;AND RETURN HAPPY
;SUBROUTINE TO READ A STRING ARGUMENT, DELIMITED BY EITHER FLAVOR OF QUOTE.
;CALLED WITH STRING POINTER IN T1, MAX BYTE COUNT (NOT INCLUDING TERMINATING
;NULL) IN T2.

;DESTROYS T1-T

GSTARG:	PUSHJ	P,SKIPTV	;SKIP TO VALUE IF ANY
	PUSHJ	P,GETCHA	;GET THE FIRST QUOTE
	CAIE	CH,""""		;IS IT A QUOTE
	CAIN	CH,"'"		;  OF EITHER TYPE?
	SKIPA			;YES, GO ON
	POPJ	P,		;NO, RETURN ERROR
	MOVE	T3,CH		;SAVE THE DELIMITER
	JRST	GSTA.2		;SKIP INTO THE LOOP
GSTA.1:	SOSL	T2		;ALLOWED TO STORE THIS ONE?
	IDPB	CH,T1		;YES, STORE IT THEN
GSTA.2:	PUSHJ	P,GETCHA	;GET THE NEXT CHARACTER
	TXNE	F,F.EOF!F.ECMD	;ARE WE AT THE END OF THE LINE?
	POPJ	P,		;YES, THAT'S AN ERROR
	CAME	CH,T3		;IS IT THE DELIMITER AGAIN?
	JRST	GSTA.1		;NO, STORE IT AND TRY ANOTHER
	PUSHJ	P,GETCHA	;GET THE NEXT CHARACTER
	CAMN	CH,T3		;IS IT THE QUOTE AGAIN?
	JRST	GSTA.1		;YES, GO STORE IT
	MOVEM	CH,REEAT	;NO, PUT IT BACK
	SETZ	T2,		;GET A NULL
	IDPB	T2,T1		;TERMINATE THE STRING
	JRST	CPOPJ1		;AND RETURN HAPPY
;SUBROUTINE TO SKIP TO VALUE IF ANY
;SKIPS ONE : OR SEVERAL SPACES/TABS

SUBTTL	SKIP TO VALUE ROUTINE
SKIPTV:	CAIN	CH,":"		;SEE IF :
	POPJ	P,		;YES--OK TO PROCEED
SKTV.1:	CAIE	CH," "		;SEE IF SPACE
	CAIN	CH,"	"	; OR TAB
	JRST	[PUSHJ P,GETCHA	;YES--SKIP ON
		 JRST  SKTV.1]	;AND LOOP
	TXNN	F,F.ECMD	;IF END OF LINE NOT REACHED,
	HRROM	CH,REEAT	;REEAT LAST CHAR
	POPJ	P,		;RETURN

;ROUTINE TO READ A DECIMAL NUMBER
;RETURNS VALUE IN T1; USES T2

SUBTTL	DECIMAL READ ROUTINE
SUBTTL	OCTAL READ ROUTINE
GETOCT:	SKIPA	T2,[10]	; LOAD OCTAL BASE
GETDEC:	MOVEI	T2,^D10	; LOAD DECIMAL BASE
	MOVEI	T1,0		; CLEAR RESULT
GTDC.0:	PUSHJ	P,GETCHA	;GET LEAD CHARACTER
	CAIE	CH," "		;IS IT A SPACE
	CAIN	CH,"	"	; OR A TAB?
	JRST	GTDC.0		;YES, IGNORE IT.
	CAIE	CH,"#"		;SEE IF OCTAL FORCER
	JRST	GTDC.1		;NO--START ACCUMULATION
	MOVEI	T2,10		;YES--CHANGE TO OCTAL RADIX
	PUSHJ	P,GETCHA	;AND REPLACE FIRST CHARACTER
GTDC.1:	CAIL	CH,"0"		;SEE IF
	CAIL	CH,"0"(T2)	; NUMERIC
	JRST	GTDC.2		;NO--MUST BE DONE
	IMULI	T1,(T2)		;YES--ROUND UP
	ADDI	T1,-"0"(CH)	;INCLUDE THIS DIGIT
	PUSHJ	P,GETCHA	;GET NEXT CHARACTER
	JRST	GTDC.1		;LOOP
GTDC.2:	CAIN	CH,"."		;SEE IF DECIMAL SUFFIX
	PUSHJ	P,GETCHA	;YES--SKIP IT
	POPJ	P,		;RETURN VALUE
;SUBROUTINE TO GET AN EIGHT BIT ASCII STRING
;CALLED WITH STRING BLOCK POINTER IN T1, MAX LENGTH IN T2
;DESTROYS T1, T2, CH

SUBTTL	EIGHT BIT ASCII STRING INPUT (GETAS8)
GETAS8:	HRRZ	T2,.NSASL(T1)	;GET THE LENGTH OF THE STRING BLOCK
	SUBI	T2,.NSAST	;ACCOUNT FOR THE COUNT WORDS
	LSH	T2,2		;GET THE MAXIMUM NUMBER OF BYTES
	PUSH	P,[0]		;INIT THE CURRENT BYTE COUNT
	PUSH	P,[POINT 8,.NSAST(T1)] ;SETUP THE OUTPUT BYTE POINTER
	PUSHJ	P,GETCHA	;GET THE FIRST CHARACTER
	TXNE	F,F.ECMD	;END OF STRING ALREADY?
	JRST	GETA85		;YES, EXIT THE LOOP
	PUSH	P,CH		;PUT IT ON THE STACK
	JUMPE	T2,GETA84	;DON'T BOTHER IF NO STORAGE
	CAIE	CH,""""		;IS IT SOME SORT
	CAIN	CH,"'"		;OF QUOTING CHARACTER?
	JRST	GETA81		;YES, START READING THE STRING
	SETZM	(P)		;NO, NO QUOTING THEN
	JRST	GETA82		;ENTER THE LOOP ALREADY IN PROGRESS
GETA81:	PUSHJ	P,GETCHA	;GOT SOME ROOM, GET A CHARACTER
	TXNE	F,F.ECMD	;END OF LINE?
	JRST	GETA84		;YES, QUIT
	SKIPN	(P)		;DOING A QUOTED STRING?
	JRST	GETA82		;NO, CHECK FOR ALPHANUMERIC
	CAME	CH,(P)		;IS IT OUR QUOTE CHARACTER COME BACK?
	JRST	GETA83		;NO, GO ON
	PUSHJ	P,GETCHA	;YES, GET THE NEXT CHARACTER
	TXNE	F,F.ECMD	;END OF LINE?
	JRST	GETA84		;YES, QUIT
	CAME	CH,(P)		;IS IT THE QUOTE CHARACTER AGAIN?
	JRST	GETA84		;NO, END OF STRING
	JRST	GETA83		;YES, GO STORE THE CHARACTER
GETA82:	CAIN	CH,.CHCNV	;CONTROL-V?
	JRST	[PUSHJ	P,GETCHA	;YES, GET THE NEXT CHARACTER
		 JRST	GETA83]		;SEND IT IN ANY CASE
	CAIGE	CH,"0"		;IS IT A DIGIT?
	JRST	GETA84		;DEFINITELY NOT
	CAIG	CH,"9"		;MAYBE ...
	JRST	GETA83		;YEP
	CAIGE	CH,"A"		;HOW ABOUT SOME UPPER CASE?
	JRST	GETA84		;NOPE
	CAIG	CH,"Z"		;MAYBE AGAIN ...
	JRST	GETA83		;YEP
	CAIL	CH,"a"		;LAST CHANCE IS LOWER CASE
	CAILE	CH,"z"		; ...
	JRST	GETA84		;NOPE, END OF STRING
GETA83:	IDPB	CH,-1(P)	;STORE THE CHARACTER
	AOS	-2(P)		;COUNT THE CHARACTER
	SOJG	T2,GETA81	;LOOP FOR ALL OF THEM
GETA84:	SKIPN	(P)		;WERE WE READING A QUOTED STRING?
	TXZA	F,F.QUOT	;NO, SAY WE WEREN'T
	TXO	F,F.QUOT	;YES, REMEMBER THAT
	POP	P,(P)		;GET RID OF THE QUOTE CHARACTER
GETA85:	POP	P,(P)		;GET RID OF THE BYTE POINTER
	POP	P,T2		;GET THE BYTE COUNT
	HRLM	T2,.NSASL(T1)	;STORE THE BYTE COUNT
	POPJ	P,		;AND RETURN
;SUBROUTINES TO CONVERT A SIXBIT NAME TO AN EIGHT BIT ASCII STRING
;EXPECTS SIXBIT WORD IN WD, STRING BLOCK ADDRESS IN T1
;DESTROYS CH

SUBTTL	EIGHT BIT STRING FROM SIXBIT WORD ROUTINE (GET628)
GET628:	PUSH	P,[POINT 6,WD]	;SETUP A POINTER TO THE SIXBIT WORD
	PUSH	P,T1		;SAVE THE STRING BLOCK POINTER
	HRRZ	CH,.NSASL(T1)	;GET THE NUMBER OF WORDS IN THE BLOCK
	SUBI	CH,.NSAST	;ACCOUNT FOR THE HEADER WORDS
	LSH	CH,2		;CONVERT TO A BYTE COUNT
	CAIL	CH,6		;ENOUGH FOR A WHOLE WORD OF SIXBIT?
	MOVEI	CH,6		;YES, LIMIT IT TO SIX CHARACTERS
	PUSH	P,CH		;SAVE THE BYTE COUNT
	MOVE	CH,[POINT 8,.NSAST] ;GET THE BYTE POINTER BITS
	ADDM	CH,-1(P)	;MAKE THE BLOCK POINTER A BYTE POINTER
	HRLZS	T1		;INIT THE BYTE COUNTER, SAVE ADDR IN LH
GET6.1:	SOSGE	(P)		;ANY MORE BYTES TO DO?
	JRST	GET6.2		;NO, EXIT LOOP
	ILDB	CH,-2(P)	;GET THE NEXT BYTE
	JUMPE	CH,GET6.2	;END OF STRING IF ZERO
	ADDI	CH," "-' '	;CONVERT IT TO ASCII
	IDPB	CH,-1(P)	;STORE IT IN THE OUTPUT STRING
	AOJA	T1,GET6.1	;LOOP FOR ALL THE BYTES
GET6.2:	MOVS	T1,T1		;SWAP HALVES OF COUNT WORD
	HLLM	T1,.NSASL(T1)	;STORE THE NEW BYTE COUNT
	POP	P,(P)		;GET RID OF THE BYTE LIMIT
	POP	P,(P)		;GET RID OF THE OUTPUT POINTER
	POP	P,(P)		;GET RID OF THE INPUT POINTER
	POPJ	P,		;AND RETURN
;SUBROUTINE TO GET A SIXBIT NAME FROM A STRING BLOCK
;EXPECTS STRING BLOCK ADDRESS IN T1
;RETURNS SIXBIT NAME IN WD, LEAVES WHATEVER WAS IN CH, MASK IN T1, DESTROYS T2

SUBTTL	SIXBIT NAME FROM STRING BLOCK ROUTINE (GET826)
GET826:	PUSH	P,CH		;SAVE THE OLD TERMINATOR
	MOVEI	T2,.NSAST(T1)	;POINT TO THE EIGHT BIT STRING STORAGE
	HRLI	T2,(POINT 8,)	;MAKE IT A BYTE POINTER
	PUSH	P,T2		;PUT THE BYTE POINTER ON THE STACK
	HLRZ	T1,.NSASL(T1)	;GET THE NUMBER OF BYTES IN THE STRING
	PUSH	P,T1		;SAVE THE BYTE COUNT
	SETZB	T1,WD		;CLEAR RESULTS
	MOVEI	T2,6		;GET MAX NUMBER OF BYTES
GET8.1:	LSH	WD,6		;SHIFT THE RESULT ANOTHER CHARACTER
	LSH	T1,6		;SHIFT THE MASK AS WELL
	SOSGE	(P)		;ANOTHER BYTE COMING?
	SKIPA	CH,[" "]	;NO, FILL WITH A SPACE
	ILDB	CH,-1(P)	;YES, GET IT
	ANDI	CH,177		;FORCIBLY MAKE IT 7 BIT ASCII (WELL ...)
	CAIL	CH,"a"		;IS IT
	CAILE	CH,"z"		; LOWER CASE?
	SKIPA			;NOPE
	SUBI	CH,"a"-"A"	;YES, CONVERT TO UPPER
	IORI	WD,' '-" "(CH)	;STORE THE CHARACTER
	TRNE	WD,77		;DID WE JUST STORE SOMETHING?
	TRO	T1,77		;YES, LITE THE MASK
	SOJG	T2,GET8.1	;LOOP IF MORE BYTES TO DO
	POP	P,(P)		;GET RID OF THE COUNT
	POP	P,(P)		;AND THE BYTE POINTER
	POP	P,CH		;RESTORE THE OLD TERMINATOR
	POPJ	P,		;AND RETURN
;SUBROUTINE TO GET A SIXBIT NAME
;RETURNS SIXBIT NAME IN WD, TERMINATOR IN CH, MASK IN T1

SUBTTL	SIXBIT NAME ROUTINE (GETSIX)
GETSIX:	SETZB	T1,WD		;CLEAR RESULTS
GETSI1:	PUSHJ	P,GETCHA	;GET NEXT CHARACTER
	CAIL	CH,"0"		;SEE IF
	CAILE	CH,"9"		; NUMERIC
	SKIPA			;NO
	JRST	GETSI2		;YES
	CAIL	CH,"A"		;SEE IF ALPHA
	CAILE	CH,"Z"+40	; ..
	JRST	GETSI3		;NO--EXIT
	CAILE	CH,"Z"
	CAIL	CH,"A"+40
	SKIPA
	JRST	GETSI3		;NO--EXIT
	TRZ	CH,40		;FORCE UPPER CASE
GETSI2:	TLOE	T1,(77B5)	;MASK NEXT CHAR ON
	JRST	GETSI1		;LOOP
	ROT	T1,6		;POSITION MASK
	LSH	WD,6		;POSITION SIXBIT NAME
	IORI	WD,-40(CH)	;INCLUDE NEXT CHAR
	JRST	GETSI1		;LOOP FOR MORE
GETSI3:	CAIE	CH,"	"	;SEE IF TAB OR
	CAIN	CH," "		;BLANK SEPARATOR
	JUMPE	T1,GETSIX	;IF BLANK OR TAB FIELD, SKIP LEADING BLANKS
	JUMPE	T1,CPOPJ	;RETURN IF NULL
	TLNE	T1,(77B5)	;SEE IF LEFT ADJUSTED
	POPJ	P,		;YES--RETURN
	LSH	T1,6
	LSH	WD,6
	JRST	GETSI3
;SUBROUTINE TO CHANGE TTXXX: INTO TTYXXX:
;THIS ALLOWS 2 LETTER GENERIC DEVICE NAMES
;ROUTINE ALSO INSERTS LEADING 0 IN TTY NUMBERS TO SIMPLIFY
;COMPARES

SUBTTL	TTY EXPANSION ROUTINE (XPNTTY)
XPNTTY:	CAMN	WD,[SIXBIT /CTY/]
	MOVE	WD,CTYTTY	; GET TTY NNN FOR CTY
	MOVE	T1,WD		; COPY WORD
	TRNN	WD,777777	;DOES THIS JUST LOOK LIKE
	TLNE	WD,^-'777'	;  A STRING OF DIGITS?
	JRST	XPNT.0		;NO, GO ON
	MOVSS	WD		;YES, PUT THE DIGITS INTO THE RIGHT HALF
	HRLI	WD,'TTY'	;AND FAKE UP A TTY NAME
XPNT.0:	TLC	T1,'TT0'	;TEST TT THEN DIGIT
	TRNN	T1,77		;MUST BE LE 5 CHARS
	TLNE	T1,777770	;AND THAT FORM
	JRST	XPNT.1		;NOT--LEAVE ALONE
	MOVE	T1,WD		;MAKE ANOTHER COPY
	LSHC	T1,-^D24	;IS--SEPARATE GENERIC PART
	LSH	T1,6		;MOVE OVER
	TRO	T1,'Y'		;INCLUDE THE Y
	LSHC	T1,^D18		;REJOIN
	MOVE	WD,T1		;RESTORE TO NORMAL AC
XPNT.1:	TRNN	WD,77		;SEE IF LESS THAN 6 CHARS
	TRNN	WD,-1		;SEE IF GREATER THAN 3
	POPJ	P,		;NO--RETURN
	TRNE	T1,^-'777'	;IS THIS EVEN A NUMERIC NAME?
	POPJ	P,		;NO.  MUST BE LAT STRING
	HRRZ	T1,WD		;YES--GET RIGHT HALF
	TRC	T1,'0  '	;REMOVE DIGIT OFFSET
	TRNE	T1,7700		;SEE IF SECOND DIGIT
	TRC	T1,'0 '		;YES--REMOVE ITS OFFSET
	TRNE	T1,707070	;VERIFY ALL DIGITS
	POPJ	P,		;NO--LEAVE ALONE
	HRRZ	T1,WD		;OK--GET CLEAN COPY
	SKIPA			;ALL DIGITS
	LSH	T1,-6		; ADJUST
	TRNN	T1,77		; DIGITS
	JRST	.-2		; ..
	TRNN	T1,770000	;SEE IF FILL NEEDED
	TRO	T1,'0  '	;YES--FILL WITH 0
	TRNN	T1,7700		;SEE IF MORE FILL
	TRO	T1,'0 '		;YES--AGAIN
	HRR	WD,T1		;RETURN TO ANSWER
	POPJ	P,		;RETURN
SUBTTL	CVTSIX
;SUBROUTINE CVTSIX - CONVERT OCTAL NUMBERS IN THE RANGE
; 0-777 TO LEFT-JUSTIFIED SIXBIT. ON ENTRY T1=BINARY, ON
; RETURN T1=SIXBIT VALUE
; NOTE: THIS SUBROUTINE STRIPS TRAILING ZEROS.
CVTSIX:	TDZ	T1,[-1,,777000] ; CLEAR OUT GARBAGE
	MOVE	T3,[POINT 6,T1]	; PREPARE BYTE POINTER
CVTLOP:	IDIVI	T1,10	; DIVIDE OCTAL
	HRLM	T2,(P)		; STACK REMAINDER
	SKIPE	T1		; QUIT WHEN DONE
	PUSHJ	P,CVTLOP	; ELSE LOOP
	HLRZ	T2,(P)		; UNSTACK
	TRO	T2,20		; SIXBITIZE
	IDPB	T2,T3		; STORE IN LEFT HALF OF T1
	POPJ	P,0

;SUBROUTINE CVTBIN - CONVERT RIGHT HALF OCTAL TO SIXBIT
;CALL	MOVE	WD,ARG
;	PUSHJ	P,CVTBIN
;RETURN	CPOPJ

CVTBIN:	PUSH	P,WD+1
	TDZ	WD,[XWD -1,707070]
	LSHC	WD,-3
	LSH	WD,-3
	LSHC	WD,-3
	LSH	WD,-3
	LSHC	WD,6
	POP	P,WD+1
	POPJ	P,
;SUBROUTINE TO GET A SIXBIT WORD
;RETURNS WORD IN WD, TERMINATOR IN CH, MASK IN T1

SUBTTL	SIXBIT WORD ROUTINE (GETWRD)
GETWRD:	SETZB	T1,WD		;CLEAR RESULTS
GETWR1:	PUSHJ	P,GETCHA	;GET NEXT CHARACTER
	CAIL	CH,"A"		;SEE IF ALPHA
	CAILE	CH,"Z"+40	; ..
	JRST	GETWR2		;NO--EXIT
	CAILE	CH,"Z"
	CAIL	CH,"A"+40
	SKIPA
	JRST	GETWR2		;NO--EXIT
	TRZ	CH,40		;FORCE UPPER CASE
	TLOE	T1,(77B5)	;MASK NEXT CHAR ON
	JRST	GETWR1		;LOOP
	ROT	T1,6		;POSITION MASK
	LSH	WD,6		;POSITION WORD
	IORI	WD,-40(CH)	;INCLUDE NEXT CHAR
	JRST	GETWR1		;LOOP FOR MORE
GETWR2:	CAIE	CH,"	"	;TAB?
	CAIN	CH," "		;BLANK SEPARATOR?
	JUMPE	T1,GETWRD	;YES--IF SPACE OR TAB, SKIP THEM
	JUMPE	T1,CPOPJ	;RETURN IF NULL
	TLNE	T1,(77B5)	;SEE IF LEFT ADJUSTED
	POPJ	P,		;YES--RETURN
	LSH	T1,6
	LSH	WD,6
	JRST	GETWR2
;SUBROUTINE TO GET NEXT CHARACTER
;RETURNS CHARACTER IN CH

SUBTTL	CHARACTER ROUTINE (GETCHA)
GETCHA:	SKIPE	REEAT		;SEE IF REPEATING CHAR
	JRST	[HRRE  CH,REEAT  ;REPEAT IT
		 SETZM REEAT	;ONLY ONCE
		 POPJ  P,]	;RETURN
	SETOM	CH		;PRESET EOF
	TXNE	F,F.EOF		;SEE IF EOF ALREADY
	POPJ	P,		;YES--RETURN
	MOVEI	CH,.CHLFD	;PRESET EOL
	TXNE	F,F.ECMD	;SEE IF END ALREADY
	POPJ	P,		;RETURN IF SO
	SKIPE	CH,GETCH	;SEE IF INPUT ROUTINE
	PUSHJ	P,(CH)		;YES--GO READ
	  TXOA	F,F.ECMD	;END OF LINE--SET FLAG
	POPJ	P,		;ELSE, RETURN
	MOVEI	CH,0		;CLEAR CH IF END
	POPJ	P,		;RETURN

SUBTTL	SUBROUTINE TO READ FROM COMMAND TTY
;SKIP RETURNS WITH VALUE IN CH
;NON-SKIPS IF END OF LINE (BREAK)

TTYIN:	GETLIN	ME,		;GET CURRENT LINE
	TLNE	ME,-1		;IF DETACHED, ALL DONE
	INCHSL	CH		;GET CHARACTER
	  JRST	TTYI.2		;ALL DONE IF BUFFER EMPTY
	JUMPE	CH,TTYIN	;IGNORE IF NULL
	CAIE	CH,.CHCRT	;ALSO IF C.RET.
	CAIN	CH,.CHDEL	; OR NULL
	JRST	TTYIN		; IGNORE
	CAIE	CH,"!"		;SEE IF COMMENT
	CAIN	CH,";"		; OR OTHER FORM
	JRST	TTYIND		;YES--GO DISCARD LINE
TTYI.1:	CAIE	CH,.CHBEL	;IF BELL
	CAIN	CH,.CHESC	; OR ESCAPE,
	JRST	TTYI.2		;IT IS ALL DONE
	CAIL	CH,.CHLFD	;IF LESS THAN LINE FEED
	CAILE	CH,.CHFFD	; OR GREATER THAN FORM FEED
	JRST	CPOPJ1		; THEN OK
TTYI.2:	TXZ	F,F.RTTY	;INDICATE SUCCESSFUL REEATING
	POPJ	P,		;ELSE, ALL DONE
TTYIND:	INCHSL	CH		;GET CHARACTER TO DISCARD
	  JRST	TTYI.2		;RETURN IF DONE
	PUSHJ	P,TTYI.1	;ANALYZE RESULT
	  POPJ	P,		;RETURN IF EOL
	JRST	TTYIND		;LOOP UNTIL DONE
SUBTTL	COMMAND LINE PROCESSOR
; SUBROUTINE TO INPUT FROM FILE DISCARDING
; COMMENTS AND HANDLING CONTINUATIONS

FILINC:	SKIPE	CH,FILICH	;SEE IF LEFT OVER CHARACTER
	JRST	FILI.1		;YES--REUSE IT
	PUSHJ	P,FILI.3	;NO--GET NEXT FROM FILE
	  POPJ	P,		;AT END, RETURN
FILI.1:	SETZM	FILICH		;CLEAR LEFT OVERS
	CAIE	CH,"-"		;SEE IF CONTINUATION
	JRST	CPOPJ1		;NO--GOOD RETURN
FILI.2:	PUSHJ	P,FILI.3	;YES--SKIP ON
	  JRST	FILINC		;IF END, GET CONTINUATION
	CAIE	CH,"	"	;IGNORE TRAILING
	CAIN	CH," "		; SPACES AND TABS
	JRST	FILI.2		;LOOP
	MOVEM	CH,FILICH	;NOT EOL, MUST BE REAL -
	MOVEI	CH,"-"		;RETURN IT
	JRST	CPOPJ1		;SAVING NEXT CHAR FOR LATER ON

;SUBROUTINE TO STRIP COMMENTS

FILI.3:	PUSHJ	P,FILIN		;GET NEXT CHAR
	  POPJ	P,		;IF EOL, INDICATE THAT
	CAIE	CH,"!"		;ELSE SEE IF COMMENT
	CAIN	CH,";"		; OR OLD FORM
	SKIPA			;YES
	JRST	CPOPJ1		;NO--GOOD RETURN
FILI.4:	PUSHJ	P,FILIN		;SKIP REST OF LINE
	  POPJ	P,		;GIVE EOL RETURN
	JRST	FILI.4		;LOOP

SUBTTL	SUBROUTINE TO TYPE CONTENTS OF FILE

TYPFIL:	TXO	F,F.TSOL	;INDICATE NOT AT START OF LINE
	TXZ	F,F.ECMD!F.EOF	;INDICATE NOT AT EOF
TYPF.1:	PUSHJ	P,FILIN		;GET NEXT CHARACTER
	  JUMPL	CH,TYPF.2	;RETURN AT EOF
	CAIN	CH,.CHLFD	;IF LINE FEED,
	TXZA	F,F.TSOL	;AT EOL, CLEAR LINE FULL FLAG
	TXOA	F,F.TSOL	;NOT EOL, INDICATE SOMETHING TYPED
	TTYCHR	.CHCRT		; OUTPUT C.RET.
	TTYCHR	(CH)		;OUTPUT CHARACTER
	JRST	TYPF.1		;LOOP UNTIL DONE

TYPF.2:	TXZE	F,F.TSOL	;SEE IF ANYTHING ON THIS LINE
	TTYSTR	CRLFM
	POPJ	P,		;NOW RETURN
;SUBROUTINE TO LOOKUP A FILE (MAYBE IN HISEG)
;CALL WITH:
;	T1 THRU T4 SET TO 4-WORD LOOKUP BLOCK
;	T5 THRU T7 SET TO OPEN BLOCK
;	PUSHJ	P,HILOOK
;	  RETURN HERE IF FILE NOT FOUND
;	RETURN HERE IF FILE EXISTS (LOWPTR SET TO BYTE PTR OR 0)
HILOOK:	OPEN	TI,T5		;OPEN THE FILE
	  POPJ	P,		;FILE NOT FOUND
	TXNN	F,F.ANSW	;IS THIS A FORCED COMMAND?
	JRST	HILK.7		;NO--DO THE SLOW THING
	PUSH	P,T4		;SAVE THE PPN FOR A SPELL
	LOOKUP	TI,T1		;GO FIND THE FILE
	  SETO	T3,		;NOT THERE? MAKE AN UNLIKELY DATE WORD
	TRZ	T2,-1		;IN ANY CASE, CLEAR THE ACCESS DATE JUNK
	POP	P,T4		;AND RESTORE THE PPN WORD
	PUSHJ	P,HIFIND	;IS THIS IN THE HISEG TABLES?
	  JRST	HILK.2		;NO--GO MEMORIZE THE FILE
HILK.1:	SKIPN	T1,HS$PTR(I)	;DOES THE FILE EXIST?
	POPJ	P,0		;NO--GIVE NON-SKIP RETURN
	MOVEM	T1,LOWPTR	;REMEMBER BYTE POINTER TO STRING
	JRST	CPOPJ1		;GIVE GOOD RETURN
;HERE TO REMEMBER A FILE
HILK.2:	PUSHJ	P,HILOCK	;INTERLOCK THE HISEG
	  JRST	HILK.7		;GIVE UP IF CAN'T LOCK
	PUSHJ	P,HIFIND	;GO FIND THE FILE IN THE HISEG TABLE
				; ON THE CHANCE THAT IT SNUCK IT.
	  SKIPA			;NO--THAT IS WHAT I THOUGHT
	JRST	HILK.1		;YES--IT HAS SNUCK IT
	MOVE	I,JOBN		;GET OUR JOB NUMBER
	CAME	I,LOKJOB	;DO WE OWN THE INTERLOCK
	AOS	ITLCNT		;NO, COUNT IT BUT TRY TO CONTINUE
	MOVSI	I,-N$HSGF	;MAKE AN AOBJN POINTER
HILK.3:	SKIPE	HS$DEV(I)	;IS THIS SLOT FREE?
	AOBJN	I,.-1		;NO--KEEP LOOKING
	JUMPGE	I,HILK.7	;TABLE FULL?
	PUSH	P,T6		;REMEMBER DEVICE, BUT NOT SO THAT HIFIND
				;FINDS IT BEFORE FILE ACTUALLY GETS IN
				;(PUT IT IN HS$DEV(I) ON COMPLETION)
	SETOM	HS$DEV(I)	;RESERVE THIS SLOT
	SETZM	HS$PTR(I)	;ZERO POINTER
	SETOM	HS$DAT(I)	;ASSUME THE FILE'S NOT THERE
	MOVEM	T1,HS$FIL(I)	;REMEMBER FILE NAME
	MOVEM	T2,HS$EXT(I)	;REMEMBER EXTENSION
	MOVEM	T4,HS$PPN(I)	;REMEMBER PPN
	LOOKUP	TI,T1		;FIND THE FILE
	  JRST	HILK.8		;FILE NOT FOUND
	MOVEM	T3,HS$DAT(I)	;REMEMBER THE FILE'S CREATION DATE/TIME
;HERE TO COPY FILE INTO THE HISEG
	HLRZ	T2,.JBHRL	;FIND WHERE IN HIGH SEGMENT
	TRO	T2,400000	;PUT IN HIGH-SEG BIT
	MOVE	T1,HIPTR	;GET POINTER TO STRING
	TRNN	T1,-1		;IF NOT SET...
	HRRI	T1,1(T2)	;...GET FIRST FREE IN HIGH SEG
	MOVEM	T1,HIPTR	;INITIALIZE IT
	MOVEM	T1,HS$PTR(I)	;REMEMBER FOR THE FUTURE
	TXZ	F,F.ECMD!F.EOF	;FLAG NOT AT EOF
HILK.4:	HRRZ	T1,HIPTR	;GET POINTER TO STRING
	ADDI	T1,10		;AVOID USUAL END EFFECTS
	HRRZ	T2,.JBHRL	;GET SIZE OF HISEG
	CAMG	T1,T2		;WILL WE NEED MORE CORE
	JRST	HILK.5		;NO--KEEP GOING
	HRLZ	T1,T1		;DO A CORE UUO FOR HISEG
	CORE	T1,		; ..
	  JRST	[AOS	CORCNT	;COUNT THE FAILURE FOR DEBUGGING
		 SETZM HS$DEV(I);FORGET THE FILE
		 SETZM HS$PTR(I);AND THE POINTER
		 POP	P,T6
		 SETZM	LOWPTR	;FILE NOT FOUND
		 JRST	CPOPJ1]	;BUT STILL SET UP
HILK.5:	PUSHJ	P,FILIN		;GET A BYTE
	  JUMPL	CH,HILK.6	;EOF?
	IDPB	CH,HIPTR	;STORE THE BYTE IN THE HISEG
	JRST	HILK.4		;KEEP LOOKING
HILK.6:	SETZM	CH		;FLAG END OF FILE
	IDPB	CH,HIPTR	; ..
	IDPB	CH,HIPTR	; ..
HILK.8:	POP	P,HS$DEV(I)	;NOW, REMEMBER DEVICE IN TABLE
	JRST	HILK.1		;RETURN TO STORE POINTERS

;HERE IF USER IS LOGGED IN -- JUST DO THE LOOKUPS
HILK.7:	SETZM	LOWPTR		;MAKE SURE WE READ FILE
	LOOKUP	TI,T1		;LOOK FOR THE FILE
	  POPJ	P,0		;FILE NOT FOUND
	JRST	CPOPJ1		;FILE SETUP
;SUBROUTINE TO FIND A FILE IN HISEG TBALES
;CALL WITH:
;	T1 = FILE NAME
;	T2 = EXTENSION
;	T3 = DATE/TIME/PROTECTION/MODE WORD
;	T4 = PPN
;	T6 = DEVICE
;	PUSHJ	P,HIFIND
;	  HERE IF NOT IN TABLE
;	HERE IF IN TABLE (INDEX IN I)
HIFIND:	MOVSI	I,-N$HSGF	;AOBJN PTR
HFND.1:	CAME	T6,HS$DEV(I)	;RIGHT DEVICE
	JRST	HFND.2		;NO.
	CAME	T1,HS$FIL(I)	;RIGHT FILE
	JRST	HFND.2		;NO.
	CAME	T2,HS$EXT(I)	;RIGHT EXTENSION
	JRST	HFND.2		;NO
	CAME	T4,HS$PPN(I)	;RIGHT PPN
	JRST	HFND.2		;NO
	CAMN	T3,HS$DAT(I)	;RIGHT DATE/TIME
	JRST	CPOPJ1		;YES--WE WON
	MOVE	T3,JOBN		;NO, THE FILE MUST HAVE CHANGED
	CAMN	T3,LOKJOB	;DO WE ALREADY OWN THE INTERLOCK?
	JRST	HFND.3		;YES, DON'T TRY TO GET IT AGAIN THEN
	PUSHJ	P,HILOCK	;NO, GET THE INTERLOCK THEN
	  POPJ	P,		;OH, BUGGER IT!  IT AIN'T THERE.
HFND.3:	SETZB	T3,HS$DEV(I)	;FORGET THAT WE EVER SAW IT
	EXCH	T3,HS$PTR(I)	;GET AND ZERO THE MEMORY POINTER
	MOVE	T8,T3		;SAVE IT INCASE IT'S THE END OF MEMORY

;PERFORM A RATHER TEDIOUS LOOP TO SEE IF THIS IS THE LAST FILE IN MEMORY.

	ILDB	CH,T3		;GET A CHARACTER
	JUMPN	CH,.-1		;LOOP IF THERE'S MORE GETTING TO BE HAD
	ILDB	CH,T3		;SEEM TO REMEMBER THAT FILES END WITH 2 NULLS
	JUMPN	CH,.-3		; ...
	CAMN	T3,HIPTR	;ARE WE AT THE END OF MEMORY?
	MOVEM	T8,HIPTR	;YES, RECLAIM THE SPACE
	POPJ	P,		;AND SAY IT ISN'T HERE
HFND.2:	AOBJN	I,HFND.1	;LOOP OVER WHOLE TABLE
	POPJ	P,0		;NOT THERE
;SUBROUTINE TO INTERLOCK THE HISEG
;CALL WITH:
;	PUSHJ	P,HILOCK
;	  ERROR RETURN IF CAN'T GET HISEG
;	RETURN HERE
;NOTE: HISEG IS RELEASED ON POPJ
;
HILOCK:	MOVE	T8,[[XWD 4,INTLOC
		    XWD 0,ER.ICC!ER.OFL
		    0
		    0],,INTBLK]
	BLT	T8,INTBLK+3
	MOVEI	T8,INTBLK	; POINT TO TRAP BLOCK
	MOVEM	T8,.JBINT	; SET FOR TRAPPING!
TR.SET:	MOVEI	T8,0		;CLEAR USER WRITE PROTECT
	SETUWP	T8,		; ..
	  JRST	[SETZM NOINT
		POPJ	P,0]
	SETOM	NOINT		; NOT INTERRUPTABLE
	AOSN	LOCKWD		;GET THE INTERLOCK
	JRST	HLCK.2		;IF THE RESULT IS ZERO WE WON
	SETZM	NOINT		;DIDN'T GET INTERLOCK, MAKE
				; INTERRUPTABLE AGAIN
HLCK.1:	MOVE	T8,MYBIT	;BIT SAYING WE ARE WAITING FOR THE INTERLOCK
	IORM	T8,@MYWRD	;LIGHT FOR OWNER TO SEE
	MOVEI	T8,^D15000	;SLEEP FOR 15 SECONDS
	HIBER	T8,		;
	JRST	[MOVEI	T8,10	;SLEEP 8 SECONDS
		 SLEEP	T8,	;SLEEP IF HIBER NOT IMPLEMENTED
		 JRST	.+1]	;CONTINUE
	MOVE	T8,MYBIT	;GET BIT AGAIN
	ANDCAM	T8,@MYWRD	;NOT ACTUALLY WAITING ANYMORE
	PUSHJ	P,HIFIND	;SEE IF THE FILE IS IN CORE YET
	  CAIA			;NO, MUST WAIT FOR IT
	JRST	UNLK.4		;RETURN WITHOUT INTERLOCK
	SETOM	NOINT		;LOCK OUT INTS.
	AOSN	LOCKWD		;OPEN YET??
	 JRST	HLCK.2		;YES. PROCEED
	SETZM	NOINT		;STILL LOCKED. BETTER INVESTIGATE THIS...
HLCK.5:	PUSH	P,LOKJOB	;SAVE A COPY FOR CHECKING
	PUSH	P,LOKTTY	;GET HIM TOO
	HRLZ	T8,-1(P)	;POINT TO INTERLOCKER'S JBTSTS
	GETTAB	T8,		;GET IT
	  JRST	FORCE		;??? FORCE THE LOCK
	TLC	T8,440000	;RUN+JNA
	TLCE	T8,440000	;BOTH ON?
	  JRST	FORCE		;NO, SOMETHING WRONG
	HRLZ	T8,-1(P)	;SET UP JOB # AGAIN
	HRRI	T8,.GTPRG	;LOOK FOR PROGRAM NAME
	GETTAB	T8,		;GET IT
	  JRST	FORCE		;TOO BAD
	CAME	T8,['INITIA']	;RIGHT GUY?
	  JRST	FORCE		;NO, TOO BAD
	MOVE	T8,(P)		;GET OWNER'S TTY UDX
	DEVTYP	T8,		;LOOK AT TTY'S PROPERTIES
	  JRST	FORCE		;TOO BAD
	LDB	T8,[POINTR(T8,TY.JOB)]	;GET JOB # USING IT
	CAME	T8,-1(P)	;RIGHT GUY?
	 JRST	FORCE		;NO, GOT HIM!!
	SUB	P,[2,,2]	;RESTORE THE PDL
	JRST	HLCK.1		;GOOD LOCK, RETURN
HLCK.2:	POP	P,T8		;GET RETURN PC
	PUSH	P,JOBN		;GET OUR JOB #
	POP	P,LOKJOB	;STORE FOR OTHERS
	PUSH	P,TERNUM	;AND OUR LINE
	POP	P,LOKTTY	;SAVE IT AWAY
	PUSHJ	P,1(T8)		;SKIP CALL COROUTINE
UNLOCK:	  SOS	(P)		;INDICATE FAILURE
	MOVE	T8,JOBN		;GET OUR JOB NUMBER
	CAME	T8,LOKJOB	;WE OWN THE INTERLOCK?
	JRST	UNLK.4		;NO
	MOVE	T8,TERNUM	;GET OUR TTY NUMBER
	CAME	T8,LOKTTY	;WE OWN IT?
	JRST	UNLK.4		;NO
	SETZM	LOKJOB		;CLEAR OWNER
	SETZM	LOKTTY		;AND OWNER'S TTY
	SETOM	LOCKWD		;RESET INTERLOCK
	PUSH	P,T1		;SAVE A FEW ACS
	PUSH	P,T2		;...
	PUSH	P,T3		;...
	MOVSI	T1,-JBWATL	;NUMBER OFF ENTRIES IN JOBWAT TABLE
	SKIPN	T2,JOBWAT(T1)	;ANYBODY WAITING HERE
	AOBJN	T1,.-1		;NO, LOOK SOME MORE
	JUMPGE	T1,UNLK.1	;NOBODY WAITING FOR THE INTERLOCK
	JFFO	T2,.+1		;GET WAITERS BIT
	MOVEI	T2,(T1)		;GET THE WORD NUMBER
	IMULI	T2,^D36		;TO A JOB NUMBER
	ADDI	T2,(T3)		;...
	WAKE	T2,		;WAKE UP THE JOB
	  JFCL			;OH WELL
	MOVSI	T2,(1B0)	;FIGURE OUT THE BIT TO CLEAR
	MOVNS	T3		;...
	LSH	T2,(T3)		;POSITION IT
	ANDCAM	T2,JOBWAT(T1)	;SO OTHER INITIAS DONT TRIP OVER A STALE JOB
UNLK.1:	POP	P,T3		;RESTORE
	POP	P,T2		;...
	POP	P,T1		;...
UNLK.4:	MOVEI	T8,1		;GO AND WRITE PROTECT
	SETUWP	T8,		; THE HISEGMENT AGAIN
	  JFCL
	SETZM	.JBINT		; TURN OFF TRAPPING
	SETZM	NOINT		; CLEAR NO INTERRUPT WORD
	JRST	CPOPJ1		;GIVE SKIP RETURN

;HERE TO FORCE THE LOCK
FORCE:	AOS	FRCTRY		;COUNT ATTEMPTS TO FORCE THE LOCK
	MOVE	T8,LOKJOB	;GET CURRENT OWNER OF LOCK
	CAME	T8,-1(P)	;SAME AS WE CHECKED?
	JRST	FORCE1		;NO
	MOVE	T8,LOKTTY	;GET TTY OF OWNER
	CAME	T8,0(P)		;SAME AS WE CHECKED?
	JRST	FORCE1		;NO
	SETZM	LOKJOB		;NO OWNER
	SETZM	LOKTTY		;  OR TTY
	SETOM	LOCKWD		;GIVE UP INTERLOCK
	AOS	FRCCNT		;COUNT NUMBER OF ACTUAL FORCES
	SUB	P,[2,,2]	;RESTORE PDL
	JRST	HLCK.1		;RE-JOIN THE COMPETITION
FORCE1:	SUB	P,[2,,2]	;RESTORE THE PDL
	JRST	HLCK.5		;CHECK AGAIN
; HERE TO PROCESS CONTROL-C INTERCEPT
INTLOC:	MOVEM	T1,TEMP1	; SAVE T1
	HLRZ	T1,INTBLK+3	; GET REASON FOR INTERRUPT
	CAIN	T1,ER.OFL	; DSK OFF LINE?
	JRST	OFLPRC		; YES, GO PROCESS IT
	CAIE	T1,ER.ICC	; NO, CONTROL-C INTERRUPT?
	HALT			; NO, MY GOD!
	SKIPL	NOINT		; INTERRUPTABLE?
	EXIT		; YES, SO QUIT IF THAT'S WHAT HE WANTS
	OUTSTR	[ASCIZ /
Interlocked/]
OFLENT:	EXCH	T1,TEMP1	; RESTORE T1
	PUSH	P,INTBLK+2	; SETUP FOR POPJ RETURN
	SETZM	INTBLK+2	; SET FOR ANOTHER TRAP
BADTRP:	POPJ	P,0		; RETURN TO SEQUENCE
; HERE ON DSK OFF LINE INTERRUPTS
OFLPRC:	MOVEI	T1,STRUCO	; GET DESIRED RETURN ADDRESS
	MOVEM	T1,INTBLK+2	; AND FUDGE IT
	JRST	OFLENT		; GO DO THE STANDARD STUFF
SUBTTL	SUBROUTINE TO READ FROM FILE
;SKIP RETURNS WITH VALUE IN CH
;NON-SKIPS IF END OF LINE (CH=-1 AT EOF)

FILIN:	TXNE	F,F.EOF		;SEE IF EOF
	JRST	FLIN.3		;YES--REPEAT THAT
	ILDB	CH,LOWPTR	;GET A BYTE FROM HISEG
	JUMPN	CH,FLIN.1	;JUMP IF VALID DATA
	SKIPE	LOWPTR		;SKIP IF WE NEVER SETUP HISEG
	JRST	FLIN.3		;ELSE THIS IS THE EOF MARK
	SOSGE	IBF+.BFCTR	;COUNT DOWN BYTES
	JRST	FLIN.2		;EMPTY--GET NEXT BUFFER
	IBP	IBF+.BFPTR	;INCREMENT TO NEXT BYTE
REPEAT 0,<			;NO LONGER USED NOW THAT WE DON'T READ AUXACC.SYS
	TXNE	F,F.BIN		;SEE IF BINARY FILE
	JRST	[LDB  CH,IBF+.BFPTR
		 JRST CPOPJ1]	;IF SO, RETURN WORD
>	;END REPEAT 0
	MOVE	CH,@IBF+.BFPTR	;GET NEXT WORD
	TRNE	CH,1		;SEE IF SEQUENCED
	JRST	[AOS IBF+.BFPTR	;YES--SKIP 5
		 MOVNI CH,5	; MORE CHARS
		 ADDM CH,IBF+.BFCTR
		 JRST FILIN]	;AND TRY AGAIN
	LDB	CH,IBF+.BFPTR	;GET CHARACTER
	JUMPE	CH,FILIN	;IGNORE NULLS
	CAIE	CH,.CHCRT	;ALSO C.RET.
	CAIN	CH,.CHDEL	; AND DELETE
	JRST	FILIN		;--JUST LOOP FOR NEXT
FLIN.1:	CAIL	CH,.CHLFD	;IF LESS THAN LINE FEED
	CAILE	CH,.CHFFD	; OR GT FORM FEED,
	JRST	CPOPJ1		; GIVE SKIP RETURN
	POPJ	P,		;ELSE, GIVE END OF LINE

FLIN.2:	IN	TI,		;INPUT NEXT BUFFER
	  JRST	FILIN		;LOOP IF OK
	STATZ	TI,IO.ERR	;SEE IF ERROR BITS
	INTERR	(IOE,<I/O Error>,<JRST FLIN.3>)
FLIN.3:	SETOM	CH		;SET FLAG
	TXO	F,F.EOF		;SET END FLAG
	POPJ	P,		;RETURN
SUBTTL	SUBROUTINES
SUBTTL	SUBROUTINE TO LOGIN A JOB
;CALL:	T2/ PROJECT,,PROGRAMMER NUMBER
;	T4/ "USER" NAME IN SIXBIT
;	PUSHJ	P,LOGIN$
;RETURNS IF SUCCESSFUL

LOGI12:	TXO	F,F.PRIV	;FLAG TO GET ALL PRIVILEGES
	MOVE	T2,FFAPPN	;GET [1,2]
	TXNN	F,F.REMO	;SEE IF REMOTE OPR
	JRST	LOGI.1		;NO--PROCEED
	HLRZ	T1,NL.ME	;YES--GET STATION NUMBER
	HRLI	T2,100(T1)	;USE [100+SN,2]
	JRST	LOGIN$		;AND GO LOGIN
;HERE IF LOGIN TO [1,2]
LOGI.1:	TXNE	F,F.LOGI	;SEE IF LOGGED IN
	JRST	LOGIN$		;YES--NO SPECIAL TEST
	SETOM	T3		;NO--GET MY TTY
	GETLCH	T3		; CHARACTERISTICS
	TXNE	T3,GL.ITY!GL.DSL!GL.REM ;MAKE SURE LOCAL
	JRST	KILJOB		;NO--GO EXIT INSTEAD
LOGIN$:	TXNN	F,F.LOGI	;SEE IF ALREADY LOGGED IN
	JRST	LOGI.2		;NO--GO LOG IT IN
	TXNN	F,F.LOGX	;SEE IF OK TO BE DIFFERENT
	CAMN	T2,MYPPN	;NO--SEE IF DIFFERENT
	POPJ	P,		;NO--RETURN
	JRST	KILJOB		;YES--GO EXIT INSTEAD
LOGI.2:	MOVSI	T1,.STOPP	;CODE TO SET (NO) OPERATOR PRIVS
	HRRI	T1,.OBNOP	;SET NO OPERATOR PRIVS BY DEFAULT
	TXNE	F,F.PRIV	;NEED PRIVS?
	HRRI	T1,.OBSOP	;YES, MAKE THIS JOB A SYSTEM OPR
	TXNE	F,F.REMO	;ARE WE BECOMING A REMOTE OPR?
	HRRI	T1,.OBROP	;YES, ONLY GIVE REMOTE OPR PRIVS
	SETUUO	T1,		;GIVE THE APPROPRIATE PRIV
	 JFCL			;OH WELL, WE TRIED!
	PUSHJ	P,ACCT$		;GO SET THE ACCOUNT STRING
	 JRST	[SKIPN	ACTSTR		;ERROR. DO WE EVEN HAVE A STRING?
		 INTWRN	(NAS,<No account string specified in TTY.INI
>,<JRST .+1>)
		 INTWRN	(ESA,<Error setting account string
>,<JRST .+1>)]
	MOVE	T1,[.STUVM,,[^D16384,,^D16384]] ;SET THE PHYSICAL AND VIRTUAL
	SETUUO	T1,		;  PAGE LIMITS FOR THIS JOB
	  SKIPA	T1,[.STUVM,,[^D512,,^D512]] ;FAILED?  TRY LOWER LIMITS
	SKIPA			;OK, GO ON
	SETUUO	T1,		;TRY TO SET THE LOWER LIMITS
	 JFCL			;NOT REALLY THAT IMPORTANT I GUESS
	MOVE	T1,[-3,,T2]	;SETUP POINTER FOR UUO
	MOVX	T3,%CNPRV	;FIND OUT WHAT PRIVILEGES
	GETTAB	T3,		;  WE'RE ALLOWED TO SET
	 MOVSI	T3,-1		;ERROR--SET ALL DEC PRIVILEGES.
	TXNN	F,F.PRIV	;SEE IF PRIVILEGES NEEDED
	SETZ	T3		;NO--CLEAR THEM
	TXNE	F,F.REMO	;UNLESS REMOTE OPR
	MOVE	T3,[JP.NSP]	;WHO ONLY NEEDS UNSPOOLING
	MOVEM	T2,REQPPN	;SAVE REQUESTED PPN
	LOGIN	T1,		;TRY

	TXNN	F,F.IPCQ	;DO WE WANT BIG IPCF QUOTAS?
	JRST	LOGI.3		;NO, DON'T SET THEM THEN.
	MOVE	T1,JOBN		;GET OUR JOB NUMBER
	MOVEM	T1,IPCCBK+.IPCS1 ;STORE IN THE [SYSTEM]IPCC BLOCK
	MOVX	T1,IP.CMP!<.IPCCC,,.IPCMP+1> ;GET THE HEADER WORD
	MOVEM	T1,IPCMHD+.IPCMF ;STORE AS THE IPCFM FUNCTION HEADER
	MOVEI	T1,IPCCBK	;GET THE ADDRESS OF THE IPCC BLOCK
	MOVEM	T1,IPCMHD+.IPCMP ;STORE
	MOVE	T1,[3,,.IPCQS]	;GET THE LENGTH AND FUNCTION
	MOVEM	T1,IPCCBK+.IPCS0 ;TO SET THE PID QUOTA
	MOVEI	T1,777		;GET A LARGE PID QUOTA
	MOVEM	T1,IPCCBK+.IPCS2 ;STORE
	MOVEI	T1,IPCMHD	;POINT TO THE HEADER
	IPCFM.	T1,		;SET THE PID QUOTA
	 JRST	LOGI.3		;ERROR?  SKIP IT
	HLLOS	IPCCBK+.IPCS2	;SET LARGE SEND AND RECEIVE QUOTAS
	MOVEI	T1,.IPCSQ	;GET THE FUNCTION TO SET SEND/RCV QUOTAS
	HRRM	T1,IPCCBK+.IPCS0 ;STORE IT
	MOVEI	T1,IPCMHD	;POINT TO THE HEADER AGAIN
	IPCFM.	T1,		;SET THE SEND/RECEIVE QUOTAS
	 JFCL			;OH WELL ...

LOGI.3:	TTYSTR	[ASCIZ /.LOGIN /]
	HLRZ	T1,REQPPN	;GET PROJECT
	PUSHJ	P,TYPOCT	;TYPE IN OCTAL
	TTYCHR	","		;SEPARATE
	HRRZ	T1,REQPPN	;GET PROGRAMMER
	PUSHJ	P,TYPOCT	;TYPE IN OCTAL
	TTYSTR	CRLFM
;HERE TO LOCATE USER TO NODE SPECIFIED IN /LOCATE:NN OR
;IN THE ABSENCE OF A LOCATE COMMAND, TO THE CENTRAL SITE
;IF HE IS BEING LOGGED IN ON A NODE WITHOUT AN LPT

LOCAT$:	SKIPGE	T1,LOCAT	;DID USER SPECIFY LOCATE?
	 JRST	LOCAT0		;YES--LOCATE HIM THERE
LOCAT2:	MOVEI T1,.GTLOC		;GETTAB FOR NODE # OF CENTRAL SITE
	GETTAB	T1,		;GET CENTRAL SITE NODE NUMBER
	  JRST	NOLOC		;MONITOR MUST NOT SUPPORT NETWORKS
	HRROI	T2,.GTLOC	;THIS JOB'S LOCATION
	GETTAB	T2,		;GET THAT
	  JRST	NOLOC		;NO NETWORK SOFTWARE
	CAMN	T1,T2		;ALREADY LOCATED AT CENTRAL SITE?
	JRST	NOLOC		;YES, NO POTENTIAL PROBLEMS THEN
	MOVEM	T2,NODLOC	;STORE THIS JOB'S LOCATION IN NODE BLOCK
	MOVEI	T2,4		;LENGTH OF THE ARGUMENT BLOCK
	MOVEM	T2,NODLEN	;STORE IN NODE UUO ARGUMENT BLOCK
	MOVEI	T2,.TYLPT	;DEVICE TYPE
	MOVEM	T2,NODDEV	;STORE THAT IN THE ARGUMENT BLOCK
	MOVE	T2,[.NDRCI,,NODBLK]  ;NODE UUO ARGUMENT
	NODE.	T2,		;GET NODE CONFIGURATION INFORMATION
	  JRST	NOLOC		;NOT IMPLEMENTED?
	HLRZ	T2,NODDEV	;NUMBER OF LPT'S AT THIS NODE
	JUMPN	T2,NOLOC	;JUMP IF THERE ARE SOME
	JRST	LOCAT1		;NO LPT'S AT THIS NODE,
				;LOCATE JOB AT CENTRAL SITE

LOCAT0:	HRRZS	T1		;CLEAR LH
	CAIG	T1,^D77		;NODE NUMBER .GT. 77?
	 JRST	LOCAT3		;NO--CONTINUE
	INTWRN	(NTL,NODE NUMBER TOO LARGE)
	JRST	LOCAT2		;CANNOT LOCATE HIM, SAME AS IF NO SWITCH
LOCAT3:	IDIVI	T1,^D10		;CONVERT NODE TO OCTAL
	LSH	T1,3		;...
	ADD	T1,T2		;...

LOCAT1:	LOCATE	T1,		;LOCATE USER

	OUTSTR	[ASCIZ /%INTLUF LOCATE UUO failed.
/]
;HERE TO FIND THE PPN IN SYS:AUXACC.SYS IF POSSIBLE
;IF ANY PROBLEMS, PROCEED ONWARD AND DUPLICATE THE SYS S/L

NOLOC:
REPEAT 0,<			;NO LONGER USED DUE TO ACTDAE
	MOVE	T1,[UU.PHS!.IOBIN]	;BINARY MODE, PHYSICAL ONLY.
	MOVSI	T2,'SYS'	;SYS:
	MOVEI	T3,IBF		;INPUT BUFFER HEADER
	OPEN	TI,T1		;GET DEVICE
	  JRST	STRN.6		;GIVE UP IF UNAVAILABLE!
	MOVE	T1,['AUXACC']	;FILE
	MOVSI	T2,'SYS'	; NAMED
	SETZB	T3,T4		; SYS:AUXACC.SYS[-]
	LOOKUP	TI,T1		;GET IT
	  JRST	STRN.6		;GIVE UP IF MISSING
	TXO	F,F.BIN		;TELL INPUTTER BINARY
	TXZ	F,F.EOF		;CLEAR EOF FLAG
	PUSHJ	P,FILIN		;GET FIRST WORD
	  JRST	STRN.6		;IF NULL FILE, GIVE UP
	JUMPN	CH,STRN.6	;ONLY FORMAT V.0 WORKS
;BACK HERE TO LOOP OVER PPNS IN FILE
STRN.1:	PUSHJ	P,FILIN		;GET INDICATOR
	  JRST	STRN.6		;OUR PPN MISSING!
	AOJN	CH,STRN.6	;-1 IS FLAG
	PUSHJ	P,FILIN		;GET SIZE
	  JRST	STRN.6		;BAD FILE
	SOSGE	T6,CH		;GET COUNT LESS PPN
	JRST	STRN.6		;ERROR IF NEGATIVE SIZE
	PUSHJ	P,FILIN		;GET PPN
	  JRST	STRN.6		;BAD FILE
	MOVE	T1,CH		;GET PPN
	XOR	T1,REQPPN	;COMPARE TO DESIRED
	TRC	CH,-1		;SEE IF FILE IS WILD
	TRNN	CH,-1		;TEST WILD
	TRZ	T1,-1		;YES--PROGRAMMER ALWAYS MATCHES
	JUMPE	T1,STRN.3	;JUMP IF MATCH!!!
;LOOP TO SKIP ENTRY WE WANT TO IGNORE
STRN.2:	PUSHJ	P,FILIN		;DISCARD
	  JRST	STRN.6		;(BAD FILE)
	SOJG	T6,STRN.2	;UNTIL COUNT EXHAUSTED
	JRST	STRN.1		;THEN TRY NEXT PPN
;HERE WHEN ENTRY MATCHES
STRN.3:	IDIVI	T6,5		;GET STR COUNT
	JUMPN	T7,STRN.6	;ERROR IF NOT MULTIPLE OF 5
	MOVEI	T7,1		;START INDEX INTO ANSWER
;LOOP OVER STRS FOR THIS PPN
STRN.4:	JUMPE	T6,STRN.5	;EXIT WHEN DONE
	CAIGE	T7,ENDSTR-STRBLK  ;SEE IF OVERFLOW
	PUSHJ	P,FILIN		;NO--GET NEXT STR
	  JRST	STRN.5		;EXIT IF EOF (EVEN THO ERROR)
	MOVEM	CH,STRBLK(T7)	;SAVE STR NAME
	SETZM	STRBLK+1(T7)	;CLEAR PPN OF THIS STR
	PUSHJ	P,FILIN		;GET/IGNORE NEXT WORD
	  JRST	STRN.5		;(ERROR)
	PUSHJ	P,FILIN		;GET/IGNORE NEXT WORD
	  JRST	STRN.5		;(ERROR)
	PUSHJ	P,FILIN		;GET/IGNORE NEXT WORD
	  JRST	STRN.5		;(ERROR)
	PUSHJ	P,FILIN		;GET STATUS BIT WORD
	  JRST	STRN.5		;(ERROR)
	MOVEM	CH,STRBLK+2(T7)	;SAVE BITS
	MOVE	T1,[1,,T2]	;POINTER FOR DSKCHR
	MOVE	T2,STRBLK(T7)	;GET STR NAME
	DSKCHR	T1,		;GET ITS STATUS
	  SETOM	T1		;ERROR
	TXC	T1,<.DCTFS_<ALIGN.(DC.TYP)>>
	TXNN	T1,<DC.SAF!DC.NNA!DC.TYP>  ;MUST BE MULTI-ACCESS
			; ,ACCESSIBLE, AND A FILE-STRUCTURE
	ADDI	T7,3		;YES--ADVANCE ANSWER POINTER
	SOJG	T6,STRN.4	;LOOP OVER ALL STRS THIS PPN
;HERE WHEN A LIST HAS BEEN BUILT IN CORE
STRN.5:	RELEAS	TI,		;RELEASE INPUT CHANNEL
	TXZ	F,F.BIN!F.EOF	;CLEAR BINARY INDICATOR AND EOF
	MOVE	T1,T7		;POSITION COUNTER
	JRST	STRN.8		;PROCEED TO TELL MONITOR

;HERE WHEN CAN'T USE SYS:AUXACC.SYS FOR ANY REASON
STRN.6:	RELEAS	TI,		;RELEASE INPUT CHANNEL
	TXZ	F,F.BIN!F.EOF	;CLEAR BINARY INDICATOR AND EOF
>	;END REPEAT 0 FOR AUXACC.SYS
;HERE TO COPY THE SYS: SEARCH LIST

	SETZM	GETSTR		;SET GOBSTR ARGS TO JOB 0
	MOVE	T1,SYSPPN	;GET [1,4]
	MOVEM	T1,GETSTR+1	;SET SYS PPN AS PPN IN QUESTION
	SETOM	GETSTR+2	;SET TO START OF LIST
	MOVNI	T1,2		;PRESET ANSWER BLOCK

STRN.7:	MOVE	T3,[5,,GETSTR]	;GET POINTER FOR GOBSTR
	ADDI	T1,3		;ADVANCE ANSWER POINTER
	CAIGE	T1,ENDSTR-STRBLK  ;SEE IF FULL
	GOBSTR	T3,		;NO--GET NEXT STR
	  JRST	STRN.8		;CAN'T--GO SEE IF CAN SET IT UP
	SKIPE	T3,GETSTR+2	;GET STR NAME
	CAMN	T3,[-1]		;CHECK FOR FENCE
	JRST	STRN.8		;YES--GO SEE IF CAN SET IT UP
	MOVEM	T3,STRBLK(T1)	;OK--STORE STR
	MOVE	T3,GETSTR+3	;GET PPN JUST IN CASE IT EVER COUNTS
	MOVEM	T3,STRBLK+1(T1)  ;STORE IN STRUUO BLOCK
	MOVE	T3,GETSTR+4	;GET STATUS BITS
	MOVEM	T3,STRBLK+2(T1)  ;STORE IN BLOCK
	JRST	STRN.7		;LOOP BACK FOR MORE

STRN.8:	SETZM	STRBLK		;SET FUNCTION FOR STRUUO
	MOVE	T3,['DSKB  ']	;SET FOR DSKB JUST IN CASE NONE
	SKIPN	STRBLK+1	;SEE IF ANY STR SETUP
	MOVEM	T3,STRBLK+1	;NO--FILL IN DEFAULT
	HRLZI	T1,(T1)		;GET LENGTH OF LIST
	TLNN	T1,-2		;SEE IF ANYTHING THERE
	HRLZI	T1,4		;NO--SET FOR AT LEAST ONE STR
	HRRI	T1,STRBLK	;POINT TO BLOCK
	STRUUO	T1,		;TELL MONITOR
	  JFCL			;WELL--NICE TRY
	POPJ	P,		;RETURN IF SUCCESSFUL
;HERE TO SET THE ACCOUNT STRING FOR A JOB THAT WE'RE GOING TO LOG IN.
;IF ONE IS SET, USE IT.  OTHERWISE, GO LOOK FOR A SYSTEM DEFAULT ACCOUNT
;STRING.  RETURN ERROR IF ACCOUNT VALIDATION IS REQUIRED AND WE FAILED
;IN SOME WAY.

;DESTROYS T1 AND T3

ACCT$:	MOVX	T3,%CNST2	;GET THE SECOND MONITOR
	GETTAB	T3,		; STATES WORD
	  SETZ	T3,		;WELL, ASSUME NO STATES
	MOVX	T1,<.ACTRD,,[EXP 2,0,ACTSTR]> ;GET ACCT. ARG BLOCK
	SKIPN	ACTSTR		;DO WE HAVE AN ACCOUNT STRING?
	 ACCT.	T1,		;NO, READ JOB ZERO'S ACCOUNT STRING
	  JFCL			;ERRORS CAN ALWAYS HAPPEN
	MOVX	T1,<.ACTCH,,[EXP 1,<POINT 7,ACTSTR>]> ;GET ACCT. ARGUMENT BLOCK
	SKIPE	ACTSTR		;DO WE HAVE AN ACCOUNT STRING YET?
	ACCT.	T1,		;YES, GO SET IT
	 TXNN	T3,ST%ACV	;ERROR, ACCOUNT VALIDATION REQUIRED?
	  AOS	(P)		;NOPE.  NO ERROR HERE
	POPJ	P,		;RETURN
SUBTTL	SUBROUTINE TO TYPE SIGN ON MESSAGE
;CALL:	PUSHJ	P,SIGNON
;USES ALL TEMPS

SIGNON:	MOVE	T1,FLNAME	;SEE IF USER
	TRNN	T1,1		;  SAID NONAME
	TXNE	F,F.NOHD	;SEE IF HEADER SUPPRESSED
	POPJ	P,		;YES--RETURN QUICKLY
	TTYSTR	CRLFM
	MOVSI	T7,-5		;SETUP POINTER TO READ
	MOVX	T6,%CNFG0	;SYSTEM HEADER LINE

SIGN.1:	MOVE	T5,T6		;MAKE POINTER
	GETTAB	T5,		;GET THE HEADER
	  MOVEI	T5,0		;DON'T REALLY CARE IF THIS FAILS
	MOVEM	T5,T1(T7)	;STORE IN ARRAY
	ADD	T6,[1,,0]	;ADVANCE INDEX
	AOBJN	T7,SIGN.1	;LOOP FOR TITLE

	MOVEI	T6,0		;GUARANTEE CLEAN END
	TTYSTR	T1		;TYPE HEADER
	TTYCHR	" "		;SEND A SPACE
	MSTIME	T4,		;GET TIME OF DAY
	IDIVI	T4,^D1000	;CONVERT TO SECONDS
	IDIVI	T4,^D3600	;GET HOURS
	PUSHJ	P,TYPD2		;TYPE HOURS
	MOVE	T4,T5		;RE-POSITION REMAINDER
	IDIVI	T4,^D60		;GET MINUTES
	PUSHJ	P,TYPD2C	;TYPE COLON, MINUTES
	MOVE	T4,T5		;GET SECONDS
	PUSHJ	P,TYPD2C	;TYPE COLON, SECONDS
	TTYCHR	" "		;SEND A SPACE
	MOVE	T2,ME		;GET TTY NAME
	PUSHJ	P,TYPSIX	;TYPE IT
	TTYSTR	[ASCIZ / system /]
	MOVE	T1,[%CCSER]	;GET CPU0 SERIAL NUMBER
	GETTAB	T1,		;...
	MOVE	T1,APRSN	;USE DEFAULT
	MOVNI	T7,6*2		;PRESET FOR 6 CPU'S
SIGN.2:	PUSHJ	P,TYPDEC	;LIST IN DECIMAL
	AOS	T1,T7		;TRY NEXT CPU
	ADD	T1,[%CCSER+6*2+1]  ;GET APR S/N
	GETTAB	T1,		; FROM MONITOR
	  MOVEI	T1,0		;STOP IF NO CPU
	JUMPLE	T1,SIGN.3	;END LOOP IF JUNK
	TTYCHR	"/"		;SEPARATE
	AOJL	T7,SIGN.2	;LOOP UNTIL DONE

;CONTINUED ON NEXT PAGE
;CONTINUED FROM PREVIOUS PAGE

SIGN.3:	TTYSTR	[ASCIZ /
Connected to Node /]
	MOVEI	T1,MYNODE	;POINT TO MY NODE NAME'S STRING BLOCK
	PUSHJ	P,TYPAS8	;TYPE THE NODE NAME
	HLRZ	T1,MYNUMB+.NSASL ;GET THE LENGTH OF THE NODE NUMBER STRING
	JUMPE	T1,SIGN3B	;SKIP THIS IF NOTHING THERE
	TTYSTR	[ASCIZ /(/]
	HLRZ	T1,NL.ME	; GET NODE NUMBER
	PUSHJ	P,TYPOCT
	TTYSTR	[ASCIZ /)/]	;CLOSE OFF THE NODE NUMBER
SIGN3B:	HLRZ	T1,MYTERM+.NSASL ;SEE IF ANY TERMINAL NAME STRING
	JUMPE	T1,SIGN3A	;NOPE, DON'T TRY TO TYPE IT THEN
	TTYSTR	[ASCIZ / Line /];YEP.  SAY WE'RE GOING TO TYPE THE LINE NAME
	MOVEI	T1,MYTERM	;POINT TO THE STRING BLOCK
	TXNN	F,F.ANFL!F.DCNL	;IS THIS AN ANF-10 OR CTERM CONNECTION?
	JRST	[PUSHJ	P,TYPAS8	;NO, JUST TYPE THE NAME STRING IN FULL
		 JRST	SIGN3A]		;AND CONTINUE BELOW
	TTYSTR	[ASCIZ /# /]	;YES, SAY THIS IS A TERMINAL NUMBER
	PUSHJ	P,GET826	;CONVERT PORT NAME TO SIXBIT
	PUSHJ	P,XPNTTY	;EXPAND THE TTY NAME
	PUSHJ	P,CVTBIN	;GET THE LINE NUMBER OUT OF IT
	MOVE	T1,WD		;COPY THE LINE NUMBER
	PUSHJ	P,TYPOCT	;GO TYPE THE LINE NUMBER
SIGN3A:	TTYSTR	CRLFM
	TXNN	F,F.LOGI	;SEE IF LOGGED IN
	POPJ	P,		;NO--ALL DONE
	TTYSTR	[ASCIZ /Job /]
	MOVE	T1,JOBN		;GET JOB NUMBER
	PUSHJ	P,TYPDEC	;TYPE IN DECIMAL
	HRROI	T2,.GTNM1	;GET USER'S NAME
	GETTAB	T2,		; FROM MONITOR
	  JRST	SIGN.4		;IGNORE IF UNAVAILABLE
	JUMPE	T2,SIGN.4	;OR MISSING
	TTYSTR	[ASCIZ /   User /]
	PUSHJ	P,TYPSX6	;TYPE SIX CHARACTERS
	HRROI	T2,.GTNM2	;GET 2ND HALF OF NAME
	GETTAB	T2,		; FROM MONITOR
	  MOVEI	T2,0		;(IMPOSSIBLE)
	PUSHJ	P,TYPSIX	;TYPE IN SIXBIT AND RETURN
	TTYSTR	[ASCIZ /   [/]	;THEN ISSUE PPN
	HLRZ	T1,MYPPN	;GET MY PROJECT
	PUSHJ	P,TYPOCT	;ISSUE IN OCTAL
	TTYCHR	","		;SEPARATE WITH COMMA
	HRRZ	T1,MYPPN	;GET MY PROGRAMMER
	PUSHJ	P,TYPOCT	;ISSUE IN OCTAL
	TTYCHR	"]"		;END PPN
SIGN.4:	TTYSTR	1,CRLFM
SUBTTL	SUBROUTINE TO TYPE KSYS MESSAGE
;CALL:	PUSHJ	P,TYKSYS
;USES ALL TEMPS

TYKSYS:	MOVX	T1,%NSKTM	;GET TIME TO GO
	GETTAB	T1,		; FROM MONITOR
	  POPJ	P,		;RETURN IF NOT IMPLEMENTED
	SKIPE	T1		;SEE IF SET
	CAIL	T1,^D24*^D60	; AND LESS THAN 24 HRS.
	POPJ	P,		;NO--RETURN
	JUMPL	T1,TYKS.2	;SEE IF ALREADY DOWN
	TTYSTR	[ASCIZ /Timesharing will cease in /]
	PUSH	P,T1		;SAVE TIME
	IDIVI	T1,^D60		;GET HOURS
	JUMPE	T1,TYKS.1	;JUMP IF LT 1 HOUR
	PUSHJ	P,TYPDEC	;TYPE IN DECIMAL
	TTYSTR	[ASCIZ / hours /]
TYKS.1:	MOVE	T1,(P)		;GET TIME AGAIN
	IDIVI	T1,^D60		;GET MINUTES
	MOVE	T1,T2		; INTO RIGHT AC
	PUSHJ	P,TYPDEC	;TYPE IN DECIMAL
	TTYSTR	[ASCIZ / minutes, at /]
	MSTIME	T1,		;GET TIME OF DAY
	IDIVI	T1,^D60000	;GET MINUTES OF DAY
	POP	P,T2		;RESTORE KSYS TIMER
	ADD	T1,T2		;FIND TIME OF DAY
	CAIL	T1,^D24*^D60	;SEE IF TOMORROW
	SUBI	T1,^D24*^D60	;YES--CORRECT TIME
	IDIVI	T1,^D60		;GET HOURS
	PUSH	P,T2		;SAVE MINUTES
	MOVE	T4,T1		;POSITION HOURS
	PUSHJ	P,TYPD2		;TYPE HOURS AS TWO DIGITS
	POP	P,T4		;RESTORE MINUTES
	PUSHJ	P,TYPD2C	;TYPE AS :TWO DIGITS
	JRST	TYKS.3		;AND FINISH LINE

;HERE IF KSYS TIMER ALREADY RUN OUT
TYKS.2:	TTYSTR	[ASCIZ /Timesharing is over/]
TYKS.3:	TTYSTR	1,[ASCIZ /.
/]
SUBTTL	ERROR HANDLERS

;HERE IF LOGICAL INCONSISTENCY IN PROGRAM--NOTE BP=ADDR. OF PROBLEM

E$$BMB:	INTERR	(BMB,<Bomb out >,<JRST .+1>)
	MOVEI	T1,(BP)		;GET ADDRESS
	SUBI	T1,INITIA+1	;CONVERT TO RELATIVE
	PUSHJ	P,TYPOCT	;ISSUE IN OCTAL
EBMB.1:	OUTSTR	CRLFM		;END LINE
	SUBI	BP,INITIA+1	;SUBTRACT RELOCATION AND PC INCREMENT
	LIGHTS	BP,		;FOR DEBUGGING, SEND TO LIGHTS
	JRST	KILJOB		;GO KILL OFF JOB

SUBTTL	TYPEOUT ROUTINES

;SUBROUTINE TO TYPE THE CONTENTS OF AN EIGHT BITS ASCII STRING BLOCK
;CALL:	MOVEI	T1,STRING BLOCK ADDRESS
;	PUSHJ	P,TYPAS8
;USES T1, T2

TYPAS8:	HLRZ	T2,.NSASL(T1)	;GET THE STRING LENGTH
	JUMPE	T2,CPOPJ	;RETURN NOW IF NULL STRING
	ADD	T1,[POINT 8,.NSAST] ;SET THE BYTE POINTER
	PUSH	P,T1		;SAVE THE BYTE POINTER
TYPA.1:	ILDB	T1,(P)		;GET A BYTE
	TTYCHR	(T1)		;TYPE IT
	SOJG	T2,TYPA.1	;LOOP FOR ALL BYTES
	POP	P,(P)		;CLEAN UP THE STACK
	POPJ	P,		;AND RETURN
;SUBROUTINE TO TYPE TWO DECIMAL DIGITS
;WARNING--THIS DOES NOT HANDLE NEGATIVE NUMBERS OR NUMBERS
;	GREATER THAN 99.
;CALL:	MOVE	T4,NUMBER
;	PUSHJ	P,TYPD2
;USES T1, T2

TYPD2C:	TTYCHR	":"

TYPD2:	MOVE	T1,T4		;GET NUMBER
	IDIVI	T1,^D10		;GET TENS
	TTYCHR	"0"(T1)		;TYPE IT
	TTYCHR	1,"0"(T2)	;TYPE IT AND RETURN



;SUBROUTINE TO TYPE A DECIMAL/OCTAL NUMBER
;CALL:	MOVE	T1,NUMBER
;	PUSHJ	P,TYPDEC/OCT
;USES T1,T2,T3

TYPOCT:	SKIPA	T3,[10]		;SET OCTAL RADIX
TYPDEC:	MOVEI	T3,^D10		;SET DECIMAL RADIX
TYPRAD:	SKIPGE	T1		;IF NEGATIVE,
	TTYCHR	"-"		; ISSUE MINUS
TYPR.1:	IDIVI	T1,(T3)		;GET LOWEST DIGIT
	MOVMS	T2		;GET POSITIVE OF REMAINDER
	HRLM	T2,(P)		;STACK IT
	SKIPE	T1		;UNLESS DONE
	PUSHJ	P,TYPR.1	;  TRY AGAIN
	HLRZ	T1,(P)		;GET TOP DIGIT
	TTYCHR	1,"0"(T1)	;OUTPUT IT AND RETURN

;SUBROUTINE TO TYPE 6 SIXBIT CHARACTERS
;CALL:	MOVE	T2,WORD
;	PUSHJ	P,TYPSX6
;USES T1, T2, T3

TYPSX6:	MOVEI	T3,6		;SET COUNT
TYPS.1:	MOVEI	T1,0		;CLEAR NEXT CHARACTER
	LSHC	T1,6		;GET NEXT CHAR
	TTYCHR	40(T1)		;TYPE IT
	SOJG	T3,TYPS.1	;LOOP UNTIL COUNT DONE
	POPJ	P,		;THEN RETURN

;SUBROUTINE TO TYPE A SIXBIT WORD
;CALL:	MOVE	T2,WORD
;	PUSHJ	P,TYPSIX
;USES T1, T2

TYPSIX:	MOVEI	T1,0		;CLEAR NEXT CHAR
	LSHC	T1,6		;GET NEXT CHAR
	TTYCHR	"A"-'A'(T1)	;TYPE  IT
	JUMPN	T2,TYPSIX	;LOOP UNTIL ALL DONE
	POPJ	P,		;THEN RETURN

;SUBROUTINE TO TYPE AN ASCII STRING IN IMAGE MODE
;CALL:	MOVEI	T2,STRING POINTER
;	PUSHJ	P,SNDIMG
;	RETURN
;USES T2, T6, T7


SNDIMG:	HRLI	T2,(POINT 7,)	;TURN INTO BYTE POINTER
SNDI.1:	ILDB	T7,T2		;GET NEXT CHARACTER
	JUMPE	T7,CPOPJ	;RETURN IF NULL
			;THE FOLLOWING COMES FROM 5.04 UUOCON(PEVEN8)
	MOVEI	T6,(T7)		;MAKE A COPY OF BYTE
	LSH	T6,-4		;FOLD INTO LOW 4 BITS
	XORI	T6,(T7)		; ..
	TRCE	T6,14		;CHECK BITS
	TRNN	T6,14		; 32 AND 33
	TRC	T7,200		;IF EVEN, COMPLIMENT RESULT
	TRCE	T6,3		;CHECK BITS
	TRNN	T6,3		; 34 AND 35
	TRC	T7,200		;IF EVEN, COMPLEMENT RESULT
	IONEOU	T7		;SEND OUT VIA IMAGE MODE
	JRST	SNDI.1		;LOOP BACK FOR MORE
;THIS IS THE LUUO HANDLER
;IT SCRATCHES OC AND PRESERVES ALL OTHERS

LUUO:	MOVE	OC,.JBUUO	;GET UUO
	TLNE	OC,(Z 1,0)	;AC1 ON IN LUUO
	POP	P,(P)		;YES, REMOVE CALL
	LSH	OC,-^D27	;ISOLATE OPCODE
	CAIN	OC,1		;IS IT TTYCHR
	JRST	$TTOUT		;YES--GO PROCESS IT
	CAIN	OC,2		;TTYSTR?
	JRST	$TTSTR		;YES
	CAIN	OC,3		;CTYSTR?
	JRST	$CTSTR		;YES
	CAIN	OC,4		;CTYCHR?
	JRST	$CTCHR		;YES
	OUTSTR	[ASCIZ\? Illegal LUUO\]  ;OOPS
	EXIT			;DIE
;HERE ON A TTYSTR LUUO

$TTSTR:	SKIPE	SILENC		;ARE WE MUTE?
	POPJ	P,		;YES, JUST RETURN NOW
	MOVSI	OC,(POINT 7,)	;SETUP BYTE POINTER
	HLLM	OC,.JBUUO	; IN LOW CORE
TTSTR2:	ILDB	OC,.JBUUO	;GET A BYTE
	JUMPE	OC,CPOPJ	;RETURN ON NULL
	PUSHJ	P,TTCHR1	;TYPE IT
	JRST	TTSTR2		;LOOP OVER STRING

;HERE ON A TTYCHR LUUO
;WARNING--THIS IS IMMEDIATE MODE, UNLIKE OUTCHR

$TTOUT:	SKIPE	SILENC		;ARE WE MUTE?
	POPJ	P,		;YES, JUST RETURN NOW
	HRRZ	OC,.JBUUO	;GET THE BYTE
TTCHR1:	SOSG	TTYCNT		;COUNT DOWN SPACE IN BUFFER
	PUSHJ	P,TTYPBF	;WRITE THE DATA
	IDPB	OC,TTYPNT	;STORE THE BYTE
	AOS	CHRSOU		;COUNT CHARACTERS FOR TYPTTY
	POPJ	P,		;RETURN

;SUBROUTINE TO DUMP THE TTY OUTPUT BUFFER
TTYPBF:	OUT	TTY,		;DO THE OUTPUT
	  POPJ	P,		;ALL IS OK
	STATZ	TTY,IO.ERR	;ANY ERRORS?
	JRST	LOGO1$		;YES--SEEMS SORT OF BAD
	PUSH	P,T1		;SAVE AN AC
	PUSH	P,[EXP ^D10]	;NUMBER OF MINUTES TO WAIT
TTYP.1:	MOVE	T1,[HB.RIO!HB.RWJ+^D6000]
	HIBER	T1,
	  JRST	LOGO1$		;MUST WORK
	OUT	TTY,		;TRY AGAIN
	  JRST	TTYP.2		;WE ARE DONE
	SOSLE	(P)		;KEEP WAITING
	JRST	TTYP.1		;YES--WAIT
	CLRBFO			;NO--BOMB OUT
	JRST	LOGO1$		;GO LOGOUT
TTYP.2:	POP	P,T1
	POP	P,T1
	POPJ	P,
;HERE FOR CTYSTR (OUTSTR TO THE CTY)

$CTSTR:	PUSH	P,T2		;NEED
	PUSH	P,T3		; SOME
	PUSH	P,T4		;  ACS
	HRRZ	T4,.JBUUO	;ADDRESS OF ASCIZ STRING
	MOVE	T3,CTYNUM	;UDX FOR CTY
	MOVEI	T2,.TOOUS	;OUTPUT STRING FUNCTION
	MOVE	OC,[3,,T2]	;TRMOP. ARG POINTER TO
	TRMOP.	OC,		;OUTPUT ASCIZ STRING TO THE CTY
	 JFCL			;OH WELL
	POP	P,T4		;  RESTORE
	POP	P,T3		; USED
	POP	P,T2		;ACS
	POPJ	P,		;RETURN TO CALLER


;HERE FOR CTYCHR LUUO

$CTCHR:	PUSH	P,T2		;NEED
	PUSH	P,T3		; SOME
	PUSH	P,T4		;  ACS
	HRRZ	T4,.JBUUO	;GET CHARACTER TO SEND
	ANDI	T4,177		;AND ONLY THE CHARACTER
	HRRZ	T3,CTYNUM	;UDX FOR THE CTY
	MOVEI	T2,.TOOUC	;SEND CHARACTER FUNCTION
	MOVE	OC,[3,,T2]	;TRMOP. ARG BLOCK TO
	TRMOP.	OC,		;OUTPUT SINGLE CHARACTER TO THE CTY
	 JFCL			;HOHUM
	POP	P,T4		;  RESTORE
	POP	P,T3		; THE
	POP	P,T2		;ACS
	POPJ	P,		;RETURN TO CALLER
SUBTTL	GTNTN. ROUTINE

; SUBROUTINE TO GET NODE,,LINE# FOR DEVICE SPECIFIED IN T1 IN T1

GTNTN$:	GTNTN.	T1,0		; TRY DIRECTLY
	SKIPA			; NOW THE HARD WAY
	POPJ	P,0		; RETURN
	PUSH	P,T1		; SAVE DEVICE NAME
	IONDX.	T1,0		; GET THE LINE # + 200000
	  SETZ	T1,0		; NICE TRY
	TXZ	T1,.UXTRM	; CLEAR BIT 1
	EXCH	T1,(P)		; GET DEVICE AGAIN IN T1
	WHERE	T1,0		; GET THE NODE NUMBER
	  SETZ	T1,0		; NICE TRY
	HRLM	T1,(P)
	POP	P,T1
	POPJ	P,0		; RETURN
	SUBTTL	NDNAM TURN A NODE SPEC INTO A NODE NAME

;NDNAM  --  TRY TO MAKE A NAME OUT OF A NODE SPECIFIER
;CALL IS:
;
;	MOVX	T3,<NODE>
;	PUSHJ	P,NDNAM
;	RETURN
;
;WHERE <NODE> IS SIXBIT NODE NAME, SIXBIT NODE NUMBER, OR OCTAL NODE NUMBER.
;
;ON RETURN T1 WILL HAVE THE NODE NAME IF <NODE> IS MEANINGFUL, OTHERWISE
;T1 WILL HAVE <NODE>, ASSUMING WHOEVER WANTS TO USE IT WILL BE BETTER
;SITUATED TO COMPLAIN ABOUT NO SUCH NODE. T2 WILL HAVE THE NODE NUMBER
;ASSOCIATED WITH THE NAME IN T1, IF ANY.

NDNAM::	PUSH	P,T3		;SAVE INPUT
	CAMN	T3,MYNNAM	;LOCAL (KNOWN) NAME?
	JRST	NDNAM5		;YES, THEN ALL SET
	TLNN	T3,770000	;SIXBIT OF SOME SORT?
	JRST	NDNAM3		;NO, MUST BE OCTAL NODE NUMBER
	MOVE	T1,[.NDRNN,,T2]	;YES, MAY BE SIXBIT NODE NUMBER
	MOVEI	T2,2		;SO ASK MONITOR FOR OCTAL NODE NUMBER
	NODE.	T1,		;SINCE WE CAN'T TELL THE DIFFERENCE
	 JRST	NDNAM5		;JUNK, PRESERVE INPUT
	MOVE	T3,T1		;SET UP NODE NUMBER
NDNAM3:	MOVE	T1,[.NDRNN,,T2]	;ARG POINTER
	MOVEI	T2,2		;AND ARG BLOCK LENGTH
	NODE.	T1,		;TO READ NODE NAME GIVEN NODE NUMBER
NDNAM5:	 MOVE	T1,0(P)		;NO SUCH NODE, RETURN INPUT SPECIFIER
	PUSH	P,T1		;SAVE NODE NAME
	MOVE	T3,T1		;POSITION NAME IN T3
	MOVE	T1,[.NDRNN,,T2]	;ARG POINTER
	MOVEI	T2,2		;AND ARG BLOCK LENGTH
	NODE.	T1,		;TO READ NODE NUMBER FOR NAME
	 SETO	T1,		;NONE KNOWN
	MOVE	T2,T1		;RETURN NODE NUMBER IN T2
	POP	P,T1		;AND NODE NAME IN T1
	POP	P,T3		;ADJUST STACK
	POPJ	P,		;AND RETURN
SUBTTL	SPECIAL TTY SETUP SEQUENCES

;TERMINET 300--SET TABS AT 4,12,... (4 IS THEN C.RET.POINT)

TRMIMG:	BYTE	(7)15,12,33,62,177,177,15,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,40,40,40,40,40,40,40,40,33,61,15,0
SUBTTL	STORAGE AREA

;STORAGE AREA

	XLIST	;LITERALS
	LIT
	LIST

CRLFM:	ASCIZ	/
/


;TABLES SHARED AMONG ALL COPIES OF INITIA
LOCKWD:	EXP	-1		;INTERLOCK FOR HISEG
LOKJOB:	BLOCK	1		;JOB # THAT HAS INTERLOCK
LOKTTY:	BLOCK	1		;ABOVE JOB'S TTY LINE
FRCTRY:	BLOCK	1		;NUMBER OF TIMES WE GOT TO FORCE
FRCCNT:	BLOCK	1		;NUMBER OF TIMES THAT WE ACTUALLY FORCED THE LOCK
ITLCNT:	BLOCK	1		;NUMBER OF TIMES WE THOUGHT WE HAD
				;THE HIGH-SEG INTERLOCK BUT WE DIDN'T
CORCNT:	BLOCK	1		;NUMBER OF TIMES THE CORE UUO TO
				;INCREASE THE HIGH-SEG FAILED
JOBWAT:	BLOCK	<^D512+^D35>/^D36 ;BIT TABLE FOR JOBS WAITING FOR THE INTERLOCK
JBWATL==.-JOBWAT		;NUMBER OF ENTRIES IN THE TABLE

HIPTR:	POINT	7,0		;BYTE POINTER TO TEXT STORAGE
HS$DEV:	BLOCK	N$HSGF		;DEVICE NAMES
HS$FIL:	BLOCK	N$HSGF		;FILE NAMES
HS$EXT:	BLOCK	N$HSGF		;EXTENSIONS
HS$PPN:	BLOCK	N$HSGF		;PPN'S
HS$DAT:	BLOCK	N$HSGF		;DATE/TIME WORDS
HS$PTR:	BLOCK	N$HSGF		;BYTE POINTER TO CONTENTS OF
				; THE FILE.  IF THIS WORD IS 0
				; THE FILE DOES NOT EXIST
	SUBTTL	IMPURE DATA

	RELOC

ZER:!			;START OF AREA TO ZERO ON RESTART
PDL:	BLOCK	L$PDL+1	;PUSH-DOWN LIST
GETCH:	BLOCK	1	;ADDRESS OF TTY INPUT ROUTINE IF ANY
REEAT:	BLOCK	1	;CHARACTER TO REEAT
FILICH:	BLOCK	1	;REUSABLE CHARACTER IN STRIPPER
JUMPPR:	BLOCK	1	;ADDRESS OF SPECIAL STARTUP ROUTINE
SYSPPN:	BLOCK	1	;PPN OF SYS:
MYPPN:	BLOCK	1	;PPN OF THIS JOB
NOPBLK:	BLOCK	.NOPNM+1	;BLOCK FOR NETOP.ING
TERNUM:	BLOCK	1	;INDEX OF THIS TTY
TRMNAM:	BLOCK	1	;SIXBIT CENTRAL NODE TERMAL NAME ("TTYNNN"), EXPANDED
TRMNNM:	BLOCK	1	;SIXBIT NODE RELATIVE TERMINAL NAME (EXPANDED ALSO)
STR8BK:	BLOCK	L$SBLK+.NSAST ;EIGHT BIT ASCII STRING BLOCK
MYTERM:	BLOCK	L$TERM+.NSAST ;EIGHT BIT PORT ID STRING
MYNODE:	BLOCK	L$NNAM+.NSAST ;EIGHT BIT ASCII NODE NAME
MYNUMB:	BLOCK	L$NNAM+.NSAST ;EIGHT BIT ASCII NODE NUMBER
MYNNAM:	BLOCK	1	;SIXBIT NODE NAME
JOBN:	BLOCK	1	;OUR JOB NUMBER
MYBIT:	BLOCK	1	;BIT FOR THIS JOB IN JOBWAT TABLE
MYWRD:	BLOCK	1	;ADDRESS OF THE WORD CONTAING THE BIT
MYSPD:	BLOCK	1	;MY RECEIVE SPEED AS DETECTED
FFAPPN:	BLOCK	1	;PPN OF [1,2]
REQPPN:	BLOCK	1	;REQUESTED PPN
; SYMBOLIC LOCATIONS OF THE FORM "NL.???" STORE VALUES IN THE FORM
; XWD NODE,LINE
NL.CTY:	BLOCK	1	; CENTRAL STATION (CTY)
NL.OPR:	BLOCK	1	; CENTRAL OPR
NL.LOP:	BLOCK	1	; OUR LOCAL OPR
NL.ME:	BLOCK	1	; OUR LOCATION
CTYTTY:	BLOCK	1	; SIXBIT TTY NAME FOR CTY
CTYNUM:	BLOCK	1	;UDX FOR CTY
FLNNUM:	BLOCK	1	;UDX FOR FRCLIN
APRSN:	BLOCK	1	;APR SERIAL NUMBER
IBF:	BLOCK	3	;BUFFER HEADER BLOCK
RUNBLK:	BLOCK	6	;RUN UUO PARAMETERS
ACTSTR:	BLOCK	10	;ACCOUNT STRING FROM TTY.INI
INTBLK:	BLOCK	4	;INTERCEPT BLOCK
TEMP1:	BLOCK	1	; TEMPORARY STORAGE FOR INTERCEPT
NOINT:	BLOCK	1	; IF NEGATIVE DON'T INTERRUPT
SAVEF:	BLOCK	1	;PLACE TO HOLD F
FLKSYS:	BLOCK	1	;FLAG TO TYPE KSYS TIME
FLNAME:	BLOCK	1	;FLAG NONAME (SUPPRESS HEADER LINE)
FLSET:	BLOCK	1	;FLAG NOSETTTY (SUPRESS TTY SETUP)
FLSTR:	BLOCK	1	;FLAG TO DO STRUCTURE NOTES
FLTEXT:	BLOCK	1	;FLAG TO PRINT TEXT MSG
FLNOTC:	BLOCK	1	;FLAG TO TYPE NOTICE.TXT
FLTTY:	BLOCK	1	;FLAG TO TYPE TTY SETTINGS
DIAL:	BLOCK	2	;NUMBER TO DIAL
LOCAT:	BLOCK	1	; LOCATE USER
NODBLK:			;START OF NODE. UUO ARGUMENT BLOCK
NODLEN:	BLOCK	1	;LENGTH OF NODE UUO ARGUMENT BLOCK
NODLOC:	BLOCK	1	;NODE NUMBER
	BLOCK	1	;RESERVED ARGUMENT
NODDEV:	BLOCK	1	;NUMBER OF DEVICES,,DEVICE TYPE
FILCWT:	BLOCK	1	;SLEEP COUNTER IN FILCON
;TTY PARAMETERS

ALT:	BLOCK	1	;TTY ALT
BLANK:	BLOCK	1	;TTY BLANK
CRLF:	BLOCK	1	;TTY CRLF
DEBR:	BLOCK	1	;TTY DEBREAK
DISP:	BLOCK	1	;TTY DISPLAY
ECHO:	BLOCK	1	;TTY ECHO
ECHDEF:	BLOCK	1	;TTY DEFER
EIGHT:	BLOCK	1	;TTY EIGHTBIT
ELEM:	BLOCK	1	;TTY ELEMENT
ESCAPE:	BLOCK	1	;TTY ESCAPE
FILL:	BLOCK	1	;TTY FILL
FORM:	BLOCK	1	;TTY FORM
GAG:	BLOCK	1	;TTY GAG
HDX:	BLOCK	1	;TTY HDX
IDLE:	BLOCK	1	;TTY IDLEDISC
LC:	BLOCK	1	;TTY LC
LENGTH:	BLOCK	1	;TTY LENGTH
PAGEON:	BLOCK	1	;TTY PAGE
PAGE:	BLOCK	1	;TTY PAGE:N
QUOTE:	BLOCK	1	;TTY QUOTE
RCV:	BLOCK	1	;TTY RCVSPEED
REM:	BLOCK	1	;TTY REMOTE
RTCOMP:	BLOCK	1	;TTY RTCOMP
SBELL:	BLOCK	1	;TTY SBELL (RING BELL ON AUTO-STOP)
SLAVE:	BLOCK	1	;TTY SLAVE
SSIZE:	BLOCK	1	;TTY STOP N (THE "N" OF STOP EVERY N LINES)
SSTOP:	BLOCK	1	;TTY SSTOP
STOP:	BLOCK	1	;TTY STOP
TAB:	BLOCK	1	;TTY TAB
TAPE:	BLOCK	1	;TTY TAPE
TIDY:	BLOCK	1	;TTY TIDY
TYPE:	BLOCK	1	;TTY TYPE
UNPAUS:	BLOCK	1	;TTY UNPAUSE
WIDTH:	BLOCK	1	;TTY WIDTH
XMT:	BLOCK	1	;TTY XMTSPEED
XONXOF:	BLOCK	1	;TTY XONXOF
LOWPTR:	BLOCK	1	;POINTER TO HISEG TEXT
CHRSOU:	BLOCK	1	;COUNT OF CHARACTERS OUTPUT FOR TYPTTY
SILENC:	BLOCK	1	;DON'T TYPE ANYTHING ON TTY IF NONZERO
TTYOBF:	BLOCK	1	;TTY OUTPUT RING HEADER
TTYPNT:	BLOCK	1	;TTY OUTPUT BYTE POINTER
TTYCNT:	BLOCK	1	;TTY OUTPUT BYTE COUNT
TTYBUF:	BLOCK	L$TTBF+3 ;SIZE OF OUTPUT BUFFER

FLNCNT:	BLOCK	1	;BYTE COUNTER FOR TYPER
FLNPNT:	BLOCK	1	;BYTE POINTER FOR TYPER
FLNBUF:	BLOCK	<FLN$MX+4>/5	;BYTE BUFFER FOR TYPER

GETSTR:	BLOCK	5	;ARGUMENT BLOCK FOR GOBSTR UUO
STRBLK:	BLOCK	1+3*N$STRS	;ARGUMENT BLOCK FOR STRUUO
ENDSTR==.

IPCMHD:	BLOCK	.IPCMP+1 ;HEADER BLOCK FOR IPCFM.
IPCCBK:	BLOCK	.IPCS2+1 ;[SYSTEM]IPCC MESSAGE BLOCK

TTWFLG:	BLOCK	1	;FLAG THAT WE WILL/ARE STOMP/ING
TTWNRI:	BLOCK	1	;TOTAL CHARACTER COUNT
TTWNTM:	BLOCK	1	;LAST TIMER
TTWPCT:	BLOCK	1	;POINTER (INDEXES T7) TO LINE-DEPENDENT CHAR COUNT
TTWPTM:	BLOCK	1	;POINTER (INDEXES T7) TO PARALLEL TIME OF LAST SAMPLE
TTWPRS:	BLOCK	1	;POINTER (INDEXES T7) TO CHANNEL,,.TORSP
LINTAB:	BLOCK	1	;POINTER (INDEXES T7) TO ENTRY IN MAPPED LINTAB
TTWMCN:	BLOCK	1	;HIGHEST CHANNEL WE ARE USING.
LDBOFF:	BLOCK	1	;OFFSET FROM MONITOR LDB ADDR TO USER LDB ADDR.

EZER:	BLOCK	0	;LAST LOCATION, GETS ZEROED

	END	INITIA